At MSACL 2025, a Thermo Fisher Scientific–sponsored workshop led by Qin Fu addressed one of the most persistent challenges in proteomics: how to efficiently and reproducibly translate biomarker discoveries into clinically meaningful assays. Drawing on experience spanning academia and industry—including prior work in Jennifer Van Eyk’s lab—Fu shared practical insights into building a scalable, end-to-end biomarker discovery-to-validation pipeline.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Fisher_Scientific_Accelerating_Biomarker_Discovery_and_Validation_From_Discovery_to_Clinical_Utility_9558364cf2.jpg" alt="Thermo Fisher Scientific: Accelerating Biomarker Discovery and Validation: From Discovery to Clinical Utility" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Fisher_Scientific_Accelerating_Biomarker_Discovery_and_Validation_From_Discovery_to_Clinical_Utility_9558364cf2.jpg 245w," sizes="100vw" width="1024" height="512">The session highlighted how emerging mass spectrometry technologies, automation, and informatics are reshaping biomarker research—reducing complexity, improving reproducibility, and accelerating the path to clinical utility.<h3>The three tiers of biomarker assays</h3>The workshop opened with a review of the widely accepted three-tier framework that guides biomarker development from early discovery through clinical validation:<h4>Tier 3 – discovery</h4>Exploratory, untargeted workflows such as data-dependent acquisition (DDA) and data-independent acquisition (DIA). These approaches prioritize breadth, enabling the identification of large-magnitude biological changes across hundreds to thousands of analytes, typically with low-to-moderate precision and without internal standards.<h4>Tier 2 – verification</h4>Research-grade targeted assays, including parallel reaction monitoring (PRM) and multiple reaction monitoring (MRM). These methods focus on tens to hundreds of analytes, delivering improved precision and repeatability to confirm trends observed during discovery.<h4>Tier 1 – validation</h4>Clinically validated assays designed to meet rigorous quality and regulatory standards. These workflows incorporate internal standards and strict quality controls to ensure quantitative reproducibility suitable for clinical and translational use.Each tier represents a critical step toward ensuring that biomarker candidates can ultimately deliver reliable patient benefit.<h3>The central challenge: from sample to signal</h3>Reliable biomarker development depends on consistency across the entire analytical workflow—from biological sample preparation to mass spectrometry data acquisition and downstream analysis. Every step introduces potential sources of variability, and minimizing this analytical noise while preserving biological signal is essential.Automation emerged as a central theme of the workshop. Beyond improving throughput, automation fundamentally enhances reproducibility. Robotic sample preparation reduces variability associated with digestion, pipetting, and handling—enabling consistent performance across hundreds or thousands of samples, a scale that is difficult to achieve manually.<h3>Technological innovation powering a paradigm shift</h3>Recent advances in mass spectrometry are enabling researchers to bridge the gap between discovery and validation more efficiently than ever before. The workshop highlighted several Thermo Fisher Scientific platforms driving this shift:<ul><li>Thermo Scientific Orbitrap Astral mass spectrometer Optimized for discovery workflows, the Astral system delivers rapid acquisition and deep proteome coverage while maintaining high precision across large cohorts.</li><li>Thermo Scientific Stellar platform Designed for high-throughput targeted quantification, the Stellar platform supports scalable PRM workflows. Features such as PRM Conductor enable adaptive retention time tracking, which is essential for robust performance in large studies.</li><li>Thermo Scientific OptaSpray Ion Source (under evaluation) A hands-free ionization source designed to deliver consistent spray performance with simplified maintenance, supporting reproducibility across thousands of injections.</li></ul>Together, these technologies create a smoother continuum across assay tiers, shortening timelines and reducing barriers to clinical translation.<h3>Case study: Inflammatory bowel disease (IBD) cohort</h3>A key highlight of the presentation was a large-scale biomarker study in inflammatory bowel disease (IBD). The team conducted a 500-sample discovery analysis, followed by validation in a 1,000-sample cohort. Discovery was performed using the Orbitrap Astral system, while targeted validation employed the Stellar platform.This integrated approach successfully confirmed established biomarkers such as C-reactive protein (CRP) while also identifying novel protein candidates with strong translational potential. Importantly, these markers demonstrated consistency across discovery and validation data sets—underscoring the power of advanced instrumentation combined with robust workflows and informatics.<h3>From high quantity to high quality</h3>Historically, biomarker discovery has involved a tradeoff between throughput and data quality. The workshop demonstrated that this compromise is no longer necessary. By integrating automated sample preparation, optimized informatics, and next-generation mass spectrometry, researchers can now generate high-quality, high-throughput data that is both scalable and reproducible.This shift enables faster discovery while increasing confidence that candidate biomarkers are ready for downstream validation and clinical follow-up.<h3>The future of biomarker translation</h3>The workshop concluded on an optimistic note. Innovations in proteomics are fundamentally transforming biomarker development—shortening timelines, reducing costs, and accelerating the transition from discovery to clinical application.By integrating platforms such as Orbitrap Astral, Stellar, and OptaSpray, Thermo Fisher Scientific is helping advance a new era of translational biomarker science—where precision, scalability, and reliability work together to deliver meaningful clinical impact.Watch the full workshop recording to <a target="_blank" rel="noopener noreferrer" href="https://www.youtube.com/watch?v=ziyffQzZTwk">explore the data, workflows, and results behind this end-to-end approach to biomarker discovery and validation.</a><h3>Intended use disclaimer</h3>General Laboratory Equipment – Not For Diagnostic Procedures. Thermo Scientific general laboratory equipment, consumables, and software are intended for research, academic, and industrial use only. These products are not designed, validated, or approved for in vitro diagnostic or clinical use. Use of these products for diagnostic purposes may result in inaccurate results and potential health and safety risks.<h3>Resources</h3>Workshop &amp; educational content<ul><li>MSACL 2025 workshop recording: <a target="_blank" rel="noopener noreferrer" href="https://www.youtube.com/watch?v=ziyffQzZTwk">Accelerating Biomarker Discovery and Validation</a></li><li>Other MSACL workshop recordings coming soon</li></ul>Thermo Fisher Scientific Product Pages<ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/2207">Thermo Scientific TSQ Certis Mass Spectrometer</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/836">Thermo Scientific Orbitrap Astral Mass Spectrometer</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1149">Thermo Scientific Stellar Mass Spectrometer</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/order/catalog/product/B51004132">Thermo Scientific OptaSpray Ion Source</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/content/lifetech/global/en/home/industrial/mass-spectrometry/mass-spectrometer-price-affordability-programs.html">Mass spectrometer affordability programs</a> (Refurbished MS, trade-in, financing/ leasing)</li></ul>Peer-Reviewed Literature<ul><li>Baker ES et al. <a target="_blank" rel="noopener noreferrer" href="https://europepmc.org/article/MED/22943415">Mass spectrometry for translational proteomics: progress and clinical implications.</a> Genome Medicine (2012).</li><li>Fu Q et al. <a target="_blank" rel="noopener noreferrer" href="https://academic.oup.com/clinchem/article/62/1/198/5611803">An Empirical Approach to Signature Peptide Choice for Selected Reaction Monitoring.</a> Clinical Chemistry (2016).</li><li>Fu Q et al. <a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1002/mas.21750">Automated proteomic sample preparation: The key component for high throughput and quantitative mass spectrometry analysis.</a> Mass Spectrometry Reviews (2023).</li><li>Fu Q et al. <a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1021/acs.jproteome.7b00623">Highly Reproducible Automated Proteomics Sample Preparation Workflow for Quantitative Mass Spectrometry.</a> Journal of Proteome Research (2018).</li><li>Fu Q et al. <a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1002/anie.202409446">A Proteomics Pipeline for Generating Clinical Grade Biomarker Candidates from DIA-MS Discovery.</a> Angewandte Chemie International Edition (2024).</li><li>Fu Q et al. <a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1002/anie.202507610">Development and Clinical Evaluation of a Multiplexed Health Surveillance Panel Using Ultra High-Throughput PRM-MS in an Inflammatory Bowel Disease Cohort.</a> Angewandte Chemie International Edition (2025).</li></ul><blockquote>Visit us on&nbsp;<a target="_blank" rel="noopener noreferrer" href="https://www.linkedin.com/showcase/72003132/admin/dashboard/">LinkedIn:</a>&nbsp;#Omics #BiomarkerDiscovery #MassSpectrometry #ClinicalResearch</blockquote>

