<div>A new study reveals that over the past decade, urinary levels of Bisphenol A (BPA) in the Czech population have dropped significantly, while its substitute Bisphenol S (BPS) has increased. Despite this shift, BPA remains the dominant bisphenol, with concentrations exceeding safe limits — confirming that everyday exposure still poses health risks. The study was led by our research group at RECETOX, in collaboration with partners from the National Institute of Public Health (NIPH Prague).&nbsp;&nbsp;<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/RECETOX_MUNI_BPA_free_is_not_risk_free_Czech_study_shows_BPA_declines_but_BPS_is_partly_replacing_it_cb7567a37a.jpg" alt="RECETOX MUNI: “BPA-free” is not risk-free: Czech study shows BPA declines, but BPS is partly replacing it: Temporal patterns of bisphenol exposure in the Czech population within the framework of regulatory measures." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_RECETOX_MUNI_BPA_free_is_not_risk_free_Czech_study_shows_BPA_declines_but_BPS_is_partly_replacing_it_cb7567a37a.jpg 245w," sizes="100vw" width="572" height="339">“We found that over roughly a decade (2011–2012 vs. 2019–2020), urinary levels of Bisphenol A (BPA) in the Czech population dropped substantially — by 28.6 % in adults and 47.5 % in children — while levels of its substitute Bisphenol S (BPS) increased (121.1 % in adults, 90.0 % in children). We suggest this simultaneous decline in BPA and rise in BPS likely reflect manufacturers’ shift to BPA-free alternatives in response to regulation,” explains the main author of the study Daria Sapunova.&nbsp;Despite legislative measures, BPA still remains the dominant bisphenol in the Czech population, occurring at the highest concentrations and at the levels significantly higher than its substitutes BPS and Bisphenol F (BPF). Moreover, BPA levels in all age groups remain higher than what health experts consider safe, suggesting that everyday sources of exposure are still present around us and continue to pose risks.&nbsp;&nbsp;“Our results highlight the need for policymakers to regulate bisphenols as a group and prevent harmful substitutions like the shift from BPA to BPS and BPF, supported by continuous human biomonitoring. BPA is a well-known endocrine-disrupting chemical widely used in plastics and food packaging, with potential risks to human health. Endocrine-disrupting chemicals can interfere with our hormonal system and disturb its proper functioning,” adds Daria Sapunova.&nbsp;Studies link BPA exposure to altered puberty timing, reduced fertility changes in sperm quality. Additionally, BPA is associated with a higher risk of obesity and type 2 diabetes, likely due to its effects on metabolic regulation. Children and pregnant women are considered particularly vulnerable, and exposure during embryonic development can lead to irreversible changes later in life. Some studies also show associations between BPA exposure and changes in brain development, behavior, attention, and stress responses in children.&nbsp;&nbsp;“Despite bans and restrictions of BPA, our findings show that people — particularly children — remain exposed. The rise in BPS levels is worrisome because BPS was originally introduced as a safer alternative, but toxicological studies suggests it can poses similar health risks. Although the Czech population is still exposed to these harmful chemicals, legislative measures targeting BPA are effective and we should continue in this direction. In the case of children, we managed to reduce BPA concentrations by about half in a decade,” says Daria Sapunova.&nbsp; The researchers analyzed first-morning urine samples from over 1,000 individuals sampled in two separate Czech cohorts: DEMOCOPHES-CZ mother–child pairs (2011–2012), and CELSPAC (2019–2020) covering school children, teenagers and young adults. Using accredited laboratory methods, they quantified total urinary concentrations of BPA, BPS, and BPF. They then examined how bisphenol levels differed over time and whether they were influenced by factors such as age, gender, smoking habits, or the season during which samples were collected. To evaluate potential health risks, the researchers compared all measured BPA concentrations with established health-based guidance values to determine whether different age groups exceeded safe exposure levels. &nbsp; Authors thank all collaborating field workers, laboratory and administrative personnel, and especially the cohort participants who invested their time and provided samples and information for this study. The team thanks also the Research Infrastructure RECETOX RI (No. LM2023069) for a supportive background. The study was supported from the European Union's Horizon 2020 research No. 857560 (CETOCOEN Excellence) and from the Horizon Europe programme under grant agreement No. 101057014 (PARC). Also supported by the European Commission through the LIFE+ programme under grant agreement LIFE09 ENV/BE/000410. There are no particular limitations on communication arising from the funding.&nbsp;<blockquote>Learn more: <a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1186/s12302-025-01244-0">https://doi.org/10.1186/s12302-025-01244-0&nbsp;</a></blockquote></div>

