<p><strong>Our Library never stops expanding. What are the most recent contributions to LabRulezLCMS Library in the week of 8th December 2025? Check out new documents from the field of liquid phase, especially HPLC and LC/MS techniques!</strong></p><blockquote><p><span style="font-size:20px;">👉 </span><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library"><span style="font-size:20px;"><strong>SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT LCMS AND RELATED TECHNIQUES</strong></span></a></p></blockquote><blockquote><p><strong>👉 Need info about different analytical techniques?</strong> Peek into <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library"><strong>LabRulezGCMS</strong></a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library"><strong>LabRulezICPMS</strong></a> libraries.</p></blockquote><p>This week we bring you application notes by <strong>Agilent Technologies </strong>and<strong> Waters Corporation, </strong>technical note by <strong>Shimadzu </strong>and poster by <strong>Thermo Fisher Scientific / ASMS!</strong></p><h3><strong>1. Agilent Technologies: Robust and Reproducible Monitoring of PFAS in Treated Wastewater by Direct Injection on 6495D LC/MS</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_pfas_wastewater_lctq_5994_8346en_agilent_c2412e7d84.pdf"><strong>Full PDF for download</strong></a></li></ul><p>PFAS is a class of synthetic chemicals that are resistant to heat, water, grease, and oil. Exposure to this class of chemicals is widespread and their ability to move and persist in the environment makes them difficult to clean up. Found in everyday household and workplace products such as drinking water, food packaging, fish caught from compromised environments, and personal care products is an indication of how widespread the use of PFAS and its contamination in the&nbsp;environment.&nbsp;</p><p>Traditional techniques of analysis to enhance sensitivity incorporate the use of solid phase extraction, which allows enrichment of the sample before injection. Increased awareness of emerging contaminants has necessitated the need for higher throughput methods, some bypassing the sample preparation step, to decrease sample analysis time. Direct injection analysis can save time by removing the need to prepare samples but still providing robustness and reproducibility to justify its capabilities and improved&nbsp;efficiency.</p><h4><strong>Experimental</strong></h4><h5><strong>Instrumentation&nbsp;</strong></h5><p><strong>Liquid chromatography system:&nbsp;</strong></p><ul><li>Agilent 1290 Infinity II Bio-LC High‑Speed Pump (G7132A)&nbsp;</li><li>Agilent 1290 Infinity II Bio-LC Multisampler (G7137B)&nbsp;</li><li>Agilent 1290 Infinity II Multicolumn Thermostat (G7116B)&nbsp;</li></ul><p><strong>Mass spectrometry system:&nbsp;</strong></p><ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=6495D"><strong>Agilent 6495D Triple Quadrupole LC/MS (G6495D)&nbsp;</strong></a></li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=Jet+Stream"><strong>Agilent Jet Stream (AJS) Source</strong></a> A PFC free kit, together with a delay column, was also used.</li></ul><h4><strong>Results and discussion&nbsp;</strong></h4><p>The sensitivity of the method was calculated with ten spikes of water at 1&nbsp;ng/L resulting in the method detection limit. The calculated concentration was prior to dilution of methanol and demonstrates that all but three analytes were equal or less than 1 ng/L detection limits, the analytes with greater than 1&nbsp;ng/L MDL were 3:3 FTCA and 8:2 FTSA (Table 6).</p><h4><strong>Conclusion&nbsp;</strong></h4><p>The increased awareness of PFAS globally has meant that regulations are constantly being adopted and larger amounts of samples at lower limits are required. By incorporating the direct injection technique on the Agilent 6495D LC/MS we get a combination of high sample throughput while providing excellent analytical sensitivity. Also, increasing throughput and reducing consumables cost creates increased value in the instrument. The method displays a clean baseline and sensitivity with the observation of 1 ng/L detection in spiked wastewater. Reproducibility and robustness were measured between the concentrations of 0.5 to 100 ng/L on the 6495D LC/MS. The system was able to detect 38 PFAS between 0.25 to 3.4 ng/L with RSD &lt; 20% over 150&nbsp;direct injections, providing confidence in the data for a complex matrix like&nbsp;wastewater.