Accelerating Biomarker Discovery and Validation: From Discovery to Clinical Utility

Choosing the correct membrane for a syringe filter is an important step in achieving dependable and reproducible analytical results. Whether you work with nylon, PTFE, hydrophilic PTFE, or cellulose acetate filters, the membrane material directly influences filtration efficiency, sample integrity, and overall method performance. In this article, we explore why membrane selection matters, review the characteristics of common membrane materials, and provide practical guidance for choosing the best option for your application.<h4>Why Are Syringe Filters Important?</h4>Syringe filters are routinely used to remove particulate matter from samples prior to analysis. Unfiltered samples can introduce contaminants into chromatographic systems, leading to clogged columns, increased system backpressure, reduced instrument lifetime, and compromised analytical performance.Selecting an appropriate membrane is therefore essential for developing a robust and reliable HPLC workflow. An ideal membrane effectively removes particles while preserving the original composition of the sample. Since the membrane comes into direct contact with both the analyte and the sample solvent, compatibility must always be carefully considered.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_syringe_filters_f3eaa1381e.webp" alt="KNAUER: Syringe filters" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_syringe_filters_f3eaa1381e.webp 156w," sizes="100vw" width="720" height="720">Let’s examine the key factors involved in choosing the most suitable membrane.<h4>Step 1: Consider the Nature of Your Sample</h4>The first and most important factor is the chemical composition of the sample and the solvents involved. Different membrane materials offer different chemical resistance and sample interaction characteristics.<h5>Nylon Membranes</h5>Nylon is one of the most commonly used membrane materials in HPLC laboratories because of its broad compatibility with aqueous solutions and many organic solvents.Recommended applications:<ul><li>Routine filtration of HPLC samples containing aqueous solvents, organic solvents, or mixed mobile phases.</li><li>Removal of suspended particles prior to chromatographic injection.</li><li>General-purpose laboratory filtration where versatility is required.</li></ul>Avoid using Nylon when:<ul><li>Working with strongly acidic solutions or samples with pH values below 3.</li><li>Filtering protein-containing samples, since proteins can adsorb to the membrane surface and reduce recovery.</li></ul><h5>Cellulose Acetate (CA) Membranes</h5>Cellulose acetate membranes exhibit very low protein binding and are widely used for biological and biochemical applications.Recommended applications:<ul><li>Filtration of biological fluids such as serum, plasma, and cell culture media.</li><li>Applications where protein recovery must be maximized.</li><li>Aqueous laboratory procedures involving enzymes or other sensitive biomolecules.</li></ul>Avoid using CA when:<ul><li>Filtering samples containing organic solvents that may damage the membrane.</li><li>Working under highly acidic or highly alkaline conditions that could degrade the material.</li></ul><h5>Hydrophilic PTFE (hPTFE) Membranes</h5>Hydrophilic PTFE combines the exceptional chemical resistance of PTFE with the ability to process aqueous samples without pre-wetting.Recommended applications:<ul><li>Filtration of both aqueous and organic solutions.</li><li>HPLC sample preparation involving mixed solvent systems.</li><li>Applications requiring compatibility across a broad pH range.</li></ul>Avoid using hPTFE when:<ul><li>Processing highly viscous samples that may rapidly clog the membrane.</li><li>Performing PFAS analysis, where fluorinated materials may introduce unwanted contamination.</li></ul><h5>PTFE Membranes</h5>PTFE membranes provide excellent resistance to aggressive chemicals and are especially suitable for demanding solvent environments.Recommended applications:<ul><li>Samples containing strong acids, strong bases, or aggressive organic solvents.</li><li>Environmental, industrial, and chemical analyses involving non-polar solvents such as hexane, toluene, or acetone.</li><li>Filtration of predominantly organic solvent-based samples.</li></ul>Avoid using PTFE when:<ul><li>Filtering aqueous solutions without first wetting the membrane or using a hydrophilic PTFE alternative.</li><li>Working with protein-rich or highly hydrophilic samples where adsorption or poor wetting may occur.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Fig_1_4_Nylon_top_left_CA_top_right_h_PTFE_bottom_left_and_PTFE_bottom_right_86a6481d0b.jpg" alt="KNAUER: Fig. 1–4 Nylon (top left), CA (top, right), hPTFE (bottom, left), and PTFE (bottom, right)" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Fig_1_4_Nylon_top_left_CA_top_right_h_PTFE_bottom_left_and_PTFE_bottom_right_86a6481d0b.jpg 157w," sizes="100vw" width="1111" height="1107"><h4>Step 2: Select an Appropriate Pore Size</h4>The membrane pore size determines the level of particulate removal and should be selected according to the requirements of the analytical method.Common pore sizes include:<ul><li>0.2 µm – Suitable for removing very fine particles and for sterile filtration. Frequently used in UHPLC and LC-MS workflows.</li><li>0.45 µm – The standard choice for most routine HPLC applications.</li><li>1.0 µm and larger – Often used for coarse filtration or as a pre-filtration step for heavily contaminated samples.</li></ul>Choosing the correct pore size helps protect instrumentation while minimizing unnecessary sample loss.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Fig_1_2_0_22_m_left_and_0_45_m_right_Nylon_Syringe_Filter_48ffc3d777.jpg" alt="KNAUER: Fig. 1–2 0.22 µm (left), and 0.45 µm (right) Nylon Syringe Filter" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Fig_1_2_0_22_m_left_and_0_45_m_right_Nylon_Syringe_Filter_48ffc3d777.jpg 245w," sizes="100vw" width="1177" height="573"><h4>Step 3: Verify Chemical Compatibility</h4>Before selecting a membrane, confirm that it is compatible with both the sample matrix and the solvents present. Incompatible materials may swell, degrade, release extractables, or alter the composition of the sample.Consulting a solvent compatibility chart is highly recommended whenever unfamiliar solvents or mixtures are involved.<h4>Step 4: Match the Membrane to the Application</h4>Different analytical applications often benefit from specific membrane types.<h5>HPLC Analysis</h5><ul><li>Nylon and PTFE membranes are among the most frequently used options due to their broad chemical compatibility and excellent filtration performance.</li></ul><h5>Protein and Biomolecule Analysis</h5><ul><li>CA, PVDF, and PES membranes are generally preferred because they exhibit low protein binding and help preserve sample recovery.</li></ul><h5>Microbiological Testing</h5><ul><li>Mixed cellulose ester (MCE) membranes are commonly employed for microbial monitoring and microbiological quality control procedures.</li></ul>Selecting a membrane tailored to the analytical objective can significantly improve data quality and method reliability.<h4>Step 5: Evaluate Product Quality and Certification</h4>Not all syringe filters are manufactured to the same standards. For critical applications, select products that comply with recognized quality systems and certifications such as ISO standards or CE requirements.This becomes particularly important in regulated industries, where traceability, consistency, and documented performance are essential.<h4>Practical Recommendations for Using Syringe Filters</h4>Following good filtration practices can further improve analytical performance.<ul><li>Pre-Wet Hydrophobic Membranes: Hydrophobic materials such as PTFE often require pre-wetting with a compatible organic solvent before filtering aqueous samples.</li><li>Avoid Excessive Pressure: Applying excessive force may rupture the membrane or cause leakage. Luer-lock syringes are recommended to provide secure connections and controlled pressure.</li><li>Use Filters Only Once: Syringe filters are intended for single-use operation. Reusing filters increases the risk of carryover and cross-contamination.</li><li>Dispose of Filters Properly: Used syringe filters should be discarded according to laboratory safety procedures and local waste disposal regulations.</li></ul><h4>Final Thoughts</h4>Selecting the right syringe filter membrane is a key factor in obtaining accurate, reproducible, and reliable analytical results. By considering sample composition, solvent compatibility, pore size, and application requirements, laboratories can choose filtration solutions that protect instruments, preserve sample integrity, and improve overall analytical performance.A carefully selected membrane may seem like a small detail, but it can have a substantial impact on the quality and robustness of your entire analytical workflow.<blockquote>If you want to optimize your HPLC workflow, check out our brand-new <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/2380">SEPAPURE Syringe Filter</a>.</blockquote>

How to Choose the Right Membrane for Your Syringe Filter

News from LabRulezLCMS Library - Week 26, 2026

Article

Product

Application

Science and research

Video

Poster

A unique company dedicated to serving science helping our customers drive productivity and accelerate results. Through our premier brands – Thermo Scientific, Applied Biosystems, Invitrogen, Fisher Scientific and Unity Lab Services.