“BPA-free” is not risk-free: Czech study shows BPA declines, but BPS is partly replacing it

When performing analyte extraction with <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products?category=136&amp;manufacturerItems=50">SPE</a> we expect 100% recovery. If recovery is lower, this would suggest there is an issue with retrieval of the analyte from the sorbent. But what are some of the reasons you may see a recovery greater than what you were expecting (or over 100%)?<h3>Common problems</h3><ul><li>Co-eluting interferences</li><li>Contaminants from the solvent or sorbents selected</li><li>Internal standard is compromised making your reference point inaccurate</li><li>Recovery calculations are inaccurate</li></ul>Let's examine each of these common problems.<h4>Co-eluting interferences</h4>These are typically present in the matrix and the goal of the SPE step is to remove them. If you are experiencing recoveries greater than 100%, the first step would be to check the eluent using an orthogonal analytical technique to identify that the increased recovery is a result of a co-elution.&nbsp;Where a co-elution is identified, there are a few possible solutions.<ol><li>Modify the wash steps of the SPE method to selectively remove the impurity during washing</li><li>Select an alternative SPE sorbent which will better remove these impurities. This is easier if the analyte / impurity can be selectively ionized, as an ion-exchange sorbent will very often afford cleaner extracts than either reversed or normal phase solutions</li><li>Adjust your analytical method to resolve the 2 peaks analytically, negating the necessity to remove this impurity during the SPE step.</li><li>Run a blank plasma sample; this will allow you to ascertain the impurities present and use this blank in the calculations to subtract from your recovery</li></ol><h4>Contaminants from the solvent or sorbent</h4>These will typically be impurities present in the starting materials which are similar in nature to your compound of interest, and as a result co-elute with it during SPE and subsequent analytical analysis. You can follow the steps above to remove co-eluting impurities, or alternatively as this is not an impurity present in your matrix, you can identify the level present in the sorbent using blank runs and subtract this from your main peak during the calculation. Prior to addition of your sample if you equilibrate your sorbent with the elution solvent this should flush out potential contaminants from the sorbent. For impurities introduced from the solvent, typically switching the solvent should resolve this.<h4>Internal standard is compromised</h4>If your internal standard is not showing 100% recovery, your subsequent calculations will be inaccurate. It is always good practice to use an internal standard similar in nature to your compound of interest as this will give the more consistent reference point for your method.&nbsp;If there is concern your internal standard is not showing good recovery from the SPE material using your method, you can use an external standard which is added to the elution solvent to calculate absolute recovery.<h4>Recovery calculations are inaccurate</h4>It is important to follow this step wise to ascertain where the errors are appearing.<ol><li>Calculation Errors - Check all calculations and account for all dilution factors</li><li>Integration Errors - Reintegrate all peaks and use manual calculations to confirm</li><li>Analytical method errors – Ensure the analytical method used allows correct integration and calculation. Ensure no strong solvents are used for injection and run a calibration across a number of dilutions to ensure linearity. Troubleshoot your analytical method to determine any factors which may lead to poor reproducibility</li><li>Ensure detections selected are appropriate and working correctly.</li></ol>We hope this tip was useful! Check out our resources on <a target="_blank" rel="noopener noreferrer" href="https://www.phenomenex.com/techniques/solid-phase-extraction">solid phase extraction</a>. See you next month for another tip!

Why are my recoveries greater than 100%?

