<div><p><strong>Purifying the target protein is crucial for investigating its specific properties and interactions with biomolecules like DNA, RNA, and other proteins. A range of purification strategies is available, and the optimal approach depends on factors such as the required scale, throughput, and downstream application. In many cases, the process must be fine-tuned through empirical optimization to achieve the desired purity and yield.</strong></p></div><div><div><div><div><h3><strong>What is Protein Purification?</strong></h3><p>Protein purification is a critical process in biotechnology and life sciences, aimed at isolating a specific protein from complex biological mixtures such as cell lysates or tissue extracts. The goal is to obtain a highly purified protein sample, free from contaminants like other proteins, nucleic acids, and lipids, to enable accurate analysis of its structure, function, and interactions.</p><p>This process is especially vital in biotechnological areas inside immunology and microbiology. In <strong>immunology</strong>, it underpins the production of vaccines, therapeutic antibodies, and diagnostic assays by enabling the isolation of key immune proteins and antibodies. It also supports the investigation of cell signaling and immune response mechanisms. In <strong>microbiology</strong>, purified proteins are essential for studying pathogens, identifying disease-related antigens, and driving drug discovery efforts. Ultimately, protein purification is fundamental to the development of targeted vaccines, innovative diagnostics, and effective therapeutic strategies.</p></div></div></div></div><div><div><div><div><h3><strong>Types of Protein Purification Methods</strong></h3></div></div></div></div><div><p>There are several types of protein purification methods, each chosen based on the protein’s characteristics such as size, charge, solubility, and binding affinity. Below are some commonly used methods:</p></div><div><div><div><div><h4><strong>Non-Chromatographic Approaches</strong></h4></div></div><div><p>Non-chromatographic approaches use simpler physicochemical principles—such as solubility, molecular size, or diffusional properties—to separate and purify proteins. These techniques are often employed as initial purification or concentration steps before further refinement.</p><h5><strong>Precipitation Techniques</strong></h5><p>Protein precipitation is a widely used approach in purification workflows, typically relying on one of three main methods:</p><ul><li><strong>Organic solvent precipitation</strong> involves adding solvents like ethanol or acetone to lower the solution's dielectric constant. This promotes protein–protein interactions, reducing solubility and leading to aggregation and precipitation.</li><li><strong>Isoelectric point precipitation </strong>exploits the pH at which a protein carries no net charge. At this point, solubility is minimized, causing the protein to precipitate from solution.</li><li><strong>Nonionic polymer precipitation</strong> uses polymers such as dextran, polyethylene glycol (PEG), or NPEP to alter the solution’s physical properties. These agents create crowding effects that promote protein aggregation without directly binding to the proteins.</li></ul><h5><strong>Dialysis</strong></h5><p>Dialysis involves placing a protein solution inside a semi-permeable membrane that allows water and ions to pass while the protein remains inside, facilitating buffer exchange.This method is commonly used during protein expression and purification workflows for buffer exchange, desalting, and removal of unwanted small molecules such as imidazole, urea, or ammonium sulfate. The process helps maintain protein stability and activity by gradually equilibrating the sample with the desired buffer conditions.</p><h5><strong>Immunocapture (Magnetic Bead-Based Purification</strong></h5><p>Immunocapture uses antibodies immobilized on solid supports like magnetic beads to selectively bind and isolate a target protein. This method is highly specific and particularly useful for low-abundance targets or small-scale prep, such as:</p><ul><li>Pulling down proteins from complex mixtures</li><li>Capturing tagged recombinant proteins (e.g., FLAG, HA, or His tags)</li><li>Enrichment before western blotting, MS, or ELISA</li></ul><p>Magnetic beads offer speed, ease of use, and minimal sample loss, making them ideal for lab-scale workflows.</p><p><a target="_blank" rel="noopener noreferrer" href="https://www.phenomenex.com/products/biozenspe-sample-preparation-products/biozen-magbeads">Biozen MagBeads</a> provide a fast and efficient method for purifying, isolating, and cleaning up monoclonal antibodies (mAbs), proteins, and peptides. These paramagnetic beads feature a streptavidin-coated surface, enabling high-affinity binding in immuno-based workflows. Compared to traditional sample preparation techniques, magnetic bead-based immunocapture offers greater speed and consistency by delivering high binding capacity with uniform particle size, ensuring accurate and reproducible results in significantly less time.