At the recent Thermo Fisher Scientific sponsored workshop at the MSACL 2025 conference in Montreal, Canada, Dr. Patrick Vanderboom from Mayo Clinic shared groundbreaking research into the use of extracellular vesicles (EVs) as potential biomarkers for neurodegenerative diseases such as ALS (Amyotrophic Lateral Sclerosis). His team’s work highlights not only the biological promise of EV-based biomarkers, but also the power of complementary mass spectrometry strategies, leveraging deep discovery on the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/836">Thermo Scientific Orbitrap Astral mass spectrometer</a> and highly sensitive, multiplexed targeted validation on the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1149">Thermo Scientific Stellar mass spectrometer</a>.&nbsp;Together, these approaches are redefining what is achievable in both discovery and validation proteomics.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Fisher_Scientific_Breaking_Sensitivity_Barriers_How_MS_is_Transforming_Biomarker_Discovery_for_ALS_and_Beyond_75c7fe8571.jpg" alt="Photo: Thermo Fisher Scientific: Breaking Sensitivity Barriers: How MS³ is Transforming Biomarker Discovery for ALS and Beyond" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Fisher_Scientific_Breaking_Sensitivity_Barriers_How_MS_is_Transforming_Biomarker_Discovery_for_ALS_and_Beyond_75c7fe8571.jpg 245w," sizes="100vw" width="1024" height="512"><h3>The challenge of sensitivity in biomarker discovery</h3>Detecting disease-relevant proteins from complex, low-abundance samples like cerebrospinal fluid (CSF) or plasma remains a formidable analytical challenge. Even with advanced LC-MS workflows, background noise and insufficient detection sensitivity can obscure critical peptide signals, limiting biomarker validation and reproducibility.Dr. Vanderboom’s team confronted this head-on while developing workflows to identify EV-based ALS-specific markers. Early targeted assays using traditional MS² approaches revealed promising candidates but struggled with low signal intensity and limited reproducibility, clear signs of hitting the sensitivity ceiling.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Fisher_Scientific_Breaking_Sensitivity_Barriers_How_MS_is_Transforming_Biomarker_Discovery_for_ALS_and_Beyond_2_6be7e53a18.jpg" alt="Thermo Fisher Scientific - Breaking Sensitivity Barriers - How MS³ is Transforming Biomarker Discovery for ALS and Beyond 2.jpg" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Fisher_Scientific_Breaking_Sensitivity_Barriers_How_MS_is_Transforming_Biomarker_Discovery_for_ALS_and_Beyond_2_6be7e53a18.jpg 208w," sizes="100vw" width="800" height="600"><h3>The MS³ advantage</h3>To overcome these challenges, the Mayo team (pictured above) explored targeted validation on the Stellar MS. Stellar displayed an increase in sensitivity while achieving a fast cycle time, allowing for more points across the peak and increased reproducibility. Several peptides suffered from interfering signal. For these targets, the team explored MS³ (multi-stage fragmentation). By introducing an additional fragmentation and isolation stage, MS³ effectively reduces background interference, producing cleaner spectra and allowing for lower limits of detection.In Vanderboom’s words:“You can see there’s quite a bit of noise in the background, but if you look at that same peptide when we acquired it with MS³, it just cleans up the background. It’s almost like high resolution.”The result? Peptides that were previously undetectable became measurable, enabling discrimination between ALS cases and controls with improved confidence and reproducibility.<h3>From discovery to clinical potential</h3>EVs are a promising new source of biomarkers, but several challenges have limited progress. By leveraging the Obitrap Astral for deep, unbiased discovery using fast DIA with narrow isolation windows, the team identified nearly 6,000 proteins from small EVs in CSF, an unprecedented level of coverage. This expansion in detectable proteome depth represents a critical step toward finding reliable biomarkers that can distinguish ALS from similar neurological conditions.Although state of the art discovery workflows allow for unprecedented depth, confirming targets identified on this platform can be difficult. This is where Stellar comes in. The ability to run highly multiplexed assays with extreme sensitivity, fast LC gradients, and MS³-enabled selectivity allows investigators to fully capitalize on even the most challenging candidate biomarkers.<h3>Conclusion</h3>The incorporation of MS³ workflows on Stellar marks a pivotal evolution in targeted proteomics. As Dr. Vanderboom’s work demonstrates, increasing selectivity while maintaining extreme sensitivity doesn’t just enhance data — it opens new analytical frontiers for diseases where early detection is vital. By combining robust EV isolation with advanced MS³ enabled methods, researchers are now poised to illuminate the molecular signatures of neurodegeneration with unprecedented clarity.Watch the full workshop recording: <a target="_blank" rel="noopener noreferrer" href="https://www.youtube.com/watch?v=lweW3JRr0Ow">Extracellular Vesicle Biomarkers for Neurodegenerative Disease</a><h3>Resources</h3><ul><li>Related blogs in this series → <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/article/7480">Accelerating Biomarker Discovery and Validation: From Discovery to Clinical Utility – AnalyteGuru</a></li><li>Other on-demand webinars featuring Stellar → <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/4735">Next-generation workflows for small molecule quantitation using the Thermo Scientific Stellar mass spectrometer</a></li><li>Promotions → <a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/content/lifetech/global/en/home/industrial/mass-spectrometry/mass-spectrometer-price-affordability-programs.html">Mass Spectrometer Affordability Programs | Thermo Fisher Scientific – US</a></li><li>Follow along <a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/content/lifetech/global/en/home/about-us/events/industrial/msacl-us.html">MSACL 2025</a> for more information on Thermo Fisher Scientific participation in MSACL 2026</li><li>Interested in speaking opportunities at future events? Contact <a href="mailto:ema.ruzic@thermofisher.com">Ema Ruzic</a></li></ul><blockquote>Visit us on&nbsp;<a target="_blank" rel="noopener noreferrer" href="https://www.linkedin.com/showcase/72003132/admin/dashboard/">LinkedIn:</a>&nbsp;#Stellar #MayoClinic #Biomarkers #MassSpectrometry</blockquote>

Breaking Sensitivity Barriers: How MS³ is Transforming Biomarker Discovery for ALS and Beyond

