Meeting EU Drinking Water Standards: The Critical Role of Sample Prep in Trace Contaminant Analysis

<p><strong>Although modern agriculture needs to be based on accurate real-time data on soil, plant, and environmental conditions, affordable, sufficiently sensitive, and robust monitoring devices for this purpose are currently missing. According to scientists, low-cost sensors based on new smart materials and printing technologies offer a suitable solution. The results of multidisciplinary research thus far and proposals for the development of these devices have been presented by researchers from Czechia, Great Britain, Spain, and the USA in a review article in the prestigious journal </strong><a target="_blank" rel="noopener noreferrer" href="https://www.nature.com/articles/s41467-026-68778-6#Abs1"><i><strong>Nature Communications</strong></i></a><strong>.</strong></p><p>“<i>Sensor technologies for monitoring plant health are still in their infancy. Only simple sensors capable of monitoring basic parameters such as pH, soil moisture, or temperature are commonly available on the market. However, if farmers are to face current challenges, including climate change, and ensure sufficient food for humanity, they need much more effective tools that will enable them to monitor, for example, various pathogens, including bacteria and fungi. In our opinion, a suitable solution is a combination of new smart materials and printing for the production of inexpensive, durable, and scalable materials</i>,” said the article’s first author, <strong>David Panáček</strong> from CATRIN, who worked on the study during his internship at Imperial College London.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/CATRIN_Soucasne_senzory_nestaci_Vedci_navrhuji_novou_cestu_ke_sledovani_zdravi_rostlin_b4014952a3.jpg" alt="CATRIN: David Panáček" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_CATRIN_Soucasne_senzory_nestaci_Vedci_navrhuji_novou_cestu_ke_sledovani_zdravi_rostlin_b4014952a3.jpg 208w," sizes="100vw" width="1536" height="1152"></p><p>Sensors for monitoring plant health, for example, lag behind similar devices used in human medicine. According to the authors, advances in materials science, which will enable the development of scalable sensor technologies, play a key role in this potential shift. “<i>Printing techniques, including inkjet printing, screen printing, aerosol printing, 3D printing, and direct laser writing, offer flexible ways to produce flexible sensors, large-area sensors, and sensors integrated directly into plants. The review article summarizes recent advances in printable low-dimensional materials for agricultural sensors, analyzes their physico-chemical properties in relation to sensor performance, and discusses key challenges and future opportunities requiring interdisciplinary integration</i>,” said one of the corresponding authors, <strong>Michal Otyepka</strong>.</p><p>The research brought together materials scientists, chemists, biologists, sensing experts, and printing technology specialists. Materials research and the use of graphene-based smart materials were led by scientists from CATRIN at Palacký University and VŠB-Technical University of Ostrava. Plant biologists from CATRIN contributed their knowledge of plant development, their responses to stress conditions, and the monitoring of their properties. Researchers from Imperial College London took care of the electronics, while representatives from<a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/companies/36"><strong> CEITEC – VUT</strong></a> focused on printing technologies. The team also included leading experts in sensing from the Catalan Institute of Nanoscience and Nanotechnology in Barcelona, and Joseph Wang of the University of California San Diego, the “father of sensing and electrochemistry,” also contributed his extensive knowledge.</p><p>“<i>This is a groundbreaking study on this topic, which has managed to attract some truly big names in their respective fields. Last but not least, the study demonstrates that interdisciplinarity at CATRIN gives rise to completely new and promising research topics, such as plant sensing and its use for studying plant-environment interactions and smart agriculture,</i>” added another corresponding author, <strong>Nuria De Diego</strong>.</p>

Current sensors are not good enough. Scientists propose a new way to monitor plant health