</p><h5><strong>Centrifugation</strong></h5><p>Centrifugation of crude protein mixtures is an essential step in the investigation of protein purification and aggregation. Outlined below are the various types of centrifugations employed in protein purification.</p><p><strong>Preparative Ultracentrifugation</strong><br>Ultracentrifugation is an effective method of purifying proteins from aggregates based on their size, shape and density. Centrifugation, widely recognized as a robust and versatile method, is commonly used to separate complex mixtures of cellular components. Ultracentrifuges separate small particles by spinning at high speeds, utilizing centrifugal force based on size and density.</p><p><strong>Differential Centrifugation</strong><br>Differential centrifugation operates by separating components based on differences in size and density, using varying speeds of centrifugation to achieve this. Its resolving power ranges from low to medium. A key advantage of this technique is its convenience for processing multiple samples simultaneously, making it effective for purifying crude samples. Additionally, it preserves cell viability and maintains the natural distribution of hematopoietic cell populations.</p><p><strong>Rate-zonal Gradient Centrifugation</strong><br>This technique separates components based on their sedimentation rate within a medium that contains a density gradient. It offers medium resolving power and is particularly effective for separating multiple components in complex mixtures with high precision. It is also considered a cost-effective and widely used technique in molecular biology and biochemistry.</p><p><strong>Isopycnic Centrifugation (Equilibrium Centrifugation)</strong><br>Isopycnic centrifugation is an advanced protein purification method that relies on the principle of separating particles according to their intrinsic buoyant density, irrespective of their size or morphology. During the process, proteins migrate through a density gradient until they equilibrate at a position where their density matches that of the surrounding medium, resulting in precise separation without further sedimentation.</p></div></div></div><div><div><div><div><h4><strong>Chromatographic Approaches</strong></h4><p>Chromatography is a common method of protein purification and is based on the separation of molecules in a mixture as they move through a stationary phase and a mobile phase. Outlined below are the various types of chromatography employed in protein purification.</p><h5><strong>Ion Exchange Chromatography</strong></h5><p><a target="_blank" rel="noopener noreferrer" href="https://www.phenomenex.com/techniques/hplc-ion-exchange">Ion exchange chromatography</a> relies on the interaction between a charged stationary phase and oppositely charged analytes, with cation exchange chromatography attracting positively charged molecules to a negatively charged stationary phase. Successful application of this technique requires careful selection of the appropriate ion exchange column, buffer pH, and salt concentration. This approach is often used in the biopharmaceutical industries as mAb polishing steps, viral clearance and charge variant analyses as part of the product quality control.</p><p><a target="_blank" rel="noopener noreferrer" href="https://www.phenomenex.com/">Phenomenex</a> offers a range of protein purification columns. Their ion exchange chromatography solutions include:&nbsp;</p><ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1526"><strong>Luna SCX </strong></a>for strong selectivity of positively charged compounds, such as peptides</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1540"><strong>Biozen WCX</strong></a> for efficient separation of proteins such as monoclonal antibodies charged variants</li><li><a target="_blank" rel="noopener noreferrer" href="https://www.phenomenex.com/part/00g-3151-e0">PhenoSphere SAX</a>, a strong anion-exchanger with fully porous 80Å particles, particularly useful for small molecules such as nucleotides</li></ul><h5><strong>Size Exclusion Chromatography</strong></h5><p><a target="_blank" rel="noopener noreferrer" href="https://www.phenomenex.com/techniques/hplc-sec">Size exclusion chromatography (SEC)</a> separates molecules based on their size, with larger analytes eluting first due to their exclusion from the pores in the column packing material, while smaller molecules are able to enter the pores, facing a longer travelling path, and hence, eluting later. This method can be categorized into aqueous SEC (gel filtration chromatography, GFC) for analyzing biomolecules such as proteins and antibodies. This type of chromatography is widely used as an analytical tool for quality control in the biopharmaceutical industry and can also be an approach of choice for polishing steps.