An international research team, which included scientists from the Faculty of Science at Palacký University and the Institute of Physics of the Czech Academy of Sciences, has succeeded in unraveling the complex mechanism by which a chemical bond is formed during a collision between molecules. The experts found that the reaction only takes place if the molecules are oriented towards each other within a very narrow range of angles – within the so-called cone of reaction. This joint research has thus provided an answer to one of the fundamental questions of chemistry: under what conditions do chemical bonds form between molecules. The results of the study&nbsp;Spatially resolving the cone of reaction for a single molecule&nbsp;were published in the prestigious scientific journal&nbsp;Science.Many chemical reactions begin with the collision of two particles. However, for a new chemical bond to form, it is not enough for the molecules simply to come into contact. Their collision must occur with sufficient energy, in the correct relative orientation and at the right location. Under normal conditions, such as in solutions or gases, molecules collide chaotically, and the precise parameters of these collisions cannot therefore be controlled.<h4>Molecules under control</h4>Scientists were able to control the collisions of individual molecules on a copper surface and monitored the process using a scanning tunnelling microscope. They used the instrument not only to visualise individual molecules, but also to deliberately accelerate the reactants towards one another. They subsequently analysed each collision with atomic-level resolution. This enabled them to determine unequivocally whether a new chemical bond had formed between the molecules.<h5>“What is hidden in the statistics of billions of collisions in conventional chemistry, we have managed to break down into individual cases and map directly.” Adam Matěj</h5>A key finding of the study is that the outcome of a collision is determined by the extremely precise orientation of the molecules. A new bond was formed only when the target molecule was oriented within a few degrees of the direction of movement of the other molecule. When rotated by more than fifteen degrees, the molecules simply bounced off each other without any reaction.<h4>The precise orientation of the molecules is crucial</h4>“For the first time, we were able to observe, using a single molecule, exactly how precisely it must be oriented for the reaction to take place at all. What is hidden in the statistics of billions of collisions in conventional chemistry, we have managed to break down into individual cases and map directly,” said Adam Matěj from the Department of Physical Chemistry at the Faculty of Science.The theoretical part of the study, in which researchers from Palacký University and the Institute of Physics of the Czech Academy of Sciences were involved, played a significant role. Using quantum-mechanical calculations, they explained why the ‘reaction cone’ is so narrow. It turned out that the reactive carbon atom is surrounded by hydrogen atoms, which block the access of the reacting molecule from almost all directions.<h4>The arrangement of atoms restricts access to the reaction</h4>The calculations also shed light on a surprising experimental result. The chemical reaction took place even when the molecule moved along an adjacent row of copper atoms, where, according to the original assumptions, no bond should have formed.<h5>“The strength of this work lies in the fact that the experiment and theory have been brought together into a single picture. The microscope showed what happens during the collision, and the calculations explained why.” Pavel Jelínek</h5>“The explanation lies in the slight displacement of a single copper atom on the surface. The target’s bond to the surface pulls it out of its position and brings it close enough to the neighbouring row that it can literally take over the projectile and direct it to the correct spot. This shows that the surface is not merely a passive substrate, but actively participates in the reaction itself and can even facilitate pathways that would otherwise be unfavourable,” noted Adam Matěj.<h4>The surface also determines the course of the reaction</h4>The results are significant for the development of so-called surface reactions, in which new materials and nanostructures are purposefully assembled from individual molecules. A better understanding of the influence of the spatial arrangement of molecules will enable the design of molecular building blocks so that they bond more reliably and efficiently. This represents an important step towards the development of technologies based on the controlled construction of structures atom by atom.“The strength of this work lies in the fact that experiment and theory have been brought together into a single picture. The microscope showed what happens during the collision, and the calculations explained why. Without a theoretical model, we would have found it difficult to discover that the movement of a single surface atom is behind the unexpected course of the reaction,” added Pavel Jelínek from the Institute of Physics of the Czech Academy of Sciences.<blockquote>The study&nbsp;Spatially resolving the cone of reaction for a single molecule&nbsp;was produced in collaboration between researchers from the University of Graz, the Institute of Physics of the Czech Academy of Sciences, Palacký University in Olomouc, Charles University and Humboldt University in Berlin.</blockquote>

Scientists reveal when chemical bonds form in molecular collisions 

In our <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/article/7741">previous article, we introduced the main types of detectors used in HPLC</a>. This time, we take a closer look at the performance characteristics of LC detectors and the specifications that should be considered when assessing whether a detector is suitable for a particular chromatographic separation. We will also compare the most common detector technologies and provide some practical guidance for choosing the right option for a specific application.<h3>What Defines an Ideal HPLC Detector?</h3>With such a wide variety of HPLC detectors available, an obvious question arises: why is there no single detector that works for every application? The simple answer is that no detector can satisfy every analytical requirement at the same time. Nevertheless, most detector designs aim to achieve a similar set of desirable properties.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Figure_1_Detector_requirements_334605c913.webp" alt="KNAUER: Figure 1 - Detector requirements" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Figure_1_Detector_requirements_334605c913.webp 245w," sizes="100vw" width="1024" height="384"><h4>1. High Sensitivity – Detecting Very Small Amounts</h4>An ideal detector should be capable of measuring very low quantities of analyte, often in the nanogram or even picogram range. High sensitivity leads to lower limits of detection (LOD), can reduce sample preparation requirements, and is particularly valuable for applications such as impurity analysis or pharmacokinetic studies.Some detector technologies, including fluorescence detection (FLD), electrochemical detection (ECD), and mass spectrometry (MS), can achieve extremely high sensitivity. However, this level of performance is often limited to specific classes of compounds.<h4>2. Good Selectivity or Broad Applicability – Knowing What Is Being Detected</h4>Selectivity describes how effectively a detector responds to the target analyte while minimizing interference from the sample matrix or mobile phase.Depending on the analytical task, a detector may need to be highly selective, responding only to compounds with specific characteristics such as fluorescence or electrochemical activity. In other cases, broader applicability may be more important, allowing a wide range of compounds to be detected regardless of their molecular structure.<h4>3. Linear Response and Broad Dynamic Range – Reliable Quantification</h4>A good detector should provide a linear response across a sufficiently wide concentration range. This makes it possible to accurately quantify both major components and trace impurities within the same analytical method.A broad linear range simplifies calibration and improves confidence in quantitative results. Detector response should also remain highly reproducible from one injection to another.<h4>4. Compatibility with HPLC Conditions – Fitting the Chromatographic Method</h4>An ideal detector should be compatible with both gradient and isocratic elution, commonly used mobile phases and additives, typical flow rates, and standard HPLC operating temperatures.Poor compatibility may restrict method flexibility or force compromises in chromatographic performance. Some detectors provide excellent analytical performance but only under specific operating conditions, making them less suitable for certain methods.<h4>5. Stability and Low Noise – Distinguishing Signal from Background</h4>A stable baseline with minimal noise and drift improves the signal-to-noise ratio and overall data quality. This becomes especially important in long chromatographic runs, gradient methods, and trace-level analysis.Lower baseline noise makes weak analyte signals easier to distinguish and directly contributes to improved detection limits.<h4>6. Robustness, Ease of Use, and Maintenance – Supporting Routine Laboratory Work</h4>For day-to-day use, a detector should be reliable over long sequences, straightforward to operate, and require as little maintenance as possible.In routine laboratories, robustness and ease of operation can be just as important as analytical performance. Simple troubleshooting, low maintenance requirements, and limited consumable costs are major advantages, particularly in high-throughput environments.<h3>The Reality: No Detector Offers Everything</h3>Since no detector fulfils all these requirements perfectly, detector selection is inevitably a compromise between sensitivity, selectivity, universality, robustness, operating flexibility, and cost.For this reason, multi-detector configurations are increasingly common in modern HPLC systems. Combinations such as UV + CAD or UV + MS make it possible to benefit from complementary detection principles within a single analytical workflow.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Table_1_Comparison_of_commonly_used_HPLC_detector_classes_d74817b0f0.jpg" alt="KNAUER: Table 1 - Comparison of commonly used HPLC detector classes." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Table_1_Comparison_of_commonly_used_HPLC_detector_classes_d74817b0f0.jpg 113w," sizes="100vw" width="806" height="1115"><h3>Critical Performance Parameters of HPLC Detectors</h3><h4>Data Sampling Rate</h4><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Figure_2_Example_for_too_less_and_too_high_data_sampling_rate_741a53edc6.webp" alt="KNAUER: Figure 2 - Example for too less and too high data sampling rate." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Figure_2_Example_for_too_less_and_too_high_data_sampling_rate_741a53edc6.webp 245w," sizes="100vw" width="1024" height="410">The data acquisition rate, also known as the sampling rate, is one of the most important detector settings in HPLC. It describes how many data points are recorded per second and directly influences peak representation, peak shape, area precision, and baseline noise.The higher the sampling rate, the more data points are collected. The detector processes the measurements collected over a defined time interval and averages them, and these averaged points are then used to construct the chromatogram.At a data rate of 5 Hz, for example, five data points are acquired every second. If too few points are collected across a chromatographic peak, the resulting peak can appear jagged, poorly defined, and analytically unreliable, as illustrated on the left side of Figure 2.At the other extreme, a setting such as 100 Hz records 100 points each second, which is often unnecessarily high for conventional HPLC. The optimum sampling rate mainly depends on chromatographic peak width.For most standard HPLC applications, a data rate of approximately 10 to 20 Hz is sufficient to generate a smooth and symmetrical Gaussian peak.One consequence of using an excessively high acquisition rate is increased baseline noise. Statistically, the noise of the system depends on the number of data points used for averaging and decreases with the square root of the number of averaged measurements.Selecting an appropriate sampling rate is therefore a balance between collecting enough points to describe the chromatographic peak accurately and avoiding unnecessary noise.<h4>Noise and Drift</h4><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Figure_3_Baseline_noise_and_drift_685652e641.webp" alt="KNAUER: Figure 3 - Baseline noise and drift" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Figure_3_Baseline_noise_and_drift_685652e641.webp 245w," sizes="100vw" width="1024" height="400">What exactly is baseline noise? In simple terms, it represents the short-term fluctuations of the detector baseline over a defined period and is expressed in the units appropriate for the particular detector.Baseline noise is typically determined from the peak-to-peak variation of the detector signal while the mobile phase passes through the system.All HPLC detectors exhibit a certain level of noise. Potential sources include:<ul><li>electronic noise,</li><li>detector cell noise,</li><li>detector instability,</li><li>temperature fluctuations,</li><li>mobile-phase effects,</li><li>and other environmental or instrumental influences.</li></ul>Noise directly affects detector sensitivity because it determines the signal-to-noise ratio (S/N).A chromatographic peak is generally considered reliably detectable when its height is at least three times greater than the calculated baseline noise. This relationship is commonly used to define the limit of detection (LOD).The limit of quantification (LOQ) requires a stronger signal and is typically defined as approximately ten times the baseline noise.Another important parameter affecting sensitivity is baseline drift. Drift reflects the gradual change in detector response over time and therefore provides useful information about long-term detector stability.It is helpful to distinguish between short-term peak-to-peak noise and longer-term baseline drift over a defined time interval. Drift can be described as the average slope or change of the baseline within a specific period.Excessive drift may reduce sensitivity and complicate chromatographic peak integration.Short-term baseline instability can be influenced by contamination or deterioration of detector components, while long-term drift is often related to temperature stability, detector equilibration, or changes occurring within the analytical system.<h3>How to Select the Right HPLC Detector</h3>There is no universally “best” HPLC detector. The correct detector is simply the one that best matches the analytical task.When selecting a detector, several practical questions can help narrow the choice.<h4>1. Does the analyte absorb UV light or fluoresce?</h4>If the answer is yes, optical detectors such as UV/VIS or FLD are often the simplest and most effective options.UV/VIS detection is widely applicable to compounds containing suitable chromophores, while fluorescence detection provides particularly high sensitivity and selectivity for naturally fluorescent or derivatized analytes.<h4>2. Does the analyte lack a chromophore?</h4>If UV absorption is weak or absent, detectors such as RID, ELSD, or CAD may provide a more appropriate solution.These detector types are useful for compounds such as sugars, lipids, polymers, and other analytes that are difficult to monitor by conventional UV detection.<h4>3. Is structural information required?</h4>If structural information is important, mass spectrometry is usually the strongest choice.MS provides mass-to-charge information and, when tandem mass spectrometry is used, fragmentation data that can support compound identification and structural characterization.<h4>4. Is extremely high sensitivity necessary?</h4>For applications requiring very low detection limits, electrochemical detection or mass spectrometry may be the most suitable options.The exact choice depends on the chemical properties of the analyte and the required degree of selectivity.<h4>5. Are macromolecules such as proteins or polymers being investigated?</h4>For characterization of macromolecules, MALS and viscometry can provide valuable information about molecular weight, molecular size, branching, and aggregation.These techniques are especially powerful when combined with size-exclusion chromatography and can provide information that is not based solely on column elution behavior.For a more detailed discussion of detector selection, see the KNAUER blog article “The way you look at it – A comprehensive guide for selecting the appropriate HPLC detector.”Choosing the detection technology based on analyte properties, required sensitivity, chromatographic conditions, and the type of information needed is essential for obtaining reliable and meaningful HPLC results.<h3>Final Thoughts</h3>Understanding the desired characteristics and key performance parameters of HPLC detectors helps explain why different detector technologies are suited to different applications.No single detector can provide maximum sensitivity, selectivity, universality, robustness, flexibility, and low operating cost simultaneously. Recognizing these trade-offs provides a practical framework for selecting the most appropriate detector for a given chromatographic method.Parameters such as data sampling rate, baseline noise, drift, dynamic range, and compatibility with chromatographic conditions are just as important as the underlying detection principle itself.In the next articles of this series, we will take a closer look at the individual HPLC detection technologies, beginning with the most widely used optical detection method: UV/VIS detection.

