<p><strong>Tasty beer starts with knowing what’s in your hops. Explore how online SPE makes bitter acid analysis in hops faster and more reliable.</strong></p><h4><strong>How can you detect bitter acid profiles quickly, reliably, and more sustainably?</strong></h4><p>For craft brewers and beer lovers alike, a refreshing experience is all about flavor.</p><p>So how can you achieve the desired bitterness in your beer? The answer is not just about the recipe. Finding the right flavor profile starts with the bitter acids present in the starting hops material.</p><div><div><p>Hops (the heart of your favorite beer) are the source of the brew’s distinctive flavor tied to bitterness and aroma.</p><p>At the molecular level, bitterness is driven by <a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0308814622016338">α- and β-bitter acids</a>, like humulones and lupulones, whose concentrations determine the final sensory profile of the beer (<strong>Figure 1</strong>).</p><p>Accurately characterizing these compounds in each batch allows brewers to unlock the full potential of every variety of hops.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Fisher_Scientific_How_Bitter_Acid_Analysis_Helps_Brewers_Better_Control_Beer_Flavors_2_6435757c03.jpeg" alt="Thermo Fisher Scientific: How Bitter Acid Analysis Helps Brewers Better Control Beer Flavors: Figure 1. General chemical structure of hop bitter acids." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Fisher_Scientific_How_Bitter_Acid_Analysis_Helps_Brewers_Better_Control_Beer_Flavors_2_6435757c03.jpeg 222w," sizes="100vw" width="700" height="493"></p><p>While conventional analytical methods rely on long, manual sample preparation steps and hazardous solvents, laboratories now strive for greener and more efficient workflows.</p><p>And moving from manual to online sample preparation is one of the easiest ways your lab can reduce waste and — most importantly — improve reliability with automation.</p><h4><strong>Key takeaways</strong></h4><ul><li>Online SPE reduces hands-on work, shortens turnaround time, and supports more sustainable methods by cutting solvent use and eliminating single-use cartridges.</li><li>Automated UHPLC workflows are easier for new users to execute, offering more reproducible quantifications of α- and β-bitter acids in hops.</li><li>Accurate bitter acid profiles help brewers distinguish hop varieties and control flavor with confidence.</li></ul><h4><strong>Comparing offline vs. online solid phase extraction for bitter acid HPLC analysis</strong></h4><p>If you’ve spent long hours in the lab preparing samples for hops analysis, you’re not alone.</p><p>Manual sample preparation often takes the most time in hops analysis, an area where online <a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/content/lifetech/global/en/home/industrial/chromatography/chromatography-learning-center/chromatography-consumables/sample-prep.html">solid phase extraction</a> (SPE) can make a real difference. Here’s why.</p><p>Manual SPE has a lot of manual steps. Extraction. Cartridge loading. Washing. Elution. And sometimes solvent exchange or reduction. All before your actual analysis begins. This labor-intensive workflow can take up to an hour and depends strongly on operator skillsets, making reproducibility a challenge for new hires.</p><h4><strong>Online SPE analysis provides key benefits like:</strong></h4><ul><li>Hands-off workflow free of cartridges, manifolds, or vacuum steps.</li><li>Column washing and re-equilibration occur in parallel with separation.</li><li>SPE step is complete in just two minutes.</li><li>Minimizes operator-dependent variability.</li><li>Uses less than 8 mL of solvent.</li></ul><p>Let’s explore what this technique looks like in practice.</p><h4><strong>Online SPE for analyzing α- and β-bitter acids in hops standard solutions.</strong></h4><p>Changing your sample preparation from manual to automated isn’t complicated. With the right tools you can fully integrate online SPE with your UHPLC system (<strong>Figure 2</strong>).</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Fisher_Scientific_How_Bitter_Acid_Analysis_Helps_Brewers_Better_Control_Beer_Flavors_3_4fb14243b4.jpeg" alt="Thermo Fisher Scientific: How Bitter Acid Analysis Helps Brewers Better Control Beer Flavors: Figure 2. Schematic workflow for the determination of bitter acids in hops. The process involves clean up and instrumental analysis using the Thermo Scientific Vanquish Online SPE UHPLC System." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Fisher_Scientific_How_Bitter_Acid_Analysis_Helps_Brewers_Better_Control_Beer_Flavors_3_4fb14243b4.jpeg 245w," sizes="100vw" width="700" height="323"></p><h4><strong>The process for analyzing a hops standard solution is straightforward:</strong></h4><ol><li>First, extract hop samples with ethanol (a greener alternative to toluene or diethyl ether in conventional methods).</li><li>Inject the extract directly into your instrument for analysis. Bitter acids retain<a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1970"><strong> on the SPE column</strong></a> while matrix interferences that can comprise quantitation are removed.