<p><strong>Size exclusion chromatography (SEC) columns are highly sensitive to operating conditions, including the composition of the mobile phase and the nature of analyzed samples. Improper handling and unsuitable method conditions can significantly reduce column lifetime. This guide summarizes common causes of column degradation and provides practical recommendations for extending column lifespan.</strong></p><h3><span><strong>Common Causes of Reduced Column Lifetime</strong></span></h3><p>Several factors can negatively affect the performance and durability of SEC columns:</p><h4><span><strong>1. Contamination of the Stationary Phase</strong></span></h4><ul><li>Accumulation of impurities from samples or mobile phases</li><li>Microbial growth due to infrequent replacement of mobile phase</li></ul><h4><span><strong>2. Stationary Phase Degradation</strong></span></h4><ul><li>Caused by unsuitable pH conditions</li><li>Exposure to inappropriate temperatures</li><li>Use of harsh chemical agents</li></ul><h4><span><strong>3. Improper Column Storage</strong></span></h4><ul><li>Incorrect storage conditions may reduce column performance over time</li></ul><h4><span><strong>4. Column Inlet Blockage</strong></span></h4><ul><li>Particulates from insufficiently prepared samples can clog the column inlet</li></ul><h3><span><strong>Preventive Measures and Best Practices</strong></span></h3><h4><span><strong>1. Preventing Contamination</strong></span></h4><ul><li>Use high-quality solvents</li><li>Prepare buffer solutions daily</li><li>Filter both mobile phases and samples before use</li><li>Perform regular column cleaning</li></ul><p><strong>Important note: </strong>Not all SEC columns can be reverse flushed. For example:</p><ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1534"><strong>Biozen dSEC-2</strong></a> and Yarra SEC-X7 columns <strong>must not be backflushed</strong></li></ul><h4><span><strong>2. Protecting the Stationary Phase</strong></span></h4><ul><li>Operate within recommended pH and temperature limits</li><li>When using strong denaturants (e.g., urea or SDS):<ul><li>Perform immediate and thorough water flushing after use</li></ul></li></ul><h4><span><strong>3. Proper Column Storage</strong></span></h4><p><strong>Before storage </strong>always clean the column thoroughly</p><ul><li><strong>Two storage options:</strong><ul><li><strong>Buffer with bacteriostatic agent</strong> (e.g., sodium azide)</li><li><strong>No buffer:</strong> water with 20% methanol</li></ul></li></ul><p><strong>When introducing methanol:</strong></p><ul><li>Use <strong>low flow rates</strong></li><li>Prevent pressure spikes that could damage the column</li></ul><p><strong>When restarting the column:</strong></p><ul><li>Consider that the column contains 20% methanol</li><li>Adjust flow conditions accordingly</li></ul><h4><span><strong>4. Preventing Column Inlet Clogging</strong></span></h4><p>Use protective components:</p><ul><li><strong>Guard column</strong></li><li><strong>Precolumn</strong></li></ul><p>These act as barriers to prevent contamination of the analytical column.</p><h5><span><strong>Types of Protection:</strong></span></h5><ul><li><strong>Security guard cartridges</strong><ul><li>Minimal added length</li></ul></li><li><strong>Short precolumns</strong><ul><li>Same stationary phase as analytical column</li></ul></li></ul><h5><span><strong>Key Advantage:</strong></span></h5><ul><li>Essential for columns that <strong>cannot be backflushed</strong></li><li>Protects against:<ul><li>Poorly centrifuged samples</li><li>Particulate contamination</li><li>Dirty sample matrices</li></ul></li></ul><h3><span><strong>Conclusion</strong></span></h3><p>Extending the lifetime of SEC columns requires careful attention to:</p><ul><li>Sample preparation</li><li>Mobile phase quality</li><li>Operating conditions</li><li>Storage procedures</li><li>Use of protective accessories</li></ul><p>Implementing these practices helps prevent contamination, degradation, and mechanical damage, ensuring consistent column performance and longer service life.</p>