</p><p>Phenomenex offers a range of <strong>Biozen columns for SEC</strong> separations. In the case of mAbs, <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1534"><strong>Biozen dSEC-2</strong></a> and<a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1537"><strong> Biozen dSEC-7 </strong></a>columns are the top choices for monoclonal antibody (mAb) analysis, delivering high-resolution separation of monomers, aggregates, and fragments formed during mAb manufacturing, processing, or storage. The dSEC-7 column, featuring a larger pore size and optimized particle design, extends the dynamic range to accommodate larger biomolecules and complex biotherapeutics.</p><p>For more general applications, <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1533"><strong>Biozen SEC-2</strong></a><strong> </strong>and <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1532"><strong>Biozen SEC-3</strong></a> phases cover different MW ranges for high-efficiency separation of biomolecules (e.g., proteins and antibodies). Additionally, the BioSep and Yarra lines become top choices when looking for preparative scale columns.</p><h5><strong>Reversed-Phase Chromatography</strong></h5><p><a target="_blank" rel="noopener noreferrer" href="https://www.phenomenex.com/techniques/hplc-reversed-phase">Reversed-phase chromatography</a>, the most common mode in high-performance liquid chromatography/ ultra-high-performance liquid chromatography (HPLC/UHPLC), separates compounds based on hydrophobic and van der Waals interactions using alkyl (C18, C8, C4) stationary phases or other hydrophobic polymers. For large biomolecules such as proteins and peptides, <a target="_blank" rel="noopener noreferrer" href="https://www.phenomenex.com/resources/blog/wider-pore-biozen-column">wide-pore</a> (typically 300 Å) C4, C8 and C18 columns are ideal, as the larger pore size allows better accessibility of the protein molecules to the stationary phase surface, improving mass transfer and peak shape during separation.</p><p>The Biozen line from Phenomenex offers a wide range of HPLC/UHPLC columns for the analysis of biomolecules.These include phases optimized for high-resolution analysis of intact proteins (Native-RP, Widepore C4, Intact XB-C8) and peptides (Peptide PS-C18, Peptide XB-C18 and Peptide Polar-C18). Kinetex could also be an option when looking for more selectivities for the analysis of peptides and small proteins. Additionally, when aiming to preparative scale processes, several of these media are also available in Phenomenex Axia formats to easily up-scale your separations.</p><h5><strong>Hydroxyapatite Chromatography</strong></h5><p>Hydroxyapatite chromatography (HAC) is a sophisticated mixed-mode chromatographic technique that exploits the unique properties of hydroxyapatite (Ca10(PO4)6(OH)2), utilizing both cation-exchange interactions via its phosphate groups and metal affinity through its calcium sites to achieve highly selective protein separations.</p><p>Renowned for its efficacy in resolving complex biomolecular separations, HAC excels in tasks like aggregate removal from monoclonal antibodies, surpassing the capabilities of traditional single-mode chromatographic methods such as ion-exchange or hydrophobic interaction chromatography.</p><h5><strong>Hydrophobic Interaction Chromatography</strong></h5><p>Hydrophobic interaction chromatography (HIC) is a method of protein purification that separates molecules based on their hydrophobicity, using high-salt buffers to promote protein-ligand interactions while maintaining the protein's biological activity. The process involves gradually reducing the salt concentration to elute proteins in order to increase hydrophobicity, making it effective for purifying target molecules and removing impurities or aggregates, making it a valuable approach for intermediate and polishing steps during purification processes.</p><h5><strong>Affinity Chromatography</strong></h5><p>Affinity chromatography is a powerful and highly selective technique used to purify biomolecules based on specific, reversible interactions between a target molecule and an immobilized ligand. In many cases, recombinant proteins are engineered with affinity tags—such as His-tags or GST-tags—that facilitate binding to complementary ligands on the chromatography matrix.</p><p>This method offers the advantage of achieving several thousand-fold purifications in a single step while preserving the biological activity of the protein. It is widely employed for purifying enzymes, antibodies, and antigens, using a variety of ligands including specific antibodies, enzymes, and multifunctional compounds like concanavalin A and triazine dyes.</p></div></div></div></div>