<p><strong>In this episode of the Concentrating on Chromatography podcast, host David Oliva interviews Ainslie Chen about her cutting-edge research on hemoglobin variant testing using liquid chromatography-high resolution mass spectrometry (LC-HR-MS). Ainslie discusses her novel method for separating and identifying hemoglobin subunits with mass shifts less than 1 Da, overcoming critical limitations in conventional clinical assays.</strong></p><p>Hear firsthand how her team developed an LC-HR-MS workflow using a C4 reversed-phase column, tackled technical challenges (including why C18 columns fell short), and achieved unprecedented sensitivity for variant detection in both adult and neonatal samples. The conversation touches on the potential of mass spectrometry to revolutionize clinical diagnostics, the importance of reproducibility, barriers to adoption in routine labs, and how teamwork drives scientific innovation.</p><p>Perfect for analytical chemists, clinical laboratorians, and anyone interested in the future of protein variant analysis, this episode also features Ainslie’s advice for early-career scientists and insights from her first ACS poster presentation.</p><h4><strong>Key Highlights:</strong></h4><ul><li>Motivation behind improving hemoglobinopathy testing &nbsp;</li><li>Technical advantages of LC-HR-MS over gene sequencing and CE &nbsp;</li><li>The crucial role of the C4 column in resolving challenging samples &nbsp;</li><li>Critical parameters for reproducible LC-HR-MS workflows &nbsp;</li><li>Barriers and outlook for clinical adoption of advanced mass spectrometry &nbsp;</li><li>The value of teamwork and mentorship in scientific research &nbsp;</li><li>Direct insights from recent ACS conference experiences</li></ul><h3><strong>Video transcription</strong></h3><p>In this interview, <strong>Ainslie Chen</strong> discusses her research on improving the detection and identification of hemoglobin variants using <strong>liquid chromatography coupled with high-resolution mass spectrometry (LC-HRMS)</strong>. The work addresses limitations of conventional hemoglobinopathy testing, which often struggles to resolve very small mass differences between closely related hemoglobin subunits. Because even a single amino-acid substitution can significantly alter hemoglobin structure and function, high analytical resolution is essential for accurate diagnosis of conditions such as anemia and sickle cell disease.</p><p>Chen explains why her team selected LC-HRMS over established clinical techniques like <strong>capillary electrophoresis</strong> and <strong>gene sequencing</strong>. While sequencing offers excellent accuracy, it is time-consuming, costly, and requires extensive sample preparation, making it impractical for routine clinical workflows. Capillary electrophoresis enables subunit separation but lacks the resolving power needed to distinguish variants differing by less than one Dalton. In contrast, high-resolution mass spectrometry provides both structural specificity and sensitivity, enabling confident identification of subtle hemoglobin variants with minimal sample preparation.</p><p>A key methodological insight from the project was the use of a <strong>C4 reversed-phase LC column</strong> instead of the more common C18 column. Chen describes how the shorter carbon chain and larger pore size of C4 columns improved protein elution and reduced denaturation, leading to more reproducible separations. Critical parameters for reproducibility included consistent mobile-phase composition (0.1% formic acid in water and acetonitrile), controlled temperature (60 °C for LC, ~320 °C capillary temperature), and stable chromatographic conditions.</p><p>Beyond hemoglobin analysis, Chen highlights the broader potential of high-resolution mass spectrometry in <strong>proteoform analysis</strong> and clinical diagnostics, including emerging applications in cancer detection. She acknowledges current barriers to clinical adoption—such as energy demands and instrument infrastructure—but points to advances like <strong>miniaturized mass spectrometers</strong> as promising steps toward wider use. The interview concludes with advice for young scientists: don’t hesitate to reach out to mentors, embrace collaboration, and view analytical chemistry as a versatile tool that bridges medicine, biology, environmental science, and beyond.</p><blockquote><p><strong>This text has been automatically transcribed from a video presentation using AI technology. It may contain inaccuracies and is not guaranteed to be 100% correct.</strong></p></blockquote><blockquote><h4><strong>Concentrating on Chromatography Podcast</strong></h4><p>Dive into the frontiers of chromatography, mass spectrometry, and sample preparation with host David Oliva. Each episode features candid conversations with leading researchers, industry innovators, and passionate scientists who are shaping the future of analytical chemistry. From decoding PFAS detection challenges to exploring the latest in AI-assisted liquid chromatography, this show uncovers practical workflows, sustainability breakthroughs, and the real-world impact of separation science. Whether you’re a chromatographer, lab professional, or researcher you'll discover inspiring content!</p><p>You can find <strong>Concentrating on Chromatography Podcast </strong>in podcast apps:</p><ul><li><a target="_blank" rel="noopener noreferrer" href="https://open.spotify.com/show/1wZg67rCjoGju4yhqxI3tL"><strong>Spotify</strong></a></li><li><a target="_blank" rel="noopener noreferrer" href="https://podcasts.apple.com/tz/podcast/concentrating-on-chromatography/id1788429185"><strong>Apple podcast</strong></a></li><li><a target="_blank" rel="noopener noreferrer" href="https://podscan.fm/podcasts/concentrating-on-chromatography"><strong>podscan</strong></a></li></ul><p>and on <a target="_blank" rel="noopener noreferrer" href="https://www.youtube.com/@ChromatographyTalk/videos"><strong>YouTube channel</strong></a></p></blockquote>

