<div>Mulching films used in agriculture gradually break down and can become a significant source of microplastics in soils. A new study shows that these particles affect not only soil structure but also microbial life and nitrogen cycling.“We wanted to understand how microplastics from both conventional and biodegradable mulching films influence soil properties, microbial diversity and functions in real conditions,” explains Klára Šmídová, the study’s co-author . “That’s why we added realistic amounts of microplastics to soils in experimental plots in Finland, Germany, and Spain, monitored them over two growing seasons, and compared them with the control plots.”The results revealed that microplastics alter soil characteristics and microbial communities, although not always in the same way. “ However, a consistent finding was the decline in microbial activity associated with key processes, including nitrogen cycling, with negative effects increasing at higher microplastic concentrations and becoming more pronounced in the second year,” Šmídová adds. Because the microplastic levels used in the study reflect amounts already found in European soils, the findings highlight real risks to soil health. “We also found that the effects were stronger in southern than in northern Europe, likely due to differences in climate and soil conditions. This means that protecting soils from plastic pollution will require region-specific risk assessments,” she says.Over 60% of European soils are estimated to be unhealthy, with ongoing degradation driven by unsustainable land use, contamination, climate change, and extreme weather events. In response, the EU Parliament adopted the Soil Monitoring Law in October 2025, aiming to achieve healthy soils across Europe by 2050. “The law highlights the role of soil health in food security, water quality, and climate objectives, and establishes consistent soil monitoring across Member States. It includes measures to support farmers and foresters, while also creating a public list of potentially contaminated sites and an indicative watch list of emerging soil contaminants,” explains Klára Šmídová.The project brought together 19 research groups across Europe. “After each season, hundreds of samples were colle cted and sent to partners for analysis. This paper focuses on soil properties, microbial diversity, and greenhouse gas emissions. Two more manuscripts—on plastic additives and microplastic fate, and on soil invertebrates—are in preparation. Together, they will give us a complete picture of how agricultural microplastics affect soil ecosystems,” concludes Klára Šmídová.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/RECETOX_Vysledky_nove_studie_ukazaly_ze_mikroplasty_meni_vlastnosti_pudy_a_mikrobialni_spolecenstva_i_v_realnych_podminkach_6ee3413a7b.jpg" alt="RECETOX: New Study Reveals How Agricultural Plastics Impact Soil Health In Real Conditions" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_RECETOX_Vysledky_nove_studie_ukazaly_ze_mikroplasty_meni_vlastnosti_pudy_a_mikrobialni_spolecenstva_i_v_realnych_podminkach_6ee3413a7b.jpg 171w," sizes="100vw" width="738" height="674"><blockquote><h4>The Original article</h4><h4><a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0269749125015866?via%3Dihub#sec2">Conventional and biodegradable agricultural microplastics: effects on soil properties and microbial functions across a European pedoclimatic gradient</a></h4>Šmídová K., Soinne H., Kim S. W., Tirronniemi J., Meffe R., Redondo-Hasselerharm P. E., Braun M., Rillig M. C., Fritze H., Adamczyk B., Nikama J., Kaseva J., Saartama V., Amelung W., Hurley R., Hofman J., Nizzetto L., Selonen S., Velmala S.Environ. Pollut. 386 (2025) 127212<a href="DOI:%2010.1016/j.envpol.2025.127212">DOI:&nbsp;10.1016/j.envpol.2025.127212</a><h6>licensed under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/">CC-BY 4.0</a></h6></blockquote><h4>Abstract</h4><div>Agricultural plastics like mulching films may become a major source of microplastic (MP) soil contamination during their degradation and fragmentation. This study investigates the effects of agricultural MPs from conventional (linear low-density polyethylene, PE) and biodegradable (starch-blended polybutylene adipate co-terephthalate, PBAT-BD) mulching films on soil physicochemical properties, aggregation, microbial diversity and functions, litter decomposition, and greenhouse gases emissions (GHG). For this purpose, MPs were mixed into soils at realistic MP concentrations of 0.005&nbsp;% and 0.05&nbsp;% (w/w) in 2022 on experimental plots in three EU countries representing different pedoclimatic conditions (Finland, Germany and Spain), followed by monitoring of the above-mentioned variables in the subsequent growing seasons 2022 and 2023. We found several significant MP-induced effects for soil properties, aggregation, microbial diversity, litter decomposition, and GHG, but the effect endpoints were less pronounced or varied considerably. Contrarily, microbial activity, contributing to soil functions such as nitrogen cycling, was consistently reduced by both conventional and biodegradable MPs. The reductions were more pronounced after the second season and for the higher MP treatment. As the higher MP concentration (i.e., 0.05&nbsp;% w/w) is environmentally relevant in Europe, our findings emphasize the potential effects of environmentally relevant MP concentrations on soil health. Furthermore, the effects increased from north to south, probably modulated by varying pedoclimatic conditions, inducing reflection of a need for regionally tailored risk</div></div>