Exploring Protein Purification Methods: Essential Techniques for Accurate Results

<h3><span><strong>A Practical Guide to Getting the Most from Syringe Filters: Tips, Tricks, and Common Pitfalls</strong></span></h3><p><span><strong>Syringe filters play a crucial role in chromatography and many other laboratory applications by removing particulate matter before analysis. Proper sample filtration helps protect analytical instruments, extends column lifetime, and improves data quality. However, selecting an unsuitable filter—or using one incorrectly—can introduce contamination, reduce filtration efficiency, or even compromise analytical results. The following recommendations will help you avoid common mistakes and ensure reliable filtration every time.</strong></span></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Avoiding_Common_Syringe_Filter_Mistakes_3_150e8c1c2b.webp" alt="KNAUER: Avoiding Common Syringe Filter Mistakes" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Avoiding_Common_Syringe_Filter_Mistakes_3_150e8c1c2b.webp 133w," sizes="100vw" width="1276" height="1496"></p><h4><span><strong>1. Improper Filter Handling</strong></span></h4><p><span>Using excessive force during filtration or attempting to reuse disposable syringe filters can damage the membrane and increase the risk of sample contamination.</span></p><ul><li><span><strong>Solution:</strong> Apply slow, even pressure throughout the filtration process and always dispose of single-use filters after one use. If the flow rate decreases noticeably, replace the filter instead of applying additional force.</span></li></ul><h4><span><strong>2. Selecting an Inappropriate Pore Size</strong></span></h4><p><span>Using the wrong pore size may either fail to remove unwanted particles or cause the membrane to clog prematurely, reducing filtration efficiency.</span></p><ul><li><span><strong>Solution:</strong> A 0.45 µm membrane is generally suitable for routine particulate removal, while a 0.22 µm membrane is recommended for finer filtration and bacterial removal. Samples with higher viscosity may require a pre-filter to prevent rapid clogging. It is also important to consider the intended analytical technique. For example, 0.22 µm filters are typically preferred for UHPLC and LC-MS applications, whereas 0.45 µm filters are often sufficient for conventional HPLC analyses.</span></li></ul><h4><span><strong>3. Choosing the Wrong Membrane Material</strong></span></h4><p><span>Different membrane materials exhibit different chemical resistance. Using an incompatible membrane may lead to degradation of the filter, sample contamination, or complete filtration failure.</span></p><ul><li><span><strong>Solution:</strong> Always verify solvent compatibility before filtration. PTFE membranes are an excellent choice for organic solvents, while PES and nylon membranes are better suited to aqueous samples. If compatibility is uncertain, perform a small-scale trial before filtering valuable samples.</span></li><li><span><strong>Pro Tip:</strong> For additional guidance, see our blog article <strong>"How to Choose the Right Membrane for your Syringe Filter"</strong>, which provides a detailed comparison of membrane materials and their recommended applications.</span></li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Avoiding_Common_Syringe_Filter_Mistakes_2_e47021fb11.jpg" alt="KNAUER Sepapure® Syringe Filters are available with multiple membrane materials, each identified by a dedicated color code for quick and reliable selection." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Avoiding_Common_Syringe_Filter_Mistakes_2_e47021fb11.jpg 245w," sizes="100vw" width="1580" height="902"></p><h4><span><strong>4. Ignoring Filter Capacity</strong></span></h4><p><span>Using a filter with insufficient capacity can result in rapid membrane blockage, increasing filtration time and reducing laboratory productivity.</span></p><ul><li><span><strong>Solution:</strong> When filtering larger sample volumes, choose high-capacity syringe filters or introduce a pre-filtration step. Never force liquid through a clogged membrane, as doing so may damage the filter and negatively affect sample quality.</span></li></ul><h4><span><strong>5. Overlooking Sample Adsorption</strong></span></h4><p><span>Certain membrane materials may adsorb analytes of interest, leading to lower recoveries and potentially affecting quantitative results.</span></p><ul><li><span><strong>Solution:</strong> For protein samples or other adsorption-sensitive analytes, select membranes with low binding characteristics, such as nylon or glass fiber, whenever appropriate. Performing a small recovery test before routine analysis can help identify potential analyte losses.</span></li></ul><h4><span><strong>6. Failing to Optimize Filtration Performance</strong></span></h4><p><span>Slow filtration is more than just an inconvenience—it often indicates that the filtration conditions are not optimal.</span></p><ul><li><span><strong>Solution:</strong> If filtration becomes unusually slow, investigate possible causes such as membrane clogging, excessive sample viscosity, or an unnecessarily small pore size. Depending on the sample, dilution or sequential filtration using progressively finer filters may significantly improve performance.</span></li></ul><h4><span><strong>Final Thoughts</strong></span></h4><p><span>Selecting the appropriate syringe filter is a straightforward process, but overlooking small details can have a significant impact on analytical performance. Choosing the correct membrane material, pore size, and filtration strategy helps improve laboratory efficiency, protects chromatography systems and columns, and contributes to accurate, reproducible analytical results.</span></p><p><span>With the right syringe filter and proper filtration technique, you can minimize sample preparation problems and maximize confidence in every analysis.</span></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Avoiding_Common_Syringe_Filter_Mistakes_4_983a15e289.jpg" alt="KNAUER: Sepapure® Syringe Filter Selection" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Avoiding_Common_Syringe_Filter_Mistakes_4_983a15e289.jpg 245w," sizes="100vw" width="1160" height="627"></p><p><span><strong>Happy filtering!</strong></span></p>