Thermo Fisher Scientific

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Based in Berlin, KNAUER is a medium-sized, owner-managed company that has been serving the sciences since 1962. We develop and manufacture scientific instruments of superior quality for liquid chromatography, including: Analytical HPLC/UHPLC, Preparative HPLC, Fast protein liquid chromatography (FPLC), Multi-column chromatography/Simulated moving bed (SMB) chromatography. High pressure dosing, in-line detection systems, and osmometry are additional business areas.

KNAUER

Watrex Streamline™ P1 HPLC Pump, Stainless Steel

The Watrex Streamline™ P1 pump is a versatile and powerful dual-piston HPLC pump.

Streamline P1 pump, stainless steel fully meets the demanding requirements for HPLC pumps and can be combined seamlessly with HPLC detectors and instruments from other manufacturers.<blockquote>Price 4 935 € ex VAT</blockquote>In the analytical version of the pump, the flow rate range from 0.001 ml/min to 10 ml/min is adjustable in 1 ul increments with a maximum working pressure of 42 MPa (6,000 psi). Flow rate adjustment accuracy is ±1% and flow rate variation is better than ±0.1%. The pump’s extremely smooth flow profile is ensured by an efficient pulse damper and optimized cam shape.A unique feature is the active piston and seal rinse, which prevents crystallization of buffers. A touch screen display on the front panel allows intuitive control of the pump.The display shows the flow rate, the current pressure and the pump is equipped with pressure limits. A PRIME function is also directly available for flushing at increased flow rates.<figure class="image"><img style="aspect-ratio:611/408;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Streamline_P1_Pump_Stainless_Steel_23a7bf9f11.jpg" alt="Watrex: Streamline™ P1 Pump, Stainless Steel." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Watrex_Streamline_P1_Pump_Stainless_Steel_23a7bf9f11.jpg 234w," sizes="100vw" width="611" height="408"></figure><h3>TECHNICAL SPECIFICATION</h3><ul><li>Flow Rates: 0.001 to 10.000 mL/min</li><li>Pressure: 0 to 6,000 psi (42 MPa)</li><li>Flow precision: &gt; 0.2% RSD</li><li>Flow accuracy: ± 1 % @ 1mL/min and 7 MPa,</li><li>Pressure accuracy: ± 2% of full-scale, with 80:20 H2O/IPA @ 7 MPa</li><li>Pulsation: ± 0.5 % @ 1mL/min and 7 MPa</li><li>Remote inputs: USB</li></ul>You can also visit this product on the <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/chromatography/pumps/isocratic-pumps/streamline-p1-pump-stainless-steel/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex website</a>.

Watrex Streamline™ UV1 HPLC detector, Stainless Steel

The Streamline™ UV1 HPLC detector offers an excellent signal-to-noise ratio, making it ideal for demanding applications.

Watrex Streamline™ UV1 programmable UV/VIS detector exhibits excellent signal-to-noise ratio for even the most demanding applications. It is equipped with standard analytical cell. It has a 2-lamp source (deuterium + tungsten), variable wavelength detector configuration suitable for operation between 190 and 800 nm.<blockquote>Price 4 788 € ex VAT</blockquote><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Watrex_Streamline_UV_1_UV_VIS_detector_686c6c9937.jpg" alt="Watrex: Streamline™ UV1 detector, Stainless Steel" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Watrex_Watrex_Streamline_UV_1_UV_VIS_detector_686c6c9937.jpg 245w," sizes="100vw" width="945" height="436"><h3>TECHNICAL SPECIFICATION</h3><ul><li>Light Source: Deuterium Lamp, Tungsten Lamp</li><li>Wavelength Range: 190 – 800 nm</li><li>Baseline Noise: 1 x 10-5 AU (@240 nm, 2 sec. risetime)</li><li>Baseline Drift: better than 3 x 10-4 AU/h</li><li>Wavelenghth Reproducibility: ± 0.1 nm</li><li>Linearity: better than 2.5 AU</li><li>Analog Output: 1x 1 V</li></ul>You can also visit this product on the <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/chromatography/detectors/uv-vis-detectors/streamline-uv1-detector/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex website</a>.

Watrex Streamline™ PDA1 HPLC Detector, Stainless Steel

Photo-diode-array (PDA) HPLC detector with the optimum wavelength can be selected for each analyzed substance.

Watrex Streamline™ PDA1 is a photo-diode-array (PDA) detector for routine analysis and sophisticated research.<blockquote>Price 9 972 € ex VAT</blockquote>The dual lamp design offers a wavelength range of 190 – 720 nm (256 Diodes) with a low baseline noise.The front-accessible flow cell can easily bHPLCe exchanged, as can be the lamps which are accessible through a side panel in the instrument housing.Streamline™ PDA1 features 4-Wavelength channels to measure chromatograms at 4 different wavelengths at the same time. With this feature the optimum wavelength can be selected for each analyzed substance.<figure class="image"><img style="aspect-ratio:945/435;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Watrex_Streamline_PDA_1_Photodiode_array_detector_3784ec588b.jpg" alt="Watrex: Streamline™ PDA1 Detector, Stainless Steel" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Watrex_Watrex_Streamline_PDA_1_Photodiode_array_detector_3784ec588b.jpg 245w," sizes="100vw" width="945" height="435"></figure><h3>TECHNICAL SPECIFICATION</h3><ul><li>Wetted Materials: Stainless Steel/ PEEK*, teflon, Glass (*depending on configuration)</li><li>Light Source: Deuterium Lamp, Tungsten Lamp</li><li>Wavelength Range: 190 – 720 nm</li><li>Number of Diodes: 256</li><li>Baseline Noise: ± 1 x 10-5 AU (@240 nm, 1 sec. risetime)</li><li>Baseline Drift: better than 3 x 10-4 AU/h</li><li>Wavelength Accuracy: 0.5 nm</li><li>Mean Pixel Pitch: 2.2 nm</li><li>Resolution: 7 nm</li><li>Linearity: higher than 2.0 AU</li><li>Data Rate: 1 Hz – 100 Hz</li></ul>You can also visit this product on the <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/chromatography/detectors/uv-vis-detectors/streamline-pda1-detector-256-diodes/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex website</a>.

