In the week of February 16, the following webinars await you in the field of liquid phase and especially HPLC and LC/MS.<blockquote><h4><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinars">👉 DETAILS AND REGISTRATION IN THE WEBINARS SECTION</a></h4>👉 Search and filter in the largest global database with over 5 000 GC, LC, MS and spectroscopy webinars.</blockquote><h5>1. Agilent Technologies: From Complex to Simplicity – Get More Peace of Mind on Your HPLC Workflows with InfinityLab Assist</h5><ul><li>Mo, 16.2.2026 11:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/5908">Registration</a></li></ul>Discover how Agilent InfinityLab Assist simplifies LC system control with intuitive multitouch operation, guided troubleshooting, and smart monitoring to boost efficiency and reduce downtime.<h5>2. Thermo Fisher Scientific: Driving the Process Development of Recombinant Therapeutic Products with Automated MS-Based Target Peptide Mapping</h5><ul><li>Tu, 17.2.2026 11:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/5931">Registration</a></li></ul>Explore automated MS-based MAM workflows for peptide mapping, enabling faster CMC decisions and scalable analytics from development to QC readiness.<h5>3. Thermo Fisher Scientific: PFAS Analysis Solutions – Innovations for Today’s Labs</h5><ul><li>Tu, 17.2.2026 11:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/5818">Registration</a></li></ul>Explore the latest challenges and solutions in PFAS analysis for environmental and food testing, including advanced workflows that improve sensitivity, accuracy, and lab efficiency.<h5>4. Phenomenex: Understanding and Applying USP Chapter 621 for Generic Pharmaceutical Applications</h5><ul><li>We, 18.2.2026 10:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/5794">Registration</a></li></ul>Learn the key guidelines defined in USP &lt;621&gt; and practical examples of how to apply them in generic pharmaceutical method development.<h5>5. SCIEX: Genome Integrity Analysis of Adeno-Associated Viruses (AAV) by Genome Sizing Using a SCIEX Capillary Electrophoresis System</h5><ul><li>We, 18.2.2026 11:30 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/5935">Registration</a></li></ul>Join this webinar to learn how capillary electrophoresis enables reliable genome integrity analysis of AAV for gene therapy applications.<h5>6. Waters Corporation: The Gold Standard – Achieving Optimal Peptide Purification with Reversed-Phase Chromatography</h5><ul><li>We, 18.2.2026 17:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/5917">Registration</a></li></ul>Discover why reversed-phase chromatography remains the gold standard for peptide purification and analytical performance.<h5>7. Axcend: Understanding Capillary LC – Part 5: Detectors, Sensitivity, and MS/UV</h5><ul><li>We, 18.2.2026 20:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/5829">Registration</a></li></ul>Join experts to explore MS, UV, and electrochemical detectors at the capillary scale and learn how to achieve reliable sensitivity in capillary LC workflows.<h5>8. Thermo Fisher Scientific: Single Cell and Immunopeptidomics Explorations on Orbitrap Astral MS</h5><ul><li>Th, 19.2.2026 11:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/5932">Registration</a></li></ul>Discover how Orbitrap Astral MS and Vanquish Neo HPLC enable deep single-cell proteomics and immunopeptidomics from ultra-low-input clinical samples.<h5>9. Evosep Biosystems: Experimental Design Considerations for Scalable Proteomics</h5><ul><li>Th, 19.2.2026 16:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/5836">Registration</a></li></ul>Explore best practices for experimental design in LC-MS–based proteomics to build robust, reproducible, and scalable analytical workflows.<h5>10. Waters Corporation: Ask Me Anything About Managing Computerized System Risks to Data Integrity</h5><ul><li>Th, 19.2.2026 17:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/5809">Registration</a></li></ul>Learn practical strategies to manage computerized system risks in regulated laboratories and protect data integrity while ensuring compliance.<h5>11. Shimadzu Corporation: Automating a Comprehensive Amino Acid Panel for Inborn Errors of Metabolism</h5><ul><li>Th, 19.2.2026 20:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/webinar/5936">Registration</a></li></ul>Discover how Shimadzu’s CLAM-2040 automates LC-MS/MS sample preparation to standardize workflows, reduce manual handling, and improve consistency in clinical labs.

Webinars LabRulezLCMS Week 08/2026

Imaging of Protein Assemblies up to 231 kDa in Tissues with Nano-DESI Mass Spectrometry