Unlocking Hemoglobin Variant Detection: LC-HR-MS Breakthrough with Ainslie Chen

Article

Video

Environment

Scientific article

Interview

Science and research

The Czech Advanced Technology and Research Institute (CATRIN) at Palacký University is a cutting-edge scientific hub dedicated to advancing research in the fields of nanotechnology, biotechnology, and biomedicine. At its core, CATRIN boasts outstanding scientific teams, featuring international researchers. We emphasize interdisciplinarity, foster global collaborations, and work to translate our research findings into practical applications.

CATRIN

Organomation, founded in 1959, designs and manufactures high-quality nitrogen evaporators and extraction systems. Known for innovation and durability, their lab instruments are used globally for efficient sample preparation with strong customer support.

Organomation

Bioanalytic Development of LC-MS/MS method

We take an individual and factual approach to developing a new method and performing analyses.

<h4><strong>An experienced partner in the LC-MS/MS analysis industry</strong></h4><p>If you are interested in performing quantitative, qualitative or mixed analysis using LC-MS/MS analytical methods but lack such capabilities due to lack of equipment, “know-how” or are looking for a team to perform analysis for a project - you have come to the right place. We work on <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/companies/315"><strong>equipment</strong></a> with high sensitivity, speed and specificity. Our team is a group of specialists with comprehensive experience in the industry. The LabExperts <a target="_blank" rel="noopener noreferrer" href="https://labexperts.com.pl/zespol/">team</a> has participated in many scientific projects, R&amp;D and commercial implementations. We take an individual and factual approach to developing a new method and performing analyses:</p><ul><li>In the first stage, we get to know your requirements - to align expectations with capabilities;</li><li>Next, we will form and approve the framework for cooperation, ensuring the observance of confidentiality by signing a non-disclosure agreement (NDA);</li><li>We will plan together and, for our part, meet the deadlines for the completion of the set tasks;</li><li>We will perform preliminary studies, after which we will decide together whether and to what extent we continue to develop the methods;</li><li>We will handle the development of the sample preparation procedure;</li><li>We will select the best parameters for the LC-MS/MS analytical method;</li><li>The analytical method along with the sample preparation procedure will be validated according to generally accepted guidelines and standards, or we will establish the required acceptance criteria and ranges for your needs;</li><li>We will perform LC-MS/MS analyses of a series of samples;</li><li>We will provide results in the form of easy-to-read reports at each required stage;</li><li>We will evaluate the feasibility and assist in the transfer of the method to your laboratory.</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Bioanalytic_Bioanalytic_Development_of_LC_MS_MS_method_2594c9fd54.jpg" alt="Bioanalytic: Bioanalytic Development of LC-MS-MS method." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Bioanalytic_Bioanalytic_Development_of_LC_MS_MS_method_2594c9fd54.jpg 234w," sizes="100vw" width="1536" height="1024"></p><p>Pricing and the framework for cooperation are always determined individually depending on the scope of the study. This is influenced by the amount of work and the complexity of the development of the sample preparation procedure and analytical method and routine analytics. As a rule, the final price consists of three separately priced elements: the cost of preliminary studies, method validation, and the cost of analysis of one sample within a series of analyses.</p><p>Don't beat your head against the wall - we will help you achieve your goal!</p><p>We look forward to working with you!</p>

Bioanalytic Individual LC-MS/MS training

We are ready to prepare customized LC-MS/MS training for the needs of participants.