</li><li>Next, backflush the SPE column to transfer the analytes to the<a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/423"><strong> analytical column </strong></a>for separation. While this separation is taking place, the SPE column is washed and re-equilibrated in parallel, keeping the total run time to 15 minutes, with the separation of all six major bitter acids in a single analysis (<strong>Figure 3</strong>).</li></ol><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Fisher_Scientific_How_Bitter_Acid_Analysis_Helps_Brewers_Better_Control_Beer_Flavors_4_1e47405e3c.jpeg" alt="Thermo Fisher Scientific: How Bitter Acid Analysis Helps Brewers Better Control Beer Flavors: Figure 3. UV chromatogram of hop bitter acids in standard solution (1-cohumulone, 2-humulone, 3-adhumulone, 4-colupulone, 5-lupulone, 6-adlupulone)." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Fisher_Scientific_How_Bitter_Acid_Analysis_Helps_Brewers_Better_Control_Beer_Flavors_4_1e47405e3c.jpeg 245w," sizes="100vw" width="700" height="347"></p><h4><strong>Online SPE for analyzing α- and β-bitter acids in real hops samples</strong></h4><p>Analytical labs need methods that are accurate and reliable for brewers to develop distinct and reproducible flavor profiles across batches.</p><p>To assess the applicability of online SPE UHPLC methods for hops analysis, we analyzed bitter acid profiles from four species — Sultana, Barbe Rouge, Azacca, and Sabro.</p><p>The concentration of α-acids dominated all samples, while each hops species exhibited distinct profiles in terms of α-acid and β-acid content, making them suitable for different brewing strategies (<strong>Figure 4</strong>).</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Fisher_Scientific_How_Bitter_Acid_Analysis_Helps_Brewers_Better_Control_Beer_Flavors_5_3a179217db.jpeg" alt="Thermo Fisher Scientific: How Bitter Acid Analysis Helps Brewers Better Control Beer Flavors: Figure 4. Bitter acid profiles in four different hop species, error bars display SD (n=6). To check method consistency, we measured each hops extract six times. Variation between measurements was low, with relative standard deviation below 3.5 % across all hops species." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Fisher_Scientific_How_Bitter_Acid_Analysis_Helps_Brewers_Better_Control_Beer_Flavors_5_3a179217db.jpeg 245w," sizes="100vw" width="700" height="410"></p><ul><li>For testing labs, this process translates into a workflow that is easy to run, fast, and delivers reliable results without added complexity.</li><li>For craft brewers, reliability means clear, trustworthy insights into hops bitter acid profiles, for better hop selection and more precise control of bitterness and flavor in your beer.</li></ul><h4><strong>From carefully procured samples to tasty sips</strong></h4><p>Efficient UHPLC workflows support faster results, less solvent use, and reliable bitterness data for brewers. And online SPE turns those advantages into practical, day-to-day benefits for brewers and labs alike.</p><ul><li>Less hands-on skills required for lab analysts</li><li>Faster results from labs to brewers</li><li>A more sustainable way to work</li><li>Clear insights into hops flavor</li></ul><p>To learn more about the method and see the full application data, <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/cn_004238_hplc_vanquish_online_spe_bitter_acids_hops_cn004238_na_en_587a5d300b.pdf"><strong>check out our application note today</strong></a>.</p><h4><strong>FAQs</strong></h4><div><div><h5><strong>What are the key compounds in hops analyzed by HPLC?</strong></h5><p>Bitter acids, namely α-acids and β-acids, especially the six major bitter acids (humulones and lupulones) that define hop bitterness and are required for quality control and brewing decisions.</p></div><div><h5><strong>What column types are recommended for hop acid separations?</strong></h5><p>Classical C18 Silica columns are ideal for bitter acids separation. UHPLC compatible columns with particle size ≤ 2 µm boost analysis with higher flow rate, thus shorter analysis time and solvent consumption.</p></div><div><h5><strong>What’s the best workflow for hops analysis?</strong></h5><p>A typical workflow for hop analysis consists of three main steps: extraction of the target compounds, clean-up of co-extracted matrix components, and instrumental analysis by HPLC or UHPLC. To keep this workflow efficient and reproducible, you should minimize manual handling and add in automation when possible. Integrating online SPE into your LC instrument allows sample clean-up to run automatically, reducing hands-on time, solvent use, and variability while delivering faster, more reliable results.</p></div></div><blockquote><p><strong>Visit us on&nbsp;</strong><a target="_blank" rel="noopener noreferrer" href="https://www.linkedin.com/showcase/72003132/admin/dashboard/"><strong><u>LinkedIn:</u></strong></a>&nbsp;#UHPLC #Automation</p></blockquote></div></div>

