Pesticides and biocides are widely used in agriculture, building materials, and urban gardening to control pests and protect crops and public health. While much attention has been paid to pesticide residues in food, water, and outdoor environments, far less is known about their presence inside homes, where people spend the majority of their time. A new RECETOX study published in Indoor Environments addresses this gap by examining pesticides detected in house dust and their relevance for human exposure.&nbsp;The study reveals that Czech household dust commonly contains multiple pesticide residues, highlighting the persistence of both historic and current chemical use indoors. Modern pesticides were detected in 93% of homes, with two fungicides (carbendazim and propiconazole) most frequently found, while compounds related to the long‑banned pesticide DDT were present in dust from all homes, and were at higher levels in homes over 40 years old. Homes located closer to agricultural areas showed higher levels of current‑use pesticides in spring, indicating an influence of nearby farming activities. &nbsp;House dust acts as a sink for chemicals transported indoors from outdoor sources as well as from indoor use. Many pesticides can persist in dust for long periods, leading to continuous exposure in indoor spaces. This is particularly important for young children, who have higher exposure to dust from playing on the floor and mouthing toys and objects. The research underscores that indoor environments are not isolated from their surroundings. Understanding what ends up in house dust is a crucial step toward protecting public health and developing more comprehensive approaches to managing chemical risks in everyday life.&nbsp;<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/RECETOX_Vyzkum_pesticidu_v_domacim_prachu_opomijena_cesta_lidske_expozice_a9a089fd2f.jpg" alt="RECETOX: Pesticides in House Dust: An Overlooked Pathway of Human Exposure" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_RECETOX_Vyzkum_pesticidu_v_domacim_prachu_opomijena_cesta_lidske_expozice_a9a089fd2f.jpg 195w," sizes="100vw" width="738" height="591"><blockquote><h4>Original Article</h4><h4><a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S2950362026000214?via%3Dihub">Legacy and current-use pesticides in indoor settled dust and association with building age and seasonality</a></h4>Paula Marcinekova, Ondřej Mikeš, Simona Rozárka Jílková, Petr Šenk, Jakub Martiník, Jan Böhm, Petra Borilova Linhartova, Lenka Andrýsková, Jana Klánová, Lisa MelymukIndoor Environ., 2026, 3, 100169<a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1016/j.indenv.2026.100169">https://doi.org/10.1016/j.indenv.2026.100169</a>&nbsp;<h6>licensed under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/">CC-BY 4.0</a></h6></blockquote><h4>Abstract</h4>Indoor pesticide exposure is increasingly recognized as a significant contributor to pollutant exposure in residential spaces. This study investigates concentrations of legacy organochlorine pesticides (OCPs) and current-use pesticides (CUPs) in settled dust from 116 homes in the Czech Republic, in the context of their seasonal variability, relationships with building characteristics, geospatial factors, and indoor dust bacteriome diversity and composition. CUPs were detected in dust in 93% of homes, with carbendazim (84.5%), propiconazole (49.1%), atrazine (24.1%), and tebuconazole (11.2%) detected most frequently. OCPs were found in all homes. Propiconazole concentrations were significantly higher in homes with adjacent gardens, potentially reflecting its use as a biocide in outdoor building materials. CUP concentrations had clear seasonal trends, with peak levels in spring and summer, corresponding to pesticide application periods, particularly in rural environments. OCP concentrations were substantially higher in houses over 40 years old, indicating the persistence of residues from past indoor uses. While pesticide presence was ubiquitous, exposure estimates for children, under both average and high-exposure scenarios, were well below U.S. EPA reference doses (RfDs) for individual compounds; however, most homes had 3–11 pesticides in dust, raising the possibility of mixture effects. No significant associations, using a Spearman rank correlation matrix, were observed between pesticide concentrations and indoor dust bacteriome diversity and composition. These findings highlight the presence of pesticides in homes, including those in urban areas, driven by both current and historical sources, and reinforce the importance of monitoring to better understand potential exposure pathways.<h4>Instrumentation</h4><h5>1. LC–MS/MS analysis of CUPs</h5><ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?instrumentationItems=27&amp;mainauthorItems=10&amp;search=1290+Series+Gradient">Agilent 1290 Series Gradient HPLC</a></li><li>Columns:<ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1701">Phenomenex Luna C18</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?instrumentationItems=34&amp;mainauthorItems=50&amp;search=SecurityGuard+C18">Phenomenex SecurityGuard C18</a></li></ul></li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=55&amp;search=QTrap+5500%2B">SCIEX QTrap 5500+</a> (triple quadrupole MS, ESI+)</li></ul><h5>2. GC–MS/MS analysis of OCPs</h5><ul><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?instrumentationItems=1&amp;mainauthorItems=10&amp;search=8890A">Agilent 8890A GC</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?instrumentationItems=19&amp;mainauthorItems=7&amp;search=Rxi-5Sil-MS">Restek Rxi-5Sil-MS capillary column</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=10">Agilent 7000D triple quadrupole MS</a></li></ul>