Our Library never stops expanding. What are the most recent contributions to LabRulezLCMS Library in the week of 19th January 2026? Check out new documents from the field of liquid phase, especially HPLC and LC/MS techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT LCMS AND RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">LabRulezGCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">LabRulezICPMS</a> libraries.</blockquote>This week we bring you application notes by Agilent Technologies, Shimadzu, Waters Corporation and poster by Thermo Fisher Scientific!<h3>1. Agilent Technologies: Automated Bioprocess Monitoring with Agilent 1290 Infinity III Bio Online LC Solutions</h3>Process analytics of L-alanine production using genetically modified Vibrio natriegens<ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_automated_bioprocess_monitoring_1290_infinity_bioonline_solutions_5994_8865en_agilent_9f33de6ddf.pdf">Full PDF for download</a></li></ul>Bioprocess engineering is a challenging field because of the constantly changing nature of bioprocess models which make them difficult to validate.1 Consequently, process control needs to be developed at various levels using strategies tailored to these specific requirements.1 The performance and effectiveness of the bioreactor are determined by key performance indicators such as product yield, titer, production rate, and quality of the product.1 These factors can be quickly influenced by changes in process variables and the raw materials used.1,2 The ability to react quickly to problems is therefore crucial for preserving ongoing production, a factor that can be particularly significant in bioprocesses due to the substantial cost and time investmented.1,2 Such challenges can be tackled by constantly monitoring the bioprocess, which requires the ability to analyze and collect data quickly. Therefore, monitoring is of the utmost importance.&nbsp;This application note describes the advantages of using an Agilent 1290 Infinity III Bio Online LC solution with Agilent Online LC Monitoring software. A bioreactor was interfaced with a Flownamics Seg-Flow S3 sampling system for aseptic withdrawal and an Agilent 1290 Infinity III Bio Online LC to make an hourly analysis.&nbsp;This is a fully automated approach for taking sterile samples from a bioreactor and preparing or diluting them. In addition, the 1290 Infinity III Bio Online LC solution displays data in near real time, which is a crucial element for effective bioprocess&nbsp;monitoring.<h4>Experimental&nbsp;</h4><h5>Equipment&nbsp;</h5>The <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=1290+Infinity+III+Bio">1290 Infinity III Bio </a>Online LC comprised the following&nbsp;modules:&nbsp;<ul><li>Agilent 1290 Infinity III Bio Flexible Pump (G7131A) with an InfinityLab Quick Change Bio inline filter assembly (part&nbsp;number 5067-1607), 2.1 mm id, 0.2 µm pore size&nbsp;</li><li>Agilent 1290 Infinity III Bio Online Sample Manager (G3167B) with Sample Thermostat (option #101) clustered with Agilent 1290 Infinity Valve Drive (G1170A), featuring a reactor valve pod (part number 5067-6680) and Online LC Monitoring Software&nbsp;</li><li>Agilent 1290 Infinity III Multicolumn Thermostat (G7116B) equipped with an Agilent Quick Connect Bio Heat Exchanger Std. (G7116-60071)&nbsp;</li><li>Agilent 1290 Infinity III Diode Array Detector (DAD) (G7117B), equipped with a Bio Max-Light Cartridge Cell (G4212-6008), 10 mm, 1 µL&nbsp;</li><li>Agilent 1260 Infinity High-Performance Degasser (G4225A) is connected between S1 (transport solvent) solvent line and Agilent 1290 Infinity III Bio Online Sample Manager (G3167B)&nbsp;</li></ul><h5>Software&nbsp;</h5><ul><li>Agilent <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=OpenLab+CDS">OpenLab CDS</a> version 2.8 or later versions&nbsp;</li><li>Agilent Online LC Monitoring Software version 1.3 or later&nbsp;versions&nbsp;</li><li>Flownamics FlowWeb control&nbsp;software</li></ul><h5>Instrumental configuration&nbsp;</h5>The 1290 Infinity III Bio Online LC solution was used with a Seg-Flow interface for automatic sampling and online analysis (see Figure 1). The Seg-Flow interface was used to withdraw samples from a bioreactor through a Flownamics F-Series 310 FISP probe with a ceramic membrane filter (0.2&nbsp;µm pore size) from a 5 L bioreactor. The drawn samples were sent through the built-in sample collection cup on the Seg‑Flow to the LC and the samples were retained into vials. The collected samples were then automatically derivatized by using an injector program and subsequently analyzed. A more detailed description of the instrumental configuration has been published.3<h4>Conclusion&nbsp;</h4>For online bioprocess monitoring, a fully automated setup consisting of a bioreactor, a Flownamics sampling system, and an Agilent 1290 Infinity III Bio Online LC solution was successfully established. This setup is capable of taking aseptic samples from a bioreactor, preparing, analyzing, and processing samples without the need for manual interaction. In addition, the added value of the Agilent Online LC Monitoring software was evident in the display method and the ability to track it quickly.