Scientists at IOCB Prague are uncovering new details of gene transcription. They have identified a previously unknown molecular mechanism by which the transcription of genetic information from deoxyribonucleic acid (DNA) into ribonucleic acid (RNA) can be initiated. The researchers focused on a specific class of molecules known as alarmones, which are found in cells across a wide range of organisms and whose levels often increase under conditions of cellular stress. The results were published in the prestigious scientific journal Nature Chemical Biology.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/UOCHB_Vyzkum_z_UOCHB_odhaluje_dosud_nepoznany_zpusob_prepisu_geneticke_informace_bc2bfffa6c.jpg" alt="IOCB Prague/Tomáš Belloň: Research from IOCB Prague reveals a previously unknown mechanism of genetic transcription: Dr. Hana Cahová, head of the Chemical Biology of Nucleic Acids research group." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_UOCHB_Vyzkum_z_UOCHB_odhaluje_dosud_nepoznany_zpusob_prepisu_geneticke_informace_bc2bfffa6c.jpg 234w," sizes="100vw" width="2000" height="1335"><div>Molecules of ribonucleic acid can carry a variety of chemical modifications at one end, known as caps. In eukaryotic organisms, including human cells, the best-known cap plays an important role in RNA stability and in regulating its subsequent fate. In recent years, however, it has become clear that alternative, non-canonical RNA caps also exist, although their formation and the mechanisms by which they are attached to RNA remain only partially understood. These include alarmone caps, formed by dinucleoside polyphosphate molecules, that protect cellular RNA at moments when the cell is under threat.In their study, <a target="_blank" rel="noopener noreferrer" href="https://cahova.group.uochb.cz/en">Dr. Hana Cahová</a> and colleagues examined bacterial RNA polymerase and investigated how this enzyme can initiate transcription using dinucleoside polyphosphates (NpNs) instead of the standard RNA building blocks. For the first time, the scientists described, at the atomic level, how RNA bearing an alarmone cap can be generated directly at the initiation of gene transcription. They also observed that NpNs bind through a different type of base pairing than is typically observed.The work was significantly shaped by Valentina Serianni from Hana Cahová’s team, who demonstrated the ability of dinucleoside polyphosphates to initiate gene transcription, and by Jana Škerlová, who focused on the structural analysis of RNA polymerase. Using cryogenic electron microscopy data, she showed how dinucleoside polyphosphate molecules bind within the active site of RNA polymerase – that is, the core of the enzyme where genetic information is transcribed. Together, their findings help to elucidate the processes that accompany the transcription of genetic information from DNA to RNA.Hana Cahová adds: “We’re describing something that truly occurs in cells and that we’re now able to observe directly at the level of individual molecules. This allows us to answer fundamental questions about cellular processes, such as how cells adapt to stress. RNA plays a central role in this, as it carries the cascade of information underlying any cellular response – for example, to threatening conditions caused by nutrient deprivation or temperature shock.”<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/UOCHB_Vyzkum_z_UOCHB_odhaluje_dosud_nepoznany_zpusob_prepisu_geneticke_informace_2_0fe88ff9e9.jpg" alt="IOCB Prague/Tomáš Belloň: Research from IOCB Prague reveals a previously unknown mechanism of genetic transcription: Dr. Tomáš Kouba, head of the Cryogenic Electron Microscopy core facility." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_UOCHB_Vyzkum_z_UOCHB_odhaluje_dosud_nepoznany_zpusob_prepisu_geneticke_informace_2_0fe88ff9e9.jpg 234w," sizes="100vw" width="2000" height="1335"><div>Cryogenic electron microscopy (cryo-EM) was central to the project. This part of the work was led by Dr. Tomáš Kouba, one of the authors of the study. “Cryogenic electron microscopy allows us to freeze biological molecules in a state very close to their natural form and then determine their three-dimensional structure. This makes it possible to look directly into the active centers of enzymes and observe their function down to the atomic level,” he explains.Last year, IOCB Prague opened a new <a target="_blank" rel="noopener noreferrer" href="https://cryoem.group.uochb.cz/en">cryo-EM center</a> that is unique within the Czech research environment. State-of-the-art cryogenic electron microscopes are housed in a specially designed building and enable the study of biological processes with exceptional structural precision.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/UOCHB_Vyzkum_z_UOCHB_odhaluje_dosud_nepoznany_zpusob_prepisu_geneticke_informace_3_4d881e7a58.jpg" alt="IOCB Prague: Research from IOCB Prague reveals a previously unknown mechanism of genetic transcription: This work shows how NpnNs initiate bacterial transcription. Cryo-EM reveals how nucleobases pair with the template: one in canonical and one in reverse Watson–Crick mode, providing a structural basis for their function as non-canonical RNA caps." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_UOCHB_Vyzkum_z_UOCHB_odhaluje_dosud_nepoznany_zpusob_prepisu_geneticke_informace_3_4d881e7a58.jpg 245w," sizes="100vw" width="2000" height="1077"><blockquote><h4>The Original article</h4><h4><a target="_blank" rel="noopener noreferrer" href="https://www.nature.com/articles/s41589-025-02134-5">Molecular insight into 5′ RNA capping with NpnNs by bacterial RNA polymerase</a></h4>Valentina M. Serianni, Jana Škerlová, Anna Knopp Dubánková, Anton Škríba, Hana Šváchová, Tereza Vučková, Anatolij Filimoněnko, Milan Fábry, Pavlína Řezáčová, Tomáš Kouba &amp; Hana Cahova&nbsp;Nat. Chem. Biol. 21 (2026)<a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1038/s41589-025-02134-5">https://doi.org/10.1038/s41589-025-02134-5</a><h6>licensed under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/">CC-BY 4.0</a></h6></blockquote><h4>Abstract</h4>RNA capped with dinucleoside polyphosphates has been discovered in bacteria and eukaryotes only recently. The likely mechanism of this specific capping involves direct incorporation of dinucleoside polyphosphates by RNA polymerase as noncanonical initiating nucleotides. However, how these compounds bind into the active site of RNA polymerase during transcription initiation is unknown. Here, we explored transcription initiation in vitro, using a series of DNA templates in combination with dinucleoside polyphosphates and model RNA polymerase from Thermus thermophilus. We observed that the transcription start site can vary on the basis of the compatibility of the specific template and dinucleoside polyphosphate. Cryo-electron microscopy structures of transcription initiation complexes with dinucleoside polyphosphates revealed that both nucleobase moieties can pair with the DNA template. The first encoded nucleotide pairs in a canonical Watson–Crick manner, whereas the second nucleobase pairs noncanonically in a reverse Watson–Crick manner. Our work provides a structural explanation of how dinucleoside polyphosphates initiate RNA transcription.</div></div>

