At MSACL 2025, a Thermo Fisher Scientific–sponsored workshop led by Qin Fu addressed one of the most persistent challenges in proteomics: how to efficiently and reproducibly translate biomarker discoveries into clinically meaningful assays. Drawing on experience spanning academia and industry—including prior work in Jennifer Van Eyk’s lab—Fu shared practical insights into building a scalable, end-to-end biomarker discovery-to-validation pipeline.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Fisher_Scientific_Accelerating_Biomarker_Discovery_and_Validation_From_Discovery_to_Clinical_Utility_9558364cf2.jpg" alt="Thermo Fisher Scientific: Accelerating Biomarker Discovery and Validation: From Discovery to Clinical Utility" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Fisher_Scientific_Accelerating_Biomarker_Discovery_and_Validation_From_Discovery_to_Clinical_Utility_9558364cf2.jpg 245w," sizes="100vw" width="1024" height="512">The session highlighted how emerging mass spectrometry technologies, automation, and informatics are reshaping biomarker research—reducing complexity, improving reproducibility, and accelerating the path to clinical utility.<h3>The three tiers of biomarker assays</h3>The workshop opened with a review of the widely accepted three-tier framework that guides biomarker development from early discovery through clinical validation:<h4>Tier 3 – discovery</h4>Exploratory, untargeted workflows such as data-dependent acquisition (DDA) and data-independent acquisition (DIA). These approaches prioritize breadth, enabling the identification of large-magnitude biological changes across hundreds to thousands of analytes, typically with low-to-moderate precision and without internal standards.<h4>Tier 2 – verification</h4>Research-grade targeted assays, including parallel reaction monitoring (PRM) and multiple reaction monitoring (MRM). These methods focus on tens to hundreds of analytes, delivering improved precision and repeatability to confirm trends observed during discovery.<h4>Tier 1 – validation</h4>Clinically validated assays designed to meet rigorous quality and regulatory standards. These workflows incorporate internal standards and strict quality controls to ensure quantitative reproducibility suitable for clinical and translational use.Each tier represents a critical step toward ensuring that biomarker candidates can ultimately deliver reliable patient benefit.<h3>The central challenge: from sample to signal</h3>Reliable biomarker development depends on consistency across the entire analytical workflow—from biological sample preparation to mass spectrometry data acquisition and downstream analysis. Every step introduces potential sources of variability, and minimizing this analytical noise while preserving biological signal is essential.Automation emerged as a central theme of the workshop. Beyond improving throughput, automation fundamentally enhances reproducibility. Robotic sample preparation reduces variability associated with digestion, pipetting, and handling—enabling consistent performance across hundreds or thousands of samples, a scale that is difficult to achieve manually.<h3>Technological innovation powering a paradigm shift</h3>Recent advances in mass spectrometry are enabling researchers to bridge the gap between discovery and validation more efficiently than ever before. The workshop highlighted several Thermo Fisher Scientific platforms driving this shift:<ul><li>Thermo Scientific Orbitrap Astral mass spectrometer Optimized for discovery workflows, the Astral system delivers rapid acquisition and deep proteome coverage while maintaining high precision across large cohorts.</li><li>Thermo Scientific Stellar platform Designed for high-throughput targeted quantification, the Stellar platform supports scalable PRM workflows. Features such as PRM Conductor enable adaptive retention time tracking, which is essential for robust performance in large studies.</li><li>Thermo Scientific OptaSpray Ion Source (under evaluation) A hands-free ionization source designed to deliver consistent spray performance with simplified maintenance, supporting reproducibility across thousands of injections.</li></ul>Together, these technologies create a smoother continuum across assay tiers, shortening timelines and reducing barriers to clinical translation.<h3>Case study: Inflammatory bowel disease (IBD) cohort</h3>A key highlight of the presentation was a large-scale biomarker study in inflammatory bowel disease (IBD). The team conducted a 500-sample discovery analysis, followed by validation in a 1,000-sample cohort. Discovery was performed using the Orbitrap Astral system, while targeted validation employed the Stellar platform.This integrated approach successfully confirmed established biomarkers such as C-reactive protein (CRP) while also identifying novel protein candidates with strong translational potential. Importantly, these markers demonstrated consistency across discovery and validation data sets—underscoring the power of advanced instrumentation combined with robust workflows and informatics.