Extending the Lifetime of Size Exclusion Columns

<h4><strong>Let’s begin with a simple question: what do we actually mean by high throughput?</strong></h4><p><strong>In the laboratory, high throughput usually refers to the ability to analyze tens, hundreds, or even thousands of samples per day, either across a laboratory workflow or on a single analytical system. Achieving this requires more than just a fast method. It depends on reliable instrumentation, automation, sufficient sample capacity, and smart system design that minimizes idle time between runs.</strong></p><p>In this article, we look at the key requirements for high-throughput HPLC analysis and how they are addressed in the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/2371"><strong>HTQC system</strong></a>.</p><h4><strong>Speed</strong></h4><p>High-throughput HPLC workflows typically rely on short methods. This includes both the chromatographic runtime and the cycle time of the injection module.</p><p>With the HTQC system, fast gradient applications up to 1200 bar can be implemented using two integrated UHPLC high-pressure gradient pumps.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Fig_1_2_HPG_pumps_of_HTQC_system_left_P_8_1_L_max_pressure_1240_bar_right_P_6_1_L_max_pressure_1000_bar_4d4873ff2f.jpg" alt="KNAUER: Fig. 1–2  HPG pumps of HTQC system, left: P 8.1L (max. pressure 1240 bar), right: P 6.1L (max. pressure 1000 bar)" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Fig_1_2_HPG_pumps_of_HTQC_system_left_P_8_1_L_max_pressure_1240_bar_right_P_6_1_L_max_pressure_1000_bar_4d4873ff2f.jpg 245w," sizes="100vw" width="1266" height="386"></p><p>We will not discuss the full details of transferring classical HPLC methods to fast, high-resolution UHPLC methods here, but UHPLC implementation can dramatically reduce total analysis time.</p><p>Let’s use a hypothetical example. Imagine Giorgia, a randomly chosen name, working in pharmaceutical quality control in 1998. She must have travelled back in time, because she would have been too young to work in a lab then, but the example still works. With a classical HPLC method, each sample takes approximately 75 minutes, including equilibration, analysis, and backflushing of a 250 × 4.6 mm ID column. This type of method has been common in QC laboratories around the world. During an eight-hour working day, Giorgia can analyze around six samples.</p><p>Now let’s transfer the same method to UHPLC. The improvement is substantial. Analysis time, equilibration time, and backflushing time are all reduced to under six minutes per sample. Giorgia can now process around 90 samples in one working day.</p><p>You may wonder why the HTQC system requires two UHPLC gradient pumps. We will come back to that shortly.</p><p>The next way to increase speed is to reduce injector cycle time. Injection procedures and washing steps can sometimes take a significant amount of time. This is where the LH 8.1 liquid handler becomes important.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Fig_3_KNAUER_LH_8_1_Liquid_Handler_77ab506ca6.webp" alt="KNAUER: Fig. 3  KNAUER LH 8.1 Liquid Handler" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Fig_3_KNAUER_LH_8_1_Liquid_Handler_77ab506ca6.webp 129w," sizes="100vw" width="800" height="971"></p><p>The LH 8.1 supports overlapped injections. This means that the next injection can already be prepared while the current analysis is still running. Necessary cleaning steps of the injection system are still maintained, but idle time is reduced.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Fig_4_Schematic_buildup_of_injections_with_and_without_overlapped_injections_af089ba652.webp" alt="KNAUER: Fig. 4 Schematic buildup of injections with and without overlapped injections" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Fig_4_Schematic_buildup_of_injections_with_and_without_overlapped_injections_af089ba652.webp 245w," sizes="100vw" width="1920" height="452"></p><p>Let’s return to Giorgia. By using overlapped injections in her QC method, she saves about one minute per sample. This increases her capacity to approximately 105 samples per day.</p><h4><strong>Sample Throughput</strong></h4><p>A high-throughput system must also be able to handle and store a sufficient number of samples. Here, the LH 8.1 provides another major advantage. In the long-rail version, it can be equipped with up to three robotic coolers.</p><p>With three coolers, each containing three drawers, the system can hold nine 10 × 13 sample trays. That means a total capacity of 1170 vials. The samples are also temperature controlled.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Fig_5_6_Robotic_Cooler_with_two_10x6_trays_LH_8_1_887_version_with_two_Robotic_Coolers_855b10c2a3.jpg" alt="KNAUER: Fig. 5–6 Robotic Cooler with two 10x6 trays, LH 8.1 (887 version) with two Robotic Coolers" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Fig_5_6_Robotic_Cooler_with_two_10x6_trays_LH_8_1_887_version_with_two_Robotic_Coolers_855b10c2a3.jpg 245w," sizes="100vw" width="1262" height="503"></p><p>Combined with the low eluent consumption typical of UHPLC, this large sample capacity makes it possible to extend operation from an eight-hour workday to 24-hour operation.</p><p>For Giorgia and her QC lab, this changes everything again. The same UHPLC method, including overlapped injections, can now run continuously around the clock. This allows approximately 320 samples to be processed per day.</p><p>Is that enough? Maybe not. As the blog title suggests: we just can’t get enough.</p><h4><strong>Automation</strong></h4><p>In addition to a standard 6-port, 2-position injection valve, the HTQC system includes an additional valve. This special column-switching and backflushing valve enables two columns to be operated alternately within a single UHPLC system.</p><p>While one column is used for analysis, the second column can be backflushed and equilibrated in the reverse flow direction at the same time. This is particularly useful for reducing matrix effects, which are often encountered in QC laboratories when complex sample matrices are analyzed. It also helps reduce overall method runtime.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Fig_7_Exemplary_flow_scheme_of_special_column_switching_valve_d837a71117.webp" alt="KNAUER: Fig. 7 Exemplary flow scheme of special column switching valve" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Fig_7_Exemplary_flow_scheme_of_special_column_switching_valve_d837a71117.webp 127w," sizes="100vw" width="735" height="905"></p><h4><strong>Parallel Processing</strong></h4><p>Remember the earlier question: why does the system use two UHPLC gradient pumps?</p><p>The reason is now clear. The second gradient pump is required to backflush one column while the other column is connected to the analytical flow path through the special switching valve.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Fig_8_Schematic_illustration_of_column_cleaning_equilibration_and_analysis_with_special_backflush_valve_eae2e6f705.webp" alt="KNAUER: Fig. 8 Schematic illustration of column cleaning, equilibration and analysis with special backflush valve" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Fig_8_Schematic_illustration_of_column_cleaning_equilibration_and_analysis_with_special_backflush_valve_eae2e6f705.webp 245w," sizes="100vw" width="1920" height="281"></p><p>Giorgia immediately ordered a second UHPLC pump and the special valve for her QC lab. She now has a complete HTQC system and is very pleased with the result.</p><p>Why? Let’s calculate it one final time. With all automation features in place, Giorgia can clean one column while the other column analyzes a sample. This enables her to process an impressive 600 samples per day.</p><p>Compared with the classical HPLC method she used in 1998, the daily sample throughput has increased from six samples to 600 samples. That is a 100-fold increase.</p><h4><strong>Summary</strong></h4><p>We started with a question, so let’s end with one too: what steps increased the throughput?</p><p>First, the method was scaled down from classical HPLC to a fast UHPLC approach. Then, a second pump and a special column-switching and backflushing valve were added to the UHPLC setup. Together with the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1454"><strong>LH 8.1 liquid handler</strong></a> and its exceptional sample capacity, the HTQC system becomes a flexible and powerful configuration for high-throughput analysis.</p><p>The system can also be coupled to nearly any detector used in HPLC. Because of its ability to operate at very high speed, it is especially well suited for mass spectrometric methods.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Fig_9_Complete_flow_scheme_of_HTQC_system_with_highlighted_system_components_edef36cb42.webp" alt="KNAUER: Fig. 9 Complete flow scheme of HTQC system with highlighted system components" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Fig_9_Complete_flow_scheme_of_HTQC_system_with_highlighted_system_components_edef36cb42.webp 161w," sizes="100vw" width="800" height="775"></p><blockquote><p>For further information on this topic, please contact our authors: <strong>kramer@knauer.net</strong>, <strong>m.myrach@knauer.net</strong></p></blockquote>