Metalloproteins play essential roles in marine phytoplankton, yet their metalloproteomes remain poorly characterized. This study combines protein modeling, quantitative proteomics, and ICP-MS measurements to assess metal requirements across several phytoplankton species, including chlorophytes, a haptophyte, and a cyanobacterium.Results show strong agreement between proteome-inferred metal demands and measured cellular metal quotas, while providing deeper insight into biological functions. Mg-containing proteins were most abundant overall, with Zn, Fe, and Mn as dominant trace cofactors. Distinct differences between prokaryotic and eukaryotic phytoplankton were observed, and strain-level analysis demonstrated how metalloproteomes reflect environmental adaptation and metal limitation strategies.<blockquote><h4>The original article</h4><h4><a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acs.est.5c11233">Unlocking Phytoplankton Metallomes with Comparative Analysis of Metal Quotas, Quantitative Proteomics, and Inferred Metalloproteomes</a></h4>Qiong Zhang*, Jiayou Ge, Fengjie Liu, Shabaz Mohammed, Kedong Yin, and Rosalind E. M. RickabyEnviron. Sci. Technol. 2025, 59, 50, 27367–27377<a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1021/acs.est.5c11233">https://doi.org/10.1021/acs.est.5c11233</a><h6>licensed under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/">CC-BY 4.0</a></h6></blockquote>Selected sections from the article follow. Formats and hyperlinks were adapted from the original.Many important biological processes of phytoplankton, including photosynthesis, carbon fixation, and nitrogen reduction, rely on enzymes that have metals as cofactors. <a href="javascript:void(0);">(1)</a> It has been estimated that half of all enzymes must be associated with a particular metal to function. <a href="javascript:void(0);">(2)</a> The availability of metals in the environment has changed over geological time and, given imperfections in the selectivity of metal transport systems, proteins have evolved to make the best use of metals that are more available. <a href="javascript:void(0);">(3−5)</a> Depending on their evolutionary histories, different groups of marine phytoplankton may have differences in their metalloprotein compositions and metal transport strategies. The evolving trace metal availability in the environment, thus, may provide a selective pressure to promote the proliferation of different phytoplankton groups in the oceanic environment, affecting the phytoplankton community structure with knock-on effects on the marine food web and carbon sequestration. <a href="javascript:void(0);">(5)</a> It is crucial to understand the utilization of trace metals by different groups of marine phytoplankton that inhabit contrasting niches in the modern ocean, not only by assessing the accumulation of trace metals in cells but also examining the functions of trace metals in different biological pathways.In previous studies, the utilization or requirements of trace metals by marine phytoplankton were mostly determined by measuring the elemental stoichiometry in cells (metallome or quota of trace metals). <a href="javascript:void(0);">(6−8)</a> In the field, attempts have also been made to investigate the elements in phytoplankton <a href="javascript:void(0);">(9,10)</a> which have then been compared with profiles in the abiotic environment to understand their relationships. <a href="javascript:void(0);">(11)</a> The discovery of various metal storage proteins and the plasticity in elemental quotas under different environmental conditions raise the question of whether intracellular trace metal quotas reflect true differences in trace metal usage by phytoplankton. <a href="javascript:void(0);">(12,13)</a> In the past few decades, more and more studies have focused on metal–protein partnerships, using approaches such as genome-wide analysis to identify homologues of known metalloproteins and other deduced metal-binding motifs encoded within sequenced genomes. <a href="javascript:void(0);">(5,14)</a> However, this approach has limitations in estimating metal abundance in cells because not all genes predicted in the genome would be translated and expressed as proteins under all environments, and a single gene for a metalloprotein could be highly expressed, such that a translation from genetic presence to a required concentration is not linear and could be environment-dependent. To obtain in situ metal abundance in metalloproteins in cells, native separation of proteins by HPLC or PAGE followed by the detection of metals using ICP-MS <a href="javascript:void(0);">(15,16)</a> has been used. This approach also has limitations in that, without bioinformatics, it cannot identify the function of proteins within which the metals are found, and it may also depend on the composition of the media to which the organism has been exposed and in which it has been growing. An ideal way to solve the problem would be to separate and purify each of the proteins and then identify both the associated metal (e.g., by ICP-MS) and the protein sequence (e.g., by mass spectrometry). However, this approach is constrained by the resolution of chromatographic or electrophoretic techniques, making it challenging to establish the metal–protein associations unambiguously; many proteins often co-occur in metal-containing fractions. Additionally, this method requires huge volumes of biomass and is both time-consuming and complex, complicating the reconstruction of the expressed metalloproteome in cells. The techniques and challenges for metalloproteomics have been discussed in detail in previously published review articles (and the references therein). <a href="javascript:void(0);">(17)</a>In this study, we determined the trace metal utilization (the metallome) of different phytoplankton from their expressed proteome via a protein modeling and homologue identification approach, and then compared the resulting metallome with the metal quota data measured by the traditional inductively coupled plasma mass spectrometry (ICP-MS). This approach allows the building of a link between the truly used trace elements and their biological functions in phytoplankton. We aim to fill the gap between an estimation of metals encoded in the genome and metal analysis by ICP-MS in phytoplankton, which may be more broadly applicable to infer cellular metallomes.<h3>Materials and Methods</h3><h4>ICP-MS Analysis</h4>All preparation of samples for ICP-MS measurement was undertaken using trace metal clean methods. All plasticware used in this study, including culture flasks, pipette tips, and centrifuge tubes, was precleaned in 10% quartz-distilled HCl and thoroughly rinsed with 18 MΩ cm water in a clean laboratory. Trace elements in the filtered lysates of G. huxleyi (OA1, OA4, OA8, OA15, OA16, OA23, and RCC 1242) and Synechocystis (FACHB898) strains were measured using an ICP-MS. The detailed ICP-MS method and instrumental settings are described in Zhang et al. (2018). <a href="javascript:void(0);">(31)</a><h4>Protein Mass Spectrometry</h4>The peptides were resuspended in 5% formic acid and 5% DMSO prior to mass spectrometry. They were separated on an <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=3&amp;search=Ultimate+3000+UHPLC">Ultimate 3000 UHPLC </a>system (Thermo Fisher Scientific) and electrosprayed directly into a <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/559">Q-Exactive Mass Spectrometer</a> (Thermo Fisher Scientific) through an EASY-Spray nanoelectrospray ion source (Thermo Fisher Scientific). The peptides were trapped on a C18 PepMap100 precolumn (300 μm i.d. × 5 mm, 100 Å, Thermo Fisher Scientific) using solvent A (0.1% formic acid in water) at a pressure of 500 bar. The peptides were separated on an in-house packed analytical column (75 μm i.d. × 50 cm packed with ReproSil-Pur 120 C18-AQ, 1.9 μm, 120 Å, Dr. Maisch GmbH) using a linear gradient (length: 65 min, 15% to 35% solvent B [0.1% formic acid in acetonitrile], flow rate: 200 nL/min). The raw data were acquired on the mass spectrometer in a data-dependent mode (DDA). Full scan MS spectra were acquired in the Orbitrap (scan range 350–1500 m/z, resolution 70000, AGC target 3e6, maximum injection time 50 ms). After the MS scans, the 10 most intense peaks were selected for HCD fragmentation at 30% of normalized collision energy. HCD spectra were also acquired in the Orbitrap (resolution 17500, AGC target 5e4, maximum injection time 120 ms, isolation window 1.5 m/z) with the first fixed mass at 180 m/z. Charge exclusion was selected for unassigned and 1+ ions. The dynamic exclusion was set to 20 s.<h3>Results and Discussion</h3><h4>Trace Elements Determined from the Expressed Proteomes of Different Phytoplankton</h4>Based on the expressed proteome sequences, we predicted metal-binding proteins and compared their distribution among various phytoplankton species (<a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acs.est.5c11233#fig2">Figure 2</a>). The inference revealed 28 different metals in G. huxleyi, 31 different metals in C. reinhardtii, and 30 different metals in Synechocystis. Although only 6 different metals were identified in O. tauri proteins, it has to be noted that the analysis for O. tauri was only based on the 40 most abundant proteins reported in this organism <a href="javascript:void(0);">(21)</a> and, hence, the listed elements, including Mg, Fe, Mn, Ca, Zn, and Cu, may represent the most essential metals for the species.