<h3>2. Shimadzu: Analysis of Oligonucleotide Impurities Using Single Quadrupole Mass Spectrometer</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_01_00974_en_c50bb67c7a.pdf">Full PDF for download</a></li></ul><h4>User Benefits</h4><ul><li>Combination use of LCMS-2050 single quadrupole mass spectrometer and LabSolutions Insight Biologics provides comprehensive characterization of oligonucleotides and related impurities.</li><li>Purity calculations for target components can be performed even on poorly separated peaks by utilizing MS spectra simultaneously acquired with UV chromatogram.</li></ul>In recent years, oligonucleotide therapeutics have been paid attention as a novel drug discovery modality because of their rapid progress of development. During the synthesis of oligonucleotide therapeutics, impurities that have differing base chain lengths are generated along with the target oligonucleotide. To ensure the safety and efficacy of the drug, comprehensive detection and identification of these impurities are required.&nbsp;Reversed phase ion-pair chromatography is often employed as a method to separate the target compound from co-existing impurities. However, it is often difficult to establish analytical conditions that provide compete separation of all impurities that are formed in synthesis process due to their similar structures and properties to the principal compound of active ingredient. Against this drawback, liquid chromatography-mass spectrometry (LC-MS) is commonly used for impurity detection and identification. For analysis of oligonucleotide impurities, quadrupole time-of-flight mass spectrometers are mainly used because of their high mass resolution and ability to perform sequence and structure estimations via MS/MS analysis. However, in quality control process, the use of a single quadrupole mass spectrometer is expected to be advantageous because of providing mass information with easy operation when impurity information is already known.&nbsp;This article presents a simulated impurity analysis of synthetic oligonucleotide using the LCMS-2050 high-performance liquid chromatography-mass spectrometer and LabSolutions Insight Biologics.<h4>Analytical conditions</h4>The employed instrument setup was <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=1&amp;search=Nexera+XS">Nexera XS inert</a> and <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=1&amp;search=LCMS-2050">LCMS-2050</a>. HPLC conditions are shown in Table 2, and MS conditions are shown in Table 3. The conditions were set where n-1(5') co-eluted with FLP, while n-3(5') was separated (Fig. 1) to demonstrate impurity analysis performance.<h4>Conclusion</h4>The simulated sample consisting of mainly FLP and small amounts of n-1(5')/n-3(5') was analyzed using the LCMS-2050 and LabSolutions Insight Biologics software and obtained data were processed appropriately. Detection, identification, and quantitation at low concentrations were accomplished not only for n-3(5') well-separated from FLP but also for n-1(5') co-eluted with FLP. In case that establishing analytical conditions is difficult, Using this instrument setup and software will provide efficient quality confirmation of oligonucleotide therapeutics.<h3>3. Thermo Fisher Scientific: Simultaneous Quantitation and Untargeted Discovery (SQUAD) workflow using multiple fragmentation techniques for quantitation and characterization of trace level nitrosamine in biological matrices</h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/po_squad_workflow_multiple_fragmentation_techniques_po_en_94a5b27b12.pdf">Full PDF for download</a></li></ul>N-Nitrosamines are a class of carcinogenic chemical compounds that pose threat to humans exogenously through matrices like drinking water, food, cosmetics, and endogenously by nitrosation in gastrointestinal tract, nitrate to nitrite conversion, etc. An accurate, reliable analytical method is critical for detection and quantification of these trace-level, polar and low molecular weight compounds to understand the association between their exposure and related diseases.&nbsp;An optimized SQUAD workflow is presented that discovers unknown compounds in the matrix by using high resolution orbitrap and a sensitive linear ion trap detector that quantifies the low intensity nitrosamines in a single run. The workflow uses multiple fragmentation types – HCD, CID and UVPD and MSn to help characterize isomeric structures.<h4>Methods</h4>Serial dilution of Nitrosamine standards were subjected to Simultaneous Quantitation and Discovery (SQUAD) analysis using <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/744">Thermo Scientific™ Vanquish™ Horizon UHPLC system</a> and the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/561">Thermo Scientific™ Orbitrap IQ-X™ Tribrid™ mass spectrometer</a> . Nitrosamine spiked matrices of human pooled urine and human Serum were subjected to SQUAD analysis.<h4>Data Analysis&nbsp;</h4>Spectra were evaluated for nitrosamines using Thermo Scientific™ FreeStyle™ software and annotated using Thermo Scientific™ <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1757">Mass Frontier™ 8.0 software</a>. Untargeted data analysis was performed using <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1759">Compound Discoverer 3.4 software</a>. Calibration curves were generated using Thermo Scientific™ <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/77">TraceFinder™ 5.2 software</a>.