</p><h3><strong>2. Shimadzu: A sustainable analytical approach for detecting extra virgin olive oil adulteration using Nexera™ UC</strong></h3><ul><li>Technical note</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/c190_e341_c488032e81.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Knowledge of the composition of triacylglycerols (TAGs) in vegetable oils is important for dietary and nutritional reasons, due to the influence of the different properties of each fatty acid on the human organism. Specifically, extravirgin olive oil (EVOO) is a popular food ingredient worldwide, and for this reason, detecting economically motivated adulteration is important to protect consumers’ interest and health[1]. According to the latest report from the EU Food Fraud Network (European Union, 2021), olive oil (OO) tops the list of reported adulterated food products. The official methods to assess OO purity and detect the presence of extraneous vegetable oils include the analysis of fatty acids (FAs), triacylglycerols (TAGs) and sterols (Regulation (EU) No 2568/91 and its amendments) [2].&nbsp;</p><p>A variety of chromatographic techniques has been employed for TAGs analysis and separation. High-performance liquid chromatography (HPLC) methods, which use reversed-phase (RP) and silver-ion (Ag) columns for TAGs separation, have been employed either independently or in combination[3]. However, both these approaches have the drawback of relying on toxic organic solvents. The alternative separation technique employed in TAGs analysis is supercritical fluid chromatography (SFC) coupled with a UV detector at very low wavelengths, due to the weak UV absorption of the mobile phase. In this study, a fast, simple and green methodology was optimized to detect intentionally adulterated olive oil with cheaper seed oils at different levels by means of SFC with UV detection, followed by statistical analysis.</p><h4><strong>2. Experimental</strong></h4><h5><strong>2.2 SFC-PDA Nexera™ UC system&nbsp;</strong></h5><p>All experiments were performed on a <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=1&amp;search=Nexera%E2%84%A2+UC"><strong>Nexera™ UC system</strong></a> (Shimadzu Europa, Germany). The system was equipped with a CBM-20A communication bus module, a DGU-20A5R degasser, an LC-30ADSF CO2 pump, one LC-20ADXR dual plunger parallelflow pump, a Sil-30AC autosampler, a CTO-20AC column oven, a SPD-M20A photodiode array (PDA) detector, and a SFC-30A backpressure regulator (BPR). Chromatograms were recorded using Shimadzu <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=1&amp;search=LabSolutions"><strong>LabSolution</strong></a> ver. 5.80 software. Four Ascentis Express C18 columns, provided by KGaA (Darmstadt, Germany), were connected in series for TAGs separation. The analytical conditions used are summarized in Table 1.</p><h4><strong>3. Results and discussion&nbsp;</strong></h4><p>Using four C18 columns packed with superficially porous particles, a highly efficient separation of TAGs with an isocratic elution mode was provided, allowed for complete sample TAG elution within 30 min with the conditions used in this method (Figure 1). Peak identification was carried out according to partition number (PN), the published composition of these common vegetable oils and the relative amount of major and minor peaks, and finally taking into account TAGs retention times. For compounds with identical PN, separation was achieved based on the number of unsaturations. The elution order of TAGs was primarily governed by the hydrophobicity of the solutes. As the PN increases, the non-polar character of TAGs becomes more dominant.</p><h4><strong>Conclusions&nbsp;</strong></h4><p>The Nexera™ UC system provided excellent results for assessing TAGs composition in ten different vegetable oils examined in this study employing an SFC-PDA analytical method using isocratic mode and UV detection at 205 nm. This approach does not require any sample preparation and enables analyses to be completed with less waste and less cost compared to traditional methods, making it feasible for routine analyses, while providing reliable quantitative values.