Seeing is Believing – Detection Made Easy Part 2: Detector Characteristics

Our Library never stops expanding. What are the most recent contributions to LabRulezLCMS Library in the week of 17th August 2026? Check out new documents from the field of liquid phase, especially HPLC and LC/MS techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT LCMS AND RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">LabRulezGCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">LabRulezICPMS</a> libraries.</blockquote>This week we bring you posters by Agilent Technologies / ASMS, Thermo Fisher Scientific / ASMS and Shimadzu / ASMS and application note by Waters Corporation!<h3>1. Agilent Technologies / ASMS: Quantitation of N-Nitroso Duloxetine N-Nitrosamine Drug Substance Related Impurities (NDSRI) in API and Formulation by 6475 LC/TQ</h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/po_drug_impurities_lc_tq_tp_402_asms_2026_en_agilent_b933b9bddf.pdf">Full PDF for download</a></li></ul>Nitrosamine impurities are nitroso derivatives where the nitroso group is attached to an amine. The active pharmaceutical ingredient (API) derived from a class of nitrosamines are known as N-nitrosamine drugsubstance-related impurities (NDSRI). Nitrosamine impurities in APIs and drug products pose safety concerns, even in small quantities, and thus are a major concern for drug makers [1].&nbsp;Analytical methods must be sufficiently sensitive to quantify the nitrosamine of interest at levels as low as 10% of the specification limit and, where feasible, down to ≤5% of the specification limit, for the determination of the limit of detection. LC/MS/MS is an inherently selective and highly sensitive analytical technique that is well suited for the identification and quantification of trace-level impurities at extremely low concentrations. Consequently, LC/MS/MS has been widely adopted within the pharmaceutical industry, particularly for nitrosamine analysis [2-3].&nbsp;Therefore, manufacturers must develop and qualify a dedicated analytical method that is appropriate for the specific sample matrix and targeted NDSRIs. An LC/MS/MS method based on multiple reaction monitoring (MRM) was developed for the detection and quantification of the N-nitroso duloxetine NDSRI impurity over a concentration range of 0.5 to 40 ppb (absolute standard concentration), using an atmospheric pressure chemical ionization (APCI) source on an Agilent 6475A LC/TQ instrument.<h4>Experimental</h4><ul><li>MS: <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=6475">6475 Triple Quadrupole LC/MS System</a></li><li>Column: <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=Poroshell+HPH+C18">Poroshell HPH C18</a> (4.6*150mm, 2.7µm)</li></ul><h4>Conclusions</h4><ul><li>A highly sensitive and robust MRM LC/MS/MS method was developed for the quantitation of N-nitroso duloxetine in duloxetine hydrochloride API and finished formulation using the Agilent 6475A LC/TQ.&nbsp;</li><li>The optimized chromatographic conditions provided effective separation of the analyte from the API, placebo, and formulation matrices, ensuring reliable quantitation.&nbsp;</li><li>The calibration curve was linear over the concentration range of 0.5-40 ng/mL, with 1/x weighting. R and R2 values were observed for both to be greater than 0.99.&nbsp;</li><li>Recovery studies demonstrated efficient sample extraction, with recoveries ranging from 92-99% in API samples and 109-116% in pellet formulations at the LOQ, specification, and 200% specification levels.&nbsp;</li><li>The method also showed excellent reproducibility across all evaluated concentration levels, confirming its suitability for routine analysis.</li></ul><h3>2. Shimadzu / ASMS: Non-Targeted Analysis of Per- and Polyfluoroalkyl Substances in Environmental Extracts by Microflow LC-QToF Coupled with Multi-spray ESI</h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/TP_562_Non_Targeted_Analysis_of_Per_and_Polyfluoroalkyl_Substances_in_Environmental_Extracts_by_Microflow_LC_Q_To_F_Coupled_with_Multi_spray_ESI_c2a7e1d5bf.pdf">Full PDF for download</a></li></ul>Targeted screening methods are well established for monitoring Perand polyfluoroalkyl substances (PFAS) in environmental samples. However, PFAS comprise a large and evolving class of compounds, creating a need to screen existing, emerging, and transformation products across diverse matrices. Non-targeted Analysis (NTA) allows for the confirmation of suspected PFAS in the environment, but the sample characterization is often limited by analytical sensitivity. Microflow (0.5 – 40 µL/min) coupled with a multi-nozzle emitter enhances sensitivity by improving desolvation. When this is coupled to a high mass accuracy and resolution Quadrupole Time-ofFlight Mass Spectrometer (QToF), capable of data-dependent and independent MS/MS, PFAS characterization of unknown analytes is possible. In this study, various environmental extracts were processed and screened using NTA for PFAS compounds.<h4>Methods</h4>A <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=1&amp;search=Nexera+Mikros">Shimadzu Nexera Mikros LC </a>was used to introduce the sample to a Newomics DuoESI source with an M3 emitter on a <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=1&amp;search=9050">LCMS-9050 QToF MS</a> (Fig. 1). A direct injection on an octadecyl column without delay column was performed. Direct injection was chosen over trapand-elute configuration to minimize selectivity bias caused by the trap column.&nbsp;<h4>Conclusion</h4>With the increased sensitivity of microflow LC-QToF coupled with multi-spray ESI with DIA acquisition, Insight Explore aided in NTA PFAS analysis. When paired with Insight Discovery and Profiler, a streamlined batch data processing workflow with statistical analysis was shown to effectively handle complex environmental matrices and their analyses.<h3>3. Thermo Fisher Scientific / ASMS: Robust and sensitive quantitation of 18 steroids in human serum using Thermo Scientific TSQ Certis Triple Quadrupole mass spectrometer</h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/po_004707_lsms_18_steroids_tsq_certis_clinical_po004707_asms2026_na_en_244c52437b.pdf">Full PDF for download</a></li></ul>Accurate quantification of endogenous steroids in human serum is essential for biomonitoring physiological functions such as hormone regulation, reproduction, and immune response in clinical research laboratories. Liquid chromatography–tandem mass spectrometry (LC–MS/MS) is the gold standard for steroid analysis due to its superior sensitivity, selectivity, and multiplexing capability compared to immunoassays. However, steroid measurements remain challenging because of low endogenous concentrations and complex serum matrices. Here, we describe a robust and sensitive LC–MS/MS method for the simultaneous quantification of 18 steroids in human serum using the Thermo Scientific TSQ Certis triple quadrupole mass spectrometer (Figure 1). The method leverages advanced ion source design and fast acquisition to deliver enhanced sensitivity, stability and throughput suitable for high-volume laboratory workflows.<h4>Materials and methods</h4><h5>Liquid chromatograph – mass spectrometry&nbsp;</h5>Samples were analyzed on a <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/744">Thermo Scientific Vanquish Horizon UHPLC system</a> coupled to the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/2207">TSQ Certis MS</a> operated in selected reaction monitoring (SRM) mode. The mobile phase composition, analytical column details, LC gradient, and overlaid extracted ion chromatograms (EICs) are shown in Figure 3.&nbsp;<h5>Data analysis&nbsp;</h5>Data were acquired and processed using <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/77">Thermo Scientific TraceFinder software</a> (v 5.2).<h4>Conclusions&nbsp;</h4>A sensitive and robust LC–MS/MS method was developed for simultaneous quantification of 18 steroids in human serum using the Vanquish Horizon UHPLC and TSQ Certis MS with OptaMax Plus ion source. The method demonstrated excellent linearity, accuracy, and reproducibility across a wide dynamic range. Optimization of MS conditions, particularly vaporizer temperature, significantly improved sensitivity. Overall, the workflow delivers high sensitivity, selectivity, and long-term stability, providing a reliable solution for high-throughput steroid analysis in clinical and research settings.<h3>4. Waters Corporation: Alkaline-hydrolysis Method for PFAS in Textiles and Textiles Products by Xevo™ TQ-S micro with ACQUITY™ UPLC™ H-Class Plus System</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/720009443_en_0ab4914d72.pdf">Full PDF for download</a></li></ul><div><div><section><div><div><div><div><div><div><h5>Benefits&nbsp;</h5><ul><li>Alkaline hydrolysis method (EN 17681-1:2025) used for preparing textiles, coated textiles and textile products for PFAS analysis allowed the inclusion of side-chain fluorinated polymers&nbsp;</li><li>Extraction method provided significant advantages in handling complex textile matrices by creating clear extracts free from dispersions, settleable solids and particulates&nbsp;</li><li>Protected the high-value LC-MS/MS components from potential damage&nbsp;</li><li>The method improved analytical sensitivity, reproducibility and accuracy, enabled cost-effective and timeefficient PFAS analysis maintained high analytical quality even for challenging high-matrix samples</li></ul>Many PFAS are linked to health concerns because of their ability to interfere with the body’s hormone systems, acting as endocrine disruptors also, linked to other toxic effects. Since textiles come into direct and prolonged contact with the skin, there is an increased risk of human exposure—especially for babies and children.4 In addition, PFAS pose significant environmental concerns. These “forever chemicals” do not readily break down and can be released during manufacturing, washing and disposal, allowing them to enter water pathways and persist in the environment. As a result, testing for PFAS has become increasingly important in the textile industry to demonstrate supply chain transparency, build consumer trust and protect brand reputation.Synthetic fluorinated chemicals are categorized into two main groups - non-polymeric PFAS and polymeric PFAS, known for their use as water and grease repellent, heat resistant finishes in textiles, upholstery, leather, apparel, carpet and other industrial applications such as packaging, firefighting foams, non-stick cookware, etc. (Figure 1). PFAS are fluorinated substances contain at least one fully fluorinated methyl or methylene carbon atom (without any H/Cl/Br/I atom attached to it), i.e. with a few noted exceptions, any chemical with at least a perfluorinated methyl group or a perfluorinated methylene group.2 PFAS are classified as long chain and short chain based on their perfluorinated carbon chain length. Short chain fluorinated polymers encompasses a diverse range of chemistries, categorized according to their generic chemical and repeating units structures. Few examples are: derivatives of fluorotelomers, perfluoropolyethers with varying carbon chain lengths and acrylates, epoxylates, urethane, silicones of repeated units based structures.3 Polyfluoroalkyl substances such as fluorotelomer alcohols (FTOHs) contain C–H bonds, rendering them more susceptible to degradation. The ethoxylates in fluorotelomers-methacrylate break down to FTOH whereas polymeric fluorinated urethanes, acrylates break down to PFCAs (non-polymeric and polymeric side chain fluorinated polymers). In contrast, perfluoroalkyl substances such as PFOS and PFOA are extremely persistent due to their fully fluorinated carbon chains.&nbsp;In alkaline hydrolysis methods, methanolic aqueous sodium hydroxide is used to break down precursor PFAS such as FTOHs, branched side chain PFAS. This process releases terminal perfluorinated carboxylic acids (PFCAs), which can then be measured. However, the efficiency of hydrolysis varies among different PFAS compounds and the presence of interfering substances such as organic matter or other chemicals in the sample matrix can inhibit the cleavage and detection of these analytes.<h4>Experimental</h4><ul><li>LC system: <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/198">ACQUITY UPLC H-Class Plus System</a> and SMFTN fitted with PFAS kit</li><li>Column(s): <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1823">XBridge™ BEH™ C18 5 µm Column</a>, 4.6 x 100 mm&nbsp;</li><li>MS system: <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/209">Xevo TQ-S micro Mass Spectrometer</a></li></ul><h4>Conclusion&nbsp;</h4>By strictly following the critical steps of the alkaline hydrolysis method using methanolic aqueous sodium hydroxide (NaOH) both freely extractable PFAS and those previously bound within side-chain fluorinated polymers such as esters linked to fluorotelomer alcohols (n:2 FTOHs, where n = 4, 6, 8, 10, 12), can be effectively extracted. This approach also safeguards the LC-MS/MS instrumentation from blockages, damage, or contamination by preventing polymer accumulation and matrix interferences.&nbsp;The analytical method using the ACQUITY UPLC H-Class Plus System and Xevo TQ-S micro LC-MS/MS System was found to be sensitive, reproducible and accurate, enabling cost-effective and time-efficient PFAS analysis in chemically processed textiles, coated textiles and textile products whilst maintaining high analytical quality even for challenging high-matrix samples.</div></div></div></div></div></div></section></div></div>

News from LabRulezLCMS Library - Week 34, 2026

Article

Product

Application

Academy

Science and research

Poster

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Based in Berlin, KNAUER is a medium-sized, owner-managed company that has been serving the sciences since 1962. We develop and manufacture scientific instruments of superior quality for liquid chromatography, including: Analytical HPLC/UHPLC, Preparative HPLC, Fast protein liquid chromatography (FPLC), Multi-column chromatography/Simulated moving bed (SMB) chromatography. High pressure dosing, in-line detection systems, and osmometry are additional business areas.

KNAUER

Palacký University Olomouc (UP) is an internationally respected and scientifically and academically highly productive university in Central Europe. Founded 22 December 1573, it is the second-oldest university in the Czech Republic and the oldest one in Moravia. For 450 years it has contributed to the intellectual wealth of society and to its scientific, cultural, and social development.

Palacký University Olomouc

Phenomenex Kinetex Core-Shell C18 HPLC Columns

The well-rounded, all-purpose core-shell Kinetex C18 HPLC column produces high efficiencies compared to traditional, fully porous columns.