New Study Reveals How Agricultural Plastics Impact Soil Health In Real Conditions

<h3>Charged for Action: The Hidden Secrets of AEX Oligonucleotide Analysis</h3>Oligonucleotides—short, well-defined fragments of DNA or RNA—have become indispensable tools in modern life sciences. They underpin cutting-edge applications in molecular diagnostics, gene therapy, and pharmaceutical development. Before oligonucleotides can be confidently used in research or clinical settings, however, their quality must be rigorously assessed. Purity, sequence integrity, length distribution, and chemical modifications all play a decisive role in their performance.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Oligos_Made_Easy_Part_2_AEX_2_45eee54fa0.jpg" alt="KNAUER: Oligos Made Easy - Part 2: AEX" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Oligos_Made_Easy_Part_2_AEX_2_45eee54fa0.jpg 245w," sizes="100vw" width="1534" height="711">Among the analytical techniques available today, anion exchange chromatography (AEX) stands out as a robust and highly informative method for characterizing oligonucleotides. By exploiting their intrinsic negative charge, AEX provides detailed insight into product composition and impurity profiles that are difficult to obtain by other approaches.<blockquote><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/article/6808">Part 1 of the Oligos series: A Practical Guide to Oligonucleotide Production – From Concept to Final Product</a></blockquote><h4>How Scientists Read Oligonucleotides Using Charge</h4>At the core of AEX lies a simple but powerful principle: oligonucleotides carry a negatively charged phosphate backbone. This charge increases in a predictable way with strand length and, to a lesser extent, sequence composition. Anion exchange chromatography uses this property to separate oligonucleotides based on differences in charge strength and interaction with a positively charged stationary phase.As a result, AEX has become one of the most widely used analytical tools for evaluating oligonucleotide quality. It allows scientists to distinguish full-length products from truncated species, degradation products, or closely related variants—often with single-nucleotide resolution.<h4>Why Ion Exchange Works: Binding, Retention, and Release</h4>Ion exchange chromatography (IEX) relies on electrostatic interactions between analytes and a charged stationary phase. In the case of oligonucleotides, anion exchange is used, where negatively charged molecules interact with positively charged functional groups on the resin—most commonly quaternary amines.The system consists of two main components:<ul><li>Stationary phase: A positively charged resin that binds anionic analytes.</li><li>Mobile phase: An aqueous buffer system, typically combined with a salt gradient, that controls both pH and elution strength.</li></ul>Retention in AEX is governed primarily by charge. Molecules with weaker overall charge interact less strongly with the stationary phase and elute earlier, while more highly charged oligonucleotides bind more tightly and require stronger elution conditions.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Oligos_Made_Easy_Part_2_AEX_Figure_1_IEX_overview_including_elution_order_dependency_on_analyte_charge_3419ad3075.jpg" alt="KNAUER: Oligos Made Easy - Part 2 AEX: Figure 1 IEX overview including elution order dependency on analyte charge." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Oligos_Made_Easy_Part_2_AEX_Figure_1_IEX_overview_including_elution_order_dependency_on_analyte_charge_3419ad3075.jpg 245w," sizes="100vw" width="1583" height="654"><h4>The Five-Step Workflow of Ion Exchange Chromatography</h4>AEX separations generally follow a well-established sequence of steps:<ol><li>Column equilibration The column is conditioned with the starting buffer until the baseline and pH are stable. This ensures that all charged sites on the resin are ready for interaction.</li><li>Sample loading Samples, prepared in the starting buffer, are introduced under conditions that promote binding of the target oligonucleotides while minimizing retention of unwanted impurities.</li><li>Washing The column is washed with the starting buffer to remove uncharged or weakly interacting components. The baseline stabilizes as these species are flushed away.</li><li>Elution Bound oligonucleotides are released using a salt or pH gradient. Increasing ionic strength introduces competing ions that displace the analytes from the resin. Weakly bound species elute first; strongly charged oligonucleotides elute later.</li><li>Regeneration and re-equilibration A high-salt buffer removes any remaining bound material. The column is then returned to starting conditions in preparation for the next analysis.