Scientists at IOCB Prague are uncovering new details of gene transcription. They have identified a previously unknown molecular mechanism by which the transcription of genetic information from deoxyribonucleic acid (DNA) into ribonucleic acid (RNA) can be initiated. The researchers focused on a specific class of molecules known as alarmones, which are found in cells across a wide range of organisms and whose levels often increase under conditions of cellular stress. The results were published in the prestigious scientific journal Nature Chemical Biology.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/UOCHB_Vyzkum_z_UOCHB_odhaluje_dosud_nepoznany_zpusob_prepisu_geneticke_informace_bc2bfffa6c.jpg" alt="IOCB Prague/Tomáš Belloň: Research from IOCB Prague reveals a previously unknown mechanism of genetic transcription: Dr. Hana Cahová, head of the Chemical Biology of Nucleic Acids research group." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_UOCHB_Vyzkum_z_UOCHB_odhaluje_dosud_nepoznany_zpusob_prepisu_geneticke_informace_bc2bfffa6c.jpg 234w," sizes="100vw" width="2000" height="1335"><div>Molecules of ribonucleic acid can carry a variety of chemical modifications at one end, known as caps. In eukaryotic organisms, including human cells, the best-known cap plays an important role in RNA stability and in regulating its subsequent fate. In recent years, however, it has become clear that alternative, non-canonical RNA caps also exist, although their formation and the mechanisms by which they are attached to RNA remain only partially understood. These include alarmone caps, formed by dinucleoside polyphosphate molecules, that protect cellular RNA at moments when the cell is under threat.In their study, <a target="_blank" rel="noopener noreferrer" href="https://cahova.group.uochb.cz/en">Dr. Hana Cahová</a> and colleagues examined bacterial RNA polymerase and investigated how this enzyme can initiate transcription using dinucleoside polyphosphates (NpNs) instead of the standard RNA building blocks. For the first time, the scientists described, at the atomic level, how RNA bearing an alarmone cap can be generated directly at the initiation of gene transcription. They also observed that NpNs bind through a different type of base pairing than is typically observed.The work was significantly shaped by Valentina Serianni from Hana Cahová’s team, who demonstrated the ability of dinucleoside polyphosphates to initiate gene transcription, and by Jana Škerlová, who focused on the structural analysis of RNA polymerase. Using cryogenic electron microscopy data, she showed how dinucleoside polyphosphate molecules bind within the active site of RNA polymerase – that is, the core of the enzyme where genetic information is transcribed. Together, their findings help to elucidate the processes that accompany the transcription of genetic information from DNA to RNA.Hana Cahová adds: “We’re describing something that truly occurs in cells and that we’re now able to observe directly at the level of individual molecules. This allows us to answer fundamental questions about cellular processes, such as how cells adapt to stress. RNA plays a central role in this, as it carries the cascade of information underlying any cellular response – for example, to threatening conditions caused by nutrient deprivation or temperature shock.”<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/UOCHB_Vyzkum_z_UOCHB_odhaluje_dosud_nepoznany_zpusob_prepisu_geneticke_informace_2_0fe88ff9e9.jpg" alt="IOCB Prague/Tomáš Belloň: Research from IOCB Prague reveals a previously unknown mechanism of genetic transcription: Dr. Tomáš Kouba, head of the Cryogenic Electron Microscopy core facility." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_UOCHB_Vyzkum_z_UOCHB_odhaluje_dosud_nepoznany_zpusob_prepisu_geneticke_informace_2_0fe88ff9e9.jpg 234w," sizes="100vw" width="2000" height="1335"><div>Cryogenic electron microscopy (cryo-EM) was central to the project. This part of the work was led by Dr. Tomáš Kouba, one of the authors of the study. “Cryogenic electron microscopy allows us to freeze biological molecules in a state very close to their natural form and then determine their three-dimensional structure. This makes it possible to look directly into the active centers of enzymes and observe their function down to the atomic level,” he explains.Last year, IOCB Prague opened a new <a target="_blank" rel="noopener noreferrer" href="https://cryoem.group.uochb.cz/en">cryo-EM center</a> that is unique within the Czech research environment. State-of-the-art cryogenic electron microscopes are housed in a specially designed building and enable the study of biological processes with exceptional structural precision.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/UOCHB_Vyzkum_z_UOCHB_odhaluje_dosud_nepoznany_zpusob_prepisu_geneticke_informace_3_4d881e7a58.jpg" alt="IOCB Prague: Research from IOCB Prague reveals a previously unknown mechanism of genetic transcription: This work shows how NpnNs initiate bacterial transcription. Cryo-EM reveals how nucleobases pair with the template: one in canonical and one in reverse Watson–Crick mode, providing a structural basis for their function as non-canonical RNA caps." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_UOCHB_Vyzkum_z_UOCHB_odhaluje_dosud_nepoznany_zpusob_prepisu_geneticke_informace_3_4d881e7a58.jpg 245w," sizes="100vw" width="2000" height="1077"><blockquote><h4>The Original article</h4><h4><a target="_blank" rel="noopener noreferrer" href="https://www.nature.com/articles/s41589-025-02134-5">Molecular insight into 5′ RNA capping with NpnNs by bacterial RNA polymerase</a></h4>Valentina M. Serianni, Jana Škerlová, Anna Knopp Dubánková, Anton Škríba, Hana Šváchová, Tereza Vučková, Anatolij Filimoněnko, Milan Fábry, Pavlína Řezáčová, Tomáš Kouba &amp; Hana Cahova&nbsp;Nat. Chem. Biol. 21 (2026)<a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1038/s41589-025-02134-5">https://doi.org/10.1038/s41589-025-02134-5</a><h6>licensed under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/">CC-BY 4.0</a></h6></blockquote><h4>Abstract</h4>RNA capped with dinucleoside polyphosphates has been discovered in bacteria and eukaryotes only recently. The likely mechanism of this specific capping involves direct incorporation of dinucleoside polyphosphates by RNA polymerase as noncanonical initiating nucleotides. However, how these compounds bind into the active site of RNA polymerase during transcription initiation is unknown. Here, we explored transcription initiation in vitro, using a series of DNA templates in combination with dinucleoside polyphosphates and model RNA polymerase from Thermus thermophilus. We observed that the transcription start site can vary on the basis of the compatibility of the specific template and dinucleoside polyphosphate. Cryo-electron microscopy structures of transcription initiation complexes with dinucleoside polyphosphates revealed that both nucleobase moieties can pair with the DNA template. The first encoded nucleotide pairs in a canonical Watson–Crick manner, whereas the second nucleobase pairs noncanonically in a reverse Watson–Crick manner. Our work provides a structural explanation of how dinucleoside polyphosphates initiate RNA transcription.</div></div>

Research from IOCB Prague reveals a previously unknown mechanism of genetic transcription