The new NIST26 release expands LC-MS/MS data processing with integrated chromatogram analysis and <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/2462">MS/MS library searching</a>. Within the Chromatogram Window, users can load LC-MS/MS data, configure processing parameters, search spectral libraries, filter results, review identified components, and export selected results for further evaluation.This practical guide is based on James Little’s Processing MS/MS Data in NIST26 Chromatogram Window material from Mass Spec Interpretation Services. It walks through the fundamental workflow for processing MS/MS data in the NIST26 Chromatogram Window, from selecting the appropriate processing mode and input file to library searching, reviewing candidate identifications, and exporting results.<blockquote>👉<a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/Processing_MSMS_Data_in_Chromatogram_Window_NIST_26_09aa3c2996.pdf">Download PDF handout here</a></blockquote><h3>Before You Begin: Navigating the Chromatogram Window</h3>The workflow assumes that users are already familiar with configuring and navigating the NIST26 Chromatogram Window. For new users, the author recommends first reviewing the separate material dedicated to configuring and navigating this environment.NIST26 also provides extensive integrated help. Pressing F1 while working in the Chromatogram Window opens documentation and practical tips for processing tandem MS data. The presentation emphasizes that this help resource contains useful information for understanding individual functions and settings.<h4>1. Set Processing to Tandem Mode</h4>If both EI and tandem NIST software are installed, the first useful step is to specify the type of spectra being processed.<blockquote>In the Chromatogram Window, select: File → Select Spectrum Type → Tandem</blockquote>Selecting Tandem mode simplifies menu navigation and ensures that functions relevant to MS/MS data processing are readily available.<h4>2. Prepare Your Data in mzML Format</h4>For the workflow described in the presentation, NIST26 processes mzML files. Data stored in proprietary instrument formats therefore need to be converted before processing.The presentation recommends using ProteoWizard/msconvert for file conversion.<blockquote>Once the mzML file is available, processing can be started through: File → Analyze MS/MS Input File</blockquote>Select the appropriate mzML file and configure the required processing parameters.<h4>3. Set the Mass Tolerance</h4>Mass tolerance is one of the important parameters used during data processing and spectral matching.The presentation identifies:<ul><li>20 ppm</li><li>40 ppm</li></ul>as reasonable tolerance values.The appropriate setting should ultimately reflect the characteristics of the dataset and instrumentation. These values should therefore be regarded as practical starting points for the demonstrated workflow rather than universal settings for every LC-MS/MS analysis.<h4>4. Select Libraries for Searching</h4>One of the useful features of NIST26 is the ability to search multiple libraries simultaneously.For the type of analysis demonstrated, James Little identifies hr_msms_nist as the preferred library. Depending on the application, users can also work with APCI and low-resolution libraries or free crowd-sourced libraries.Searching several relevant libraries can broaden the identification space, particularly when investigating complex LC-MS/MS datasets.<h4>5. Examine the Initial Results</h4>After processing is complete, the results are displayed directly within the Chromatogram Window. The workspace combines several types of information, including:<ul><li>the chromatogram</li><li>a list of detected components and search results</li><li>information about library hits</li><li>comparison of experimental and library spectra</li><li>proposed compound identity and structural information</li></ul>This layout makes it possible to move quickly from a chromatographic feature to its potential identification and visually evaluate the quality of the spectral match.Abundance can also be displayed using either a linear or logarithmic scale. A logarithmic view can be particularly helpful when the chromatogram contains both highly abundant signals and much weaker components. Pages 6 and 7 of the presentation illustrate the difference between these two views.<h4>6. Save Your Configuration</h4>Once the desired program parameters have been established across the relevant windows, including the Chromatogram Window, it is useful to save the configuration.NIST allows configurations to be saved and restored as *.ini files.This can be particularly valuable when a laboratory uses different processing configurations for different datasets, libraries, or analytical workflows. Instead of manually recreating the settings each time, users can restore a previously saved configuration.According to the presentation, the Save Configuration option is available from the menu in the Lib Search tab.<h5>7. Filter the Results</h5>Initial processing can generate a large number of potential identifications. NIST26 therefore provides several options for filtering and simplifying the results.Functions available from the upper area of the Chromatogram Window include:<ul><li>Best Hits</li><li>Only IDs</li><li>Bkgd</li><li>Filter Scores</li></ul>Changing these filters affects the displayed hit list and the identifications shown in the chromatogram. This allows users to progressively narrow the results and concentrate on components that are most relevant to the analytical task.<h5>Be Careful with the Background Filter</h5>The presentation specifically highlights the Bkgd setting.According to the material, NIST suggests a background setting of approximately 75%, and this is normally useful. However, the author observed a few instances in which applying the background filter removed major peaks despite their good library search scores.These peaks had an XIC value of 0.If an important candidate disappears after applying background filtering, the settings should therefore be reviewed. For these particular peaks, the presentation notes that Bkgd = Any was required.<h4>8. Use Filter Scores with Care</h4>The Filter Scores function provides another way to remove lower-quality spectra from the displayed results.According to the NIST help information cited in the presentation, filtering is based on five quality factors:<ul><li>background</li><li>purity</li><li>max2min</li><li>signal-to-noise</li><li>isotope analysis</li></ul>The filter can be configured to display only identifications above a specified minimum score.The procedure presented is:<ol><li>Turn on Filter Scores above the chromatogram.</li><li>Enter the desired minimum score.</li><li>Select Fixed in the corresponding selection box.</li><li>Only identifications above the specified score will remain visible.</li></ol>The presentation gives 900 as an example setting for obtaining a clear view of the TIC.The author also notes that the practical interpretation of this feature is not necessarily straightforward and recommends experimenting with it to determine whether it is useful for a particular workflow.<h4>9. Sort Results and Create a List of Components of Interest</h4>The results table offers considerable flexibility for organizing potential identifications.Clicking a column header allows the results to be sorted according to the selected parameter. Multiple entries can be selected using Shift or Ctrl together with the left mouse button.Selected entries can then be sent to a smaller list containing only components of interest.The presentation emphasizes that there are many possible approaches to organizing the results. Rather than imposing a single rigid workflow, NIST26 allows users to adapt result selection and review to their specific analytical requirements.<h4>10. Manually Review Candidate Identifications</h4>Automated library searching should not necessarily be treated as the final step in compound identification. Once a list of relevant components has been created, the presentation recommends reviewing the candidates individually.A practical approach is to:<ol><li>Sort the results by RT (retention time).</li><li>Left-click the first hit to highlight it.</li><li>Use the up and down arrow keys to move through the list.</li><li>Carefully inspect the spectral comparison for every candidate.</li><li>Decide whether each identification should be included in the final report.</li></ol>An important tool for this review is the butterfly display in the upper-right portion of the workspace. It provides a visual comparison of the measured and reference spectra.Combining automated search scores with expert examination of the spectral match provides a more considered approach to reviewing proposed identifications.<h4>11. Export Selected Results to Excel</h4>Once the relevant identifications have been reviewed, selected results can easily be transferred into a spreadsheet.Highlight the desired entries, right-click, and choose:Copy Selected Hits to ClipboardThe copied information can then be pasted directly into Microsoft Excel.This provides a convenient way to create a customized results table for further evaluation, documentation, or preparation of an analytical report. The workflow is illustrated on page 13 of the presentation.<h4>12. Perform a More Detailed Review with the XIC Browser</h4>For candidate identifications requiring further investigation, the corresponding spectrum can be sent to the XIC Browser/XIC Analyzer.<blockquote>From the selected result, right-click and choose: Send To → XIC Analyzer</blockquote>This opens a more detailed view of the MS/MS data.The example on page 14 demonstrates how the isotope pattern can support an identification involving two chlorine atoms. The XIC Browser also provides MS1 information underlying the MS2 spectrum, adding another layer of information for evaluating a candidate.As with the main Chromatogram Window, users can press F1 or access Help for more detailed information about the XIC Browser and its functions.<h4>Recommended NIST26 Workflow</h4><blockquote>The overall procedure can be summarized as:mzML data → Tandem mode → mass tolerance settings → MS/MS library selection → data processing → result filtering → selection of relevant components → manual spectral review → XIC review → export of results</blockquote>A key advantage of the NIST26 Chromatogram Window is its flexibility. Users do not have to accept every automatically proposed identification. Instead, results can be filtered, sorted, organized into custom lists, and individually reviewed before being included in the final report.<h3>Conclusion</h3>The NIST26 Chromatogram Window provides a more integrated environment for processing LC-MS/MS data and performing spectral library searches. The workflow presented by James Little begins with mzML data and appropriate Tandem mode configuration, followed by library selection, processing, filtering, and systematic review of candidate identifications.An important principle is not to rely exclusively on automated scores. Filters can help transform a large results set into a manageable list of candidates, but final evaluation should also consider spectral comparisons, chromatographic information, and, where appropriate, additional examination in the XIC Browser.The ability to save processing configurations and export selected results to Excel further supports the development of practical and repeatable workflows for routine LC-MS/MS data processing.