Introducing Our System Solution for High Throughput Quality Control – HTQC

News from LabRulezLCMS Library - Week 19, 2026

Article

Product

Application

Academy

Video

Poster

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Phenomenex is a global technology leader committed to developing novel analytical chemistry solutions that solve the separation and purification challenges of researchers in industrial, government and academic laboratories.

Phenomenex

Based in Berlin, KNAUER is a medium-sized, owner-managed company that has been serving the sciences since 1962. We develop and manufacture scientific instruments of superior quality for liquid chromatography, including: Analytical HPLC/UHPLC, Preparative HPLC, Fast protein liquid chromatography (FPLC), Multi-column chromatography/Simulated moving bed (SMB) chromatography. High pressure dosing, in-line detection systems, and osmometry are additional business areas.

KNAUER

Thermo Scientific Syncronis C18 Columns

Achieve repeatable and consistent liquid chromatography (LC) separations using Thermo Scientific™ Syncronis™ C18 columns. 

<p><strong>Achieve repeatable and consistent liquid chromatography (LC) separations using Thermo Scientific™ Syncronis™ C18 columns. Highly pure, high surface area silica and dense stationary phase coverage minimize secondary interactions and ensure robust, high-resolution separations.&nbsp;</strong></p><p>Double end-capping provides extra surface coverage and inertness toward basic compounds. Manufactured and rigorously tested in ISO 9000 facilities, these columns are designed to meet a range of analytical needs including fast method development, quantitative analysis, and quality control.</p><h5><strong>Highly Reproducible Separations</strong></h5><ul><li>Rigorously tested stationary phase bonded to the highest quality silica ensures consistent, predictable LC performance.</li></ul><h5><strong>Excellent Peak Shapes for Enhanced Resolution and Sensitivity</strong></h5><ul><li>Dense surface coverage of silica minimizes secondary interactions and peak tailing</li><li>Double endcapped for extra surface coverage</li></ul><h5><strong>Exceptional Column-to-Column Consistency</strong></h5><ul><li>Manufactured, packed, and tested in ISO-9000-accredited facilities</li><li>Every column individually tested to meet stringent retention, efficiency, and peak symmetry specifications</li><li>Enhanced automated packing process</li></ul><h5><strong>Available in Three Particle Sizes</strong></h5><ul><li>1.7 μm for rapid ultrahigh-performance LC (UHPLC) separations, and 3 μm and 5 μm for more traditional HPLC analysis</li></ul><h4><strong>Specifications</strong></h4><ul><li><strong>Column type:</strong> Reversed Phase</li><li><strong>Endcapped:</strong> yes</li><li><strong>Max. Pressure:</strong> 5800 psi (400 bar)</li><li><strong>Packing Material:</strong> Spherical, Fully Porous, Ultrapure Silica</li><li><strong>Stationary phase:</strong> C18</li><li><strong>USP Type:</strong> L1</li><li><strong>Surface Area:</strong> 320 m<sup>2</sup>/g</li><li><strong>Temperature:</strong> 60°C</li><li><strong>Carbon load: </strong>16%</li><li><strong>Phase:</strong> Reversed Phase</li><li><strong>Pore Size: </strong>100 Å</li><li><strong>pH: </strong>2 to 9</li></ul><h4><strong>Syncronis HPLC and UHPLC Columns</strong></h4><h5><strong>Enter a new world of chromatography</strong></h5><p>When developing a new method, one of the most important goals for the chromatographer is to achieve a consistent, reproducible separation. This makes selecting an HPLC column that offers highly-reproducible results essential to attaining this goal.</p><h5><strong>Features of Syncronis columns</strong></h5><p>Thermo Scientific Syncronis LC columns achieve high levels of consistency and reproducibility through:</p><ul><li>Highly-pure, high-surface-area silica</li><li>Dense bonding and double endcapping</li><li>Stringent manufacturing and testing protocols</li></ul>

Thermo Scientific Syncronis C18 HPLC Columns

Attain repeatable and consistent LC separations for your scale up purification needs with Thermo Scientific™ Syncronis™ C18 reversed phase preparative HPLC columns. 

