<h5><strong>Tasty beer starts with knowing what’s in your hops. Explore how online SPE makes bitter acid analysis in hops faster and more reliable.</strong></h5><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Fisher_Scientific_How_Bitter_Acid_Analysis_Helps_Brewers_Better_Control_Beer_Flavors_326238593f.jpeg" alt="Thermo Fisher Scientific: How Bitter Acid Analysis Helps Brewers Better Control Beer Flavors." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Fisher_Scientific_How_Bitter_Acid_Analysis_Helps_Brewers_Better_Control_Beer_Flavors_326238593f.jpeg 245w," sizes="100vw" width="1024" height="512"></p><h3><strong>How can you detect bitter acid profiles quickly, reliably, and more sustainably?</strong></h3><p>For craft brewers and beer lovers alike, a refreshing experience is all about flavor.</p><p>So how can you achieve the desired bitterness in your beer? The answer is not just about the recipe. Finding the right flavor profile starts with the bitter acids present in the starting hops material.</p><div><div><p>Hops (the heart of your favorite beer) are the source of the brew’s distinctive flavor tied to bitterness and aroma.</p><p>At the molecular level, bitterness is driven by <a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0308814622016338">α- and β-bitter acids</a>, like humulones and lupulones, whose concentrations determine the final sensory profile of the beer (<strong>Figure 1</strong>).</p><p>Accurately characterizing these compounds in each batch allows brewers to unlock the full potential of every variety of hops.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Fisher_Scientific_How_Bitter_Acid_Analysis_Helps_Brewers_Better_Control_Beer_Flavors_2_6435757c03.jpeg" alt="Thermo Fisher Scientific: How Bitter Acid Analysis Helps Brewers Better Control Beer Flavors: Figure 1. General chemical structure of hop bitter acids." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Fisher_Scientific_How_Bitter_Acid_Analysis_Helps_Brewers_Better_Control_Beer_Flavors_2_6435757c03.jpeg 222w," sizes="100vw" width="700" height="493"></p><p>While conventional analytical methods rely on long, manual sample preparation steps and hazardous solvents, laboratories now strive for greener and more efficient workflows.</p><p>And moving from manual to online sample preparation is one of the easiest ways your lab can reduce waste and — most importantly — improve reliability with automation.</p><h3><strong>Key takeaways</strong></h3><ul><li>Online SPE reduces hands-on work, shortens turnaround time, and supports more sustainable methods by cutting solvent use and eliminating single-use cartridges.</li><li>Automated UHPLC workflows are easier for new users to execute, offering more reproducible quantifications of α- and β-bitter acids in hops.</li><li>Accurate bitter acid profiles help brewers distinguish hop varieties and control flavor with confidence.</li></ul><h3><strong>Comparing offline vs. online solid phase extraction for bitter acid HPLC analysis</strong></h3><p>If you’ve spent long hours in the lab preparing samples for hops analysis, you’re not alone.</p><p>Manual sample preparation often takes the most time in hops analysis, an area where online <a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/content/lifetech/global/en/home/industrial/chromatography/chromatography-learning-center/chromatography-consumables/sample-prep.html">solid phase extraction</a> (SPE) can make a real difference. Here’s why.</p><p>Manual SPE has a lot of manual steps. Extraction. Cartridge loading. Washing. Elution. And sometimes solvent exchange or reduction. All before your actual analysis begins. This labor-intensive workflow can take up to an hour and depends strongly on operator skillsets, making reproducibility a challenge for new hires.</p><h3><strong>Online SPE analysis provides key benefits like:</strong></h3><ul><li>Hands-off workflow free of cartridges, manifolds, or vacuum steps.</li><li>Column washing and re-equilibration occur in parallel with separation.</li><li>SPE step is complete in just two minutes.</li><li>Minimizes operator-dependent variability.</li><li>Uses less than 8 mL of solvent.</li></ul><p>Let’s explore what this technique looks like in practice.</p><h3><strong>Online SPE for analyzing α- and β-bitter acids in hops standard solutions.</strong></h3><p>Changing your sample preparation from manual to automated isn’t complicated. With the right tools you can fully integrate online SPE with your UHPLC system (<strong>Figure 2</strong>).</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Fisher_Scientific_How_Bitter_Acid_Analysis_Helps_Brewers_Better_Control_Beer_Flavors_3_4fb14243b4.jpeg" alt="Thermo Fisher Scientific: How Bitter Acid Analysis Helps Brewers Better Control Beer Flavors: Figure 2. Schematic workflow for the determination of bitter acids in hops. The process involves clean up and instrumental analysis using the Thermo Scientific Vanquish Online SPE UHPLC System." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Fisher_Scientific_How_Bitter_Acid_Analysis_Helps_Brewers_Better_Control_Beer_Flavors_3_4fb14243b4.jpeg 245w," sizes="100vw" width="700" height="323"></p><h3><strong>The process for analyzing a hops standard solution is straightforward:</strong></h3><ol><li>First, extract hop samples with ethanol (a greener alternative to toluene or diethyl ether in conventional methods).