The Go-To Core-Shell Selectivity for Hydrophobic Compounds!The well-rounded, all-purpose core-shell Kinetex C18 HPLC column produces high efficiencies compared to traditional, fully porous columns. HPLC C18 columns come in various configurations to ensure outstanding performance and are recognized as the most retentive among alkyl-bonded phases. When used with UHPLC systems, the 2.6 µm size achieves similar performance to fully porous sub-2 µm particles but at significantly lower backpressure. Yielding remarkable chromatographic resolution, higher peak capacities, and greater sensitivity, the Kinetex C18 columns maximize the efficiency of every HPLC or UHPLC analysis.Advantages of Kinetex Core-Shell C18 HPLC Columns<ul><li>Compatible with all Analytical HPLC/UHPLC Systems</li><li>Four fully scalable particle sizes available</li><li>Excellent Reproducibility and Batch-to-Batch Confidence</li><li>USP: L1</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Kinetex_C18_e3ad60cfa9.webp" alt="Phenomenex: Kinetex-C18" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Kinetex_C18_e3ad60cfa9.webp 245w," sizes="100vw" width="500" height="150"><ul><li>Carbon Load: 12 (effective), null %, 12 (effective) %</li><li>Surface Area (m²/g): 200</li><li>Particle Size (μm): 1.3, 1.7, 2.6, 5</li><li>Recommended Use: All-purpose hydrophobic retention and methylene selectivity</li></ul><h4>Compatibility</h4>The Kinetex C18 column is fully compatible with all UHPLC instruments, ensuring seamless integration into any lab setup. This column is designed for easy installation and optimal performance. For installation, loosen the collet, place the tool between the gold compression screw and collet for quick release, adjust the tubing to the correct port depth, and connect the Kinetex column to the end-fitting. This universal compatibility allows you to leverage the powerful sub-2 µm column technology across different systems effortlessly.<h4>Balances Retention and Performance</h4>The Kinetex C18 column offers a well-balanced C18 phase that delivers the highest level of hydrophobic selectivity compared to other Kinetex phases.<h4>Upgrade from Traditional Fully Porous to Kinetex Core-Shell</h4>Enhance your analytical method instantly by upgrading to the Kinetex C18 column for superior performance. Take advantage of the fully scalable available particle sizes of Kinetex C18 to bring improved performance to any LC system!<figure class="image"><img style="aspect-ratio:911/871;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Fully_porous_vs_Core_shell_9faba152f9.jpg" alt="Phenomenex: Fully porous vs Core-shell C18 Columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Fully_porous_vs_Core_shell_9faba152f9.jpg 163w," sizes="100vw" width="911" height="871"></figure><h4>Performance with Kinetex C18 on HPLC and UHPLC Systems</h4>Quickly improve the productivity and performance of your existing methods and utilize the core-shell advantage to deliver the performance you need at backpressures the system can handle.<blockquote>Stationary phase Kinetex Core-Shell C18 is provided in these column types: analytical and preparative</blockquote><h3>Kinetex Core-Shell Technology Columns</h3>Kinetex Core-Shell Technology delivers dramatic improvements in efficiency over conventional fully porous media, which can be leveraged to increase resolution, significantly improve productivity, reduce solvent consumption, and decrease costs. Whether you are running high-performance liquid chromatography (HPLC) or ultra-high performance liquid chromatography (UHPLC) methods, the Kinetex core-shell family can deliver shockingly improved performance over the current column you are using. Phenomenex designs, manufactures, and sells its very own silica and organo-silica core-shell particles.Advantages of Kinetex HPLC Columns<ul><li>Performance gains on ANY liquid chromatography system</li><li>System-to-system and lab-to-lab method portability</li><li>Improve the productivity of older, established methods.</li></ul><h4>How Does Core-Shell Technology Work?</h4>Core-shell technology in chromatography is a revolutionary approach that enhances the efficiency of HPLC systems while minimizing costs. Core-shell particles are designed with a solid, non-porous silica core surrounded by a porous outer layer. This unique structure allows for faster analyte mass transfer between the mobile and stationary phases, as diffusion occurs only through the thin, porous shell rather than the entire particle. This minimizes band broadening, leading to higher separation efficiency and sharper peaks.The consistency in size and shape of core-shell particles further enhances separation efficiency by reducing variability in analyte movement. As a result, core-shell HPLC columns provide high efficiency and resolution at lower backpressures, making them an ideal choice for labs looking to improve their existing HPLC systems without the need for costly UHPLC equipment.Core-shell technology thus offers a cost-effective alternative to upgrading to UHPLC systems, enabling labs to maximize the efficiency of their current HPLC setups. The formation of these particles through advanced sol-gel processing techniques ensures uniformity and reliability, making them a valuable tool in modern chromatography. By using the Kinetex HPLC column, laboratories can achieve faster analysis times and higher productivity while maintaining excellent separation performance.<h3>Kinetex Core-Shell Performance on Any LC System</h3>The 5 versatile particle sizes allow you to select the best fit for your instrument.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_5_particle_sizes_bbed75c36f.jpg" alt="Phenomenex: Five versatile particle sizes of Kinetex Core-Shell Technology Columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_5_particle_sizes_bbed75c36f.jpg 245w," sizes="100vw" width="1341" height="333"><h3>Particle Chemistry</h3>Using sol-gel processing techniques that incorporate nano-structuring technology, a durable, homogeneous porous shell is grown on a solid silica core to create a Kinetex Core-Shell particle. This particle morphology results in less band broadening for all four sources of UHPLC band broadening compared to fully porous particles and thus delivers extremely high efficiencies.<ul><li>Optimized for Ultra-High Performance</li><li>Superior Core-Shell Quality</li><li>Core-Shell Scalability and Portability</li></ul>Kinetex particles are characterized by an exceptionally consistent size distribution, with particles being nearly monodispersed, meaning they are uniform in size. This precise uniformity plays a crucial role in minimizing variability within the column, leading to enhanced separation efficiency and sharper peaks.The nearly monodispersed nature of these particles ensures that the flow of the mobile phase remains consistent, reducing the likelihood of irregularities that can impact results. As a result, Kinetex columns deliver highly reliable and reproducible performance, making them ideal for achieving consistent analytical outcomes acrLC Kinetex Core-Shell Technolooss various applications.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_Kinetex_Polar_C18_vs_Fully_Porous_phase_a2729b64e5.jpg" alt="Phenomenex: Kinetex Polar C18 vs Fully Porous phase" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_Kinetex_Polar_C18_vs_Fully_Porous_phase_a2729b64e5.jpg 245w," sizes="100vw" width="1376" height="581"><h3>Core-shell vs Fully Porous</h3><h4>High-Efficiency‚ High-Density Particle</h4>The combination of a consistent, solid, high-density core along with proprietary column packing technologies in the Kinetex HPLC column ensures optimum bed structure and high column performance. This carefully designed core structure promotes uniform packing of the particles, which is essential for minimizing band-broadening effects that can arise from Eddy Diffusion.The manufacturing process of Kinetex columns is tightly controlled, focusing on factors such as particle size distribution, surface and bonding homogeneity, and packing quality. This meticulous engineering leads to uniform packing and minimized band-broadening, resulting in superior separation efficiency.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Core_shell_vs_Fully_Porous_60601b6fa3.jpg" alt="Phenomenex: Core-shell vs Fully Porous.jpg" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Core_shell_vs_Fully_Porous_60601b6fa3.jpg 245w," sizes="100vw" width="904" height="506"><h3>Expand Your Core-Shell Selectivity Toolbox</h3>Kinetex core-shell particle LC columns deliver exceptional performance enhancements across any LC system, offering unmatched efficiency and resolution. With a choice of 11 diverse stationary phases, these columns cater to a wide range of chromatographic applications, ensuring optimal separation for various analytes.Additionally, the availability of five versatile particle sizes allows for precise method tailoring, enabling both high-speed and high-resolution separations. Whether you're using HPLC or UHPLC systems, Kinetex columns provide the flexibility and performance needed to achieve superior analytical results.<h3>Top 5 Pros of Kinetex Core-Shell Technology</h3><ul><li>Productivity: Kinetex Core-Shell Technology significantly enhances method productivity with minimal effort. By simply replacing traditional, fully porous columns with Kinetex HPLC columns, users can achieve better resolution, sensitivity, and overall productivity without extensive method redevelopment. This easy switch allows for immediate improvements in chromatographic performance, making it a cost-effective upgrade to existing methods.</li><li>Portability The Kinetex Core-Shell columns are available in a range of particle sizes (1.3 µm to 5 µm), which ensures method portability across different HPLC and UHPLC systems. This scalability allows for consistent retention and selectivity across various particle sizes while accommodating different backpressure levels, making it easier to transfer methods between instruments.</li><li>Performance Kinetex Core-Shell Technology delivers superior chromatographic efficiency compared to fully porous particles. This efficiency boost enables chromatographers to maximize the performance of their HPLC/UHPLC systems, ensuring optimal results with higher resolution and sharper peaks, even under similar method conditions.</li><li>Phases With 11 unique phase selectivities available, Kinetex Core-Shell Technology offers unmatched versatility for method development. This wide selection of phase chemistries allows for tailored separations and simplified optimization, ensuring the best possible results for a wide range of applications.</li><li>Pressure Kinetex Core-Shell columns provide higher efficiency at lower system backpressures compared to fully porous columns. This allows users to achieve superior chromatographic performance on conventional LC instruments without the need for ultra-high-pressure systems, making it a practical choice for routine analyses.</li></ul>

Phenomenex Kinetex EVO C18 Core-Shell Columns

Kinetex EVO C18 uses patented organo-silica grafting with ethane cross-linking for stability and high pH resistance.

High pH Stable Core-ShellKinetex EVO C18 uses a patented organo-silica &nbsp;grafting process which incorporates uniform stabilizing ethane cross-linking to provide resistance to high pH attack while maintaining the mechanical strength of the core-shell particle. The Kinetex EVO C18 column provides both increased peak sensitivity and decreased overall analysis time.<ul><li>Compatible with All Analytical HPLC/UHPLC Systems</li><li>100 % Aqueous Mobile Phases Stable</li><li>pH Stable 1-12</li><li>USP: L1</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Kinetex_EVO_C18_Core_shell_HPLC_Column_f92e8a7a8e.webp" alt="Phenomenex: Kinetex EVO C18 Core-shell HPLC Column" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Kinetex_EVO_C18_Core_shell_HPLC_Column_f92e8a7a8e.webp 245w," sizes="100vw" width="500" height="150"><ul><li>Carbon Load: null %</li><li>Particle Size (μm): 1.7, 2.6, 5</li><li>Recommended Use: High pH stability from 1-12 to deliver robust methods and improved peak shape for bases</li></ul><h4>Selectivity for Polar Basic Compounds</h4>A novel Core-Shell that is pH stable 1-12 that delivers robust methods and improved peak shape for bases while still providing hydrophobic selectivity.<h4>Kinetex EVO C18 column - Unique Polar Basic Selectivity</h4>With excellent performance across a large pH range, Kinetex EVO C18 columns allow you to transform chromatograms and manipulate retention order, no matter the combination of compound functionalities. Now is your chance to break the mold and let your creative LC side flourish.<blockquote>Stationary phase Kinetex EVO C18 is provided in these column types: analytical and preparative</blockquote><h3>Kinetex Core-Shell Technology Columns</h3>Kinetex Core-Shell Technology delivers dramatic improvements in efficiency over conventional fully porous media, which can be leveraged to increase resolution, significantly improve productivity, reduce solvent consumption, and decrease costs. Whether you are running high-performance liquid chromatography (HPLC) or ultra-high performance liquid chromatography (UHPLC) methods, the Kinetex core-shell family can deliver shockingly improved performance over the current column you are using. Phenomenex designs, manufactures, and sells its very own silica and organo-silica core-shell particles.Advantages of Kinetex HPLC Columns<ul><li>Performance gains on ANY liquid chromatography system</li><li>System-to-system and lab-to-lab method portability</li><li>Improve the productivity of older, established methods.</li></ul><h4>How Does Core-Shell Technology Work?</h4>Core-shell technology in chromatography is a revolutionary approach that enhances the efficiency of HPLC systems while minimizing costs. Core-shell particles are designed with a solid, non-porous silica core surrounded by a porous outer layer. This unique structure allows for faster analyte mass transfer between the mobile and stationary phases, as diffusion occurs only through the thin, porous shell rather than the entire particle. This minimizes band broadening, leading to higher separation efficiency and sharper peaks.The consistency in size and shape of core-shell particles further enhances separation efficiency by reducing variability in analyte movement. As a result, core-shell HPLC columns provide high efficiency and resolution at lower backpressures, making them an ideal choice for labs looking to improve their existing HPLC systems without the need for costly UHPLC equipment.Core-shell technology thus offers a cost-effective alternative to upgrading to UHPLC systems, enabling labs to maximize the efficiency of their current HPLC setups. The formation of these particles through advanced sol-gel processing techniques ensures uniformity and reliability, making them a valuable tool in modern chromatography. By using the Kinetex HPLC column, laboratories can achieve faster analysis times and higher productivity while maintaining excellent separation performance.<h3>Kinetex Core-Shell Performance on Any LC System</h3>The 5 versatile particle sizes allow you to select the best fit for your instrument.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_5_particle_sizes_bbed75c36f.jpg" alt="Phenomenex: Five versatile particle sizes of Kinetex Core-Shell Technology Columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_5_particle_sizes_bbed75c36f.jpg 245w," sizes="100vw" width="1341" height="333"><h3>Particle Chemistry</h3>Using sol-gel processing techniques that incorporate nano-structuring technology, a durable, homogeneous porous shell is grown on a solid silica core to create a Kinetex Core-Shell particle. This particle morphology results in less band broadening for all four sources of UHPLC band broadening compared to fully porous particles and thus delivers extremely high efficiencies.<ul><li>Optimized for Ultra-High Performance</li><li>Superior Core-Shell Quality</li><li>Core-Shell Scalability and Portability</li></ul>Kinetex particles are characterized by an exceptionally consistent size distribution, with particles being nearly monodispersed, meaning they are uniform in size. This precise uniformity plays a crucial role in minimizing variability within the column, leading to enhanced separation efficiency and sharper peaks.The nearly monodispersed nature of these particles ensures that the flow of the mobile phase remains consistent, reducing the likelihood of irregularities that can impact results. As a result, Kinetex columns deliver highly reliable and reproducible performance, making them ideal for achieving consistent analytical outcomes acrLC Kinetex Core-Shell Technolooss various applications.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_Kinetex_Polar_C18_vs_Fully_Porous_phase_a2729b64e5.jpg" alt="Phenomenex: Kinetex Polar C18 vs Fully Porous phase" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_Kinetex_Polar_C18_vs_Fully_Porous_phase_a2729b64e5.jpg 245w," sizes="100vw" width="1376" height="581"><h3>Core-shell vs Fully Porous</h3><h4>High-Efficiency‚ High-Density Particle</h4>The combination of a consistent, solid, high-density core along with proprietary column packing technologies in the Kinetex HPLC column ensures optimum bed structure and high column performance. This carefully designed core structure promotes uniform packing of the particles, which is essential for minimizing band-broadening effects that can arise from Eddy Diffusion.The manufacturing process of Kinetex columns is tightly controlled, focusing on factors such as particle size distribution, surface and bonding homogeneity, and packing quality. This meticulous engineering leads to uniform packing and minimized band-broadening, resulting in superior separation efficiency.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Core_shell_vs_Fully_Porous_60601b6fa3.jpg" alt="Phenomenex: Core-shell vs Fully Porous.jpg" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Core_shell_vs_Fully_Porous_60601b6fa3.jpg 245w," sizes="100vw" width="904" height="506"><h3>Expand Your Core-Shell Selectivity Toolbox</h3>Kinetex core-shell particle LC columns deliver exceptional performance enhancements across any LC system, offering unmatched efficiency and resolution. With a choice of 11 diverse stationary phases, these columns cater to a wide range of chromatographic applications, ensuring optimal separation for various analytes.Additionally, the availability of five versatile particle sizes allows for precise method tailoring, enabling both high-speed and high-resolution separations. Whether you're using HPLC or UHPLC systems, Kinetex columns provide the flexibility and performance needed to achieve superior analytical results.<h3>Top 5 Pros of Kinetex Core-Shell Technology</h3><ul><li>Productivity: Kinetex Core-Shell Technology significantly enhances method productivity with minimal effort. By simply replacing traditional, fully porous columns with Kinetex HPLC columns, users can achieve better resolution, sensitivity, and overall productivity without extensive method redevelopment. This easy switch allows for immediate improvements in chromatographic performance, making it a cost-effective upgrade to existing methods.</li><li>Portability The Kinetex Core-Shell columns are available in a range of particle sizes (1.3 µm to 5 µm), which ensures method portability across different HPLC and UHPLC systems. This scalability allows for consistent retention and selectivity across various particle sizes while accommodating different backpressure levels, making it easier to transfer methods between instruments.</li><li>Performance Kinetex Core-Shell Technology delivers superior chromatographic efficiency compared to fully porous particles. This efficiency boost enables chromatographers to maximize the performance of their HPLC/UHPLC systems, ensuring optimal results with higher resolution and sharper peaks, even under similar method conditions.</li><li>Phases With 11 unique phase selectivities available, Kinetex Core-Shell Technology offers unmatched versatility for method development. This wide selection of phase chemistries allows for tailored separations and simplified optimization, ensuring the best possible results for a wide range of applications.</li><li>Pressure Kinetex Core-Shell columns provide higher efficiency at lower system backpressures compared to fully porous columns. This allows users to achieve superior chromatographic performance on conventional LC instruments without the need for ultra-high-pressure systems, making it a practical choice for routine analyses.</li></ul>