<p><strong>Attain repeatable and consistent LC separations for your scale up purification needs with Thermo Scientific™ Syncronis™ C18 reversed phase preparative HPLC columns. These preparative HPLC columns have extremely pure, high surface area silica with dense stationary phase coverage to minimize secondary interactions and ensure robust, high-resolution separations. Double endcapping provides additional surface coverage and inertness toward basic compounds. Columns come in a variety of dimensions and an option for XtendedLife hardware which improves column lifetime by maintaining a uniform packed bed.</strong></p><h5><strong>Highly Reproducible Separations</strong></h5><ul><li>Rigorously tested stationary phase bonded to the highest quality silica ensures consistent, predictable LC performance.</li></ul><h5><strong>Enhanced Resolution and Sensitivity</strong></h5><ul><li>Dense surface coverage of silica minimizes secondary interactions and peak tailing.</li><li>Double endcapped for extra surface coverage.<br>C18 (USP L1) selectivity.</li></ul><p><strong>Preparative HPLC Column Hardware Options</strong> - based on column inner diameter (i.d.) and column performance needs.</p><h5><strong>Standard Threaded and Standard Flange Hardware</strong></h5><ul><li>Designed for standard applications, expertly packed and robustly designed to provide versatile products for routine use.</li><li>Standard threaded hardware for column i.d. &lt; 40mm.</li><li>Standard flange hardware for column i.d. ≥ 40mm.</li><li>Standard hardware can be modified on request to be compatible with SFC.</li></ul><h5><strong>XtendedLife Hardware</strong></h5><ul><li>Improves column lifetime by incorporating an internal Dynamic Axial Compression (DAC) system, ensuring the media bed is continuously packed tightly.</li><li>Compatible with SFC and is available in dimensions up to 50mm i.d.</li></ul><p>Preparative Guards are a proven and cost effective way to extend the lifetime of your prep column. Our preparative guard columns require the use of a preparative guard holder.</p><h5><strong>Customer Specific Orders</strong></h5><p>If there is a Thermo Scientific stationary phase you are currently using and would like to obtain in a preparative scale not shown or would like to discuss a specific column dimension, we would be happy to discuss your requirements.<br>Please contact your local sales representative for Customer Specific Orders.<br>Custom built columns are not eligible for returns.</p><h4><strong>Specifications</strong></h4><ul><li><strong>Column type:</strong> Reversed Phase</li><li><strong>Endcapped:</strong> yes</li><li><strong>Max. Pressure:</strong> 4300 psi (295 bar)</li><li><strong>Packing Material:</strong> Spherical, Fully Porous, Ultrapure Silica</li><li><strong>Stationary phase:</strong> C18</li><li><strong>USP Type:</strong> L1</li><li><strong>Surface Area:</strong> 320 m<sup>2</sup>/g</li><li><strong>Temperature:</strong> 60°C</li><li><strong>Carbon load: </strong>16%</li><li><strong>Phase:</strong> Reversed Phase</li><li><strong>Pore Size: </strong>100 Å</li><li><strong>pH: </strong>2 to 9</li></ul><h4><strong>Syncronis HPLC and UHPLC Columns</strong></h4><h5><strong>Enter a new world of chromatography</strong></h5><p>When developing a new method, one of the most important goals for the chromatographer is to achieve a consistent, reproducible separation. This makes selecting an HPLC column that offers highly-reproducible results essential to attaining this goal.</p><h5><strong>Features of Syncronis columns</strong></h5><p>Thermo Scientific Syncronis LC columns achieve high levels of consistency and reproducibility through:</p><ul><li>Highly-pure, high-surface-area silica</li><li>Dense bonding and double endcapping</li><li>Stringent manufacturing and testing protocols</li></ul>

Thermo Scientific Syncronis C8 HPLC Columns

Improve the consistency and reliability of your liquid chromatography (LC) separations using Thermo Scientific™ Syncronis™ C8 LC columns.

<p><strong>Improve the consistency and reliability of your liquid chromatography (LC) separations using Thermo Scientific™ Syncronis™ C8 LC columns. High-purity, high surface area silica and dense stationary phase coverage minimize secondary interactions and deliver reproducible, high-efficiency separations.&nbsp;</strong></p><p>Double end-capping provides extra surface coverage and inertness toward basic compounds. Manufactured and rigorously tested in ISO 9000 facilities, these columns are designed to meet a range of analytical needs including fast method development, quantitative analysis, and quality control where less retention is required than when using a C18 column.</p><h5><strong>Excellent Peak Shapes for Enhanced Resolution and Sensitivity</strong></h5><ul><li>Dense surface coverage of silica minimizes secondary interactions and peak tailing</li><li>Double endcapped for extra surface coverage</li></ul><h5><strong>Exceptional Column-to-Column Consistency</strong></h5><ul><li>Manufactured, packed, and tested in ISO-9000-accredited facilities</li><li>Every column individually tested to meet stringent retention, efficiency, and peak symmetry specifications</li><li>Enhanced automated packing process</li></ul><h5><strong>Lower Hydrophobic Retention</strong></h5><ul><li>Recommended for moderately hydrophobic analytes or for when a less hydrophobic phase provides optimum retention</li></ul><h5><strong>Available in Three Particle Sizes</strong></h5><ul><li>1.7 μm for rapid ultrahigh-performance LC (UHPLC) separations, and 3 μm and 5 μm for more traditional HPLC analysis</li></ul><h4><strong>Specifications</strong></h4><ul><li><strong>Column type:</strong> Reversed Phase</li><li><strong>Endcapped:</strong> yes</li><li><strong>Max. Pressure:</strong> 5800 psi (400 bar)</li><li><strong>Packing Material:</strong> Spherical, Fully Porous, Ultrapure Silica</li><li><strong>Stationary phase:</strong> C8</li><li><strong>USP Type:</strong> L7</li><li><strong>Surface Area:</strong> 320 m<sup>2</sup>/g</li><li><strong>Temperature:</strong> 60°C</li><li><strong>Carbon load: </strong>10%</li><li><strong>Phase:</strong> Reversed Phase</li><li><strong>Pore Size: </strong>100 Å</li><li><strong>pH: </strong>2 to 8</li></ul><h4><strong>Syncronis HPLC and UHPLC Columns</strong></h4><h5><strong>Enter a new world of chromatography</strong></h5><p>When developing a new method, one of the most important goals for the chromatographer is to achieve a consistent, reproducible separation. This makes selecting an HPLC column that offers highly-reproducible results essential to attaining this goal.</p><h5><strong>Features of Syncronis columns</strong></h5><p>Thermo Scientific Syncronis LC columns achieve high levels of consistency and reproducibility through:</p><ul><li>Highly-pure, high-surface-area silica</li><li>Dense bonding and double endcapping</li><li>Stringent manufacturing and testing protocols</li></ul>