<h3>From high quantity to high quality</h3>Historically, biomarker discovery has involved a tradeoff between throughput and data quality. The workshop demonstrated that this compromise is no longer necessary. By integrating automated sample preparation, optimized informatics, and next-generation mass spectrometry, researchers can now generate high-quality, high-throughput data that is both scalable and reproducible.This shift enables faster discovery while increasing confidence that candidate biomarkers are ready for downstream validation and clinical follow-up.<h3>The future of biomarker translation</h3>The workshop concluded on an optimistic note. Innovations in proteomics are fundamentally transforming biomarker development—shortening timelines, reducing costs, and accelerating the transition from discovery to clinical application.By integrating platforms such as Orbitrap Astral, Stellar, and OptaSpray, Thermo Fisher Scientific is helping advance a new era of translational biomarker science—where precision, scalability, and reliability work together to deliver meaningful clinical impact.Watch the full workshop recording to <a target="_blank" rel="noopener noreferrer" href="https://www.youtube.com/watch?v=ziyffQzZTwk">explore the data, workflows, and results behind this end-to-end approach to biomarker discovery and validation.</a><h3>Intended use disclaimer</h3>General Laboratory Equipment – Not For Diagnostic Procedures. Thermo Scientific general laboratory equipment, consumables, and software are intended for research, academic, and industrial use only. These products are not designed, validated, or approved for in vitro diagnostic or clinical use. Use of these products for diagnostic purposes may result in inaccurate results and potential health and safety risks.<h3>Resources</h3>Workshop &amp; educational content<ul><li>MSACL 2025 workshop recording: <a target="_blank" rel="noopener noreferrer" href="https://www.youtube.com/watch?v=ziyffQzZTwk">Accelerating Biomarker Discovery and Validation</a></li><li>Other MSACL workshop recordings coming soon</li></ul>Thermo Fisher Scientific Product Pages<ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/2207">Thermo Scientific TSQ Certis Mass Spectrometer</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/836">Thermo Scientific Orbitrap Astral Mass Spectrometer</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1149">Thermo Scientific Stellar Mass Spectrometer</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/order/catalog/product/B51004132">Thermo Scientific OptaSpray Ion Source</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/content/lifetech/global/en/home/industrial/mass-spectrometry/mass-spectrometer-price-affordability-programs.html">Mass spectrometer affordability programs</a> (Refurbished MS, trade-in, financing/ leasing)</li></ul>Peer-Reviewed Literature<ul><li>Baker ES et al. <a target="_blank" rel="noopener noreferrer" href="https://europepmc.org/article/MED/22943415">Mass spectrometry for translational proteomics: progress and clinical implications.</a> Genome Medicine (2012).</li><li>Fu Q et al. <a target="_blank" rel="noopener noreferrer" href="https://academic.oup.com/clinchem/article/62/1/198/5611803">An Empirical Approach to Signature Peptide Choice for Selected Reaction Monitoring.</a> Clinical Chemistry (2016).</li><li>Fu Q et al. <a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1002/mas.21750">Automated proteomic sample preparation: The key component for high throughput and quantitative mass spectrometry analysis.</a> Mass Spectrometry Reviews (2023).</li><li>Fu Q et al. <a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1021/acs.jproteome.7b00623">Highly Reproducible Automated Proteomics Sample Preparation Workflow for Quantitative Mass Spectrometry.</a> Journal of Proteome Research (2018).</li><li>Fu Q et al. <a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1002/anie.202409446">A Proteomics Pipeline for Generating Clinical Grade Biomarker Candidates from DIA-MS Discovery.</a> Angewandte Chemie International Edition (2024).</li><li>Fu Q et al. <a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1002/anie.202507610">Development and Clinical Evaluation of a Multiplexed Health Surveillance Panel Using Ultra High-Throughput PRM-MS in an Inflammatory Bowel Disease Cohort.</a> Angewandte Chemie International Edition (2025).</li></ul><blockquote>Visit us on&nbsp;<a target="_blank" rel="noopener noreferrer" href="https://www.linkedin.com/showcase/72003132/admin/dashboard/">LinkedIn:</a>&nbsp;#Omics #BiomarkerDiscovery #MassSpectrometry #ClinicalResearch</blockquote>