How Bitter Acid Analysis Helps Brewers Better Control Beer Flavors

<p><strong>In the week of June 29, the following webinars await you in the field of liquid phase and especially HPLC and LC/MS.</strong></p><blockquote><h4><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinars"><strong>👉 DETAILS AND REGISTRATION IN THE WEBINARS SECTION</strong></a></h4><p><strong>👉 Search and filter in the largest global database</strong> with over <strong>5 500 GC, LC, MS and spectroscopy webinars</strong>.</p></blockquote><h5><strong>1. Thermo Fisher Scientific: Insights from an IC specialist: To be suppressed or not suppressed?</strong></h5><ul><li>Tu, 30.6.2026 09:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/6310">Registration</a></li></ul><p>Join Thermo Fisher’s Ask the Experts session to learn how suppressor technology impacts ion chromatography performance, sensitivity, reliability, maintenance, and troubleshooting.</p><h5><strong>2. SCIEX: Advancing Proteomics with ZenoTOF: From Single-Cell Analysis to Plasma Biomarker Discovery</strong></h5><ul><li>Tu, 30.6.2026 11:30 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/6311">Registration</a></li></ul><p>Discover how ZenoTOF high-resolution mass spectrometry is accelerating single-cell proteomics and plasma biomarker discovery through enhanced sensitivity, throughput, and automation.</p><h5><strong>3. Agilent Technologies: Measuring Diverse Samples with UV/VIS Spectrometers and Integrating Spheres</strong></h5><ul><li>Tu, 30.6.2026 20:30 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/6052">Registration</a></li></ul><p>This webinar will discuss diffuse transmission and reflection UV/VIS measurements, including how to perform measurements with Agilent’s Cary 60 UV/VIS Spectrometer.</p><h5><strong>4. Waters Corporation: Informatics series #33 Tips, Tricks and Best Practices</strong></h5><ul><li>Th, 2.7.2026 11:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/6315">Registration</a></li></ul><p>This interactive session revisits essential features, shortcuts, and practical techniques in Empower software that can streamline everyday laboratory work and reduce unnecessary effort.</p><h5><strong>5. Waters Corporation: Unlocking Therapeutic Peptide Characterisation (GLP-1RAs) with Cyclic IMS</strong></h5><ul><li>Th, 2.7.2026 15:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/6313">Registration</a></li></ul><p>Discover how cyclic ion mobility spectrometry (cyclic IMS) improves characterization of GLP-1 analogues and therapeutic peptides, supporting development, quality control, and regulatory submissions.</p><h5><strong>6. Agilent Technologies: Spectral Flow Cytometry Masterclass - Session 1</strong></h5><ul><li>Fr, 3.7.2026 07:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/6316">Registration</a></li></ul><p>Learn how full-spectrum flow cytometry enables high-dimensional cell analysis. Explore spectral flow technology, experimental design, and applications in immunology, oncology, and vaccine research.</p>