&nbsp;</p><p>Quantification of adulterated EVOO was performed by establishing curves based on peak areas of LLL marker versus seed oils concentrations. Statistical analysis using PCA and one-way ANOVA also visually distinguished adulterated EVOO from pure EVOO, and the result was in accordance with the present quantitative method. This fast and environmental method exhibits a huge potential for quality control and authenticity evaluation of EVOO.</p><h3><strong>3. Thermo Fisher Scientific / ASMS: Uncovering biological differences at scale: high-throughput and in-depth plasma proteomics with the Seer Proteograph ONE workflow and Orbitrap Astral Zoom Mass Spectrometer</strong></h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/po_393_uncovering_biological_astral_zoom_seer_po393_asms2025_na_en_f697aef9c0.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Plasma proteomics enables minimally invasive biomarker discovery by capturing disease-related molecular signatures. However, its effectiveness is limited by the wide dynamic range of protein concentrations. To address this, we combined the Seer Proteograph ONE workflow with the Orbitrap Astral Zoom mass spectrometer to enable a high-throughput, high-precision platform that delivers deep plasma profiling and actionable insights for large-scale clinical and translational research (Figure 1).</p><h4><strong>Methods:&nbsp;</strong></h4><p>The Seer Proteograph ONE workflow was used to prepare plasma samples from a small disease cohort with matched healthy controls to evaluate its performance and feasibility in detecting biologically meaningful differences. Samples were then separated and analyzed using the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/398"><strong>Thermo Scientific Vanquish Neo UHPLC system </strong></a>coupled to the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1959"><strong>Orbitrap Astral Zoom mass spectrometer</strong></a>, enabling deep and reproducible proteome coverage. Two analytical approaches—a high-throughput method and a Max-ID workflow—were tested to demonstrate the versatility and throughput for comprehensive biomarker discovery in clinical cohort studies.</p><h4><strong>Results:&nbsp;</strong></h4><p>The Seer Proteograph ONE workflow with Orbitrap Astral Zoom mass spectrometer demonstrated that both high-throughput and Max-ID workflow were able to detect differences in biology in diseased states from healthy controls. The high-throughput workflow enabled rapid, reproducible analysis, while the Max-ID approach delivered deeper proteome coverage. The synergy between the Seer Proteograph workflow and Orbitrap Astral Zoom mass spectrometer supports scalable, high-resolution biomarker discovery, making it suitable for large clinical studies and precision medicine applications.</p><h4><strong>Conclusions&nbsp;</strong><span><strong>&nbsp;</strong></span></h4><ul><li>The Seer Proteograph ONE workflow combined with Orbitrap Astral Zoom mass spectrometer identified &gt;10,800 protein groups using ultradeep profiling, compared to &gt;8,200 with the high-throughput method—demonstrating scalable, reproducible plasma proteomics with clear detection of biological differences for biomarker discovery.&nbsp;</li><li>The Protoeograph ONE workflow combined with the Orbitrap Astral Zoom Mass Spectrometer captures exceptional dynamic range of 7-8 orders of magnitude in plasma proteome&nbsp;</li><li>&gt;1,000 differentially abundant proteins detected with biologically relevant dysregulated pathways such as immune signaling or tissue remodeling underscores the complex biology of lung cancer&nbsp;</li><li>Identification of FDA markers as differentially expressed showcases the workflow’s strength for capturing biologically relevant plasma proteins</li></ul><h3><strong>4. Waters Corporation: Improving Throughput and Analytical Greenness in Pharmaceutical Discovery Using Ultrashort (2.1 x 10 mm) HPLC Columns</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/720009074_en_406ea811f9.pdf"><strong>Full PDF for download</strong></a></li></ul><h5><strong>Benefits&nbsp;</strong></h5><ul><li>Up to 60% decrease in analysis time using the ultrashort (2.1 x 10 mm) column</li><li>Lower AMGS metric values indicating improvements in analytical method greenness</li></ul><p>Drug discovery is a fast-paced, high-throughput environment where chemists screen large numbers of samples to determine if a suitable compound has been created. Supporting these efforts from an analytical standpoint using liquid chromatography (LC) or liquid chromatography-mass spectrometry (LC-MS) can