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Environ_Sci_Technol_2025_59_50_27367_27377_Figure_2_The_number_of_metal_binding_proteins_identified_in_the_expressed_proteome_of_the_haptophyte_G_9b8ac0f004.jpeg" alt="Environ. Sci. Technol. 2025, 59, 50, 27367–27377: Figure 2. The number of metal-binding proteins identified in the expressed proteome of the haptophyte G. huxleyi (a), the chlorophyte C. reinhardtii (b) and O. tauri(c), and the cyanobacteria Synechocystis (d). Pie charts show the percentages of metalloproteins containing specific metals. Original proteome data for G. huxleyi are from Mckew et al. (2013) (24) for C. reinhardtii are from Hsieh et al. (2013) (77) for O.tauriare from Martin et al. (2012) (21) for Synechocystisare from Chen et al. (2018). (22) *Noted that for O. tauri, only the 40 most abundant proteins were included in this analysis. ND: no metal binding was found in the proteins." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Environ_Sci_Technol_2025_59_50_27367_27377_Figure_2_The_number_of_metal_binding_proteins_identified_in_the_expressed_proteome_of_the_haptophyte_G_9b8ac0f004.jpeg 123w," sizes="100vw" width="934" height="1181">The number of proteins that bind with different metals varies dramatically in phytoplankton. For metalloproteins, there are variations in the binding affinities of different metals to organic molecules. For example, the affinities of divalent metals to proteins have a tendency to follow a universal order of preference, namely the Irving-Williams series (Mg2+ and Ca2+ [weakest binding] &lt; Mn2+ &lt; Fe2+ &lt; Co2+ &lt; Ni2+ &lt; Cu2+ &gt; Zn2+). <a href="javascript:void(0);">(43)</a> Cells can simultaneously contain proteins having high-affinity-binding metals, such as Cu and Zn, and others that require uncompetitive metals, such as Mg and Ca. One of the least competitive metals for binding with biological chelators, Mg, is even found to be the most widely distributed metal in the metalloproteomes of various phytoplankton species in this study, supporting the observations of high concentrations in the protein fraction of cells (at millimolar concentrations <a href="javascript:void(0);">(31)</a>).In all phytoplankton species in our analysis, the Mg-containing proteins are found to have the highest proportion in all metalloproteins identified. About 30% of the metalloproteins in different strains of phytoplankton are found to contain Mg or depend on it for function (<a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acs.est.5c11233#fig2">Figure 2</a>), suggesting the important role of Mg in phytoplankton cells. It is generally coordinated in protein complexes by ATP or ADP and has also been found to be largely distributed in the chloroplasts or thylakoids in G. huxleyi and Synechocystis. <a href="javascript:void(0);">(22,24)</a> The essential roles of Mg in plants have been reported in various studies. Mg2+ is known to be the central atom of the chlorophyll molecule, and its levels in the chloroplast regulate the activity of key photosynthetic enzymes. <a href="javascript:void(0);">(44)</a> It was reported that approximately 15–35% of total Mg is in the chloroplasts of a plant, <a href="javascript:void(0);">(45)</a> and it also serves as an osmotically active ion in the regulation of cells <a href="javascript:void(0);">(46)</a><h4>Comparison Between Metallome Measured Directly and Reconstructed from Proteins</h4>A large proportion of metals, such as Fe, Mn, and Cu, are found in membrane proteins,and may contribute significantly to total cellular quotas. <a href="javascript:void(0);">(54,55)</a> However, for method development purpose, we endeavored to remove the cell membranes from our samples to focus mostly on the analysis of intracellular metal quotas and metalloproteins in the cytosol fraction in this study. We note that our analysis includes some membrane-bound proteins likely derived from organelles or surface membranes disrupted during sonication.The derivation of cellular metal composition, as determined by two different methods, is compared in <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acs.est.5c11233#fig3">Figure 3</a>. The abundance of metal in the proteins is determined as the relative abundance of the protein multiplied by the number of metal ions needed for the specific protein. The abundance of the proteins was normalized to ensure that the total intensities from each replicate measurement for the same species were similar. Since the proteomic data used here were generated from different studies using different instruments, we cannot quantify or compare the absolute biomass of proteins used for each species. Therefore, we cannot compare the absolute trace metal abundance between species solely from metal inferences of expressed proteomes. Nevertheless, we can estimate the relative abundance of different metals in the same species. For the elements that are both measured by the ICP-MS and identified in the proteome, there are generally good correlations (r2 = 0.81 in <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acs.est.5c11233#fig3">Figure 3</a>a and r2 = 0.74 in <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acs.est.5c11233#fig3">Figure 3</a>b) between the two approaches. This indicates that the metal compositions determined from the protein modeling may be reliable and, therefore, can reflect the metal usage in different phytoplankton. This would provide a level of assurance to further investigate the metal binding associated with various proteins, thereby deepening our understanding of the roles that different metals play in phytoplankton.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Environ_Sci_Technol_2025_59_50_27367_27377_Figure_3_Relationship_between_the_abundance_of_metals_determined_by_ICP_MS_analysis_e7b259e376.jpeg" alt="Environ. Sci. Technol. 2025, 59, 50, 27367–27377: Figure 3. Relationship between the abundance of metals determined by ICP-MS analysis (normalized to C, mmol/mol C) and metal abundance determined from the metalloproteome analysis (the unit is arbitrary). To account for strain variations, the ICP-MS data for the cellular metal content of G. huxleyi are average values from 7 G. huxleyi strains isolated from different areas of the ocean, and the proteome-derived metal composition data are average values calculated from 2 of those G. huxleyi strains (OA1 and OA16) isolated previously, and data from Mckew et al., 2013. (24) The ICP-MS data for Synechocystis are from Synechocystis sp. FACHB898 measured in this study, and the proteome data are calculated from Chen et al., 2018. (22) Noted that the abundance of metals from each proteome was calculated by using the metal stoichiometry multiplied by the relative abundance of proteins, which provides only a relative relationship of different trace metals, not absolute abundance. The symbols represent the mean values, and the error bars indicate standard deviations." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Environ_Sci_Technol_2025_59_50_27367_27377_Figure_3_Relationship_between_the_abundance_of_metals_determined_by_ICP_MS_analysis_e7b259e376.jpeg 245w," sizes="100vw" width="1384" height="641">Compared to the other metals investigated in this study, Ca and Mg appear to have a much higher relative abundance in the ICP-MS analysis than in the proteomic analysis of G. huxleyi and Synechocystis (<a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acs.est.5c11233#fig3">Figure 3</a>). These two elements are essential macronutrients for phytoplankton and plants. Ca is the most prominent secondary messenger that plays a crucial role in response to extracellular stimuli in all eukaryotes. Ca2+ fluxes are transported via Ca channels and transporters, such as Ca-ATPase, regulating a series of important biological functions, including mineral uptake and utilization, K+ homeostasis adjustment, and regulatory network activity in response to P or N deficiency. <a href="javascript:void(0);">(56)</a> Ca is not always incorporated into protein structures. The Ca abundance determined from the proteins in this study, therefore, is much lower than the actual Ca needed intracellularly. Similarly, the intracellular Mg2+ and K+ abundances should also be higher than those determined from the protein structures. Free Mg2+ and K+ are known to regulate cation–anion balance and serve as osmotically active ions in the regulation of cells <a href="javascript:void(0);">(46)</a> but free metal ion concentrations cannot be determined through the approach used in this study. Thus, it is not surprising to see much higher relative abundances of Ca and Mg in ICP-MS analysis than in proteomic analysis (<a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acs.est.5c11233#fig3">Figure 3</a>).