</li></ol><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Oligos_Made_Easy_Part_2_AEX_Figure_2_Five_steps_of_IEX_procedure_in_blue_outlined_using_an_example_chromatogram_in_red_38dd70b1b1.jpg" alt="KNAUER: Oligos Made Easy - Part 2 AEX: Figure 2 Five steps of IEX procedure (in blue), outlined using an example chromatogram (in red)." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Oligos_Made_Easy_Part_2_AEX_Figure_2_Five_steps_of_IEX_procedure_in_blue_outlined_using_an_example_chromatogram_in_red_38dd70b1b1.jpg 245w," sizes="100vw" width="1583" height="674"><h4>Why AEX Is Especially Effective for Oligonucleotides</h4>The repeating phosphate backbone of oligonucleotides gives rise to a strong and uniform anionic character across a wide pH range (typically pH 7–9). This makes oligonucleotides exceptionally well suited for anion exchange separations.Key factors influencing AEX behavior include:<ul><li>Charge density: Longer oligonucleotides carry more negative charges and therefore exhibit stronger retention.</li><li>Resin chemistry: Strong and weak anion exchangers differ in functional groups and pH stability, influencing selectivity and robustness.</li><li>Buffer composition: The choice of buffering ions and salt gradients directly affects elution strength and resolution.</li></ul>Salt gradients—commonly based on chloride ions—compete with the oligonucleotide backbone for binding sites on the resin. By carefully tuning gradient slope and composition, analysts can achieve highly reproducible and finely resolved separations.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Oligos_Made_Easy_Part_2_AEX_Figure_3_Ionic_interactions_and_p_H_influence_on_Anion_Exchange_Chromatography_AEX_612e231ba4.jpg" alt="KNAUER: Oligos Made Easy - Part 2 AEX: Figure 3 Ionic interactions and pH influence on Anion Exchange Chromatography (AEX)." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Oligos_Made_Easy_Part_2_AEX_Figure_3_Ionic_interactions_and_p_H_influence_on_Anion_Exchange_Chromatography_AEX_612e231ba4.jpg 245w," sizes="100vw" width="1547" height="593"><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Oligos_Made_Easy_Part_2_AEX_Figure_4_AEX_buffer_selection_and_gradient_strategy_chromatogram_with_red_buffer_gradient_curve_53fd1bb11b.jpg" alt="KNAUER: Oligos Made Easy - Part 2 AEX: Figure 4 AEX buffer selection and gradient strategy (chromatogram with red buffer gradient curve)." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Oligos_Made_Easy_Part_2_AEX_Figure_4_AEX_buffer_selection_and_gradient_strategy_chromatogram_with_red_buffer_gradient_curve_53fd1bb11b.jpg 245w," sizes="100vw" width="1600" height="327"><h4>AEX as the Gold Standard for Oligonucleotide Separation</h4>Anion exchange chromatography has become the method of choice for both analytical and preparative oligonucleotide workflows. Its advantages include:<ul><li>High resolving power: Closely related impurities, including n–1 or n–2 species, can often be separated and quantified.</li><li>Predictable retention behavior: In many cases, retention time correlates linearly with oligonucleotide length, simplifying identification.</li><li>Compatibility with modified oligonucleotides: Even chemically modified sequences retain their anionic nature, allowing AEX to resolve both products and related impurities.</li><li>Excellent control via gradient elution: Salt gradients provide precise tuning of selectivity and resolution.</li></ul>Typically, shorter or degraded oligonucleotides elute at lower ionic strength, while full-length products with higher charge density appear later in the chromatogram.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Oligos_Made_Easy_Part_2_AEX_Figure_5_AEX_Advantages_and_Challenges_7835521e34.jpg" alt="KNAUER: Oligos Made Easy - Part 2 AEX: Figure 5 AEX Advantages and Challenges." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Oligos_Made_Easy_Part_2_AEX_Figure_5_AEX_Advantages_and_Challenges_7835521e34.jpg 245w," sizes="100vw" width="1535" height="707"><h4>Final Perspective: Mastering AEX with Confidence</h4>Anion exchange chromatography may appear complex at first, but with thoughtful optimization of pH, buffer composition, and gradient conditions, it becomes a highly precise and reliable tool for oligonucleotide analysis. When properly applied, AEX delivers sharp peaks, excellent resolution, and robust performance—even for challenging sequences and modifications.For laboratories developing or refining oligonucleotide workflows, AEX offers both analytical depth and operational confidence.<blockquote>If you would like to discuss AEX method development or optimization for oligonucleotides, feel free to contact us at sales@knauer.net. More insights into practical oligonucleotide analysis will follow in our “Oligos Made Easy” series.For technical questions or in-depth discussion, the author can be reached at kindler@knauer.net</blockquote>