Thermo Scientific Syncronis HILIC HPLC Columns

Ensure consistent, predictable separations of polar and hydrophilic analytes with Thermo Scientific™ Syncronis™ HILIC LC Columns. 

<p><strong>Ensure consistent, predictable separations of polar and hydrophilic analytes with Thermo Scientific™ Syncronis™ HILIC LC Columns. Highly pure, high surface area silica and dense stationary phase coverage minimize secondary interactions and deliver reproducible high-resolution separations. The zwitterionic stationary phase results in a neutral, highly polar surface and provides alternative selectivity to C18 columns without ion-pairing or derivatization. The highly organic mobile phases used with Syncronis HILIC phases facilitate efficient desolvation in ESI-MS detection and improved sensitivity.</strong></p><p>Manufactured and rigorously tested in ISO 9000 facilities, these columns are designed to meet a range of analytical needs including fast method development, quantitative analysis and quality control.</p><h5><strong>Highly Reproducible Separations</strong></h5><ul><li>Rigorously tested stationary phase bonded to the highest quality silica ensures consistent, predictable LC performance</li></ul><h5><strong>Excellent Peak Shapes for Enhanced Resolution and Sensitivity</strong></h5><ul><li>Dense surface coverage of silica minimizes secondary interactions and peak tailing</li></ul><h5><strong>Exceptional Column-to-Column Consistency</strong></h5><ul><li>Manufactured, packed, and tested in ISO-9000-accredited facilities</li><li>Every column individually tested to meet stringent retention, efficiency, and peak symmetry specifications</li><li>Enhanced automated packing process</li></ul><h5><strong>Alternative Selectivity</strong></h5><ul><li>Zwitterionic bonded phase enhances retention of polar and hydrophilic analytes</li><li>No need for ion-pair or derivatization</li></ul><h5><strong>Enhanced Sensitivity with MS Detection</strong></h5><ul><li>Highly organic mobile phase facilitates desolvation in ESI-MS</li></ul><h5><strong>Available in Three Particle Sizes</strong></h5><ul><li>1.7μm for rapid ultrahigh-performance LC (UHPLC) separations</li><li>3μm and 5μm for more traditional HPLC analysis</li></ul><h4><strong>Specifications</strong></h4><ul><li><strong>Column type:</strong> HILIC</li><li><strong>Max. Pressure:</strong> 5800 psi (400 bar)</li><li><strong>Packing Material:</strong> Spherical, Fully Porous, Ultrapure Silica</li><li><strong>Stationary phase:</strong> Zwitterionic</li><li><strong>Surface Area:</strong> 320 m<sup>2</sup>/g</li><li><strong>Temperature:</strong> 60°C</li><li><strong>Carbon load: </strong>5%</li><li><strong>Phase:</strong> HILIC</li><li><strong>Pore Size: </strong>100 Å</li><li><strong>pH: </strong>2 to 8</li></ul><h4><strong>Syncronis HPLC and UHPLC Columns</strong></h4><h5><strong>Enter a new world of chromatography</strong></h5><p>When developing a new method, one of the most important goals for the chromatographer is to achieve a consistent, reproducible separation. This makes selecting an HPLC column that offers highly-reproducible results essential to attaining this goal.</p><h5><strong>Features of Syncronis columns</strong></h5><p>Thermo Scientific Syncronis LC columns achieve high levels of consistency and reproducibility through:</p><ul><li>Highly-pure, high-surface-area silica</li><li>Dense bonding and double endcapping</li><li>Stringent manufacturing and testing protocols</li></ul>

Thermo Scientific Syncronis aQ C18 Polar Endcapped HPLC Columns

The polar end-capped C18 phase in Thermo Scientific Syncronis aQ Column provides optimal retention of polar analytes and is fully compatible with 100% aqueous mobile phases. 