Accelerating Biomarker Discovery and Validation: From Discovery to Clinical Utility

Choosing the correct membrane for a syringe filter is an important step in achieving dependable and reproducible analytical results. Whether you work with nylon, PTFE, hydrophilic PTFE, or cellulose acetate filters, the membrane material directly influences filtration efficiency, sample integrity, and overall method performance. In this article, we explore why membrane selection matters, review the characteristics of common membrane materials, and provide practical guidance for choosing the best option for your application.<h4>Why Are Syringe Filters Important?</h4>Syringe filters are routinely used to remove particulate matter from samples prior to analysis. Unfiltered samples can introduce contaminants into chromatographic systems, leading to clogged columns, increased system backpressure, reduced instrument lifetime, and compromised analytical performance.Selecting an appropriate membrane is therefore essential for developing a robust and reliable HPLC workflow. An ideal membrane effectively removes particles while preserving the original composition of the sample. Since the membrane comes into direct contact with both the analyte and the sample solvent, compatibility must always be carefully considered.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_syringe_filters_f3eaa1381e.webp" alt="KNAUER: Syringe filters" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_syringe_filters_f3eaa1381e.webp 156w," sizes="100vw" width="720" height="720">Let’s examine the key factors involved in choosing the most suitable membrane.<h4>Step 1: Consider the Nature of Your Sample</h4>The first and most important factor is the chemical composition of the sample and the solvents involved. Different membrane materials offer different chemical resistance and sample interaction characteristics.<h5>Nylon Membranes</h5>Nylon is one of the most commonly used membrane materials in HPLC laboratories because of its broad compatibility with aqueous solutions and many organic solvents.Recommended applications:<ul><li>Routine filtration of HPLC samples containing aqueous solvents, organic solvents, or mixed mobile phases.</li><li>Removal of suspended particles prior to chromatographic injection.</li><li>General-purpose laboratory filtration where versatility is required.</li></ul>Avoid using Nylon when:<ul><li>Working with strongly acidic solutions or samples with pH values below 3.</li><li>Filtering protein-containing samples, since proteins can adsorb to the membrane surface and reduce recovery.</li></ul><h5>Cellulose Acetate (CA) Membranes</h5>Cellulose acetate membranes exhibit very low protein binding and are widely used for biological and biochemical applications.Recommended applications:<ul><li>Filtration of biological fluids such as serum, plasma, and cell culture media.</li><li>Applications where protein recovery must be maximized.</li><li>Aqueous laboratory procedures involving enzymes or other sensitive biomolecules.</li></ul>Avoid using CA when:<ul><li>Filtering samples containing organic solvents that may damage the membrane.</li><li>Working under highly acidic or highly alkaline conditions that could degrade the material.</li></ul><h5>Hydrophilic PTFE (hPTFE) Membranes</h5>Hydrophilic PTFE combines the exceptional chemical resistance of PTFE with the ability to process aqueous samples without pre-wetting.Recommended applications:<ul><li>Filtration of both aqueous and organic solutions.</li><li>HPLC sample preparation involving mixed solvent systems.</li><li>Applications requiring compatibility across a broad pH range.</li></ul>Avoid using hPTFE when:<ul><li>Processing highly viscous samples that may rapidly clog the membrane.</li><li>Performing PFAS analysis, where fluorinated materials may introduce unwanted contamination.</li></ul><h5>PTFE Membranes</h5>PTFE membranes provide excellent resistance to aggressive chemicals and are especially suitable for demanding solvent environments.Recommended applications:<ul><li>Samples containing strong acids, strong bases, or aggressive organic solvents.</li><li>Environmental, industrial, and chemical analyses involving non-polar solvents such as hexane, toluene, or acetone.</li><li>Filtration of predominantly organic solvent-based samples.</li></ul>Avoid using PTFE when:<ul><li>Filtering aqueous solutions without first wetting the membrane or using a hydrophilic PTFE alternative.</li><li>Working with protein-rich or highly hydrophilic samples where adsorption or poor wetting may occur.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Fig_1_4_Nylon_top_left_CA_top_right_h_PTFE_bottom_left_and_PTFE_bottom_right_86a6481d0b.jpg" alt="KNAUER: Fig. 1–4 Nylon (top left), CA (top, right), hPTFE (bottom, left), and PTFE (bottom, right)" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Fig_1_4_Nylon_top_left_CA_top_right_h_PTFE_bottom_left_and_PTFE_bottom_right_86a6481d0b.jpg 157w," sizes="100vw" width="1111" height="1107"><h4>Step 2: Select an Appropriate Pore Size</h4>The membrane pore size determines the level of particulate removal and should be selected according to the requirements of the analytical method.Common pore sizes include:<ul><li>0.2 µm – Suitable for removing very fine particles and for sterile filtration. Frequently used in UHPLC and LC-MS workflows.</li><li>0.45 µm – The standard choice for most routine HPLC applications.</li><li>1.0 µm and larger – Often used for coarse filtration or as a pre-filtration step for heavily contaminated samples.</li></ul>Choosing the correct pore size helps protect instrumentation while minimizing unnecessary sample loss.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Fig_1_2_0_22_m_left_and_0_45_m_right_Nylon_Syringe_Filter_48ffc3d777.jpg" alt="KNAUER: Fig. 1–2 0.22 µm (left), and 0.45 µm (right) Nylon Syringe Filter" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Fig_1_2_0_22_m_left_and_0_45_m_right_Nylon_Syringe_Filter_48ffc3d777.jpg 245w," sizes="100vw" width="1177" height="573"><h4>Step 3: Verify Chemical Compatibility</h4>Before selecting a membrane, confirm that it is compatible with both the sample matrix and the solvents present. Incompatible materials may swell, degrade, release extractables, or alter the composition of the sample.Consulting a solvent compatibility chart is highly recommended whenever unfamiliar solvents or mixtures are involved.<h4>Step 4: Match the Membrane to the Application</h4>Different analytical applications often benefit from specific membrane types.<h5>HPLC Analysis</h5><ul><li>Nylon and PTFE membranes are among the most frequently used options due to their broad chemical compatibility and excellent filtration performance.</li></ul><h5>Protein and Biomolecule Analysis</h5><ul><li>CA, PVDF, and PES membranes are generally preferred because they exhibit low protein binding and help preserve sample recovery.</li></ul><h5>Microbiological Testing</h5><ul><li>Mixed cellulose ester (MCE) membranes are commonly employed for microbial monitoring and microbiological quality control procedures.</li></ul>Selecting a membrane tailored to the analytical objective can significantly improve data quality and method reliability.<h4>Step 5: Evaluate Product Quality and Certification</h4>Not all syringe filters are manufactured to the same standards. For critical applications, select products that comply with recognized quality systems and certifications such as ISO standards or CE requirements.This becomes particularly important in regulated industries, where traceability, consistency, and documented performance are essential.<h4>Practical Recommendations for Using Syringe Filters</h4>Following good filtration practices can further improve analytical performance.<ul><li>Pre-Wet Hydrophobic Membranes: Hydrophobic materials such as PTFE often require pre-wetting with a compatible organic solvent before filtering aqueous samples.</li><li>Avoid Excessive Pressure: Applying excessive force may rupture the membrane or cause leakage. Luer-lock syringes are recommended to provide secure connections and controlled pressure.</li><li>Use Filters Only Once: Syringe filters are intended for single-use operation. Reusing filters increases the risk of carryover and cross-contamination.</li><li>Dispose of Filters Properly: Used syringe filters should be discarded according to laboratory safety procedures and local waste disposal regulations.</li></ul><h4>Final Thoughts</h4>Selecting the right syringe filter membrane is a key factor in obtaining accurate, reproducible, and reliable analytical results. By considering sample composition, solvent compatibility, pore size, and application requirements, laboratories can choose filtration solutions that protect instruments, preserve sample integrity, and improve overall analytical performance.A carefully selected membrane may seem like a small detail, but it can have a substantial impact on the quality and robustness of your entire analytical workflow.<blockquote>If you want to optimize your HPLC workflow, check out our brand-new <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/2380">SEPAPURE Syringe Filter</a>.</blockquote>