present challenges. For many discovery workflows, hundreds if not thousands of samples are analyzed for the determination of drug concentrations in biological matrices, for structural confirmation or for an assessment of purity. Analytically speaking, this means that the number of samples that may be analyzed per unit time, or throughput, is valued more highly than is achieving baseline separation of all components. To maximize throughput, rapid (“ballistic”) gradients can be employed along with short analytical columns.1 Ballistic gradients are designed to run at the highest flow rate possible while using the steepest gradient slope, in terms of percent solvent per column volume (%/VC).2 This allows for the fastest elution off the column possible. Shorter columns are used not only to limit the pressure generated by the column, thereby allowing faster flow rates, but also to reduce the analysis time.&nbsp;</p><p>In this application note, the use of a 2.1 x 10 mm 2.5 µm XSelect™ HSS T3 Column is examined compared to 2.1 x 30 mm and 2.1 x 50 mm columns packed with the same stationary phase. These three columns were used to analyze a full 96-well QuanRecovery™ Plate to simulate the output of a drug discovery environment where multiple samples need to be run as fast as possible. Prior to sample analysis, instrument methods were created to increase throughput by limiting the inter-injection delay. The inter-injection delay time was calculated and recorded. The total analysis time for each column configuration was determined and compared, along with the AMGS. While the loss of efficiency in using a 10 mm column was expected, the shorter column configuration achieved adequate results for a single component sample. Coupling this column with mass spectrometry for peak identification would be sufficient for high-throughput discovery screening where separation quality is not the most important attribute of the analysis, but rather speed is of the highest value.3</p><h4><strong>Experimental</strong></h4><h5><strong>Reversed Phase LC Conditions&nbsp;</strong></h5><ul><li><strong>LC system: </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/191"><strong>ACQUITY™ Premier</strong></a> Binary Solvent Manager with Column Manager, TUV Detector, and<a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/554"><strong> Xevo™ TQ Absolute Mass Spectrometer</strong></a></li><li><strong>Columns:&nbsp;</strong><ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1864"><strong>XSelect HSS T3</strong></a>, 2.1 x 50 mm, 2.5 µm (p/n: 186006149)&nbsp;</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1864"><strong>XSelect HSS T3</strong></a>, 2.1 x 30 mm, 2.5 µm (p/n: 186006148)&nbsp;</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1864"><strong>XSelect HSS T3</strong></a>, 2.1 x 10 mm, 2.5 µm (p/n: 186011466)</li></ul></li><li><strong>Chromatography software:</strong> <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/635"><strong>MassLynx™ V4.1 Software</strong></a></li></ul><h4><strong>Results and Discussion&nbsp;</strong></h4><h5><strong>Instrument Considerations&nbsp;</strong></h5><p>Prior to sample analysis, the system being used was considered. For Waters™ LC systems, there are a few parameters in the inlet method that can be adjusted to speed up the time between injections, or inter-injection delay. This delay comes from the sequence of steps that the system takes to draw the sample and inject it into the flow path of the LC. The parameters that need adjustment are all located in the sample manager panel of the instrument method or inlet method. Figure 1 shows screenshots of the sample manager panel and where the mentioned parameters are located.</p><h4><strong>Conclusion&nbsp;</strong></h4><p>The use of high-throughput LC separations in pharmaceutical discovery allows new lead compounds to be selected quickly and efficiently. This may be achieved using short columns with ballistic gradients. To support these activities 2.1 x 10 mm columns were developed and used to analyze a full 96-well plate of samples. Comparing the results obtained on the 10 mm column to those produced using 30 and 50 mm columns showed a 57–146% higher throughput. Additionally, the use of the 10 mm column was determined to be substantially “greener” as measured by the analytical method greenness scores, with decreases of 40 and 68% relative to 30 and 50 mm length columns.</p>