Food adulteration is a phenomenon with a long history that has gained increasing importance in recent years due to the globalization of food supply chains and strong economic pressures. Whether it involves diluting olive oil with cheaper oils, adding sugar to honey, or the hidden use of substitutes in protein supplements, the result is a loss of consumer trust and, in some cases, a potential risk to health. Analytical chemistry plays a key role in this area by providing methods and technologies capable of identifying and quantifying target compounds as well as unwanted impurities in a wide range of food matrices.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Praha_Falsovani_potravin_a_jak_ho_odhali_analyticka_chemie_6912db5492.jpg" alt="Watrex: Food Adulteration and How It Is Revealed by Analytical Chemistry" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Watrex_Praha_Falsovani_potravin_a_jak_ho_odhali_analyticka_chemie_6912db5492.jpg 245w," sizes="100vw" width="1600" height="900"><h4>The Role of Chromatography in Forensic Food Analysis</h4>Chromatography, particularly liquid chromatography (HPLC), is one of the most effective analytical tools for separating complex mixtures of molecules. It enables:<ul><li>qualitative identification of individual components in a sample,</li><li>quantitative determination of their concentrations,</li><li>detection of impurities and unexpected components that may indicate adulteration.</li></ul>In practice, HPLC is often combined with various types of detectors (UV/VIS, DAD, refractive index detectors) or with other techniques (e.g., mass spectrometry) to increase selectivity and sensitivity.<h4>Isocratic vs. Gradient Elution</h4>In the analysis of food samples, chromatographic methods are selected according to the analytical goal:<ul><li>Isocratic HPLC uses a constant mobile phase composition throughout the analysis. It is simple, robust, and ideal for routine determinations of well-defined target analytes (e.g., sugars or vitamins).</li><li>Gradient HPLC changes the mobile phase composition during separation, enabling better resolution of complex mixtures with a wide range of polarities (e.g., peptides or phenolic compounds).</li></ul>Gradient methods are particularly useful when analytes have very different properties and high separation efficiency is required.<h4>Watrex Praha and the Contribution of Modern Systems to Food Analysis</h4><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_clanky_HPLCsystemy">Watrex Praha, s.r.o.</a> is one of the leading Czech manufacturers and distributors of liquid chromatography systems and instruments, with a long tradition dating back to 1990. The company has successfully transformed from a distributor into a manufacturer of its own HPLC and related technologies, focusing on modular, robust systems suitable even for demanding analytical tasks.Their <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products?manufacturerItems=93&amp;search=streamline">Streamline™ product line</a> includes several HPLC system concepts suitable for food analysis:<ul><li>Isocratic HPLC system – a simple yet precise configuration with a single pump, column thermostat, and UV/VIS detector; suitable for routine determination of known analytes (e.g., basic carbohydrates, food additives).</li><li>Binary gradient HPLC system – equipped with two pumps enabling mobile phase gradient formation, which enhances separation performance for complex mixtures (e.g., phenolic profiles of wine, components of aromatic extracts).</li><li>GPC/SEC system (Gel Permeation / Size Exclusion Chromatography) – a specialized solution for the determination of macromolecules and polymers, also relevant for the analysis of high-molecular-weight components in foods (e.g., polysaccharides).</li></ul><blockquote>👉<a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/Watrex_catalog_2024_ba97395f92.pdf">Product catalogue HERE</a></blockquote>Thanks to the modular nature of these systems, analysts can easily adapt the configuration to a specific analytical problem, from simple routine analyses to complex characterization of food samples.<h4>Practical Examples of Adulteration Revealed by HPLC</h4><ul><li>Detection of olive oil dilution: HPLC can separate and quantify characteristic triacylglycerols and fatty acids; unusual patterns indicate the presence of cheaper oils.</li><li>Estimation of sugar addition in honey: Isocratic HPLC with a refractive index detector can determine sugar profiles (glucose, fructose, sucrose), revealing dilution or the addition of sugar syrups.</li><li>Identification of aromatic adulterants in wine: Gradient HPLC with a PDA detector can reveal phenolic and aromatic profiles that are altered by the addition of synthetic compounds.</li></ul><h4>Conclusion</h4>Food adulteration remains a current issue that requires reliable and sensitive analytical methods. Liquid chromatography, and in particular modern HPLC systems, represent one of the most powerful tools for detecting unwanted additives, impurities, and unexpected components in complex food samples. Manufacturers such as <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_clanky_HPLCsystemy">Watrex Praha</a> provide flexible chromatographic platforms covering a wide range of analytical tasks from simple isocratic to advanced gradient and GPC/SEC applications thereby supporting analysts in ensuring food quality and consumer protection.<blockquote>Did you find this article interesting? Follow <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_clanky_HPLCsystemy">Watrex Praha</a> on their social media (<a target="_blank" rel="noopener noreferrer" href="https://www.linkedin.com/company/watrex/?viewAsMember=true">LinkedIn</a> and <a target="_blank" rel="noopener noreferrer" href="https://www.facebook.com/WatrexPrague">Facebook</a>) for more engaging topics.</blockquote>