Oligos Made Easy - Part 2: AEX

News from LabRulezLCMS Library - Week 07, 2026

Article

Application

Plastics

Environment

Science and research

Poster

RECETOX (Research Centre for Toxic Compounds in the Environment) is an independent department of the Faculty of Science of Masaryk University in Brno, which has been established in 1983. RECETOX is focused on the research and education in cross-cutting area of Environment and Health. It addresses interactions among chemicals, environment, and biological systems, including consequences at local, regional, and global levels.

RECETOX - Centrum pro výzkum toxických látek v prostředí

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Based in Berlin, KNAUER is a medium-sized, owner-managed company that has been serving the sciences since 1962. We develop and manufacture scientific instruments of superior quality for liquid chromatography, including: Analytical HPLC/UHPLC, Preparative HPLC, Fast protein liquid chromatography (FPLC), Multi-column chromatography/Simulated moving bed (SMB) chromatography. High pressure dosing, in-line detection systems, and osmometry are additional business areas.

KNAUER

Agilent Technologies

<ol>
<li>Strategies for sample cleanup</li>
<li>Chromatography problems caused by sample matrix</li>
</ol>
<ul>
<li>Physical effects</li>
<li>Chemical effects</li>
</ul>

Agilent Technologies: Techniques for Avoiding Unexpected Problems in LC and GC Analysis

Techniques for Avoiding Unexpected Problems in LC and GC Analysis

Now you’re lost because your chromatography is not where it should be. What do you do?
In this talk we’ll look at ways to troubleshoot what went wrong and discuss things you can do to keep them from happening in the future.
In this talk we’ll discuss:
<ul>
<li>Common chromatography problems including pressure, peak shape issues like tailing, and retention time shifts
</li>
<li>How to isolate the problem and whether it’s related to chemistry or your instrument hardware/software
</li>
<li>Identifying the problem and taking corrective action can help prevent the same thing from happening in the future.
</li>
</ul>
<blockquote>
Presenter: Jean Lane (Application Engineer, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Jean has been employed with Agilent since Nov 2010 in technical and applications support and has a primary role supporting Agilent’s full line of LC columns and consumables, which also includes support for Agilent’s GPC/SEC product line. She came to Agilent thru acquisition of Varian and the former Polymer Laboratories. Jean has 20 plus years of technical and applications support for both HPLC and GPC consumable products. In addition to practical chromatography experience in the laboratory, she has had many, many years in her technical role involving customer support providing assistance and troubleshooting for customer chromatography issues.
</blockquote>

Agilent Technologies: Surviving Chromatography Part II Corrective Action

Surviving Chromatography Part II Corrective Action

Ways to troubleshoot what went wrong and things you can do to keep them from happening in the future.

Improving an existing method is an opportunity to save time, money and sample.
Whether you’re developing a new method or updating an older one, there are several questions to consider, including:
<ul>
<li>Is the goal to reduce analysis time and/or improve resolution?
</li>
<li>Is the method isocratic or gradient?
</li>
<li>What HPLC parameters will be key to success?
</li>
<li>What are the column options and will they work with your instrumentation?
</li>
<li>Modernizing a legacy method, whether it’s a reference method from the USP, AOAC, or EPA or an internal one, can simplify testing and improve accuracy, ruggedness, and sample throughput.
</li>
</ul>
<blockquote>
Presenter: Mark Powell (Application Engineer, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Mark Powell is an Applications Engineer located at Agilent’s Little Falls site in Wilmington, DE. Before joining Agilent in 2011, Mark worked in the pharmaceutical industry synthesizing, purifying and analyzing drug candidates. He provides applications assistance and technical support for Agilent’s HPLC columns and consumables.
</blockquote>

Agilent Technologies: Updating Old Methods, Is the Gain Worth the Pain?