Watrex Streamline RI1 Refractive index HPLC detector

The Watrex Streamline RI1 Refractive Index Detector is an essential component in high-performance liquid chromatography (HPLC) systems.

Streamline™ RI1 refractive index detector is suitable for detecting compounds with little or no UV activity such as alcohols, sugars, lipids or polymers. This instrument is designed for use in analytical HPLC (high performance liquid chromatography) as well as for GPC (gel permeation chromatography) applications.<h3>FEATURES</h3><ul><li>Advanced temperature control for high sensitivity and reproducibility</li><li>Prime purge valve</li><li>Long-life LED light source</li><li>Pressure resistant flow cell</li></ul><h3>TECHNICAL SPECIFICATION</h3><ul><li>Light Source: Long-life LED</li><li>Refractive index Range: 1.00 - 1.75 RIU</li><li>Baseline Noise: ± 2.5 nRIU</li><li>Baseline Drift: 200 nRIU/h</li><li>Linearity: &gt; 1000 μRIU</li><li>Flow cell pressure resistance: 5 bar</li><li>Flow cell volume: 15 μl</li><li>Time constant: 0.00/0.01/0.02/0.05/0.1/0.2/0.5/1.0/2.0/5.0/10.0 s</li><li>Analog Output: 1x 0-2.5V</li><li>Outputs: Event 1, Start (OUT), Error (OUT), + 5 V, 24 V Valve</li></ul><h3>Ordering information:</h3><h5>PN/Component:</h5><ul><li>SRI101-001 Watrex Streamline™ RI refractive index detector (Price 7 018 € ex VAT)</li></ul>You can also visit this product on the <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/chromatography/detectors/other-hplc-detectors/streamline-ri1-detector/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex website</a>.

Watrex Streamline VD1 Viscosimetric HPLC detector

 Watrex Streamline™ VD1 viscosimetric detector is designed for detailed characterization of polymer compounds in both aqueous and organic solvents.

Streamline™ VD1 viscosimetric detector measures absolute intrinsic viscosity and is ideal as a detector for online monitoring in any GPC system. VD1 enables measurement of absolute molecular size using Wheatstone bridge operating principle.<h3>FEATURES</h3><ul><li>High sensitivity and stability</li><li>Low-noise</li><li>Open protocol digital data format</li><li>Direct dual analog output</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Watrex_Streamline_VD_1_Viscosimetric_detector_Universal_calibration_from_VD_1_data_1_149c741933.jpg" alt="Watrex: Watrex Streamline VD1 Viscosimetric detector - Universal calibration from VD1 data 1"><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Watrex_Streamline_VD_1_Viscosimetric_detector_Universal_calibration_from_VD_1_data_2_a616c498e8.jpg" alt="Watrex: Watrex Streamline VD1 Viscosimetric detector - Universal calibration from VD1 data 2"><h3>TECHNICAL SPECIFICATION</h3><ul><li>Wavelength Range: 190 – 720 nm</li><li>Baseline Noise: ± 1 x 10-5 AU (@240 nm, 2 sec. risetime)</li><li>Baseline Drift: &lt; 3 x 10-4 AU/h</li><li>Wavelength Accuracy: ± 0.5 nm</li><li>Wavelenghth Reproducibility: ± 0.1 nm</li><li>Mean Pixel Pitch: 2.2 nm</li><li>Resolution (λ FWHM): 7 nm</li><li>Linearity: &gt; 2.5 AU</li><li>Wavelength Program: Programmable, 10 steps</li><li>Analog Output (optional): 1x 1 V</li><li>Options: Dual channel configuration, thermostated flow cell</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Watrex_Streamline_VD_1_Viscosimetric_detector_Technical_specification_76756715f6.jpg" alt="Watrex: Watrex Streamline VD1 Viscosimetric detector - Technical specification"><h3>Ordering information:</h3><h5>PN/Component:</h5><ul><li>SVD101-001 Watrex Streamline™ VD1 viscosimetric detector (Price 19 741 € ex VAT)</li></ul>You can also visit this product on the <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/chromatography/detectors/other-hplc-detectors/streamline-vd1-detector/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex website</a>.

Watrex Streamline CT1/CT1i HPLC Column thermostat

Watrex Streamline™ CT1i column thermostat is an ideal tool for maintaining stable separation temperatures.

Watrex Streamline CT1/CT1i column thermostat is an ideal tool to grant stable separation temperature even if laboratory temperature fluctuates during the day. It is also essential instrument in sugar analysis and/or many applications requiring higher column temperature. An optional built-in manual syringe front loaded sample injector increases usage comfort.<h3>FEATURES</h3><ul><li>Excellent temperature stability</li><li>Heating up to 100°C</li><li>Thermal fuse against overheating</li><li>Up to 3 columns with length of 250 mm can be placed in the thermostat</li><li>Color touch panel control</li><li>Possibility of installing manual injection valve</li></ul><h3>TECHNICAL SPECIFICATION</h3><ul><li>Temperature range: 10 °C above ambient temperature to 100 °C</li><li>Temperature accuracy: max. 0,5 % of actual temperature</li><li>Temperature stability: RSD &lt; 0,4 %</li><li>Settability: 0,1 °C</li><li>Internal dimensions: 320 x 50 x 30 mm (L x W x H)</li><li>Compartment material: PTFE coated metal</li><li>Compartment connection: USB</li><li>Control: build-in color touch panel, datasystem</li></ul><h3>Ordering information:</h3><h5>PN/Component:</h5><ul><li>ST101-001 Streamline CT1 Columm Thermostat (Price 1 720 € ex VAT)</li><li>ST101-002 Streamline CT1i Columm Thermostat with manual injector</li></ul>You can also visit this product on the <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/chromatography/column-thermostats/streamline-ct1-columm-thermostat/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex website</a>.

