Marketplace products from LabRulez - page 10
Polymeric Bond Elut Plexa SPE cartridge designed for clean extraction of nonpolar compounds from complex biological matrices with minimized protein and lipid binding.
Reversed-phase SPE cartridge with 500 mg C18 bonded silica sorbent designed for efficient extraction of nonpolar compounds from aqueous and biological samples.
Stainless steel LC capillary with 0.12 mm ID and pre-swaged SI/M4 fittings, designed for reliable fluid connections and low dead volume in Agilent InfinityLab analytical LC systems.
Active solvent modulation valve for 2D-LC workflows rated to 1300 bar, enabling precise fraction transfer and improved multidimensional LC separations.
Agilent FS ion injector (0.6 mm ID, 180 mm) for Agilent mass spectrometers, designed for stable and reproducible ion transfer from the ion source to the analyzer.
The Agilent Bio-compatible Head 100 µL is a replacement component for Agilent LC/HPLC autosamplers designed for precise handling and injection of biological and sensitive samples.
The Agilent Bio-compatible Head 100 µL is a replacement component for Agilent LC/HPLC autosamplers designed for precise handling and injection of biological and sensitive samples.
Agilent Actuator Valve (PN 5067-4106) is a genuine replacement part for selected Agilent analytical instruments. It functions as a valve actuator controlling the valve mechanism and is typically used during service or maintenance.
Agilent Captiva Premium syringe filter with regenerated cellulose (RC) membrane, 25 mm diameter and 0.45 µm pore size. Designed for sample filtration before LC/HPLC analysis with aqueous and organic solvents.
Acetone calibration standard for verification of UV-VIS spectrophotometers according to USP <857>. Designed for stray light testing in the 250–330 nm UV range and supplied in a hermetically sealed cuvette.