Food Adulteration and How It Is Revealed by Analytical Chemistry

Join us for a fascinating conversation with Dr. Subhoja Chakraborty from the University of Central Florida, whose cutting-edge research targets the global challenge of malaria drug resistance. Dr. Chakraborty shares her journey from structure-based drug design during her PhD to her recent collaborative work repurposing human kinase inhibitors as rapid, selective antimalarials against drug-resistant Plasmodium falciparum strains.<h4>In this episode, you'll learn:</h4><ul><li>How structure-guided approaches reveal potential drug targets, including cysteine proteases like falcipain-2, and kinases implicated in malaria's complex life cycle.</li><li>The power of repurposing kinase inhibitors originally developed for cancer and other diseases, focusing on compound 12, which blocks hemozoin formation and protein kinase 6—key steps in parasite survival.</li><li>Lab techniques such as affinity, gel filtration, and size exclusion chromatography for recombinant protein purification—and how troubleshooting is crucial for high-yield, stable complexes.</li><li>Advances in mass spectrometry for characterizing protein interactions, validating drug targets, and mapping molecular pathways pivotal to malaria therapeutics.</li><li>Tips and lessons for new researchers facing the challenges of sample preparation, complex protocols, and working as part of a collaborative team.</li></ul>Dr. Chakraborty’s insights bridge the gap between basic science and translational drug discovery, offering hope for more effective, targeted malaria treatments in a world where resistance to frontline therapies threatens millions.<h4>Referenced Papers:</h4><ul><li>"Plasmodium falciparum protein kinase 6 and hemozoin formation are inhibited by a type II human kinase inhibitor exhibiting antimalarial activity" (Cell Chemical Biology, 2025)</li><li>"New insights of falcipain 2 structure from Plasmodium falciparum 3D7 strain" (BBRC, 2022)</li><li>"Structure-Based Optimization of Protease−Inhibitor Interactions to Enhance Specificity of Human Stefin‑A against Falcipain‑2 from the Plasmodium falciparum 3D7 Strain" (Biochemistry, 2023)</li></ul>If you’re a student, scientist, or simply passionate about advances in infectious disease research, this episode offers actionable insights, inspiring advice, and a front-row seat to innovation in combating malaria.<h3>Video Transcription</h3><h4>From Structural Biology to Drug Discovery: Chromatography and Mass Spectrometry in Malaria Research</h4><h5>Introduction</h5>In this discussion, Subhoja shares insights into her research journey, focusing on malaria drug discovery and the role of modern analytical techniques in biological and biomedical research. The conversation is aimed primarily at undergraduate students and early-career researchers interested in chemistry, biotechnology, and life sciences.<h5>Research Focus: Malaria Drug Discovery and Kinase Targets</h5>Subhoja is currently involved in malaria drug discovery research at the University of Central Florida, where she has been working since beginning her postdoctoral position two years ago. Her earlier PhD research focused on structure-based drug design in malaria, using a combination of in silico approaches, recombinant protein expression, and X-ray crystallography to determine precise three-dimensional structures of target proteins and their inhibitors.This structural perspective provided a foundation for her current work, which centers on drug discovery through compound screening and repurposing. A recent publication from her laboratory explores the use of repurposed mammalian CDK-like kinase inhibitors as potential antimalarial agents. While such kinase inhibitors are well known in cancer and cardiovascular research, their application to malaria targets represents a novel and promising approach.Kinases are attractive drug targets because of their central role in cell signaling and growth pathways. By targeting specific kinases involved in different stages of the malaria parasite life cycle—whether asexual growth, gametocytogenesis, or differentiation—it may be possible to significantly inhibit parasite growth and progression.<h5>Chromatography in Protein Expression and Purification Workflows</h5>Chromatography plays a critical role throughout Subhoja’s research. Her experience spans from basic chromatography techniques during her early training to advanced protein purification workflows using affinity chromatography, gel filtration (size exclusion chromatography), and ion exchange chromatography.Recombinant proteins are routinely purified using affinity resins such as nickel or cobalt, followed by further purification to remove contaminants. Fast Protein Liquid Chromatography (FPLC) enables compact, stepwise purification workflows suitable for producing proteins for in vitro assays.A recurring challenge in this process is the expression of high-molecular-weight proteins, which often accumulate in insoluble fractions or inclusion bodies. Careful selection of expression vectors, host systems, and induction conditions is therefore essential to maximize yield and solubility.<h5>Integrating Size Exclusion Chromatography into the Workflow</h5>Size exclusion chromatography (SEC) is typically used after affinity purification to further improve protein purity. Following elution with imidazole or glutathione, desalting is required to prevent buffer components from interfering with downstream assays. This is often achieved using desalting columns such as G-25 or PD-10.To remove lower-molecular-weight contaminants, finer SEC media—such as Superdex or Sephacryl columns—are employed. Concentration steps using molecular-weight cut-off filters are then applied to obtain the desired protein concentration for functional studies.These iterative purification and troubleshooting steps are a routine part of protein biochemistry and reflect the importance of methodical optimization and careful validation.<h5>The Role of Mass Spectrometry in Biomolecular Characterization</h5>Mass spectrometry is a key analytical tool in Subhoja’s research pipeline, particularly for target identification and validation. In both malaria and cancer research, MS is used alongside chromatography, immunoprecipitation, and pull-down assays to study protein interactions and molecular recognition events.Affinity-based mass spectrometry enables the identification of binding partners and interactors, whether studying proteins, long non-coding RNAs, or protein complexes. Techniques such as native MS, tandem affinity purification, and proximity labeling (e.g., TurboID-based workflows) provide deeper insights into molecular networks and signaling pathways.These approaches are essential for understanding how candidate drug targets function within complex biological systems.<h5>Sample Preparation Challenges in Biological Research</h5>Sample preparation remains one of the most challenging aspects of biological experimentation. Whole-cell lysates contain proteases, nucleases, and other components that can rapidly degrade target molecules. Preventing degradation requires minimizing preparation time, maintaining low temperatures, and using appropriate inhibitor cocktails.Reproducibility is also critical: biological experiments require multiple replicates, and variability is often unavoidable. Careful handling, protocol optimization, and continuous troubleshooting are essential to ensure reliable results, whether preparing samples for chromatography, mass spectrometry, sequencing, or immunoprecipitation.<h5>Advances in Chromatography and MS for Malaria Research</h5>Modern advances in chromatography and mass spectrometry significantly enhance malaria research by enabling precise target identification, quantification, and functional characterization. Drug discovery workflows begin with construct design and recombinant expression, followed by purification and interaction studies.In malaria research, stage-specific parasite biology requires careful extraction and analysis of proteins from different life cycle stages. Tandem affinity MS, immunoprecipitation, and in vivo validation studies help confirm target relevance and therapeutic potential.Recent work on repurposed kinase inhibitors has shown promising results, including inhibition of hemozoin formation—a key detoxification pathway for the malaria parasite—highlighting the potential of such compounds for further development.<h5>Malaria, Drug Resistance, and Global Impact</h5>Malaria remains a major global health burden, with over 600,000 deaths annually and widespread drug resistance complicating treatment. Artemisinin resistance, particularly associated with mutations in the K13 propeller domain, has driven the search for new targets and therapies.During her PhD, Subhoja focused on falcipain-2, a cysteine protease involved in hemoglobin degradation within the parasite. This pathway is critical for parasite survival and has emerged as a promising drug target. Her work revealed that falcipain-2 operates within a larger protein complex responsible for hemoglobin processing and amino acid release.Understanding these molecular mechanisms is essential for developing robust, stage-specific antimalarial strategies.<h5>Advice for Early-Career Researchers</h5>For researchers just starting out, Subhoja emphasizes the importance of hands-on experience. Working directly with cells, lysates, and analytical tools is essential for truly understanding experimental systems. Failure is an inherent part of research, and perseverance is key.Motivation, teamwork, careful sample handling, and thorough preparation all contribute to long-term success. Reading extensively, critically evaluating one’s own work, and appreciating incremental progress are vital aspects of a sustainable research career.Every successful experiment—no matter how small—represents meaningful progress and contributes to the broader goals of science and medicine.<h5>Closing Remarks</h5>The discussion highlights how interdisciplinary approaches combining chromatography, mass spectrometry, structural biology, and biochemistry are driving advances in malaria drug discovery. Through careful experimental design, analytical rigor, and collaborative teamwork, researchers can address complex biological challenges and contribute to global health solutions.<blockquote>This text has been automatically transcribed from a video presentation using AI technology. It may contain inaccuracies and is not guaranteed to be 100% correct.</blockquote><blockquote><h4>Concentrating on Chromatography Podcast</h4>Dive into the frontiers of chromatography, mass spectrometry, and sample preparation with host David Oliva. Each episode features candid conversations with leading researchers, industry innovators, and passionate scientists who are shaping the future of analytical chemistry. From decoding PFAS detection challenges to exploring the latest in AI-assisted liquid chromatography, this show uncovers practical workflows, sustainability breakthroughs, and the real-world impact of separation science. Whether you’re a chromatographer, lab professional, or researcher you'll discover inspiring content!You can find Concentrating on Chromatography Podcast in podcast apps:<ul><li><a target="_blank" rel="noopener noreferrer" href="https://open.spotify.com/show/1wZg67rCjoGju4yhqxI3tL">Spotify</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://podcasts.apple.com/tz/podcast/concentrating-on-chromatography/id1788429185">Apple podcast</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://podscan.fm/podcasts/concentrating-on-chromatography">podscan</a></li></ul>and on <a target="_blank" rel="noopener noreferrer" href="https://www.youtube.com/@ChromatographyTalk/videos">YouTube channel</a></blockquote>