Research from IOCB Prague reveals a previously unknown mechanism of genetic transcription

Food adulteration is a phenomenon with a long history that has gained increasing importance in recent years due to the globalization of food supply chains and strong economic pressures. Whether it involves diluting olive oil with cheaper oils, adding sugar to honey, or the hidden use of substitutes in protein supplements, the result is a loss of consumer trust and, in some cases, a potential risk to health. Analytical chemistry plays a key role in this area by providing methods and technologies capable of identifying and quantifying target compounds as well as unwanted impurities in a wide range of food matrices.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Praha_Falsovani_potravin_a_jak_ho_odhali_analyticka_chemie_6912db5492.jpg" alt="Watrex: Food Adulteration and How It Is Revealed by Analytical Chemistry" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Watrex_Praha_Falsovani_potravin_a_jak_ho_odhali_analyticka_chemie_6912db5492.jpg 245w," sizes="100vw" width="1600" height="900"><h4>The Role of Chromatography in Forensic Food Analysis</h4>Chromatography, particularly liquid chromatography (HPLC), is one of the most effective analytical tools for separating complex mixtures of molecules. It enables:<ul><li>qualitative identification of individual components in a sample,</li><li>quantitative determination of their concentrations,</li><li>detection of impurities and unexpected components that may indicate adulteration.</li></ul>In practice, HPLC is often combined with various types of detectors (UV/VIS, DAD, refractive index detectors) or with other techniques (e.g., mass spectrometry) to increase selectivity and sensitivity.<h4>Isocratic vs. Gradient Elution</h4>In the analysis of food samples, chromatographic methods are selected according to the analytical goal:<ul><li>Isocratic HPLC uses a constant mobile phase composition throughout the analysis. It is simple, robust, and ideal for routine determinations of well-defined target analytes (e.g., sugars or vitamins).</li><li>Gradient HPLC changes the mobile phase composition during separation, enabling better resolution of complex mixtures with a wide range of polarities (e.g., peptides or phenolic compounds).</li></ul>Gradient methods are particularly useful when analytes have very different properties and high separation efficiency is required.<h4>Watrex Praha and the Contribution of Modern Systems to Food Analysis</h4><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_clanky_HPLCsystemy">Watrex Praha, s.r.o.</a> is one of the leading Czech manufacturers and distributors of liquid chromatography systems and instruments, with a long tradition dating back to 1990. The company has successfully transformed from a distributor into a manufacturer of its own HPLC and related technologies, focusing on modular, robust systems suitable even for demanding analytical tasks.Their <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products?manufacturerItems=93&amp;search=streamline">Streamline™ product line</a> includes several HPLC system concepts suitable for food analysis:<ul><li>Isocratic HPLC system – a simple yet precise configuration with a single pump, column thermostat, and UV/VIS detector; suitable for routine determination of known analytes (e.g., basic carbohydrates, food additives).</li><li>Binary gradient HPLC system – equipped with two pumps enabling mobile phase gradient formation, which enhances separation performance for complex mixtures (e.g., phenolic profiles of wine, components of aromatic extracts).</li><li>GPC/SEC system (Gel Permeation / Size Exclusion Chromatography) – a specialized solution for the determination of macromolecules and polymers, also relevant for the analysis of high-molecular-weight components in foods (e.g., polysaccharides).</li></ul><blockquote>👉<a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/Watrex_catalog_2024_ba97395f92.pdf">Product catalogue HERE</a></blockquote>Thanks to the modular nature of these systems, analysts can easily adapt the configuration to a specific analytical problem, from simple routine analyses to complex characterization of food samples.<h4>Practical Examples of Adulteration Revealed by HPLC</h4><ul><li>Detection of olive oil dilution: HPLC can separate and quantify characteristic triacylglycerols and fatty acids; unusual patterns indicate the presence of cheaper oils.</li><li>Estimation of sugar addition in honey: Isocratic HPLC with a refractive index detector can determine sugar profiles (glucose, fructose, sucrose), revealing dilution or the addition of sugar syrups.</li><li>Identification of aromatic adulterants in wine: Gradient HPLC with a PDA detector can reveal phenolic and aromatic profiles that are altered by the addition of synthetic compounds.</li></ul><h4>Conclusion</h4>Food adulteration remains a current issue that requires reliable and sensitive analytical methods. Liquid chromatography, and in particular modern HPLC systems, represent one of the most powerful tools for detecting unwanted additives, impurities, and unexpected components in complex food samples. Manufacturers such as <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_clanky_HPLCsystemy">Watrex Praha</a> provide flexible chromatographic platforms covering a wide range of analytical tasks from simple isocratic to advanced gradient and GPC/SEC applications thereby supporting analysts in ensuring food quality and consumer protection.<blockquote>Did you find this article interesting? Follow <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_clanky_HPLCsystemy">Watrex Praha</a> on their social media (<a target="_blank" rel="noopener noreferrer" href="https://www.linkedin.com/company/watrex/?viewAsMember=true">LinkedIn</a> and <a target="_blank" rel="noopener noreferrer" href="https://www.facebook.com/WatrexPrague">Facebook</a>) for more engaging topics.</blockquote>