</li><li>Inject the extract directly into your instrument for analysis. Bitter acids retain<a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1970"><strong> on the SPE column</strong></a> while matrix interferences that can comprise quantitation are removed.</li><li>Next, backflush the SPE column to transfer the analytes to the<a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/423"><strong> analytical column </strong></a>for separation. While this separation is taking place, the SPE column is washed and re-equilibrated in parallel, keeping the total run time to 15 minutes, with the separation of all six major bitter acids in a single analysis (<strong>Figure 3</strong>).</li></ol><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Fisher_Scientific_How_Bitter_Acid_Analysis_Helps_Brewers_Better_Control_Beer_Flavors_4_1e47405e3c.jpeg" alt="Thermo Fisher Scientific: How Bitter Acid Analysis Helps Brewers Better Control Beer Flavors: Figure 3. UV chromatogram of hop bitter acids in standard solution (1-cohumulone, 2-humulone, 3-adhumulone, 4-colupulone, 5-lupulone, 6-adlupulone)." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Fisher_Scientific_How_Bitter_Acid_Analysis_Helps_Brewers_Better_Control_Beer_Flavors_4_1e47405e3c.jpeg 245w," sizes="100vw" width="700" height="347"></p><h3><strong>Online SPE for analyzing α- and β-bitter acids in real hops samples</strong></h3><p>Analytical labs need methods that are accurate and reliable for brewers to develop distinct and reproducible flavor profiles across batches.</p><p>To assess the applicability of online SPE UHPLC methods for hops analysis, we analyzed bitter acid profiles from four species — Sultana, Barbe Rouge, Azacca, and Sabro.</p><p>The concentration of α-acids dominated all samples, while each hops species exhibited distinct profiles in terms of α-acid and β-acid content, making them suitable for different brewing strategies (<strong>Figure 4</strong>).</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Fisher_Scientific_How_Bitter_Acid_Analysis_Helps_Brewers_Better_Control_Beer_Flavors_5_3a179217db.jpeg" alt="Thermo Fisher Scientific: How Bitter Acid Analysis Helps Brewers Better Control Beer Flavors: Figure 4. Bitter acid profiles in four different hop species, error bars display SD (n=6). To check method consistency, we measured each hops extract six times. Variation between measurements was low, with relative standard deviation below 3.5 % across all hops species." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Fisher_Scientific_How_Bitter_Acid_Analysis_Helps_Brewers_Better_Control_Beer_Flavors_5_3a179217db.jpeg 245w," sizes="100vw" width="700" height="410"></p><ul><li>For testing labs, this process translates into a workflow that is easy to run, fast, and delivers reliable results without added complexity.</li><li>For craft brewers, reliability means clear, trustworthy insights into hops bitter acid profiles, for better hop selection and more precise control of bitterness and flavor in your beer.</li></ul><h3><strong>From carefully procured samples to tasty sips</strong></h3><p>Efficient UHPLC workflows support faster results, less solvent use, and reliable bitterness data for brewers. And online SPE turns those advantages into practical, day-to-day benefits for brewers and labs alike.</p><ul><li>Less hands-on skills required for lab analysts</li><li>Faster results from labs to brewers</li><li>A more sustainable way to work</li><li>Clear insights into hops flavor</li></ul><p>To learn more about the method and see the full application data, <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/cn_004238_hplc_vanquish_online_spe_bitter_acids_hops_cn004238_na_en_587a5d300b.pdf"><strong>check out our application note today</strong></a>.</p><h3><strong>FAQs</strong></h3><div><div><h5><strong>What are the key compounds in hops analyzed by HPLC?</strong></h5><p>Bitter acids, namely α-acids and β-acids, especially the six major bitter acids (humulones and lupulones) that define hop bitterness and are required for quality control and brewing decisions.</p></div><div><h5><strong>What column types are recommended for hop acid separations?</strong></h5><p>Classical C18 Silica columns are ideal for bitter acids separation. UHPLC compatible columns with particle size ≤ 2 µm boost analysis with higher flow rate, thus shorter analysis time and solvent consumption.</p></div><div><h5><strong>What’s the best workflow for hops analysis?</strong></h5><p>A typical workflow for hop analysis consists of three main steps: extraction of the target compounds, clean-up of co-extracted matrix components, and instrumental analysis by HPLC or UHPLC. To keep this workflow efficient and reproducible, you should minimize manual handling and add in automation when possible. Integrating online SPE into your LC instrument allows sample clean-up to run automatically, reducing hands-on time, solvent use, and variability while delivering faster, more reliable results.</p></div></div><blockquote><p><strong>Visit us on&nbsp;</strong><a target="_blank" rel="noopener noreferrer" href="https://www.linkedin.com/showcase/72003132/admin/dashboard/"><strong><u>LinkedIn:</u></strong></a>&nbsp;#UHPLC #Automation</p></blockquote></div></div>