Pesticides in House Dust: An Overlooked Pathway of Human Exposure

This technical note presents a practical troubleshooting strategy for one of the most common issues in liquid chromatography (LC): shifting retention times. The approach is based on a systematic distinction between system-related (physical) and chromatographic (chemical) causes.A key diagnostic parameter used throughout the process is the T₀ (dead time), representing an unretained peak that passes through the column without interaction.<h3>Key Concept: T₀ (Dead Time / Unretained Peak)</h3>T₀ is defined as the retention time of a compound that does not interact with the stationary phase and therefore elutes directly with the mobile phase.<h4>How to Determine T₀</h4>T₀ can be determined experimentally by adding a marker compound to the system:<ul><li>Uracil</li><li>Potassium nitrate</li></ul>These compounds are added to a blank or method and produce a measurable unretained peak used for troubleshooting.<h3>Step 1: Evaluate T₀ Behavior</h3>The first and most important step is to determine whether T₀ is constant or variable.<ul><li>Case A: T₀ is Variable (Shifting) → Indicates a system-related (physical) problem &nbsp;</li><li>Case B: T₀ is Constant → Indicates a chromatographic or chemical problem</li></ul><h3>System-Related Issues (T₀ is Variable)</h3>If T₀ is shifting, the problem is likely related to the LC system hardware or physical parameters. This is especially true when all peaks shift together in the chromatogram.<h3>Possible Causes</h3><ul><li>Incorrect Flow Rate</li><li>Pump Malfunction<ul><li>Inconsistent or unstable flow delivery can cause retention time variability.</li></ul></li><li>Incorrect Column Length<ul><li>Using a column with different dimensions than expected.</li></ul></li><li>Solvent Delivery Issues<ul><li>Empty solvent reservoir (system running dry)</li><li>Blockages or restrictions (e.g., frits, solvent lines)</li></ul></li><li>Tubing or System Volume Changes<ul><li>Changes in tubing configuration</li><li>Differences in system dwell (swell) volume</li></ul></li></ul><h3>Chromatographic / Chemical Issues (T₀ is Constant)</h3>If T₀ remains stable but only specific peaks shift, the issue is likely related to chemistry or column conditions.<h4>Possible Causes</h4><ul><li>Incorrect Stationary Phase<ul><li>Column with same dimensions but different chemistry (e.g., different silica or bonded phase)</li></ul></li><li>Ionizable Analytes Ionizable compounds exist in:<ul><li>Neutral form - More hydrophobic, retained longer on a reversed-phase column</li><li>Ionized form</li></ul>Impact of pH Small pH changes in the mobile phase can significantly affect:<ul><li>Ionization state</li><li>Retention time of specific analytes</li></ul></li><li>Mobile Phase Issues<ul><li>Old solvents</li><li>Evaporation of volatile components</li><li>Changes in composition</li></ul></li><li>4. Temperature Variations<ul><li>Temperature affects analyte–stationary phase interactions</li><li>Even small fluctuations can shift retention times</li></ul></li></ul><h3>Step-by-Step Troubleshooting Workflow</h3><ol><li>Add T₀ Marker<ol><li>Use uracil or potassium nitrate</li></ol></li><li>Monitor T₀<ol><li>Determine whether it is constant or shifting</li></ol></li><li>If T₀ is Variable → Check System<ol><li>Flow rate settings</li><li>Pump performance</li><li>Solvent levels and lines</li><li>Column dimensions</li><li>Tubing and system volume</li></ol></li><li>If T₀ is Constant → Check Chemistry<ol><li>Column phase</li><li>Mobile phase composition and pH</li><li>Solvent quality</li><li>Temperature stability</li><li>Nature of analytes (ionizable vs. non-ionizable)</li></ol></li></ol><h3>Discussion and Practical Insight</h3>This troubleshooting approach simplifies a complex problem by dividing it into two main categories:<ul><li>Physical/system-related</li><li>Chemical/chromatographic</li></ul>The use of T₀ as a diagnostic tool allows rapid identification of the problem origin, reducing unnecessary trial-and-error steps.Particular attention should be paid to ionizable compounds, as they are highly sensitive to pH variations, which can lead to significant and selective retention time shifts.<h3>Conclusion</h3>Retention time shifts in LC can be efficiently diagnosed by evaluating the behavior of the T₀ (unretained peak):<ul><li>Variable T₀ → System issue</li><li>Constant T₀ → Chromatographic/chemical issue</li></ul>By following this structured approach, analysts can quickly narrow down the root cause and implement targeted corrective actions.