How to Choose the Right Membrane for Your Syringe Filter

News from LabRulezLCMS Library - Week 26, 2026

Article

Product

Application

Science and research

Video

Poster

A unique company dedicated to serving science helping our customers drive productivity and accelerate results. Through our premier brands – Thermo Scientific, Applied Biosystems, Invitrogen, Fisher Scientific and Unity Lab Services.

Thermo Fisher Scientific

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Based in Berlin, KNAUER is a medium-sized, owner-managed company that has been serving the sciences since 1962. We develop and manufacture scientific instruments of superior quality for liquid chromatography, including: Analytical HPLC/UHPLC, Preparative HPLC, Fast protein liquid chromatography (FPLC), Multi-column chromatography/Simulated moving bed (SMB) chromatography. High pressure dosing, in-line detection systems, and osmometry are additional business areas.

KNAUER

Thermo Scientific QuEChERS Sample Preparation Kits

QuEChERS is a versatile sample preparation method for analyzing pesticides, veterinary drugs, and other residues in various sample types before GC-MS or LC-MS analysis.

<div><div><div><h3>QuEChERS sample preparation—now easier, more convenient, and affordable</h3>QuEChERS (Quick, Easy, Cheap, Effective, Rugged, and Safe)is a sample preparation method that was initially developed in 2003 for analyzing veterinary drugs in food. The method was also tested for pesticide residue analysis in plant material with great success. In 2003, the detailed method was published in the journal AOAC International. Since then, the QuEChERS method has evolved into a sample preparation technique used on a variety of analytes in an expanding number of sample types before analysis by <a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/cz/en/home/industrial/mass-spectrometry/gas-chromatography-mass-spectrometry-gc-ms.html">GC-MS</a> or <a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/cz/en/home/industrial/mass-spectrometry/liquid-chromatography-mass-spectrometry-lc-ms.html">LC-MS</a>.Thermo Scientific QuEChERS kits contain pre-packaged, ready-weighed salts, sorbents, and buffers to streamline your workflow and minimize the potential for error. The kits are grouped according to your analytes of interest, sample matrix, and preferred QuEChERS method:<ul><li>Original 2003 Method</li><li>AOAC 2007.01 Method</li><li>EN 15662 Method</li><li>NY/T 1380-2007 Method</li></ul>Complete packages—including both extraction and clean-up kits—are available. Extraction-only and cleanup-only kits are also offered to suit your laboratory’s sample preparation needs. These pre-packaged kits save time and money, make QuEChERS procedures easier and more convenient, and ensure quality to yield reproducible results and excellent recoveries for a wide variety of analytes.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Qu_E_Ch_ERS_Sample_Preparation_Kits_2_1e99f0c81b.jpg" alt="Thermo Scientific QuEChERS Sample Preparation Kits" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Qu_E_Ch_ERS_Sample_Preparation_Kits_2_1e99f0c81b.jpg 217w," sizes="100vw" width="891" height="640"><h3>Typical QuEChERS workflow</h3><div><div><div><div><div>As shown in the workflow diagram below, the QuEChERS method has four basic steps:<ol><li>Homogenize sample (fruit or vegetable)</li><li>Extract analytes of interest from a sample using extraction salts (pesticide residues, veterinary drugs, and/or mycotoxins)</li><li>Clean-up the resulting supernatant using dispersive solid phase extraction (dSPE)</li><li>Analyze by GC-MS or LC-MS</li></ol><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Qu_E_Ch_ERS_Sample_Preparation_Kits_496491ceff.jpeg" alt="Thermo Scientific QuEChERS Sample Preparation Kits" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Qu_E_Ch_ERS_Sample_Preparation_Kits_496491ceff.jpeg 245w," sizes="100vw" width="1170" height="706"><div><h3>QuEChERS products</h3></div><div><h4>QuEChERS extraction kits for original 2003 method</h4></div><div>The original QuEChERS method (Anastassiades et al, 2003) was developed by Steven J. Lehotay and Michelangelo Anastassiades in 2003 for the determination of pesticide residues in fruits and vegetables. The original method was created to analyze non-base-sensitive compounds and uses a sodium chloride buffer to reduce polar interferences and enhance extraction. Buffering is an important part of the QuEChERS procedure because it allows for analysis of pesticides and other residues that display pH dependence in their recoveries, depending on the sample matrix. Three different extraction kits are available to support the original 2003 QuEChERS method.