News from LabRulezLCMS Library - Week 50, 2025

<p><strong>Our Library never stops expanding. What are the most recent contributions to LabRulezLCMS Library in the week of 2nd February 2026? Check out new documents from the field of liquid phase, especially HPLC and LC/MS techniques!</strong></p><blockquote><p><span style="font-size:20px;">👉 </span><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library"><span style="font-size:20px;"><strong>SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT LCMS AND RELATED TECHNIQUES</strong></span></a></p></blockquote><blockquote><p><strong>👉 Need info about different analytical techniques?</strong> Peek into <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library"><strong>LabRulezGCMS</strong></a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library"><strong>LabRulezICPMS</strong></a> libraries.</p></blockquote><p>This week we bring you application notes by <strong>Agilent Technologies </strong>and<strong> Waters Corporation, </strong>technical note by<strong> Shimadzu </strong>and poster by <strong>Thermo Fisher Scientific / MSACL!</strong></p><h3><strong>1. Agilent Technologies: Quantitative Separation of THC Isomers and Metabolites from Whole Blood</strong></h3><p><strong>Using Agilent Captiva Enhanced Matrix Removal (EMR) cartridges and LC/MS/MS</strong></p><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_thc_isomers_captiva_emr_lctq_5994_8664en_agilent_5eb50dc6f9.pdf"><strong>Full PDF for download</strong></a></li></ul><p>THC isomers (Δ8- and Δ9-THC, in particular) are psychoactive compounds of increasing interest in forensic toxicology, where accurate identification and quantification of these individual isomers and their respective metabolites are essential for legal and clinical assessments. However, an analytical challenge derives from their structural or empirical similarity and the presence of potential isobaric interferences.&nbsp;</p><p>Isobaric compounds are molecules that are empirically identical, share the same nominal mass, but differ in structure. In the context of THC analysis, CBD and exo-THC are notable isobaric interferences. These compounds can coelute or produce overlapping mass spectral signals, complicating the interpretation of results. CBD, a nonpsychoactive cannabinoid, shares an identical molecular weight and similar fragmentation pattern with THC isomers, making it difficult to distinguish using conventional mass spectrometry alone. Exo-THC, another structural analog, further adds to the complexity for the same reasons.&nbsp;</p><p>Without adequate chromatographic separation, these isobaric interferences can lead to false positives or inaccurate quantitation. This is particularly problematic in forensic settings, where precise identification of psychoactive substances is critical. Therefore, a robust analytical method that can resolve these compounds and potential interferents is&nbsp;desirable.&nbsp;</p><p>This study introduces a workflow that combines enhanced matrix removal (EMR) with LC/MS/MS to achieve baseline separation of THC isomers and their metabolites from the isobaric interferences that were examined within the scope of this application note. The method enables confident separation, identification, and quantification in a single 15-minute analysis.</p><h4><strong>Experimental</strong></h4><h5><strong>Chromatographic separation and LC/MS/MS detection&nbsp;</strong></h5><p>This procedure can be accomplished using different instrument configurations. Chromatographic separation was verified using both an <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=1260+Infinity+II+LC"><strong>Agilent 1260 Infinity II LC</strong></a> and an <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=1290+Infinity+II+LC"><strong>Agilent&nbsp;1290 Infinity II LC</strong></a>. Analyte detection and quantitation were performed via both an <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=6475"><strong>Agilent 6475 triple quadrupole LC/MS</strong></a> and an <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=Ultivo"><strong>Agilent&nbsp;Ultivo triple quadrupole LC/MS</strong></a>. Method&nbsp;parameters are detailed in Tables 1 and 2. Detailed MRM transition settings are outlined in Appendix A.