TMSI + Pyridine - Product Specification
Summary
Importance of the Topic
Derivatization of hydroxyl and carboxyl groups via silylation greatly enhances volatility, thermal stability and chromatographic behavior of many polar analytes. The TMSI+pyridine reagent is particularly valuable in analytical chemistry for preparing gas chromatographic samples from sugars, steroids, fatty acids, amino acids and other compounds bearing active hydrogens.
Objectives and Overview
This product specification outlines the properties, reaction mechanism, sample preparation procedures and practical considerations for using a blend of N-trimethylsilylimidazole (TMSI) and pyridine (1:4 ratio) as a versatile silylating reagent. The goal is to derive guidelines for efficient, reproducible derivatization suited to challenging substrates and GC analysis.
Methodology and Instrumentation
The typical derivatization protocol involves:
- Weighing 1–10 mg of sample in a 5 mL dry vessel, evaporating water if necessary.
- Adding an excess (≥ 2:1 molar) of TMSI+pyridine reagent, optionally diluted with nonpolar (hexane, toluene) or polar (DMF, DMSO, THF) solvents.
- Allowing silylation to proceed at room temperature or with gentle heating (up to 70 °C) until GC monitoring shows no further increase in product peaks. Extended reactions (up to 16 h) may be required for hindered compounds.
Instrumental considerations:
- Use inert glass injection liners or direct on-column injection; avoid stainless steel ports and polar stationary phases.
- Recommended columns include nonpolar silicone phases (SPB-1, SPB-5) and polar phases (SPB-1701, SP-2250, SP-2330) for analyte classes from hydrocarbons to fatty acid methyl esters.
Key Results and Discussion
TMSI efficiently replaces active hydrogens in –OH, –COOH, =NH, –NH2 and –SH groups to produce trimethylsilyl derivatives that are less polar and more volatile. The inclusion of pyridine accelerates reactions with hindered substrates and scavenges HCl by-products. The relative ease of derivatization follows functional group reactivity: alcohols > phenols > carboxylic acids > amines > amides, further modulated by steric effects (primary > secondary > tertiary).
Benefits and Practical Applications
- Rapid, complete silylation of wet sugar samples without rigorous drying.
- Effective derivatization of steroids, prostaglandins, fatty acids and amino acids.
- Adaptable to multiderivatization schemes combining silylation with acylation.
- Thermally stable derivatives compatible with GC analysis.
Future Trends and Potential Applications
Emerging directions include coupling TMSI+pyridine derivatization with advanced GC-MS and GC-MS/MS techniques for metabolomics, lipidomics and environmental monitoring. Integration with high-throughput workflows and automated sample preparation platforms can expand its use in pharmaceutical and clinical laboratories.
Conclusion
The TMSI+pyridine reagent offers a robust, versatile approach for silylation of diverse functional groups under mild conditions. Its compatibility with a range of solvents, ease of handling and ability to produce stable, volatile derivatives make it a key tool in GC analysis workflows.
References
- K. Blau and J. Halket, Handbook of Derivatives for Chromatography, 2nd ed., John Wiley & Sons, New York, 1993.
- D.R. Knapp, Handbook of Analytical Derivatization Reactions, John Wiley & Sons, New York, 1979.
Content was automatically generated from an orignal PDF document using AI and may contain inaccuracies.
©1997 Sigma-Aldrich Co.
Product Specification
SUPELCO
T496030A
TMSI+Pyridine
796-0260, 0269
TMSI (N-trimethylsilylimidazole) is the strongest reagent for
hydroxyls. It reacts quickly and smoothly with hindered and
unhindered hydroxyl and carboxyl groups. TMSI+Pyridine is useful
for derivatizing wet sugar samples, hindered hydroxyl groups in
steroids and, in conjunction with fluorinated acylation reagents,
amino acids. For moderately hindered or slowly reacting com-
pounds, pyridine is an especially useful solvent for TMSI because
of its ability to act as an HCl acceptor in silylation reactions
involving organochlorosilanes.
Features/Benefits
TMSI is useful for derivatizing alcohols, hormones, fatty and other
organic acids, phenols, prostaglandins, steroids, sulfonic acids,
and thiols. It derivatizes sugars in the presence of small amounts
of water. It also is useful in multiderivatization schemes containing
hydroxyl and amine groups.
TMSI does not react with amines or amides.
TMS derivatives are thermally stable but more susceptible to
hydrolysis than their parent compounds.
Typical Procedure
This procedure is intended to be a guideline and may be adapted
as necessary to meet the needs of a specific application. Always take
proper safety precautions when using a silylating reagent – consult
MSDS for specific handling information. TMSI+pyridine is ex-
tremely sensitive to moisture and should be handled under dry
conditions.
Prepare a reagent blank (all components, solvents, etc., except
sample), following the same procedure as used for the sample.
1. Weigh 1-10mg of sample into a 5mL reaction vessel. If
appropriate, dissolve sample in solvent (see below). If sample
is in aqueous solution, evaporate to dryness, then use neat or
add solvent.