Unlocking Phytoplankton Metallomes with Comparative Analysis of Metal Quotas, Quantitative Proteomics, and Inferred Metalloproteomes

Article

Webinars

Scientific article

Science and research

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

KNAUER AppliChrom® ABOA SuperOH-P Columns for GPC/SEC

Optimally suited for aqueous SEC separations. Aqueous and highly hydrophilic polymeric base material.

AppliChrom® SEC columns for biopolymers and aqueous polymersOptimally suited for aqueous SEC separations. Aqueous and highly hydrophilic polymeric base material. Polymethacrylate resin, cross-linked with polyhydroxylated ether (surface contains some residual carboxyl functional groups)<h4>Properties:</h4><ul><li>Particle size: 7 µm for pore sizes up to 300 Å and 10 µm for pore sizes over 350 Å and the multipore columns</li><li>Stable between: pH 2–12.5</li><li>Pressure stable: for 30–70 bar depending on pore size</li><li>Temperature stability: between 10–85 °C</li><li>Flow rate: maximum 1 ml/min</li><li>Low column bleed for low detector noise</li><li>Large pore volume for optimal resolution</li><li>Individual pore sizes for individual molecular weight ranges</li><li>Multi-pore technology for a wide range of molecular sizes</li><li>Increased lifetime of SEC columns through combination of proprietary particle and packing technology</li><li>Recommended eluents: H₂O, buffers</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Appli_Chrom_ABOA_Super_OH_P_Pore_sizes_4cb72c682d.jpg" alt="KNAUER: AppliChrom® ABOA SuperOH-P - Pore sizes" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Appli_Chrom_ABOA_Super_OH_P_Pore_sizes_4cb72c682d.jpg 216w," sizes="100vw" width="1478" height="1071"><h4>Applications</h4>Water soluble (bio)polymers up to 40 000 kDa:<ul><li>proteins, oligonucleotides, virus, heparin, polyethylene oxide (PEO), polyethylene glycol (PEG), pullulan, maltodextrin, inulin, pectine, polycarboxylate ethers, gelatine, dextranes, polyacrylamide (PAM), PEGylated proteins acrylate dispersions</li></ul><h3>GPC &amp; SEC Columns</h3>GPC &amp; SEC systems offer solutions for various applications and laboratoriesGel permeation chromatography (GPC) and size exclusion chromatography (SEC) separate analytes by size using special columns with a porous matrix. The basic separation principle is based on the fact that smaller molecules penetrate these pores more strongly and therefore move more slowly through the matrix than larger molecules. GPC/SEC is often used as gentle and powerful purification technique or for quality control in research and development. Typical target molecules are polymers, dissolved in organic solvents for GPC, and macro biomolecules like proteins, antibodies or polysaccharides, dissolved in aqueous eluents for SEC.Separation is facilitated by selecting optimal particle and pore sizes. Therefore we offer a wide range of pore sizes (35, 100, 150, 250, 350, 500, 1000, 1500, 10E5, 10E6, 10E7 Å) and several particle sizes (5, 7, 10, 12, 20 µm) as a choice to customize for every application task.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Size_Exclusion_principle_2a432edcc1.webp" alt="KNAUER: Size Exclusion - principle" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Size_Exclusion_principle_2a432edcc1.webp 228w," sizes="100vw" width="1024" height="700"><h3>KNAUER AppliChrom® ABOA columns for aqueous SEC, organic GPC, and special applications</h3><ul><li>AppliChrom® ABOA StyDiViBe Series GPC-columns for GPC analysis of organic molecules using THF, toluene, chloroform.</li><li>AppliChrom ABOA SuperOH-P Series for aqueous GPC/SEC-analysis of mainly neutral and anionic polymers like heparins, polysaccharides, PEO, PEG,....</li><li>AppliChrom® ABOA DMSO-Phil-P Series for DMSO GPC/SEC analysis (humic substances, UF/MUF-glue, p-NIPA, many polycondensates, protein from pea or leguminosae,...)</li><li>AppliChrom® ABOA DMAc-Phil-P Series for GPC/ SEC analysis in DMAc, DMF, NMP. Good for many medium polar substances, polyoxazolines, lignin,...</li><li>AppliChrom® ABOA Cat-Phil-P Series for aqueous GPC/SEC-analysis of special aminic and polycationic polymers like p-DADMAc, PEI/ polyethylenimin, chitosan, copolymers with polyaminofunctions, but also useful for polyanions or neutral polymers like heparin or PEO/PEG, dextran or pullulan.</li><li>Seperation Ranges: 100–50 000 000 Da</li></ul><h4>You decide between classical GPC/SEC columns with conventional mixed pore technology or AppliChrom® BPT technology:</h4>Separate oligomers and polymers with the new GPC media line from AppliChrom® BPT synthesis technology for large range, high resolution separations with increased accuracy in calibration (patent pending).<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg" alt="KNAUER: AppliChrom® ABOA columns." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg 245w," sizes="100vw" width="1379" height="718">