Phenomenex Kinetex PS C18 Core Shell Columns

The Kinetex PS C18 is a high efficiency, multi interaction selectivity C18 with a positive surface modification. 

Improved Selectivity and Performance For BasesThe Kinetex PS C18 is a high efficiency, multi interaction selectivity C18 with a positive surface modification. The column demonstrates enhanced selectivity and improved peak shape for basic compounds under typical reversed phase conditions.<ul><li>Compatible with All Analytical HPLC/UHPLC Systems</li><li>100 % Aqueous Mobile Phases Stable</li><li>C18 (USP:L1) with Improved Peak Shape for Bases</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Kinetex_PS_C18_Core_Shell_HPLC_Column_dd36bb172a.webp" alt="Phenomenex: Kinetex PS C18 Core-Shell Column" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Kinetex_PS_C18_Core_Shell_HPLC_Column_dd36bb172a.webp 245w," sizes="100vw" width="500" height="150"><ul><li>Carbon Load: null %</li><li>Particle Size (μm): 2.6</li><li>Recommended Use: A multi-modal, 100 % aqueous C18 column with a positive surface modification that demonstrates unique selectivity and improved peak shape for basic compounds</li></ul><h4>Selectivity for Polar Basic Compounds</h4>A multi-interaction, 100 % aqueous C18 column that provides great peak shape for basic compounds under low pH conditions and without sacrificing hydrophobic selectivity.<h4>Unique Polar Basic Selectivity</h4>The Kinetex PS C18 combines a 100 % aqueous stability C18 stationary phase, with a unique positive surface charge, and the core-shell advantage to deliver both excellent performance and reversed phase selectivity. Upgrade your traditional fully porous particle to a Kinetex PS C18 Core-Shell particle to take full polar advantage of your systems analytical capabilities.&nbsp;<h4>Take Advantage of the Right Phase for the Application</h4>While traditional alkyl C18 phases are prone to peak tailing for basic compounds due to of secondary interactions occurring at the silica surface, the surface of the Kinetex PS C18 was designed with positive charges that serve to repel basic species and deliver consistently sharper peak shape for basic compounds.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Comparison_of_Kinetex_PS_C18_and_Kinetex_C18_48598f5e57.jpg" alt="Phenomenex: Comparison of Kinetex PS C18 and Kinetex C18" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Comparison_of_Kinetex_PS_C18_and_Kinetex_C18_48598f5e57.jpg 169w," sizes="100vw" width="908" height="843"><h3>Kinetex Core-Shell Technology Columns</h3>Kinetex Core-Shell Technology delivers dramatic improvements in efficiency over conventional fully porous media, which can be leveraged to increase resolution, significantly improve productivity, reduce solvent consumption, and decrease costs. Whether you are running high-performance liquid chromatography (HPLC) or ultra-high performance liquid chromatography (UHPLC) methods, the Kinetex core-shell family can deliver shockingly improved performance over the current column you are using. Phenomenex designs, manufactures, and sells its very own silica and organo-silica core-shell particles.Advantages of Kinetex HPLC Columns<ul><li>Performance gains on ANY liquid chromatography system</li><li>System-to-system and lab-to-lab method portability</li><li>Improve the productivity of older, established methods.</li></ul><h4>How Does Core-Shell Technology Work?</h4>Core-shell technology in chromatography is a revolutionary approach that enhances the efficiency of HPLC systems while minimizing costs. Core-shell particles are designed with a solid, non-porous silica core surrounded by a porous outer layer. This unique structure allows for faster analyte mass transfer between the mobile and stationary phases, as diffusion occurs only through the thin, porous shell rather than the entire particle. This minimizes band broadening, leading to higher separation efficiency and sharper peaks.The consistency in size and shape of core-shell particles further enhances separation efficiency by reducing variability in analyte movement. As a result, core-shell HPLC columns provide high efficiency and resolution at lower backpressures, making them an ideal choice for labs looking to improve their existing HPLC systems without the need for costly UHPLC equipment.Core-shell technology thus offers a cost-effective alternative to upgrading to UHPLC systems, enabling labs to maximize the efficiency of their current HPLC setups. The formation of these particles through advanced sol-gel processing techniques ensures uniformity and reliability, making them a valuable tool in modern chromatography. By using the Kinetex HPLC column, laboratories can achieve faster analysis times and higher productivity while maintaining excellent separation performance.<h3>Kinetex Core-Shell Performance on Any LC System</h3>The 5 versatile particle sizes allow you to select the best fit for your instrument.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_5_particle_sizes_bbed75c36f.jpg" alt="Phenomenex: Five versatile particle sizes of Kinetex Core-Shell Technology Columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_5_particle_sizes_bbed75c36f.jpg 245w," sizes="100vw" width="1341" height="333"><h3>Particle Chemistry</h3>Using sol-gel processing techniques that incorporate nano-structuring technology, a durable, homogeneous porous shell is grown on a solid silica core to create a Kinetex Core-Shell particle. This particle morphology results in less band broadening for all four sources of UHPLC band broadening compared to fully porous particles and thus delivers extremely high efficiencies.<ul><li>Optimized for Ultra-High Performance</li><li>Superior Core-Shell Quality</li><li>Core-Shell Scalability and Portability</li></ul>Kinetex particles are characterized by an exceptionally consistent size distribution, with particles being nearly monodispersed, meaning they are uniform in size. This precise uniformity plays a crucial role in minimizing variability within the column, leading to enhanced separation efficiency and sharper peaks.The nearly monodispersed nature of these particles ensures that the flow of the mobile phase remains consistent, reducing the likelihood of irregularities that can impact results. As a result, Kinetex columns deliver highly reliable and reproducible performance, making them ideal for achieving consistent analytical outcomes acrLC Kinetex Core-Shell Technolooss various applications.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_Kinetex_Polar_C18_vs_Fully_Porous_phase_a2729b64e5.jpg" alt="Phenomenex: Kinetex Polar C18 vs Fully Porous phase" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_Kinetex_Polar_C18_vs_Fully_Porous_phase_a2729b64e5.jpg 245w," sizes="100vw" width="1376" height="581"><h3>Core-shell vs Fully Porous</h3><h4>High-Efficiency‚ High-Density Particle</h4>The combination of a consistent, solid, high-density core along with proprietary column packing technologies in the Kinetex HPLC column ensures optimum bed structure and high column performance. This carefully designed core structure promotes uniform packing of the particles, which is essential for minimizing band-broadening effects that can arise from Eddy Diffusion.The manufacturing process of Kinetex columns is tightly controlled, focusing on factors such as particle size distribution, surface and bonding homogeneity, and packing quality. This meticulous engineering leads to uniform packing and minimized band-broadening, resulting in superior separation efficiency.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Core_shell_vs_Fully_Porous_60601b6fa3.jpg" alt="Phenomenex: Core-shell vs Fully Porous.jpg" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Core_shell_vs_Fully_Porous_60601b6fa3.jpg 245w," sizes="100vw" width="904" height="506"><h3>Expand Your Core-Shell Selectivity Toolbox</h3>Kinetex core-shell particle LC columns deliver exceptional performance enhancements across any LC system, offering unmatched efficiency and resolution. With a choice of 11 diverse stationary phases, these columns cater to a wide range of chromatographic applications, ensuring optimal separation for various analytes.Additionally, the availability of five versatile particle sizes allows for precise method tailoring, enabling both high-speed and high-resolution separations. Whether you're using HPLC or UHPLC systems, Kinetex columns provide the flexibility and performance needed to achieve superior analytical results.<h3>Top 5 Pros of Kinetex Core-Shell Technology</h3><ul><li>Productivity: Kinetex Core-Shell Technology significantly enhances method productivity with minimal effort. By simply replacing traditional, fully porous columns with Kinetex HPLC columns, users can achieve better resolution, sensitivity, and overall productivity without extensive method redevelopment. This easy switch allows for immediate improvements in chromatographic performance, making it a cost-effective upgrade to existing methods.</li><li>Portability The Kinetex Core-Shell columns are available in a range of particle sizes (1.3 µm to 5 µm), which ensures method portability across different HPLC and UHPLC systems. This scalability allows for consistent retention and selectivity across various particle sizes while accommodating different backpressure levels, making it easier to transfer methods between instruments.</li><li>Performance Kinetex Core-Shell Technology delivers superior chromatographic efficiency compared to fully porous particles. This efficiency boost enables chromatographers to maximize the performance of their HPLC/UHPLC systems, ensuring optimal results with higher resolution and sharper peaks, even under similar method conditions.</li><li>Phases With 11 unique phase selectivities available, Kinetex Core-Shell Technology offers unmatched versatility for method development. This wide selection of phase chemistries allows for tailored separations and simplified optimization, ensuring the best possible results for a wide range of applications.</li><li>Pressure Kinetex Core-Shell columns provide higher efficiency at lower system backpressures compared to fully porous columns. This allows users to achieve superior chromatographic performance on conventional LC instruments without the need for ultra-high-pressure systems, making it a practical choice for routine analyses.</li></ul>

Phenomenex Kinetex Core-Shell Biphenyl Columns

Kinetex Biphenyl is a high-efficiency core-shell product capable of adding extra separation power to your analysis of non-polar and polar compounds. 

