Join us for a fascinating conversation with Dr. Subhoja Chakraborty from the University of Central Florida, whose cutting-edge research targets the global challenge of malaria drug resistance. Dr. Chakraborty shares her journey from structure-based drug design during her PhD to her recent collaborative work repurposing human kinase inhibitors as rapid, selective antimalarials against drug-resistant Plasmodium falciparum strains.<h4>In this episode, you'll learn:</h4><ul><li>How structure-guided approaches reveal potential drug targets, including cysteine proteases like falcipain-2, and kinases implicated in malaria's complex life cycle.</li><li>The power of repurposing kinase inhibitors originally developed for cancer and other diseases, focusing on compound 12, which blocks hemozoin formation and protein kinase 6—key steps in parasite survival.</li><li>Lab techniques such as affinity, gel filtration, and size exclusion chromatography for recombinant protein purification—and how troubleshooting is crucial for high-yield, stable complexes.</li><li>Advances in mass spectrometry for characterizing protein interactions, validating drug targets, and mapping molecular pathways pivotal to malaria therapeutics.</li><li>Tips and lessons for new researchers facing the challenges of sample preparation, complex protocols, and working as part of a collaborative team.</li></ul>Dr. Chakraborty’s insights bridge the gap between basic science and translational drug discovery, offering hope for more effective, targeted malaria treatments in a world where resistance to frontline therapies threatens millions.<h4>Referenced Papers:</h4><ul><li>"Plasmodium falciparum protein kinase 6 and hemozoin formation are inhibited by a type II human kinase inhibitor exhibiting antimalarial activity" (Cell Chemical Biology, 2025)</li><li>"New insights of falcipain 2 structure from Plasmodium falciparum 3D7 strain" (BBRC, 2022)</li><li>"Structure-Based Optimization of Protease−Inhibitor Interactions to Enhance Specificity of Human Stefin‑A against Falcipain‑2 from the Plasmodium falciparum 3D7 Strain" (Biochemistry, 2023)</li></ul>If you’re a student, scientist, or simply passionate about advances in infectious disease research, this episode offers actionable insights, inspiring advice, and a front-row seat to innovation in combating malaria.<h3>Video Transcription</h3><h4>From Structural Biology to Drug Discovery: Chromatography and Mass Spectrometry in Malaria Research</h4><h5>Introduction</h5>In this discussion, Subhoja shares insights into her research journey, focusing on malaria drug discovery and the role of modern analytical techniques in biological and biomedical research. The conversation is aimed primarily at undergraduate students and early-career researchers interested in chemistry, biotechnology, and life sciences.<h5>Research Focus: Malaria Drug Discovery and Kinase Targets</h5>Subhoja is currently involved in malaria drug discovery research at the University of Central Florida, where she has been working since beginning her postdoctoral position two years ago. Her earlier PhD research focused on structure-based drug design in malaria, using a combination of in silico approaches, recombinant protein expression, and X-ray crystallography to determine precise three-dimensional structures of target proteins and their inhibitors.This structural perspective provided a foundation for her current work, which centers on drug discovery through compound screening and repurposing. A recent publication from her laboratory explores the use of repurposed mammalian CDK-like kinase inhibitors as potential antimalarial agents. While such kinase inhibitors are well known in cancer and cardiovascular research, their application to malaria targets represents a novel and promising approach.Kinases are attractive drug targets because of their central role in cell signaling and growth pathways. By targeting specific kinases involved in different stages of the malaria parasite life cycle—whether asexual growth, gametocytogenesis, or differentiation—it may be possible to significantly inhibit parasite growth and progression.<h5>Chromatography in Protein Expression and Purification Workflows</h5>Chromatography plays a critical role throughout Subhoja’s research. Her experience spans from basic chromatography techniques during her early training to advanced protein purification workflows using affinity chromatography, gel filtration (size exclusion chromatography), and ion exchange chromatography.Recombinant proteins are routinely purified using affinity resins such as nickel or cobalt, followed by further purification to remove contaminants. Fast Protein Liquid Chromatography (FPLC) enables compact, stepwise purification workflows suitable for producing proteins for in vitro assays.A recurring challenge in this process is the expression of high-molecular-weight proteins, which often accumulate in insoluble fractions or inclusion bodies. Careful selection of expression vectors, host systems, and induction conditions is therefore essential to maximize yield and solubility.<h5>Integrating Size Exclusion Chromatography into the Workflow</h5>Size exclusion chromatography (SEC) is typically used after affinity purification to further improve protein purity. Following elution with imidazole or glutathione, desalting is required to prevent buffer components from interfering with downstream assays. This is often achieved using desalting columns such as G-25 or PD-10.To remove lower-molecular-weight contaminants, finer SEC media—such as Superdex or Sephacryl columns—are employed. Concentration steps using molecular-weight cut-off filters are then applied to obtain the desired protein concentration for functional studies.These iterative purification and troubleshooting steps are a routine part of protein biochemistry and reflect the importance of methodical optimization and careful validation.<h5>The Role of Mass Spectrometry in Biomolecular Characterization</h5>Mass spectrometry is a key analytical tool in Subhoja’s research pipeline, particularly for target identification and validation. In both malaria and cancer research, MS is used alongside chromatography, immunoprecipitation, and pull-down assays to study protein interactions and molecular recognition events.Affinity-based mass spectrometry enables the identification of binding partners and interactors, whether studying proteins, long non-coding RNAs, or protein complexes. Techniques such as native MS, tandem affinity purification, and proximity labeling (e.g., TurboID-based workflows) provide deeper insights into molecular networks and signaling pathways.These approaches are essential for understanding how candidate drug targets function within complex biological systems.<h5>Sample Preparation Challenges in Biological Research</h5>Sample preparation remains one of the most challenging aspects of biological experimentation. Whole-cell lysates contain proteases, nucleases, and other components that can rapidly degrade target molecules. Preventing degradation requires minimizing preparation time, maintaining low temperatures, and using appropriate inhibitor cocktails.Reproducibility is also critical: biological experiments require multiple replicates, and variability is often unavoidable. Careful handling, protocol optimization, and continuous troubleshooting are essential to ensure reliable results, whether preparing samples for chromatography, mass spectrometry, sequencing, or immunoprecipitation.<h5>Advances in Chromatography and MS for Malaria Research</h5>Modern advances in chromatography and mass spectrometry significantly enhance malaria research by enabling precise target identification, quantification, and functional characterization. Drug discovery workflows begin with construct design and recombinant expression, followed by purification and interaction studies.In malaria research, stage-specific parasite biology requires careful extraction and analysis of proteins from different life cycle stages. Tandem affinity MS, immunoprecipitation, and in vivo validation studies help confirm target relevance and therapeutic potential.Recent work on repurposed kinase inhibitors has shown promising results, including inhibition of hemozoin formation—a key detoxification pathway for the malaria parasite—highlighting the potential of such compounds for further development.<h5>Malaria, Drug Resistance, and Global Impact</h5>Malaria remains a major global health burden, with over 600,000 deaths annually and widespread drug resistance complicating treatment. Artemisinin resistance, particularly associated with mutations in the K13 propeller domain, has driven the search for new targets and therapies.During her PhD, Subhoja focused on falcipain-2, a cysteine protease involved in hemoglobin degradation within the parasite. This pathway is critical for parasite survival and has emerged as a promising drug target. Her work revealed that falcipain-2 operates within a larger protein complex responsible for hemoglobin processing and amino acid release.Understanding these molecular mechanisms is essential for developing robust, stage-specific antimalarial strategies.<h5>Advice for Early-Career Researchers</h5>For researchers just starting out, Subhoja emphasizes the importance of hands-on experience. Working directly with cells, lysates, and analytical tools is essential for truly understanding experimental systems. Failure is an inherent part of research, and perseverance is key.Motivation, teamwork, careful sample handling, and thorough preparation all contribute to long-term success. Reading extensively, critically evaluating one’s own work, and appreciating incremental progress are vital aspects of a sustainable research career.Every successful experiment—no matter how small—represents meaningful progress and contributes to the broader goals of science and medicine.<h5>Closing Remarks</h5>The discussion highlights how interdisciplinary approaches combining chromatography, mass spectrometry, structural biology, and biochemistry are driving advances in malaria drug discovery. Through careful experimental design, analytical rigor, and collaborative teamwork, researchers can address complex biological challenges and contribute to global health solutions.<blockquote>This text has been automatically transcribed from a video presentation using AI technology. It may contain inaccuracies and is not guaranteed to be 100% correct.</blockquote><blockquote><h4>Concentrating on Chromatography Podcast</h4>Dive into the frontiers of chromatography, mass spectrometry, and sample preparation with host David Oliva. Each episode features candid conversations with leading researchers, industry innovators, and passionate scientists who are shaping the future of analytical chemistry. From decoding PFAS detection challenges to exploring the latest in AI-assisted liquid chromatography, this show uncovers practical workflows, sustainability breakthroughs, and the real-world impact of separation science. Whether you’re a chromatographer, lab professional, or researcher you'll discover inspiring content!You can find Concentrating on Chromatography Podcast in podcast apps:<ul><li><a target="_blank" rel="noopener noreferrer" href="https://open.spotify.com/show/1wZg67rCjoGju4yhqxI3tL">Spotify</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://podcasts.apple.com/tz/podcast/concentrating-on-chromatography/id1788429185">Apple podcast</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://podscan.fm/podcasts/concentrating-on-chromatography">podscan</a></li></ul>and on <a target="_blank" rel="noopener noreferrer" href="https://www.youtube.com/@ChromatographyTalk/videos">YouTube channel</a></blockquote>