KNAUER LH 8.1 - Modular analytical XYZ Autosampler

KNAUER Liquid Handler offers finally an alternative in the world of robotic autosamplers. In-house design and development for a new level of simplicity and speed.

KNAUER Liquid Handler offers finally an alternative in the world of robotic autosamplers. In-house design and development for a new level of simplicity and speed, namely by:<h4>Performance</h4><ul><li>Highest repeatability of peak area in full loop or sandwich injection mode</li><li>Zero sample loss and high precision via Sandwich injection mode&nbsp;</li><li>Lowest carry over with active Fast wash station that cleans the injection syringe and needle on the in- and outside by delivering an adjustable cleaning solvent flow</li><li>User-friendly control via pre programmed injection parameters in Chromatography Software packages</li></ul><h4>Versatility</h4><ul><li>Modular design and wide selection of accessories</li><li>Flexible injection volumes by a variety of exchangeable injection syringes&nbsp;</li><li>Customizable lengths of the rail from standard &nbsp;557 or 887 mm up to 1200mm to increase the amount of modules</li></ul><h4>High throughput</h4><ul><li>Up to 390 x 1.5 mL vials or 6 well plates per Robotic Cooler</li><li>Maximum 1560 x 1.5 ml vials or 24 well plates per Liquid Handler</li><li>Short cycle times via fast and precise movements and the software option "overlapped injections" that allows for preparing the next injection while the previous is still running</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Knauer_Liquid_Handler_LH_8_1_AZURA_system1_7ad2b43571.jpg" alt="Knauer: Liquid Handler LH 8.1 with AZURA system" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Knauer_Liquid_Handler_LH_8_1_AZURA_system1_7ad2b43571.jpg 244w," sizes="100vw" width="1390" height="889"><h3>Great variety of modules available</h3>KNAUER offers a range of active and passive modules for easy customisation of your LH 8.1.<ul><li>Want to have more samples and need a cooling option? Use the Robotic Cooler!</li><li>Want a lower carry over? Install the Fast Wash Station with two different solvents for in- and outside syringe and needle cleaning!</li><li>Want to change the solvent in your syringe? Use a passive solvent option to draw liquid during the injection process!</li></ul>There are a variety of active and passive options available. Just mount the module on the sampler, configure it in your software and you are ready to go.<h4>Injection Valve</h4>The injection valve consists of a valve drive and a 6 Port 2-Position valve with a special injection port.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Knauer_Liquid_Handler_LH_8_1_standalone1_5f21514cca.jpg" alt="Knauer: Liquid Handler LH 8.1 - standalone" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Knauer_Liquid_Handler_LH_8_1_standalone1_5f21514cca.jpg 179w," sizes="100vw" width="1293" height="1127"><h4>Tray Holder</h4>The manual tray holder can store up to 130 standard HPLC vials and is recommended whenever no sample cooling is needed.<h4>Robotic Cooler</h4>The Robotic Cooler can store your samples at 4 - 40°C. You can insert up to 3 Sample Racks for 130 vials each, what means you can store up to 390 sample vials per Robotic Cooler.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Knauer_Liquid_Handler_LH_8_1_cooled_tray_2_c6fd0672e9.jpg" alt="Knauer: Liquid Handler LH 8.1 - cooled tray" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Knauer_Liquid_Handler_LH_8_1_cooled_tray_2_c6fd0672e9.jpg 239w," sizes="100vw" width="1595" height="1043"><h4>Fast Wash Station</h4>With the fast wash station, the injection syringe is cleaned on the in- and outside. It is always recommended, because it significantly reduces carry-over and offers a very user-friendly handling.&nbsp;<h4>Manual Wash Station</h4>Manual wash stations are an alternative to the fast wash station when carry-over is not the major concern. A manual wash station can be integrated in the manual tray holder with 5 x 10 ml vials or used as an additional module with 6 x 10 ml vials or 2 x 60 ml vials.<h4>Sample Trays</h4>Different sample trays can be used either in the manual rack holder or in the Robotic Cooler. Depending on your needs, they are made for analytical standard 1.5 ml vials or well plates.<h4>Syringes</h4>The most common syringes are implemented in the chromatography software packages. All optimized parameters are preconfigured to get quickly started.<h3>Special features</h3><h4>Injection modes</h4><h5>Sandwich loop: Zero sample loss with excellent reproducibility</h5>Tired of choosing between sample loss and high performance? The new injection mode offers both.