KNAUER AppliChrom® ABOA RPpetide GPC Columns for RP

AppliChrom® Polymer based reversed phase (RP) columns to reversed phase (RP) separation with orthogonal selectivity to silica based columns.

AppliChrom® Polymer based reversed phase (RP) columns<h4>Properties:</h4><ul><li>Rigid, spherical styrenedivinylbenzene copolymer&nbsp;</li><li>Particle sizes between: 3 to 30 μm</li><li>Pore sizes of: 100–1 000 Å</li><li>Reversed Phase (RP) separation with orthogonal selectivity to silica based columns</li><li>Improved chemical stability</li><li>Stable between: pH 1.5–14</li><li>Temperature stability: 10–90 °C</li><li>Stable towards pressures: up to 150 bar</li><li>Low backpressure with high plate counts, ideal for preparative applications</li><li>Low column bleed for low detector noise</li><li>Up and down scaling ensured beteween analytical RP-HPLC and preparative process chromatography</li><li>Recommended eluents: &nbsp;H₂O/ACN or H₂O/MeOH with up to 1 % TFA, FA or NaOH additive</li></ul><h4>Applications</h4><ul><li>Polar peptides, proteins or vitamins, hydrophobic amines</li></ul><h3>GPC &amp; SEC Columns</h3>GPC &amp; SEC systems offer solutions for various applications and laboratoriesGel permeation chromatography (GPC) and size exclusion chromatography (SEC) separate analytes by size using special columns with a porous matrix. The basic separation principle is based on the fact that smaller molecules penetrate these pores more strongly and therefore move more slowly through the matrix than larger molecules. GPC/SEC is often used as gentle and powerful purification technique or for quality control in research and development. Typical target molecules are polymers, dissolved in organic solvents for GPC, and macro biomolecules like proteins, antibodies or polysaccharides, dissolved in aqueous eluents for SEC.Separation is facilitated by selecting optimal particle and pore sizes. Therefore we offer a wide range of pore sizes (35, 100, 150, 250, 350, 500, 1000, 1500, 10E5, 10E6, 10E7 Å) and several particle sizes (5, 7, 10, 12, 20 µm) as a choice to customize for every application task.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Size_Exclusion_principle_2a432edcc1.webp" alt="KNAUER: Size Exclusion - principle" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Size_Exclusion_principle_2a432edcc1.webp 228w," sizes="100vw" width="1024" height="700"><h3>KNAUER AppliChrom® ABOA columns for aqueous SEC, organic GPC, and special applications</h3><ul><li>AppliChrom® ABOA StyDiViBe Series GPC-columns for GPC analysis of organic molecules using THF, toluene, chloroform.</li><li>AppliChrom ABOA SuperOH-P Series for aqueous GPC/SEC-analysis of mainly neutral and anionic polymers like heparins, polysaccharides, PEO, PEG,....</li><li>AppliChrom® ABOA DMSO-Phil-P Series for DMSO GPC/SEC analysis (humic substances, UF/MUF-glue, p-NIPA, many polycondensates, protein from pea or leguminosae,...)</li><li>AppliChrom® ABOA DMAc-Phil-P Series for GPC/ SEC analysis in DMAc, DMF, NMP. Good for many medium polar substances, polyoxazolines, lignin,...</li><li>AppliChrom® ABOA Cat-Phil-P Series for aqueous GPC/SEC-analysis of special aminic and polycationic polymers like p-DADMAc, PEI/ polyethylenimin, chitosan, copolymers with polyaminofunctions, but also useful for polyanions or neutral polymers like heparin or PEO/PEG, dextran or pullulan.</li><li>Seperation Ranges: 100–50 000 000 Da</li></ul><h4>You decide between classical GPC/SEC columns with conventional mixed pore technology or AppliChrom® BPT technology:</h4>Separate oligomers and polymers with the new GPC media line from AppliChrom® BPT synthesis technology for large range, high resolution separations with increased accuracy in calibration (patent pending).<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg" alt="KNAUER: AppliChrom® ABOA columns." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg 245w," sizes="100vw" width="1379" height="718">

KNAUER AppliChrom® ABOA VivoSep SEC Columns

AppliChrom® SEC columns for water soluble (bio)polymers are multi hydrophilic layered SEC media for highest efficiency and low interaction.