Affinity, Gel Filtration, Size Exclusion Chromatography: Repurposing Kinase Inhibitors for Malaria

In the week of February 9, the following webinars await you in the field of liquid phase and especially HPLC and LC/MS.<blockquote><h4><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinars">👉 DETAILS AND REGISTRATION IN THE WEBINARS SECTION</a></h4>👉 Search and filter in the largest global database with over 5 000 GC, LC, MS and spectroscopy webinars.</blockquote><h5>1. SelectScience: High-Throughput Stability Screening Strategies for Antibody Formulation</h5><ul><li>Tu, 10.2.2026 17:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/5807">Registration</a></li></ul>Learn how high-throughput DLS/SLS and rapid-screening DSC accelerate stability assessment of high-concentration antibody formulations, enabling faster, data-driven biologics development.<h5>2. Phenomenex: Big Scale, Big Wins – Prep Chromatography Explained</h5><ul><li>We, 11.2.2026 10:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/5793">Registration</a></li></ul>Learn how to scale analytical methods to preparative HPLC, optimize loading capacity, and understand the limits of preparative columns for pharmaceutical applications.<h5>3. ALS Czech Republic: PFAS in Food &amp; Food Contact Material</h5><ul><li>We, 11.2.2026 15:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/5816">Registration</a></li></ul>Get a practical overview of PFAS in food and food contact materials, including EU and US regulations, key analytical challenges, and reliable PFAS testing strategies.<h5>4. New Food Magazine: The Science of Next-Gen Ingredients – Fermentation, Formulation and Function</h5><ul><li>We, 11.2.2026 16:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/5720">Registration</a></li></ul>Explore how fermentation-driven innovation is transforming functional food ingredients and how advanced analytics optimize flavour, functionality, and stability.<h5>5. SCIEX: Accurate Mass Fundamentals – Interpreting and Applying Your Data</h5><ul><li>We, 11.2.2026 19:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/5772">Registration</a></li></ul>Session 3 focuses on interpreting and applying accurate mass data to confirm compound identity, move beyond basic quantitation, and troubleshoot results for confident reporting.<h5>6. Agilent Technologies: Process Analytical Techniques – Online HPLC for Real-Time Monitoring and Control of Bioprocesses</h5><ul><li>Th, 12.2.2026 06:30 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/5834">Registration</a></li></ul>Discover how PAT HPLC enables near-real-time monitoring of critical quality attributes in bioprocessing, with a case study on charge-variant control by cation-exchange chromatography.<h5>7. Thermo Fisher Scientific: Introducing the Orbitrap Excedion Pro Hybrid MS</h5><ul><li>Th, 12.2.2026 11:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/5889">Registration</a></li></ul>Discover the new Orbitrap Exploris Pro with expanded ETD/EThcD capabilities for confident biopharmaceutical characterization, including intact proteins, PTMs, ADCs, and large biomolecules.<h5>8. Waters Corporation: Planning Your NuGenesis Upgrade – Insights and Best Practices for a Smooth Transition</h5><ul><li>Th, 12.2.2026 19:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/5833">Registration</a></li></ul>Learn how to plan a successful NuGenesis upgrade, transition to Windows 11, and unlock new capabilities such as dashboards for real-time operational insights.<h5>9. Thermo Fisher Scientific: Comprehensive Analytical Strategies for Peptide Therapeutics and GLP-1 Agonists with Agilent</h5><ul><li>Th, 12.2.2026 19:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/5814">Registration</a></li></ul>Explore analytical workflows for peptide therapeutics, including method development, peptide mapping, GLP-1 QC, and LC-MS strategies across Agilent platforms.<h5>10. Agilent Technologies: Moving from R&amp;D and Limited QC on a UV-Vis-NIR Instrument to Large-Scale QC Using an Autosampler</h5><ul><li>Th, 12.2.2026 20:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/2104">Registration</a></li></ul>This webinar covers practical aspects of adding and using an autosampler to maximize UV-Vis-NIR QC workflows at scale.<h5>11. Agilent Technologies: LC Method Transfer – Hidden Challenges &amp; Absolute Solution</h5><ul><li>Fr, 13.2.2026 06:30 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/5787">Registration</a></li></ul>Discover why LC method transfer between legacy and modern systems is challenging, which hidden parameters affect retention and peak shape, and how to achieve robust, reliable results.