<h5>Chemicals used in the original 2003 method</h5></div><ul><li>Acetonitrile: Used to perform single-phase extraction (SPE) on a sample</li><li>Anhydrous MgSO₄: Induces phase separation between water content in sample and acetonitrile layer during liquid-liquid partitioning step; removes remaining water from sample during dispersive solid phase extraction (dSPE) step</li><li>NaCl: Induces phase separation between water content in sample and acetonitrile layer during liquid-liquid partitioning step; removes residual water from sample; reduces polar interference and enhances extraction</li><li>PSA: Primary secondary amine, used to remove polar matrix components, citric co-extractives, and free fatty acids, from sample during dispersive solid phase extraction (dSPE) step</li></ul><div><h4>QuEChERS extraction and clean-up kits for AOAC 2007.01 method</h4>The AOAC 2007.01 QuEChERS Method was developed by Steven J. Lehotay and his co-workers, who modified the original 2003 method to accommodate the use of acetate buffering at higher concentration for greater buffering strength. Buffering is an important part of the QuEChERS procedure because it allows for analysis of pesticides and other residues that display pH dependence in their recoveries, depending on the sample matrix. These extraction and clean-up products here support the AOAC 2007.01 method.<div><h5>Chemicals used in the AOAC 2007.01 method</h5><ul><li>Acetonitrile: Used to perform single-phase extraction on a sample</li><li>Anhydrous MgSO₄: Induces phase separation between water content in sample and acetonitrile layer during liquid-liquid partitioning step; removes remaining water from sample during dispersive solid phase extraction (dSPE) step</li><li>NaOAc: Buffers the sample to stabilize pH</li><li>PSA: Primary secondary amine, used to remove polar matrix components, citric co-extractives, and free fatty acids, from sample during dispersive solid phase extraction (dSPE) step</li><li>C18: Removes fats, sterols, and other non-polar interferences from sample</li><li>GCB: Graphitized carbon black, removes pigment (not recommended for use with planar pesticides)</li></ul><div><h4>QuEChERS extraction and clean-up kits for EN 15662 method</h4>The extraction and clean-up products here support the EN 15662 method. Widely used in Europe, the EN 15662 method was developed by Michelangelo Anastassiades and co-workers, who modified the original 2003 method to accommodate the use of citrate buffering at a relatively low buffering capacity. This variation uses a sodium chloride buffer to minimize polar interferences in addition to sodium citrate dihydrate and disodium citrate sesquihydrate buffers. Buffering is an important part of the QuEChERS procedure because it allows for analysis of pesticides and other residues that display pH dependence in their recoveries, depending on the sample matrix.<h5>Chemicals used in the EN 15662 method</h5><ul><li>Acetonitrile: Used to perform single-phase extraction on a sample</li><li>Anhydrous MgSO₄: Induces phase separation between water content in sample and acetonitrile layer during liquid-liquid partitioning step; removes remaining water from sample during dispersive solid phase extraction (dSPE) step</li><li>NaCl: Induces phase separation between water content in sample and acetonitrile layer during liquid-liquid partitioning step; removes residual water from sample</li><li>Trisodium Citrate: Buffers the sample to stabilize pH</li><li>Disodium Citrate Sesquihydrate: Buffers the sample to stabilize pH</li><li>PSA: Primary secondary amine, used to remove polar matrix components, citric co-extractives, and free fatty acids, from sample during dispersive solid phase extraction (dSPE) step</li><li>C18: Removes fats, sterols, and other non-polar interferences from sample</li><li>GCB: Graphitized carbon black, removes pigment (not recommended for use with planar pesticides)</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Qu_E_Ch_ERS_Sample_Preparation_Kits_3_721562526f.jpg" alt="Thermo Scientific QuEChERS Sample Preparation Kits" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Qu_E_Ch_ERS_Sample_Preparation_Kits_3_721562526f.jpg 245w," sizes="100vw" width="1471" height="488"><div><h4>QuEChERS clean-up kit for NY/T 1380-2007 method</h4></div><div>The NY/T 1380-2007 method is recommended by China Ministry of Agriculture for the QuEChERS Method sample preparation of 51 specific pesticide residues in fruits and vegetables with analysis by GC-MS.<h5>Chemicals used in the NY/T 1380-2007 method</h5><ul><li>Anhydrous MgSO₄: Induces phase separation between water content in sample and acetonitrile layer during liquid-liquid partitioning step; removes remaining water from sample during dispersive solid phase extraction (dSPE) step</li><li>PSA: Primary secondary amine, used to remove polar matrix components, citric co-extractives, and free fatty acids, from sample during dSPE step</li><li>C18: Removes fats, sterols, and other non-polar interferences from sample</li></ul></div></div></div></div></div></div></div></div></div></div></div></div>