Processing MS/MS Data in NIST26 Chromatogram Window

In September 2026, Prague will become a global meeting point for the chromatography community. From 6 to 10 September 2026, the city will host the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/events/644">35th International Symposium on Chromatography – ISC 2026</a>, one of the leading international events dedicated to chromatography, separation science, and analytical chemistry.Shimadzu is proud to support this prestigious event as a Platinum Sponsor.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ISC_2026_Shimadzu_as_a_platinum_sponsor_mensi_8c9f3eb6e7.jpg" alt="ISC 2026: Platinum sponsor Shimadzu" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_ISC_2026_Shimadzu_as_a_platinum_sponsor_mensi_8c9f3eb6e7.jpg 235w," sizes="100vw" width="1600" height="1066">ISC 2026 represents a unique opportunity for scientists, researchers, industry experts, application specialists, and technology providers to meet, exchange knowledge, and discuss the latest developments in chromatography and separation science. The conference will bring together experts from academia, pharmaceutical industry, environmental analysis, food safety, healthcare, life sciences, and many other fields where analytical technologies play an essential role.We would like to warmly invite our customers, partners, colleagues, and the wider scientific community to join us at ISC 2026 in Prague. The conference will offer an inspiring scientific programme, lectures by internationally recognised experts, dedicated sessions on current trends and challenges, an exhibition area, and valuable opportunities for networking with the global chromatography community.Following the successful <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/events/642">ISC 2024 in Liverpool</a>, ISC 2026 will bring this important international symposium to the heart of Europe. We are looking forward to meeting you in Prague and contributing together to a strong and successful edition of ISC.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/1728218963766_9d5394a9da.jpg" alt="Gesa Schad: Shimadzu at ISC 2024 in Liverpool" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_1728218963766_9d5394a9da.jpg 156w," sizes="100vw" width="1280" height="1280">Visit <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/events/1371">Shimadzu at ISC 2026</a> in Prague and be part of one of the key international events in chromatography and separation science.<blockquote>Registration is open on the official conference website: <a target="_blank" rel="noopener noreferrer" href="https://www.isc2026.org">www.isc2026.org</a></blockquote><h3>Shimadzu Vendor Seminar: Three New Reasons to Rethink Your Workflow</h3><ul><li>07 September 2026</li><li>12 PM - &nbsp;13 PM</li></ul>Join us for an engaging seminar introducing three new analytical solutions designed to help laboratories work smarter, respond faster, improve robustness, and achieve greater confidence in their results. As analytical demands continue to grow, laboratories need technologies that not only deliver strong performance, but also enhance efficiency, flexibility, and ease of operation. This seminar will highlight how our latest innovations in IC, UHPLC, and GC-MS/MS can streamline workflows, support complex applications, and create new opportunities for productivity across your laboratory.<h5><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=1&amp;search=nexera+ic">Nexera IC</a> – New compact ion chromatography solution for reliable, high-sensitivity anion and cation analysis.</h5><ul><li>Dr. Gesa Schad</li></ul><h5><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=1&amp;search=nexera+x4">Nexera X4</a> – Next-generation UHPLC platform designed for ultra-high performance and robust operation without compromise.</h5><ul><li>Dr. Gesa Schad</li></ul><h5><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/c146_e517_16e9bfd835.pdf">GCMS-TQ RX Series</a> – Advanced triple quadrupole GC-MS/MS systems engineered for enhanced sensitivity and dependable trace-level analysis.</h5><ul><li>Dr. Waldemar Weber</li></ul><blockquote><a target="_blank" rel="noopener noreferrer" href="https://www.shimadzu.eu/forms/vendor-seminar-registartion_isc2026.html">Register here to attend Shimadzu Vendor Seminar</a></blockquote><h3>Scientific Programme Presentation</h3><ul><li>08 September 2026</li><li>10:30 – 12:00</li><li>Fun 5: Separations with Supercritical and Subcritical Fluids&nbsp;</li></ul><h5>Accelerating Forensic Analysis: A Rapid SFC-MS Workflow for Novel Regioisomeric Fluorofentanyl Derivatives and Related Compounds</h5><ul><li>Dr. Jennifer Field, Shimadzu UK, Milton Keynes, UK</li></ul><h3>Winners of the Shimadzu student sponsorship</h3>We are thrilled to announce the winners of the Shimadzu student sponsorship for free tickets to attend the ISC 2026 conference. We received a great number of high-quality abstracts, showcasing the innovative research being conducted by students all over Europe.We extend our heartfelt congratulations to all the winners and look forward to their contributions at the conference. To those who were not selected this time, we encourage you to continue your excellent work and apply again in the future.And the lucky winners are: &nbsp; &nbsp;<h5>Chromatography supports electrochemistry–mass spectrometry (EC-MS) analysis of olaparib and inavolisib metabolites</h5><ul><li>Fabiola Dontsi Tonleu, University of Münster, Germany&nbsp;</li><li>Abstract ID: ISC-0262 &nbsp; &nbsp;</li></ul><h5>Towards circular wind energy: Sample preparation strategies in combination with GC×GC-TOFMS for the characterization of wind turbine blade recycling products&nbsp;</h5><ul><li>Giulia Giacoppo, University of Ferrara, Italy</li><li>Abstract ID: ISC-0169 &nbsp; &nbsp;</li></ul><h5>Implementing SFC for analysis of antibiotics in manure</h5><ul><li>Michelle Hussock, University of Duisburg-Essen, Germany</li><li>Abstract ID: ISC-0220 &nbsp;</li></ul><h5>Identifying optimal LC-MS conditions for oligonucleotide mapping of mRNA: A multi-criteria assessment of methods</h5><ul><li>Athanasios Tsalmpouris, University of Geneva, Switzerland</li><li>Abstract ID: ISC-0211</li></ul><h5>From weeds to crop protectants: phytochemical profiling and dual biopesticidal activities of Chenopodium ambrosioides and Cleome gynandra &nbsp;</h5><ul><li>Rahim Ullah, University of Helsinki, Finland</li><li>Abstract ID: ISC-0249 &nbsp;</li></ul><h4>Poster Presentations</h4><h5>Optimal column selection for experimental surface polarity measurement using supercritical fluid chromatography</h5><ul><li>Yoshiyuki Watabe, Shimadzu Corporation, Kyoto, Japan</li><li>Session: BIO08 - Sample preparation and automation</li></ul><h5>Characterization of SFC stationary phases for Analysis of Essential Oils</h5><ul><li>Martin Meyer, Shimadzu Europa, Duisburg, Germany</li></ul><h5>High-sensitivity analysis of more than 100 pesticides in food using microflow LC-MS/MS</h5><ul><li>Ramy Abou Naccoul, Shimadzu France, Marne la Vallée, France</li><li>Session: HYP05 - Microfluidic and chip separations in MS</li></ul><h5>Streamlined selection of optimal separation conditions using an automated LC/SFC method development platform</h5><ul><li>Dr. Gesa Schad, Shimadzu Europa, Duisburg, Germany</li><li>Session: FUN05 - Separations with super - and sub-critical fluids</li></ul><h5>Ion Chromatographic Determination of Major Inorganic Ions in Beer for Quality Control and Product Differentiation</h5><ul><li>Dr. Vadim Kraft, Shimadzu Europa, Duisburg, Germany</li><li>Session: FUN08 - Separation modes</li></ul><h5>Efficient SFC Method Development for the Analysis of Essential Oils Using Shimadzu LabSolutions MD</h5><ul><li>Dr. Brigitte Bollig, Shimadzu Europa, Duisburg, Germany</li><li>Session: HYP02 - SFC-MS</li></ul><h5>Assessing the applicability of retention modelling as a tool for oligonucleotide analysis using ion-pair HPLC</h5><ul><li>Richard Hodgson, Shimadzu UK, Milton Keynes, UK</li></ul><h3><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/article/7477">ISC 2026 Scientific program</a> highlights</h3>The programme runs across three parallel tracks — Fundamentals, Bioanalysis &amp; Omics Applications, and Hyphenation Techniques — covering topics from column technology, chiral and multi-dimensional separations, and AI/machine learning in separation science, to proteomics, green analytical chemistry, and LC/MS data processing.<h4>Why it matters for industry</h4>This year's Industry Program is shaping up particularly well, giving companies a direct space to connect with academia and the next generation of scientists:<ul><li>Industry &amp; Education – bridging academic training with industry needs</li><li>Career Presentation – companies showcase career paths and hiring needs to students and professionals</li><li>AI in Separation Science – real-world use of AI in method development and lab workflows</li><li>Sustainability in Separation Science – translating green chemistry research into industrial practice</li></ul>

Shimadzu to Join ISC 2026 in Prague as Platinum Sponsor

Article

Product

Events

Academy

Video

Science and research

Software

A unique company dedicated to serving science helping our customers drive productivity and accelerate results. Through our premier brands – Thermo Scientific, Applied Biosystems, Invitrogen, Fisher Scientific and Unity Lab Services.