Webinars LabRulezLCMS Week 07/2026

Charge detection mass spectrometry (CDMS) allows direct mass determination of individual ions and is increasingly used to study heterogeneous biological samples. This work demonstrates the use of Orbitrap-based CDMS/Direct Mass Technology (DMT) for quantitative analysis of transthyretin (TTR) tetramer samples below 100 kDa, extending CDMS beyond its traditional qualitative role.DMT resolved wild-type and C-terminally modified TTR homotetramers, as well as hybrid tetramers, enabling kinetic analysis of subunit exchange and stability. The approach also quantified thyroxine binding to TTR variants, revealing differences in binding affinity linked to C-terminal modification. By separating overlapping m/z signals through charge measurement, CDMS enables accurate mass and abundance determination, highlighting its potential for quantitative analysis of complex protein systems.<blockquote><h4>The original article</h4><h4><a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acs.analchem.5c05771">Dissecting Heterogeneous Populations of Protein-Complex Samples Using Direct Mass Technology</a></h4>Robert L. Rider, Jared Hampton, Zhenyu Xi, Carter Lantz, Sangho D. Yun, Weijing Liu, Rosa Viner, Arthur Laganowsky, and David H. Russell*Anal. Chem. 2025, 97, 49, 27057–27063<a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1021/acs.analchem.5c05771">https://doi.org/10.1021/acs.analchem.5c05771</a><h6>licensed under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/">CC-BY 4.0</a></h6></blockquote>Selected sections from the article follow. Formats and hyperlinks were adapted from the original.Transthyretin (TTR) is a homotetrameric transport protein that circulates in plasma and cerebrospinal fluid, delivering thyroxine (T4) and retinol-binding protein–vitamin A complexes. <a href="javascript:void(0);">(1)</a> The stability of the TTR tetramer is central to its physiological role because dissociation into monomers can initiate misfolding and amyloid formation, leading to systemic or hereditary transthyretin amyloidosis. <a href="javascript:void(0);">(2)</a> Subunit exchange between wild-type (WT) and variant TTR proteoforms, including disease-associated mutations such as V30M and V122I, have been implicated in amyloid progression by generating hybrid tetramers (tetramers containing WT and mutant subunits) with altered stabilities. <a href="javascript:void(0);">(3,4)</a> Ligand binding, particularly at the two thyroxine-binding sites located at the dimer–dimer interface, can kinetically stabilize the tetramer and modulate amyloidogenicity. <a href="javascript:void(0);">(5,6)</a> Accurate measurement of both subunit exchange kinetics and ligand binding stoichiometry is therefore critical for elucidating the TTR dynamics and stability.Affinity or sequence tags are widely employed in protein expression, purification, or detection. <a href="javascript:void(0);">(7,8)</a> While these tags are often assumed to be inert, their influence on protein structure and dynamics are rarely examined in detail. <a href="javascript:void(0);">(9,10)</a> Protein tags at the N- and C-terminus of TTR have been shown to have differing gas phase stabilities from those of WT-TTR. <a href="javascript:void(0);">(11)</a> The C-terminus is of particular interest because this region participates in the dimer–dimer interface that governs tetramer stability. <a href="javascript:void(0);">(11,12)</a> Characterizing how the C-terminal tag (CT) (-ASGENLFYQ) affects TTR’s solution stability and ligand binding is not only relevant for understanding TTR dynamics but also provides an example of how expression tags can alter protein dynamics. <a href="javascript:void(0);">(13)</a>Native mass spectrometry (nMS) has been invaluable for characterizing protein complexes, <a href="javascript:void(0);">(14)</a> yet conventional nMS often struggles with heterogeneous samples where overlapping charge state distributions and adduct heterogeneity limit resolution and quantitation. <a href="javascript:void(0);">(15)</a> Charge detection mass spectrometry (CDMS) addresses these limitations by independently measuring the charge and m/z of individual ions, enabling the direct determination of molecular mass and abundance. Development of CDMS has largely focused on achieving higher mass resolution <a href="javascript:void(0);">(16)</a> and extending measurements toward assemblies into the GDa range. <a href="javascript:void(0);">(17,18)</a> However, there is untapped utility for CDMS experiments other than mass and proteoform determination. Jordan et al. showed the capability to assess conformational heterogeneity of mAb aggregates using the added charge dimension that CDMS provides. <a href="javascript:void(0);">(19)</a> The current work demonstrates that CDMS can separate proteoforms with overlapping m/z values based on charge and quantify their relative abundances in complex mixtures. While nMS is already a highly quantitative technique, our results establish CDMS as an equally powerful tool for quantitative analysis in heterogeneous systems. <a href="javascript:void(0);">(20,21)</a>Here, we apply Orbitrap-based CDMS/Direct Mass Technology (DMT) using the selective temporal overview of resonant ions (STORI) approach <a href="javascript:void(0);">(22,23)</a> to quantitatively compare WT-TTR and CT-TTR, focusing on two biologically relevant properties: tetramer stability assessed via subunit exchange kinetics and ligand-binding affinity. Conventional nMS cannot fully resolve the overlapping charge states of WT- and CT-TTR or their ligand-bound states. However, DMT can resolve these species by directly measuring the mass (m/z × charge), enabling quantitation of all proteoforms. The data reveal that the CT tag alters tetramer stability and thyroxine-binding affinity, demonstrating the structural sensitivity of TTR to modifications at its C-terminus. More broadly, this work demonstrates the impact that protein tags can have on native protein interactions and highlights the broader utility of quantitative CDMS for probing heterogeneous biological samples.<h4>Experimental Section</h4><h5>Data Collection</h5>All experiments were conducted on a <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/560">Thermo Scientific Q-Exactive UHMR</a> with added DMT capabilities (Bremen, Germany). Before DMT, mass spectra were collected at various resolving powers (6–200k) for each sample, with the instrument parameters reported in the Supporting Information (<a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/suppl/10.1021/acs.analchem.5c05771/suppl_file/ac5c05771_si_001.pdf">Table S1</a>). For DMT experiments, the trapping gas pressure in the HCD cell was reduced to 0.3–0.8 to attenuate the signal intensity to a single ion level, as well as decreasing the UHV pressure to assist ion retention through the entire transient of Orbitrap analysis. We observed no significant difference between mass spectra collected at various HCD cell pressures (Supporting Information, <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/suppl/10.1021/acs.analchem.5c05771/suppl_file/ac5c05771_si_001.pdf">Figure S1</a>). For DMT collection, automated ion control (AIC) and 100% target density were used with 200k resolving power.