Affinity, Gel Filtration, Size Exclusion Chromatography: Repurposing Kinase Inhibitors for Malaria

Article

Product

Video

Scientists

Food

Interview

Science and research

The Institute of Organic Chemistry and Biochemistry of the Czech Academy of Sciences (IOCB Prague) is a leading scientific institution in the Czech Republic, recognized internationally. Its primary mission is basic research in the fields of chemical biology and medicinal chemistry, organic and material oriented chemistry, chemistry of natural compounds, biochemistry and molecular biology, physical chemistry, theoretical chemistry, and analytical chemistry. 

Institute of Organic Chemistry and Biochemistry of the Czech Academy of Sciences

Organomation, founded in 1959, designs and manufactures high-quality nitrogen evaporators and extraction systems. Known for innovation and durability, their lab instruments are used globally for efficient sample preparation with strong customer support.

Organomation

WATREX Prague is the distributor and producer of HPLC techniques in the Czech Republic and Slovakia. Main Chromatografic and Related Techniques Supported: LC, GPC, IC, IEC, Automated SPE, LC Columns and special column packings, LC method development, Software development, Laboratory Robots.

Watrex Praha

ECOM ECP201L Preparative HPLC Pump

Preparative HPLC pump with a flow rate range of up to 1000 ml/min.

<div style="display:block;" aria-labelledby="tab_item-0">The ECP201L Preparative Pump is an innovative, powerful, and cost-effective unit for preparative liquid chromatography where high pressure is needed.&nbsp;The pump with 4 low-pressure valves delivers a flow rate of up to 1000 ml/min at a very&nbsp;high output pressure of up to 15 MPa (2176 psi).<h3>Main features and benefits</h3><ul><li>Durability&nbsp;– The pump is constructed for high pressure and flow rates. This makes it suitable for day-to-day long-term use in production</li><li>Wide application possibilities – The unit is used for pharmaceutical separations and plant extract purification, such as cannabinoids, peptides, and oligonucleotides. Also, it has much wider use in other chemical production, such as dosing into chemical reactors, and in various laboratory uses. Another advantage is the usability of the same device for separation method development.</li><li>Smart controls and diagnostics&nbsp;– It is easy to operate, especially with ECOMAC and Clarity software. This makes unit management powerful and convenient. The basic version of the ECOMAC software is available free of charge. It is also used for service and diagnostics.</li><li>Other useful features<ul style="list-style-type:circle;"><li>A new learning algorithm for pulsation suppression</li><li>A leakage sensor</li><li>A seal wash kit for longer piston seal life</li><li>Also available in configurations made of&nbsp;certified bio-inert materials</li></ul></li></ul><h4>Parameters</h4><ul><li>Flow rate: 1– 1000 ml/min</li><li>Maximum operating pressure: 15 MPa up to 1000 ml/min</li><li>Flow rate setting: 1 ml/min steps</li><li>Repeatability of flow rate adjusting:&nbsp;± 1 %</li><li>Accuracy of flow rate setting:&nbsp;± 2 %</li><li>Wetted materials:&nbsp;stainless steel, PEEK, TefzelTM, PE, ceramic, seals</li><li>Communication:&nbsp;RS232,Ethernet (LAN),USB,Remote digital I/O</li><li>Power supply:&nbsp;100-240V VAC</li><li>Power input: 500 VA</li><li>Dimensions W x H x D:&nbsp;276 x 153 x 620 mm (10.87 x 6.14 x 24.40 in)</li><li>Weight:&nbsp;26 kg (57.32 lb)</li><li>Pressure Compensation Learning:&nbsp;yes&nbsp;</li></ul></div>

ECOM ECP201LG Gradient Preparative Pump 1000 mL/min

An innovative, powerful, and cost-effective unit for preparative LC separations with high pressure. 4 low pressure gradient valves, flow up to 1000 mL/min. 

<div style="display:block;" aria-labelledby="tab_item-0">The ECP201L Preparative Pump is an innovative, powerful, and cost-effective unit for preparative liquid chromatography where high pressure is needed. The pump with 4 low-pressure valves delivers a flow rate of up to 1000 mL/min at a very high output pressure of up to 15 MPa (2176 psi).<h3>Main features and benefits</h3><h4>Durability</h4>The pump is constructed for high pressure and flow rates. This makes it suitable for day-to-day long-term use in production<h4>Wide application possibilities</h4>The unit is used for pharmaceutical separations and plant extract purification, such as cannabinoids, peptides, and oligonucleotides. Also, it has much wider use in other chemical production, such as dosing into chemical reactors, and in various laboratory uses. Another advantage is the usability of the same device for separation method development.<h4>Smart controls and diagnostics</h4>It is easy to operate, especially with ECOMAC and Clarity software. This makes unit management powerful and convenient. The basic version of the ECOMAC software is available free of charge. It is also used for service and diagnostics.<h4>Other useful features</h4><ul><li>A new learning algorithm for pulsation suppression</li><li>A leakage sensor</li><li>A seal wash kit for longer piston seal life</li><li>Also available in configurations made of certified bio-inert materials</li></ul><h3>Parameters</h3><ul><li>Flow rate: 1 – 1000 ml/min</li><li>Maximum operating pressure in the pump: 15 MPa up to 1000 ml/min</li><li>Flow rate setting: 1 ml/min steps</li><li>Repeatability of flow rate adjusting: ± 1 %</li><li>Accuracy of flow rate setting: ± 2 %</li><li>Wetted materials in the pump: stainless steel, PEEK, TefzelTM, Kalrez®, ceramic, seals GFP (PTFE) by default or UHMW-PE on request</li><li>Control: RS232, Ethernet(LAN), USB</li><li>Output capillary outer diameter: 1/8 "</li><li>Input tubing outer diameter: 3/8 ”</li><li>Number of gradient valves*: 4 (A,B,C,D)</li><li>Orifice: 5 mm</li><li>Fluid temperature: 5 - 90°C</li><li>Connecting thread: 5/8" - 18 UNF</li><li>Power supply: 100 - 240 V AC</li><li>Power input: 500 VA</li><li>Weight of the complete set: 30 kg (66.14 lb)</li><li>Dimensions (w x h x d) of the complete set: 340 x 170 x 640 mm (13.4 x 6.7 x 25.2 in)</li></ul></div>