<h4>Conclusions&nbsp;</h4><ul><li>Detection limits as low ppb levels ( 0.2 ppb –0.5 ppb) and quantitation limits (0.2 ppb- 5 ppb ) in presence of the matrix were achieved for all seven nitrosamines by applying parallel ion trap analysis&nbsp;</li><li>SQUAD analysis was run on Orbitrap IQ-X Tribrid MS and achieved low ppb level quantitation in ion trap and identified unknown compounds through discovery analysis in Orbitrap.&nbsp;</li><li>Employing nano LC helped achieve lower limit of quantitation (5 ppt)</li></ul><h3>4. Waters Corporation: Validated LC-MS/MS Method for Vitamin E Acetate in Cannabis Plants and Derived Products</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/720009082_en_c7a6fc6190.pdf">Full PDF for download</a></li></ul><h5>Benefits&nbsp;</h5><ul><li>The validated LC-MS/MS method provides high sensitivity and specificity for VEA quantification in complex cannabis matrices, including flower and concentrates.&nbsp;</li><li>Minimal sample preparation reduces handling time and improves laboratory throughput, supporting efficient routine analysis.&nbsp;</li><li>The method demonstrates robust performance across multiple matrices, ensuring reliable detection even in lipid-rich, chemically diverse samples.</li><li>Use of Waters ACQUITY UPLC H-Class System and Xevo TQ-S micro Mass Spectrometer enables accurate quantitation well below regulatory requirements.&nbsp;</li><li>The validated method complies with Missouri DCR and DHSS regulatory limits, enabling laboratories to confidently monitor VEA in cannabis products.</li></ul>VEA is used as a diluent and viscosity modifier in certain cannabis-derived products, including vaping formulations. Following increased public health awareness during 2019, VEA became a marker of interest for quality control and regulatory surveillance across cannabis supply chains due to its potential impact on lung health. In addition to concentrates and vape liquids, trace residues may be present in infused products and processing intermediates. Therefore, reliable quantification of VEA in these chemically diverse, lipid-rich matrices requires an analytical method that is sensitive, selective, and robust against matrix effects. In February 2024, Missouri’s DCR revised the tolerance limit for VEA in cannabis products from 0.2 ppm to 5 ppm.1&nbsp;Liquid chromatography coupled with tandem quadrupole mass spectrometry (LC-MS/MS) provides the sensitivity and specificity required to distinguish VEA from endogenous cannabinoids, terpenes, and other lipophilic excipients, while also offering the sensitivity to support low-ppm and sub-ppm action limits. Unlike UVbased methods, where co-eluting chromophores may interfere, LC-MS/MS enables targeted multiple reaction monitoring (MRM) for confident identification and accurate quantitation in complex cannabis matrices.&nbsp;This application note describes the validation of an LC-MS/MS method for the quantitation of VEA in two inhalable products, cannabis flower and cannabis concentrates. The method was developed and validated using the Waters ACQUITY UPLC H-Class System coupled with a Xevo TQ-S micro Triple Quadrupole Mass Spectrometer. Chromatographic separation was achieved with a reversed-phase ACQUITY UPLC BEH C18 Column. A streamlined sample preparation approach was applied for cannabis flowers and concentrates, which minimizes handling time and increases sample throughput.&nbsp;The validation study was conducted at GPA. Method performance was evaluated for calibration range, linearity, LOD, LOQ, accuracy, precision, recovery, repeatability, and robustness. The results of these are evaluated against acceptance criteria set by State of Missouri DHSS and presented in this application note.<h4>Experimental&nbsp;</h4><ul><li>LC system: <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/198">ACQUITY UPLC H-Class Plus System&nbsp;</a></li><li>MS detection: <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/209">Xevo TQ-S micro Mass Spectrometer&nbsp;</a></li><li>Column: <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1952">ACQUITY UPLC BEH C18 Column</a>, 2.1 x 50 mm, 1.7 µm (p/n: 186002350)</li><li>Software: <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/635">MassLynx™ 4.1 Software&nbsp;</a></li><li>Data processing: <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=5&amp;search=TargetLynx">TargetLynx™</a> Application</li></ul><h4>Conclusion&nbsp;</h4>The LC-MS/MS method developed and validated for VEA quantification in cannabis flower and concentrates demonstrates excellent linearity, accuracy, precision, and robustness, and meets the regulatory requirements. Calibration curves achieved R² values greater than 0.999, with LOD and LOQ well below the Missouri action limit of 5 ppm. Matrix-spiked recoveries across flower and concentrate samples were within the 70–130% acceptance range, and QC samples met all performance criteria, confirming method reliability. Robustness testing across analysts and matrices further validated the method’s reproducibility. Overall, this approach provides a streamlined, sensitive, and regulatory-compliant workflow for laboratories, enabling accurate monitoring of VEA to support quality control, consumer safety, and regulatory compliance in cannabis-derived products