Thermo Fisher Scientific

Shimadzu Corporation is a global technology company founded in Kyoto, Japan, in 1875. Guided by its philosophy of “Contributing to Society through Science and Technology,” Shimadzu develops advanced analytical and measuring instruments, medical systems, industrial machinery, and other technologies supporting research, healthcare, industry, and society worldwide.

SHIMADZU CORPORATION

My main interest is the identification of organic compounds by mass spectrometry in organic mixtures.

James Little/Mass Spec Interpretation Services

Methyl-1-Testosterone Analysis

Targeted HPLC analysis of methyl-1-testosterone in pills, tablets, capsules, and raw API powders. The test confirms compound identity and determines its content.

The Methyl-1-Testosterone Analysis is a targeted laboratory test designed to confirm the identity and determine the amount of methyl-1-testosterone in oral dosage forms and raw active pharmaceutical ingredient (API) powders.The analysis is suitable for pills, tablets, and capsules, with results reported in milligrams per tablet or capsule. Raw API powders can be evaluated by percentage content, with optional purity reporting in % (m/m).<h4>About Methyl-1-Testosterone</h4>Methyl-1-testosterone, commonly abbreviated as M1T, is a synthetic, orally active anabolic-androgenic steroid. It is a methylated derivative of 1-testosterone that interacts with androgen receptors and exhibits anabolic and androgenic activity. Methyl-1-testosterone is distinct from methyltestosterone despite the similarity of their names.M1T has been characterized as a designer steroid and was not marketed for approved medical use. Scientific research has investigated its tissue-specific anabolic and androgenic effects, metabolism, and potential adverse effects.<h4>Key Features</h4><ul><li>Targeted identification and quantification of methyl-1-testosterone</li><li>Suitable for pills, tablets, capsules, and raw API powders</li><li>Analysis by HPLC</li><li>Results for oral products reported in mg per tablet or capsule</li><li>Results for raw API powders reported as percentage content</li><li>Optional purity reporting in % (m/m) for raw API powders</li><li>Minimum sample amount of three tablets or capsules</li><li>Minimum sample amount of 200 mg for raw API powders</li><li>Average turnaround time of 7 business days</li></ul><h4>Analysis Parameters</h4><ul><li>Target compound: Methyl-1-testosterone</li><li>Testing method: HPLC</li><li>Minimum amount of target compound for evaluation in oral products: 4 mg per pill, tablet, or capsule</li><li>Minimum content of target compound for evaluation in raw API powders: 10%</li><li>Result format for oral products: mg per tablet or capsule</li><li>Result format for raw API powders: % [98%+, 96%+ or % value such as 94.15%]</li><li>Minimum sample amount for oral products: Three tablets or capsules</li><li>Minimum sample amount for raw API powders: 200 mg</li><li>Average turnaround time: 7 business days</li></ul><blockquote>Important Notice<ul><li>This analysis is specifically intended for methyl-1-testosterone. It does not automatically screen the sample for other anabolic steroids or undeclared substances.</li><li>For oral products, the minimum amount of methyl-1-testosterone required for evaluation is 4 mg per pill, tablet, or capsule. For raw API powders, the minimum content is 10%. Samples below these values may not be reliably evaluated within the standard scope of the analysis.</li><li>Purity reporting in % (m/m) is available only for raw API powders.</li></ul></blockquote><h4>Optional Additional Analyses</h4>The following optional laboratory services are available:<ul><li>Complete Raw Analytical Data</li><li>Alternative Result Format: Purity in % (m/m) - only for raw API powders</li><li>Batch Variance Testing</li><li>Fentanyl Screening</li><li>GC–MS Contamination Screening</li><li>Heavy Metals Analysis (As, Cd, Pb, Hg)</li><li>Additional Laboratory Report</li></ul>

Methyltestosterone Analysis

Targeted HPLC analysis of methyltestosterone in pills, tablets, capsules, and raw API powders. The test confirms compound identity and determines its content.

The Methyltestosterone Analysis is a targeted laboratory test designed to confirm the identity and determine the amount of methyltestosterone in oral dosage forms and raw active pharmaceutical ingredient (API) powders.The analysis is suitable for pills, tablets, and capsules, with results reported in milligrams per tablet or capsule. Raw API powders can be evaluated by percentage content, with optional purity reporting in % (m/m).<h4>About Methyltestosterone</h4>Methyltestosterone, also known as 17α-methyltestosterone, is a synthetic, orally active anabolic-androgenic steroid derived from testosterone. The addition of a methyl group at the 17α position enables oral administration. It acts as an androgen receptor agonist and exhibits both androgenic and anabolic effects.Methyltestosterone has been used medically in oral formulations for androgen replacement and other hormone-related indications. It is distinct from methyl-1-testosterone despite the similarity of their names. Like other 17α-alkylated androgenic steroids, methyltestosterone has been associated with a risk of cholestatic liver injury and other hepatic complications.<h4>Key Features</h4><ul><li>Targeted identification and quantification of methyltestosterone</li><li>Suitable for pills, tablets, capsules, and raw API powders</li><li>Analysis by HPLC</li><li>Results for oral products reported in mg per tablet or capsule</li><li>Results for raw API powders reported as percentage content</li><li>Optional purity reporting in % (m/m) for raw API powders</li><li>Minimum sample amount of three tablets or capsules</li><li>Minimum sample amount of 200 mg for raw API powders</li><li>Average turnaround time of 7 business days</li></ul><h4>Analysis Parameters</h4><ul><li>Target compound: Methyltestosterone</li><li>CAS number: 58-18-4</li><li>Testing method: HPLC</li><li>Minimum amount of target compound for evaluation in oral products: 4 mg per pill, tablet, or capsule</li><li>Minimum content of target compound for evaluation in raw API powders: 10%</li><li>Result format for oral products: mg per tablet or capsule</li><li>Result format for raw API powders: % [98%+, 96%+ or % value such as 94.15%]</li><li>Minimum sample amount for oral products: Three tablets or capsules</li><li>Minimum sample amount for raw API powders: 200 mg</li><li>Average turnaround time: 7 business days</li></ul><blockquote>Important Notice<ul><li>This analysis is specifically intended for methyltestosterone. It does not automatically screen the sample for other anabolic steroids or undeclared substances.</li><li>For oral products, the minimum amount of methyltestosterone required for evaluation is 4 mg per pill, tablet, or capsule. For raw API powders, the minimum content is 10%. Samples below these values may not be reliably evaluated within the standard scope of the analysis.</li><li>Purity reporting in % (m/m) is available only for raw API powders.</li></ul></blockquote><h4>Optional Additional Analyses</h4>The following optional laboratory services are available:<ul><li>Complete Raw Analytical Data</li><li>Alternative Result Format: Purity in % (m/m) - only for raw API powders</li><li>Batch Variance Testing</li><li>Fentanyl Screening</li><li>GC–MS Contamination Screening</li><li>Heavy Metals Analysis (As, Cd, Pb, Hg)</li><li>Additional Laboratory Report</li></ul>

Mibolerone Analysis

Targeted HPLC analysis of mibolerone in oil-based samples, oral products, and raw API powders. The test confirms compound identity and determines its content.