Food Adulteration and How It Is Revealed by Analytical Chemistry

Join us for a fascinating conversation with Dr. Subhoja Chakraborty from the University of Central Florida, whose cutting-edge research targets the global challenge of malaria drug resistance. Dr. Chakraborty shares her journey from structure-based drug design during her PhD to her recent collaborative work repurposing human kinase inhibitors as rapid, selective antimalarials against drug-resistant Plasmodium falciparum strains.<h4>In this episode, you'll learn:</h4><ul><li>How structure-guided approaches reveal potential drug targets, including cysteine proteases like falcipain-2, and kinases implicated in malaria's complex life cycle.</li><li>The power of repurposing kinase inhibitors originally developed for cancer and other diseases, focusing on compound 12, which blocks hemozoin formation and protein kinase 6—key steps in parasite survival.</li><li>Lab techniques such as affinity, gel filtration, and size exclusion chromatography for recombinant protein purification—and how troubleshooting is crucial for high-yield, stable complexes.</li><li>Advances in mass spectrometry for characterizing protein interactions, validating drug targets, and mapping molecular pathways pivotal to malaria therapeutics.</li><li>Tips and lessons for new researchers facing the challenges of sample preparation, complex protocols, and working as part of a collaborative team.</li></ul>Dr. Chakraborty’s insights bridge the gap between basic science and translational drug discovery, offering hope for more effective, targeted malaria treatments in a world where resistance to frontline therapies threatens millions.<h4>Referenced Papers:</h4><ul><li>"Plasmodium falciparum protein kinase 6 and hemozoin formation are inhibited by a type II human kinase inhibitor exhibiting antimalarial activity" (Cell Chemical Biology, 2025)</li><li>"New insights of falcipain 2 structure from Plasmodium falciparum 3D7 strain" (BBRC, 2022)</li><li>"Structure-Based Optimization of Protease−Inhibitor Interactions to Enhance Specificity of Human Stefin‑A against Falcipain‑2 from the Plasmodium falciparum 3D7 Strain" (Biochemistry, 2023)</li></ul>If you’re a student, scientist, or simply passionate about advances in infectious disease research, this episode offers actionable insights, inspiring advice, and a front-row seat to innovation in combating malaria.<h3>Video Transcription</h3><h4>From Structural Biology to Drug Discovery: Chromatography and Mass Spectrometry in Malaria Research</h4><h5>Introduction</h5>In this discussion, Subhoja shares insights into her research journey, focusing on malaria drug discovery and the role of modern analytical techniques in biological and biomedical research. The conversation is aimed primarily at undergraduate students and early-career researchers interested in chemistry, biotechnology, and life sciences.<h5>Research Focus: Malaria Drug Discovery and Kinase Targets</h5>Subhoja is currently involved in malaria drug discovery research at the University of Central Florida, where she has been working since beginning her postdoctoral position two years ago. Her earlier PhD research focused on structure-based drug design in malaria, using a combination of in silico approaches, recombinant protein expression, and X-ray crystallography to determine precise three-dimensional structures of target proteins and their inhibitors.This structural perspective provided a foundation for her current work, which centers on drug discovery through compound screening and repurposing. A recent publication from her laboratory explores the use of repurposed mammalian CDK-like kinase inhibitors as potential antimalarial agents. While such kinase inhibitors are well known in cancer and cardiovascular research, their application to malaria targets represents a novel and promising approach.Kinases are attractive drug targets because of their central role in cell signaling and growth pathways. By targeting specific kinases involved in different stages of the malaria parasite life cycle—whether asexual growth, gametocytogenesis, or differentiation—it may be possible to significantly inhibit parasite growth and progression.<h5>Chromatography in Protein Expression and Purification Workflows</h5>Chromatography plays a critical role throughout Subhoja’s research. Her experience spans from basic chromatography techniques during her early training to advanced protein purification workflows using affinity chromatography, gel filtration (size exclusion chromatography), and ion exchange chromatography.Recombinant proteins are routinely purified using affinity resins such as nickel or cobalt, followed by further purification to remove contaminants. Fast Protein Liquid Chromatography (FPLC) enables compact, stepwise purification workflows suitable for producing proteins for in vitro assays.A recurring challenge in this process is the expression of high-molecular-weight proteins, which often accumulate in insoluble fractions or inclusion bodies. Careful selection of expression vectors, host systems, and induction conditions is therefore essential to maximize yield and solubility.<h5>Integrating Size Exclusion Chromatography into the Workflow</h5>Size exclusion chromatography (SEC) is typically used after affinity purification to further improve protein purity. Following elution with imidazole or glutathione, desalting is required to prevent buffer components from interfering with downstream assays. This is often achieved using desalting columns such as G-25 or PD-10.To remove lower-molecular-weight contaminants, finer SEC media—such as Superdex or Sephacryl columns—are employed. Concentration steps using molecular-weight cut-off filters are then applied to obtain the desired protein concentration for functional studies.These iterative purification and troubleshooting steps are a routine part of protein biochemistry and reflect the importance of methodical optimization and careful validation.<h5>The Role of Mass Spectrometry in Biomolecular Characterization</h5>Mass spectrometry is a key analytical tool in Subhoja’s research pipeline, particularly for target identification and validation. In both malaria and cancer research, MS is used alongside chromatography, immunoprecipitation, and pull-down assays to study protein interactions and molecular recognition events.Affinity-based mass spectrometry enables the identification of binding partners and interactors, whether studying proteins, long non-coding RNAs, or protein complexes. Techniques such as native MS, tandem affinity purification, and proximity labeling (e.g., TurboID-based workflows) provide deeper insights into molecular networks and signaling pathways.These approaches are essential for understanding how candidate drug targets function within complex biological systems.<h5>Sample Preparation Challenges in Biological Research</h5>Sample preparation remains one of the most challenging aspects of biological experimentation. Whole-cell lysates contain proteases, nucleases, and other components that can rapidly degrade target molecules. Preventing degradation requires minimizing preparation time, maintaining low temperatures, and using appropriate inhibitor cocktails.Reproducibility is also critical: biological experiments require multiple replicates, and variability is often unavoidable. Careful handling, protocol optimization, and continuous troubleshooting are essential to ensure reliable results, whether preparing samples for chromatography, mass spectrometry, sequencing, or immunoprecipitation.<h5>Advances in Chromatography and MS for Malaria Research</h5>Modern advances in chromatography and mass spectrometry significantly enhance malaria research by enabling precise target identification, quantification, and functional characterization. Drug discovery workflows begin with construct design and recombinant expression, followed by purification and interaction studies.In malaria research, stage-specific parasite biology requires careful extraction and analysis of proteins from different life cycle stages. Tandem affinity MS, immunoprecipitation, and in vivo validation studies help confirm target relevance and therapeutic potential.Recent work on repurposed kinase inhibitors has shown promising results, including inhibition of hemozoin formation—a key detoxification pathway for the malaria parasite—highlighting the potential of such compounds for further development.<h5>Malaria, Drug Resistance, and Global Impact</h5>Malaria remains a major global health burden, with over 600,000 deaths annually and widespread drug resistance complicating treatment. Artemisinin resistance, particularly associated with mutations in the K13 propeller domain, has driven the search for new targets and therapies.During her PhD, Subhoja focused on falcipain-2, a cysteine protease involved in hemoglobin degradation within the parasite. This pathway is critical for parasite survival and has emerged as a promising drug target. Her work revealed that falcipain-2 operates within a larger protein complex responsible for hemoglobin processing and amino acid release.Understanding these molecular mechanisms is essential for developing robust, stage-specific antimalarial strategies.<h5>Advice for Early-Career Researchers</h5>For researchers just starting out, Subhoja emphasizes the importance of hands-on experience. Working directly with cells, lysates, and analytical tools is essential for truly understanding experimental systems. Failure is an inherent part of research, and perseverance is key.Motivation, teamwork, careful sample handling, and thorough preparation all contribute to long-term success. Reading extensively, critically evaluating one’s own work, and appreciating incremental progress are vital aspects of a sustainable research career.Every successful experiment—no matter how small—represents meaningful progress and contributes to the broader goals of science and medicine.<h5>Closing Remarks</h5>The discussion highlights how interdisciplinary approaches combining chromatography, mass spectrometry, structural biology, and biochemistry are driving advances in malaria drug discovery. Through careful experimental design, analytical rigor, and collaborative teamwork, researchers can address complex biological challenges and contribute to global health solutions.<blockquote>This text has been automatically transcribed from a video presentation using AI technology. It may contain inaccuracies and is not guaranteed to be 100% correct.</blockquote><blockquote><h4>Concentrating on Chromatography Podcast</h4>Dive into the frontiers of chromatography, mass spectrometry, and sample preparation with host David Oliva. Each episode features candid conversations with leading researchers, industry innovators, and passionate scientists who are shaping the future of analytical chemistry. From decoding PFAS detection challenges to exploring the latest in AI-assisted liquid chromatography, this show uncovers practical workflows, sustainability breakthroughs, and the real-world impact of separation science. Whether you’re a chromatographer, lab professional, or researcher you'll discover inspiring content!You can find Concentrating on Chromatography Podcast in podcast apps:<ul><li><a target="_blank" rel="noopener noreferrer" href="https://open.spotify.com/show/1wZg67rCjoGju4yhqxI3tL">Spotify</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://podcasts.apple.com/tz/podcast/concentrating-on-chromatography/id1788429185">Apple podcast</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://podscan.fm/podcasts/concentrating-on-chromatography">podscan</a></li></ul>and on <a target="_blank" rel="noopener noreferrer" href="https://www.youtube.com/@ChromatographyTalk/videos">YouTube channel</a></blockquote>