<ul><li>KNAUER Liquid Handler LH 8.1 has a special injection mode. Next to standard injections like full loop and partial loop it has the opportunity to use the sandwich injection mode.</li><li>The sample is prepared inside a gastight syringe and then transferred into the HPLC System. In sandwich mode the sample is trapped between small gaps of air. This injection method only takes up the sample volume it needs and the air gaps prevent any peak broadening. Furthermore the pressure increase during the injection process will reduce the sample plug even more leading ot much narrower peak shapes and higher injection precision. &nbsp;</li><li>Ths injection method combines the zero sample loss of µl pickup and injection precision of partial loop injection.</li><li>Only the amount of sample that is injected is aspired by the syringe</li><li>Minimized sample widenening during injection process</li><li>Very high precision</li><li>No loss of sample</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Knauer_Liquid_Handler_LH_8_1_Sandwich_Injection_Mode_Big_fb713e65a0.jpg" alt="Knauer - Liquid Handler LH 8.1 - Sandwich Injection Mode" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Knauer_Liquid_Handler_LH_8_1_Sandwich_Injection_Mode_Big_fb713e65a0.jpg 179w," sizes="100vw" width="2832" height="2475"><h5>Full loop</h5><ul><li>Sample loop is completely filled with the sample</li><li>Maximum reproducibility is achieved</li><li>Injection volume equals the loop volume</li><li>The sample loop will be overfilled to ensure a complete and reproducible filling</li></ul><h5>Partial loop</h5><ul><li>Sample loop is partially filled with programmed amount of sample&nbsp;</li><li>Injection mode is recommended for preparative tasks</li><li>Maximum injection volume equals 50 % of the loop volume</li><li>No sample loss</li></ul><h3>Large number of samples for high-throughput applications</h3>The Robotic Cooler offers space for up to 390 x 1.5 ml standard sample vials while maintaining a stable temperature.&nbsp;<ul><li>The Robotic Cooler compartment offers 6 places for sample racks. Two per drawer with a variety of options. One place can be used by a 60 x 1.5 ml vial rack, or 384 well plates or 96 well plates. Furthermore a double rack can be used to offer 130 x 1.5 mL vial positions, taking the total sample capacity to 390 x 1.5 ml vials.</li><li>Depending on the rail length a multitude of Robotic Coolers can be installed and used seperatly. Up to 4 Robotic Coolers on the longest rail.</li><li>The Robotic Cooler is software controlled, which enables a higher response speed and only open the doors so the injection syringe can reach the sample, to protect other samples from temperature fluctuations.&nbsp;</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Knauer_Liquid_Handler_LH_8_1_cooled_tray_1_d2a6edf265.jpg" alt="Knauer: Liquid Handler LH 8.1 - high throughtput" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Knauer_Liquid_Handler_LH_8_1_cooled_tray_1_d2a6edf265.jpg 245w," sizes="100vw" width="1722" height="1040"><h3>Speed up your injection</h3>The LH 8.1 is optimized to save time during injection and movement.<ul><li>To safe time during the movement, the opening of the Robotic Cooler is software controlled and happens automatically.</li><li>To further speed up the injection, the sampler can apply the "overlapped injections" function, where the sample is already prepared inside the syringe.</li><li>Then the sample can be injected directly after the end of the previous run.&nbsp;</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Knauer_Liquid_Handler_LH_8_1_Method_overlapped_2_e94a888086.jpg" alt="Knauer: Liquid Handler LH 8.1 - Method_overlapped" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Knauer_Liquid_Handler_LH_8_1_Method_overlapped_2_e94a888086.jpg 245w," sizes="100vw" width="1121" height="310"><h3>Easy control via HPLC software&nbsp;</h3><ul><li>The LH 8.1 can be used just as comfortable as any HPLC Autosampler.</li><li>All parameters for recommended syringes, like injection speed, delay and sandwich build-up are already implemented and extensively tested in our Chromatography Software packages, so that you are ready to go!</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Knauer_Liquid_Handler_LH_8_1_Method_overlapped_af91cd2ba5.jpg" alt="Knauer: Liquid Handler LH 8.1 - SW control" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Knauer_Liquid_Handler_LH_8_1_Method_overlapped_af91cd2ba5.jpg 188w," sizes="100vw" width="928" height="771">