The Mibolerone Analysis is a targeted laboratory test designed to confirm the identity and determine the amount of mibolerone in oil-based samples, oral dosage forms, and raw active pharmaceutical ingredient (API) powders.For oil-based samples, results are reported in mg/mL. For tablets and capsules, results are reported in mg per tablet or capsule. Raw API powders can be evaluated by percentage content, with optional purity reporting in % (m/m).<h4>About Mibolerone</h4>Mibolerone is a synthetic, orally active anabolic-androgenic steroid, also known as dimethylnandrolone or 7α,17α-dimethyl-19-nortestosterone. It interacts with androgen receptors and exhibits strong androgenic and anabolic activity. The compound has also been studied for its progestogenic activity.Mibolerone was developed for veterinary use and has been used to suppress oestrus in female dogs. It is distinct from methyltestosterone and methyl-1-testosterone despite belonging to the same broader class of synthetic androgenic steroids.<h4>Key Features</h4><ul><li>Targeted identification and quantification of mibolerone</li><li>Suitable for oil-based samples, tablets, capsules, and raw API powders</li><li>Analysis by HPLC</li><li>Results for oil samples reported in mg/mL</li><li>Results for oral products reported in mg per tablet or capsule</li><li>Results for raw API powders reported as percentage content</li><li>Optional purity reporting in % (m/m) for raw API powders</li><li>Minimum sample amount of 0.5–1 mL for oil samples</li><li>Minimum sample amount of three tablets or capsules</li><li>Minimum sample amount of 200 mg for raw API powders</li><li>Average turnaround time of 7 business days</li></ul><h4>Analysis Parameters</h4><ul><li>Target compound: Mibolerone</li><li>CAS number: 3704-09-4</li><li>Molecular weight: 302.5 g/mol</li><li>Testing method: HPLC</li><li>Minimum concentration for evaluation in oil samples: 0.5 mg/mL</li><li>Minimum amount for evaluation in oral products: 0.5 mg per pill, tablet, or capsule</li><li>Minimum content for evaluation in raw API powders: 10%</li><li>Result format for oil samples: mg/mL</li><li>Result format for oral products: mg per tablet or capsule</li><li>Result format for raw API powders: % [98%+, 96%+ or % value such as 94.15%]</li><li>Minimum sample amount for oil samples: 0.5–1 mL</li><li>Minimum sample amount for oral products: Three tablets or capsules</li><li>Minimum sample amount for raw API powders: 200 mg</li><li>Average turnaround time: 7 business days</li></ul><blockquote>Important Notice<ul><li>This analysis is specifically intended for mibolerone. It does not automatically screen the sample for other anabolic steroids or undeclared substances.</li><li>For oil samples, the minimum concentration of mibolerone for evaluation is 0.5 mg/mL. For oral products, the minimum amount is 0.5 mg per pill, tablet, or capsule. For raw API powders, the minimum content is 10%. Samples below these values may not be reliably evaluated within the standard scope of the analysis.</li><li>Purity reporting in % (m/m) is available only for raw API powders.</li></ul></blockquote><h4>Optional Additional Analyses</h4>The following optional laboratory services are available:<ul><li>Complete Raw Analytical Data</li><li>Alternative Result Format: Purity in % (m/m) - only for raw API powders</li><li>Fentanyl Screening</li><li>GC–MS Contamination Screening</li><li>Heavy Metals Analysis (As, Cd, Pb, Hg)</li><li>Additional Laboratory Report</li></ul>

Blind common SARMs and related compounds screening

Blind HPLC screening of common SARMs and related compounds in oral products and raw API powders. The analysis identifies and quantifies all detected target compounds, including mixtures.

The Blind Common SARMs and Related Compounds Screening is a comprehensive laboratory analysis designed to identify and quantify commonly encountered selective androgen receptor modulators (SARMs) and related compounds in oral products and raw active pharmaceutical ingredient (API) powders.Because this is a blind analysis, there is no need to specify which compound is expected in the sample. The analysis screens for all target compounds listed below and identifies and quantifies every detected substance, including samples containing mixtures of multiple compounds.<h4>About the Target Compounds</h4>Selective androgen receptor modulators are compounds that bind to androgen receptors and are designed to produce tissue-selective androgenic effects. The screening includes RAD-140, S-4, S-23, MK-2866, and LGD-4033. MK-2866, also known as ostarine or enobosarm, and LGD-4033, also known as ligandrol, are non-steroidal SARMs that have been investigated for their effects on muscle, bone, and body composition.The analysis also covers YK-11 and SR-9009 as related compounds. YK-11 is generally classified as a steroidal androgen receptor modulator, whereas SR-9009 is not a SARM but a synthetic compound associated with REV-ERB signalling. Their inclusion broadens the analysis beyond conventional non-steroidal SARMs.Products marketed as SARMs may contain multiple active substances, undeclared compounds, or ingredients that differ from those stated on the label. Blind screening therefore enables the detection and quantification of all compounds included in the predefined analytical scope.<h4>Key Features</h4><ul><li>Blind screening without the need to declare the expected compound</li><li>Identification and quantification of common SARMs and related compounds</li><li>Detection of mixtures containing multiple target compounds</li><li>Suitable for pills, tablets, capsules, and raw API powders</li><li>Analysis by HPLC</li><li>Results for oral products reported in mg per tablet or capsule</li><li>Results for raw API powders reported as percentage content</li><li>Optional purity reporting in % (m/m) for raw API powders</li><li>Minimum sample amount of three tablets or capsules</li><li>Minimum sample amount of 200 mg for raw API powders</li><li>Average turnaround time of 7 business days</li></ul><h4>Analysis Parameters</h4><ul><li>Target compounds: RAD-140, S-4, S-23, MK-2866, LGD-4033, YK-11, and SR-9009</li><li>Other names: Testolone, Andarine, Ostarine, Ligandrol, Myostine, and Stenabolic</li><li>CAS numbers: 1182367-47-0 (RAD-140), 401900-40-1 (S-4), 1010396-29-8 (S-23), 841205-47-8 (MK-2866), 1165910-22-4 (LGD-4033), 1370003-76-1 (YK-11), and 1379686-30-2 (SR-9009)</li><li>Testing method: HPLC</li><li>Minimum amount of target compound for evaluation in oral products: 2 mg per pill, tablet, or capsule</li><li>Minimum content of target compound for evaluation in raw API powders: 10%</li><li>Result format for oral products: mg per tablet or capsule</li><li>Result format for raw API powders: % [98%+, 96%+ or % value such as 94.15%]</li><li>Minimum sample amount for oral products: Three tablets or capsules</li><li>Minimum sample amount for raw API powders: 200 mg</li><li>Average turnaround time: 7 business days</li></ul><blockquote>Important Notice<ul><li>The analysis covers only the compounds included in the target list. Other SARMs, related substances, contaminants, or undeclared ingredients are not automatically included in the main analysis.</li><li>For oral products, the minimum amount of a target compound for evaluation is 2 mg per pill, tablet, or capsule. For raw API powders, the minimum content is 10%. Samples below these values may not be reliably evaluated within the standard scope of the analysis.</li><li>Purity reporting in % (m/m) is available only for raw API powders.</li></ul></blockquote><h4>Optional Additional Analyses</h4>The following optional laboratory services are available:<ul><li>Complete Raw Analytical Data</li><li>Alternative Result Format: Purity in % (m/m) - only for raw API powders</li><li>Batch Variance Testing</li><li>Fentanyl Screening</li><li>GC–MS Contamination Screening</li><li>Heavy Metals Analysis (As, Cd, Pb, Hg)</li><li>Additional Laboratory Report</li></ul>

BPC-157 analysis

HPLC analysis of BPC-157 for identity confirmation, amount determination and peptide purity in lyophilized samples and raw API powders.