2. Add excess silylating reagent. TMSI+pyridine (1:4) can be
used at full strength or with a solvent.* In most applications
it is advisable to use an excess of the silylating reagent – at least
a 2:1 molar ratio of TMSI+pyridine to active hydrogen.
3. Allow the mixture to stand until silylation is complete. To
determine when derivatization is complete, analyze aliquots
of the sample at selected time intervals until no further
increase in product peak(s) is observed.
Derivatization times vary widely, depending upon the specific
compound(s) being derivatized. Many compounds are com-
pletely derivatized as soon as they dissolve in the reagent.
Compounds with poor solubility may require warming. A few
compounds will require heating at 70°C for 20-30 minutes.
Under extreme conditions compounds may require heating
for up to 16 hours to drive the reaction to completion.
If derivatization is not complete, the addition of a catalyst, use
of an appropriate solvent, higher temperature, longer time
and/or higher reagent concentration should be evaluated.
Use a glass injection port liner or direct on column injection when
working with silylating reagents. Erratic and irreproducible results
are more common when stainless steel injection ports are used.
TMS derivatives and silylating reagents react with and are sensitive
to active hydrogen atoms. Do not analyze TMSI+pyridine deriva-
tives on stationary phases with these functional groups (e.g.,
polyethylene glycol phases). Silicones are the most useful phases
Properties
TMSI Structure:
CAS Number: 18156-74-6
Molecular
Formula:
(CH
3)3SiNCH=NCH=CH
Formula Weight: 140.26
bp: 93-94°/14mm
Flash Point: 42°F (5°C)
d: 0.956
n
D: 1.4750 at 20°C
Appearance:
clear, colorless to light yellow liquid
moisture sensitive
Pyridine Structure:
CAS Number: 110-86-1
Molecular
Formula: C5H5N
Formula Weight: 79.10
bp: 115-117°C
Flash Point: 68°F (20°C)
d: 0.978
n
D: 1.5100 at 20°C
Appearance:
clear, colorless liquid which has an odor
for TMS derivatives – they combine inertness and stability with
excellent separating characteristics for these derivatives. Nonpolar
silicone phases include SPB™-1 and SPB-5. Normal hydrocarbons
(carbon-hydrogen analytes with single bonds) are separated by
these phases. More polar phases, SPB-1701 and SP-2250, separate
carbon-hydrogen analytes that also contain Br, Cl, F, N, O, P, or S
atoms or groups. A highly polar cyanopropylphenylsiloxane phase,
SP-2330, is useful for separating fatty acid methyl esters or aromat-
ics.
*Nonpolar organic solvents such as hexane, ether, benzene, and toluene are excellent
solvents for the reagent and the reaction products; they do not accelerate the rate
of reaction. Polar solvents such as pyridine, dimethylformamide (DMF), dimethylsul-
foxide (DMSO), tetrahydrofuran (THF), and acetonitrile are more often used because
they can facilitate the reaction. Pyridine is an especially useful solvent because it
can act as an HCl acceptor in silylation reactions involving organochlorosilanes.
For more information, or current prices, contact your nearest Supelco subsidiary listed below. To obtain further contact information, visit our website (www.sigma-aldrich.com), see the Supelco catalog, or contact
Supelco, Bellefonte, PA 16823-0048 USA.
ARGENTINA · Sigma-Aldrich de Argentina, S.A. · Buenos Aires 1119 AUSTRALIA · Sigma-Aldrich Pty. Ltd. · Castle Hill NSW 2154 AUSTRIA · Sigma-Aldrich Handels GmbH · A-1110 Wien
BELGIUM · Sigma-Aldrich N.V./S.A. · B-2880 Bornem BRAZIL · Sigma-Aldrich Quimica Brasil Ltda. · 01239-010 São Paulo, SP CANADA · Sigma-Aldrich Canada, Ltd. · 2149 Winston Park Dr., Oakville, ON L6H 6J8
CZECH REPUBLIC · Sigma-Aldrich s.r.o.· 186 00 Praha 8 DENMARK · Sigma-Aldrich Denmark A/S · DK-2665 Vallensbaek Strand FINLAND · Sigma-Aldrich Finland/YA-Kemia Oy · FIN-00700 Helsinki
FRANCE · Sigma-Aldrich Chimie · 38297 Saint-Quentin-Fallavier Cedex GERMANY · Sigma-Aldrich Chemie GmbH · D-82041 Deisenhofen GREECE · Sigma-Aldrich (o.m.) Ltd. · Ilioupoli 16346, Athens
HUNGARY · Sigma-Aldrich Kft. · H-1067 Budapest INDIA · Sigma-Aldrich Co. · Bangalore 560 048 IRELAND · Sigma-Aldrich Ireland Ltd. · Dublin 24 ISRAEL · Sigma Israel Chemicals Ltd. · Rehovot 76100
ITALY · Sigma-Aldrich s.r.l. · 20151 Milano JAPAN · Sigma-Aldrich Japan K.K. · Chuo-ku, Tokyo 103 KOREA · Sigma-Aldrich Korea · Seoul MALAYSIA · Sigma-Aldrich (M) Sdn. Bhd. · 58200 Kuala Lumpur
MEXICO · Sigma-Aldrich Química S.A. de C.V. · 50200 Toluca NETHERLANDS · Sigma-Aldrich Chemie BV · 3330 AA Zwijndrecht NORWAY · Sigma-Aldrich Norway · Torshov · N-0401 Oslo
POLAND · Sigma-Aldrich Sp. z o.o. · 61-663 Poznañ PORTUGAL· Sigma-Aldrich Quimica, S.A. · Sintra 2710 RUSSIA · Sigma-Aldrich Russia · Moscow 103062 SINGAPORE · Sigma-Aldrich Pte. Ltd.
