LCMS
More information
WebinarsAbout usContact usTerms of use
LabRulez s.r.o. All rights reserved. Content available under a CC BY-SA 4.0 Attribution-ShareAlike

Impurities test for Amoxicillin (EP-8.0 method)

Applications |  | Thermo Fisher ScientificInstrumentation
HPLC
Industries
Pharma & Biopharma
Manufacturer
Thermo Fisher Scientific

Summary

Significance of the topic

Reliable impurity profiling of amoxicillin is essential to ensure pharmaceutical quality, patient safety and regulatory compliance.

Study Objectives and Overview

This study evaluates the European Pharmacopoeia 8.0 HPLC method for detecting and quantifying major impurities in amoxicillin samples. It compares test solutions with reference standards to confirm method suitability and impurity separation efficiency.

Methodology

  • Sample preparation: two test solutions containing metronidazole and reference mixtures with cefadroxil and amoxicillin.
  • Chromatographic conditions: gradient elution using mobile phases A (acetonitrile and phosphate buffer, pH 5.0) and B (higher acetonitrile content), flow rate 1.0 mL/min, column temperature 25 °C, injection volume 50 µL.
  • Detection: UV at 254 nm, run time 65 minutes.

Used Instrumentation

  • HPLC system: UltiMate 3000 LC
  • Column: Hypersil Gold, 4.6 × 250 mm, 5 µm
  • Detector: UV lamp at 254 nm

Main Results and Discussion

Resolution between amoxicillin and cefadroxil peaks exceeded the USP criterion (NLT 2.0) with an observed value of 10.01. Relative retention times for impurities C and J fell within specified limits, confirming clear separation and reliable identification.

Benefits and Practical Applications

This validated HPLC method offers high specificity and reproducibility for routine QC of amoxicillin products. It enables accurate impurity monitoring critical for batch release and stability studies.

Future Trends and Potential Applications

Advances may include coupling with mass spectrometry for enhanced detection, adopting green solvent strategies to reduce environmental impact, and integrating automated data analysis to streamline workflows.

Conclusion

The European Pharmacopoeia method delivers robust performance for amoxicillin impurity analysis. Its clear separation, sensitivity and compliance with regulatory standards make it a reliable tool for pharmaceutical quality control.

Content was automatically generated from an orignal PDF document using AI and may contain inaccuracies.

Downloadable PDF for viewing
 

Similar PDF

Toggle
Impurities test for Ampicillin Sodium (EP-8.0 method)
Impurities test for Ampicillin Sodium (EP-8.0 method)
|Thermo Fisher Scientific|Applications
Impurities test for Ampicillin Sodium (EP-8.0 method): SAMPLE PREPARATION: Reference solution (a): Dissolve 27.0 mg of Ampicillin in Mobile phase A and dilute to 50ml with mobile phase A. Reference solution (b): Dissolve 2mg of cefradine CRS in mobile phase…
Key words
ampicillin, ampicillincefradine, cefradinerrt, rrtdimer, dimerreference, referencemobile, mobilephase, phasecriteria, criteriaobtained, obtainedparameters, parametersresolution, resolutionsolution, solutionmin, minresults, resultstime
Compendium of HPLC Applications for Traditional Chinese Medicine and Chemical Drugs in China Pharmacopoeia
Compendium of HPLC Applications for Traditional Chinese Medicine and Chemical Drugs in China Pharmacopoeia Compendium of HPLC Applications for Traditional Chinese Medicine and Chemical Drugs in China Pharmacopoeia Preface This compendium is a collection of analysis methods for traditional Chinese…
Key words
mau, mauret, retchromatographic, chromatographicdegasser, degasserusp, uspvacuum, vacuumtest, testsystem, systemsolution, solutionmin, minwavelength, wavelengthcontrol, controlpump, pumpconstituents, constituentsthrough
Impurities test for Hydrochlorothiazide (EP- method)
Impurities test for Hydrochlorothiazide (EP- method)
|Thermo Fisher Scientific|Applications
Impurities test for Hydrochlorothiazide (EP- method): SAMPLE PREPARATION: Reference solution-a: Dissolve 3mg of Impurity-A and 3mg of Hydrochlorothiazide in 5ml of mixture of equal volumes of acetonitrile and methanol if necessary dilute to 20ml with phosphate buffer solution pH 3.2.…
Key words
hydrochlorothiazide, hydrochlorothiazidemobile, mobilephase, phaseusp, uspimpurity, impuritycriteria, criteriareference, referenceobtained, obtainedparameters, parametersresolution, resolutionbetween, betweensolution, solutionmin, minresults, resultstime
Impurities test for Cefradine (EP- method)
Impurities test for Cefradine (EP- method)
|Thermo Fisher Scientific|Applications
Impurities test for Cefradine (EP- method): SAMPLE PREPARATION: Reference solution-a: Dissolve 3.0 mg of Impurity-B in Mobile phase A and dilute to 50 ml with mobile phase A. Reference solution-b: Dissolve 3.0 mg of Cefradine and Cefalexin monohydrate in Mobile…
Key words
cefradine, cefradinereference, referencecefalexin, cefalexinrrt, rrtmobile, mobilesolution, solutionphase, phasesuitability, suitabilityimpurity, impuritycriteria, criteriamix, mixtime, timeobtained, obtainedparameters, parametersretention
Other projects
GCMS
ICPMS
Follow us
More information
WebinarsAbout usContact usTerms of use
LabRulez s.r.o. All rights reserved. Content available under a CC BY-SA 4.0 Attribution-ShareAlike