<p><strong>Ensure consistent, predictable liquid chromatography (LC) separations of polar analytes using Thermo Scientific™ Syncronis™ aQ Columns. High surface area silica and dense stationary phase coverage minimize secondary interactions and deliver reproducible high-resolution separations. The polar end-capped C18 phase provides optimal retention of polar analytes and is fully compatible with 100% aqueous mobile phases. Manufactured and rigorously tested in ISO 9000 facilities, these columns are designed to meet a range of analytical needs including fast method development, quantitative analysis, and quality control.</strong></p><h5><strong>Highly Reproducible Separations</strong></h5><ul><li>Rigorously tested stationary phase bonded to the highest quality silica ensures consistent, predictable LC performance</li></ul><h5><strong>Excellent Peak Shapes for Enhanced Resolution and Sensitivity</strong></h5><ul><li>Dense surface coverage of silica minimizes secondary interactions and peak tailing</li></ul><h5><strong>Exceptional Column-to-Column Consistency</strong></h5><ul><li>Manufactured, packed, and tested in ISO-9000-accredited facilities</li><li>Every column individually tested to meet stringent retention, efficiency, and peak symmetry specifications</li><li>Enhanced automated packing process</li></ul><h5><strong>Alternative Selectivity</strong></h5><ul><li>Polar end-capped C18 stationary phase enhances retention of polar analytes</li></ul><h5><strong>Compatible with Highly Aqueous Mobile Phases</strong></h5><ul><li>Polar end-capping allows use of 100% aqueous mobile phases without loss of performance or stability</li></ul><h5><strong>Available in Three Particle Sizes</strong></h5><ul><li>1.7μm for rapid ultrahigh-performance LC (UHPLC) separations</li><li>3μm and 5μm for more traditional HPLC analysis</li></ul><h4><strong>Specifications</strong></h4><ul><li><strong>Column type:</strong> Reversed Phase</li><li><strong>Endcapped: </strong>Polar</li><li><strong>Max. Pressure:</strong> 5800 psi (400 bar)</li><li><strong>Packing Material:</strong> Spherical, Fully Porous, Ultrapure Silica</li><li><strong>Stationary phase:</strong> C18</li><li><strong>USP Type:</strong> L1</li><li><strong>Surface Area:</strong> 320 m<sup>2</sup>/g</li><li><strong>Temperature:</strong> 60°C</li><li><strong>Carbon load: </strong>19%</li><li><strong>Phase:</strong> Reversed Phase</li><li><strong>Pore Size: </strong>100 Å</li><li><strong>pH: </strong>2 to 8</li></ul><h4><strong>Syncronis HPLC and UHPLC Columns</strong></h4><h5><strong>Enter a new world of chromatography</strong></h5><p>When developing a new method, one of the most important goals for the chromatographer is to achieve a consistent, reproducible separation. This makes selecting an HPLC column that offers highly-reproducible results essential to attaining this goal.</p><h5><strong>Features of Syncronis columns</strong></h5><p>Thermo Scientific Syncronis LC columns achieve high levels of consistency and reproducibility through:</p><ul><li>Highly-pure, high-surface-area silica</li><li>Dense bonding and double endcapping</li><li>Stringent manufacturing and testing protocols</li></ul>

Thermo Scientific Syncronis Silica HPLC Columns

Optimize the reproducibility of normal phase chromatographic separations using Thermo Scientific™ Syncronis™ Silica LC Columns.

<p><strong>Optimize the reproducibility of normal phase chromatographic separations using Thermo Scientific™ Syncronis™ Silica LC Columns. Highly pure, base-deactivated, high surface area silica media ensure robust, high-resolution separations of nonpolar and moderately polar organic compounds by normal phase chromatography.</strong></p><p>Manufactured and rigorously tested in ISO 9000 facilities, these columns are designed to meet a range of analytical needs including fast method development, quantitative analysis and quality control.</p><h5><strong>Excellent Reproducibility in Normal Phase Chromatography</strong></h5><ul><li>Highest quality silica ensure consistent, predictable LC performance</li><li>Exceptional Column-to-Column Consistency</li><li>Manufactured, packed and tested in ISO-9000-accredited facilities</li><li>Every column individually tested to meet stringent retention, efficiency and peak symmetry specifications</li><li>Enhanced automated packing process</li></ul><h5><strong>Available in Three Particle Sizes</strong></h5><ul><li>1.7μm for rapid ultrahigh-performance LC (UHPLC) separations</li><li>3μm and 5μm for more traditional HPLC analysis</li></ul><h4><strong>Specifications</strong></h4><ul><li><strong>Column type:</strong> Normal Phase</li><li><strong>Max. Pressure:</strong> 5800 psi (400 bar)</li><li><strong>Packing Material:</strong> Spherical, Fully Porous, Ultrapure Silica</li><li><strong>Stationary phase:</strong> Silica</li><li><strong>USP Type:</strong> L3</li><li><strong>Surface Area:</strong> 320 m<sup>2</sup>/g</li><li><strong>Temperature:</strong> 60°C</li><li><strong>Phase:</strong> Normal Phase</li><li><strong>Pore Size: </strong>100 Å</li><li><strong>pH: </strong>2 to 8</li></ul><h4><strong>Syncronis HPLC and UHPLC Columns</strong></h4><h5><strong>Enter a new world of chromatography</strong></h5><p>When developing a new method, one of the most important goals for the chromatographer is to achieve a consistent, reproducible separation. This makes selecting an HPLC column that offers highly-reproducible results essential to attaining this goal.</p><h5><strong>Features of Syncronis columns</strong></h5><p>Thermo Scientific Syncronis LC columns achieve high levels of consistency and reproducibility through:</p><ul><li>Highly-pure, high-surface-area silica</li><li>Dense bonding and double endcapping</li><li>Stringent manufacturing and testing protocols</li></ul>

Thermo Scientific Syncronis Amino HPLC Columns

Improve the consistency and reliability of your liquid chromatography (LC) separations with Thermo Scientific™ Syncronis™ Amino LC Columns.