Thermo Scientific Hypersil GOLD C18 Selectivity HPLC Columns

Achieve exceptional peak shape and resolution for your HPLC and LC/MS applications with Thermo Scientific™ Hypersil GOLD™ HPLC columns. 

Achieve exceptional peak shape and resolution for your HPLC and LC/MS applications with Thermo Scientific™ Hypersil GOLD™ HPLC columns. These endcapped, ultrapure, silica-based columns deliver significant reduction in peak tailing using generic gradients with C18 selectivity. With their excellent resolution, efficiency, and sensitivity, Hypersil GOLD columns give you confidence in the accuracy and quality of your analytical data.<h5>Novel Bonding</h5><ul><li>Proprietary derivatization and endcapping</li><li>C18 (USP L1) selectivity</li></ul><h5>pH Stability</h5><ul><li>Robust performance at high pH</li><li>Excellent column stability at low pH</li></ul><h5>Flexible Formats</h5><ul><li>Javelin HTS columns for high-throughput screening</li><li>Semi-preparative columns with 12 μm particles available</li></ul><h4>About the Hypersil GOLD Family of HPLC Columns</h4>Meet the challenges of modern chromatography with state-of-the-art columns that provide outstanding performance and consistent separations. Twelve different column chemistries are available so you can optimize separations and maximize productivity. Get outstanding peak shapes in reversed phase, ion exchange, HILIC, or normal phase chromatography.<ul><li>Excellent peak symmetry</li><li>Narrow peaks for outstanding efficiency</li><li>Enhanced sensitivity and improved resolution</li><li>Exceptional reproducibility for reliable chromatography, column after column</li><li>Solutions for high-throughput screening</li><li>1.9, 3, and 5 μm particle sizes for all your separation needs</li></ul><h4>Specifications</h4><ul><li>Endcapped: Yes</li><li>For Use With: LC/MS</li><li>Max. Pressure: 5800 psi (400 bar)</li><li>Packing Material: Spherical, Fully Porous, Ultrapure Silica</li><li>Stationary Phase: C18 Selectivity</li><li>Surface Area: 220 m²/g</li><li>Temperature: 60°C</li><li>USP Type: L1</li><li>Carbon Load: 11%</li><li>Phase: Reversed Phase</li><li>Pore Size: 175 Å</li><li>pH: 1 to 11</li></ul>

Thermo Scientific Accucore Biphenyl Reversed Phase HPLC Columns

Choose Thermo Scientific™ Accucore™ Biphenyl LC Columns for fast and reliable separation of critical pairs and isomers.

Choose Thermo Scientific™ Accucore™ Biphenyl LC Columns for fast and reliable separation of critical pairs and isomers. These columns provide unique selectivity for aromatic and moderately polar analytes. Their optimized packing offers a rugged platform for a variety of matrices. Based on Core Enhanced Technology, Accucore liquid chromatography reversed phase columns provide fast, high-resolution separations without the elevated backpressures seen using sub-2μm particles.<ul><li>Fast separations with excellent resolution and sensitivity</li><li>Lower backpressures so that UHPLC is not required</li><li>Mixed-mode selectivity for aromatic and moderately polar analytes</li><li>Enhanced Pi-pi interactions with aromatics</li><li>Excellent lot-to-lot reproducibility</li></ul>Trust your separation of critical pairs and isomers to Accucore Biphenyl LC Columns. These columns offer fast run times, excellent robustness, and consistent reproducibility, and provide the perfect balance of polar analyte retention and hydrophobic analyte elution.<h4>Specifications</h4><ul><li>Endcapped: Yes</li><li>For Use With: HPLC/UHPLC</li><li>Max. Pressure: 8700 psi (600 bar)</li><li>Packing Material: Spherical, Solid Core, Ultrapure Silica</li><li>Particle Shape: Spherical Solid Core</li><li>Stationary Phase: Biphenyl</li><li>Surface Area: 130 m²/g</li><li>Temperature: 70°C</li><li>USP Type: L11</li><li>Carbon Load: 6%</li><li>Phase: Reversed Phase</li><li>Pore Size: 80 Å</li><li>pH: 2 to 8</li></ul>