This analysis is designed to confirm the identity and determine the amount and peptide purity of BPC-157 in lyophilized samples and raw API powders. HPLC testing provides information about the actual BPC-157 content of the sample and the proportion of the main peptide component relative to chromatographically detectable impurities.<h4>BPC-157</h4>BPC-157 is a synthetic peptide composed of 15 amino acid residues. It is also known as PL 14736, Body Protection Compound 157 and Bepecin.Its molecular weight is approximately 1,419.5 Da. The analysis confirms whether the sample contains BPC-157, determines its amount and evaluates peptide purity.<h4>What the Analysis Determines</h4><ul><li>Identity of BPC-157</li><li>Amount of BPC-157 in the sample</li><li>Peptide purity</li><li>Results in a format appropriate for the submitted sample type</li></ul><h4>Analysis Parameters</h4><ul><li>Target compound: BPC-157</li><li>Other names: PL 14736, Body Protection Compound 157, Bepecin</li><li>CAS number: 137525-51-0</li><li>Molecular weight: 1,419.5 Da</li><li>Sequence: H-Gly-Glu-Pro-Pro-Pro-Gly-Lys-Pro-Ala-Asp-Asp-Ala-Gly-Leu-Val-OH</li><li>Testing method: HPLC</li><li>Detection limit: less than one twentieth of the usual dosage per vial</li><li>Result format for lyophilizates: mg per vial and peptide purity</li><li>Alternative result format: m/m purity and peptide purity</li><li>Minimum lyophilizate sample: one whole unopened vial containing the lyophilizate</li><li>Minimum raw API powder sample: 30 mg in a sealed glass vial to prevent moisture absorption</li><li>Average turnaround time: 7 business days</li></ul><blockquote><h5>Important Notice</h5>The alternative m/m purity result format is intended exclusively for raw API powders. For lyophilized samples, the standard result format provides the amount of BPC-157 in mg per vial together with peptide purity.</blockquote><h4>Additional Analyses</h4><h5>TFA Analysis</h5><ul><li>Detection and measurement of trifluoroacetic acid (TFA) in the sample. Results are reported in mg per vial.</li></ul><h5>Raw Data</h5><ul><li>Delivery of the available raw analytical data from the primary test and all applicable additional analyses.</li></ul><h5>Fentanyl Presence Analysis</h5><h5>Alternative Result Format – m/m Purity</h5><ul><li>Alternative reporting of the result as mass-by-mass purity. This option is intended exclusively for raw API powders.</li></ul><h5>Variance Testing</h5><ul><li>Analysis of multiple sample units to assess variation within a single batch. All submitted samples must originate from the same batch of the same product.</li></ul><h5>pH Measurement</h5><h5>Endotoxin Analysis</h5><ul><li>Measurement of bacterial endotoxins, particularly lipopolysaccharides (LPS), in the sample. This analysis is available only for finished products and should not be ordered for raw powders.</li><li>The standard test provides accurate results up to 10 EU per vial. Values above 10 EU per vial are estimated and require an additional test with a different dilution for precise determination. Sending two vials is therefore recommended.</li><li>Where endotoxin levels above 10 EU per vial are expected, the method can be calibrated for the higher range in advance.</li></ul><h5>CHNS Mass Report</h5><ul><li>Elemental analysis providing accurate measurement of nitrogen and sulphur content. The results can be used to determine Net Peptide Content (NPC).</li></ul><h5>Additional Report</h5><ul><li>A separate additional laboratory report issued under a different client name.</li></ul><h5>LC-MS Screening for Peptide Contamination</h5><ul><li>LC-MS screening for contamination with other peptides or peptide degradation products. Detection is limited to peptides included in the available testing portfolio.</li><li>The initial screening provides identification only. If contamination is detected, quantitative measurement may subsequently be ordered.</li></ul><h5>Sterility Testing</h5><ul><li>TAMC and TYMC testing checks the product for the presence of bacteria, yeasts and moulds. Additional unopened sample units must be submitted for analysis. The average turnaround time for this test is 14 days.</li></ul><h5>Heavy Metals Analysis</h5><ul><li>Detection of arsenic, cadmium, lead and mercury in the sample. Testing for other metals can be arranged individually.</li></ul>

Adamax analysis

HPLC analysis of ADAMAX for identity confirmation, amount determination and peptide purity in lyophilized samples and raw API powders.

This analysis is designed to confirm the identity and determine the amount and peptide purity of ADAMAX in lyophilized samples and raw API powders. HPLC testing provides information about the actual content of the target peptide and its purity relative to chromatographically detectable impurities.<h4>ADAMAX</h4>ADAMAX is a synthetic acetylated peptide composed of nine amino acid residues. Its sequence begins with an N-terminal acetyl group and ends with a free carboxyl group.The molecular weight of ADAMAX is approximately 984 Da. HPLC analysis confirms the identity of the peptide, determines its amount in the sample and evaluates peptide purity.<h4>What the Analysis Determines</h4><ul><li>Identity of ADAMAX</li><li>Amount of ADAMAX in the sample</li><li>Peptide purity</li><li>Results in a format appropriate for the submitted sample type</li></ul><h4>Analysis Parameters</h4><ul><li>Target compound: ADAMAX</li><li>Molecular weight: 984 Da</li><li>Sequence: Ac-Met-Glu-His-Phe-Pro-Gly-Pro-Ala-Gly-OH</li><li>Testing method: HPLC</li><li>Detection limit: less than one twentieth of the usual dosage per vial</li><li>Result format for lyophilizates: mg per vial and peptide purity</li><li>Alternative result format: m/m purity and peptide purity</li><li>Minimum lyophilizate sample: one whole unopened vial containing the lyophilizate</li><li>Minimum raw API powder sample: 30 mg in a sealed glass vial to prevent moisture absorption</li><li>Average turnaround time: 7 business days</li></ul><blockquote><h5>Important Notice</h5>The alternative m/m purity result format is intended exclusively for raw API powders. For lyophilized samples, the standard result format provides the amount of ADAMAX in mg per vial together with peptide purity.</blockquote><h4>Additional Analyses</h4><h5>TFA Analysis</h5><ul><li>Detection and measurement of trifluoroacetic acid (TFA) in the sample. Results are reported in mg per vial.</li></ul><h5>Raw Data</h5><ul><li>Delivery of the available raw analytical data from the primary test and all applicable additional analyses.</li></ul><h5>Fentanyl Presence Analysis</h5><h5>Alternative Result Format – m/m Purity</h5><ul><li>Alternative reporting of the result as mass-by-mass purity. This option is intended exclusively for raw API powders.</li></ul><h5>Variance Testing</h5><ul><li>Analysis of multiple sample units to assess variation within a single batch. All submitted samples must originate from the same batch of the same product.</li></ul><h5>pH Measurement</h5><h5>Endotoxin Analysis</h5><ul><li>Measurement of bacterial endotoxins, particularly lipopolysaccharides (LPS), in the sample. This analysis is available only for finished products and should not be ordered for raw powders.</li><li>The standard test provides accurate results up to 10 EU per vial. Values above 10 EU per vial are estimated and require an additional test with a different dilution for precise determination. Sending two vials is therefore recommended.</li><li>Where endotoxin levels above 10 EU per vial are expected, the method can be calibrated for the higher range in advance.</li></ul><h5>CHNS Mass Report</h5><ul><li>Elemental analysis providing accurate measurement of nitrogen and sulphur content. The results can be used to determine Net Peptide Content (NPC).</li></ul><h5>Additional Report</h5><ul><li>A separate additional laboratory report issued under a different client name.</li></ul><h5>LC-MS Screening for Peptide Contamination</h5><ul><li>LC-MS screening for contamination with other peptides or peptide degradation products. Detection is limited to peptides included in the available testing portfolio.</li><li>The initial screening provides identification only. If contamination is detected, quantitative measurement may subsequently be ordered.</li></ul><h5>Sterility Testing</h5><ul><li>TAMC and TYMC testing checks the product for the presence of bacteria, yeasts and moulds. Additional unopened sample units must be submitted for analysis. The average turnaround time for this test is 14 days.</li></ul><h5>Heavy Metals Analysis</h5><ul><li>Detection of arsenic, cadmium, lead and mercury in the sample. Testing for other metals can be arranged individually.</li></ul>

AHK-Cu analysis

HPLC analysis of AHK-Cu for identity confirmation, amount determination and peptide purity in lyophilized samples and raw API powders.