<h4>Results and Discussion</h4>CDMS has emerged as a powerful tool for analyzing heterogeneous biomolecular samples, enabling accurate, direct mass determination by simultaneously measuring the charge and m/z for individual ions. While CDMS has been widely applied for qualitative analyses, its potential for quantitative and less than MDa applications remains underexplored. <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acs.analchem.5c05771#fig1">Figure 1</a>A shows the theoretical mass spectrum of WT-TTR (14+ to 16+) and CT-TTR (15+ to 17+) homotetramers, where the two proteoforms become increasingly resolved as the charge states increase (&lt;3900 m/z). <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acs.analchem.5c05771#fig1">Figure 1</a>B zooms in on the 14+ (WT) and 15+ (CT) charge states, highlighting their strong overlap, which prevents accurate deconvolution of the proteoforms by conventional methods. <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acs.analchem.5c05771#fig1">Figure 1</a>C displays theoretical distributions for 0, 1, and 2 T4 bound states of both WT- and CT-TTR tetramers, where &lt;3900 m/z has observable separation between all proteoforms. However, for the 14+ and 15+ charge states of WT- and CT-TTR, respectively, the 0 T4- and 1 T4-bound populations overlap (<a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acs.analchem.5c05771#fig1">Figure 1</a>D). Furthermore, commonly adducted species (Na+, K+, and Zn2+) observed in experimental spectra broaden these distributions, making it increasingly difficult to distinguish and deconvolute the proteoforms (see <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/suppl/10.1021/acs.analchem.5c05771/suppl_file/ac5c05771_si_001.pdf">Figure S2</a>). Here, we employ Orbitrap-based CDMS/DMT to overcome this m/z overlap to resolve and quantify hybrid tetramer formation and T4 binding.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Anal_Chem_2025_97_49_27057_27063_Figure_1_A_Theoretical_mass_spectra_of_WT_TTR_and_CT_TTR_homotetramers_47232849d9.jpg" alt="Anal. Chem. 2025, 97, 49, 27057–27063: Figure 1. (A) Theoretical mass spectra of WT-TTR and CT-TTR homotetramers. (B) Zoomed-in view of the 14+ WT-TTR and 15+ CT-TTR distributions to show the large overlap of the proteoforms. (C) Theoretical mass spectra of WT-TTR and CT-TTR homotetramers with thyroxine (T4) binding. (D) Zoomed-in view of the 14+ WT-TTR and 15+ CT-TTR distributions where the 0 and 1 T4 have overlapping distributions. These theoretical distributions do not contain any commonly adducted species (Na+, K+, Zn2+), which broaden the distributions and create more overlap even for the proteoforms in the range 3300–3900 m/z (see Figure S2)." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Anal_Chem_2025_97_49_27057_27063_Figure_1_A_Theoretical_mass_spectra_of_WT_TTR_and_CT_TTR_homotetramers_47232849d9.jpg 187w," sizes="100vw" width="1417" height="1182"><h5>Thyroxine Binding to TTR Homotetramers</h5>Thyroxine is the less active form of a thyroid hormone important for metabolism that binds to TTR for transport throughout plasma and cerebral spinal fluid. <a href="javascript:void(0);">(31)</a> Turnover of T4 into T3 (active) occurs after dissociation, where it can then modulate gene expression via binding to nuclear receptors. <a href="javascript:void(0);">(32)</a> The TTR tetramer gains substantial stability as it binds up to 2 T4 at the tetramer interface, decreasing tetramer dissociation and SUE. <a href="javascript:void(0);">(33)</a> This has been shown previously to decrease the amyloidogenic rate of TTR, which led to tafamidis (similar in structure to T4) to be designed and is currently the only drug that is approved for clinical treatment of TTR amyloidosis. <a href="javascript:void(0);">(34)</a> Measuring the difference in binding affinity between TTR proteoforms may provide insight into regions of TTR or TTR intermolecular/intramolecular interactions that are important for binding of small molecules such as tafamidis and T4.DMT was further applied to quantify T4 binding to WT- and CT-TTR homotetramers, highlighting the technique’s utility in probing protein–ligand interactions. <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acs.analchem.5c05771#fig3">Figure 3</a>A shows a representative mass spectrum of TTR homotetramers in the presence of T4. While ligand-bound species can be observed, homotetramers cannot be confidently resolved across the entire 3000–5000 m/z range. By leveraging the charge-resolving capabilities of DMT, we achieve separation of the homotetramers (<a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acs.analchem.5c05771#fig3">Figure 3</a>B,C) and the 0, 1, and 2 ligand-bound states. The 2D plot clearly shows the gain in resolution achieved when charge is simultaneously measured with m/z by separating the 14+ and 15+ charge states for WT and CT, respectively, in the range 3900–4200 m/z. Additionally, using ion mobility does not provide the same kind of 2D resolution due to the similarity in arrival times for the homotetramer proteoforms, as evidenced by <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/suppl/10.1021/acs.analchem.5c05771/suppl_file/ac5c05771_si_001.pdf">Figures S4 and S5</a> (see the Supporting Information). These data provide evidence that when ion mobility is able to separate out species that overlap in m/z yet differ in mobility, CDMS could be an alternative or used complementarily since the species likely also differ in charge.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Anal_Chem_2025_97_49_27057_27063_Figure_3_A_Mass_spectra_of_WT_TTR_and_CT_TTR_homotetramers_with_thyroxine_binding_61b1e98a94.jpg" alt="Anal. Chem. 2025, 97, 49, 27057–27063: Figure 3. (A) Mass spectra of WT-TTR and CT-TTR homotetramers with thyroxine binding. Ligand binding can be resolved, but homotetramers cannot be confidently identified. Charge states labeled are for WT; CT is always one charge state higher at the same m/z range. (B) DMT heatmap resolving WT-TTR and CT-TTR homotetramers with the additional measurement of charge. (C) Deconvoluted mass spectrum from DMT analysis. Both homotetramers and their ligand binding are resolved, and fit for analysis is shown in red. (D) Mole fraction of each homotetramer and their thyroxine binding species. Error bars represent the standard deviation of replicates (n = 3). The significance for each ligand state is in respect to the left adjacent state. *p &lt; 0.05." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Anal_Chem_2025_97_49_27057_27063_Figure_3_A_Mass_spectra_of_WT_TTR_and_CT_TTR_homotetramers_with_thyroxine_binding_61b1e98a94.jpg 181w," sizes="100vw" width="1266" height="1094"><h4>Conclusion</h4>This work demonstrates that quantitatively, Orbitrap-based CDMS/DMT can determine differences in protein-complex stability and ligand binding. By directly comparing WT- with CT-TTR, we show that the CT tag accelerates tetramer dissociation while enhancing T4 binding affinity. These results indicate that the C-terminus, located at the dimer–dimer interface, plays a more significant role in TTR stability and ligand recognition than previously appreciated. <a href="javascript:void(0);">(12)</a> Even the addition of a short peptide sequence perturbs noncovalent interactions at the interface, likely altering solvent accessibility, and the dynamics of the thyroxine binding channel. <a href="javascript:void(0);">(37,54)</a> Such findings underscore the importance of evaluating how seemingly minor sequence modifications, such as affinity tags, can influence fundamental biophysical properties.Beyond TTR, this work positions quantitative CDMS as a broadly applicable strategy for analyzing heterogeneous protein systems, where charge domain separation overcomes the resolution limits of m/z domain measurements in traditional nMS experiments. While much of the field has emphasized extending CDMS to ultrahigh masses and maximal resolution, <a href="javascript:void(0);">(16,18)</a> our results highlight the underexplored potential of applying the method in the 1000–10,000 m/z range common to nMS experiments. This capability is directly relevant to heterogeneous membrane protein complexes, which often display broad distributions of oligomeric states, PTMs, lipid, and ligand adducts that complicate spectra. <a href="javascript:void(0);">(48,55)</a> Similarly, mAbs can oligomerize and exhibit mass heterogeneity from variable glycosylation, affecting pharmacokinetics, effector function, and stability. <a href="javascript:void(0);">(19)</a> CDMS may resolve and quantify such proteoforms in a single experiment without the need for charge reduction or chemical derivatization. <a href="javascript:void(0);">(48,56,57)</a>