News from LabRulezLCMS Library - Week 04, 2026

Article

Application

Academy

Health

Science and research

Poster

RECETOX (Research Centre for Toxic Compounds in the Environment) is an independent department of the Faculty of Science of Masaryk University in Brno, which has been established in 1983. RECETOX is focused on the research and education in cross-cutting area of Environment and Health. It addresses interactions among chemicals, environment, and biological systems, including consequences at local, regional, and global levels.

RECETOX - Centrum pro výzkum toxických látek v prostředí

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Phenomenex is a global technology leader committed to developing novel analytical chemistry solutions that solve the separation and purification challenges of researchers in industrial, government and academic laboratories.

Phenomenex

SIELC Alltesta Mini HPLC Autosampler

The Alltesta™ Mini Autosampler is an affordable and dependable solution for automated sample handling in various analytical and liquid handling applications, including HPLC.

The Alltesta™ Mini Autosampler is an affordable and dependable solution for automated sample handling in various analytical and liquid handling applications, including HPLC. With its proprietary alpha/beta mechanical design, this compact autosampler offers direct and comprehensive control of its features, making integration quick and easy. Users can tailor the mini autosampler to their needs with customizable valve configurations, tray designs, and syringe volumes and pressures. Additionally, a built-in shaking feature enables sample mixing before injection and/or simple sample extraction within the vial.
This compact autosampler comes designed with original equipment manufacturer (OEM) customization in mind. Custom shape, color, and communication interfaces can be adapted to integrate with any system. Comprehensive software integration support is provided. Other options include metal-free sampling and reagent addition and mixing capabilities.
<ul>
<li>FRACTION COLLECTION CAPABILITY: A simple software modification can quickly convert this small autosampler into a fraction collector.
</li>
<li>REACTOR PROBE SAMPLER CAPABILITY: A simple software modification can quickly convert this small autosampler into a reactor probe sampler.
</li>
</ul>
This miniature autosampler can also be used as a component of our <a href="https://lcms.labrulez.com/products/1242">Alltesta™ Gradient Automated Analyzer</a> and <a href="https://lcms.labrulez.com/products/1243">Alltesta™ Cromite Analyzer</a>.
<blockquote>
<h4>The price of the Alltesta™ Mini Autosampler varies depending on the specific configuration requested.</h4>
</blockquote>
<h4>Specifications</h4>
<ul>
<li>Dimensions (WHL): 160 x 145 x 195 mm / 6.3 x 5.71 x 7.68 in</li>
<li>Weight: 3 kg / 6.6 lb</li>
<li>Power: 24 V</li>
<li>Capacity: 48 vials or 96-well plate</li>
<li>Pressure: 5000 psi</li>
<li>Needle Wash: Inside and outside</li>
<li>Syringe Capacity: 120µL high-pressure / 4000µL low-pressure stainless / 4000µL low-pressure ceramic</li>
<li>Valve options: 6×2, 7×6 and 10×9 (more details here).</li>
<li>Volume Accuracy: 0.1µL</li>
<li>Communication: RS232 Virtual COM port via USB</li>
</ul>
<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/SIELC_Alltesta_Mini_Autosampler_A_very_simple_schematic_operation_of_the_Alltesta_Autosampler_b79b0ad187.jpg" alt="SIELC: Alltesta™ Mini Autosampler - A very simple schematic operation of the Alltesta™ Autosampler."/>
<h4>Software</h4>
The Alltesta™ Autosampler can be controlled:
<ul>
<li>directly via serial commands (Alltesta™ protocol available upon request, please contact us at support@sielc.com),</li>
<li>directly via our demo software, allowing to learn the whole functionality of the unit (<a href="https://sielc.com/wp-content/uploads/2022/12/Alltesta_Autosampler_Control_Windows_10.zip">Windows 10, 32/64bit</a>, 5Mb; <a href="https://sielc.com/wp-content/uploads/2022/12/Alltesta_Autosampler_Control_Windows_7.zip">Windows 7, 32/64bit</a>, 126Mb).</li>
<li>remotely through our cloud software (as a part of Alltesta™ Analyzer or Alltesta™ Mini Analyzer),</li>
</ul>
Serial communication drivers are available <a href="https://ftdichip.com/drivers/vcp-drivers/">here</a>.

SIELC Alltesta™ Mini LHS (Liquid Handling Station)

The Alltesta™ Mini Liquid Handling Station serves as an affordable, reliable solution for automated sample handling.

The Alltesta™ Mini Liquid Handling Station serves as an affordable, reliable solution for automated sample handling. With its compact design, proprietary alpha/beta mechanical structure, and adjustable operation speeds, it offers comprehensive control for quick and seamless integration with other equipment. The station comes equipped with a built-in sample shaking feature for in-vial sample mixing and extraction, and a needle washing station capable of accommodating up to four solvents.
Designed with Original Equipment Manufacturer (OEM) customization in mind, the Alltesta™ Mini Liquid Handling Station can be tailored to fit any system’s requirements. Custom needle lengths and trays enable the device to accommodate various types of vials. An array of integrated valves and a measuring syringe can be added to the device. Additional customization options, such as metal-free flow paths and customer-specified enclosure colors, are also available.
Comprehensive software integration support is provided to ensure smooth operation and functionality.
<h4>Specifications</h4>
<ul>
<li>Dimensions (WHL): 160 x 145 x 195 mm / 6.3 x 5.71 x 7.68 in</li>
<li>Weight: 2.25 kg / 5 lb</li>
<li>Power: 24 V</li>
<li>Capacity: 48-vial tray or 96-well plate</li>
<li>Needle Wash: Inside and Outside</li>
<li>Communication: RS232 Virtual COM port via USB</li>
</ul>
<h4>Software</h4>
The Alltesta™ LHS can be fully controlled via serial commands. Alltesta™ protocol available upon request, please contact us at support@sielc.com. Serial communication drivers are available <a href="https://ftdichip.com/drivers/vcp-drivers/">here</a>.