This analysis is designed to confirm the identity and determine the amount and peptide purity of AHK-Cu in lyophilized samples and raw API powders. HPLC testing provides information about the actual content of the target compound and its proportion relative to chromatographically detectable impurities.<h4>AHK-Cu</h4>AHK-Cu is a copper complex of the tripeptide alanyl-histidyl-lysine, composed of the amino acids alanine, histidine and lysine. It differs from the better-known GHK-Cu complex in its first amino acid, containing alanine instead of glycine.AHK-Cu is an experimental peptide complex investigated particularly in relation to biological processes in hair follicles and dermal papilla cells. A published study evaluated its effects on ex vivo human hair follicles and cultured dermal papilla cells.HPLC analysis confirms the presence of AHK-Cu in the sample, determines its amount and evaluates peptide purity.<h4>What the Analysis Determines</h4><ul><li>Identity of AHK-Cu</li><li>Amount of AHK-Cu in the sample</li><li>Peptide purity</li><li>Results in a format appropriate for the submitted sample type</li></ul><h4>Analysis Parameters</h4><ul><li>Target compound: AHK-Cu</li><li>Testing method: HPLC</li><li>Detection limit: less than one twentieth of the usual dosage per vial</li><li>Result format for lyophilizates: mg per vial and peptide purity</li><li>Alternative result format: m/m purity and peptide purity</li><li>Minimum lyophilizate sample: one whole unopened vial containing the lyophilizate</li><li>Minimum raw API powder sample: 30 mg in a sealed glass vial to prevent moisture absorption</li><li>Average turnaround time: 7 business days</li></ul><blockquote><h5>Important Notice</h5>The alternative m/m purity result format is intended exclusively for raw API powders. For lyophilized samples, the standard result format provides the amount of AHK-Cu in mg per vial together with peptide purity.</blockquote><h4>Additional Analyses</h4><h5>TFA Analysis</h5><ul><li>Detection and measurement of trifluoroacetic acid (TFA) in the sample. Results are reported in mg per vial.</li></ul><h5>Raw Data</h5><ul><li>Delivery of the available raw analytical data from the primary test and all applicable additional analyses.</li></ul><h5>Fentanyl Presence Analysis</h5><h5>Alternative Result Format – m/m Purity</h5><ul><li>Alternative reporting of the result as mass-by-mass purity. This option is intended exclusively for raw API powders.</li></ul><h5>Variance Testing</h5><ul><li>Analysis of multiple sample units to assess variation within a single batch. All submitted samples must originate from the same batch of the same product.</li></ul><h5>pH Measurement</h5><h5>Endotoxin Analysis</h5><ul><li>Measurement of bacterial endotoxins, particularly lipopolysaccharides (LPS), in the sample. This analysis is available only for finished products and should not be ordered for raw powders.</li><li>The standard test provides accurate results up to 10 EU per vial. Values above 10 EU per vial are estimated and require an additional test with a different dilution for precise determination. Sending two vials is therefore recommended.</li><li>Where endotoxin levels above 10 EU per vial are expected, the method can be calibrated for the higher range in advance.</li></ul><h5>CHNS Mass Report</h5><ul><li>Elemental analysis providing accurate measurement of nitrogen and sulphur content. The results can be used to determine Net Peptide Content (NPC).</li></ul><h5>Additional Report</h5><ul><li>A separate additional laboratory report issued under a different client name.</li></ul><h5>LC-MS Screening for Peptide Contamination</h5><ul><li>LC-MS screening for contamination with other peptides or peptide degradation products. Detection is limited to peptides included in the available testing portfolio.</li><li>The initial screening provides identification only. If contamination is detected, quantitative measurement may subsequently be ordered.</li></ul><h5>Sterility Testing</h5><ul><li>TAMC and TYMC testing checks the product for the presence of bacteria, yeasts and moulds. Additional unopened sample units must be submitted for analysis. The average turnaround time for this test is 14 days.</li></ul><h5>Heavy Metals Analysis</h5><ul><li>Detection of arsenic, cadmium, lead and mercury in the sample. Testing for other metals can be arranged individually.</li></ul>

ARA-290 Analysis

HPLC analysis of ARA-290 for identity confirmation, amount determination and peptide purity in lyophilized samples and raw API powders.

This analysis is designed to confirm the identity and determine the amount and peptide purity of ARA-290 in lyophilized samples and raw API powders. HPLC testing provides information about the target peptide content of the sample and its purity relative to chromatographically detectable impurities.<h4>ARA-290</h4>ARA-290 is a synthetic linear peptide composed of 11 amino acid residues. It was engineered from the structure of erythropoietin helix B and is described in scientific literature as a nonerythropoietic peptide derived from erythropoietin.Its sequence begins with pyroglutamic acid, represented by Pyr, and its molecular weight is approximately 1,257 Da.HPLC analysis confirms the presence of ARA-290 in the sample, determines its amount and evaluates peptide purity.<h4>What the Analysis Determines</h4><ul><li>Identity of ARA-290</li><li>Amount of ARA-290 in the sample</li><li>Peptide purity</li><li>Results in a format appropriate for the submitted sample type</li></ul><h4>Analysis Parameters</h4><ul><li>Target compound: ARA-290</li><li>CAS number: 1208243-50-8</li><li>Molecular weight: 1,257 Da</li><li>Sequence: H-Pyr-Glu-Gln-Leu-Glu-Arg-Ala-Leu-Asn-Ser-Ser-OH</li><li>Testing method: HPLC</li><li>Detection limit: less than one twentieth of the usual dosage per vial</li><li>Result format for lyophilizates: mg per vial and peptide purity</li><li>Alternative result format: m/m purity and peptide purity</li><li>Minimum lyophilizate sample: one whole unopened vial containing the lyophilizate</li><li>Minimum raw API powder sample: 30 mg in a sealed glass vial to prevent moisture absorption</li><li>Average turnaround time: 7 business days</li></ul><blockquote><h5>Important Notice</h5>The alternative m/m purity result format is intended exclusively for raw API powders. For lyophilized samples, the standard result format provides the amount of ARA-290 in mg per vial together with peptide purity.</blockquote><h4>Additional Analyses</h4><h5>TFA Analysis</h5><ul><li>Detection and measurement of trifluoroacetic acid (TFA) in the sample. Results are reported in mg per vial.</li></ul><h5>Raw Data</h5><ul><li>Delivery of the available raw analytical data from the primary test and all applicable additional analyses.</li></ul><h5>Fentanyl Presence Analysis</h5><h5>Alternative Result Format – m/m Purity</h5><ul><li>Alternative reporting of the result as mass-by-mass purity. This option is intended exclusively for raw API powders.</li></ul><h5>Variance Testing</h5><ul><li>Analysis of multiple sample units to assess variation within a single batch. All submitted samples must originate from the same batch of the same product.</li></ul><h5>pH Measurement</h5><h5>Endotoxin Analysis</h5><ul><li>Measurement of bacterial endotoxins, particularly lipopolysaccharides (LPS), in the sample. This analysis is available only for finished products and should not be ordered for raw powders.</li><li>The standard test provides accurate results up to 10 EU per vial. Values above 10 EU per vial are estimated and require an additional test with a different dilution for precise determination. Sending two vials is therefore recommended.</li><li>Where endotoxin levels above 10 EU per vial are expected, the method can be calibrated for the higher range in advance.</li></ul><h5>CHNS Mass Report</h5><ul><li>Elemental analysis providing accurate measurement of nitrogen and sulphur content. The results can be used to determine Net Peptide Content (NPC).</li></ul><h5>Additional Report</h5><ul><li>A separate additional laboratory report issued under a different client name.</li></ul><h5>LC-MS Screening for Peptide Contamination</h5><ul><li>LC-MS screening for contamination with other peptides or peptide degradation products. Detection is limited to peptides included in the available testing portfolio.</li><li>The initial screening provides identification only. If contamination is detected, quantitative measurement may subsequently be ordered.</li></ul><h5>Sterility Testing</h5><ul><li>TAMC and TYMC testing checks the product for the presence of bacteria, yeasts and moulds. Additional unopened sample units must be submitted for analysis. The average turnaround time for this test is 14 days.</li></ul><h5>Heavy Metals Analysis</h5><ul><li>Detection of arsenic, cadmium, lead and mercury in the sample. Testing for other metals can be arranged individually.</li></ul>

Arg-BPC-157 analysis

HPLC analysis of Arg-BPC-157 in tablets, capsules and raw API powders for identity confirmation, BPC-157 amount and peptide purity.