Enhanced Polar and Aromatic SelectivityKinetex Biphenyl is a high-efficiency core-shell product capable of adding extra separation power to your analysis of non-polar and polar compounds. Take advantage of multiple selectivity interaction mechanisms such as hydrophobic, pi-pi, and dipole-dipole to improve tough separations.<ul><li>Compatible with All Analytical HPLC/UHPLC Systems</li><li>Orthogonal Selectivity to C18 Phase</li><li>100 % Aqueous Mobile Phases Stable</li><li>USP: L11</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Kinetex_Core_Shell_Shell_Biphenyl_HPLC_Column_df8c120cb3.webp" alt="Phenomenex: Kinetex Core-Shell Biphenyl HPLC Column" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Kinetex_Core_Shell_Shell_Biphenyl_HPLC_Column_df8c120cb3.webp 245w," sizes="100vw" width="500" height="150"><ul><li>Carbon Load: null %</li><li>Particle Size (μm): 1.7, 2.6, 5</li><li>Recommended Use: 100 % aqueous stable reversed phase chemistry with hydrophobic, aromatic, and enhanced polar selectivity</li></ul><h4>Novel Selectivity For Tough Separations</h4>Think high performance‚ enhanced retention‚ and the ability to go where a traditional C18 can’t. The Kinetex Biphenyl offers the high performance benefits of a core-shell particle with a unique stationary phase capable of becoming the go-to selectivity for reversed phase method development. Use Kinetex Biphenyl columns to get enhanced retention‚ higher sensitivity‚ and overall better results; especially for aromatic compounds.<h4>Aromatic Selectivity</h4>Compounds with aromatic ring structures offer a specific type of selectivity associated with pi-pi bond interaction. The compound’s aromaticity provides pi electrons that have the potential to interact with pi bonds, which can be found on phenyl based stationary phases. This provides a unique, orthogonal selectivity compared to a traditional C18 phase.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Kinetex_Core_Shell_Biphenyl_Column_Aromatic_Selectivity_38c60ea30c.jpg" alt="Phenomenex: Kinetex Core-Shell Biphenyl Column - Aromatic Selectivity" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Kinetex_Core_Shell_Biphenyl_Column_Aromatic_Selectivity_38c60ea30c.jpg 245w," sizes="100vw" width="910" height="552"><h4>Increased Separation of Aromatic Compounds Using a Biphenyl Phase</h4>The elution order of analytes can change depending upon the predominate selectivity characteristics of a HPLC or UHPLC column and the utilized mobile phase. Therefore, by altering the stationary phase or mobile phase conditions, we can observe a unique elution order and extend retention of more polar analytes.<blockquote>Stationary phase Kinetex Core-Shell Biphenyl is provided in these column types: analytical and preparative</blockquote><h3>Kinetex Core-Shell Technology Columns</h3>Kinetex Core-Shell Technology delivers dramatic improvements in efficiency over conventional fully porous media, which can be leveraged to increase resolution, significantly improve productivity, reduce solvent consumption, and decrease costs. Whether you are running high-performance liquid chromatography (HPLC) or ultra-high performance liquid chromatography (UHPLC) methods, the Kinetex core-shell family can deliver shockingly improved performance over the current column you are using. Phenomenex designs, manufactures, and sells its very own silica and organo-silica core-shell particles.Advantages of Kinetex HPLC Columns<ul><li>Performance gains on ANY liquid chromatography system</li><li>System-to-system and lab-to-lab method portability</li><li>Improve the productivity of older, established methods.</li></ul><h4>How Does Core-Shell Technology Work?</h4>Core-shell technology in chromatography is a revolutionary approach that enhances the efficiency of HPLC systems while minimizing costs. Core-shell particles are designed with a solid, non-porous silica core surrounded by a porous outer layer. This unique structure allows for faster analyte mass transfer between the mobile and stationary phases, as diffusion occurs only through the thin, porous shell rather than the entire particle. This minimizes band broadening, leading to higher separation efficiency and sharper peaks.The consistency in size and shape of core-shell particles further enhances separation efficiency by reducing variability in analyte movement. As a result, core-shell HPLC columns provide high efficiency and resolution at lower backpressures, making them an ideal choice for labs looking to improve their existing HPLC systems without the need for costly UHPLC equipment.Core-shell technology thus offers a cost-effective alternative to upgrading to UHPLC systems, enabling labs to maximize the efficiency of their current HPLC setups. The formation of these particles through advanced sol-gel processing techniques ensures uniformity and reliability, making them a valuable tool in modern chromatography. By using the Kinetex HPLC column, laboratories can achieve faster analysis times and higher productivity while maintaining excellent separation performance.<h3>Kinetex Core-Shell Performance on Any LC System</h3>The 5 versatile particle sizes allow you to select the best fit for your instrument.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_5_particle_sizes_bbed75c36f.jpg" alt="Phenomenex: Five versatile particle sizes of Kinetex Core-Shell Technology Columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_5_particle_sizes_bbed75c36f.jpg 245w," sizes="100vw" width="1341" height="333"><h3>Particle Chemistry</h3>Using sol-gel processing techniques that incorporate nano-structuring technology, a durable, homogeneous porous shell is grown on a solid silica core to create a Kinetex Core-Shell particle. This particle morphology results in less band broadening for all four sources of UHPLC band broadening compared to fully porous particles and thus delivers extremely high efficiencies.<ul><li>Optimized for Ultra-High Performance</li><li>Superior Core-Shell Quality</li><li>Core-Shell Scalability and Portability</li></ul>Kinetex particles are characterized by an exceptionally consistent size distribution, with particles being nearly monodispersed, meaning they are uniform in size. This precise uniformity plays a crucial role in minimizing variability within the column, leading to enhanced separation efficiency and sharper peaks.The nearly monodispersed nature of these particles ensures that the flow of the mobile phase remains consistent, reducing the likelihood of irregularities that can impact results. As a result, Kinetex columns deliver highly reliable and reproducible performance, making them ideal for achieving consistent analytical outcomes acrLC Kinetex Core-Shell Technolooss various applications.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_Kinetex_Polar_C18_vs_Fully_Porous_phase_a2729b64e5.jpg" alt="Phenomenex: Kinetex Polar C18 vs Fully Porous phase" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_Kinetex_Polar_C18_vs_Fully_Porous_phase_a2729b64e5.jpg 245w," sizes="100vw" width="1376" height="581"><h3>Core-shell vs Fully Porous</h3><h4>High-Efficiency‚ High-Density Particle</h4>The combination of a consistent, solid, high-density core along with proprietary column packing technologies in the Kinetex HPLC column ensures optimum bed structure and high column performance. This carefully designed core structure promotes uniform packing of the particles, which is essential for minimizing band-broadening effects that can arise from Eddy Diffusion.The manufacturing process of Kinetex columns is tightly controlled, focusing on factors such as particle size distribution, surface and bonding homogeneity, and packing quality. This meticulous engineering leads to uniform packing and minimized band-broadening, resulting in superior separation efficiency.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Core_shell_vs_Fully_Porous_60601b6fa3.jpg" alt="Phenomenex: Core-shell vs Fully Porous.jpg" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Core_shell_vs_Fully_Porous_60601b6fa3.jpg 245w," sizes="100vw" width="904" height="506"><h3>Expand Your Core-Shell Selectivity Toolbox</h3>Kinetex core-shell particle LC columns deliver exceptional performance enhancements across any LC system, offering unmatched efficiency and resolution. With a choice of 11 diverse stationary phases, these columns cater to a wide range of chromatographic applications, ensuring optimal separation for various analytes.Additionally, the availability of five versatile particle sizes allows for precise method tailoring, enabling both high-speed and high-resolution separations. Whether you're using HPLC or UHPLC systems, Kinetex columns provide the flexibility and performance needed to achieve superior analytical results.<h3>Top 5 Pros of Kinetex Core-Shell Technology</h3><ul><li>Productivity: Kinetex Core-Shell Technology significantly enhances method productivity with minimal effort. By simply replacing traditional, fully porous columns with Kinetex HPLC columns, users can achieve better resolution, sensitivity, and overall productivity without extensive method redevelopment. This easy switch allows for immediate improvements in chromatographic performance, making it a cost-effective upgrade to existing methods.</li><li>Portability The Kinetex Core-Shell columns are available in a range of particle sizes (1.3 µm to 5 µm), which ensures method portability across different HPLC and UHPLC systems. This scalability allows for consistent retention and selectivity across various particle sizes while accommodating different backpressure levels, making it easier to transfer methods between instruments.</li><li>Performance Kinetex Core-Shell Technology delivers superior chromatographic efficiency compared to fully porous particles. This efficiency boost enables chromatographers to maximize the performance of their HPLC/UHPLC systems, ensuring optimal results with higher resolution and sharper peaks, even under similar method conditions.</li><li>Phases With 11 unique phase selectivities available, Kinetex Core-Shell Technology offers unmatched versatility for method development. This wide selection of phase chemistries allows for tailored separations and simplified optimization, ensuring the best possible results for a wide range of applications.</li><li>Pressure Kinetex Core-Shell columns provide higher efficiency at lower system backpressures compared to fully porous columns. This allows users to achieve superior chromatographic performance on conventional LC instruments without the need for ultra-high-pressure systems, making it a practical choice for routine analyses.</li></ul>

Phenomenex Kinetex F5 Core-Shell Columns

Combine core-shell performance, multiple retention mechanisms and the Kinetex F5 column’s ability to be run in a variety of separation modes.

Maximize Retention Interactions and PerformanceCombine core-shell performance, multiple retention mechanisms and the Kinetex F5 column’s ability to be run in a variety of separation modes (reversed phase, SFC, 2D LC, and 100% aqueous) and you now have an impeccable method development tool at your disposal.<ul><li>Compatible with All Analytical HPLC/UHPLC Systems</li><li>100 % Aqueous Mobile Phases Stable</li><li>5 Mechanisms of Retention and Selectivity</li><li>USP: L43</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Kinetex_F5_Core_Shell_HPLC_Column_188a3f510f.webp" alt="Phenomenex: Kinetex F5 Core-Shell HPLC Column" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Kinetex_F5_Core_Shell_HPLC_Column_188a3f510f.webp 245w," sizes="100vw" width="500" height="150"><ul><li>Carbon Load: null %</li><li>Particle Size (μm): 1.7, 2.6, 5</li><li>Recommended Use: Highly reproducible pentafluorophenylpropyl phase, exceptional for halogenated, conjugated, isomeric, or highly polar compounds.</li></ul><h4>F5 - A Novel Selectivity For Tough Separations</h4>This pentafluorophenyl propyl column provides a very high degree of steric selectivity to separate structural isomers. The electronegative fluorine groups offer high selectivity for cationic compounds.<h4>Dependable F5 Selectivity</h4>While older pentafluorophenyl phases (PFP, PFPP, F5, etc.) are based on existing bonding techniques and technologies that promote irreproducibility. The Kinetex F5 was meticulously designed by Phenomenex R&amp;D and its customers, to provide consistently accurate and high performance results.<h4>Take Advantage of Multiple Interactive Mechanisms</h4>The multiple interactive mechanisms of the Kinetex F5 (pentafluorophenyl ) column successfully separate methoxybenzene isomers, while the Kinetex C18 column, which has minimal bonding interactions, cannot separate the methoxybenzene isomers. This demonstrates that columns that rely primarily on hydrophobic interactions may not be the first choice for the separation of isomeric compounds and a column with multiple interactive mechanisms may be required.<blockquote>Stationary phase Kinetex F5 is provided in these column types: analytical and preparative</blockquote><h3>Kinetex Core-Shell Technology Columns</h3>Kinetex Core-Shell Technology delivers dramatic improvements in efficiency over conventional fully porous media, which can be leveraged to increase resolution, significantly improve productivity, reduce solvent consumption, and decrease costs. Whether you are running high-performance liquid chromatography (HPLC) or ultra-high performance liquid chromatography (UHPLC) methods, the Kinetex core-shell family can deliver shockingly improved performance over the current column you are using. Phenomenex designs, manufactures, and sells its very own silica and organo-silica core-shell particles.Advantages of Kinetex HPLC Columns<ul><li>Performance gains on ANY liquid chromatography system</li><li>System-to-system and lab-to-lab method portability</li><li>Improve the productivity of older, established methods.</li></ul><h4>How Does Core-Shell Technology Work?</h4>Core-shell technology in chromatography is a revolutionary approach that enhances the efficiency of HPLC systems while minimizing costs. Core-shell particles are designed with a solid, non-porous silica core surrounded by a porous outer layer. This unique structure allows for faster analyte mass transfer between the mobile and stationary phases, as diffusion occurs only through the thin, porous shell rather than the entire particle. This minimizes band broadening, leading to higher separation efficiency and sharper peaks.The consistency in size and shape of core-shell particles further enhances separation efficiency by reducing variability in analyte movement. As a result, core-shell HPLC columns provide high efficiency and resolution at lower backpressures, making them an ideal choice for labs looking to improve their existing HPLC systems without the need for costly UHPLC equipment.Core-shell technology thus offers a cost-effective alternative to upgrading to UHPLC systems, enabling labs to maximize the efficiency of their current HPLC setups. The formation of these particles through advanced sol-gel processing techniques ensures uniformity and reliability, making them a valuable tool in modern chromatography. By using the Kinetex HPLC column, laboratories can achieve faster analysis times and higher productivity while maintaining excellent separation performance.<h3>Kinetex Core-Shell Performance on Any LC System</h3>The 5 versatile particle sizes allow you to select the best fit for your instrument.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_5_particle_sizes_bbed75c36f.jpg" alt="Phenomenex: Five versatile particle sizes of Kinetex Core-Shell Technology Columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_5_particle_sizes_bbed75c36f.jpg 245w," sizes="100vw" width="1341" height="333"><h3>Particle Chemistry</h3>Using sol-gel processing techniques that incorporate nano-structuring technology, a durable, homogeneous porous shell is grown on a solid silica core to create a Kinetex Core-Shell particle. This particle morphology results in less band broadening for all four sources of UHPLC band broadening compared to fully porous particles and thus delivers extremely high efficiencies.<ul><li>Optimized for Ultra-High Performance</li><li>Superior Core-Shell Quality</li><li>Core-Shell Scalability and Portability</li></ul>Kinetex particles are characterized by an exceptionally consistent size distribution, with particles being nearly monodispersed, meaning they are uniform in size. This precise uniformity plays a crucial role in minimizing variability within the column, leading to enhanced separation efficiency and sharper peaks.The nearly monodispersed nature of these particles ensures that the flow of the mobile phase remains consistent, reducing the likelihood of irregularities that can impact results. As a result, Kinetex columns deliver highly reliable and reproducible performance, making them ideal for achieving consistent analytical outcomes acrLC Kinetex Core-Shell Technolooss various applications.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_Kinetex_Polar_C18_vs_Fully_Porous_phase_a2729b64e5.jpg" alt="Phenomenex: Kinetex Polar C18 vs Fully Porous phase" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_Kinetex_Polar_C18_vs_Fully_Porous_phase_a2729b64e5.jpg 245w," sizes="100vw" width="1376" height="581"><h3>Core-shell vs Fully Porous</h3><h4>High-Efficiency‚ High-Density Particle</h4>The combination of a consistent, solid, high-density core along with proprietary column packing technologies in the Kinetex HPLC column ensures optimum bed structure and high column performance. This carefully designed core structure promotes uniform packing of the particles, which is essential for minimizing band-broadening effects that can arise from Eddy Diffusion.The manufacturing process of Kinetex columns is tightly controlled, focusing on factors such as particle size distribution, surface and bonding homogeneity, and packing quality. This meticulous engineering leads to uniform packing and minimized band-broadening, resulting in superior separation efficiency.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Core_shell_vs_Fully_Porous_60601b6fa3.jpg" alt="Phenomenex: Core-shell vs Fully Porous.jpg" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Core_shell_vs_Fully_Porous_60601b6fa3.jpg 245w," sizes="100vw" width="904" height="506"><h3>Expand Your Core-Shell Selectivity Toolbox</h3>Kinetex core-shell particle LC columns deliver exceptional performance enhancements across any LC system, offering unmatched efficiency and resolution. With a choice of 11 diverse stationary phases, these columns cater to a wide range of chromatographic applications, ensuring optimal separation for various analytes.Additionally, the availability of five versatile particle sizes allows for precise method tailoring, enabling both high-speed and high-resolution separations. Whether you're using HPLC or UHPLC systems, Kinetex columns provide the flexibility and performance needed to achieve superior analytical results.<h3>Top 5 Pros of Kinetex Core-Shell Technology</h3><ul><li>Productivity: Kinetex Core-Shell Technology significantly enhances method productivity with minimal effort. By simply replacing traditional, fully porous columns with Kinetex HPLC columns, users can achieve better resolution, sensitivity, and overall productivity without extensive method redevelopment. This easy switch allows for immediate improvements in chromatographic performance, making it a cost-effective upgrade to existing methods.</li><li>Portability The Kinetex Core-Shell columns are available in a range of particle sizes (1.3 µm to 5 µm), which ensures method portability across different HPLC and UHPLC systems. This scalability allows for consistent retention and selectivity across various particle sizes while accommodating different backpressure levels, making it easier to transfer methods between instruments.</li><li>Performance Kinetex Core-Shell Technology delivers superior chromatographic efficiency compared to fully porous particles. This efficiency boost enables chromatographers to maximize the performance of their HPLC/UHPLC systems, ensuring optimal results with higher resolution and sharper peaks, even under similar method conditions.</li><li>Phases With 11 unique phase selectivities available, Kinetex Core-Shell Technology offers unmatched versatility for method development. This wide selection of phase chemistries allows for tailored separations and simplified optimization, ensuring the best possible results for a wide range of applications.</li><li>Pressure Kinetex Core-Shell columns provide higher efficiency at lower system backpressures compared to fully porous columns. This allows users to achieve superior chromatographic performance on conventional LC instruments without the need for ultra-high-pressure systems, making it a practical choice for routine analyses.</li></ul>