AppliChrom® SEC columns for water soluble (bio)polymers<h4>Properties:</h4><ul><li>Multi hydrophilic layered SEC media for highest efficiency and low interaction</li><li>Available seperation ranges: from small molecules up to 5 500 kDa</li><li>Temperature stability: 10-90 °C</li><li>Stable between: pH 2–10</li><li>Pressure stability: up to 200 bar</li><li>Simple adaptation from HPLC to SEC with stainless steel instruments</li><li>Versatile tool for accurate protein molecular weight or size determination</li><li>Low column bleed for low detector noise</li><li>Increased lifetime of SEC columns through combination of proprietary particle and packing technology</li><li>Recommended eluents: H₂O, buffers</li></ul><h4>Applications</h4><ul><li>Water soluble proteins, humic substances</li></ul><h3>GPC &amp; SEC Columns</h3>GPC &amp; SEC systems offer solutions for various applications and laboratoriesGel permeation chromatography (GPC) and size exclusion chromatography (SEC) separate analytes by size using special columns with a porous matrix. The basic separation principle is based on the fact that smaller molecules penetrate these pores more strongly and therefore move more slowly through the matrix than larger molecules. GPC/SEC is often used as gentle and powerful purification technique or for quality control in research and development. Typical target molecules are polymers, dissolved in organic solvents for GPC, and macro biomolecules like proteins, antibodies or polysaccharides, dissolved in aqueous eluents for SEC.Separation is facilitated by selecting optimal particle and pore sizes. Therefore we offer a wide range of pore sizes (35, 100, 150, 250, 350, 500, 1000, 1500, 10E5, 10E6, 10E7 Å) and several particle sizes (5, 7, 10, 12, 20 µm) as a choice to customize for every application task.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Size_Exclusion_principle_2a432edcc1.webp" alt="KNAUER: Size Exclusion - principle" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Size_Exclusion_principle_2a432edcc1.webp 228w," sizes="100vw" width="1024" height="700"><h3>KNAUER AppliChrom® ABOA columns for aqueous SEC, organic GPC, and special applications</h3><ul><li>AppliChrom® ABOA StyDiViBe Series GPC-columns for GPC analysis of organic molecules using THF, toluene, chloroform.</li><li>AppliChrom ABOA SuperOH-P Series for aqueous GPC/SEC-analysis of mainly neutral and anionic polymers like heparins, polysaccharides, PEO, PEG,....</li><li>AppliChrom® ABOA DMSO-Phil-P Series for DMSO GPC/SEC analysis (humic substances, UF/MUF-glue, p-NIPA, many polycondensates, protein from pea or leguminosae,...)</li><li>AppliChrom® ABOA DMAc-Phil-P Series for GPC/ SEC analysis in DMAc, DMF, NMP. Good for many medium polar substances, polyoxazolines, lignin,...</li><li>AppliChrom® ABOA Cat-Phil-P Series for aqueous GPC/SEC-analysis of special aminic and polycationic polymers like p-DADMAc, PEI/ polyethylenimin, chitosan, copolymers with polyaminofunctions, but also useful for polyanions or neutral polymers like heparin or PEO/PEG, dextran or pullulan.</li><li>Seperation Ranges: 100–50 000 000 Da</li></ul><h4>You decide between classical GPC/SEC columns with conventional mixed pore technology or AppliChrom® BPT technology:</h4>Separate oligomers and polymers with the new GPC media line from AppliChrom® BPT synthesis technology for large range, high resolution separations with increased accuracy in calibration (patent pending).<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg" alt="KNAUER: AppliChrom® ABOA columns." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg 245w," sizes="100vw" width="1379" height="718">

KNAUER AppliChrom® ABOA Cat-Phil SEC Columns

Interaction-free pure GPC & SEC base material with focus on polycationic, polyelectrolytic or funktional amine analytes