This analysis is designed to confirm the identity and determine the amount and peptide purity of Arg-BPC-157 in oral products and raw API powders. HPLC testing provides information about the BPC-157 content of the sample and the proportion of the main peptide component relative to chromatographically detectable impurities.<h4>Arg-BPC-157</h4>Arg-BPC-157 is a form of the BPC-157 peptide containing an arginine salt. The presence of the arginine salt distinguishes this product from standard BPC-157 and requires an appropriate analytical procedure.The analysis measures only the amount of BPC-157 itself. The amount of arginine or arginine salt is not included in the result.<blockquote>Samples that do not contain an arginine salt should be submitted for the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/2494">standard BPC-157 analysis</a> instead.</blockquote><h4>What the Analysis Determines</h4><ul><li>Identity of Arg-BPC-157</li><li>Amount of BPC-157 in the sample</li><li>Peptide purity</li><li>BPC-157 content per tablet or capsule</li><li>Optional mass-by-mass purity for raw API powders</li></ul><h4>Analysis Parameters</h4><ul><li>Target compound: Arg-BPC-157</li><li>Other name: BPC-157 with arginine salt</li><li>Testing method: HPLC</li><li>Detection limit: less than one twentieth of the usual dosage</li><li>Result format for oral products: mg per tablet or capsule and peptide purity</li><li>Alternative result format: m/m purity and peptide purity</li><li>Minimum oral sample: 3 tablets or capsules</li><li>Minimum raw API powder sample: 30 mg in a sealed glass vial to prevent moisture absorption</li><li>Average turnaround time: 7 business days</li></ul><blockquote><h5>Important Notice</h5>The reported amount refers exclusively to BPC-157. The arginine content and the total amount of Arg-BPC-157 including the arginine salt are not measured separately.The alternative m/m purity result format is intended exclusively for raw API powders. For tablets and capsules, the standard result format provides the amount of BPC-157 in mg per tablet or capsule together with peptide purity.</blockquote><h4>Additional Analyses</h4><h5>TFA Analysis</h5><ul><li>Detection and measurement of trifluoroacetic acid (TFA) in the sample. Results are reported in mg per vial.</li></ul><h5>Raw Data</h5><ul><li>Delivery of the available raw analytical data from the primary test and all applicable additional analyses.</li></ul><h5>Fentanyl Presence Analysis</h5><h5>Alternative Result Format – m/m Purity</h5><ul><li>Alternative reporting of the result as mass-by-mass purity. This option is intended exclusively for raw API powders.</li></ul><h5>Variance Testing</h5><ul><li>Analysis of multiple sample units to assess variation within a single batch. All submitted samples must originate from the same batch of the same product.</li></ul><h5>pH Measurement</h5><h5>Endotoxin Analysis</h5><ul><li>Measurement of bacterial endotoxins, particularly lipopolysaccharides (LPS), in the sample. This analysis is available only for finished products and should not be ordered for raw powders.</li><li>The standard test provides accurate results up to 10 EU per vial. Values above 10 EU per vial are estimated and require an additional test with a different dilution for precise determination. Sending two vials is therefore recommended.</li><li>Where endotoxin levels above 10 EU per vial are expected, the method can be calibrated for the higher range in advance.</li></ul><h5>CHNS Mass Report</h5><ul><li>Elemental analysis providing accurate measurement of nitrogen and sulphur content. The results can be used to determine Net Peptide Content (NPC).</li></ul><h5>Additional Report</h5><ul><li>A separate additional laboratory report issued under a different client name.</li></ul><h5>LC-MS Screening for Peptide Contamination</h5><ul><li>LC-MS screening for contamination with other peptides or peptide degradation products. Detection is limited to peptides included in the available testing portfolio.</li><li>The initial screening provides identification only. If contamination is detected, quantitative measurement may subsequently be ordered.</li></ul><h5>Sterility Testing</h5><ul><li>TAMC and TYMC testing checks the product for the presence of bacteria, yeasts and moulds. Additional unopened sample units must be submitted for analysis. The average turnaround time for this test is 14 days.</li></ul><h5>Heavy Metals Analysis</h5><ul><li>Detection of arsenic, cadmium, lead and mercury in the sample. Testing for other metals can be arranged individually.</li></ul>

BPC-157/TB-500 blend analysis

HPLC analysis of a BPC-157 and TB-500 blend for identity confirmation and quantification of both peptides. Results are reported in mg per vial.

This analysis is designed to confirm the identity and determine the amount of BPC-157 and TB-500 in a combined lyophilized sample. HPLC testing measures the content of both target peptides separately, with results reported in mg per vial.Peptide purity cannot be reliably determined in blends because impurities originating from the individual peptides may overlap and cannot be clearly attributed to a specific component.<h4>BPC-157 and TB-500</h4>BPC-157 is a synthetic peptide composed of 15 amino acids. TB-500 is a synthetic peptide associated with an active region of thymosin beta-4. This analysis is intended for samples containing both peptides in a single blend.<h4>What the Analysis Determines</h4><ul><li>Identity of BPC-157</li><li>Identity of TB-500</li><li>Amount of BPC-157 in the sample</li><li>Amount of TB-500 in the sample</li><li>Results reported in mg per vial</li></ul><h4>Analysis Parameters</h4><ul><li>Target compounds: BPC-157 and TB-500</li><li>Testing method: HPLC</li><li>Detection limit: less than one twentieth of the usual dosage per vial</li><li>Result format: mg per vial for each target peptide</li><li>Minimum sample amount: one whole unopened vial containing the lyophilizate</li><li>Average turnaround time: 7 business days</li></ul><blockquote><h5>Important Notice</h5>Peptide purity is not measured for BPC-157/TB-500 blends. Impurities from the two peptides may overlap in the chromatographic data and cannot be reliably assigned to the individual target compounds.The final report provides identification and separately measured amounts of BPC-157 and TB-500, but does not include peptide purity results.</blockquote><h4>Additional Analyses</h4><h5>TFA Analysis</h5><ul><li>Detection and measurement of trifluoroacetic acid (TFA) in the sample. Results are reported in mg per vial.</li></ul><h5>Raw Data</h5><ul><li>Delivery of the available raw analytical data from the primary test and all applicable additional analyses.</li></ul><h5>Fentanyl Presence Analysis</h5><h5>Variance Testing</h5><ul><li>Analysis of multiple sample units to assess variation within a single batch. All submitted samples must originate from the same batch of the same product.</li></ul><h5>pH Measurement</h5><h5>Endotoxin Analysis</h5><ul><li>Measurement of bacterial endotoxins, particularly lipopolysaccharides (LPS), in the sample. This analysis is available only for finished products and should not be ordered for raw powders.</li><li>The standard test provides accurate results up to 10 EU per vial. Values above 10 EU per vial are estimated and require an additional test with a different dilution for precise determination. Sending two vials is therefore recommended.</li><li>Where endotoxin levels above 10 EU per vial are expected, the method can be calibrated for the higher range in advance.</li></ul><h5>Additional Report</h5><ul><li>A separate additional laboratory report issued under a different client name.</li></ul><h5>LC-MS Screening for Peptide Contamination</h5><ul><li>LC-MS screening for contamination with other peptides or peptide degradation products. Detection is limited to peptides included in the available testing portfolio.</li><li>The initial screening provides identification only. If contamination is detected, quantitative measurement may subsequently be ordered.</li></ul><h5>Sterility Testing</h5><ul><li>TAMC and TYMC testing checks the product for the presence of bacteria, yeasts and moulds. Additional unopened sample units must be submitted for analysis. The average turnaround time for this test is 14 days.</li></ul><h5>Heavy Metals Analysis</h5><ul><li>Detection of arsenic, cadmium, lead and mercury in the sample. Testing for other metals can be arranged individually.</li></ul>

Products from category Pharmaceutical analyses - page 3

Related content

Shimadzu to Join ISC 2026 in Prague as Platinum Sponsor

Breaking Sensitivity Barriers: How MS³ is Transforming Biomarker Discovery for ALS and Beyond

Processing MS/MS Data in NIST26 Chromatogram Window