SIELC Samplify Automated sampling system

Samplify Is a device which allows unattended sampling of a reaction mixture or bioprocess or continue in line flow by taking small amount of liquid from the monitoring mixture and collecting it in a vial or a 96 wells plate

Samplify™ Is a device which allows unattended sampling of a reaction mixture or bioprocess or continue in line flow by taking small amount of liquid from the monitoring mixture and collecting it in a vial or a 96 wells plate. It also allows to dilute the sample with assigned dilution ratio and can provide reaction quenching to preserve the sample state at time of sampling. It has two main components: an autosampler and a probe. The Samplify™ &nbsp;controlled and setup by a PC software.<h3>Description</h3>It is a common task in the lab to periodically sample a reactor or a fermenter to obtain information about reaction kinetic, completion and have a tangible representation of intermediate states of a dynamic process. This usually done manually with pipettes or syringes, using stopwatch to measure time and requires to be in the lab during the entire process.With Samplify it can be done in automated mode. When an automated sampling process is used it increases accuracy, safety, and productivity. It reduces potential samples cross contamination, and exposure of the reaction mixture to oxygen or moisture, when anaerobic or moisture free conditions are required.<ul><li>Based on a proprietary alpha/beta mechanical configuration, Alltesta Miniature Autosampler and patent pending sample probe offers affordable and reliable automation for many analytical and liquid-handling applications.&nbsp;</li><li>Small controllable volume of sample can be programmed and precisely removed from the enclosed or open system. The sample will then be transferred to a vial with inert solvent with measured volume to create a controllable dilution factor.</li><li>A quench solution can be automatically preloaded in each vial to provide termination of reaction or biological process, and preserve sample content in the time of probing.</li><li>In order to effectively mix samples with diluents or quenching reagents a shaking capability of the autosampler tray can be initiated after each sample cycle.</li><li>PC based software allows quick, but flexible, setup of the sampling experiment. Several preloaded methods can be quickly adapted to a particular needs of the user.</li><li>For temperature sensitive samples the entire autosampler can be placed in the temperature controlled environment.</li><li>The device small size allow to place it close to the reactor and use short connection lines to minimize dispersion. Also a small cooler can be used to keep samples in cold conditions after they are collected.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/SIELC_SIELC_Samplify_Automated_sampling_system_937b70e8d2.jpg" alt="SIELC: SIELC Samplify™ Automated sampling system." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_SIELC_SIELC_Samplify_Automated_sampling_system_937b70e8d2.jpg 245w," sizes="100vw" width="1346" height="663"><h3>Specifications</h3><h4>Samplify™ Autosampler:</h4><ul><li>Syringe volume: 4.0 mL</li><li>Pressure: up to 250 psi</li><li>Valve configuration: 7×6</li><li>Power Requirements: 24 VDC</li><li>Current Requirements: Up to 1.0 A</li><li>Dimensions (WHL): 160 x 145 x 195 mm / 6.3 x 5.71 x 7.68 in</li><li>Weight: &nbsp;3 kg / 6.6 lb</li><li>Inlets/Outlets: Thread 10-32 UNF compression type</li><li>Materials in contact with liquid: SS316, PTFE, PEEK</li><li>Tray capacity: 48 vials 1.8 mL volume or 96 wells plate</li><li>Communication: USB virtual serial port</li></ul><h4>Samplify™ Probe:</h4><ul><li>Connection: requires Alltesta-Samplify autosampler</li><li>Dimensions: 1 x 1 inch, DIA ¼ inch. Immersion length up to 6 inch</li><li>Materials in contact with liquid: Stainless Steel 316 (316L), PEEK &amp; PTFE</li><li>Variable sample volume: from 5 to 500 µL</li><li>Max. working pressure: 120 psi (8 bar)</li><li>Max. working temperature: &nbsp;200 °C</li></ul><h3>Software</h3>The Samplify can be controlled:<ul><li>directly through your software via serial commands (Alltesta™ protocol available upon request, please contact us at support@sielc.com),</li><li>remotely through our cloud software (autosampler.cloud),</li><li>directly via our Samplify PC software, allowing to fully control all the parameters of the sampling operations</li></ul><h3>Available Custom Options</h3>Metal-free version of the syringe pump includes no metal contact pump head.