SOUTH AFRICA · Sigma-Aldrich (pty) Ltd. · Jet Park 1459 SPAIN · Sigma-Aldrich Quimica, S.A. · 28100 Alcobendas, Madrid SWEDEN · Sigma-Aldrich Sweden AB · 135 70 Stockholm
SWITZERLAND · Supelco · CH-9471 Buchs UNITED KINGDOM · Sigma-Aldrich Company Ltd. · Poole, Dorset BH12 4QH
UNITED STATES · Supelco · Supelco Park · Bellefonte, PA 16823-0048 · Phone 800-247-6628 or 814-359-3441 · Fax 800-447-3044 or 814-359-3044 · email:[email protected]
H
Supelco is a member of the Sigma-Aldrich family. Supelco products are sold through Sigma-Aldrich, Inc. Sigma-Aldrich warrants that its products conform to the information contained in this and other
Sigma-Aldrich publications. Purchaser must determine the suitability of the product for a particular use. Additional terms and conditions may apply. Please see the reverse side of the invoice or packing slip.
Mechanism (1,2)
Silylation is the most widely used derivatization procedure for GC
analysis. In silylation, an active hydrogen is replaced by an alkylsilyl
group, most often trimethylsilyl (TMS). Compared to their parent
compounds, silyl derivatives generally are more volatile, less polar,
and more thermally stable.
Silyl derivatives are formed by the displacement of the active
proton in –OH, –COOH, =NH, –NH
2, and –SH groups. The general
reaction for the formation of trialkylsilyl derivatives is shown
above.
The reaction is viewed as a nucleophilic attack upon the silicon
atom of the silyl donor, producing a bimolecular transition state.
The silyl compound leaving group (X) must posses low basicity,
the ability to stabilize a negative charge in the transition state, and
little or no tendency for
π (p-d) back bonding between itself and
the silicon atom.
The ideal silyl compound leaving group (X) must be such that it
is readily lost from the transition state during reaction, but pos-
sesses sufficient chemical stability in combination with the alkyl
silyl group to allow long term storage of the derivatizing agent for
use as required. As the formation of the transition state is reversible,
the derivatization will only proceed to completion if the basicity of
the leaving group X exceeds that of the group it replaces. The ease
of derivatization of various functional groups for a given silyating
agent follows this order: alcohol > phenol > carboxylic acid > amine
> amide. Within this sequence reactivity towards a particular
silylating reagent will also be influenced by steric hindrance, hence
the ease of reactivity for alcohols follows the order: primary >
secondary > tertiary, and for amines: primary > secondary.
Toxicity – Hazards – Storage – Stability
TMSI+pyridine is a flammable, moisture-sensitive liquid. It may
irritate eyes, skin, and/or the respiratory system. Store in a brown
bottle or amber ampul at room temperature, in a dry, well venti-
lated area away from ignition sources. Use only in a well ventilated
area and keep away from ignition sources.
Properly stored, this reagent is stable indefinitely. Recommended
storage conditions for the unopened product are stated on the
label. Moisture will decompose both TMS reagents and deriva-
tives. To exclude moisture, Supelco packages this product under
nitrogen. If you store an opened container or transfer the contents
to another container for later reuse, add desiccant. Before reuse,
validate that your storage conditions adequately protected the
reagent.
References
1.
K. Blau and J. Halket
Handbook of Derivatives for Chromatography (2nd
ed.) John Wiley & Sons, New York, 1993.
2.
D.R. Knapp
Handbook of Analytical Derivatization Reactions John Wiley &
Sons, New York, 1979.
Ordering Information
Description
Cat. No.
TMSI+Pyridine, 1:4
20 ampuls x 1mL
33159
25mL
33037
For information about TMSI reagent, refer to Product Specification T496029.
Microreaction Vessels with Hole Caps and Septa
1mL, pk. of 12
33293
3mL, pk. of 12
33297
5mL, pk. of 12
33299
Books
Handbook of Derivatives for Chromatography
K. Blau and J. Halket
Z246220
Handbook of Analytical Derivatization Reactions
D.R. Knapp
23561
Adapted from Knapp (2).
796-0130
For TMSI,
X = NCH=NCH=CH
For Pyridine,
X = C
5H5N
Contact our Technical Service Department (phone 800-359-3041
or 814-359-3041, FAX 800-359-3044 or 814-359-5468)
for expert answers to your questions.
AWR
Similar PDF
Key words
Key words
Key words