ECOM ECP2200 Preparative Pump

Powerful and durable pumps for preparative applications in low- and high-pressure liquid chromatography, designed with 2 pump heads connected in parallel

<div style="display:block;" aria-labelledby="tab_item-0">This pump works as an isocratic pump and together with a gradient box also as a gradient pump.These powerful and durable pumps are suitable for preparative applications in low- and high-pressure liquid chromatography across the chemical industry. They are designed with 2 pump heads connected in parallel with a piston diameter of 3/8”.&nbsp;Many improvements make these pumps more reliable, including a new learning algorithm for pulsation suppression and a leakage sensor. New material versions have been added-in, beyond to stainless steel A316L, also Hastelloy, titanium and PEEK for biocompatible applications. The pumps can operate in two modes, i.e. using constant pressure or using the newly added option of constant flow rate.&nbsp;<h4>Gradient function:&nbsp;</h4>These pumps work as isocratic pumps, and, together with ECOM gradient boxes, they also work as gradient pumps. Gradient boxes ECB2005, ECB2005PC are equipped with a four-way gradient mixing valve and must be ordered together with the pump. These sophisticated units allow for achieving a precise low-pressure gradient, i.e. gradual changes of solvent composition by mixing up to four liquids at the pump‘s entry. The gradient profile can be defined via a computer or manually using a display and a keypad. Without the use of a gradient box, the pump works as isocratic, with the option of one solvent and the composition of the mobile phase being chosen by the user.Customers can use the pistons‘ back-washing function, after working, for example, with a buffered mobile phase.<h4>Seals:&nbsp;</h4>All pumps are delivered with GFP (PTFE) seals by default. You can order the pumps with UHMW-PE seals, which are considered the optimal recommended choice.<h4>Software support:&nbsp;</h4>The pumps are supported by ECOMAC and <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/999">Clarity software</a>.<h3>Features and Benefits</h3><ul><li>All models include a display and keyboard for manual control</li><li>Precise low-pressure gradient mixing (when connected with a gradient module)</li><li>Very good durability and reliability with proper maintenance</li><li>Extended number of wetted material versions – not only stainless steel but also Hastelloy, titanium and PEEK for biocompatible applications</li><li>Piston back-washing function for work with buffered or aggressive mobile phases</li><li>New learning algorithm for pulsation suppression</li><li>Integrated leakage sensor</li><li>Heating unit for pump heads available</li><li>Custom pump modifications of request</li></ul>This pump is equipped with the Pressure Compensation Learning algorithm. Thanks to this smart adaptive process, the pump regulates the rotation speed of the camshaft and measures its impact on pressure pulsation to minimize the output pulsation as much as possible. The algorithm, due to its adaptive capacity, is applicable for many combinations of pump working conditions (solvents, columns, etc.).<h4>Accessories:</h4>Pump head heating unit, see the accessories. If you would like this function for your pump, add the heating unit.<h4>Parameters:</h4><ul><li>Flow rate: 0.001 – 250 ml/min</li><li>Maximum operating pressure: 30 MPa (4351 psi) up to 100 ml/min; 15 MPa (2176 psi) at 250 ml/min</li><li>Flow rate setting: 0.001 ml/min steps</li><li>Repeatability of flow rate adjusting: ± 1 %</li><li>Accuracy of flow rate setting: ± 2 %</li><li>Communication: RS232,Ethernet (LAN),USB,Remote digital I/O</li><li>Power supply: 100 240V 50/60Hz 250VA</li><li>Dimensions W x H x D: 280 x 135 x 498 mm (11.02 x 5.12 x 18.23 in)</li><li>Weight: 13.5 kg (30 lb)</li><li>Output capillary outer diameter: 1/8”</li><li>Upper pressure limit (MPa): 1– 30 (4351PSI)</li><li>Precision of pressure measurement: ± 2%</li><li>Supported Gradient Box: ECB2005, ECB2005PC</li><li>Pressure Compensation Learning: yes&nbsp;</li></ul></div>

ECP2050 Preparative Pump

Preparative HPLC pump with flow-rate ranges of 0.001 to 50 ml/min. 

<div style="display:block;" aria-labelledby="tab_item-0">This pump works as an isocratic pump and together with a gradient box also as a gradient pump.These powerful and durable pumps are suitable for preparative applications in low- and high-pressure liquid chromatography across the chemical industry. They are designed with 2 pump heads connected in parallel with a piston diameter of 3/8”.Many improvements make these pumps more reliable, including a new learning algorithm for pulsation suppression and a leakage sensor. The pumps can operate in two modes, i.e. using constant pressure or the newly added option of constant flow rate. New material versions have been added-in beyond to stainless steel A316L, also Hastelloy, titanium and PEEK for biocompatible applications.<h4>Gradient function</h4>These pumps work as isocratic pumps, and, together with ECOM gradient boxes, they also work as gradient pumps. Gradient boxes ECB2007, ECB2007PC are equipped with a four-way gradient mixing valve and must be ordered together with the pump. These sophisticated units allow for achieving a precise low-pressure gradient, i.e. gradual changes of solvent composition by mixing up to four liquids at the pump‘s entry. The gradient profile can be defined via a computer or manually using a display and a keypad. Without the use of a gradient box, the pump works as isocratic, with the option of one solvent and the composition of the mobile phase being chosen by the user.Customers can use the pistons‘ back-washing function, after working, for example, with a buffered mobile phase.<h4>Seals</h4>All pumps are delivered with GFP (PTFE) seals by default. You can order the pumps with UHMW-PE seals, which are considered the optimal recommended choice.<h4>Software support</h4>The pumps are supported by ECOMAC and Clarity software.<h3>Main features and benefits</h3><ul><li>All models include a display and keyboard for manual control</li><li>&nbsp;Precise low-pressure gradient mixing (when connected with a gradient module)</li><li>Very good durability and reliability with proper maintenance</li><li>Extended number of wetted material versions – not only stainless steel but also Hastelloy, titanium and PEEK for biocompatible applications</li><li>Piston back-washing function for work with buffered or aggressive mobile phases</li><li>New learning algorithm for pulsation suppression</li><li>Integrated leakage sensor</li><li>Heating unit for pump heads available</li><li>Custom pump modifications of request</li></ul>This pump is equipped with the Pressure Compensation Learning algorithm. Thanks to this smart adaptive process, the pump regulates the rotation speed of the camshaft and measures its impact on pressure pulsation to minimize the output pulsation as much as possible. The algorithm, due to its adaptive capacity, is applicable for many combinations of pump working conditions (solvents, columns, etc.).<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ECOM_ECP_2200_Preparative_Pump_5_b84832f1e8.jpg" alt="ECOM: ECP2050 - Preparative Pump - Pressure Compensation Learning algorithm " srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_ECOM_ECP_2200_Preparative_Pump_5_b84832f1e8.jpg 188w," sizes="100vw" width="700" height="580"><h3>Optional configurations/variants</h3>Pump head heating unit, see the accessories shown below. In case you would like this function for your pump, add also the heating unit to&nbsp;your cart. (Also can be found in the Accessories product category).<h5>PN / Wetted parts of pumping block</h5><ul><li>ACCH000X / Hastelloy</li><li>ACCP000X /<span style="-webkit-text-stroke-width:0px;display:inline !important;float:none;font-style:normal;font-variant-caps:normal;font-variant-ligatures:normal;font-weight:400;letter-spacing:normal;orphans:2;text-align:start;text-decoration-color:initial;text-decoration-style:initial;text-decoration-thickness:initial;text-indent:0px;text-transform:none;white-space:normal;widows:2;word-spacing:0px;"> PEEK</li><li>ACC0000X / Stainless steel</li><li>ACCT000X / Titanium</li></ul><h4>Parameters:</h4><ul><li>Flow rate: 0.001 – 50 ml/min</li><li>Maximum operating pressure: 30 MPa (4351 psi)</li><li>Flow rate setting: 0.1 ml/min steps</li><li>Repeatability of flow rate adjusting: ± 0,5 %</li><li>Accuracy of flow rate setting: ± 2 %</li><li>Wetted materials: Stainless steel or Hastelloy or Titanium or PEEK + PEEK, TefzelTM, PE, ceramics, seals&nbsp;</li><li>Communication: RS232, Ethernet (LAN), USB, Remote digital I/O</li><li>Power supply: 100 240V 50/60Hz 250VA</li><li>Dimensions W x H x D: 280 x 135 x 498 mm (11.02 x 5.12 x 18.23 in)</li><li>Weight: 12 kg (26,5 lb)</li><li>Output capillary outer diameter: 1/16”</li><li>Upper pressure limit (MPa): 0,1 – 30 (4351PSI)</li><li>Precision of pressure measurement: ± 2%</li><li>Supported Gradient Box: ECB2005, ECB2005PC</li><li>Pressure Compensation Learning: yes&nbsp;</li></ul></div>