Affinity, Gel Filtration, Size Exclusion Chromatography: Repurposing Kinase Inhibitors for Malaria

Article

Product

Video

Scientists

Food

Interview

Science and research

The Institute of Organic Chemistry and Biochemistry of the Czech Academy of Sciences (IOCB Prague) is a leading scientific institution in the Czech Republic, recognized internationally. Its primary mission is basic research in the fields of chemical biology and medicinal chemistry, organic and material oriented chemistry, chemistry of natural compounds, biochemistry and molecular biology, physical chemistry, theoretical chemistry, and analytical chemistry. 

Institute of Organic Chemistry and Biochemistry of the Czech Academy of Sciences

Organomation, founded in 1959, designs and manufactures high-quality nitrogen evaporators and extraction systems. Known for innovation and durability, their lab instruments are used globally for efficient sample preparation with strong customer support.

Organomation

WATREX Prague is the distributor and producer of HPLC techniques in the Czech Republic and Slovakia. Main Chromatografic and Related Techniques Supported: LC, GPC, IC, IEC, Automated SPE, LC Columns and special column packings, LC method development, Software development, Laboratory Robots.

Watrex Praha

Thermo Scientific Dionex IonPac AS23 IC Columns

Measure trace bromate and other oxyhalides in drinking water, ground water with Thermo Scientific Dionex IonPac AS23 carbonate eluent anion-exchange column. 

Measure trace bromate and other oxyhalides in drinking water, ground water, wastewater, and other diverse sample matrices with the Thermo Scientific™ Dionex™ IonPac™ AS23 carbonate eluent anion-exchange column. The column is specifically designed and recommended for the determination of trace bromate, a toxic byproduct of ozone disinfection, in drinking water matrices. The column's high capacity and selectivity facilitate the determination of bromate in drinking water at the low-μg/L level in the presence of high concentration of chloride, sulfate and carbonate. The Dionex IonPac AS23 columns meet the performance requirements of U.S. EPA Methods 300.0 and 300.1.<h5>Analysis of Trace Level Bromate in Drinking Water</h5><ul><li>Compliance monitoring of common anions and oxyhalides in drinking water as specified in U.S. EPA Method 300.0 and 300.1</li><li>Simple analysis of trace bromate in drinking water matrices using an isocratic carbonate/bicarbonate eluent with suppressed conductivity detection</li><li>Optimized selectivity to ensure low ppb determination of bromate in the presence of very high concentrations of chloride, sulfate, and carbonate</li><li>Separates oxyhalides and common inorganic anions in drinking water, groundwater, wastewater and other diverse sample matrices</li><li>High capacity for the analysis of most drinking water without the use of sample pretreatment or preconcentration</li><li>Solvent compatibility for easy column cleanup after the analysis of samples with hydrophobic components</li></ul><h5>Multiple Formats Available for Application Flexibility</h5><ul><li>4x250mm, 2x250mm analytical columns</li><li>4x50mm, 2x50mm guard columns</li><li>Longer 250mm columns facilitate higher resolution separations of more complex sample matrices</li><li>Smaller i.d. columns provide higher mass sensitivity, eluent and reagent conservation and lower operating costs</li></ul>Note: For simple, accurate eluent preparation, use the Dionex IonPac AS23 Eluent Concentrate.<h4>Specifications</h4><ul><li>Anion Exchange Capacity: 320 μeq</li><li>Crosslinking: 55% DVB</li><li>Column Capacity: 320 μeq</li><li>Column Chemistry: Carbonate/Bicarbonate</li><li>For Use With (Application): Anion Exchange</li><li>Ion Exchange Group: Alkanol Quaternary Ammonium Ion</li><li>Max. Pressure: 3000 psi (207 bar)</li><li>Solvent Compatibility: 0 to 100% HPLC Solvents</li><li>Stationary phase: IonPac AS23</li><li>Format: Standard Bore</li><li>Packing Material: Polymeric</li></ul>

Thermo Scientific Dionex IonPac AS27 IC Columns

Achieve high resolution separations of trace oxyhalides and inorganic anions in drinking water using Thermo Scientific Dionex IonPac AS27 Analytical and Guard columns.