Webinars LabRulezLCMS Week 27/2026

<p><strong>The international standard ISO/IEC 17025 [1] clause 7.7.2 with regards to ensuring the validity of results, requires a laboratory to participate in proficiency testing (PT) and/or to participate in interlaboratory comparisons (ILCs) other than PT. However, no guidance as to what these other ILCs might be, or indeed how they might compare in relation to PT, is provided. This leaflet aims to outline other ILCs available, pointing out some of the limitations as compared to PT.&nbsp;</strong></p><p>There are three major types of ILCs in which a group of laboratories analyses identical portions from a homogeneous, stable test sample, with each type being characterized by its intended purpose [2,3]:</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_Interlaboratory_comparisons_other_than_proficiency_testing_2_d9263807fb.jpg" alt="Eurachem: Interlaboratory comparisons other than proficiency testing" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_Interlaboratory_comparisons_other_than_proficiency_testing_2_d9263807fb.jpg 245w," sizes="100vw" width="1507" height="607"></p><p>A key point is that PT is an ILC that is designed to specifically evaluate the performance of participants, providing them with an infrastructure to monitor and assess the validity of their results. This is not the key purpose of the two other ILCs, and thus depending on their intended purpose they have a number of limitations that laboratories need to be aware of when using them rather than PT. Only proficiency testing should have been conducted in full compliance to the competency standard ISO/IEC 17043 [4].&nbsp;</p><h4><strong>Evaluation of measurement procedure performance&nbsp;</strong></h4><p>These ILCs, are designed to assess how a particular measurement procedure performs and whether it is fit for its intended purpose. These ILCs are often referred to as a ‘method performance study’ or a ‘collaborative study’ [2]. Some limitations of using such ILCs for monitoring laboratory performance as an alternative to PT are:&nbsp;</p><ul><li>All participants use the same measurement procedure i.e. the measurement procedure that is being validated. Unless the measurement procedure is being routinely used by the participating laboratory such an ILC will not assess the routine performance of the laboratory using their own routine measurement procedure. Nor does it enable them to compare their performance with other laboratories using alternative measurement procedures.&nbsp;</li><li>The measurement procedure is likely to be new, so participants may not have established stable procedures and quality control, so performance may not reflect routine use.&nbsp;</li><li>The report from such an ILC would not provide information on the performance of the participant, if the statistical model used makes the assumption that all laboratories perform with equal variability.</li><li>The design of the study may require the participants to assess multiple samples and/or to undertake multiple replicate analysis on the test materials. This may not be representative of the routine measurements or tests undertaken by the laboratory.&nbsp;</li><li>The conclusion of the ILC might be that the measurement procedure being assessed is not valid.&nbsp;</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_Interlaboratory_comparisons_other_than_proficiency_testing_3_a53ecd2f5d.jpg" alt="Eurachem: Interlaboratory comparisons other than proficiency testing" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_Interlaboratory_comparisons_other_than_proficiency_testing_3_a53ecd2f5d.jpg 157w," sizes="100vw" width="570" height="566"></p><h4><strong>Characterisation of candidate reference materials&nbsp;</strong></h4><p>These are ILCs that assign a property value to a candidate reference material, usually with a stated measurement uncertainty. These are often referred to as a ‘material certification study’ [2]. Limitations of using such ILCs as an alternative to PT are:&nbsp;</p><ul><li>The analysis of the candidate reference material is likely to require additional care in exercising the routine measurement procedure, such as substantially more replication, and/or may require quite different reporting formats (e.g. all valid replicates instead of a mean result). Thus, such an ILC will not necessarily provide an evaluation of the performance of the laboratory based on the routine use of their measurement procedures.&nbsp;</li><li>The report from such an ILC may include the results from the participating laboratories but would not provide information on the performance of each laboratory.&nbsp;</li><li>Participating laboratories may be required to assess multiple samples and/or to undertake multiple replicate analysis on the candidate reference materials. Thus this may not be representative of the routine measurements or tests undertaken by the laboratory.&nbsp;</li></ul><h4><strong>Other ILCs&nbsp;</strong></h4><p>Some other ILCs, whilst not being conducted in full compliance of the requirements of ISO/IEC 17043, may be designed to evaluate participant performance. These would include small ILCs as defined by EA‑2/21 [5] or split sample ILCs i.e. where a portion of a single sample is sent to two or three laboratories. Whilst these ILCs are specifically designed to evaluate participant performance, they may not provide a comprehensive comparison that a PT might provide. In such cases the laboratory needs to evaluate carefully the competence of the organization managing the ILC and the suitability of the service externally provided (ISO/IEC 17025 clause 6.6).</p>

Interlaboratory comparisons other than proficiency testing

Article

Webinars

Academy

A unique company dedicated to serving science helping our customers drive productivity and accelerate results. Through our premier brands – Thermo Scientific, Applied Biosystems, Invitrogen, Fisher Scientific and Unity Lab Services.

Thermo Fisher Scientific

Eurachem is a European network promoting international traceability of chemical measurements and good analytical practice. It provides expert guidance, supports method validation, uncertainty evaluation, proficiency testing, and facilitates discussion on technical and policy issues in analytical quality.

Eurachem

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Watrex BioWorks WorkBeads resins and GoBio Mini columns

Watrex Praha is the official distributor of Bio-Works, a leading global manufacturer of chromatographic resins designed for the purification of biopharmaceuticals.