How Bitter Acid Analysis Helps Brewers Better Control Beer Flavors

<p><strong>In the week of June 29, the following webinars await you in the field of liquid phase and especially HPLC and LC/MS.</strong></p><blockquote><h4><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinars"><strong>👉 DETAILS AND REGISTRATION IN THE WEBINARS SECTION</strong></a></h4><p><strong>👉 Search and filter in the largest global database</strong> with over <strong>5 500 GC, LC, MS and spectroscopy webinars</strong>.</p></blockquote><h5><strong>1. Thermo Fisher Scientific: Insights from an IC specialist: To be suppressed or not suppressed?</strong></h5><ul><li>Tu, 30.6.2026 09:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/6310">Registration</a></li></ul><p>Join Thermo Fisher’s Ask the Experts session to learn how suppressor technology impacts ion chromatography performance, sensitivity, reliability, maintenance, and troubleshooting.</p><h5><strong>2. SCIEX: Advancing Proteomics with ZenoTOF: From Single-Cell Analysis to Plasma Biomarker Discovery</strong></h5><ul><li>Tu, 30.6.2026 11:30 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/6311">Registration</a></li></ul><p>Discover how ZenoTOF high-resolution mass spectrometry is accelerating single-cell proteomics and plasma biomarker discovery through enhanced sensitivity, throughput, and automation.</p><h5><strong>3. Agilent Technologies: Measuring Diverse Samples with UV/VIS Spectrometers and Integrating Spheres</strong></h5><ul><li>Tu, 30.6.2026 20:30 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/6052">Registration</a></li></ul><p>This webinar will discuss diffuse transmission and reflection UV/VIS measurements, including how to perform measurements with Agilent’s Cary 60 UV/VIS Spectrometer.</p><h5><strong>4. Waters Corporation: Informatics series #33 Tips, Tricks and Best Practices</strong></h5><ul><li>Th, 2.7.2026 11:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/6315">Registration</a></li></ul><p>This interactive session revisits essential features, shortcuts, and practical techniques in Empower software that can streamline everyday laboratory work and reduce unnecessary effort.</p><h5><strong>5. Waters Corporation: Unlocking Therapeutic Peptide Characterisation (GLP-1RAs) with Cyclic IMS</strong></h5><ul><li>Th, 2.7.2026 15:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/6313">Registration</a></li></ul><p>Discover how cyclic ion mobility spectrometry (cyclic IMS) improves characterization of GLP-1 analogues and therapeutic peptides, supporting development, quality control, and regulatory submissions.</p><h5><strong>6. Agilent Technologies: Spectral Flow Cytometry Masterclass - Session 1</strong></h5><ul><li>Fr, 3.7.2026 07:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/6316">Registration</a></li></ul><p>Learn how full-spectrum flow cytometry enables high-dimensional cell analysis. Explore spectral flow technology, experimental design, and applications in immunology, oncology, and vaccine research.</p>