<h4><strong>BASIC INFORMATION</strong></h4><ul><li>TITLE: <strong>Customized LC-MS/MS Training</strong></li><li>CATEGORY: <strong>LC-MS/MS training</strong></li><li>LOCATION: <strong>Lodz, PL</strong> or other</li><li>TRAINING TIME: <strong>1-5 days</strong> or more</li><li>NUMBER OF PARTICIPANTS: <strong>4-8 people</strong></li><li>EQUIPMENT:<strong> SCIEX QTRAP/QTOF LC-MS/MS</strong></li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Bioanalytic_Bioanalytic_Individual_LC_MS_MS_training_8a73408c56.jpg" alt="Bioanalytic: Bioanalytic Individual LC-MS-MS training." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Bioanalytic_Bioanalytic_Individual_LC_MS_MS_training_8a73408c56.jpg 245w," sizes="100vw" width="1536" height="930"></p><h4><strong>TRAINING DESCRIPTION</strong></h4><p>Customized LC-MS/MS training we are ready to prepare for the needs of participants, discussing:</p><ul><li>theoretical basics of chromatography, mass spectrometry,</li><li>practical operation of the LC-MS/MS system,</li><li>qualitative and quantitative analysis,</li><li>DDA &amp; DIA screening methods,</li><li>“omics” analyses,</li><li>validation of analytical methods,</li><li>solving basic methodological and technical problems,</li><li>software,</li><li>calibration,</li><li>“tips&amp;tricks”,</li><li>etc...</li></ul><p>We offer training for both novices starting the fascinating adventure of LC-MS/MS analytics, as well as for those who are LC-MS/MS users and are interested in expanding and consolidating their knowledge.</p><h4><strong>Framework training program</strong></h4><ul><li>individual LC-MS/MS training is developed according to the customer's demand</li><li>conducting theoretical and/or practical training at the customer's workplace</li><li>carrying out theoretical and/or practical training in a laboratory in Lodz</li></ul>

Bioanalytic Basic LC-MS/MS training

Basic LC-MS/MS training covers the theoretical basics of mass spectrometry and familiarization with the basic operation of the instrument.