Avoiding Common Syringe Filter Mistakes

News from LabRulezLCMS Library - Week 27, 2026

Article

Product

Application

Academy

Poster

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Phenomenex is a global technology leader committed to developing novel analytical chemistry solutions that solve the separation and purification challenges of researchers in industrial, government and academic laboratories.

Phenomenex

Based in Berlin, KNAUER is a medium-sized, owner-managed company that has been serving the sciences since 1962. We develop and manufacture scientific instruments of superior quality for liquid chromatography, including: Analytical HPLC/UHPLC, Preparative HPLC, Fast protein liquid chromatography (FPLC), Multi-column chromatography/Simulated moving bed (SMB) chromatography. High pressure dosing, in-line detection systems, and osmometry are additional business areas.

KNAUER

Watrex Deltasil 100 C18 HPLC columns

Need a high quality column at an affordable price? Deltasil™ columns are filled with standard reversed phase for a wide range of applications.

<p><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/?s=watrex+deltasil+100+C18&amp;post_type=product&amp;dgwt_wcas=1?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>Watrex DeltaSil™ 100 C18</strong></a><strong> column is a standard reversed phase for wide field of applications in analysis</strong><br><strong>of drugs, organic compounds, peptides and others.</strong></p><p>Stationary phase is based on <strong>synthetic 5 μm silica-gel with 100 Å pores and 15% carbon content</strong>. The column has a good peak symmetry and efficiency.</p><p>Theoretical plate count value for non-polar compounds, such as naphthalene, reaches <strong>up to 90.000 theoretical plates per meter</strong>.</p><p>A <strong>wide range of column sizes</strong> is available, with additional dimensions available on request.</p><p>We are committed to the <strong>sustainability</strong> of our columns and therefore also offer <strong>backfill</strong>.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Watrex_Deltasil_HPLC_column_Mobile_phase_85_ACN_Flowrate_0_65_mlmin_Pressure_54_bar_Detection_254_nm_Injection_2_ml_de7068538f.jpg" alt="Watrex: Watrex Deltasil HPLC column (Mobile phase 85% ACN; Flowrate 0.65 mlmin; Pressure 54 bar; Detection 254 nm; Injection 2 μl)"></p><h3><strong>Ordering information:</strong></h3><h5><strong>PN/Component:</strong></h5><ul><li><strong>WI02DC181254</strong> Watrex Deltasil™ 100 C18, 5 μm, 125x4 mm column (<strong>Price 234 € ex VAT</strong>)</li><li><strong>WI02DC181504 </strong>Watrex Deltasil™ 100 C18, 5 μm, 150x4 mm column (<strong>Price 234 € ex VAT</strong>)</li><li><strong>WI02DC1815046</strong> Watrex Deltasil™ 100 C18, 5 μm, 150x4,6 mm column</li><li><strong>WI02DC182504</strong> Watrex Deltasil™ 100 C18, 5 μm, 250x4 mm column (<strong>Price 296 € ex VAT</strong>)</li><li><strong>WI02DC1825046</strong> Watrex Deltasil™ 100 C18, 5 μm, 250x4,6 mm column</li><li><strong>WI02DC182508</strong> Watrex Deltasil™ 100 C18, 5 μm, Semi-prep 250x8 mm column (<strong>Price 482 € ex VAT</strong>)</li></ul>

Watrex Polymer IEX HPLC columns

Do you need HPLC columns for the determination of organic acids, alcohols and sugars? Columns filled with a monodisperse sorbent based on sulfonated styrenedivinylbenzene.