</p><h4><strong>Conclusion&nbsp;</strong></h4><p>This study presents an effective, integrated workflow for the separation and quantification of THC isomers and metabolites in whole blood. Agilent&nbsp;Captiva EMR–Lipid cartridges removed sufficient matrix interferences to enable clean extraction and high analyte recovery. Chromatographic separation using an Agilent InfinityLab Poroshell 120 PFP column provided reliable resolution of isobaric compounds, including CBD and exo-THC. Coupled with Agilent LC/MS/MS systems featuring Agilent Jet Stream ionization technology, the method delivered consistent sensitivity and selectivity across a complex panel of analytes. Together, this methodology offers the basis of a streamlined workflow for the separation of Δ8-, Δ9-, and Δ10-THC isomers and their respective hydroxy and carboxy metabolites and potential interferents from whole blood.</p><h3><strong>2. Shimadzu: Optimization of Supercritical Fluid Extraction Parameters for Vitamins D2, D3, and K1 from Pharmaceutical Preparations</strong></h3><ul><li>Technical note</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/c190_e333_6198eb84b9.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Vitamins are organic compounds, essential in small amount, crucial for the normal functioning of the human body, facilitating numerous enzymatic and metabolic functions[1]. Since the human organism cannot produce vitamins, the diet represents the main route of ingestion of these compounds. As consumer awareness grows, reliable information about the vitamin content in foods is becoming a critical issue. However, considering that vitamins could be losses during food processing and storage, the readyto-use multi-vitamin pharmaceutical preparations are becoming widely employed among consumers. These facts, together with the introduction of labelling regulations, introduced the need for ensure the quality control of these types of formulation.</p><h4><strong>2. Experimental</strong></h4><h5><strong>2.3 Instrumentation</strong></h5><p>The supercritical fluid extraction (SFE) was carried out by using a SFE pretreatment system (<a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=1&amp;search=Nexera+UC"><strong>Shimadzu Nexera UC</strong></a>) equipped with: a CBM-40 controller, an SFE-30A module, an LC-30ADSF CO2 pump, an LC-40D XR modifier pump, an LC-40D make-up pump, an SFC-30A back pressure regulator, a DGU-40 on-line degasser, an FRC-40 fraction collector. A combination of static and dynamic extraction was employed (Figure 2).</p><h4><strong>Conclusion&nbsp;</strong></h4><p>Considering the obtained results, the vitamins extraction revealed as strictly matrix dependent, according to the formulation excipients. Therefore, detailed study needs to be performed to better understand the vitamin formulation.</p><h3><strong>3. Thermo Fisher Scientific / MSACL: Simultaneous quantitation and discovery (SQUAD) of fecal bile acids and their conjugates in children with autism spectrum disorder (ASD)</strong></h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/po_squad_fecal_bile_acids_children_asd_po_en_af787058d3.pdf"><strong>Full PDF for download</strong></a></li></ul><p>This study presents a <strong>Simultaneous Quantitation and Discovery (SQUAD)</strong> metabolomics workflow applied to the analysis of <strong>fecal bile acids and their microbial conjugates</strong> in children with <strong>Autism Spectrum Disorder (ASD)</strong> undergoing <strong>microbiota transfer therapy (MTT)</strong>. Bile acids play a key role in lipid metabolism and gut–brain signaling, and alterations in gut microbiota composition in ASD have been linked to disrupted bile acid metabolism. The SQUAD approach was designed to address the need for both <strong>targeted quantification</strong> of known bile acids and <strong>untargeted discovery</strong> of novel metabolic features within a single LC–MS injection.