Dissecting Heterogeneous Populations of Protein-Complex Samples Using Direct Mass Technology

Article

Webinars

Video

Scientists

Scientific article

Interview

Science and research

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Organomation, founded in 1959, designs and manufactures high-quality nitrogen evaporators and extraction systems. Known for innovation and durability, their lab instruments are used globally for efficient sample preparation with strong customer support.

Organomation

Watrex Streamline™ UV1 HPLC detector, Stainless Steel

The Streamline™ UV1 HPLC detector offers an excellent signal-to-noise ratio, making it ideal for demanding applications.

Watrex Streamline™ UV1 programmable UV/VIS detector exhibits excellent signal-to-noise ratio for even the most demanding applications. It is equipped with standard analytical cell. It has a 2-lamp source (deuterium + tungsten), variable wavelength detector configuration suitable for operation between 190 and 800 nm.<blockquote>Price 4 788 € ex VAT</blockquote><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Watrex_Streamline_UV_1_UV_VIS_detector_686c6c9937.jpg" alt="Watrex: Streamline™ UV1 detector, Stainless Steel" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Watrex_Watrex_Streamline_UV_1_UV_VIS_detector_686c6c9937.jpg 245w," sizes="100vw" width="945" height="436"><h3>TECHNICAL SPECIFICATION</h3><ul><li>Light Source: Deuterium Lamp, Tungsten Lamp</li><li>Wavelength Range: 190 – 800 nm</li><li>Baseline Noise: 1 x 10-5 AU (@240 nm, 2 sec. risetime)</li><li>Baseline Drift: better than 3 x 10-4 AU/h</li><li>Wavelenghth Reproducibility: ± 0.1 nm</li><li>Linearity: better than 2.5 AU</li><li>Analog Output: 1x 1 V</li></ul>You can also visit this product on the <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/chromatography/detectors/uv-vis-detectors/streamline-uv1-detector/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex website</a>.

Watrex Streamline™ PDA1 HPLC Detector, Stainless Steel

Photo-diode-array (PDA) HPLC detector with the optimum wavelength can be selected for each analyzed substance.

Watrex Streamline™ PDA1 is a photo-diode-array (PDA) detector for routine analysis and sophisticated research.<blockquote>Price 9 972 € ex VAT</blockquote>The dual lamp design offers a wavelength range of 190 – 720 nm (256 Diodes) with a low baseline noise.The front-accessible flow cell can easily bHPLCe exchanged, as can be the lamps which are accessible through a side panel in the instrument housing.Streamline™ PDA1 features 4-Wavelength channels to measure chromatograms at 4 different wavelengths at the same time. With this feature the optimum wavelength can be selected for each analyzed substance.<figure class="image"><img style="aspect-ratio:945/435;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Watrex_Streamline_PDA_1_Photodiode_array_detector_3784ec588b.jpg" alt="Watrex: Streamline™ PDA1 Detector, Stainless Steel" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Watrex_Watrex_Streamline_PDA_1_Photodiode_array_detector_3784ec588b.jpg 245w," sizes="100vw" width="945" height="435"></figure><h3>TECHNICAL SPECIFICATION</h3><ul><li>Wetted Materials: Stainless Steel/ PEEK*, teflon, Glass (*depending on configuration)</li><li>Light Source: Deuterium Lamp, Tungsten Lamp</li><li>Wavelength Range: 190 – 720 nm</li><li>Number of Diodes: 256</li><li>Baseline Noise: ± 1 x 10-5 AU (@240 nm, 1 sec. risetime)</li><li>Baseline Drift: better than 3 x 10-4 AU/h</li><li>Wavelength Accuracy: 0.5 nm</li><li>Mean Pixel Pitch: 2.2 nm</li><li>Resolution: 7 nm</li><li>Linearity: higher than 2.0 AU</li><li>Data Rate: 1 Hz – 100 Hz</li></ul>You can also visit this product on the <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/chromatography/detectors/uv-vis-detectors/streamline-pda1-detector-256-diodes/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex website</a>.

Watrex Streamline RI1 Refractive index HPLC detector

The Watrex Streamline RI1 Refractive Index Detector is an essential component in high-performance liquid chromatography (HPLC) systems.