ECOM LED20M FIX Dual UV Detector with display

The LED20M FIX Dual UV Detector with a display uses Light Emitting Diodes (LED) as the light source. It is used for flash chromatography.

<div style="display:block;" aria-labelledby="tab_item-0">The LED20M FIX Dual UV Detector with a display uses Light Emitting Diodes (LED) as the light source. It is used for flash chromatography.<h3>Why choose LED20M FIX detectors for your application</h3><ul><li>The LED detectors allow easy and convenient detection in the UV-VIS range. They are manufactured in single or dual channel models with fixed wavelength setup.</li><li>The detectors are widely used in chromatography techniques using gravity glass columns for purification and isolation of organic small molecules and other compounds of interest. Long-lasting and reliable light source is provided by LED.</li><li>The optical flow cell is easily accessible and replaceable, this feature allows flexible choice of detection sensitivity if required. Low cell heating due to low power dissipation of LEDs makes this detector ideal for applications where analytes may be susceptible to degradation due to elevated temperatures. Absorbance information is displayed in detail on the integrated OLED display in numerical and graphical formats.</li><li>The units have convenient USB-C connectivity and power. When the detector is connected to a PC, the recorded data can be stored and processed using the ECOMAC software. ECOMAC basic software license is available with the price of the product without any additional fees. All these features and capabilities allow LED20M FIX to be an affordable, cost-effective, reliable and robust choice of an UV-VIS detector.</li></ul><h4>Wavelengths</h4><ul><li>The dual UV detector version measures at two fixed wavelengths, which are adjusted in production and given by the built-in LEDs.</li><li>By default, diodes with wavelengths of 255 and 280 nm are used. Optionally, the customer can select a wavelength in the range of 255–⁠⁠⁠⁠⁠⁠600 nm in steps of 5 nm.</li></ul><h4>Control</h4><ul><li>The detector can work without any additional SW support, but it is also possible to interconnect it via USB-C cable to a PC with ECOMAC SW, to get a data set for later use or to get reports for unit diagnostics.</li><li>The unit has an innovative PCB board that powers the LEDs, controls the unit, and has many new features, including higher sampling speed.</li></ul><h4>Key features and benefits</h4><ul><li>OLED display</li><li>Numerical and graphical view mode</li><li>Long lifetime of the LED light source</li><li>Low cell heating due to low power losses of the LEDs</li><li>USB C powering and communication port</li><li>ECOMAC Basic software for free</li><li>Autozero function</li><li>Easy flow cell replacement</li><li>Small dimensions</li><li>ECOMAC SW - &nbsp;sophisticated software for data acquisition and for diagnostics</li></ul></div>

ECOM LED20M FIX Single UV Detector with display

The LED20M FIX Single UV Detector with a display uses Light Emitting Diodes (LED) as the light source. It is used for flash chromatography.