Webinars LabRulezLCMS Week 27/2026

<p><strong>The international standard ISO/IEC 17025 [1] clause 7.7.2 with regards to ensuring the validity of results, requires a laboratory to participate in proficiency testing (PT) and/or to participate in interlaboratory comparisons (ILCs) other than PT. However, no guidance as to what these other ILCs might be, or indeed how they might compare in relation to PT, is provided. This leaflet aims to outline other ILCs available, pointing out some of the limitations as compared to PT.&nbsp;</strong></p><p>There are three major types of ILCs in which a group of laboratories analyses identical portions from a homogeneous, stable test sample, with each type being characterized by its intended purpose [2,3]:</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_Interlaboratory_comparisons_other_than_proficiency_testing_2_d9263807fb.jpg" alt="Eurachem: Interlaboratory comparisons other than proficiency testing" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_Interlaboratory_comparisons_other_than_proficiency_testing_2_d9263807fb.jpg 245w," sizes="100vw" width="1507" height="607"></p><p>A key point is that PT is an ILC that is designed to specifically evaluate the performance of participants, providing them with an infrastructure to monitor and assess the validity of their results. This is not the key purpose of the two other ILCs, and thus depending on their intended purpose they have a number of limitations that laboratories need to be aware of when using them rather than PT. Only proficiency testing should have been conducted in full compliance to the competency standard ISO/IEC 17043 [4].&nbsp;</p><h4><strong>Evaluation of measurement procedure performance&nbsp;</strong></h4><p>These ILCs, are designed to assess how a particular measurement procedure performs and whether it is fit for its intended purpose. These ILCs are often referred to as a ‘method performance study’ or a ‘collaborative study’ [2]. Some limitations of using such ILCs for monitoring laboratory performance as an alternative to PT are:&nbsp;</p><ul><li>All participants use the same measurement procedure i.e. the measurement procedure that is being validated. Unless the measurement procedure is being routinely used by the participating laboratory such an ILC will not assess the routine performance of the laboratory using their own routine measurement procedure. Nor does it enable them to compare their performance with other laboratories using alternative measurement procedures.&nbsp;</li><li>The measurement procedure is likely to be new, so participants may not have established stable procedures and quality control, so performance may not reflect routine use.&nbsp;</li><li>The report from such an ILC would not provide information on the performance of the participant, if the statistical model used makes the assumption that all laboratories perform with equal variability.</li><li>The design of the study may require the participants to assess multiple samples and/or to undertake multiple replicate analysis on the test materials. This may not be representative of the routine measurements or tests undertaken by the laboratory.&nbsp;</li><li>The conclusion of the ILC might be that the measurement procedure being assessed is not valid.&nbsp;</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_Interlaboratory_comparisons_other_than_proficiency_testing_3_a53ecd2f5d.jpg" alt="Eurachem: Interlaboratory comparisons other than proficiency testing" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_Interlaboratory_comparisons_other_than_proficiency_testing_3_a53ecd2f5d.jpg 157w," sizes="100vw" width="570" height="566"></p><h4><strong>Characterisation of candidate reference materials&nbsp;</strong></h4><p>These are ILCs that assign a property value to a candidate reference material, usually with a stated measurement uncertainty. These are often referred to as a ‘material certification study’ [2]. Limitations of using such ILCs as an alternative to PT are:&nbsp;</p><ul><li>The analysis of the candidate reference material is likely to require additional care in exercising the routine measurement procedure, such as substantially more replication, and/or may require quite different reporting formats (e.g. all valid replicates instead of a mean result). Thus, such an ILC will not necessarily provide an evaluation of the performance of the laboratory based on the routine use of their measurement procedures.&nbsp;</li><li>The report from such an ILC may include the results from the participating laboratories but would not provide information on the performance of each laboratory.&nbsp;</li><li>Participating laboratories may be required to assess multiple samples and/or to undertake multiple replicate analysis on the candidate reference materials. Thus this may not be representative of the routine measurements or tests undertaken by the laboratory.&nbsp;</li></ul><h4><strong>Other ILCs&nbsp;</strong></h4><p>Some other ILCs, whilst not being conducted in full compliance of the requirements of ISO/IEC 17043, may be designed to evaluate participant performance. These would include small ILCs as defined by EA‑2/21 [5] or split sample ILCs i.e. where a portion of a single sample is sent to two or three laboratories. Whilst these ILCs are specifically designed to evaluate participant performance, they may not provide a comprehensive comparison that a PT might provide. In such cases the laboratory needs to evaluate carefully the competence of the organization managing the ILC and the suitability of the service externally provided (ISO/IEC 17025 clause 6.6).</p>

Interlaboratory comparisons other than proficiency testing

Article

Webinars

Academy

A unique company dedicated to serving science helping our customers drive productivity and accelerate results. Through our premier brands – Thermo Scientific, Applied Biosystems, Invitrogen, Fisher Scientific and Unity Lab Services.