</p><p>The workflow integrates <strong>reversed-phase liquid chromatography</strong> with advanced mass spectrometry using a <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/748"><strong>Thermo Scientific Orbitrap Ascend Tribrid mass spectrometer</strong></a> coupled to a <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/744"><strong>Thermo Scientific Vanquish Horizon UHPLC system</strong></a>. Quantitative analysis was performed using <strong>parallel reaction monitoring (PRM)</strong> in the <strong>linear ion trap</strong>, while <strong>high-resolution MS¹ scanning in the Orbitrap</strong> enabled confident metabolite annotation. The Tribrid architecture—combining a quadrupole, linear ion trap, and Orbitrap—allowed high selectivity and sensitivity, including MSⁿ capabilities for resolving <strong>co-eluting structural isomers</strong> such as leucine- and isoleucine-conjugated bile acids.</p><p>Using calibrated bile acid standards, the method achieved <strong>absolute quantitation across six orders of magnitude</strong>, with limits of quantitation below <strong>1.8 femtomoles on column</strong>. The SQUAD workflow was applied to fecal samples collected before and after MTT, revealing <strong>distinct shifts in bile acid and lipid-related metabolite profiles</strong> following treatment. Multivariate analysis, including <strong>principal component analysis (PCA)</strong>, demonstrated clear separation between pre- and post-treatment samples in the MTT group, while no comparable changes were observed in placebo controls.</p><p>Overall, the results demonstrate that SQUAD metabolomics enables <strong>high-throughput, highly sensitive, and information-rich analysis</strong> by combining quantitative rigor with deep metabolic coverage in a single experiment. This integrated LC–MS workflow provides valuable insight into the biochemical effects of microbiome modulation in ASD and highlights the power of <strong>Orbitrap Tribrid–based metabolomics</strong> for studying complex host–microbiome interactions in clinical research.</p><h3><strong>4. Waters Corporation: Analysis of Organic Carbonates in Lithium- Ion Battery Electrolyte by High-Performance Liquid Chromatography (HPLC) with Mass Detection (MS)</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/720009211_en_46cbebda90.pdf"><strong>Full PDF for download</strong></a></li></ul><h5><strong>Benefits&nbsp;</strong></h5><ul><li>Sensitive method for low-level detection and quantification of carbonate solvents (0.05–1 ppm) and carbonate-based aging products (0.00075–0.0025 ppm) in lithium-ion battery electrolyte solutions using the ACQUITY QDa II Mass Detector with SIR acquisition mode.</li><li>Robust chromatographic separation using the XSelect Premier HSS PFP Column under 7 minutes analysis time, operated under reversed-phase conditions.</li></ul><p>The electrolyte is one of the main components in the lithium-ion battery.<sup>1,2</sup> It is a conductive solution that transports lithium ions from the cathode to the anode during the charging process. During discharge, the lithium ions flow from the anode to the cathode. The electrolyte solution is composed of lithium salt dissolved in a mixture of organic solvents.<sup>1,2</sup> The organic solvents are typically a mixture of cyclic and linear carbonates, including EC, PC, DMC, EMC, and DEC.<sup>2</sup> Lithium hexafluorophosphate (LiPF<sub>₆</sub>) is commonly used as the conducting lithium salt,<sup>2</sup> providing the necessary ionic conductivity for efficient battery operation.&nbsp;</p><p>The LiPF6 salt in carbonate-based systems can exhibit chemical and thermal instability, which can impact the performance of the lithium-ion batteries.<sup>2-4</sup> Electrolyte solutions can also degrade, forming aging products including DMDOHC and DEDOHC.<sup>2</sup> Various techniques are employed to investigate quality and properties of the electrolytes. Techniques such as scanning calorimetry (DSC) and thermogravimetric analysis (TGA) offer a comprehensive analysis of an electrolyte’s thermal properties, while rheology measures viscosity of the conductivity solutions.<sup>1</sup> Additionally, chromatographic methods are used to measure the quantity of carbonate solvents in electrolyte solutions.<sup>2-4</sup> Gas chromatography mass spectrometry (GC/MS) and liquid chromatography mass spectrometry (LC/MS) are common techniques used to investigate carbonate-based electrolytes.