Achieve high resolution separations of trace oxyhalides and inorganic anions in drinking water using Thermo Scientific™ Dionex™ IonPac™ AS27 Analytical and Guard columns. These hydroxide-selective anion-exchange columns allows analysis of most drinking water preserved with ethylenediamine (EDA) without sample pretreatment or preconcentration. The Dionex IonPac AS27 columns meets the performance requirements of US EPA Methods 300.0 and 300.1.<h5>Analyzes Oxyhalides and Inorganic Anions in Drinking Water</h5><ul><li>Optimized for analysis of trace bromate in drinking water preserved with EDA</li><li>High capcity: 220μeq per column (4x250mm)</li><li>Meets or exceeds performance requirements of US EPA Methods 300.0 and 300.1</li><li>Column selectivity is optimized for 30°C operating temperature</li><li>Compatible with organic solvents</li></ul><h5>Choose from Multiple Formats for Application Flexibility</h5><ul><li>4x250mm, 2x250mm, 0.4x250mm analytical columns</li><li>4x50mm, 2x50mm, 0.4x50mm guard columns</li></ul><h4>Specifications</h4><ul><li>Anion Exchange Capacity: 220 μeq</li><li>Crosslinking: 55% DVB</li><li>Column Capacity: 220 μeq</li><li>Column Chemistry: Hydroxide</li><li>For Use With (Application): Anion Exchange</li><li>Ion Exchange Group: Alkanol Quaternary Ammonium Ion</li><li>Max. Pressure: 3000 psi (207 bar)</li><li>Solvent Compatibility: pH 0 to 14, 0 to 100% HPLC Solvents</li><li>Stationary phase: Super Macroporous Resin</li><li>Format: Standard Bore</li><li>Packing Material: Polymeric</li></ul>

Thermo Scientific Dionex IonPac AS28-Fast-4μm IC Columns

Analyze trace inorganic anions and low molecular weight organic acids using the Thermo Scientific Dionex IonPac AS28-Fast-4μm ion chromatography (IC) columns. 

Analyze trace inorganic anions and low molecular weight organic acids using the Thermo Scientific™ Dionex™ IonPac™ AS28-Fast-4μm ion chromatography (IC) columns. Designed specifically for trace level analysis of high purity water from semiconductor and power industries, this column combines the selectivity of the Thermo Scientific™ Dionex™ IonPac™ AS15 column, with fast, high efficiency, and high resolution separations. The Dionex IonPac AS28-Fast-4μm columns uses smaller 4μm resin particles for more efficient separations resulting in more accurate peak integration and more reliable results.<h5>Applications for Dionex IonPac AS28-Fast-4μm IC Columns</h5><ul><li>Separation of common anions and low molecular weight organic acids</li><li>For both high purity water matrices and complex matrices including chemical and petrochemical samples</li><li>Compatible with organic solvents to enhance analyte solubility, modify column selectivity, and facilitate effective column clean-up</li></ul><h5>Superior Performance</h5><ul><li>Improved efficiencies and resolution compared to the Dionex IonPac AS15 column</li><li>Easily transfer applications from the Dionex IonPac AS15 column to the AS28-Fast-4μm column due to the similar selectivity</li></ul><h5>For Use With a High-Pressure IC System</h5>Higher resolution is achieved through the use of smaller resin particles, which produce a column backpressure over 3000 psi at the standard flow rates. A high-pressure IC system, such as the Thermo Scientific™ Dionex™ ICS-5000+ HPIC™ or the Thermo Scientific Dionex ICS-4000 Capillary HPIC system is required to operate this column under standard conditions and take advantage of elevated flow rates and faster run times.<h5>Reduce Operating Costs With Lower Eluent Requirements</h5>The Dionex IonPac AS28-Fast-4μm capillary columns provide the same performance as the standard bore and microbore Dionex IonPac AS28-Fast-4μm columns because they are packed with the same material. Operating costs are reduced because the capillary system operates at only 1% of the eluent flow rate of the standard bore system, requiring less eluent and producing less waste.<h5>Multiple Formats Available</h5><ul><li>4 x 150mm and 2 x 150mm analytical columns</li><li>4 x 30mm and 2 x 30mm analytical guard columns</li><li>0.4 x 150mm capillary columns</li><li>0.4 x 35mm capillary guard columns</li><li>Smaller i.d. columns provide higher mass sensitivity, eluent and reagent conservation, and lower operating costs</li></ul><h4>Specifications</h4><ul><li>Anion Exchange Capacity: 230 μeq</li><li>Crosslinking: 55% DVB</li><li>Column Capacity: 230 μeq</li><li>Column Chemistry: Hydroxide</li><li>For Use With (Application): Anion Exchange</li><li>Ion Exchange Group: Alkanol Quaternary Ammonium Ion</li><li>Max. Pressure: 5000 psi (345 bar)</li><li>Solvent Compatibility: pH 0 to 14, 0 to 100% Acetonitrile, Methanol, and Isopropanol</li><li>Stationary phase: Super Macroporous Ethylvinylbenzene Polymer Cross-Linked with Divinylbenzene</li><li>Format: Standard Bore</li><li>Packing Material: Ethylvinylbenzene/Divinylbenzene</li></ul>

Thermo Scientific Dionex IonPac AS29-Fast-4μm IC Columns

Analyze inorganic anions in high ionic strength matrices using Thermo Scientific™ Dionex™ AS29-Fast-4μm ion chromatography (IC) columns.