PBI Barocycler 2320EXT Sample Preparation System

The Barocycler 2320EXT is a compact, bench top instrument that can process up to 16 samples simultaneously using PCT MicroTubes.

<h4>For the PCT-HD Sample Preparation System</h4>Pressure Cycling Technology (PCT) is a unique, patented technology platform based on repeated cycles of hydrostatic pressure between ambient (14.7 psi) and ultra-high levels. These rapid changes in pressure are used to control biomolecular interactions for applications such as accelerated proteolytic digestion, and improved extraction of cellular components, including proteins and lipids. The PCT platform allows for a high degree of safety, speed, reproducibility, and convenience in modern sample preparation protocols.The PCT-HD Sample Preparation System is a proven PCT-based workflow for processing small tissue samples for proteomic and other applications. PCT-HD combines efficient, hands-off tissue homogenization and protein extraction with pressure-enhanced digestion, for rapid, efficient and reproducible generation of peptides for MS analysis. This unique workflow combines two of PBI’s innovative sample preparation tools: the Barocycler 2320EXT and our patentpending PCT MicroPestles. PCT-HD and the Barocycler 2320EXT can provide unprecedented speed and reproducibility for biomarker discovery, yielding peptides ready for clean-up and MS within 2-4 hours from the start of tissue processing.The Barocycler 2320EXT is a compact, bench top instrument that can process up to 16 samples simultaneously using PCT MicroTubes. Features that come standard with the 2320EXT include: data input and output options to accommodate validation and quality control; computer-operated control with touch screen programming and automatic data logging; and the ability to control multiple pressure cycling parameters, such as the rate of pressure increase/decrease, both the high and low pressure levels, and the shape of the pressure profile (e.g., sine wave, square wave, and others). In addition, the 2320EXT is available with a choice of two different methods for temperature control (an external circulating waterbath for heating and cooling, or a built-in electric heater).<blockquote>Patent Pending</blockquote><h4>The Barocycler 2320EXT</h4><ul><li>Computer-operated control with Touch Screen Interface</li><li>Pressure Range: ambient - 45,000psi (310 MPa)</li><li>Choice of temperature control - heating/cooling or heating only</li><li>Max Temperature: 95˚C</li><li>Min Temperature: 4˚C with circulating waterbath, ambient with electric heating</li><li>Insulated closure for easier use at high temperatures</li><li>Chamber capacity: up to 16 samples in MicroTubes</li><li>Easily accessible USB port on front panel</li><li>Requires 110psi input air pressure</li><li>Input air pressure can be provided by an air compressor, house air or nitrogen lines, air or nitrogen tanks.</li><li>Pressure medium: Distilled Water</li></ul><h4>Touch Screen Interface</h4>Pressure Profiles are programmed via an onboard touch screen, which can be connected to a network. The instrument is also equipped with a USB port that can be used to connect a mouse or keyboard to the 2320EXT.<ul><li>Pressure Mode Settings: Barocycler, Ramp, Waveform</li><li>Cycled or Static Pressure</li><li>Network Enabled</li><li>Automatic Logging of All Run Parameters</li><li>Data Output&nbsp;</li><li>Save and Record Programs</li><li>Real-time pressure display graph shows pressure and temperature throughout the run</li><li>Touch Screen Temperature Control (with electric heating option only)</li></ul><h4>MicroTubes and MicroPestles</h4>The 2320EXT comes with a full MicroTube Adapter Kit, that includes the MicroTube Cartridges, Capper Tool, and other accessories that are required when using PCT MicroTubes in the 2320EXT. PCT μPestles, used in conjunction with PCT MicroTubes in the Barocycler, are designed for rapid, hands-off homogenization and extraction when working with minute amounts of solid tissue. PCT MicroTubes and MicroPestles are an integral part of the PCT-HD workflow.<ul><li>Process up to 3mg of solid tissue in 30uL of extraction reagent</li><li>Process as few as 5 x 104 cells</li><li>MicroTubes are constructed of non-wetting, low binding FEP plastic</li><li>MicroPestles are made from inert PTFE (Teflon)</li></ul>

Products from category Sample preparation automation distributed by Bioanalytic - page 1

Related content

News from LabRulezLCMS Library - Week 04, 2026

Why are my recoveries greater than 100%?

“BPA-free” is not risk-free: Czech study shows BPA declines, but BPS is partly replacing it