<p><strong>Improve the consistency and reliability of your liquid chromatography (LC) separations with Thermo Scientific™ Syncronis™ Amino LC Columns. Manufactured and rigorously tested in ISO 9000 facilities, these columns are designed to meet a range of analytical needs including fast method development, quantitative analysis and quality control.</strong></p><p>High surface area silica, dense stationary phase coverage and double end-capping minimize secondary interactions and ensure reproducible high-resolution separations.</p><h5><strong>Highly Reproducible Separations</strong></h5><ul><li>Rigorously tested stationary phase bonded to the highest quality silica ensures consistent, predictable LC performance.</li></ul><h5><strong>Excellent Peak Shapes for Enhanced Resolution and Sensitivity</strong></h5><ul><li>Dense surface coverage of silica minimizes secondary interactions and peak tailing</li><li>Double endcapped for extra surface coverage</li></ul><h5><strong>Exceptional Column-to-Column Consistency</strong></h5><ul><li>Manufactured, packed and tested in ISO-9000-accredited facilities</li><li>Every column individually tested to meet stringent retention, efficiency, and peak symmetry specifications</li><li>Enhanced automated packing process</li></ul><h5><strong>Excellent Performance in Four Modes</strong></h5><ul><li>Aminopropyl phase performs well in reversed phase, normal phase, weak ion exchange and HILIC modes</li></ul><h5><strong>Available in Three Particle Sizes</strong></h5><ul><li>1.7μm for rapid ultrahigh-performance LC (UHPLC) separations</li><li>3μm and 5μm for more traditional HPLC analysis</li></ul><h4><strong>Specifications</strong></h4><ul><li><strong>Column type:</strong> Mixed mode</li><li><strong>Endcapped: </strong>Yes</li><li><strong>Max. Pressure:</strong> 5800 psi (400 bar)</li><li><strong>Packing Material:</strong> Spherical, Fully Porous, Ultrapure Silica</li><li><strong>Stationary phase:</strong> Amino (NH2)</li><li><strong>USP Type:</strong> L8</li><li><strong>Surface Area:</strong> 320 m<sup>2</sup>/g</li><li><strong>Temperature:</strong> 60°C</li><li><strong>Carbon load:</strong> 4%</li><li><strong>Phase:</strong> Reversed Phase, Normal Phase, Ion Exchange, HILIC</li><li><strong>Pore Size: </strong>100 Å</li><li><strong>pH: </strong>2 to 8</li></ul><h4><strong>Syncronis HPLC and UHPLC Columns</strong></h4><h5><strong>Enter a new world of chromatography</strong></h5><p>When developing a new method, one of the most important goals for the chromatographer is to achieve a consistent, reproducible separation. This makes selecting an HPLC column that offers highly-reproducible results essential to attaining this goal.</p><h5><strong>Features of Syncronis columns</strong></h5><p>Thermo Scientific Syncronis LC columns achieve high levels of consistency and reproducibility through:</p><ul><li>Highly-pure, high-surface-area silica</li><li>Dense bonding and double endcapping</li><li>Stringent manufacturing and testing protocols</li></ul>

Thermo Scientific Dionex IonPac AS15 IC Columns

Determine trace-level concentrations of inorganic anions and low-molecular-weight organic acids in high-purity water matrices with the Thermo Scientific Dionex IonPac AS15 Capillary, Analytical & Guard Columns.

<p><strong>Determine trace-level concentrations of inorganic anions and low-molecular-weight organic acids in high-purity water matrices with the Thermo Scientific™ Dionex™ IonPac™ AS15 Capillary, Analytical &amp; Guard Columns. Specifically designed for analysis of trace anions in high-purity water matrices used by the semiconductor and power generation industries, the column delivers high sensitivity and superior resolution of early-eluting anions (e.g., fluoride, glycolate, acetate, and formate). The column is optimized for selective at an operating temperature of 30°C, and it is ideal for use with large-loop injections.</strong></p><h5><strong>Available in Multiple Formats</strong></h5><ul><li>Dionex IonPac AS15-5μm (3x150mm) column for high efficiency, fast analysis (15 min)</li><li>Dionex IonPac AS15-9μm (2x250mm, 4x250mm, and 0.4x250mm) columns for higher-capacity applications</li><li>Dionex IonPac AS15 capillary column (0.4x250mm) delivers the performance of the standard bore version but requires only 1% of the eluent flow rate, which helps reduce operating costs</li></ul><h5><strong>For Best Performance</strong></h5><ul><li>Use the Thermo Scientific™ Dionex™ IonPac™ AC15 Concentrator column for ultratrace (part per trillion) analyses</li><li>Use a Dionex eluent generator for simplified eluent preparation</li><li>Use the Thermo Scientific™ Dionex™ Anion Self-Regenerating Suppressor (ASRS™ 300) or the Thermo Scientific™ Dionex™ Anion Capillary Electrolytic Suppressor (ACES™ 300) with the Dionex IonPac AS15 column for eluent suppression</li></ul><h4><strong>Specifications</strong></h4><ul><li><strong>Anion Exchange Capacity:</strong> 225 μeq</li><li><strong>Crosslinking: </strong>55% DVB</li><li><strong>Column Capacity:</strong> 225 μeq</li><li><strong>Column Chemistry:</strong> Hydroxide</li><li><strong>For Use With (Application):</strong> Anion Exchange</li><li><strong>Ion Exchange Group: </strong>Alkanol Quaternary Ammonium Ion</li><li><strong>Max. Pressure:</strong> 4000 psi (275 bar)</li><li><strong>Solvent Compatibility:</strong> pH 0 to 14, 0 to 100% HPLC Solvents</li><li><strong>Stationary phase:</strong> IonPac AS15</li><li><strong>Format:</strong> Standard Bore</li><li><strong>Packing Material: </strong>Ethylvinylbenzene/Divinylbenzene</li></ul>

Thermo Scientific Dionex IonPac AS16 IC Columns

Measure trace perchlorate and other highly polarizable anions quickly and accurately in a variety of water matrices with the Thermo Scientific Dionex IonPac AS16 IC Columns.