Analyze inorganic anions in high ionic strength matrices using Thermo Scientific™ Dionex™ AS29-Fast-4μm ion chromatography (IC) columns. Specifically designed to handle high ionic strength samples, Dionex IonPac AS29-Fast-4μm columns can easily separate the common inorganic anions in less than 10 minutes and can tolerate samples with high or low pH without requiring any pretreatment. They are ideal for analzying drinking water, wastewater, process streams, and scrubber solutions. Use with the Dionex AS29 Eluent Concentrate for fast, convenient, and reliable eluent preparation.<h5>Fast separation of common inorganic anions with excellent resolution</h5><ul><li>Achieve fast, isocratic separation of common inorganic anions in less than 10 minutes.</li><li>Analyze high ionic strength samples without compromising the separation of other analytes.</li><li>Excellent resolution of carbonate away from the common inorganic anions.</li><li>Robust stationary phase can tolerate acidic or basic samples without the need for pretreatment.</li><li>Similar peak efficiency to Dionex IonPac AS22-Fast-4μm column with the same elution order.</li><li>Solvent compatibility permits easy column cleanup after the analysis of samples with hydrophobic components.</li><li>Use with Dionex AS29 Eluent Concentrate for simple and accurate eluent preparation.</li></ul><h5>Use with a High Pressure IC system</h5>Higher resolution is achieved through the use of smaller resin particles, which produce a column backpressure over 3000 psi at the standard flow rates. A high-pressure IC system, such as the Thermo Scientific™ Dionex™ ICS-5000+ HPIC™ system or Thermo Scientific™ Dionex™ Integrion™ HPIC system is required to operate this column under standard conditions.<h4>Specifications</h4><ul><li>Anion Exchange Capacity: 126 μeq</li><li>Crosslinking: 55% DVB</li><li>Column Capacity: 126 μeq</li><li>Column Chemistry: Carbonate/Bicarbonate</li><li>For Use With (Application): Anion Exchange</li><li>Ion Exchange Group: Alkanol Quaternary Ammonium Ion</li><li>Max. Pressure: 5000 psi (345 bar)</li><li>Solvent Compatibility: pH 0 to 14, 0 to 100% Organic HPLC Solvents</li><li>Stationary phase: Super Macroporous Resin</li><li>Format: Standard Bore</li><li>Packing Material: Ethylvinylbenzene/Divinylbenzene</li></ul>

Thermo Scientific Dionex IonPac AS30 IC Columns

Achieve high resolution separations of trace oxyhalides and inorganic anions in drinking water with Thermo Scientific Dionex IonPac AS30 columns.

Achieve high resolution separations of trace oxyhalides and inorganic anions in drinking water with Thermo Scientific™ Dionex™ IonPac™ AS30 columns. The column selectivity has been optimized for trace level analysis of bromate in drinking water preserved with ethylenediamine (EDA). EDA is used as a preservative in some drinking water samples and can cause interference with early eluting peaks. The high capacity of this hydroxide-selective anion-exchange column allows large loop injections for trace analysis (μg/L) without sample pre-treatment or preconcentration.<h5>Superior Chromatographic Performance</h5><ul><li>Optimized for analysis of trace bromate in drinking water preserved with EDA</li><li>High capacity: 477 μeq/column (4 x 250 mm) allows large loop injections for trace analysis</li><li>Column selectivity has been optimized at an operating temperature of 30°C</li><li>Compatible with organic solvents</li></ul><h5>Unique Selectivity for Samples Preserved with Ethylenediamine</h5>The selectivity of the Dionex IonPac AS30 column has been optimized to facilitate quantitation of trace levels of bromate in drinking water containing up to 50 ppm ethylenediamine (EDA). Ethylenediamine is sometimes added to drinking water samples as a preservative and can react with carbonate to produce artifacts that interfere with early eluting analytes such as fluoride. The Dionex IonPac AS30 column minimizes this interference by increasing the separation between fluoride and the EDA carbamate artifact, allowing better integration of the fluoride peak. In comparison to the Dionex IonPac AS19 and IonPac AS27 columns, the Dionex IonPac AS30 column features unique selectivity and much higher column capacity to enable separation of fluoride from the EDA carbamate artifact as well as separation of carbonate and sulfate for better quantification of sulfate.The Dionex IonPac AS30 column is suitable for determining bromate at 5 ppb in a matrix containing up to 50 ppm each of chloride, carbonate, and sulfate. For trace bromate analysis below 5 ppb in higher ionic strength matrices (where chloride levels exceed 50 ppm), the Dionex IonPac AS19 column is recommended. Alternatively, the Dionex IonPac AS27 column is recommended for higher ionic strength matrices preserved with EDA.<h5>Use with a High-Pressure IC system</h5>A high-pressure IC system such as the Thermo Scientific™ Dionex™ ICS-5000+, Dionex ICS-6000, or Dionex Integrion HPIC™ system is required to use this column under standard operating conditions.<h4>Specifications</h4><ul><li>Anion Exchange Capacity: 6 μeq</li><li>Crosslinking: 55% DVB</li><li>Column Capacity: 477 μeq</li><li>Column Chemistry: Hydroxide</li><li>For Use With (Application): Anion Exchange</li><li>Ion Exchange Group: Alkanol Quaternary Ammonium Ion</li><li>Max. Pressure: 5000 psi (345 bar)</li><li>Solvent Compatibility: pH 0 to 14, 0 to 100% HPLC Solvents</li><li>Stationary phase: Super Macroporous Resin</li><li>Format: Standard Bore</li><li>Packing Material: Ethylvinylbenzene/Divinylbenzene</li></ul>

Thermo Scientific Dionex IonPac AS32-Fast-4μm IC Columns

Resolve polythionates, persulfate, polysulfonated aromatics, and aromatic dyes and pigments with the Thermo Scientific Dionex IonPac AS32-Fast-4μm column.