Streamline™ RI1 refractive index detector is suitable for detecting compounds with little or no UV activity such as alcohols, sugars, lipids or polymers. This instrument is designed for use in analytical HPLC (high performance liquid chromatography) as well as for GPC (gel permeation chromatography) applications.<h3>FEATURES</h3><ul><li>Advanced temperature control for high sensitivity and reproducibility</li><li>Prime purge valve</li><li>Long-life LED light source</li><li>Pressure resistant flow cell</li></ul><h3>TECHNICAL SPECIFICATION</h3><ul><li>Light Source: Long-life LED</li><li>Refractive index Range: 1.00 - 1.75 RIU</li><li>Baseline Noise: ± 2.5 nRIU</li><li>Baseline Drift: 200 nRIU/h</li><li>Linearity: &gt; 1000 μRIU</li><li>Flow cell pressure resistance: 5 bar</li><li>Flow cell volume: 15 μl</li><li>Time constant: 0.00/0.01/0.02/0.05/0.1/0.2/0.5/1.0/2.0/5.0/10.0 s</li><li>Analog Output: 1x 0-2.5V</li><li>Outputs: Event 1, Start (OUT), Error (OUT), + 5 V, 24 V Valve</li></ul><h3>Ordering information:</h3><h5>PN/Component:</h5><ul><li>SRI101-001 Watrex Streamline™ RI refractive index detector (Price 7 018 € ex VAT)</li></ul>You can also visit this product on the <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/chromatography/detectors/other-hplc-detectors/streamline-ri1-detector/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex website</a>.

Watrex Streamline VD1 Viscosimetric HPLC detector

 Watrex Streamline™ VD1 viscosimetric detector is designed for detailed characterization of polymer compounds in both aqueous and organic solvents.

Streamline™ VD1 viscosimetric detector measures absolute intrinsic viscosity and is ideal as a detector for online monitoring in any GPC system. VD1 enables measurement of absolute molecular size using Wheatstone bridge operating principle.<h3>FEATURES</h3><ul><li>High sensitivity and stability</li><li>Low-noise</li><li>Open protocol digital data format</li><li>Direct dual analog output</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Watrex_Streamline_VD_1_Viscosimetric_detector_Universal_calibration_from_VD_1_data_1_149c741933.jpg" alt="Watrex: Watrex Streamline VD1 Viscosimetric detector - Universal calibration from VD1 data 1"><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Watrex_Streamline_VD_1_Viscosimetric_detector_Universal_calibration_from_VD_1_data_2_a616c498e8.jpg" alt="Watrex: Watrex Streamline VD1 Viscosimetric detector - Universal calibration from VD1 data 2"><h3>TECHNICAL SPECIFICATION</h3><ul><li>Wavelength Range: 190 – 720 nm</li><li>Baseline Noise: ± 1 x 10-5 AU (@240 nm, 2 sec. risetime)</li><li>Baseline Drift: &lt; 3 x 10-4 AU/h</li><li>Wavelength Accuracy: ± 0.5 nm</li><li>Wavelenghth Reproducibility: ± 0.1 nm</li><li>Mean Pixel Pitch: 2.2 nm</li><li>Resolution (λ FWHM): 7 nm</li><li>Linearity: &gt; 2.5 AU</li><li>Wavelength Program: Programmable, 10 steps</li><li>Analog Output (optional): 1x 1 V</li><li>Options: Dual channel configuration, thermostated flow cell</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Watrex_Streamline_VD_1_Viscosimetric_detector_Technical_specification_76756715f6.jpg" alt="Watrex: Watrex Streamline VD1 Viscosimetric detector - Technical specification"><h3>Ordering information:</h3><h5>PN/Component:</h5><ul><li>SVD101-001 Watrex Streamline™ VD1 viscosimetric detector (Price 19 741 € ex VAT)</li></ul>You can also visit this product on the <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/chromatography/detectors/other-hplc-detectors/streamline-vd1-detector/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex website</a>.

Watrex Streamline CT1/CT1i HPLC Column thermostat

Watrex Streamline™ CT1i column thermostat is an ideal tool for maintaining stable separation temperatures.

Watrex Streamline CT1/CT1i column thermostat is an ideal tool to grant stable separation temperature even if laboratory temperature fluctuates during the day. It is also essential instrument in sugar analysis and/or many applications requiring higher column temperature. An optional built-in manual syringe front loaded sample injector increases usage comfort.<h3>FEATURES</h3><ul><li>Excellent temperature stability</li><li>Heating up to 100°C</li><li>Thermal fuse against overheating</li><li>Up to 3 columns with length of 250 mm can be placed in the thermostat</li><li>Color touch panel control</li><li>Possibility of installing manual injection valve</li></ul><h3>TECHNICAL SPECIFICATION</h3><ul><li>Temperature range: 10 °C above ambient temperature to 100 °C</li><li>Temperature accuracy: max. 0,5 % of actual temperature</li><li>Temperature stability: RSD &lt; 0,4 %</li><li>Settability: 0,1 °C</li><li>Internal dimensions: 320 x 50 x 30 mm (L x W x H)</li><li>Compartment material: PTFE coated metal</li><li>Compartment connection: USB</li><li>Control: build-in color touch panel, datasystem</li></ul><h3>Ordering information:</h3><h5>PN/Component:</h5><ul><li>ST101-001 Streamline CT1 Columm Thermostat (Price 1 720 € ex VAT)</li><li>ST101-002 Streamline CT1i Columm Thermostat with manual injector</li></ul>You can also visit this product on the <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/chromatography/column-thermostats/streamline-ct1-columm-thermostat/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex website</a>.

Watrex Streamline GPC system

GPC system is an isocratic HPLC system consisting of one P1 pump, CT1i column thermostat with manual injector and RI1 refractive index detector.