Thermo Fisher Scientific

Eurachem is a European network promoting international traceability of chemical measurements and good analytical practice. It provides expert guidance, supports method validation, uncertainty evaluation, proficiency testing, and facilitates discussion on technical and policy issues in analytical quality.

Eurachem

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Identification of the substance – what is in your sample? (Bioanalytic)

We are able to identify metabolites and products of chemical reactions, contaminants of biological and chemical substances and preparations, and perform profiling of a series of samples to study the kinetics of transformations.

<h4><strong>Substance Identification - Looking for answers to what's in your sample? - we can help you.</strong></h4><p>Substance identification based on LC-MS/MS techniques can involve single compounds or mixtures of substances. In our analyses, we rely primarily on the knowledge and skills we have acquired after many years of work. For analysis, we use full laboratory facilities for sample preparation and high-resolution mass spectrometry (<a target="_blank" rel="noopener noreferrer" href="https://labexperts.com.pl/o-nas/">equipment</a>).</p><p>We use different work algorithms depending on the material we are dealing with and the analytical task to be solved. We use DDA (IDA) or DIA (SWATH) methods or targeted approaches (e.g. MRMhr) if we know what to expect. Thus, we are able to identify metabolites and products of chemical reactions, contaminants of biological and chemical substances and preparations, and perform profiling of a series of samples to study the kinetics of transformations.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Bioanalytic_Bioanalytic_Identification_of_the_substance_what_is_in_your_sample_2_0f425a648b.jpg" alt="Bioanalytic: Identification of the substance – what is in your sample" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Bioanalytic_Bioanalytic_Identification_of_the_substance_what_is_in_your_sample_2_0f425a648b.jpg 245w," sizes="100vw" width="1881" height="1156"></p><h4><strong>COST OF SERVICE</strong></h4><p>We determine the cost of the service individually. The final cost is influenced by many factors related to the nature of the sample itself and the client's expectations. Thus, the price depends, among other things, on the complexity of the sample preparation procedure, the scope and number of analyses, etc.</p><p><strong>The service includes (depending on individual arrangements):</strong></p><h5><strong>Development of sample preparation procedure</strong></h5><ul><li>Depending on the matrix and test substances.</li></ul><h5><strong>Development of analytical methods</strong></h5><ul><li>Application of high-resolution LC-MS/MS analyses using DDA (IDA) or DIA (SWATH) experiments and software to support the development of targeted screening methods.</li></ul><h5><strong>Analysis of results includes:</strong></h5><ul><li>finding and identifying the substances of interest, interpreting MS/MS spectra and proposing a structural formula.</li><li>Comparative analysis of sample series, e.g. PCA,</li><li>profiling of analytes in sample series</li></ul><h5><strong>Reporting of results</strong></h5><ul><li>Compile results into easy-to-read reports.</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Bioanalytic_Bioanalytic_Identification_of_the_substance_what_is_in_your_sample_3_c1b8adc1d0.jpg" alt="Bioanalytic: Identification of the substance – what is in your sample" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Bioanalytic_Bioanalytic_Identification_of_the_substance_what_is_in_your_sample_3_c1b8adc1d0.jpg 245w," sizes="100vw" width="1919" height="1208"></p>

Characteristics of monoclonal antibodies (Bioanalytic)

At LabExperts, proteomic analyses are performed on a ZenoTOF 7600 high-resolution LC-MS/MS system (SCIEX). For MS/MS analyses, we use Collision induced dissociation (CID) and Electron-Activated Dissociation (EAD) fragmentation.