Updating Old Methods, Is the Gain Worth the Pain?

Improving an existing method is an opportunity to save time, money and sample.

If you’ve ever looked at a chromatogram and said, “What’s that?” or thought “That’s not supposed to be there!”, this talk is for you.
We will be discussing:
<ul>
<li>Chromatography problems that can be caused by sample matrix
</li>
<li>How to deal with unwanted matrix effects
</li>
<li>Strategies for cleaning up your sample and how that helps protect your column and instrument
</li>
<li>Unexpected sources of unknown peaks
</li>
<li>Unexpected peaks and issues are often the result of the sample matrix. Understanding what to do about it can help you get the reliable and reproducible chromatography you want.
</li>
</ul>
<blockquote>
Presenter: Golnar Javadi (Application Engineer, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Golnar Javadi is an applications engineer providing online applications assistance and technical support for LC columns and supplies, Sample Preparation products, and Spectroscopy supplies.
</blockquote>
<blockquote>
Before joining Varian and then Agilent, Golnar worked in the pharmaceutical and nutraceutical industries on method development and quality control. She also taught college level chemistry courses for a few years.
</blockquote>
<blockquote>
Golnar then joined Varian as a technical support specialist, providing customers with method development assistance and technical support on Sample Preparation (SPE, SLE, and Filtration), HPLC, GC, ToxiLab and DAT. After the Varian-Agilent merger, Golnar joined Agilent Technologies as an Applications Engineer. She provides technical support to customers on Sample Preparation products, Liquid Chromatography columns, and Spectroscopy supplies.
</blockquote>

Agilent Technologies: Oh, What a Mess! Dealing with Unwanted Matrix Effects

Oh, What a Mess! Dealing with Unwanted Matrix Effects

If you’ve ever looked at a chromatogram and said, “What’s that?” or thought “That’s not supposed to be there!”, this talk is for you.

Common problems like pressure, peak shape changes, retention time shifts, and changes in detection are ones HPLC chromatographers routinely struggle with.
In this webinar we will work through troubleshooting strategies to help you with them. When a problem arises, it is important to determine if it’s more likely related to the instrument or something with the column. The answer could be either one of them, but it might also be something else like the sample or mobile phase. Looking at both the instrument and the column, we will walk through steps used to help track down the potential cause and recommend a course of action to help resolve the problem.
<blockquote>
Presenter: Mark Powell (Application Engineer, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Mark Powell is an Applications Engineer located at Agilent’s Little Falls site in Wilmington, DE. Before joining Agilent in 2011, Mark worked in the pharmaceutical industry synthesizing, purifying and analyzing drug candidates. He provides applications assistance and technical support for Agilent’s HPLC columns and consumables.
</blockquote>

Agilent Technologies: From Instrument to Column: Tracking Down the Problem

From Instrument to Column: Troubleshooting in HPLC

Helping you with troubleshooting strategies in HPLC.

If you want to treat yourself to good chromatography understanding your method goals or priorities is a key part but there are other things to consider as well.
Things like:
<ul>
<li>Column choice and characteristics
</li>
<li>Method parameters like temperature
</li>
<li>Mobile phase choice
</li>
<li>Your sample and its characteristics
</li>
<li>Potential limitations of your instrument
</li>
</ul>
We’ll discuss tricks to help identify what you should look at more closely and tips to help optimize your results.
<blockquote>
Presenter: Rita Steed (Application Engineer, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Rita Steed began supporting the LC column line for Agilent in 1999. As a Chromatography Specialist (first with Chromatography, Inc., then directly for Agilent), Rita worked on-site with researchers in Pharmaceutical and other industries presenting technical seminars and assisting researchers with troubleshooting and method development. Rita has over 20 years of Chromatography experience in the Biotechnology, Chemical, and Pharmaceutical industries. She has held positions in Research, Sales, and Technical Service. Rita has earned degrees in Microbiology and Life Sciences/Biochemistry. In her current position, she is an inside Application Engineer supporting LC columns.
</blockquote>

Agilent Technologies: Treat Yourself to Good Chromatography: Helpful Tricks

Treat Yourself to Good Chromatography: Helpful Tricks

Tricks to help identify what you should look at more closely and tips to help optimize your results.