<h4><strong>BASIC INFORMATION</strong></h4><ul><li>TITLE: <strong>Basic LC-MS/MS training</strong></li><li>CATEGORY: <strong>LC-MS/MS training</strong></li><li>LOCATION: <strong>Lodz, PL</strong></li><li>TRAINING TIME: <strong>3 days</strong></li><li>NUMBER OF PARTICIPANTS: <strong>up to 5 people</strong></li><li>EQUIPMENT:<strong> SCIEX QTRAP </strong><span class="ts-pf-details-content"><strong>&amp; </strong></span><strong>QTOF LC-MS/MS</strong></li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Bioanalytic_Bioanalytic_Basic_LC_MS_MS_training_fb1382a55b.jpg" alt="Bioanalytic: Bioanalytic Basic LC-MS-MS training." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Bioanalytic_Bioanalytic_Basic_LC_MS_MS_training_fb1382a55b.jpg 205w," sizes="100vw" width="1293" height="987"></p><h4><strong>TRAINING DESCRIPTION</strong></h4><p>Basic LC-MS/MS training covers the theoretical basics of mass spectrometry and familiarization with the basic operation of the instrument. Basic LC-MS/MS training is primarily aimed at those who are new to LC-MS/MS equipment or who wish to become familiar with this analytical technique. During the training, the following will be presented:</p><ul><li>principles of developing and optimizing quantitative and qualitative methods on low (triple quadrupole, QTRAP) and high resolution (QTOF) instruments,</li><li>basic functionality of the software,</li><li>procedures and objectives of instrument calibration,</li><li>principles of maintaining the cleanliness of mass spectrometer operation.</li></ul><h5><strong>Basic LC-MS/MS training - the program</strong></h5><p><span style="font-size:20px;"><strong>Day I</strong></span></p><p><strong>Theoretical classes:</strong></p><ul><li>Introduction to LC</li><li>Introduction to mass spectrometry (basics)</li><li>Quantitative analysis.</li></ul><p><strong>Practical part:</strong></p><p>QTRAP:</p><ul><li>QTRAP scanning modes on the instrument - Q1, , MS2, MRM, demonstration and discussion on the example of a selected pesticide of the fragmentation spectrum and its fragmentation pathway.</li><li>MRM pair formation (manual, semi-automatic, automatic).</li><li>optimization of ion source parameters -T-conector</li><li>explanation of the main parameters related to LC (column selection, gradient vs isocrat, autosampler)</li><li>LC-MS/MS method setup and optimization</li></ul><p>QTOF:</p><ul><li>manual and automatic optimization of MRM<sup>HR</sup></li><li>ion source and LC parameters (transfer from method developed above)</li></ul><p>Sequence of quantitative analysis on both instruments.</p><p><span style="font-size:20px;"><strong>Day II</strong></span></p><p><strong>Quantitative analysis:</strong></p><ul><li>data processing and analysis,</li><li>reporting - Sciex OS (QTRAP, QTOF).</li><li>Discussion of types of integration algorithms (MQ4, autopeak) and integration parameters.</li><li>independent selection of integration parameters and plotting of master curves.</li><li>independent data analysis and generation of analysis report.</li></ul><p><strong>Qualitative analysis:</strong></p><ul><li>Theoretical introduction - introduction to qualitative analysis:</li><li>qwadrupole modes (Prec/NL),</li><li>trap modes (EMS, EPI, MS3),</li><li>QTOF modes (TOF MS, TOF MS/MS).</li><li>mixed methods,</li><li>targeted vs. untargeted analysis,</li><li>DDA (IDA) - discussion of method development,</li></ul><p><strong>Practical part:</strong></p><ul><li>creation of qualitative methods on QTRAP (Prec-IDA, MRM-IDA), other parameters (LC, ion source) as the previous day,</li><li>LightSight - discussion of operation, creation of MRM-IDA multimethod for selected pesticide and analysis of samples (night).</li><li>QTOF - creation of IDA method, other parameters (LC, ion source) as the previous day.</li></ul><p>Sequence of qualitative analysis overnight.</p><p><span style="font-size:20px;"><strong>Day III</strong></span></p><p><strong>Qualitative data analysis:</strong></p><p>QTRAP:</p><ul><li>Discussion of Prec-IDA, MRM-IDA results - what we see in different types of MS and MS/MS scans. Manual review of data and via IDA Explorer (SciexOS).</li><li>Analysis of results in LightSight, comparison with Prec-IDA, for example - advantages/disadvantages</li></ul><p>QTOF:</p><ul><li>search for potentially present compounds in the sample,</li><li>manual comparison of blank vs. test sample,</li><li>manual by XIC extraction (by sum formula),</li><li>Formula finder - derivation of sum formula on TOF MS data and verification of fragmentation on TOF MS/MS data</li><li>search in IDA Explorer mode - application of filters: similarity, isotopic distribution, mass defect,</li><li>database searching,</li><li>Molecule Profiler - demonstration of software capabilities on selected pesticide example,</li></ul><p><strong>Instrument calibration:</strong></p><ul><li>resolution, mass-to-charge ratio, intensity,</li><li>Q1 and Q3, LIT (MS and MS/MS), TOF MS and TOF-MS/MS</li><li>Automation vs. manual calibration,</li></ul><p><strong>LC-MS/MS application examples</strong></p><p><strong>Summary</strong></p><p><strong>Discussion</strong></p>

Bioanalytic Quantitative LC-MS/MS analysis training

The goal of the training is to introduce users to the procedures and capabilities of the LC-MS/MS system and software to achieve sensitivity, selectivity, precision and reproducibility in quantitative analysis.