<p><strong>Measure trace perchlorate and other highly polarizable anions quickly and accurately in a variety of water matrices with the Thermo Scientific™ Dionex™ IonPac™ AS16 IC Columns . This column simplifies the determination of polarizable anions, including thiosulfate, iodide, thiocyanate, and perchlorate using an isocratic hydroxide eluent. It is ideally suited for determination of trace perchlorate in drinking water in accordance with U.S. EPA Methods 314.0 and 314.1 (Primary Method).</strong></p><h5><strong>Designed for Simple, Sensitive Analysis</strong></h5><ul><li>Easily measure trace concentrations of perchlorate in drinking water, surface water, and ground water matrices using a large-loop injection</li><li>Separate hydrophobic anions (iodide, thiocyanate, and thiosulfate) in less than 20 min</li><li>Ideal for polyvalent anions, including polyphosphates and polycarboxylates</li><li>Ultralow hydrophobicity allows fast analysis of polarizable anions</li><li>Can be used in the second dimension of the 2D-IC method for the analysis of trace perchlorate (sub ppb) in drinking water</li></ul><h5><strong>Available in Multiple Formats</strong></h5><ul><li>Standard bore (4x250mm) and microbore (2x250mm) formats</li></ul><h4><strong>Specifications</strong></h4><ul><li><strong>Anion Exchange Capacity:</strong> 170 μeq</li><li><strong>Crosslinking: </strong>55% DVB</li><li><strong>Column Capacity:</strong> 170 μeq</li><li><strong>Column Chemistry:</strong> Hydroxide</li><li><strong>For Use With (Application):</strong> Anion Exchange</li><li><strong>Ion Exchange Group: </strong>Alkanol Quaternary Ammonium Ion</li><li><strong>Max. Pressure:</strong> 4000 psi (275 bar)</li><li><strong>Solvent Compatibility:</strong> pH 0 to 14, 0 to 100% HPLC Solvents</li><li><strong>Stationary phase:</strong> IonPac AS16</li><li><strong>Format:</strong> Standard Bore</li><li><strong>Packing Material: </strong>Ethylvinylbenzene/Divinylbenzene</li></ul>

Thermo Scientific Dionex IonPac AS17-C IC Columns

Quickly determine common inorganic anions in high-purity water matrices with the Thermo Scientific Dionex IonPac AS17-C column. 

<p><strong>Quickly determine common inorganic anions in high-purity water matrices with the Thermo Scientific™ Dionex IonPac AS17-C column. This low-capacity column is optimized for fast gradient separation of inorganic anions in simple sample matrices. It is also ideal for fast gradient separation of sulfur species, including sulfite, sulfate, and thiosulfate. The Dionex IonPac AS17C column is the recommended replacement for all Dionex IonPac AS17 column anion applications.</strong></p><h5><strong>Make Gradient Separations as Easy as Isocratic Runs</strong></h5><p>The Dionex IonPac AS17-C column is designed to be used in conjunction with the Dionex Eluent Generator. The Dionex Eluent Generator automatically produces potassium hydroxide eluents from water, making gradient separations as easy as isocratic runs. Using the Dionex Eluent Generator under gradient conditions, common inorganic anions can easily be separated in a variety of sample matrices including high purity water, drinking water, wastewater, process streams, and scrubber solutions.</p><h5><strong>Achieve Superior Chromatographic Performance</strong></h5><ul><li>Fast gradient separation of inorganic anions in high purity water matrices</li><li>Easy suppression of hydroxide eluent to a very low background with the Thermo Scientific™ Dionex™ Anion Self-Regenerating Suppressor (ASRS™ 300) for trace level determinations (including fluoride) even with a large loop injection</li><li>Superior retention and quantification of fluoride, acetate, propionate, and formate</li><li>Meets performance requirements specified in U.S. EPA Method 300.0 (A)</li><li>Operates at ambient or elevated temperatures</li><li>Column selectivity is optimized for operating temperature of 30°C to ensure reproducible results</li><li>Compatible with Reagent-Free™ Ion Chromatography (RFIC™) systems</li><li>Compatible with organic solvents to enhance analyte solubility, modify column selectivity, or for effective column clean-up</li></ul><p><strong>Note:</strong><i> The Thermo Scientific™ Dionex™ IonPac™ AS18 column is the recommended hydroxide-selective column for determination of common anions in diverse sample matrices.</i></p><h4><strong>Specifications</strong></h4><ul><li><strong>Anion Exchange Capacity:</strong> 30 μeq</li><li><strong>Crosslinking: </strong>55% DVB</li><li><strong>Column Capacity:</strong> 30 μeq</li><li><strong>Column Chemistry:</strong> Hydroxide</li><li><strong>For Use With (Application):</strong> Anion Exchange</li><li><strong>Ion Exchange Group: </strong>Alkanol Quaternary Ammonium Ion</li><li><strong>Max. Pressure:</strong> 4000 psi (275 bar)</li><li><strong>Solvent Compatibility:</strong> pH 0 to 14, 0 to 100% HPLC Solvents</li><li><strong>Stationary phase:</strong> IonPac AS17-C</li><li><strong>Format:</strong> Standard Bore</li><li><strong>Packing Material: </strong>Ethylvinylbenzene/Divinylbenzene</li></ul>

Products from Thermo Fisher Scientific - page 6

Related content

News from LabRulezLCMS Library - Week 19, 2026

Introducing Our System Solution for High Throughput Quality Control – HTQC

Extending the Lifetime of Size Exclusion Columns