Phenomenex Kinetex Phenyl-Hexyl Core-Shell Columns

The Kinetex Phenyl-Hexyl column combines the performance gains of the Kinetex Core-Shell technology with balanced hydrophobic and aromatic selectivity.

Performance and Balanced SelectivityThe Kinetex Phenyl-Hexyl column combines the performance gains of the Kinetex Core-Shell technology with balanced hydrophobic and aromatic selectivity.<ul><li>Compatible with All Analytical HPLC/UHPLC Systems*</li><li>Balanced Hydrophobic and Aromatic Selectivity</li><li>Available in Three Particle Sizes</li><li>USP:L11</li></ul><figure class="image"><img style="aspect-ratio:193/210;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Kinetex_Phenyl_Hexyl_Core_Shell_HPLC_Column_a2f28d943f.jpg" alt="Phenomenex: Kinetex phenyl-hexyl Core-Shell HPLC column" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Kinetex_Phenyl_Hexyl_Core_Shell_HPLC_Column_a2f28d943f.jpg 143w," sizes="100vw" width="193" height="210"></figure><ul><li>Carbon Load: 10.0, null %, 10.0 %</li><li>Particle Size (μm): 1.7, 2.6, 5</li><li>Recommended Use: Allows for greater retention and separation of aromatic hydrocarbons</li></ul><h4>Diverse Selectivity For Closely Related Compounds</h4>Aromatic and moderate hydrophobic selectivity result in the great retention and separation of aromatic hydrocarbons<h4>Phenyl Selectivity with Balanced Hydrophobic Retention</h4>Retain and separate a wide class of compounds with the unique and balanced selectivity of the Kinetex Phenyl-hexyl. The phenyl-hexyl column consistently provides reproducible and transient interactions that increase polar selectivity and deliver good chromatographic peak shape.<blockquote>Stationary phase Kinetex Phenyl-hexyl is provided in these column types: analytical and preparative</blockquote><h3>Kinetex Core-Shell Technology Columns</h3>Kinetex Core-Shell Technology delivers dramatic improvements in efficiency over conventional fully porous media, which can be leveraged to increase resolution, significantly improve productivity, reduce solvent consumption, and decrease costs. Whether you are running high-performance liquid chromatography (HPLC) or ultra-high performance liquid chromatography (UHPLC) methods, the Kinetex core-shell family can deliver shockingly improved performance over the current column you are using. Phenomenex designs, manufactures, and sells its very own silica and organo-silica core-shell particles.Advantages of Kinetex HPLC Columns<ul><li>Performance gains on ANY liquid chromatography system</li><li>System-to-system and lab-to-lab method portability</li><li>Improve the productivity of older, established methods.</li></ul><h4>How Does Core-Shell Technology Work?</h4>Core-shell technology in chromatography is a revolutionary approach that enhances the efficiency of HPLC systems while minimizing costs. Core-shell particles are designed with a solid, non-porous silica core surrounded by a porous outer layer. This unique structure allows for faster analyte mass transfer between the mobile and stationary phases, as diffusion occurs only through the thin, porous shell rather than the entire particle. This minimizes band broadening, leading to higher separation efficiency and sharper peaks.The consistency in size and shape of core-shell particles further enhances separation efficiency by reducing variability in analyte movement. As a result, core-shell HPLC columns provide high efficiency and resolution at lower backpressures, making them an ideal choice for labs looking to improve their existing HPLC systems without the need for costly UHPLC equipment.Core-shell technology thus offers a cost-effective alternative to upgrading to UHPLC systems, enabling labs to maximize the efficiency of their current HPLC setups. The formation of these particles through advanced sol-gel processing techniques ensures uniformity and reliability, making them a valuable tool in modern chromatography. By using the Kinetex HPLC column, laboratories can achieve faster analysis times and higher productivity while maintaining excellent separation performance.<h3>Kinetex Core-Shell Performance on Any LC System</h3>The 5 versatile particle sizes allow you to select the best fit for your instrument.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_5_particle_sizes_bbed75c36f.jpg" alt="Phenomenex: Five versatile particle sizes of Kinetex Core-Shell Technology Columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_5_particle_sizes_bbed75c36f.jpg 245w," sizes="100vw" width="1341" height="333"><h3>Particle Chemistry</h3>Using sol-gel processing techniques that incorporate nano-structuring technology, a durable, homogeneous porous shell is grown on a solid silica core to create a Kinetex Core-Shell particle. This particle morphology results in less band broadening for all four sources of UHPLC band broadening compared to fully porous particles and thus delivers extremely high efficiencies.<ul><li>Optimized for Ultra-High Performance</li><li>Superior Core-Shell Quality</li><li>Core-Shell Scalability and Portability</li></ul>Kinetex particles are characterized by an exceptionally consistent size distribution, with particles being nearly monodispersed, meaning they are uniform in size. This precise uniformity plays a crucial role in minimizing variability within the column, leading to enhanced separation efficiency and sharper peaks.The nearly monodispersed nature of these particles ensures that the flow of the mobile phase remains consistent, reducing the likelihood of irregularities that can impact results. As a result, Kinetex columns deliver highly reliable and reproducible performance, making them ideal for achieving consistent analytical outcomes acrLC Kinetex Core-Shell Technolooss various applications.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_Kinetex_Polar_C18_vs_Fully_Porous_phase_a2729b64e5.jpg" alt="Phenomenex: Kinetex Polar C18 vs Fully Porous phase" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_Kinetex_Polar_C18_vs_Fully_Porous_phase_a2729b64e5.jpg 245w," sizes="100vw" width="1376" height="581"><h3>Core-shell vs Fully Porous</h3><h4>High-Efficiency‚ High-Density Particle</h4>The combination of a consistent, solid, high-density core along with proprietary column packing technologies in the Kinetex HPLC column ensures optimum bed structure and high column performance. This carefully designed core structure promotes uniform packing of the particles, which is essential for minimizing band-broadening effects that can arise from Eddy Diffusion.The manufacturing process of Kinetex columns is tightly controlled, focusing on factors such as particle size distribution, surface and bonding homogeneity, and packing quality. This meticulous engineering leads to uniform packing and minimized band-broadening, resulting in superior separation efficiency.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Core_shell_vs_Fully_Porous_60601b6fa3.jpg" alt="Phenomenex: Core-shell vs Fully Porous.jpg" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Core_shell_vs_Fully_Porous_60601b6fa3.jpg 245w," sizes="100vw" width="904" height="506"><h3>Expand Your Core-Shell Selectivity Toolbox</h3>Kinetex core-shell particle LC columns deliver exceptional performance enhancements across any LC system, offering unmatched efficiency and resolution. With a choice of 11 diverse stationary phases, these columns cater to a wide range of chromatographic applications, ensuring optimal separation for various analytes.Additionally, the availability of five versatile particle sizes allows for precise method tailoring, enabling both high-speed and high-resolution separations. Whether you're using HPLC or UHPLC systems, Kinetex columns provide the flexibility and performance needed to achieve superior analytical results.<h3>Top 5 Pros of Kinetex Core-Shell Technology</h3><ul><li>Productivity: Kinetex Core-Shell Technology significantly enhances method productivity with minimal effort. By simply replacing traditional, fully porous columns with Kinetex HPLC columns, users can achieve better resolution, sensitivity, and overall productivity without extensive method redevelopment. This easy switch allows for immediate improvements in chromatographic performance, making it a cost-effective upgrade to existing methods.</li><li>Portability The Kinetex Core-Shell columns are available in a range of particle sizes (1.3 µm to 5 µm), which ensures method portability across different HPLC and UHPLC systems. This scalability allows for consistent retention and selectivity across various particle sizes while accommodating different backpressure levels, making it easier to transfer methods between instruments.</li><li>Performance Kinetex Core-Shell Technology delivers superior chromatographic efficiency compared to fully porous particles. This efficiency boost enables chromatographers to maximize the performance of their HPLC/UHPLC systems, ensuring optimal results with higher resolution and sharper peaks, even under similar method conditions.</li><li>Phases With 11 unique phase selectivities available, Kinetex Core-Shell Technology offers unmatched versatility for method development. This wide selection of phase chemistries allows for tailored separations and simplified optimization, ensuring the best possible results for a wide range of applications.</li><li>Pressure Kinetex Core-Shell columns provide higher efficiency at lower system backpressures compared to fully porous columns. This allows users to achieve superior chromatographic performance on conventional LC instruments without the need for ultra-high-pressure systems, making it a practical choice for routine analyses.</li></ul>

Phenomenex Kinetex Core-Shell C8 HPLC Columns

The Kinetex C8 HPLC column is a core-shell-based particle with a bonded silica phase ideal for the analysis of very hydrophobic compounds. 