<h4><strong>BASIC INFORMATION</strong></h4><ul><li>TITLE: <strong>Quantitative LC-MS/MS analysis training</strong></li><li>CATEGORY: <strong>LC-MS/MS training</strong></li><li>LOCATION: <strong>Lodz, PL</strong></li><li>TRAINING TIME: <strong>3 days</strong></li><li>NUMBER OF PARTICIPANTS: <strong>up to 5 people</strong></li><li>EQUIPMENT:<strong> SCIEX QTRAP LC-MS/MS</strong></li></ul><figure class="image"><img style="aspect-ratio:1200/675;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Bioanalytic_Bioanalytic_Quantitative_LC_MS_MS_analysis_training_d13b5d8127.jpg" alt="Bioanalytic: Bioanalytic Quantitative LC-MS-MS analysis training." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Bioanalytic_Bioanalytic_Quantitative_LC_MS_MS_analysis_training_d13b5d8127.jpg 245w," sizes="100vw" width="1200" height="675"></figure><h4><strong>TRAINING DESCRIPTION</strong></h4><p>Quantitative LC-MS/MS analysis - the training is designed for laboratory personnel using LC-MS/MS systems for quantitative analysis. The following topics are covered during the training:</p><ul><li>Triple quadrupole spectrometer calibration</li><li>MRM pair formation and optimization</li><li>Optimization of ion source parameters</li><li>Optimization of chromatographic parameters</li><li>Sample preparation using the example of blood drawn on <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1283"><strong>Mitra®</strong></a> samplers (VAMS)</li><li>Matrix effect, internal standards (ISTD), matrix curves</li><li>Validation of the quantitative method</li><li>Reporting of results</li></ul><p>The goal of the training is to introduce users to the procedures and capabilities of the LC-MS/MS system and software to achieve sensitivity, selectivity, precision and reproducibility in quantitative analysis while covering the widest possible linear range of concentrations.</p><h3><strong>Training program</strong></h3><h4><span style="font-size:20px;"><strong>Day I</strong></span></h4><h5><strong>Theoretical part:</strong></h5><p>Triple quadrupole structure, ionization, MRM and sMRM scanning, chromatography, multimethods</p><h5><strong>Practical part:</strong></h5><ul><li>Q1/Q3 calibration (10 Da/s), MS/MS - resolution, m/z, intensity.</li><li>MRM pair formation and optimization (manual, semi-automatic, automatic).</li><li>Ion source optimization - T-concector and FIA</li><li>Gradient vs isocrat, dosing, column selection, temperature selection, other important parameters</li><li>Establishment and optimization of LC-MS/MS method.</li><li>How to take care of MS cleanliness - ionization time programming, multi-way valve, cleaning of ion source and instrument front end</li></ul><p>Sample preparation in pure solvent (standard curve, QC, solvent, solvent+ISTD, test samples), overnight analysis sequence.</p><h4><span style="font-size:20px;"><strong>Day II</strong></span></h4><h5><strong>Practical part - preparation of whole blood samples (Mitra®):</strong></h5><ul><li>Preparation of matrix standard curves</li><li>Preparation of quality control (QC) samples in three concentrations</li><li>Preparation of blank samples (without ISTD and with ISTD).</li><li>Preparation of samples for recovery determination (“pre-spiked” and “post-spiked”)</li><li>Preparation of test samples</li></ul><h5><strong>Theoretical part:</strong></h5><ul><li>Samples in the matrix - discussion of the matrix effect and ways to level it.</li><li>Optimization of sample preparation method and LC-MS/MS method</li></ul><h5><strong>Practical part:</strong></h5><ul><li>Sample extraction from Mitra® samplers for LC-MS/MS analysis.</li><li>Sequence of analysis of prepared samples overnight</li></ul><h4><span style="font-size:20px;"><strong>Day III</strong></span></h4><h5><strong>Theoretical part:</strong></h5><ul><li>Validation of the quantitative LC-MS/MS method</li></ul><h5><strong>Practical part:</strong></h5><ul><li>Software - data integration algorithms, signal smoothing, weighing.</li><li>Matrix curves vs curves in solvent, influence of ISTD (Sciex OS).</li><li>Method validation - validation criteria, determination of LOD, LLOQ, ULOQ, linearity, working range of the method, repeatability, recovery.</li><li>Preparation of summary validation reports</li><li>Reporting of results from test samples - report vs export of data to Excel.</li><li>Summary and discussion.</li></ul>

Bioanalytic QTRAP vs QTOF Quality analysis training

The training includes a presentation of the basic differences in application and a comparison of the capabilities of QTRAP and QTOF instruments in qualitative analysis.