<p><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/?s=watrex+polymer+iex&amp;post_type=product&amp;dgwt_wcas=1?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>Watrex Polymer IEX™</strong></a><strong> is the Europe’s leading sorbent for ion exclusion analysis of alcohols, carboxylic acids, sugars, and polysacharides</strong></p><ul><li>H⁺, Ca²⁺, Pb²⁺ and Na⁺ forms</li><li>Unique monodispersed sorbent based on sulfonated polystyrene</li><li>Bulk packing materials available</li></ul><h3><strong>H form</strong></h3><p>The hydrogen form is suitable for <strong>organic acids</strong>, <strong>alcohols</strong> and <strong>some sugars</strong> in natural materials. The column is particularly suitable for the analysis of <strong>fruit drinks</strong>, <strong>wine</strong>, etc. Its great advantage is the high stability of retention times and the wide concentration range of analytes.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Column_250x8mm_IEX_H_4da682fa13.jpg" alt="Watrex: Column 250x8mm IEX H"></p><h3><strong>Ca form</strong></h3><p>The calcium form is characterized by good selectivity for the separation of <strong>mono-</strong> and <strong>disaccharides</strong> in natural materials. The column must be protected from anions forming insoluble calcium salts (phosphates, sulphates, etc.) and cations with a higher affinity for the sorbent than calcium ions.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Column_250x8mm_IEX_Ca_b840dddcce.jpg" alt="Watrex: Column 250x8mm IEX Ca"></p><h3><strong>Pb form</strong></h3><p>The lead form is suitable for the separation of <strong>mono-</strong> and <strong>disaccharides</strong> in natural materials. The column must be protected from anions forming insoluble lead salts (phosphates, sulphates, etc.) and cations with a higher</p><p>Use the appropriate <strong>pre-column to extend the life</strong> of the analytical column.</p><h3><strong>Ordering information:</strong></h3><h5><strong>PN/Component:</strong></h5><ul><li><strong>WI020223</strong> Watrex 300x8 mm Polymer IEX H form, 8 um</li><li><strong>WI020213</strong> Watrex 300x8 mm Polymer IEX Ca form, 8 um</li><li><strong>WI020253</strong> Watrex 300x8 mm Polymer IEX Pb form, 8 um</li><li><strong>WI02022</strong> Watrex 250x8 mm Polymer IEX H form, 8 um (<strong>Price 926 € ex VAT</strong>)</li><li><strong>WI02021</strong> Watrex 250x8 mm Polymer IEX Ca form, 8 um (<strong>Price 926 € ex VAT</strong>)</li><li><strong>WI02025</strong> Watrex 250x8 mm Polymer IEX Pb form, 8 um (<strong>Price 926 € ex VAT</strong>)</li><li><strong>WI02122</strong> Guard column insert 10x4.0 mm PEEK Polymer IEX H 8 um, 10 pcs</li><li><strong>WI02121</strong> Guard column insert 10x4.0 mm PEEK Polymer IEX Ca 8 um, 10 pcs</li><li><strong>WI029012</strong> Guard column holder (for 10x4.0 mm PEEK insert)</li></ul>

Watrex IonPlus HPLC columns

Do you perform cation or anion analysis and need the right column at an affordable price? Our Watrex IonPlus™ columns are just what you are looking for!