Resolve polythionates, persulfate, polysulfonated aromatics, and aromatic dyes and pigments with the Thermo Scientific™ Dionex™ IonPac™ AS32-Fast-4μm column. The unique selectivity of the Dionex IonPac AS32-Fast-4μm column allows it to resolve trace amounts of perchlorate in matrices containing high levels of chloride and sulfate within ten minutes using simple, isocratic conditions. Compared to similar anion-exchange columns packed with 7-9μm resin particles, Dionex IonPac AS32-Fast-4μm columns produce more efficient peaks, resulting in more accurate integration and more reliable results.<h5>Superior Chromatographic Performance</h5><ul><li>High capacity allows injection of complex matrices without overloading the column while maintaining excellent peak shapes for lower concentration analytes.</li><li>Ultralow hydrophobicity and reduced 150mm column length allow for fast analysis of highly polarizable anions such as perchlorate and iodide with a simple, isocratic eluent.</li><li>Quickly separate disparate concentration ratios (1:1000) of perchlorate in high sulfate matrices using simple, isocratic conditions.</li><li>Separate polythionates such as dithionate, trithionate, and tetrathionate.</li><li>Separate color additives including FD&amp;C Yellow #5, FD&amp;C Yellow #6, FD&amp;C Blue #1, and FD&amp;C Red #40 using a hydroxide gradient.</li></ul><h5>Use with a High-Pressure IC system</h5>A high-pressure IC system, such as the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/410">Thermo Scientific™ Dionex™ ICS-6000 HPIC system</a> or <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/408">Thermo Scientific™ Dionex™ Integrion™ HPIC system</a> is required to operate this column under standard conditions.<h4>Specifications</h4><ul><li>Anion Exchange Capacity: 126 μeq</li><li>Crosslinking: 55% DVB</li><li>Column Capacity: 126 μeq</li><li>Column Chemistry: Hydroxide</li><li>For Use With (Application): Anion Exchange</li><li>Ion Exchange Group: Alkanol Quaternary Ammonium Ion</li><li>Max. Pressure: 5000 psi (345 bar)</li><li>Solvent Compatibility: pH 0 to 14, 0 to 100% HPLC Solvents</li><li>Stationary phase: Super Macroporous Resin</li><li>Format: Standard Bore</li><li>Packing Material: Ethylvinylbenzene/Divinylbenzene</li></ul>

Thermo Scientific Dionex IonPac AS4A-SC IC Columns

For fast, isocratic separation of inorganic anions in environmental waters, the Thermo Scientific Dionex IonPac AS4A-SC column was the preferred column for many years. 

For fast, isocratic separation of inorganic anions in environmental waters, the Thermo Scientific™ Dionex™ IonPac™ AS4A-SC column was the preferred column for many years. It was first introduced in 1984 and is the specified column in U.S. EPA Method 300.0 (A). However, the advanced, high-capacity Dionex IonPac AS22 Carbonate Eluent Anion-Exchange column is recommended for fast analysis of inorganic anions in diverse matrices when using carbonate eluents.<h5>Fast Isocratic Separation of Inorganic Anions in Simple Matrices</h5><ul><li>Compliance monitoring of common anions in drinking water as specified in U.S. EPA Methods 300.0 (A)</li><li>Separation of common inorganic anions in 10 minutes in water, food and beverages, and other diverse sample matrices</li><li>Compatible with sodium tetraborate gradient to optimize difficult separations</li><li>Solvent compatibility for easy column cleanup after the analysis of samples with hydrophobic components</li></ul><h5>Multiple Formats Available for Application Flexibility</h5><ul><li>4×250mm, 2x250mm analytical columns</li><li>4×50mm, 2x50mm guard columns</li><li>Longer 250mm columns facilitate higher resolution separations of more complex sample matrices</li><li>Smaller i.d. columns provide higher mass sensitivity, eluent and reagent conservation and lower operating costs</li></ul>Note: Use with the Dionex IonPac AS4A Eluent Concentrate for simple, accurate eluent preparation.<h4>Specifications</h4><ul><li>Column Capacity: 20 μeq</li><li>Column Chemistry: Carbonate/Bicarbonate</li><li>Crosslinking: 0.5% DVB</li><li>For Use With (Application): Separation of Inorganic Anions, Anion Exchange</li><li>Ion Exchange Group: Alkanol Quaternary Ammonium Ion</li><li>Max. Pressure: 4000 psi (275 bar)</li><li>Solvent Compatibility: pH 0 to 14, 0 to 100% HPLC Solvents</li><li>Stationary phase: IonPac AS4A-SC</li><li>Packing Material: Ethylvinylbenzene/Divinylbenzene</li></ul>

Thermo Scientific Dionex IonPac AS9-SC IC Columns

Separate inorganic anions and oxyhalides in simple matrices using an isocratic carbonate/bicarbonate eluent with the Thermo Scientific™ Dionex™ IonPac™ AS9-SC Carbonate Eluent Anion-Exchange Column.

Separate inorganic anions and oxyhalides in simple matrices using an isocratic carbonate/bicarbonate eluent with the Thermo Scientific™ Dionex™ IonPac™ AS9-SC Carbonate Eluent Anion-Exchange Column. The Dionex IonPac AS9-SC column is specified in US EPA Method 300.0 (B), and meets or exceeds the performance requirements of this method. However, the advanced, high-capacity Dionex IonPac AS23 Carbonate Eluent Anion-Exchange column is recommended for determination of oxyhalides and inorganic anions, such as trace bromate, in ozonated drinking water.<h5>Fast Separation of Inorganic Anion and Oxyhalides in Simple Matrices</h5><ul><li>Compliance monitoring of common anions and oxyhalides in drinking water as specified in U.S. EPA Methods 300.0 (B)</li><li>Simple, isocratic separation of inorganic anions in less than 10 minutes in drinking water</li><li>Fast isocratic separation of inorganic anions and oxyhalides in ozonated drinking water matrices</li><li>Solvent compatibility permits easy column cleanup after the analysis of samples with hydrophobic components.</li></ul><h5>Formats Available for Application Flexibility</h5><ul><li>4x250mm analytical columns</li><li>4x50mm guard columns</li><li>Longer 250mm columns facilitate higher resolution separations of more complex sample matrices</li></ul><h4>Specifications</h4><ul><li>Column Capacity: 30 to 35 μeq</li><li>Column Chemistry: Carbonate/Bicarbonate</li><li>For Use With (Application): Separation of Oxyhalides and Inorganic Anions, Anion Exchange</li><li>Ion Exchange Group: Alkyl Quaternary Ammonium</li><li>Max. Pressure: 4000 psi (275 bar)</li><li>Solvent Compatibility: pH 2 to 11, 0 to 100% HPLC Solvents</li><li>Stationary phase: IonPac AS9-SC</li><li>Packing Material: Ethylvinylbenzene/Divinylbenzene</li></ul>

Thermo Scientific Dionex IonPac AS23-4μm IC Columns

Analyze trace bromate and other oxyhalides in drinking water, ground water, wastewater, and other diverse matrices using the Thermo Scientific™ Dionex™ IonPac™ AS23-4μm columns. 