<h4><strong>BASIC INFORMATION</strong></h4><ul><li>TITLE: <strong>QTRAP vs QTOF Quality analysis training</strong></li><li>CATEGORY: <strong>LC-MS/MS training</strong></li><li>LOCATION: <strong>Lodz, PL</strong></li><li>TRAINING TIME: <strong>3 days</strong></li><li>NUMBER OF PARTICIPANTS: <strong>up to 5 people</strong></li><li>EQUIPMENT:<strong> SCIEX QTRAP </strong><span class="ts-pf-details-content"><strong>&amp; </strong></span><strong>QTOF LC-MS/MS</strong></li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Bioanalytic_Bioanalytic_QTRAP_vs_QTOF_Quality_analysis_training_18ca66163f.jpg" alt="Bioanalytic: Bioanalytic QTRAP vs QTOF Quality analysis training." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Bioanalytic_Bioanalytic_QTRAP_vs_QTOF_Quality_analysis_training_18ca66163f.jpg 221w," sizes="100vw" width="1000" height="707"></p><h4><strong>TRAINING COURSE DESCRIPTION</strong></h4><p><strong>QTRAP vs QTOF qualitative analysis</strong> - the training is aimed at people who perform analyses related to substance identification or metabolite search in their research work. The training includes a presentation of the basic differences in application and a comparison of the capabilities of QTRAP and QTOF instruments in qualitative analysis. In addition to the theoretical session, participants will undergo a course in the development and optimization of <strong>DDA (IDA)</strong> (QTRAP &amp; QTOF) and <strong>DIA (SWATH) </strong>(QTOF) methods. Analysis and comparison of results will be conducted using <a target="_blank" rel="noopener noreferrer" href="https://sciex.com/products/software/sciex-os-software">SciexOS</a>, <a target="_blank" rel="noopener noreferrer" href="https://sciex.com/products/software/markerview-software">MarkerView</a>, <a target="_blank" rel="noopener noreferrer" href="https://sciex.com/products/software/lightsight-software">LightSight</a> and <a target="_blank" rel="noopener noreferrer" href="https://sciex.com/products/software/molecule-profiler-software">MoleculeProfiler</a> software.</p><h5><strong>Training program</strong></h5><h4><span style="font-size:20px;"><strong>Day I</strong></span></h4><h5><strong>Theoretical part</strong></h5><ul><li>Principle of operation of MS/MS systems</li><li>Differences and capabilities of QTRAP and QTOF</li><li>Comparison of typical analytical procedures and their application</li><li>DDA (IDA) vs DIA (SWATH) methodology.</li><li>Supporting software - LightSight, Molecule Profiler, ACD Labs, MarkerView</li><li>General principles of compound fragmentation</li></ul><h4><span style="font-size:20px;"><strong>Day II</strong></span></h4><p><strong>Objective - to develop methods to search for metabolites of a known substance.</strong></p><h5><strong>QTRAP</strong></h5><ul><li>Development of IDA screening methods (pMRM, Prec/NL, EMS)</li><li>Optimization of LC-MS/MS IDA method</li><li>Data acquisition</li></ul><h5><strong>QTOF</strong></h5><ul><li>Development and optimization of LC-MS/MS IDA and SWATH methods</li><li>Data acquisition</li></ul><h4><span style="font-size:20px;"><strong>Day III</strong></span></h4><p><strong>Objective - identification and profiling of metabolites of a known substance</strong></p><h5><strong>QTRAP data analysis</strong></h5><ul><li>Manual search and identification</li><li>LightSight, MarkerView</li></ul><h5><strong>QTOF data analysis</strong></h5><ul><li>Search and data analysis methods</li><li>Manual search and identification</li><li>IDA vs SWATH</li><li>Automated search and identification - SciexOS, databases</li><li>Molecule Profiler, MarkerView</li></ul><p>Summary and discussion<br>&nbsp;</p>

Bioanalytic QTOF quantitative and qualitative analysis training

The purpose of the training is to introduce users to the capabilities of the LC-HR-MS/MS (QTOF) system in quantitative and qualitative analysis.