<p>Watrex IonPlus™ are special columns for <strong>ion chromatography</strong>. The matrix used is <strong>styrene-divinylbenzene based</strong> and can withstand higher organic modifier content in the mobile phase.</p><h3><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/chromatography/hplc-columns/watrex-columns/ion-exchange/watrex-ionplus-cs19-ic-column-250x46mm/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>Watrex IonPlus™ CS19</strong></a></h3><ul><li>Styrene-divinylbenzene, 55% cross-linking (7 μm particle i.d.)</li></ul><p>The Watrex IonPlus™ CS19 is an optimized column designed for the separation of <strong>common cations</strong>, small <strong>polar amines</strong> and moderately <strong>hydrophobic</strong> and <strong>polyvalent cations</strong> using simple aqueous eluents and elevated temperatures. They provide excellent separation of <strong>alkali metals</strong>, <strong>alkaline earth metals</strong>, <strong>alkylamines</strong>, <strong>alkanolamines</strong> and <strong>biogenic amines</strong>.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/HPLC_kolona_Watrex_Ion_Plus_CS_19_738c29ff57/HPLC-kolona-Watrex-IonPlus-CS19.png" alt="Watrex: Separation of anions in a Watrex IonPlus CS19 HPLC column"></p><h3><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/chromatography/hplc-columns/watrex-columns/ion-exchange/watrex-ionplus-as19-ic-column-250x46mm/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>Watrex IonPlus™ AS19</strong></a></h3><ul><li>Styrene-divinylbenzene, 55% cross-linking (12 μm particle i.d.).</li></ul><p>Watrex IonPlus™ AS19 is a column analyzing common <strong>inorganic anions</strong> including <strong>fluorides</strong>, <strong>chlorites</strong>, <strong>bromates</strong>, <strong>chlorides</strong>, <strong>nitrates</strong>, <strong>phosphates</strong> and <strong>sulphates</strong> in drinking, underground and waste water or other matrices.</p><h3><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/chromatography/hplc-columns/watrex-columns/ion-exchange/watrex-150x4mm-ic-anion-i-7um/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>Watrex IC Anion I</strong></a></h3><ul><li>Styrene-divinylbenzene (7 μm particle i.d.)</li></ul><h3><strong>Ordering information:</strong></h3><h5><strong>PN/Component:</strong></h5><ul><li><strong>WCS19250046</strong> Watrex IonPlus™ CS19 IC Column 250x4,6mm, 7 um (<strong>Price 1 169 € ex VAT</strong>)</li><li><strong>WCS19150030</strong> Watrex IonPlus™ CS19 IC Column 150x3mm, 7 um</li><li><strong>WCS19150040</strong> Watrex IonPlus™ CS19 IC Column 150x4mm, 7 um</li><li><strong>WCS19250030</strong> Watrex IonPlus™ CS19 IC Column 250x3mm, 7 um</li><li><strong>WAS19250046</strong> Watrex IonPlus™ AS19 IC Column 250x4,6mm, 7 um (<strong>Price 1 090 € ex VAT</strong>)</li><li><strong>WAS19150030</strong> Watrex IonPlus™ AS19 IC Column 150x3mm, 7 um</li><li><strong>WAS19150040</strong> Watrex IonPlus™ AS19 IC Column 150x4mm, 7 um</li><li><strong>WAS19250030</strong> Watrex IonPlus™ AS19 IC Column 250x3mm, 7 um</li><li><strong>WAS1925046</strong> Watrex IonPlus™ AS19 IC Column 250x4.6mm, 12 μm</li><li><strong>WI021540</strong> Watrex IC Anion I 150x4mm, 7 μm (<strong>Price 731 € ex VAT</strong>)</li><li><strong>CAT12546</strong> WATREX 125×4.6mm Universal Cat II, 7um (<strong>Price 584 € ex VAT</strong>)</li></ul>

Thermo Scientific Hypersil GOLD C18 Selectivity HPLC Columns

Achieve exceptional peak shape and resolution for your HPLC and LC/MS applications with Thermo Scientific™ Hypersil GOLD™ HPLC columns. 

<p><strong>Achieve exceptional peak shape and resolution for your HPLC and LC/MS applications with Thermo Scientific™ Hypersil GOLD™ HPLC columns.</strong> These endcapped, ultrapure, silica-based columns deliver significant reduction in peak tailing using generic gradients with C18 selectivity. With their excellent resolution, efficiency, and sensitivity, Hypersil GOLD columns give you confidence in the accuracy and quality of your analytical data.</p><h5><strong>Novel Bonding</strong></h5><ul><li>Proprietary derivatization and endcapping</li><li>C18 (USP L1) selectivity</li></ul><h5><strong>pH Stability</strong></h5><ul><li>Robust performance at high pH</li><li>Excellent column stability at low pH</li></ul><h5><strong>Flexible Formats</strong></h5><ul><li>Javelin HTS columns for high-throughput screening</li><li>Semi-preparative columns with 12 μm particles available</li></ul><h4><strong>About the Hypersil GOLD Family of HPLC Columns</strong></h4><p>Meet the challenges of modern chromatography with state-of-the-art columns that provide outstanding performance and consistent separations. Twelve different column chemistries are available so you can optimize separations and maximize productivity. Get outstanding peak shapes in reversed phase, ion exchange, HILIC, or normal phase chromatography.</p><ul><li>Excellent peak symmetry</li><li>Narrow peaks for outstanding efficiency</li><li>Enhanced sensitivity and improved resolution</li><li>Exceptional reproducibility for reliable chromatography, column after column</li><li>Solutions for high-throughput screening</li><li>1.9, 3, and 5 μm particle sizes for all your separation needs</li></ul><h4><strong>Specifications</strong></h4><ul><li><strong>Endcapped:</strong> Yes</li><li><strong>For Use With:</strong> LC/MS</li><li><strong>Max. Pressure: </strong>5800 psi (400 bar)</li><li><strong>Packing Material:</strong> Spherical, Fully Porous, Ultrapure Silica</li><li><strong>Stationary Phase:</strong> C18 Selectivity</li><li><strong>Surface Area:</strong> 220 m²/g</li><li><strong>Temperature:</strong> 60°C</li><li><strong>USP Type: </strong>L1</li><li><strong>Carbon Load</strong>: 11%</li><li><strong>Phase:</strong> Reversed Phase</li><li><strong>Pore Size: </strong>175 Å</li><li><strong>pH: </strong>1 to 11</li></ul>

Thermo Scientific Accucore Biphenyl Reversed Phase HPLC Columns

Choose Thermo Scientific™ Accucore™ Biphenyl LC Columns for fast and reliable separation of critical pairs and isomers.