Analyze trace bromate and other oxyhalides in drinking water, ground water, wastewater, and other diverse matrices using the Thermo Scientific™ Dionex™ IonPac™ AS23-4μm columns. The high capacity and selectivity of this column facilitates the determination of trace bromate at low-μg/L levels in the presence of high amounts of chloride, sulfate, and carbonate. Compared to <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/2058">Dionex IonPac AS23 column</a>, the new Dionex IonPac AS23-4μm columns use smaller resin particles for more efficient separations resulting in more accurate peak integration and more reliable results.<h5>Designed Specifically for Trace Bromate Analysis in Drinking Water</h5><ul><li>Use the Dionex IonPac AS23-4μm for diverse matrices including drinking water, ground water, and waste water.</li><li>High capacity allows routine drinking water analysis without sample pretreatment or preconcentration.</li><li>Improved efficiencies and resolution compared to the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/2058">Dionex IonPac AS23 column</a>.</li><li>Easily transfer applications from the Dionex IonPac AS23 column to the AS23-4μm column due to the similar selectivity.</li><li>Compatible with organic solvents to enhance analyte solubility, modify column selectivity, and facilitate effective column clean-up.</li></ul><h5>Use With a High-Pressure IC System</h5>Higher resolution is achieved through the use of smaller resin particles, which produce a column backpressure over 3000psi at the standard flow rates. A high-pressure IC system, such as the Thermo Scientific™ Dionex™ ICS-5000+ HPIC™ or the Thermo Scientific™ Dionex™ Integrion™ HPIC™ system is required to operate this column under standard conditions and take advantage of elevated flow rates and faster run times.<h5>Multiple Formats Available</h5><ul><li>4x250mm and 2x250mm analytical columns</li><li>4x50mm and 2x50mm guard columns</li></ul>Note: Use the Dionex AS23 Eluent Concentrate for simple, accurate eluent preparation.<h4>Specifications</h4><ul><li>Anion Exchange Capacity: 320 μeq</li><li>Crosslinking: 55% DVB</li><li>Column Capacity: 320 μeq</li><li>Column Chemistry: Carbonate/Bicarbonate</li><li>For Use With (Application): Anion Exchange</li><li>Ion Exchange Group: Alkanol Quaternary Ammonium Ion</li><li>Max. Pressure: 5000 psi (345 bar)</li><li>Solvent Compatibility: pH 0 to 14, 0 to 100% HPLC Solvents</li><li>Stationary phase: IonPac AS23-4μm</li><li>Format: Standard Bore</li><li>Packing material: Polyvinylbenzyl Ammonium Polymer/Divinylbenzene</li></ul>

Thermo Scientific Dionex IonPac AS22 Fast IC Columns

Thermo Scientific™ Dionex™ IonPac™ AS22-Fast column combines the selectivity of the Dionex IonPac AS22 column with super-fast separation times. 

Designed specifically for compliance monitoring of inorganic anions in accordance with U.S. EPA Methods 300.0 (A), the Thermo Scientific™ Dionex™ IonPac™ AS22-Fast column combines the selectivity of the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/2057">Dionex IonPac AS22 column</a> with super-fast separation times. With the Dionex IonPac AS22-Fast column, you can quickly and simply separate common inorganic anions from a variety of sample matrices including drinking water, wastewater, process streams, and scrubber solutions.<h5>Super Fast Analysis of Inorganic Anions and Low Molecular Weight Organic Acids in Diverse Matrices</h5><ul><li>Compliance monitoring of common anions in drinking water as specified in U.S. EPA Method 300.0 (A)</li><li>Super-fast isocratic separation of common inorganic anions in less than 5 min in diverse matrices such as drinking water, surface water, groundwater, and wastewater</li><li>Sufficient capacity to maintain resolution even in a short column format, which helps laboratories achieve higher productivity and increased throughput</li><li>Excellent resolution of the carbonate peak away from the common inorganic anions</li><li>Faster alternative, using carbonate/bicarbonate eluents, for Dionex IonPac AS4A-SC, AS12A, AS14, AS14A and AS22 inorganic anion applications.</li><li>Solvent compatibility permits easy column cleanup after the analysis of samples with hydrophobic components.</li></ul><h5>Multiple Formats Available for Application Flexibility</h5><ul><li>4x150mm, 2x150mm analytical columns</li><li>4x30mm, 2x30mm guard columns</li><li>Shorter 150mm columns produce faster runs of relatively clean matrices</li><li>Smaller i.d. columns provide higher mass sensitivity, eluent and reagent conservation and lower operating costs</li></ul>Note: For simple, accurate eluent preparation, use the Dionex IonPac AS22 Eluent Concentrate.<h4>Specifications</h4><ul><li>Anion Exchange Capacity: 126 μeq</li><li>Crosslinking: 55% DVB</li><li>Column Capacity: 126 μeq</li><li>Column Chemistry: Carbonate/Bicarbonate</li><li>For Use With (Application): Anion Exchange</li><li>Ion Exchange Group: Alkanol Quaternary Ammonium Ion</li><li>Max. Pressure: 3000 psi (207 bar)</li><li>Solvent Compatibility: pH 0 to 14, 0 to 100% HPLC Solvents</li><li>Stationary phase: IonPac AS22-Fast</li><li>Format: Standard Bore</li><li>Packing Material: Polymeric</li></ul>

Products from category Ion Chromatography Columns (IC) - page 3

Related content

Affinity, Gel Filtration, Size Exclusion Chromatography: Repurposing Kinase Inhibitors for Malaria

Research from IOCB Prague reveals a previously unknown mechanism of genetic transcription

Food Adulteration and How It Is Revealed by Analytical Chemistry