<p><strong>Antibodies are molecules made up of 4 polypeptide chains: two heavy (H - high-chain) linked to each other by a specific type of chemical bond - a disulfide bridge, and two light (L - light-chain) linked by an identical bond to the heavy chains. Monoclonal antibodies (mABs) are used in various forms - as free molecules, in the form of a drug-antibody combination, and in the form of an immunoconjugate, a drug-antibody-biopolymer combination.</strong></p><p>Their main use is in highly specific targeted therapy for cancer, cardiovascular, autoimmune and nervous system diseases. They are also used in the treatment of osteoporosis, Alzheimer's disease or transplantation. The range of applications of monoclonal antibodies is systematically expanded. The introduction of a new antibody to the market requires complex product characterization, which involves numerous proteomic analyses, which are performed by LC-MS/MS techniques, among others.</p><h4><strong>LC-MS/MS</strong></h4><p>The characterization of monoclonal antibodies involves many aspects, including, but not limited to, a suite of analyses related to confirmation of the structure, chain sequence and degree of modification of the antibody. Post-translational modifications (PTMs) are chemical changes that occur after the translation process. These changes generally result in an increase in the immunogenicity of the drug. For this reason, it is essential to monitor modifications as critical quality attributes (CQAs) during both the production and storage of the drug. To ensure monitoring of CQA points, the primary structure of the protein is characterized based on peptide mapping (peptide mapping) analysis. The protein under study is subjected to proteolytic digestion using enzymes such as trypsin, chymotrypsin, Lys-C, Glu-C. As a result of various proteolytic enzymes, a wide range of peptides is obtained. Ultimately, coverage of the entire sequence of the protein under study is obtained.</p><figure class="image"><img style="aspect-ratio:1536/947;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Bioanalytic_Bioanalytic_Characteristics_of_monoclonal_antibodies_3_d94fa1623b.jpg" alt="Bioanalytic: Characteristics of monoclonal antibodies." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Bioanalytic_Bioanalytic_Characteristics_of_monoclonal_antibodies_3_d94fa1623b.jpg 245w," sizes="100vw" width="1536" height="947"></figure><p>At LabExperts, proteomic analyses are performed on a <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?manufacturerItems=52&amp;search=ZenoTOF+7600"><strong>ZenoTOF 7600</strong></a> high-resolution LC-MS/MS system (SCIEX). For MS/MS analyses, we use Collision induced dissociation (CID) and Electron-Activated Dissociation (EAD) fragmentation. This provides us with data for unambiguous identification of protein-building amino acids. We process the results using Sciex OS, Skyline and Spectronaut software.</p><blockquote><p><span style="font-size:22px;"><strong>We perform:</strong></span></p><ul><li>Whole protein analyses - Intact - to determine the exact mass and confirm the theoretical mass;</li><li>N-glycosylation profile determination (based on MS spectrum reconstruction):<ul><li>Glycosylated form;</li><li>Deglycosylated;</li><li>Glycosylated with reduced disulfide bridges;</li><li>Deglycosylated with reduced disulfide bridges.</li></ul></li><li>Peptide maps:<ul><li>Protein digestion with various proteases so that sequence coverage is close to 100%<ul><li>Analysis of PTMs:</li><li>Location of modifications</li></ul></li><li>[%] of modifications compared to the unmodified sequence</li></ul></li><li>TiPOS testing - (technical proof of similarity) - technical confirmation of the similarity of the protein synthesized by the customer (from several LOTs) with the target protein (provided as a template).</li></ul><p>In order to maintain the highest possible analytical standards, we perform monoclonal antibody analyses under the regime of an internally developed and implemented laboratory quality system based on GLP principles.</p><p>See also our other proteomics services: <a target="_blank" rel="noopener noreferrer" href="https://labexperts.com.pl/service/identyfikacja-bialek/"><strong>Protein identification</strong></a>, <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1294"><strong>Protein quantitative analysis</strong></a></p></blockquote><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Bioanalytic_Bioanalytic_Characteristics_of_monoclonal_antibodies_2_cb93143fe6.jpg" alt="Bioanalytic: Bioanalytic Characteristics of monoclonal antibodies." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Bioanalytic_Bioanalytic_Characteristics_of_monoclonal_antibodies_2_cb93143fe6.jpg 245w," sizes="100vw" width="1536" height="908"></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Bioanalytic_Bioanalytic_Characteristics_of_monoclonal_antibodies_1_0e8ab7cdfa.jpg" alt="Bioanalytic: Bioanalytic Characteristics of monoclonal antibodies." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Bioanalytic_Bioanalytic_Characteristics_of_monoclonal_antibodies_1_0e8ab7cdfa.jpg 245w," sizes="100vw" width="1536" height="858"></p>

Products from category Analyzers distributed by Bioanalytic - page 1

Related content

How Bitter Acid Analysis Helps Brewers Better Control Beer Flavors

Interlaboratory comparisons other than proficiency testing

Webinars LabRulezLCMS Week 27/2026