<p><strong>Choose Thermo Scientific™ Accucore™ Biphenyl LC Columns for fast and reliable separation of critical pairs and isomers. These columns provide unique selectivity for aromatic and moderately polar analytes. Their optimized packing offers a rugged platform for a variety of matrices. Based on Core Enhanced Technology, Accucore liquid chromatography reversed phase columns provide fast, high-resolution separations without the elevated backpressures seen using sub-2μm particles.</strong></p><ul><li>Fast separations with excellent resolution and sensitivity</li><li>Lower backpressures so that UHPLC is not required</li><li>Mixed-mode selectivity for aromatic and moderately polar analytes</li><li>Enhanced Pi-pi interactions with aromatics</li><li>Excellent lot-to-lot reproducibility</li></ul><p>Trust your separation of critical pairs and isomers to Accucore Biphenyl LC Columns. These columns offer fast run times, excellent robustness, and consistent reproducibility, and provide the perfect balance of polar analyte retention and hydrophobic analyte elution.</p><h4><strong>Specifications</strong></h4><ul><li><strong>Endcapped:</strong> Yes</li><li><strong>For Use With:</strong> HPLC/UHPLC</li><li><strong>Max. Pressure: </strong>8700 psi (600 bar)</li><li><strong>Packing Material:</strong> Spherical, Solid Core, Ultrapure Silica</li><li><strong>Particle Shape:</strong> Spherical Solid Core</li><li><strong>Stationary Phase:</strong> Biphenyl</li><li><strong>Surface Area:</strong> 130 m²/g</li><li><strong>Temperature:</strong> 70°C</li><li><strong>USP Type: </strong>L11</li><li><strong>Carbon Load</strong>: 6%</li><li><strong>Phase:</strong> Reversed Phase</li><li><strong>Pore Size: </strong>80 Å</li><li><strong>pH: </strong>2 to 8</li></ul>

Thermo Scientific Accucore Vanquish C18+ UHPLC Columns

Choose Thermo Scientific™ Accucore™ Vanquish™ C18+ UHPLC columns, containing uniquely efficient 1.5 μm solid core particles for use with the Thermo Scientific™ Vanquish™ UHPLC system

<p><strong>Choose Thermo Scientific™ Accucore™ Vanquish™ C18+ UHPLC columns, containing uniquely efficient 1.5 μm solid core particles for use with the </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products?category=40&amp;manufacturerItems=3"><strong>Thermo Scientific™ Vanquish™ UHPLC system</strong></a>. Founded on state-of-the-art Core Enhanced Technology™, this sub-2 μm particle next-generation column has ultra-short diffusion paths that result in extremely efficient separations. This high efficiency enables fast separation and the resolution of complex mixtures. In concert with Vanquish systems, these columns deliver more results with better separations, thereby enhancing workflows and productivity.</p><h4><strong>Specifications</strong></h4><ul><li><strong>Endcapped:</strong> Yes</li><li><strong>For Use With:</strong> UHPLC</li><li><strong>Max. Pressure: </strong>21756 psi (1500 bar)</li><li><strong>Packing Material:</strong> Spherical, Solid Core, Ultrapure Silica</li><li><strong>Particle Shape:</strong> Spherical Solid Core</li><li><strong>Stationary Phase:</strong> C18</li><li><strong>Surface Area:</strong> 110 m²/g</li><li><strong>Temperature:</strong> 70°C</li><li><strong>USP Type: </strong>L1</li><li><strong>Carbon Load</strong>: 6.5%</li><li><strong>Phase:</strong> Reversed Phase</li><li><strong>Pore Size: </strong>80 Å</li><li><strong>pH: </strong>2 to 9</li></ul>

Products from category Analytical HPLC columns focused on LC columns - page 17

Related content

News from LabRulezLCMS Library - Week 27, 2026

Avoiding Common Syringe Filter Mistakes

Exploring Protein Purification Methods: Essential Techniques for Accurate Results