AppliChrom® SEC columns for neutral, anionic and additional cationic polymers<h4>Properties:</h4><ul><li>Interaction-free pure GPC &amp; SEC base material with focus on polycationic, polyelectrolytic or funktional amine analytes</li><li>No salt addition is needed to surpress surface adsorption</li><li>No ion exclusion phenomena</li><li>Possible to be used in universal calibration &amp; accurate molecular weight determination even for small polycationic molecules</li><li>Temperature stability between: 10–90 °C</li><li>Stable with: pH 2–10</li><li>Simple, reliable and robust GPC &amp; SEC calibration from dextrans, pullulans et al.</li><li>Low column bleed for low detector gain for improved refractive index, light scattering or viscosity detection</li><li>Large volume and optimized mass transfer for polymers with optimized resolution</li><li>Low cost due to long column lifetime - result of the combination of optimized particle and packing technology</li><li>Recommended eluents: H₂O, buffers</li></ul><h4>Applications</h4>Water soluble analytes like:<ul><li>polycations, polyamines (chitosanes), polyethylenoxides, polysaccharides, polyanions (heparins, pectins), polyethylene oxide (PEO), polyethylene glycol (PEG), Ppolyethyleneimins (PEI), polyvinylimidazole</li></ul><h3>GPC &amp; SEC Columns</h3>GPC &amp; SEC systems offer solutions for various applications and laboratoriesGel permeation chromatography (GPC) and size exclusion chromatography (SEC) separate analytes by size using special columns with a porous matrix. The basic separation principle is based on the fact that smaller molecules penetrate these pores more strongly and therefore move more slowly through the matrix than larger molecules. GPC/SEC is often used as gentle and powerful purification technique or for quality control in research and development. Typical target molecules are polymers, dissolved in organic solvents for GPC, and macro biomolecules like proteins, antibodies or polysaccharides, dissolved in aqueous eluents for SEC.Separation is facilitated by selecting optimal particle and pore sizes. Therefore we offer a wide range of pore sizes (35, 100, 150, 250, 350, 500, 1000, 1500, 10E5, 10E6, 10E7 Å) and several particle sizes (5, 7, 10, 12, 20 µm) as a choice to customize for every application task.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Size_Exclusion_principle_2a432edcc1.webp" alt="KNAUER: Size Exclusion - principle" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Size_Exclusion_principle_2a432edcc1.webp 228w," sizes="100vw" width="1024" height="700"><h3>KNAUER AppliChrom® ABOA columns for aqueous SEC, organic GPC, and special applications</h3><ul><li>AppliChrom® ABOA StyDiViBe Series GPC-columns for GPC analysis of organic molecules using THF, toluene, chloroform.</li><li>AppliChrom ABOA SuperOH-P Series for aqueous GPC/SEC-analysis of mainly neutral and anionic polymers like heparins, polysaccharides, PEO, PEG,....</li><li>AppliChrom® ABOA DMSO-Phil-P Series for DMSO GPC/SEC analysis (humic substances, UF/MUF-glue, p-NIPA, many polycondensates, protein from pea or leguminosae,...)</li><li>AppliChrom® ABOA DMAc-Phil-P Series for GPC/ SEC analysis in DMAc, DMF, NMP. Good for many medium polar substances, polyoxazolines, lignin,...</li><li>AppliChrom® ABOA Cat-Phil-P Series for aqueous GPC/SEC-analysis of special aminic and polycationic polymers like p-DADMAc, PEI/ polyethylenimin, chitosan, copolymers with polyaminofunctions, but also useful for polyanions or neutral polymers like heparin or PEO/PEG, dextran or pullulan.</li><li>Seperation Ranges: 100–50 000 000 Da</li></ul><h4>You decide between classical GPC/SEC columns with conventional mixed pore technology or AppliChrom® BPT technology:</h4>Separate oligomers and polymers with the new GPC media line from AppliChrom® BPT synthesis technology for large range, high resolution separations with increased accuracy in calibration (patent pending).<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg" alt="KNAUER: AppliChrom® ABOA columns." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg 245w," sizes="100vw" width="1379" height="718">

KNAUER AppliChrom® ABOA StyDiViBe GPC Columns

Organic polystyrene-divinylbenzene copolymer base material with high porosity for high resolution

AppliChrom® GPC columns for GPC analysis of organic molecules with THF, toluene, chloroform<h4>Properties:</h4><ul><li>Organic polystyrene-divinylbenzene copolymer base material with high porosity for high resolution</li><li>High pressure stability: up to 150 bar</li><li>Temperature stable: between 10-145 °C</li><li>GPC range: from 0.1 up to 50 000 kDa</li><li>Low column bleed for low detector noise</li><li>High purity to eliminate adsorptive effects and combine pure GPC with long lifetime</li><li>Large calibration ranges for several decades due to the unique process of BPT technology</li><li>Range of individual porosities that can be used individually or in combination</li><li>Optimized for: 1 ml/min flow rate for 8 mm ID columns</li><li>High level of reproducibility and peak precision due to the advanced packing procedure</li><li>Recommended eluents: THF, Toluene, CHCl₃, dichlorbenzene, hexane/EtOAc (10:90, V:V)</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Appli_Chrom_ABOA_Sty_Di_Vi_Be_P_Molecular_sizes_range_ca9a682d2e.jpg" alt="KNAUER: AppliChrom® ABOA StyDiViBe-P - Molecular sizes range" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Appli_Chrom_ABOA_Sty_Di_Vi_Be_P_Molecular_sizes_range_ca9a682d2e.jpg 235w," sizes="100vw" width="1072" height="712"><h4>Applications</h4>Hydrophobic oligomers or polymers like:<ul><li>PVC, PMMA, polystyrene, epoxy resins, polyesters, bisphenol A resins</li></ul><h3>GPC &amp; SEC Columns</h3>GPC &amp; SEC systems offer solutions for various applications and laboratoriesGel permeation chromatography (GPC) and size exclusion chromatography (SEC) separate analytes by size using special columns with a porous matrix. The basic separation principle is based on the fact that smaller molecules penetrate these pores more strongly and therefore move more slowly through the matrix than larger molecules. GPC/SEC is often used as gentle and powerful purification technique or for quality control in research and development. Typical target molecules are polymers, dissolved in organic solvents for GPC, and macro biomolecules like proteins, antibodies or polysaccharides, dissolved in aqueous eluents for SEC.Separation is facilitated by selecting optimal particle and pore sizes. Therefore we offer a wide range of pore sizes (35, 100, 150, 250, 350, 500, 1000, 1500, 10E5, 10E6, 10E7 Å) and several particle sizes (5, 7, 10, 12, 20 µm) as a choice to customize for every application task.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Size_Exclusion_principle_2a432edcc1.webp" alt="KNAUER: Size Exclusion - principle" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Size_Exclusion_principle_2a432edcc1.webp 228w," sizes="100vw" width="1024" height="700"><h3>KNAUER AppliChrom® ABOA columns for aqueous SEC, organic GPC, and special applications</h3><ul><li>AppliChrom® ABOA StyDiViBe Series GPC-columns for GPC analysis of organic molecules using THF, toluene, chloroform.</li><li>AppliChrom ABOA SuperOH-P Series for aqueous GPC/SEC-analysis of mainly neutral and anionic polymers like heparins, polysaccharides, PEO, PEG,....</li><li>AppliChrom® ABOA DMSO-Phil-P Series for DMSO GPC/SEC analysis (humic substances, UF/MUF-glue, p-NIPA, many polycondensates, protein from pea or leguminosae,...)</li><li>AppliChrom® ABOA DMAc-Phil-P Series for GPC/ SEC analysis in DMAc, DMF, NMP. Good for many medium polar substances, polyoxazolines, lignin,...</li><li>AppliChrom® ABOA Cat-Phil-P Series for aqueous GPC/SEC-analysis of special aminic and polycationic polymers like p-DADMAc, PEI/ polyethylenimin, chitosan, copolymers with polyaminofunctions, but also useful for polyanions or neutral polymers like heparin or PEO/PEG, dextran or pullulan.</li><li>Seperation Ranges: 100–50 000 000 Da</li></ul><h4>You decide between classical GPC/SEC columns with conventional mixed pore technology or AppliChrom® BPT technology:</h4>Separate oligomers and polymers with the new GPC media line from AppliChrom® BPT synthesis technology for large range, high resolution separations with increased accuracy in calibration (patent pending).<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg" alt="KNAUER: AppliChrom® ABOA columns." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg 245w," sizes="100vw" width="1379" height="718">