GPC system is an isocratic HPLC system consisting of one P1 pump, CT1i column thermostat with manual injector and RI1 refractive index detector.<h3>FEATURES</h3><ul><li>Optimized pump mechanics of P1 pump with parallel piston design offers excellent flow rate accuracy and low RI signal pulsation.</li><li>The thermal isolated optic with a counter-current heat exchanger and programmable temperature control, results in an extremly stable baseline and an optimal Signal/Noise ratio od RI1.</li><li>The system can be upgraded with autosampler and fraction collector, or VD 400 Viscometer Detector.</li><li>Data acquisition, processing and instrument control is done by Clarity Chromatography Station with GPC option or Agilent TriSEC software.</li></ul><h3>TECHNICAL SPECIFICATION</h3><ul><li><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/?s=streamline+p1+pump&amp;post_type=product&amp;dgwt_wcas=1?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">P1 HPLC pump: Flow Rates</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/chromatography/detectors/other-hplc-detectors/streamline-ri1-detector/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">RI1 refractive index detector</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/chromatography/column-thermostats/streamline-ct1-columm-thermostat/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">CT1 Column thermostat</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/999">Clarity™ Chromatography Station</a></li></ul><h5>COMPONENT SPECIFICATION - P1 HPLC pump: Flow Rates</h5><ul><li>Flow Rates: 0.001 to 10.000 mL/min</li><li>Pressure: 0 to 6,000 psi (42 MPa)</li><li>Flow precision: &gt; 0.2% RSD</li><li>Flow accuracy: ± 1 % @ 1mL/min and 7 MPa,</li><li>Pressure accuracy: ± 2% of full-scale, with 80:20 H2O/IPA @ 7 MPa</li><li>Pulsation: ± 0.5 % @ 1mL/min and 7 MPa</li><li>Remote inputs: USB</li></ul><h5>COMPONENT SPECIFICATION - RI1 refractive index detector</h5><ul><li>Light Source: Long-life LED</li><li>Refractive index Range: 1.00 - 1.75 RIU</li><li>Baseline Noise: ± 2.5 nRIU</li><li>Baseline Drift: 200 nRIU/h</li><li>Linearity: &gt; 1000 μRIU</li><li>Flow cell pressure resistance: 5 bar</li><li>Flow cell volume: 15 μl</li><li>Time constant: 0.00/0.01/0.02/0.05/0.1/0.2/0.5/1.0/2.0/5.0/10.0 s</li><li>Analog Output: 1x 0-2.5V</li><li>Outputs: Event 1, Start (OUT), Error (OUT), + 5 V, 24 V Valve</li></ul><h5>COMPONENT SPECIFICATIONS - CT1 Column thermostat</h5><ul><li>Temperature range: 10 °C above ambient temperature to 100 °C</li><li>Temperature accuracy: max. 0,5 % of actual temperature</li><li>Temperature stability: RSD &lt; 0,4 %</li><li>Settability: 0,1 °C</li><li>Internal dimensions: 320 x 50 x 30 mm (L x W x H)</li><li>Compartment material: PTFE coated metal</li><li>Compartment connection: USB</li><li>Control: build-in color touch panel, datasystem</li></ul><h5>COMPONENT SPECIFICATIONS - <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/999">Clarity™ Chromatography Station:</a></h5>Advanced chromatographic datastation for data acquisition and evaluation supported with <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1004">GPC module for MWD, Mw, Mn, Mz calculation</a>. Enables rutine separations with pre-set methods, containing all experimental and conditions and data evaluation settings. PC Win 10 Professional with LCD monitor included.<h3>Ordering information:</h3><h5>PN/Component:</h5><ul><li>SGPC01-001 Streamline™ manual GPC system with Refractive index detector (Includes P1 pump, RI1 detector, CT1i column thermostat with manual injector, solvent rack, Clarity PC station)</li></ul>Optional configurations:<ul><li>ST99-002 Remove CT1i column thermostat with manual injector from system</li><li>SAS90-001 Add AS1 Autosampler to system</li><li>SFC90-001 Add FC1 Fraction collector to system</li></ul>

Watrex SCS 205 GPC Sample cleanup system

The Watrex Streamline SCS 205 Sample Clean-up System is designed for GPC sample pretreatment.

Sample clean-up is an essential method for many routine chromatography applications. One of the most common cases is analysis of polyaromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs) and pesticides in complex mixtures.The initial step is an isolation of hydrophobic (lipophilic) components from the rest of the sample mixture by gel-permeation chromatography (GPC).In such configuration, triglycerides (700-900Da) can be isolated from low molecular (200-300Da) PAHs, PCBs or pesticides using GPC steric exclusion. SCS 205 is a dedicated system for GPC sample pretreatment. SCS 205 includes an isocratic pump double piston pump, manual injector with preparative sample loop, PAH/PCB preparative column (200mg sample loading capacity), fraction collector and start-up kit. .The entire system is controlled from a TFT touch display through intuitive screens.After injection and GPC separation, the purified sample (PAHs, PCBs etc.) is captured by an automated fraction collection usinga3-way motorized switching valve. The timing of the collection is predetermined from the elution profile of the pollutants.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Watrex_SCS_205_Sample_cleanup_system_column_7dce4f25e0.jpg" alt="Watrex: Watrex SCS 205 Sample cleanup system - column"><h3>FEATURES</h3><ul><li>High performance pollutant izolation from complex matrices</li><li>Eluent flexibility</li><li>Easy programmable</li><li>Easy installation &amp; Simple operation</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Watrex_SCS_205_Sample_cleanup_system_schema_ad45276ad0.jpg" alt="Watrex: Watrex SCS 205 Sample cleanup system - schema"><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Watrex_SCS_205_Sample_cleanup_system_graph_10ce455cc3.jpg" alt="Watrex: Watrex SCS 205 Sample cleanup system - graph"><h3>TECHNICAL SPECIFICATION</h3><ul><li>Sampling System: manual valve</li><li>Sample volume: 2 mL loop</li><li>Fraction collection: 50mL flask</li><li>Collection time programming: alternating valve switching to waste/collect/waste</li><li>Display: 4-character</li></ul><h3>Ordering information:</h3><h5>PN/Component:</h5><ul><li>SCS205-001 SCS 205 Sample Clean-up System (Price 8 627 € ex VAT)</li><li>WI02077 WATREX 250x16 mm PAH Prep column, 10 um</li><li>DGD.3008 WATREX 300x8 mm DeltaGel Mixed-D column, 5 um</li><li>DGB.25020 WATREX 250x20 mm DeltaGel Mixed-B column, 5 um</li></ul>You can also visit this product on the <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/chromatography/dedicated-instruments/scs-205-sample-clean-up-system/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex website</a>.

Watrex xTrovert XT Automatic DNA/RNA extractor

Watrex xTrovert XT is an automatic DNA/RNA extractor. It streamlines the extraction process, making it more efficient and reproducible.