<div style="display:block;" aria-labelledby="tab_item-0">The LED20M FIX Single UV Detector with a display uses Light Emitting Diodes (LED) as the light source. It is used for flash chromatography.<h3>Why choose LED20M FIX detectors for your application</h3><ul><li>The LED detectors allow easy and convenient detection in the UV-VIS range. They are manufactured in single or dual channel models with fixed wavelength setup.</li><li>The detectors are widely used in chromatography techniques using gravity glass columns for purification and isolation of organic small molecules and other compounds of interest. Long-lasting and reliable light source is provided by LED.</li><li>The optical flow cell is easily accessible and replaceable, this feature allows flexible choice of detection sensitivity if required. Low cell heating due to low power dissipation of LEDs makes this detector ideal for applications where analytes may be susceptible to degradation due to elevated temperatures. Absorbance information is displayed in detail on the integrated OLED display in numerical and graphical formats.</li><li>The units have convenient USB-C connectivity and power. When the detector is connected to a PC, the recorded data can be stored and processed using the ECOMAC software. ECOMAC basic software license is available with the price of the product without any additional fees. All these features and capabilities allow LED20M FIX to be an affordable, cost-effective, reliable and robust choice of an UV-VIS detector.</li></ul><h3>Wavelengths</h3><ul><li>The single UV detector version measures at 1 fixed wavelength, which is adjusted in production and given by the built-in LEDs.</li><li>By default, diodes with wavelengths of 255 or 280 nm are used. Optionally, customers can select a wavelength within the range of 255–⁠⁠⁠⁠⁠⁠600 nm in steps of 5 nm.</li></ul><h3>Control</h3><ul><li>The detector can work without any additional SW support, but it is also possible to interconnect it via USB-C cable to a PC with ECOMAC SW, to get a data set for later use or to get reports for unit diagnostics.</li><li>The unit has an innovative PCB board that powers the LEDs, controls the unit, and has many new features, including higher sampling speed.</li></ul><h3>Key features and benefits</h3><ul><li>Practical OLED display</li><li>Numerical and graphical view mode</li><li>Long lifetime of the LED light source</li><li>Low cell heating due to low power losses of the LEDs</li><li>USB -C powering and communication port</li><li>Autozero function</li><li>Easy flow cell replacement</li><li>Small dimensions</li><li>ECOMAC SW - &nbsp;sophisticated software for data acquisition and for diagnostics</li></ul>Note: A preparative cell PFC 200 Basic is supplied with the unit. Other flow cells are available at request.</div>

ECOM LED20G Dual UV Detector

LED20G Dual UV detector for preparative and flash chromatography. ECOM's unique patented technology radically improves the detectors´ features. LEDs are used as the source of light.

<div style="display:block;" aria-labelledby="tab_item-0">LED20G Dual UV LED detector for preparative and flash liquid chromatography. LEDs (Light Emitting Diodes) are used as the light source. A unique and patented ECOM technology radically improves the detector characteristics.&nbsp;The LEDs themselves typically have a peak wavelength with a tolerance of +/- 5 nm and a spectral half-width of 10-20 nm, which is unacceptable for some applications, as e.g. for FPLC. This ECOM solution, however, allows the spectral width to be narrowed and, thanks to our patented technology, the exact wavelength to be selected from the LED spectrum.This version of the dual UV detector measures at two fixed wavelengths given by the installed LEDs.The default wavelengths are 254 and 280 nm. Optionally, the customer can select a wavelength in the range 254-600 nm in 1 nm steps.The unit is controlled by an innovative printed circuit board that powers the LEDs, controls the unit, and has many new features including higher sampling speed.<h3>Key features and benefits</h3><ul><li>Sharp, high, and symmetrical peaks thanks to the ECOM patented technology</li><li>Excellent linearity</li><li>Excellent price-performance ratio</li><li>Compact device dimensions</li><li>Low cell heating due to LED low power supply (0.7 W) allows use for peptide analysis or FPLC</li><li>Easy flow cell replacement</li><li>Higher sampling speed</li><li>Sophisticated diagnostic software</li><li>Diodes with wavelengths of 254 and 280 nm and a PFC cell with an optical path length of 2 mm are used as standard.</li><li>Other cells and wavelengths on request.</li></ul><h3>Parameters</h3><ul><li>Number of channels (Signals): Two fix wavelength</li><li>Typical spectral half-width&nbsp;: 4</li><li>Light source: LEDs</li><li>Noise level at test cell (254 nm, TC 0.75 s): ± 10x10-6 AU</li><li>Drift at test cell (254 nm after 1 h): 1x10-3 AU/hr</li><li>Communication: Remote digital I/O</li><li>Power supply: 12-24 V DC</li><li>Power input: 2 W</li><li>Materials in contact with mobile phase: FEP; fused silica, stainless steel (cell)</li><li>Communication interface: USB-C</li><li>Optical cables: no</li><li>Dimensions W x H x D: 193 x 70 x 40 mm (7.60 x 2.76 x 1.57 in)</li><li>Weight: 0.66 kg (1.46 Ibs)</li></ul></div>

Products from category HPLC components focused on HPLC - page 4

Related content

News from LabRulezLCMS Library - Week 26, 2026

How to Choose the Right Membrane for Your Syringe Filter

Accelerating Biomarker Discovery and Validation: From Discovery to Clinical Utility