Troubleshooting an HPLC system can be a daunting task. In this seminar we will:
<ul>
<li>Look at how to isolate the problem
</li>
<li>Discuss the most common column problems and their solutions including:
<ul>
<li>Pressure
</li>
<li>Peak Shape
</li>
<li>Retention
</li>
</ul>
</li>
</ul>
We will also look at examples where you may think it’s your column but it’s actually related to your instrument such as:
<ul>
<li>Dwell volume</li>
<li>Extra Column Volume</li>
<li>Detector Response Rate</li>
</ul>
<blockquote>
Presenter: Rita Steed (Application Engineer, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Rita Steed began supporting the LC column line for Agilent in 1999. As a Chromatography Specialist (first with Chromatography, Inc., then directly for Agilent), Rita worked on-site with researchers in Pharmaceutical and other industries presenting technical seminars and assisting researchers with troubleshooting and method development. Rita has over 20 years of Chromatography experience in the Biotechnology, Chemical, and Pharmaceutical industries. She has held positions in Research, Sales, and Technical Service. Rita has earned degrees in Microbiology and Life Sciences/Biochemistry. In her current position, she is an inside Application Engineer supporting LC columns.
</blockquote>

Agilent Technologies: LC Column Troubleshooting – Isolating the Source of the Problem

LC Column Troubleshooting – Isolating the Source of the Problem

Isolating the Source of the Problem

If you’re doing food testing and want to find ways to do more with less while getting consistent accurate results this seminar is for you.
We will walk through a sample application – multi-residue pesticides in fish using LC/MS – from sample prep to data analysis, and point out tips for saving both time and money and improving results. Key topics covered will be column selection, tips for extending column life and “just enough” sample prep solutions that reduce time spent on sample prep.
<blockquote>
Presenter: Mark Powell (Application Engineer, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Mark Powell is an Applications Engineer located at Agilent’s Little Falls site in Wilmington, DE. Before joining Agilent in 2011, Mark worked in the pharmaceutical industry synthesizing, purifying and analyzing drug candidates. He provides applications assistance and technical support for Agilent’s HPLC columns and consumables.
</blockquote>

Agilent Technologies: New:Troublefree Food Testing - Technologies to Improve Uptime and Productivity

Troublefree Food Testing - Technologies to Improve Uptime and Productivity

Sample application – multi-residue pesticides in fish using LC/MS.

Technologies to Improve Uptime and Productivity

Very polar compounds have poor retention in reversed phase and can be challenging to separate.
In this talk, we will discuss changes to your reversed phase conditions that can help. We’ll also look at the benefits of choosing a more polar stationary phase.
If that doesn’t work you may need to explore other types of chromatography.
Some of those options are:
<ul>
<li>HILIC
</li>
<li>Ion Pair
</li>
<li>Normal Phase
</li>
</ul>
Advantages and disadvantages of these options will be discussed.
<blockquote>
Presenter: Mark Powell (Application Engineer, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Mark Powell is an Applications Engineer located at Agilent’s Little Falls site in Wilmington, DE. Before joining Agilent in 2011, Mark worked in the pharmaceutical industry synthesizing, purifying and analyzing drug candidates. He provides applications assistance and technical support for Agilent’s HPLC columns and consumables.
</blockquote>

Agilent Technologies: Too Polar for Reversed Phase - What do you do?

Too Polar for Reversed Phase - What do you do?

Changes to your reversed phase conditions that can help.

The technique of Gel Permeation Chromatography is conceptually simple: It is a separation based on size where no enthalpic interactions are observed.
In practice, GPC is often much more involved yielding involved method development and data that can be difficult to interpret. Though GPC can seem mystifying at times 90% of the success is achieved by using the proper columns for your application.
During this e-seminar we will discuss what is new in GPC column technology, different types of stationary phases, and how to choose the best columns which yield:
<ul>
<li>Improved resolution
</li>
<li>Improved reproducibility
</li>
<li>Improved accuracy
</li>
<li>Improved analysis time
</li>
</ul>
The goal of the e-seminar is to illustrate how proper GPC column selection can make the difference between good and great chromatography.
<blockquote>
Presenter: Michael Kruger (Application Engineer, Agilent Technologies, Inc.)
</blockquote>

Agilent Technologies: Achieving Superior GPC Results Through the Correct Column Selection

Achieving Superior GPC Results Through the Correct Column Selection

What is new in GPC column technology, different types of stationary phases, and how to choose the best columns.

LCMS webinars focusing on Tips & Tricks - page 40