Automatic extractor utilises a simple principle of two pipetting heads serving a 96-well plate.Thanks to easy replacement head options of pipetting with 300 μl tips or 1000 μl tips are available. Automatic optical sensor calibration enables the use of pipetting tips and 96-well plates from virtually any supplier. The device is equipped with two magnetic arms for protocols including paramagnetic SPR beads. It also allows for thermal incubation in the range of 25 to 85 °C. In addition to internal LED lighting, the station is equipped with an integrated UV-C sterilisation unit. Intuitive control from TFT touch panel user interface facilitates easy set-up. xTrovert™ XT is a fully programmable open system where user can create their own workflow scripts downloadable as text files from USB flas disk.<h3>APPLICATIONS</h3><ul><li>Sample prep for PCR testing</li><li>NGS library prep</li><li>Sanger DNA sequencing</li></ul><h3>CURRENT PROTOCOLS</h3><ul><li>DNA/RNA extraction</li><li>DNA purification</li><li>PCR clean-up/desalting</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Watrex_x_Trovert_XT_Automatic_DNA_RNA_extractor_Compatible_with_any_magnetic_bead_based_kit_23886eea52.jpg" alt="Watrex: Watrex xTrovert XT Automatic DNA/RNA extractor - Compatible with any magnetic bead based kit"><h3>TECHNICAL SPECIFICATION</h3><ul><li>Capacity: 16 or 32 samples/run</li><li>Volume range: 10 – 600 μl</li><li>Temperature: 25 – 85 °C</li><li>Sterilization: UV-C</li><li>Display: 3,5“ TFT touch display</li><li>Connectivity: USB 1.0/2.0</li><li>Power source: 24 V adaptor</li><li>Dimensions in cm: 65(w) x 65(h) x 34(d)</li><li>Weight: 25 kg</li></ul><h3>Ordering information:</h3><h5>PN/Component:</h5><ul><li>XTR000-001 xTrovert™ XT Universal robotic pipettor for DNA/RNA extraction &amp; handling</li><li>XTR000-003 Replaceable 8-channel 1000uL pipetting head for xTrovert™ XT</li><li>XTR000-004 Replaceable 8-channel 300uL pipetting head for xTrovert™ XT</li><li>XTR000-100 Deepwell plates (empty) for xTrovert™ XT</li><li>XTR000-220 DNA/RNA extraction kit, mgn. beads, 16-rxns per plate</li></ul>The entire system was designed and developed by Watrex Praha and is manufactured in the Czech Republic and promises a shift in the performance and efficiency of laboratory processes worldwide!You can also visit this product on the <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/laboratory-automation/xtrovert-xt/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex website</a>.

Watrex SPR-200 Solvent saver

Watrex SPR-200 Solvent Recycler is designed to save up to 90% of mobile phase during isocratic HPLC.

This Solvent Recycler saves up to 90% of mobile phase by redirection of the pure solvent to the solvent reservoir during the isocratic HPLC. The stand alone device is powered by 5 V DC from power adapter or from computer USB port. Working parameters (Threshold and Delay) are easily set on the display using a membrane keyboard.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Watrex_SPR_200_Solvent_saver_I_Nputs_694d991f2c.jpg" alt="Watrex: Watrex SPR-200 Solvent saver - INputs">The SPR-220™ Solvent Recycler continuously monitors the output signal of the chromatography detector and displays its current value on the built-in display. A highresolution analog-to-digital converter provides data for further evaluation in the built-in processor. If the input signal level exceeds a preset value (Threshold), the SPR-200 will redirect the flow to the waste.When the signal drops, the solvent recycler waits for the transport delay and then switches the mobile phase back to the reservoir. An autosampler injection marker connected to the SPR-200 ZERO input can be used to zero the input signal at the time of injection.<h3>FEATURES</h3><ul><li>Stand alone operation</li><li>Detachable valve</li><li>Possibility of manual Waste/Recycle switching</li></ul><h3>TECHNICAL SPECIFICATION</h3><ul><li>Detector compatibility: compatible with any HPLC detector</li><li>Connection: 1/16″ O.D. tubing, 1/4″-28 flat bottom fittings</li><li>Maximum pressure: 30 p.s.i./0,2 MPa</li><li>Wetted material: PEEK, PTFE</li><li>Input range: +/- 1 V or +/- 100 mV, user selectable</li><li>Computer connection: μUSB</li><li>TTL/contact closure input: configurable (ZERO, start, valve position)</li><li>Power: 5V DC/&lt;100 mA (power supply or computer USB port)</li><li>User interface: large character LCD alphanumeric display + membrane keypad</li></ul><h3>Ordering information:</h3><h5>PN/Component:</h5><ul><li>SPR200-001 SPR-200 Solvent Recycler, PEEK version (Price 1 250 € ex VAT)</li><li>SPR200-002 SPR-200 Solvent Recycler, PTFE version (Price 1 250 € ex VAT)</li></ul>You can also visit this product on the <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/?s=SPR-200+Solvent&amp;post_type=product&amp;dgwt_wcas=1?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex website</a>.

Watrex SCI-AQUA ROWAPUR BASIC Water Purification System

Fully automatic system for the preparation of pure water based on reverse osmosis. Reverse osmosis membrane is protected by three-stage pre-filtration consisting of sediment filter and two carbon adsorption filters.

Fully automatic system for the preparation of pure water based on reverse osmosis. Reverse osmosis membrane is protected by three-stage pre-filtration consisting of sediment filter and two carbon adsorption filters.<a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/water-purification/reverse-osmosis-systems/sci-aqua-basic/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex SCI-AQUA BASIC</a> is driven by water pressure from water distribution network, it does not require electric power. It prepares water free of mechanical impurities, chlorine, 95-99% of all dissolved substances are removed.&nbsp;Depending on input water composition and supply pressure the output water has a specific conductivity in the range of 10-20 µS/cm.Price: <bdi>384&nbsp;€</bdi> ex. VAT<h4>Features</h4><ul><li>Removes 95 – 99% of dissolved substances</li><li>Typical specific conductivity of produced water 10 – 20 µS/cm</li><li>6 to 12 months filters lifetime</li><li>2 – 5 years RO membrane lifetime</li><li>No electricity is required for operation</li><li>Supplied from water distribution network</li></ul><h4>Technical specification</h4><ul><li>Daily production capacity: 50 – 70 liters</li><li>Input water pressure: 0,3 – 0,7 MPa</li><li>Input water temperature: &lt; 35 °C</li><li>Maximum input water TDS: 1200 mg/l</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Water_purification_systems_8810a2c48a.jpg" alt="Watrex: Water purification systems" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Watrex_Water_purification_systems_8810a2c48a.jpg 245w," sizes="100vw" width="2286" height="1130">Basic requirements for laboratory operations include the easy availability of pure laboratory water in the necessary quantity and quality. Distillation, a popular technique for producing purified water in the past, has virtually completely supplanted by less energy-intensive and operationally dependable alternatives today. Reverse osmosis is the foundation of the majority of contemporary systems for producing purified water; in reality, this principle is supplemented with adsorption, ion exchange, filtration, ultrafiltration, and other physical-chemical techniques.

Products distributed by WATREX Prague - page 6

Related content

Dissecting Heterogeneous Populations of Protein-Complex Samples Using Direct Mass Technology

Webinars LabRulezLCMS Week 07/2026

Affinity, Gel Filtration, Size Exclusion Chromatography: Repurposing Kinase Inhibitors for Malaria