Troubleshooting Retention Time Shifts in Liquid Chromatography 

News from LabRulezLCMS Library - Week 18, 2026

Article

Application

Academy

Health

Science and research

Video

RECETOX (Research Centre for Toxic Compounds in the Environment) is an independent department of the Faculty of Science of Masaryk University in Brno, which has been established in 1983. RECETOX is focused on the research and education in cross-cutting area of Environment and Health. It addresses interactions among chemicals, environment, and biological systems, including consequences at local, regional, and global levels.

RECETOX - Centrum pro výzkum toxických látek v prostředí

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Phenomenex is a global technology leader committed to developing novel analytical chemistry solutions that solve the separation and purification challenges of researchers in industrial, government and academic laboratories.

Phenomenex

Thermo Scientific SurePac Bio 550 SEC MDi HPLC Columns

SurePac™ Bio 550 SEC MDi™ column delivers high-resolution, reproducible AAV size-based separations with 3 μm silica, 550 Å pores, and bioinert hardware for optimal recovery and QC reliability.

Experience the future of Size-Exclusion Chromatography (SEC) with SurePac™ Bio 550 SEC MDi™ analytical columns and guards exclusively designed to deliver robust and reproducible performance at high resolution and throughput to accelerate your therapeutics analysis process. The column's groundbreaking MDi™ technology integrates our advanced 3 μm monodisperse silica particle platform with bioinert hardware to ensure superior reliability for best sample recovery. SurePac™ Bio 550 SEC MDi™ column is ideal for AAV gene therapeutics analysis and offers excellent selectivity due to the dedicated smaller particle (3 μm) size combined with wide-pore (550Å) for separating monomeric AAVs from aggregates based on their size differences.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Sure_Pac_Bio_550_SEC_M_Di_HPLC_Columns_3_8391a584e0.jpg" alt="Thermo Scientific: SEM image of 3μm monodisperse silica particles (left) vs. 3 μm polydisperse particles (right)" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Sure_Pac_Bio_550_SEC_M_Di_HPLC_Columns_3_8391a584e0.jpg 245w," sizes="100vw" width="1023" height="508">SurePac Bio 550 SEC MDi columns and guards are based on high-purity, spherical, porous (550 Å), 3 μm monodispersed silica particles that are covalently modified with a proprietary diol hydrophilic layer. This unique design yields shorter diffusion distances and enhanced reproducible mass transfer and narrower peaks. The consistent size of these particles facilitates precise control over media synthesis and column packing, significantly improving column-to-column and lot-to-lot reproducibility. The columns are housed in a hydrophilic bioinert-coated stainless-steel hardware to eliminate secondary interactions, ensuring optimal performance during the initial injection process.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Sure_Pac_Bio_550_SEC_M_Di_HPLC_Columns_043f131056.jpg" alt="Thermo Scientific: SurePac Bio 550 SEC MDi HPLC Columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Sure_Pac_Bio_550_SEC_M_Di_HPLC_Columns_043f131056.jpg 156w," sizes="100vw" width="650" height="650"><ul><li>Ideal for AAV gene therapy characterization and quality control assessment due to selectivity of the dedicated smaller particle (3 μm) combined with wide-pore (550Å) size</li><li>Superior column-to-column and lot-to-lot reproducibility eliminates column variability as a concern in stability and QA/QC testing</li><li>High-efficiency peaks with excellent recovery</li><li>Higher resolution and throughput for fast turnaround time without sacrificing performance</li><li>Bioinert hardware to eliminate analyte adsorption</li></ul><h4>Specifications</h4><ul><li>Max. Pressure: 3500 psi (241 bar)</li><li>Packing Material: Monodisperse Silica Resin</li><li>Flow Rate: 0.6 mL/min</li><li>Temperature: 20°C to 60°C</li><li>Phase: Size Exclusion</li><li>Particle Size: 3 μm</li><li>pH: 2 to 8</li></ul>

Products from category Analytical HPLC columns focused on GPC/SEC distributed by Thermo Fisher Scientific (EMEA) - page 1

Related content

Troubleshooting Retention Time Shifts in Liquid Chromatography

Pesticides in House Dust: An Overlooked Pathway of Human Exposure

News from LabRulezLCMS Library - Week 18, 2026