<p><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>Watrex Praha</strong></a> is the official distributor of Bio-Works, a leading global manufacturer of chromatographic resins designed for the purification of biopharmaceuticals. This partnership brings high-quality products to the Czech market, widely used in biotechnology and the pharmaceutical industry.</p><p>The main product of Bio-Works is <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>WorkBeads </strong></a>resins, manufactured using a patented agarosebased method. These resins are characterized by excellent mechanical stability, uniform bead size distribution, and high separation efficiency. They are available both as loose resins and in prepacked columns, making them easy to use in various applications.</p><p>For efficient small-scale purification and process development screening, <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>GoBio Mini</strong></a> columns are the ideal solution. These prepacked columns are available in 1 ml and 5 ml sizes, facilitating quick and effective biomolecule separations.</p><p>Bio-Works products are used in bioprocess solutions focused on the purification and analysis of biomolecules, including monoclonal antibodies, proteins, peptides, oligonucleotides, viruses, and vaccines. These technologies offer top-tier quality and precision, ensuring optimal capacity and product purity.</p><h3><strong>Types of sorbents:</strong></h3><h4><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/affinity-chromatography/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>Affinity chromatography resins</strong></a></h4><p><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/affinity-chromatography/affinity-sorbents/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>WorkBeads™ affimAb</strong></a> is an optimized alkali-stable protein A resin designed for purification of monoclonal- and polyclonal antibodies in laboratory to process scale. This resin has a superior base matrix combined with a patented, alkali-stable protein A ligand, which results in high dynamic binding capacity at short residence times. This resin binds over 40 mg IgG/mL resin also at as short residence time as 2.5 min. Available also in prepacked 1 mL and 5 mL <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/affinity-chromatography/affinity-columns/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>GoBio™ Mini </strong></a>columns.</p><h4><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/ion-exchange-chromatography/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>Ion exchange chromatography (IEX) resins</strong></a></h4><p><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/ion-exchange-chromatography/iex-sorbents/"><strong>WorkBeads™ resins for ion exchange chromatography</strong></a> are designed for research and industrial scale purification of proteins, peptides and oligonucleotides by utilizing the difference in their surface charge. These resins demonstrate high-resolution separation while giving low backpressure to facilitate both capture and polishing purification applications in standard bioprocess columns.</p><ul><li><strong>WorkBeads 100S</strong> is a strong cation exchanger and will bind positively charged substances.</li><li><strong>WorkBeads 100Q</strong> is a strong anion exchanger and will bind negatively charged substances.</li><li><strong>WorkBeads 40S</strong> is a strong cation exchanger with sulfonate ligands and will bind positively<br>charged substances.&nbsp;</li><li><strong>WorkBeads 40Q</strong> is a strong anion exchanger with quaternary amine and will bind negatively charged substances.&nbsp;</li><li><strong>WorkBeads 40 DEAE</strong> is a weak anion exchanger with tertiary amine ligands (diethylaminoethyl) and is an alternative to WorkBeads 40Q when looking for alternative selectivities.</li></ul><p>Also available in pre-filled <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/ion-exchange-chromatography/iex-columns/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>GoBio™ Mini.</strong></a></p><h4><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/gel-filtration-sec/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>Size exclusion chromatography (SEC) resins</strong></a></h4><p><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/gel-filtration-sec/sec-sorbents/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>WorkBeads™ 40/100 SEC, WorkBeads 40/1000 SEC, WorkBeads 40/10 000 SEC, and</strong></a><br><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/gel-filtration-sec/sec-sorbents/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>WorkBeads Macro SEC resins</strong></a> are used for preparative size exclusion chromatography (SEC) in laboratory and process scale purification of proteins, viruses, and other biomolecules by utilizing the differences in their size. These resins are based on agarose, which is a biopolymer suitable for separation of biomolecules. WorkBeads resins are cross-linked using a proprietary method that results in a very rigid structure. Although the general recommendation for SEC is to use a low flow rate for best purification, the rigidity and tight particle size distribution allow for the purification of viruses and other large substances at a high flow rate for fast processing and high yields.</p><p>Produced using a proprietary cross-linking method that results in highly porous and physically stable matrices.</p><p>We have recently added two new Size Exclusion Chromatography (SEC) products that expand the range for more choice and flexibility in separating large particles. WorkBeads 200 SEC, with 180 μm beads, is suitable for viscous samples like serum and whole blood. WorkBeads Macro SEC resins extend the range of several resins with a bead size of 45 μm but different porosities, making it easy to change between them when different fractionation ranges are desired.