Thermo Scientific Accucore Vanquish C18+ UHPLC Columns

Choose Thermo Scientific™ Accucore™ Vanquish™ C18+ UHPLC columns, containing uniquely efficient 1.5 μm solid core particles for use with the Thermo Scientific™ Vanquish™ UHPLC system

Choose Thermo Scientific™ Accucore™ Vanquish™ C18+ UHPLC columns, containing uniquely efficient 1.5 μm solid core particles for use with the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products?category=40&amp;manufacturerItems=3">Thermo Scientific™ Vanquish™ UHPLC system</a>. Founded on state-of-the-art Core Enhanced Technology™, this sub-2 μm particle next-generation column has ultra-short diffusion paths that result in extremely efficient separations. This high efficiency enables fast separation and the resolution of complex mixtures. In concert with Vanquish systems, these columns deliver more results with better separations, thereby enhancing workflows and productivity.<h4>Specifications</h4><ul><li>Endcapped: Yes</li><li>For Use With: UHPLC</li><li>Max. Pressure: 21756 psi (1500 bar)</li><li>Packing Material: Spherical, Solid Core, Ultrapure Silica</li><li>Particle Shape: Spherical Solid Core</li><li>Stationary Phase: C18</li><li>Surface Area: 110 m²/g</li><li>Temperature: 70°C</li><li>USP Type: L1</li><li>Carbon Load: 6.5%</li><li>Phase: Reversed Phase</li><li>Pore Size: 80 Å</li><li>pH: 2 to 9</li></ul>

Thermo Scientific Accucore RP-MS HPLC Columns

Optimized for MS detection, Thermo Scientific™ Accucore™ RP-MS LC Columns are an excellent combination of speed and quality of separation.

Optimized for MS detection, Thermo Scientific™ Accucore™ RP-MS LC Columns are an excellent combination of speed and quality of separation.Based on Core Enhanced Technology, Accucore columns provide fast, high-resolution separations—without the elevated backpressures required by sub-2μm particles.<ul><li>Fast separations with excellent resolution and sensitivity</li><li>Lower backpressures so that UHPLC is not required</li><li>Optimized for MS detection</li><li>Excellent peak shapes</li><li>Excellent combination of speed and efficiency</li></ul><h4>Specifications</h4><ul><li>Endcapped: Yes</li><li>For Use With: HPLC</li><li>Max. Pressure: 14500 psi (1000 bar)</li><li>Packing Material: Spherical, Solid Core, Ultrapure Silica</li><li>Particle Shape: Spherical Solid Core</li><li>Stationary Phase: Proprietary</li><li>Surface Area: 130 m²/g</li><li>Temperature: 60°C</li><li>USP Type: N/A</li><li>Carbon Load: 7%</li><li>Phase: Reversed Phase</li><li>Pore Size: 80 Å</li><li>pH: 2 to 9</li></ul>

Thermo Scientific Accucore C18 HPLC Columns

Use this column, with its specially designed solid core, for a broad range of nonpolar analytes across multiple applications.

Achieve fast, high-resolution separations at low backpressures using Thermo Scientific™ Accucore™ C18 LC columns. Rugged 2.6μm solid-core particles ensure high efficiencies and enable compatibility with both HPLC and UHPLC platforms.&nbsp;The high bonded phase coverage provides optimal retention of a broad range of nonpolar analytes across multiple applications. Robust bonding technology and automated packing procedures ensure excellent reproducibility and long column lifetimes.<h5>Optimal Selectivity for Nonpolar Compounds</h5><ul><li>Hydrophobic interaction mechanism</li></ul><h5>Fast Separations</h5><ul><li>2.6μm core-enhanced technology particles enable operation at high flow rates without generating excessive backpressures.</li></ul><h5>Excellent Peak Shapes for Enhanced Resolution and Sensitivity</h5><ul><li>Solid core 2.6μm particles and narrow particle size distribution reduce band broadening and improve separation efficiencies.</li><li>High surface coverage of silica minimizes secondary interactions and peak tailing.</li></ul><h5>Low Backpressures</h5><ul><li>Solid core 2.6μm particles for less backpressure compared to UHPLC sub-2μm particles</li><li>Compatible with conventional HPLC instrumentation and UHPLC platforms</li></ul><h5>Excellent Reproducibility and Robustness</h5><ul><li>Advanced bonding technology</li><li>Automated packing process</li></ul><h4>Specifications</h4><ul><li>Endcapped: Yes</li><li>For Use With: HPLC</li><li>Max. Pressure: 14500 psi (1000 bar)</li><li>Packing Material: Spherical, Solid Core, Ultrapure Silica</li><li>Particle Shape: Spherical Solid Core</li><li>Stationary Phase: C18</li><li>Surface Area: 130 m²/g</li><li>Temperature: 70°C</li><li>USP Type: L1</li><li>Carbon Load: 9%</li><li>Phase: Reversed Phase</li><li>Pore Size: 80 Å</li><li>pH: 1 to 11</li></ul>

Thermo Scientific Accucore C8 HPLC Columns

Improve separation speed and resolution while maintaining low backpressures using Thermo Scientific™ Accucore™ C8 LC Columns. 

