Webinars LabRulezLCMS Week 9/2023

In the week from February 27, the following webinars await you in the field of liquid phase and especially HPLC and LC/MS.

👉 DETAILS AND REGISTRATION IN THE WEBINARS SECTION

👉 Search and filter in almost 2 500 GC, LC nad MS webinars

0. Shimadzu Corporation: Revolutionary Single Quad LC-MS for Drug Development and Quality Control

• Tu, 28.2.2023, 20:00 (CET)
• Registration

This webinar will demonstrate an LC-MS system that can perform both LC-MS analysis and LC-UV analysis.

1. Waters Corporation: Improving Chromatographic performance to next level with Waters Premier technology

• Th, 2.3.2023, 06:30 (CET)
• Registration

The ACQUITY Premier system minimizes the analyte loss, improving recovery, and limits of detection.

2. Wiley Analytical Science/JMP Statistical Discovery: Making better use of Spectral and Chromatographic Data in product and process development

• Th, 2.3.2023, 11:00 (CET)
• Registration

This webinar will present a simple and efficient way of extracting the signals from the noise for a deeper, better understanding of your processes and products.

3. Waters Corporation: Virtual European Workshops on Extractables & Leachables for Pharma & Biopharma

• Th, 2.3.2023, 14:00 (CET)
• Registration

Register now for this virtual event and share knowledge and challenges with peers and E&L experts.

4. The Analytical Scientist/ACD/Labs: How to Overcome the Challenges of Analytical Data Management

• Th, 2.3.2023, 16:00 (CET)
• Registration

The challenges related to analytical data that cross organizations and industries; and lessons learned through their own experience.

5. Waters Corporation: ION-EXCHANGE SEPARATIONS AND BEST PRACTICES FOR SALTY SEPARATIONS

• Th, 2.3.2023, 16:30 (CET)
• Registration

This webinar series will cover the foundations of chromatography for the separation and analysis of peptides and proteins.

6. Agilent Technologies: UV-Vis Instrumentation : From Routine to Advanced Applications Part I

• Th, 2.3.2023, 20:00 (CET)
• Registration

The focus of Part I of this two part series will be on entry level and the mid-performance instrumentation and what is needed to make a variety of measurements.