<h4><strong>BASIC INFORMATION</strong></h4><ul><li>TITLE:&nbsp;<strong> QTOF quantitative and qualitative analysis training</strong></li><li>CATEGORY: <strong>LC-MS/MS training</strong></li><li>LOCATION: <strong>Lodz, PL</strong></li><li>TRAINING TIME: <strong>3 days</strong></li><li>NUMBER OF PARTICIPANTS: <strong>up to 5 people</strong></li><li>EQUIPMENT:<strong> SCIEX</strong><span class="ts-pf-details-content"><strong> </strong></span><strong>QTOF LC-MS/MS</strong></li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Bioanalytic_Bioanalytic_QTOF_quantitative_and_qualitative_analysis_training_af1620ae8c.jpg" alt="Bioanalytic: Bioanalytic QTOF quantitative and qualitative analysis training." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Bioanalytic_Bioanalytic_QTOF_quantitative_and_qualitative_analysis_training_af1620ae8c.jpg 221w," sizes="100vw" width="1000" height="707"></p><h4><strong>TRAINING COURSE DESCRIPTION</strong></h4><p><strong>Qualitative and quantitative analysis of QTOF</strong> - the training is designed for laboratory personnel using <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?instrumentationItems=30&amp;mainauthorItems=55"><strong>high-resolution (HR) LC-MS/MS</strong></a> systems for qualitative and quantitative analysis. The following topics are covered during the training:</p><ul><li><strong>QTOF spectrometer calibration</strong></li><li><strong>Targeted and untargeted methods</strong></li><li><strong>Quantitative analysis (TOF MS, MRMhr)</strong></li><li><strong>Qualitative and quantitative analysis - DDA (IDA) vs DIA (SWATH) methodology</strong></li><li><strong>Software and its use in high-resolution data analysis</strong></li><li><strong>Reporting of results</strong></li></ul><p>The purpose of the training is to introduce users to the capabilities of the LC-HR-MS/MS (QTOF) system in quantitative and qualitative analysis. To point out the advantages of high resolution in identifying or confirming the presence of substances in a sample and also the strengths of modern QTOF systems in parallel quantitative analysis.</p><h3><strong>Training program</strong></h3><h4><span style="font-size:20px;"><strong>Day I</strong></span></h4><h5><strong>Theoretical part</strong></h5><ul><li>The principle of operation and capabilities of the QTOF system</li><li>Comparison of typical analytical procedures and their application</li><li>Targeted and quantitative analysis (TOF MS vs MRMhr)</li><li>DDA (IDA) vs DIA (SWATH) methodology.</li><li>Supporting software - Molecule Profiler, ACD Labs, MarkerView</li><li>General principles of compound fragmentation</li></ul><h4><span style="font-size:20px;"><strong>Day II</strong></span></h4><p><strong>Objective</strong> - to develop methods for quantitative analysis, confirmation or search for metabolites of a known substance, general characterization of the sample.</p><h5><strong>Practical part:</strong></h5><ul><li>Creation and optimization of the MRMhr targeted method</li><li>Creation and optimization of a non-targeted method IDA</li><li>Creation and optimization of the non-targeted method SWATH</li><li>Data acquisition (overnight)</li></ul><h4><span style="font-size:20px;"><strong>Day III</strong></span></h4><p><strong>Objective</strong> - quantitative analysis, confirmation of the presence or identification of metabolites of a known substance, general characterization of the sample (identification of compounds present in the sample), profiling.</p><h5><strong>Practical part:</strong></h5><ul><li>Quantitative analysis - TOF MS vs MRMhr</li><li>Methods for searching and analyzing data</li><li>IDA vs SWATH data</li><li>Manual search and identification</li><li>Automated search and identification - SciexOS, databases</li><li>Molecule Profiler, MarkerView</li><li>Summary and discussion</li></ul>

Products from category Services focused on LC/MS distributed by Bioanalytic - page 1

Related content

Unlocking Hemoglobin Variant Detection: LC-HR-MS Breakthrough with Ainslie Chen

Current sensors are not good enough. Scientists propose a new way to monitor plant health

Meeting EU Drinking Water Standards: The Critical Role of Sample Prep in Trace Contaminant Analysis