ECOM ECP2100 Preparative Pump

 Preparative HPLC pump with a flow-rate range up to 100 ml/min. 

<div style="display:block;" aria-labelledby="tab_item-0">Innovated pumps ECP2100 work as isocratic pumps and together with a gradient box also as a gradient pump. These powerful and durable pumps are suitable for preparative applications in low- and high-pressure liquid chromatography across the chemical industry. They are designed with 2 pump heads connected in parallel with a piston diameter of 3/8”.Many improvements make these pumps more reliable, including a new learning algorithm for pulsation suppression and a leakage sensor. New material versions have been added-in, beyond to stainless steel A316L, also Hastelloy, titanium and PEEK for biocompatible applications.The pumps can operate in two modes, i.e. using constant pressure or using the newly added option of constant flow rate. The ECP2100 pump now has an innovated spring-loaded outlet check-valve.<h4>Gradient function</h4>These pumps work as isocratic pumps, and, together with ECOM gradient boxes, they also work as gradient pumps. Gradient boxes ECB2007, ECB2007PC are equipped with a four-way gradient mixing valve and must be ordered together with the pump. These sophisticated units allow for achieving a precise low-pressure gradient, i.e. gradual changes of solvent composition by mixing up to four liquids at the pump‘s entry. The gradient profile can be defined via a computer or manually using a display and a keypad. Without the use of a gradient box, the pump works as isocratic, with the option of one solvent and the composition of the mobile phase being chosen by the user.Customers can use the pistons‘ back-washing function, after working, for example, with a buffered mobile phase.<h4>Seals</h4>All pumps are delivered with GFP (PTFE) seals by default. You can order the pumps with UHMW-PE seals, which are considered the optimal recommended choice.<h4>Software support</h4>The pumps are supported by ECOMAC and Clarity software.<h3>Main features and benefits</h3><ul><li>All models include a display and keyboard for manual control</li><li>Precise low-pressure gradient mixing (when connected with a gradient module)</li><li>Very good durability and reliability with proper maintenance</li><li>Extended number of wetted material versions – not only stainless steel but also Hastelloy, titanium and PEEK for biocompatible applications</li><li>Piston back-washing function for work with buffered or aggressive mobile phases</li><li>New learning algorithm for pulsation suppression</li><li>Integrated leakage sensor</li><li>Heating unit for pump heads available</li><li>Custom pump modifications of request</li></ul>This pump is equipped with the Pressure Compensation Learning algorithm. Thanks to this smart adaptive process, the pump regulates the rotation speed of the camshaft and measures its impact on pressure pulsation to minimize the output pulsation as much as possible. The algorithm, due to its adaptive capacity, is applicable for many combinations of pump working conditions (solvents, columns, etc.).<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ECOM_ECP_2200_Preparative_Pump_5_b84832f1e8.jpg" alt="ECOM: ECP2100 - Preparative Pump - Pressure Compensation Learning algorithm " srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_ECOM_ECP_2200_Preparative_Pump_5_b84832f1e8.jpg 188w," sizes="100vw" width="700" height="580"><h3>Optional configurations/variants</h3>Pump head heating unit, see the accessories shown below. If you would like this function for your pump, add the heating unit to&nbsp;your cart. (Also can be found in the Accessories product category).PN / Wetted parts of pumping block<ul><li>ACCH000X / Hastelloy</li><li>ACCP000X /<span style="-webkit-text-stroke-width:0px;display:inline !important;float:none;font-style:normal;font-variant-caps:normal;font-variant-ligatures:normal;font-weight:400;letter-spacing:normal;orphans:2;text-align:start;text-decoration-color:initial;text-decoration-style:initial;text-decoration-thickness:initial;text-indent:0px;text-transform:none;white-space:normal;widows:2;word-spacing:0px;"> PEEK</li><li>ACC0000X / Stainless steel</li><li>ACCT000X / Titanium</li></ul><h4>Parameters:</h4><ul><li>Flow rate: 0.1 – 100 ml/min</li><li>Maximum operating pressure: 30 MPa (4351 psi)</li><li>Flow rate setting: 0.001 ml/min steps</li><li>Repeatability of flow rate adjusting: ± 0,5 %</li><li>Accuracy of flow rate setting: ± 2 %</li><li>Communication: RS232, Ethernet (LAN), USB, Remote digital I/O</li><li>Power supply: 100 240V 50/60Hz 250VA</li><li>Dimensions W x H x D: 280 x 135 x 498 mm (11.02 x 5.12 x 18.23 in)</li><li>Weight: 12 (26,5 lb)</li><li>Output capillary outer diameter: 1/16”</li><li>Upper pressure limit (MPa): 1– 30 (4351PSI)</li><li>Precision of pressure measurement: ± 2%</li><li>Supported Gradient Box: ECB2005, ECB2005PC</li><li>Display, keypad: yes&nbsp;</li><li>Pressure Compensation Learning: yes</li></ul></div>