</p><p><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/gel-filtration-sec/sec-sorbents/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>WorkBeads Dsalt resin</strong></a> is designed to enable quick and easy separations of high- and lowmolecular-weight substances. This resin is pre-swollen and enables efficient desalting and buffer exchange of proteins, large peptides, and nucleic acids.</p><p>Also available in pre-filled <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/gel-filtration-sec/sec-columns/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>GoBio™ Mini</strong></a>.</p><h4><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/hic-chromatography/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>Hydrophobic interaction chromatography (HIC) resins</strong></a></h4><p><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/hic-chromatography/hic-sorbents/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>WorkBeads™ 40 Butyl SH</strong></a> is a resin for hydrophobic interaction chromatography (HIC) designed for research and industrial scale purification of proteins, peptides, plasmids, and oligonucleotides by utilizing the difference in their surface hydrophobicity. It’s often used to complement other techniques that separate according to either charge or size.</p><p>The functional ligand of WorkBeads 40 Butyl SH is n-butyl thioether. Since butyl is a very<br>hydrophobic linear chain, minimal mixed-mode interactions are expected. The resin is optimized to offer reliable binding performance. The property of high-resolution separation, in combination with low backpressure, allows both capture and polishing purification applications in standard bioprocess columns. The resin is also available in several different ready-to-use prepacked column sizes, such as <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/hic-chromatography/hic-columns/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>GoBio™ Mini</strong></a> 1 mL and 5 mL, GoBio Screen 7 x 100 (3.8 mL), GoBio Prep 16 x 100 (20 mL) and 26 x 100 (53 mL) as well as GoBio Prod columns starting at 1 L. 5.&nbsp;</p><h4><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/imac-chromatography/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>Immobilized metal-ion affinity chromatography (IMAC) resins&nbsp;</strong></a></h4><p>There are three different chelating ligands that <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/imac-chromatography/imac-sorbents/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>WorkBeads IMAC resins</strong></a> are based on. First are WorkBeads IDA (iminodiacetic acid) and WorkBeads NTA (nitrilotriacetic acid), which can be charged or are pre-charged with four different metals (Ni2+, Co2+, Cu2+, and Zn2+). Different combinations of ligands and metals give unique selectivities. Pre-charged IDA and NTA-based IMAC resins can be stripped, cleaned, and recharged with fresh metal ions.&nbsp;</p><p>The third resin is WorkBeads NiMAC, a nickel pre-charged resin with very low nickel leakage and tolerant against chelating agents (EDTA) and reducing substances (DTT). This resin is optimal for the purification of, e.g. eukarytic cell feeds, which often containing these substances.</p><p>For optimization, an initial screening is recommended with the different WorkBeads IMAC resins to identify the optimal combination of ligand and metal ion.</p><p>Also available in pre-filled <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/imac-chromatography/imac-columns/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>GoBio™ Mini.</strong></a></p><h4><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/activated-resins/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>Activated resins</strong></a></h4><p>Pre-activated resin enables successful, convenient immobilization of ligands without the need for complex syntheses or special equipment. We have developed two different pre-activated resins where the bromohydrin active group reacts with thiol, amino and hydroxyl groups of the substance to be coupled. Two different resin porosities are available to facilitate optimized coupling of ligands of different sizes, or to optimize the prepared affinity resin for target molecules of different sizes.</p><p><strong>Resin for coupling your own ligands:</strong></p><ul><li>Made from agarose, well established and well-known in the Biotechnology industry</li><li>Simple coupling procedures at ambient temperature</li><li>Stable at ambient temperature in aqueous solution and at neutral pH</li><li>Suitable for coupling of ligands containing sulphydryl, amino- or hydroxy group</li></ul><p>Available as <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/activated-resins/activated-sorbents/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>WorkBeadsTM sorbents</strong></a><strong> </strong>or in pre-filled <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/activated-resins/activated-columns/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>GoBio™ Mini</strong></a>.</p><p>For more information or a non-binding quote regarding BioWorks products, please contact us at <strong>watrex@watrex.com</strong> or visit our website <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>www.watrex.com</strong></a></p>

Products from category SPE sample preparation distributed by WATREX Prague - page 1

Related content

How Bitter Acid Analysis Helps Brewers Better Control Beer Flavors

Interlaboratory comparisons other than proficiency testing

Webinars LabRulezLCMS Week 27/2026