<sup>3</sup>&nbsp;</p><p>In this application note, an HPLC method with mass detection was developed for the analysis of five common carbonate solvents and two carbonate-based aging products (Table 1). The method employed an ACQUITY QDa II Mass Detector coupled with an Arc Premier System. Method performance characteristics including limit of detection (LOD), limit of quantification (LOQ), linearity and system suitability were demonstrated. Additionally, the developed method was applied for the analysis of LiPF<sub>6</sub><sup>-</sup>based electrolyte solution.</p><h4><strong>Experimental</strong></h4><h5><strong>Method Conditions&nbsp;</strong></h5><ul><li><strong>System: </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/306"><strong>Arc Premier System</strong></a>, Column Manager with active pre-heating, PDA and the ACQUITY QDa II Mass Detector&nbsp;</li><li><strong>Column: </strong>XSelect Premier HSS PFP Column, 2.5 µm, 4.6 mm x 100 mm (Waters, p/n: 186010051)</li><li><strong>MS system: </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1543"><strong>ACQUITY QDa II Mass Detector</strong></a></li></ul><h5><strong>Data Management&nbsp;</strong></h5><ul><li><strong>Chromatography data software (CDS): </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/627"><strong>Empower™ 3.6.1</strong></a></li></ul><h4><strong>Results and Discussion&nbsp;</strong></h4><p>Chromatographic columns with a wide range of selectivity were explored during this study to ensure separation between carbonate solvents and carbonate-based aging products. The selected columns (XSelect Premier CSH™ C18, XSelect Premier CSH Phenyl Hexyl, XSelect Premier HSS T3, XSelect Premier HSS PFP) were tested with acetonitrile and methanol solvents. The study showed that XSelect Premier HSS PFP Column with methanol provided the best retentivity and separation for all analytes (Figure 1). The method successfully separated carbonate solutions and carbonate-based aging products in less than a 7-minute gradient time. The MS total ion chromatogram (TIC) data was collected across the mass range of 35–300 Da using electrospray ionization in positive (ESI+) mode (Figure 1A). The mass spectral data facilitated quick and accurate identification of the components. The carbonate solvents formed [M + H]+ molecular ions, while the selected aging products formed sodium adducts, [M + Na]+. These ions were measured using a selected ion recording (SIR) acquisition mode, which determines intensity for a single ion of interest (Figure 1B).</p><h4><strong>Conclusion&nbsp;</strong></h4><p>A sensitive and reliable HPLC-MS method using the Arc Premier System coupled with the ACQUITY QDa II Mass Detector was developed for the analysis of carbonate solvents and carbonate-based aging products in lithium-ion battery electrolyte. This reversed-phase LC method successfully separated all five carbonate solvents (EC, PC, DMC, EMC, DEC) and two aging products (DMDOHC/DEDOHC) on an XSelect Premier HSS PFP Column. Low-level quantification limits were achieved using SIR acquisition mode ranging from 0.05 to 1 ppm and 0.00075–0.0025 ppm for carbonate solvents and aging products, respectively. The method was demonstrated to be applicable for the analysis of lithium-ion battery electrolyte.</p>

News from LabRulezLCMS Library - Week 06, 2026

Article

Product

Events

Webinars

Application

Academy

Video

Poster

Scientists

Plastics

Environment

Food

Water

Health

Presentation

Scientific article

Interview

Toxicology

Popularization

Science and research

Software

Covid-19

Career

Laboratories

Various

Zaměření

Type of News

Focus

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

News from LabRulezLCMS Library - Week 06, 2026

News from LabRulezLCMS Library - Week 50, 2025

Upcoming events

Understanding quantification algorithms

36th MassSpec Forum Vienna 2026

Analytical Strategies for Peptide & Protein Therapeutics

Webinars

High-throughput stability screening strategies for antibody formulation

Big Scale, Big Wins: Prep Chromatography Explained

PFAS in Food & Food Contact Material