ECOM ECP2300 Preparative Pump

<div style="display:block;" aria-labelledby="tab_item-0">Powerful and durable pumps suitable for preparative applications in low- and high-pressure liquid chromatography across the chemical industry. An extended&nbsp;number of wetted material versions – not only stainless steel but also Hastelloy, titanium, and PEEK.&nbsp;ECP2300 are designed with 2 pump heads connected in parallel with a piston diameter of 3/8”.Many improvements make these pumps more reliable, including a new learning algorithm for pulsation suppression and a leakage sensor. The pumps can operate in two modes, i.e. using constant pressure or using the newly added option of constant flow rate.<h4>Gradient function:&nbsp;</h4>These pumps work as isocratic pumps, and, together with ECOM gradient boxes, they also work as gradient pumps. Gradient boxes ECB2005, and ECB2005PC are equipped with a four-way gradient mixing valve and must be ordered together with the pump. These sophisticated units allow for achieving a precise low-pressure gradient, i.e. gradual changes of solvent composition by mixing up to four liquids at the pump‘s entry. The gradient profile can be defined via a computer or manually using a display and a keypad. Without the use of a gradient box, the pump works as isocratic, with the option of one solvent and the composition of the mobile phase being chosen by the user.Customers can use the pistons‘ back-washing function, after working, for example, with a buffered mobile phase.<h4>Seals:&nbsp;</h4>All pumps are delivered with GFP (PTFE) seals by default. You can order the pumps with UHMW-PE seals, which are considered the optimal recommended choice.<h4>Software support:&nbsp;</h4>The pumps are supported by ECOMAC and <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/999">Clarity software</a>.<h3>Features and Benefits</h3><ul><li>All models include a display and keyboard for manual control</li><li>Precise low-pressure gradient mixing (when connected with a gradient module)</li><li>Very good durability and reliability with proper maintenance</li><li>Extended number of wetted material versions – not only stainless steel but also Hastelloy, titanium and PEEK for biocompatible applications</li><li>Piston back-washing function for work with buffered or aggressive mobile phases</li><li>New learning algorithm for pulsation suppression</li><li>Integrated leakage sensor</li><li>Custom pump modifications of request</li></ul>This pump is equipped with the Pressure Compensation Learning algorithm. Thanks to this smart adaptive process, the pump regulates the rotation speed of the camshaft and measures its impact on pressure pulsation to minimize the output pulsation as much as possible. The algorithm, due to its adaptive capacity, is applicable for many combinations of pump working conditions (solvents, columns, etc.).This pump is equipped with the Pressure Compensation Learning algorithm. Thanks to this smart adaptive process, the pump regulates the rotation speed of the camshaft and measures its impact on pressure pulsation to minimize the output pulsation as much as possible. The algorithm, due to its adaptive capacity, is applicable for many combinations of pump working conditions (solvents, columns, etc.).Service videos -Seals replacement and&nbsp;Valve replacement :&nbsp;<a target="_blank" rel="noopener noreferrer" href="https://www.ecomsro.com/support/service-videos">https://www.ecomsro.com/support/service-videos</a><h4>Parameters:</h4><ul><li>Flow rate: 0.001 – 300 ml/min</li><li>Maximum operating pressure: 15 MPa (2176 psi)</li><li>Flow rate setting: 0.001 ml/min steps</li><li>Repeatability of flow rate adjusting: ± 0.5 %</li><li>Accuracy of flow rate setting: ± 2 %</li><li>Communication: RS232,Ethernet (LAN),USB,Remote digital I/O</li><li>Power supply: 100 240V 50/60Hz 200VA</li><li>Dimensions W x H x D: 280 x 135 x 498 mm (11.02 x 5.12 x 18.23 in)</li><li>Weight: 13 kg (28.7 lb)</li><li>Output capillary outer diameter: 1/8”</li><li>Upper pressure limit (MPa): 1– 15 (2176PSI)</li><li>Precision of pressure measurement: ± 2%</li><li>Supported Gradient Box: ECB2005, ECB2005PC</li><li>Pressure Compensation Learning: yes&nbsp;</li></ul></div>

ECOM Separtrix PP03 Preparative Pump

Pulse-less triplex piston pumps designed for preparative chromatography applications, equipped with unique compact three-piston head for smooth flow and easy maintenance.