Improve separation speed and resolution while maintaining low backpressures using Thermo Scientific™ Accucore™ C8 LC Columns. Rugged 2.6μm solid-core particles ensure high efficiencies and enable compatibility with both HPLC and UHPLC platforms.&nbsp;The high coverage C8 bonded phase provides optimal retention of analytes with moderate hydrophobicity. Robust bonding technology and automated packing procedures ensure excellent reproducibility and long column lifetimes.<h5>Lower Hydrophobic Retention</h5><ul><li>Recommended for moderately hydrophobic analytes or for when a less hydrophobic phase provides optimum retention</li></ul><h5>Fast Separations</h5><ul><li>2.6μm core-enhanced technology particles enable operation at high flow rates without generating excessive backpressures.</li></ul><h5>Excellent Peak Shapes for Enhanced Resolution and Sensitivity</h5><ul><li>Solid core 2.6μm particles and narrow particle size distribution reduce band broadening and improve separation efficiencies.</li><li>High surface coverage of silica minimizes secondary interactions and peak tailing.</li></ul><h5>Low Backpressures</h5><ul><li>Solid core 2.6μm particles for less backpressure compared to UHPLC sub-2μm particles</li><li>Compatible with conventional HPLC instrumentation and UHPLC platforms</li></ul><h5>Excellent Reproducibility and Robustness</h5><ul><li>Advanced bonding technology</li><li>Automated packing process</li></ul><h4>Specifications</h4><ul><li>Endcapped: Yes</li><li>For Use With: HPLC</li><li>Max. Pressure: 14500 psi (1000 bar)</li><li>Packing Material: Spherical, Solid Core, Ultrapure Silica</li><li>Stationary Phase: C8</li><li>Surface Area: 130 m²/g</li><li>Temperature: 70°C</li><li>USP Type: L7</li><li>Carbon Load: 5%</li><li>Phase: Reversed Phase</li><li>Pore Size: 80 Å</li><li>pH: 2 to 9</li></ul>

Thermo Scientific Accucore aQ C18 Polar Endcapped HPLC Columns

Separate polar compounds with improved speed and resolution using Thermo Scientific™ Accucore™ aQ C18 Polar Endcapped LC columns.

Separate polar compounds with improved speed and resolution using Thermo Scientific™ Accucore™ aQ C18 Polar Endcapped LC columns. Rugged 2.6μm solid-core particles enable fast, high-efficiency separations at low backpressures.The polar endcapped C18 stationary phase provides optimal retention of polar analytes and is fully compatible with 100% aqueous mobile phases. Robust bonding technology and automated packing procedures ensure excellent reproducibility and long column lifetimes.<h5>Alternative Selectivity</h5><ul><li>Polar endcapped C18 stationary phase provides optimum retention of polar analytes</li><li>Accucore aQ Columns are compatible with highly aqueous mobile phases.</li><li>Polar encapping allows use in 100% aqueous mobile phases without loss of performance or stability.</li></ul><h5>Fast Separations</h5><ul><li>2.6μm core-enhanced technology particles enable operation at high flow rates without generating excessive backpressures.</li></ul><h5>Excellent Peak Shapes for Enhanced Resolution and Sensitivity</h5><ul><li>Solid-core 2.6μm particles and narrow particle size distribution reduce band broadening and improve separation efficiencies.</li><li>High surface coverage of silica minimizes secondary interactions and peak tailing.</li></ul><h5>Low Backpressures</h5><ul><li>Solid-core 2.6μm particles for less backpressure compared to UHPLC sub-2μm particles</li><li>Compatible with conventional HPLC instrumentation and UHPLC platforms</li></ul><h5>Excellent Reproducibility and Robustness</h5><ul><li>Advanced bonding technology</li><li>Automated packing process</li></ul><h4>Specifications</h4><ul><li>Endcapped: Polar</li><li>Max. Pressure: 14500 psi (1000 bar)</li><li>Packing Material: Spherical, Solid Core, Ultrapure Silica</li><li>Particle Shape: Spherical Solid Core</li><li>Stationary Phase: C18</li><li>Surface Area: 130 m²/g</li><li>Temperature: 70°C</li><li>USP Type: L1</li><li>Carbon Load: 9%</li><li>Phase: Reversed Phase</li><li>Pore Size: 80 Å</li><li>pH: 2 to 9</li></ul>

Products focused on Consumables from Thermo Fisher Scientific - page 10

Related content

News from LabRulezLCMS Library - Week 26, 2026

How to Choose the Right Membrane for Your Syringe Filter

Accelerating Biomarker Discovery and Validation: From Discovery to Clinical Utility