Hydrophilic Polar Selectivity and Performance!The Kinetex C8 HPLC column is a core-shell-based particle with a bonded silica phase ideal for the analysis of very hydrophobic compounds. This versatile column can easily upgrade existing fully porous 5 µm and 3 µm methods to shorten run-time, increase sensitivity, and even provide greater resolution with much higher efﬁciency levels.<ul><li>Compatible with All Analytical HPLC/UHPLC Systems*</li><li>Balancing Performance &amp; Retention</li><li>USP:L7</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Kinetex_Core_Shell_C8_HPLC_Column_eb663e39df.webp" alt="Phenomenex: Kinetex Core-Shell C8 HPLC Column" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Kinetex_Core_Shell_C8_HPLC_Column_eb663e39df.webp 245w," sizes="100vw" width="500" height="150"><ul><li>Carbon Load: 8 (effective), 8 (effective) %</li><li>Surface Area (m²/g): 200</li><li>Particle Size (μm): 1.7, 2.6, 5</li><li>Recommended Use: Minimized hydrophobic retention for highly hydrophobic compounds</li></ul><h4>Balancing Speed and Retention</h4>The Kinetex core-shell C8 provides the same Kinetex performance but with a little less hydrophobic retention in comparison to the Kinetex C18 column. This C8 column is ideal for extremely hydrophobic compounds that might be too strongly retained on a traditional C18 phase column.<blockquote>Stationary phase Kinetex Core-Shell C8 is provided in these column types: analytical and preparative</blockquote><h3>Kinetex Core-Shell Technology Columns</h3>Kinetex Core-Shell Technology delivers dramatic improvements in efficiency over conventional fully porous media, which can be leveraged to increase resolution, significantly improve productivity, reduce solvent consumption, and decrease costs. Whether you are running high-performance liquid chromatography (HPLC) or ultra-high performance liquid chromatography (UHPLC) methods, the Kinetex core-shell family can deliver shockingly improved performance over the current column you are using. Phenomenex designs, manufactures, and sells its very own silica and organo-silica core-shell particles.Advantages of Kinetex HPLC Columns<ul><li>Performance gains on ANY liquid chromatography system</li><li>System-to-system and lab-to-lab method portability</li><li>Improve the productivity of older, established methods.</li></ul><h4>How Does Core-Shell Technology Work?</h4>Core-shell technology in chromatography is a revolutionary approach that enhances the efficiency of HPLC systems while minimizing costs. Core-shell particles are designed with a solid, non-porous silica core surrounded by a porous outer layer. This unique structure allows for faster analyte mass transfer between the mobile and stationary phases, as diffusion occurs only through the thin, porous shell rather than the entire particle. This minimizes band broadening, leading to higher separation efficiency and sharper peaks.The consistency in size and shape of core-shell particles further enhances separation efficiency by reducing variability in analyte movement. As a result, core-shell HPLC columns provide high efficiency and resolution at lower backpressures, making them an ideal choice for labs looking to improve their existing HPLC systems without the need for costly UHPLC equipment.Core-shell technology thus offers a cost-effective alternative to upgrading to UHPLC systems, enabling labs to maximize the efficiency of their current HPLC setups. The formation of these particles through advanced sol-gel processing techniques ensures uniformity and reliability, making them a valuable tool in modern chromatography. By using the Kinetex HPLC column, laboratories can achieve faster analysis times and higher productivity while maintaining excellent separation performance.<h3>Kinetex Core-Shell Performance on Any LC System</h3>The 5 versatile particle sizes allow you to select the best fit for your instrument.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_5_particle_sizes_bbed75c36f.jpg" alt="Phenomenex: Five versatile particle sizes of Kinetex Core-Shell Technology Columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_5_particle_sizes_bbed75c36f.jpg 245w," sizes="100vw" width="1341" height="333"><h3>Particle Chemistry</h3>Using sol-gel processing techniques that incorporate nano-structuring technology, a durable, homogeneous porous shell is grown on a solid silica core to create a Kinetex Core-Shell particle. This particle morphology results in less band broadening for all four sources of UHPLC band broadening compared to fully porous particles and thus delivers extremely high efficiencies.<ul><li>Optimized for Ultra-High Performance</li><li>Superior Core-Shell Quality</li><li>Core-Shell Scalability and Portability</li></ul>Kinetex particles are characterized by an exceptionally consistent size distribution, with particles being nearly monodispersed, meaning they are uniform in size. This precise uniformity plays a crucial role in minimizing variability within the column, leading to enhanced separation efficiency and sharper peaks.The nearly monodispersed nature of these particles ensures that the flow of the mobile phase remains consistent, reducing the likelihood of irregularities that can impact results. As a result, Kinetex columns deliver highly reliable and reproducible performance, making them ideal for achieving consistent analytical outcomes acrLC Kinetex Core-Shell Technolooss various applications.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_Kinetex_Polar_C18_vs_Fully_Porous_phase_a2729b64e5.jpg" alt="Phenomenex: Kinetex Polar C18 vs Fully Porous phase" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_Kinetex_Polar_C18_vs_Fully_Porous_phase_a2729b64e5.jpg 245w," sizes="100vw" width="1376" height="581"><h3>Core-shell vs Fully Porous</h3><h4>High-Efficiency‚ High-Density Particle</h4>The combination of a consistent, solid, high-density core along with proprietary column packing technologies in the Kinetex HPLC column ensures optimum bed structure and high column performance. This carefully designed core structure promotes uniform packing of the particles, which is essential for minimizing band-broadening effects that can arise from Eddy Diffusion.The manufacturing process of Kinetex columns is tightly controlled, focusing on factors such as particle size distribution, surface and bonding homogeneity, and packing quality. This meticulous engineering leads to uniform packing and minimized band-broadening, resulting in superior separation efficiency.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Core_shell_vs_Fully_Porous_60601b6fa3.jpg" alt="Phenomenex: Core-shell vs Fully Porous.jpg" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Core_shell_vs_Fully_Porous_60601b6fa3.jpg 245w," sizes="100vw" width="904" height="506"><h3>Expand Your Core-Shell Selectivity Toolbox</h3>Kinetex core-shell particle LC columns deliver exceptional performance enhancements across any LC system, offering unmatched efficiency and resolution. With a choice of 11 diverse stationary phases, these columns cater to a wide range of chromatographic applications, ensuring optimal separation for various analytes.Additionally, the availability of five versatile particle sizes allows for precise method tailoring, enabling both high-speed and high-resolution separations. Whether you're using HPLC or UHPLC systems, Kinetex columns provide the flexibility and performance needed to achieve superior analytical results.<h3>Top 5 Pros of Kinetex Core-Shell Technology</h3><ul><li>Productivity: Kinetex Core-Shell Technology significantly enhances method productivity with minimal effort. By simply replacing traditional, fully porous columns with Kinetex HPLC columns, users can achieve better resolution, sensitivity, and overall productivity without extensive method redevelopment. This easy switch allows for immediate improvements in chromatographic performance, making it a cost-effective upgrade to existing methods.</li><li>Portability The Kinetex Core-Shell columns are available in a range of particle sizes (1.3 µm to 5 µm), which ensures method portability across different HPLC and UHPLC systems. This scalability allows for consistent retention and selectivity across various particle sizes while accommodating different backpressure levels, making it easier to transfer methods between instruments.</li><li>Performance Kinetex Core-Shell Technology delivers superior chromatographic efficiency compared to fully porous particles. This efficiency boost enables chromatographers to maximize the performance of their HPLC/UHPLC systems, ensuring optimal results with higher resolution and sharper peaks, even under similar method conditions.</li><li>Phases With 11 unique phase selectivities available, Kinetex Core-Shell Technology offers unmatched versatility for method development. This wide selection of phase chemistries allows for tailored separations and simplified optimization, ensuring the best possible results for a wide range of applications.</li><li>Pressure Kinetex Core-Shell columns provide higher efficiency at lower system backpressures compared to fully porous columns. This allows users to achieve superior chromatographic performance on conventional LC instruments without the need for ultra-high-pressure systems, making it a practical choice for routine analyses.</li></ul>

Phenomenex Kinetex PAH Core-Shell HPLC Columns

Controlled pore processing and a proprietary polymer-bonded phase ensure excellent resolution of priority PAHs.

Innovative Polymerically Bonded C18Controlled pore size processing and a proprietary polymerically bonded stationary phase were developed to ensure excellent resolution between priority polycyclic aromatic hydrocarbons (PAHs). Combined with core shell particle technology, incredibly high efficiency and sensitivity at comfortable LC pressures is very achievable.<ul><li>Compatible with All Analytical HPLC/UHPLC Systems</li><li>Unique Polycyclic Aromatic Selectivity for PAHs (USP:L118)</li><li>3.5 µm Particle Size for Performance on HPLC or UHPLC Systems</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Kinetex_PAH_Core_Shell_HPLC_Column_c8745f3c2e.webp" alt="Phenomenex: Kinetex PAH Core-Shell HPLC Column" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Kinetex_PAH_Core_Shell_HPLC_Column_c8745f3c2e.webp 245w," sizes="100vw" width="500" height="150"><ul><li>Carbon Load: null %</li><li>Particle Size: 3.5</li><li>Recommended Use: Polymerically bonded C18 phase specifically developed for the separation of EU and EPA priority PAHs.</li></ul><h4>Selectivity for PAH Compounds</h4>The Kinetex PAH is specifically developed to be the first Core-Shell based LC product for PAH analysis. Perform high resolution PAH separations with fast run times on both HPLC or UHPLC instrumentation with the Kinetex 3.5 µm PAH column.<h4>QC Tested for PAHs (EPA 610)</h4>Ultimately, Kinetex PAH will provide expanded resolution with chemical selectivity specifically for PAHs. It will also increase HPLC/UHPLC throughput and sensitivity with core-shell technology.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Kinetex_PAH_EPA_610_PAH_Analysis_2f57cfc2b4.jpg" alt="Phenomenex: Kinetex PAH Core-Shell HPLC Column - EPA 610 PAH Analysis" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Kinetex_PAH_EPA_610_PAH_Analysis_2f57cfc2b4.jpg 245w," sizes="100vw" width="3413" height="1963"><h3>Kinetex Core-Shell Technology Columns</h3>Kinetex Core-Shell Technology delivers dramatic improvements in efficiency over conventional fully porous media, which can be leveraged to increase resolution, significantly improve productivity, reduce solvent consumption, and decrease costs. Whether you are running high-performance liquid chromatography (HPLC) or ultra-high performance liquid chromatography (UHPLC) methods, the Kinetex core-shell family can deliver shockingly improved performance over the current column you are using. Phenomenex designs, manufactures, and sells its very own silica and organo-silica core-shell particles.Advantages of Kinetex HPLC Columns<ul><li>Performance gains on ANY liquid chromatography system</li><li>System-to-system and lab-to-lab method portability</li><li>Improve the productivity of older, established methods.</li></ul><h4>How Does Core-Shell Technology Work?</h4>Core-shell technology in chromatography is a revolutionary approach that enhances the efficiency of HPLC systems while minimizing costs. Core-shell particles are designed with a solid, non-porous silica core surrounded by a porous outer layer. This unique structure allows for faster analyte mass transfer between the mobile and stationary phases, as diffusion occurs only through the thin, porous shell rather than the entire particle. This minimizes band broadening, leading to higher separation efficiency and sharper peaks.The consistency in size and shape of core-shell particles further enhances separation efficiency by reducing variability in analyte movement. As a result, core-shell HPLC columns provide high efficiency and resolution at lower backpressures, making them an ideal choice for labs looking to improve their existing HPLC systems without the need for costly UHPLC equipment.Core-shell technology thus offers a cost-effective alternative to upgrading to UHPLC systems, enabling labs to maximize the efficiency of their current HPLC setups. The formation of these particles through advanced sol-gel processing techniques ensures uniformity and reliability, making them a valuable tool in modern chromatography. By using the Kinetex HPLC column, laboratories can achieve faster analysis times and higher productivity while maintaining excellent separation performance.<h3>Kinetex Core-Shell Performance on Any LC System</h3>The 5 versatile particle sizes allow you to select the best fit for your instrument.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_5_particle_sizes_bbed75c36f.jpg" alt="Phenomenex: Five versatile particle sizes of Kinetex Core-Shell Technology Columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_5_particle_sizes_bbed75c36f.jpg 245w," sizes="100vw" width="1341" height="333"><h3>Particle Chemistry</h3>Using sol-gel processing techniques that incorporate nano-structuring technology, a durable, homogeneous porous shell is grown on a solid silica core to create a Kinetex Core-Shell particle. This particle morphology results in less band broadening for all four sources of UHPLC band broadening compared to fully porous particles and thus delivers extremely high efficiencies.<ul><li>Optimized for Ultra-High Performance</li><li>Superior Core-Shell Quality</li><li>Core-Shell Scalability and Portability</li></ul>Kinetex particles are characterized by an exceptionally consistent size distribution, with particles being nearly monodispersed, meaning they are uniform in size. This precise uniformity plays a crucial role in minimizing variability within the column, leading to enhanced separation efficiency and sharper peaks.The nearly monodispersed nature of these particles ensures that the flow of the mobile phase remains consistent, reducing the likelihood of irregularities that can impact results. As a result, Kinetex columns deliver highly reliable and reproducible performance, making them ideal for achieving consistent analytical outcomes acrLC Kinetex Core-Shell Technolooss various applications.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_Kinetex_Polar_C18_vs_Fully_Porous_phase_a2729b64e5.jpg" alt="Phenomenex: Kinetex Polar C18 vs Fully Porous phase" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_Kinetex_Polar_C18_vs_Fully_Porous_phase_a2729b64e5.jpg 245w," sizes="100vw" width="1376" height="581"><h3>Core-shell vs Fully Porous</h3><h4>High-Efficiency‚ High-Density Particle</h4>The combination of a consistent, solid, high-density core along with proprietary column packing technologies in the Kinetex HPLC column ensures optimum bed structure and high column performance. This carefully designed core structure promotes uniform packing of the particles, which is essential for minimizing band-broadening effects that can arise from Eddy Diffusion.The manufacturing process of Kinetex columns is tightly controlled, focusing on factors such as particle size distribution, surface and bonding homogeneity, and packing quality. This meticulous engineering leads to uniform packing and minimized band-broadening, resulting in superior separation efficiency.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Core_shell_vs_Fully_Porous_60601b6fa3.jpg" alt="Phenomenex: Core-shell vs Fully Porous.jpg" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Core_shell_vs_Fully_Porous_60601b6fa3.jpg 245w," sizes="100vw" width="904" height="506"><h3>Expand Your Core-Shell Selectivity Toolbox</h3>Kinetex core-shell particle LC columns deliver exceptional performance enhancements across any LC system, offering unmatched efficiency and resolution. With a choice of 11 diverse stationary phases, these columns cater to a wide range of chromatographic applications, ensuring optimal separation for various analytes.Additionally, the availability of five versatile particle sizes allows for precise method tailoring, enabling both high-speed and high-resolution separations. Whether you're using HPLC or UHPLC systems, Kinetex columns provide the flexibility and performance needed to achieve superior analytical results.<h3>Top 5 Pros of Kinetex Core-Shell Technology</h3><ul><li>Productivity: Kinetex Core-Shell Technology significantly enhances method productivity with minimal effort. By simply replacing traditional, fully porous columns with Kinetex HPLC columns, users can achieve better resolution, sensitivity, and overall productivity without extensive method redevelopment. This easy switch allows for immediate improvements in chromatographic performance, making it a cost-effective upgrade to existing methods.</li><li>Portability The Kinetex Core-Shell columns are available in a range of particle sizes (1.3 µm to 5 µm), which ensures method portability across different HPLC and UHPLC systems. This scalability allows for consistent retention and selectivity across various particle sizes while accommodating different backpressure levels, making it easier to transfer methods between instruments.</li><li>Performance Kinetex Core-Shell Technology delivers superior chromatographic efficiency compared to fully porous particles. This efficiency boost enables chromatographers to maximize the performance of their HPLC/UHPLC systems, ensuring optimal results with higher resolution and sharper peaks, even under similar method conditions.</li><li>Phases With 11 unique phase selectivities available, Kinetex Core-Shell Technology offers unmatched versatility for method development. This wide selection of phase chemistries allows for tailored separations and simplified optimization, ensuring the best possible results for a wide range of applications.</li><li>Pressure Kinetex Core-Shell columns provide higher efficiency at lower system backpressures compared to fully porous columns. This allows users to achieve superior chromatographic performance on conventional LC instruments without the need for ultra-high-pressure systems, making it a practical choice for routine analyses.</li></ul>

Phenomenex Kinetex Core-Shell HILIC HPLC Columns

Kinetex HILIC is a core-shell particle with unbonded silica, providing selectivity for retaining and separating polar compounds in HILIC chromatography.