Separtrix PP03 are pulse-less triplex piston pumps designed for preparative chromatography applications - nevertheless, they can be used everywhere, where high pressure, precise flow without pulsations, and high resistance against corrosion are needed. Pumps are equipped with unique compact three-piston head for smooth flow and easy maintenance without a risk of leakage on connecting parts. Back flushed pistons are covered by a hard and chemically resistant polycrystalic carbon layer. Piston cylinders have low dead volume and samples injected through the pump appear low spreading.Pumps with different flow rate ranges differ only in head type, piston diameters, and tubing diameters. Separtrix PP03 are usually supplied with an asynchronous motor and frequency converter but are also available with a step motor which allows the use of the pump in an extremely broad range of flow rates - both for analytical and preparative applications.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ECOM_ECOM_Separtrix_PP_03_Preparative_Pump_4_6079b99e0f.jpg" alt="ECOM: Separtrix PP03 Preparative Pump" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_ECOM_ECOM_Separtrix_PP_03_Preparative_Pump_4_6079b99e0f.jpg 245w," sizes="100vw" width="1349" height="503">Special configurations of Separtrix PP03 pumps are used for three phases low pressure gradient – in this case is extremely important that these pumps offer a nearly constant flow rate not only on the output but on the input too. Low-pressure gradient units are delivered with three solenoid valves on the plate which can be connected to the pump side. The power supply for valves is installed inside the pump box. 10 linear steps can be programmed.Separtrix PP03 pumps are delivered in configuration for high-pressure binary gradient as well. Two pumps – master and slave types – are working together. The master pump controls the flow rate and gradient composition (10 linear steps), slave pump is delivered without a control display, keyboard(s), and pressure sensor. All Separtrix PP03 pumps are equipped with keyboard(s) and graphic display. There is a possibility to set flow rate, pressure limit, and flow correction. A second keyboard is included for gradient programming in the case of low-pressure gradient pumps and high-pressure gradient master pumps.Separtrix PP 03 can be used in the mode of remote control. Pumps can cooperate with the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/999">Clarity data station (Dataapex)</a>. Flow rate, gradient composition, and pressure limit can be programmed. The control module for PP 03 pumps was successfully tested and agreed upon by Dataapex. PP 03 pumps can be controlled using Ecom software ECOMAC as well.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ECOM_ECOM_Separtrix_PP_03_Preparative_Pump_2_ce1c6f0f8f.jpg" alt="ECOM: Separtrix PP03 Preparative Pump" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_ECOM_ECOM_Separtrix_PP_03_Preparative_Pump_2_ce1c6f0f8f.jpg 245w," sizes="100vw" width="1377" height="832"><h3>Types &amp; Description with technical parameters</h3>SEPARTRIX PP03 A: Piston pulsless pump, three pistons O.D. 10 mm with a diamond layer in one stainless steel head, ceramic ball valves, 620 W AC motor vector frequencyconverter, flow rate 25 ml/min. – 800 ml/min., 260 bar (3500 PSI), pressure measurement and limit, membrane keyboard, graphic displaySEPARTRIX PP03 B: Piston pulsless pump, three pistons O.D. 14 mm with diamond layer in one stainless steel head, ceramic ball valves, 620 W AC motor with vector frequency converter, flow rate 50 ml/min. – 1600 ml/min., 160 bar (2100 PSI), pressure measurement and limit, membrane keyboard, graphic displaySEPARTRIX PP03 A: Piston pulsless pump, three pistons O.D. 10 mm with a diamond layer in one stainless steel head, ceramic ball valves, 620 W AC motor vector frequencyconverter, flow rate 25 ml/min. – 800 ml/min., 260 bar (3500 PSI), pressure measurement and limit, membrane keyboard, graphic displaySEPARTRIX PP03 B: Piston pulsless pump, three pistons O.D. 14 mm with diamond layer in one stainless steel head, ceramic ball valves, 620 W AC motor with vector frequency converter, flow rate 50 ml/min. – 1600 ml/min., 160 bar (2100 PSI), pressure measurement and limit, membrane keyboard, graphic displaySEPARTRIX PP03 C: Piston pulsless pump, three pistons O.D. 20 mm with diamond layer in one stainless steel head, ceramic ball valves, 620 W AC motor with vector frequency converter, flow rate 100 ml/min. – 3200 ml/min., 80 bar (1100 PSI), pressure measurement and limit, membrane keyboard, graphic displaySEPARTRIX PP03 AG: PP03 A pump, flow rate 25 ml/min. – 800 ml/min., max. 260 bar (3500 PSI), three phases low-pressure gradient included, (3 x solenoid valves + connecting armature on own holder + 3 x valve power supply in pump unit), second keyboard for gradient control&nbsp;SEPARTRIX PP03 BG: PP03 B pump, three phases, flow rate 50 ml/min. – 1600 ml/min., max. 150 bar (2100 PSI), low-pressure gradient included (3 x solenoid valves + connecting armature on own holder+3 x valve power supply in pump unit), second keyboard for gradient controlSEPARTRIX PP03 C: Piston pulsless pump, three pistons O.D. 20 mm with diamond layer in one stainless steel head, ceramic ball valves, 620 W AC motor with vector frequency converter, flow rate 100 ml/min. – 3200 ml/min., 80 bar (1100 PSI), pressure measurement and limit, membrane keyboard, graphic displaySEPARTRIX PP03 AG: PP03 A pump, flow rate 25 ml/min. – 800 ml/min., max. 260 bar (3500 PSI), three phases low-pressure gradient included, (3 x solenoid valves + connecting armature on own holder + 3 x valve power supply in pump unit), second keyboard for gradient control&nbsp;SEPARTRIX PP03 BG: PP03 B pump, three phases, flow rate 50 ml/min. – 1600 ml/min., max. 150 bar (2100 PSI), low-pressure gradient included (3 x solenoid valves + connecting armature on own holder+3 x valve power supply in pump unit), second keyboard for gradient controlSEPARTRIX PP03 CG: PP03 C pump, flow rate 100 ml/min. – 3200 ml/min., 80 bar (1000 PSI), three phases low-pressure gradient included, (3 x solenoid valves + connecting armature on own holder+3 x valve power supply in pump unit), second keyboard for gradient controlSEPARTRIX PP03S A: Piston pulsless pump, three pistons O.D 10 mm with diamond layer in one stainless steel head, ceramic ball valves, step motor, flow rate 1 ml/min. – 400 ml/min., 250 bar (3500 PSI), pressure measurement and limitSEPARTRIX PP03S B: Piston pulsless pump, three pistons O.D 14 mm with diamond layer in one stainless steel head, ceramic ball valves, step motor, flow rate 1 ml/min. – 800 ml/min., 150 bar (2100 PSI), pressure measurement and limit, membrane keyboard, graphic displaySEPARTRIX PP03S C: Piston pulsless pump, three pistons O.D 20 mm with diamond layer in one stainless steel head, ceramic ball valves, step motor, flow rate 2 ml/min. – 1600 ml/min., 70 bar (800 PSI), pressure measurement and limit, membrane keyboard, graphic displaySEPARTRIX PP03S AG: PP03S A pump, flow rate 1 ml/min. – 400 ml/min., 250 bar (3500 PSI), three phases low-pressure gradient included, (3 x solenoid valves + connecting armature on own holder+3 x valve power supply in pump unit), second keyboard for gradient controlSEPARTRIX PP03S BG: PP03S B pump, flow rate 1 ml/min. – 800 ml/min., 150 bar (2100 PSI), three phases low-pressure gradient included, (3 x solenoid valves + connecting armature on own holder+3 x valve power supply in pump unit), second keyboard for gradient controlSEPARTRIX PP03S CG: PP03S C pump, flow rate 2 ml/min. – 1600 ml/min., 70 bar (800 PSI), three phases low-pressure gradient included, (3 x solenoid valves + connecting armature on own holder+3 x valve power supply in pump unit), second keyboard for gradient controlSEPARTRIX PP03SM A: PP03S A pump, flow rate 0,5 ml/min. – 400 ml/min., 250 bar (3500 PSI), master pump for binary high-pressure gradient, second keyboard for gradient programming&nbsp;SEPARTRIX PP03SM B: PP03S B pump, flow rate 1 ml/min. – 800 ml/min., 150 bar (2100 PSI), master pump for binary high-pressure gradient, second keyboard for gradient programmingSEPARTRIX PP03SM C: PP03S C pump, flow rate 2 ml/min. – 1600 ml/min., 70 bar (800 PSI), master pump for binary high-pressure gradient, second keyboard for gradient programmingSEPARTRIX PP03SS A: PP03SS A pump, flow rate 0,5 ml/min. – 400 ml/min., 250 bar (3500 PSI), slave pump for binary gradient, no display, no keyboard&nbsp;SEPARTRIX PP03SS B: PP03SS B pump, flow rate 1 ml/min. – 800 ml/min., 150 bar (2100 PSI), slave pump for binary gradient, no display, no keyboardSEPARTRIX PP03SS C: PP03SS C pump, flow rate 2 ml/min. – 1600 ml/min., 70 bar (800 PSI), slave pump for binary gradient, no display, no keyboard

Products from category Preparative HPLC pumps distributed by ECOM spol. s r.o. - page 1

Related content

Affinity, Gel Filtration, Size Exclusion Chromatography: Repurposing Kinase Inhibitors for Malaria

Research from IOCB Prague reveals a previously unknown mechanism of genetic transcription

Food Adulteration and How It Is Revealed by Analytical Chemistry