Hydrophilic Polar Selectivity and Performance!The Kinetex HILIC is a core shell based particle with a unbonded silica phase is used under hydrophilic interaction chromatography conditions to provide the selectivity needed for the retention and separation of polar compounds. This versatile column can easily upgrade existing fully porous 5 µm and 3 µm methods to shorten run time, increase sensitivity, and even provide greater resolution with much higher efficiency levels.<ul><li>Compatible with All Analytical HPLC/UHPLC Systems</li><li>Unique Polar Retentive L3 Silica</li><li>Unbonded Silica Phase</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Kinetex_Core_Shell_HILIC_HPLC_Column_9ff82b0e20.webp" alt="Phenomenex: Kinetex Core-Shell HILIC HPLC Column" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Kinetex_Core_Shell_HILIC_HPLC_Column_9ff82b0e20.webp 245w," sizes="100vw" width="500" height="150"><ul><li>Carbon Load: 0 %</li><li>Particle Size (μm): 1.7, 2.6, 5</li><li>Recommended Use: Retention and separation of polar compounds hydrophilic interaction chromatography conditions</li></ul><h4>Alternative Polar Selectivity to a C18 &nbsp;</h4>A Core-Shell based silica phase that combines high-performance with novel polar HILIC selectivity.<h4>Increase Polar Retention</h4>Used under HILIC running conditions, this phase provides the highest polar selectivity for retention and separation of hydrophilic compounds.<blockquote>Stationary phase Kinetex Core-Shell HILIC is provided in these column types: analytical and preparative</blockquote><h3>Kinetex Core-Shell Technology Columns</h3>Kinetex Core-Shell Technology delivers dramatic improvements in efficiency over conventional fully porous media, which can be leveraged to increase resolution, significantly improve productivity, reduce solvent consumption, and decrease costs. Whether you are running high-performance liquid chromatography (HPLC) or ultra-high performance liquid chromatography (UHPLC) methods, the Kinetex core-shell family can deliver shockingly improved performance over the current column you are using. Phenomenex designs, manufactures, and sells its very own silica and organo-silica core-shell particles.Advantages of Kinetex HPLC Columns<ul><li>Performance gains on ANY liquid chromatography system</li><li>System-to-system and lab-to-lab method portability</li><li>Improve the productivity of older, established methods.</li></ul><h4>How Does Core-Shell Technology Work?</h4>Core-shell technology in chromatography is a revolutionary approach that enhances the efficiency of HPLC systems while minimizing costs. Core-shell particles are designed with a solid, non-porous silica core surrounded by a porous outer layer. This unique structure allows for faster analyte mass transfer between the mobile and stationary phases, as diffusion occurs only through the thin, porous shell rather than the entire particle. This minimizes band broadening, leading to higher separation efficiency and sharper peaks.The consistency in size and shape of core-shell particles further enhances separation efficiency by reducing variability in analyte movement. As a result, core-shell HPLC columns provide high efficiency and resolution at lower backpressures, making them an ideal choice for labs looking to improve their existing HPLC systems without the need for costly UHPLC equipment.Core-shell technology thus offers a cost-effective alternative to upgrading to UHPLC systems, enabling labs to maximize the efficiency of their current HPLC setups. The formation of these particles through advanced sol-gel processing techniques ensures uniformity and reliability, making them a valuable tool in modern chromatography. By using the Kinetex HPLC column, laboratories can achieve faster analysis times and higher productivity while maintaining excellent separation performance.<h3>Kinetex Core-Shell Performance on Any LC System</h3>The 5 versatile particle sizes allow you to select the best fit for your instrument.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_5_particle_sizes_bbed75c36f.jpg" alt="Phenomenex: Five versatile particle sizes of Kinetex Core-Shell Technology Columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_5_particle_sizes_bbed75c36f.jpg 245w," sizes="100vw" width="1341" height="333"><h3>Particle Chemistry</h3>Using sol-gel processing techniques that incorporate nano-structuring technology, a durable, homogeneous porous shell is grown on a solid silica core to create a Kinetex Core-Shell particle. This particle morphology results in less band broadening for all four sources of UHPLC band broadening compared to fully porous particles and thus delivers extremely high efficiencies.<ul><li>Optimized for Ultra-High Performance</li><li>Superior Core-Shell Quality</li><li>Core-Shell Scalability and Portability</li></ul>Kinetex particles are characterized by an exceptionally consistent size distribution, with particles being nearly monodispersed, meaning they are uniform in size. This precise uniformity plays a crucial role in minimizing variability within the column, leading to enhanced separation efficiency and sharper peaks.The nearly monodispersed nature of these particles ensures that the flow of the mobile phase remains consistent, reducing the likelihood of irregularities that can impact results. As a result, Kinetex columns deliver highly reliable and reproducible performance, making them ideal for achieving consistent analytical outcomes acrLC Kinetex Core-Shell Technolooss various applications.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_Kinetex_Polar_C18_vs_Fully_Porous_phase_a2729b64e5.jpg" alt="Phenomenex: Kinetex Polar C18 vs Fully Porous phase" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_HPLC_and_UHPLC_Kinetex_Core_Shell_Technology_Columns_Kinetex_Polar_C18_vs_Fully_Porous_phase_a2729b64e5.jpg 245w," sizes="100vw" width="1376" height="581"><h3>Core-shell vs Fully Porous</h3><h4>High-Efficiency‚ High-Density Particle</h4>The combination of a consistent, solid, high-density core along with proprietary column packing technologies in the Kinetex HPLC column ensures optimum bed structure and high column performance. This carefully designed core structure promotes uniform packing of the particles, which is essential for minimizing band-broadening effects that can arise from Eddy Diffusion.The manufacturing process of Kinetex columns is tightly controlled, focusing on factors such as particle size distribution, surface and bonding homogeneity, and packing quality. This meticulous engineering leads to uniform packing and minimized band-broadening, resulting in superior separation efficiency.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Core_shell_vs_Fully_Porous_60601b6fa3.jpg" alt="Phenomenex: Core-shell vs Fully Porous.jpg" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Core_shell_vs_Fully_Porous_60601b6fa3.jpg 245w," sizes="100vw" width="904" height="506"><h3>Expand Your Core-Shell Selectivity Toolbox</h3>Kinetex core-shell particle LC columns deliver exceptional performance enhancements across any LC system, offering unmatched efficiency and resolution. With a choice of 11 diverse stationary phases, these columns cater to a wide range of chromatographic applications, ensuring optimal separation for various analytes.Additionally, the availability of five versatile particle sizes allows for precise method tailoring, enabling both high-speed and high-resolution separations. Whether you're using HPLC or UHPLC systems, Kinetex columns provide the flexibility and performance needed to achieve superior analytical results.<h3>Top 5 Pros of Kinetex Core-Shell Technology</h3><ul><li>Productivity: Kinetex Core-Shell Technology significantly enhances method productivity with minimal effort. By simply replacing traditional, fully porous columns with Kinetex HPLC columns, users can achieve better resolution, sensitivity, and overall productivity without extensive method redevelopment. This easy switch allows for immediate improvements in chromatographic performance, making it a cost-effective upgrade to existing methods.</li><li>Portability The Kinetex Core-Shell columns are available in a range of particle sizes (1.3 µm to 5 µm), which ensures method portability across different HPLC and UHPLC systems. This scalability allows for consistent retention and selectivity across various particle sizes while accommodating different backpressure levels, making it easier to transfer methods between instruments.</li><li>Performance Kinetex Core-Shell Technology delivers superior chromatographic efficiency compared to fully porous particles. This efficiency boost enables chromatographers to maximize the performance of their HPLC/UHPLC systems, ensuring optimal results with higher resolution and sharper peaks, even under similar method conditions.</li><li>Phases With 11 unique phase selectivities available, Kinetex Core-Shell Technology offers unmatched versatility for method development. This wide selection of phase chemistries allows for tailored separations and simplified optimization, ensuring the best possible results for a wide range of applications.</li><li>Pressure Kinetex Core-Shell columns provide higher efficiency at lower system backpressures compared to fully porous columns. This allows users to achieve superior chromatographic performance on conventional LC instruments without the need for ultra-high-pressure systems, making it a practical choice for routine analyses.</li></ul>

Phenomenex Luna PFP(2) HPLC Columns

The Luna PFP(2) is a pentafluorophenyl phase with strongly electronegative fluorine groups to provide polar selectivity for cationic compounds.

The Luna PFP(2) is a pentafluorophenyl phase with strongly electronegative fluorine groups to provide polar selectivity for cationic compounds, while the rigid bonded phase is a good steric selector.<ul><li>Extremely discerning for halogenated‚ aromatic and conjugated compounds</li><li>Provides orthogonal selectivity even using traditional reversed phase mobile phase systems</li><li>PFP Ultra pure, metal-free silica (99.99 % purity) (USP: L43)/li&gt;</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Luna_PFP_2_HPLC_Column_9750ad436d.webp" alt="Phenomenex: Luna PFP(2) HPLC Column" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Luna_PFP_2_HPLC_Column_9750ad436d.webp 245w," sizes="100vw" width="500" height="150"><ul><li>Surface Area (m²/g): 400</li><li>Particle Size: 3, 5</li><li>Recommended Use: Separation of aromatic, halogenated, and closely related compounds</li></ul><h4>Long Column Lifetimes and Excellent Performance</h4>Ultra-pure, metal-free silica (99.99 % purity) is the backbone of all Luna material. The resulting high quality particles have a surface smoothness, pore structure, and pore consistency to ensure a more uniform particle shape and greater reproducibility.<h4>Superior Particle Smoothness</h4><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Superior_Particle_Smoothness_of_Luna_C18_f44c5b3028.jpg" alt="Phenomenex: Superior Particle Smoothness of Luna Columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Superior_Particle_Smoothness_of_Luna_C18_f44c5b3028.jpg 245w," sizes="100vw" width="1385" height="442"><h4>4 Mechanisms of Interaction</h4>Luna® PFP(2) columns provide unique selectivity for highly polar compounds, complex natural products, isomers and other closely related compounds. This is achieved by using a propyl linked pentafluorophenyl, which provides multiple retention mechanisms unique to typical reversed phase medias.<ul><li>Hydrogen Bonding</li><li>Dipole-Dipole Interactions</li><li>Aromatic and π-π Interactions</li><li>Hydrophobic</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Luna_PFP_2_Column_selectivity_c7b9591ed6.jpg" alt="Phenomenex: Luna PFP(2) Column selectivity." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Luna_PFP_2_Column_selectivity_c7b9591ed6.jpg 193w," sizes="100vw" width="863" height="698"><h4>Common Applications:</h4><ul><li>Positional isomers, Geometric isomers, Taxanes, Aflatoxins</li></ul><blockquote>Stationary phase Luna PFP(2) is provided in these column types: analytical, microbore, minibore, midbore, semi-preparative and preparative</blockquote><h5>Luna PFP(2) HPLC Microbore, Minibore, MidBore, Analytical and Semi-preparative Columns are available with these parameters:</h5>Microbore Columns<ul><li>Column length (mm): 150</li><li>Column ID (mm): 1</li><li>Particle size (µm): 3</li></ul>Minibore Columns<ul><li>Column length (mm): 30, 50, 100, 150</li><li>Column ID (mm): 2</li><li>Particle size (µm): 3, 5</li></ul>MidBore Columns<ul><li>Column length (mm): 50, 150</li><li>Column ID (mm): 3</li><li>Particle size (µm): 3, 5</li></ul>Analytical Columns<ul><li>Column length (mm): 50, 100, 150, 250</li><li>Column ID (mm): 4.6</li><li>Particle size (µm): 3, 5</li></ul>Semi-Prep Columns<ul><li>Column length (mm): 250</li><li>Column ID (mm): 10</li><li>Particle size (µm): 5</li></ul><h3>Phenomenex Luna HPLC Columns</h3>Luna HPLC columns are renowned for their outstanding reliability and adaptability in high-performance liquid chromatography (HPLC). Manufactured by Phenomenex, Luna HPLC columns are made from 99.999% ultra-pure, metal-free silica, with meticulous attention given to quality control across all aspects of its structure and chemistry. This guarantees that Luna columns consistently deliver reliable performance, ensuring dependable method reproducibility. The Luna series offers diverse selectivity, making it suitable for a broad range of chromatographic applications, from microbore and fast LC to preparative and bulk purification scales.All Luna products uphold the high standards our customers depend on. Featuring high surface area particles, Luna columns deliver improved resolution and performance, meeting the stringent requirements of HPLC users. Designed for longevity and consistent results, these columns are the trusted choice for both routine analyses and specialized separations, ensuring top-tier chromatographic outcomes.<h4>Explore Luna Columns</h4><ul><li>Proven Performance: Extensive line of rugged USP and Ph.Eur. phases</li><li>Maximum Reproducibility: Each column has both a certificate of analysis and a certificate of quality assurance</li><li>Ultra-High Purity: Metal free silica (99.99% purity) &nbsp;ensures a low activity surface and less secondary interactions</li><li>Scalable: Phases available in 3,5, 10 and 15 µm particle size for scaling from analytical to prep and bulk purification</li></ul>Explore resolution with 10 unique Luna selectivities and find your next selectivity tool. Combined with high surface area the Luna family of columns offers an excellent HPLC performance for a wide range of chromatographic applications.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Phases_of_Luna_Columns_5b3ae06cee.jpg" alt="Phenomenex: Phases of Luna Columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Phases_of_Luna_Columns_5b3ae06cee.jpg 180w," sizes="100vw" width="565" height="490">

Products from Phenomenex distributed by Phenomenex - page 8

Related content

Scientists reveal when chemical bonds form in molecular collisions

News from LabRulezLCMS Library - Week 34, 2026

Seeing is Believing – Detection Made Easy Part 2: Detector Characteristics