KNAUER AppliChrom® ABOA DMAc-Phil GPC Columns

Organic polymer base material with high porosity for high resolution

AppliChrom® GPC columns for organic GPC analyses in DMAc or DMF<h4>Properties:</h4><ul><li>Organic polymer base material with high porosity for high resolution</li><li>Wide range of porosities and particle sizes</li><li>Pressure stability: up to 150 bar</li><li>Stable between: 35-145 °C</li><li>Excellent reproducibility and resolution due to the advanced packing procedure</li><li>High purity to eliminate adsorptive effects and combine pure GPC with long lifetime</li><li>GPC range from: 100-1 000 000 Da</li><li>Optimal for: 0.5 ml/min flow rates with 8 mm ID colums</li><li>Recommended eluents: DMAc, DMF, NMP, LiBr additive</li></ul><h4>Applications</h4>Slightly polar analytes like:<ul><li>PMMA, polyacryl nitril (PAN), acrylnitrile butadiene styrene (ABS), cellulose, and all DMF and DMAc soluble polymers</li></ul><h3>GPC &amp; SEC Columns</h3>GPC &amp; SEC systems offer solutions for various applications and laboratoriesGel permeation chromatography (GPC) and size exclusion chromatography (SEC) separate analytes by size using special columns with a porous matrix. The basic separation principle is based on the fact that smaller molecules penetrate these pores more strongly and therefore move more slowly through the matrix than larger molecules. GPC/SEC is often used as gentle and powerful purification technique or for quality control in research and development. Typical target molecules are polymers, dissolved in organic solvents for GPC, and macro biomolecules like proteins, antibodies or polysaccharides, dissolved in aqueous eluents for SEC.Separation is facilitated by selecting optimal particle and pore sizes. Therefore we offer a wide range of pore sizes (35, 100, 150, 250, 350, 500, 1000, 1500, 10E5, 10E6, 10E7 Å) and several particle sizes (5, 7, 10, 12, 20 µm) as a choice to customize for every application task.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Size_Exclusion_principle_2a432edcc1.webp" alt="KNAUER: Size Exclusion - principle" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Size_Exclusion_principle_2a432edcc1.webp 228w," sizes="100vw" width="1024" height="700"><h3>KNAUER AppliChrom® ABOA columns for aqueous SEC, organic GPC, and special applications</h3><ul><li>AppliChrom® ABOA StyDiViBe Series GPC-columns for GPC analysis of organic molecules using THF, toluene, chloroform.</li><li>AppliChrom ABOA SuperOH-P Series for aqueous GPC/SEC-analysis of mainly neutral and anionic polymers like heparins, polysaccharides, PEO, PEG,....</li><li>AppliChrom® ABOA DMSO-Phil-P Series for DMSO GPC/SEC analysis (humic substances, UF/MUF-glue, p-NIPA, many polycondensates, protein from pea or leguminosae,...)</li><li>AppliChrom® ABOA DMAc-Phil-P Series for GPC/ SEC analysis in DMAc, DMF, NMP. Good for many medium polar substances, polyoxazolines, lignin,...</li><li>AppliChrom® ABOA Cat-Phil-P Series for aqueous GPC/SEC-analysis of special aminic and polycationic polymers like p-DADMAc, PEI/ polyethylenimin, chitosan, copolymers with polyaminofunctions, but also useful for polyanions or neutral polymers like heparin or PEO/PEG, dextran or pullulan.</li><li>Seperation Ranges: 100–50 000 000 Da</li></ul><h4>You decide between classical GPC/SEC columns with conventional mixed pore technology or AppliChrom® BPT technology:</h4>Separate oligomers and polymers with the new GPC media line from AppliChrom® BPT synthesis technology for large range, high resolution separations with increased accuracy in calibration (patent pending).<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg" alt="KNAUER: AppliChrom® ABOA columns." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg 245w," sizes="100vw" width="1379" height="718">

KNAUER AppliChrom® ABOA DMSO-Phil GPC Columns

AppliChrom® DMSO-PHIL optimized for DMSO-GPC applications from an interaction-free pure GPC base material

AppliChrom® DMSO-PHIL optimized for DMSO-GPC applications<h4>Properties:</h4><ul><li>Interaction-free pure GPC base material</li><li>Temperature stabel between: 40-90 °C (145 °C) depending on application</li><li>Simple, reliable and robust GPC &amp; SEC calibration from dextrans, pullulans et al.</li><li>Low column bleed for low detector gain for improved refractive index, light scattering or viscosity detection</li><li>12 µm particle technology for low back pressure</li><li>Tolerates traces of water and NaNO₃ additve</li><li>Large volume and optimized mass transfer for polymers with optimized resolution</li><li>Low cost due to long column lifetime - result of the combination of optimized particle and packing technology</li><li>Recommended eluents: DMSO, 0.075 M NaNO₃</li></ul><h4>Applications</h4>Polar, not water soluble oligomers or polymers like:<ul><li>polysaccharides, lignin, amylose, starch, humic acids, polyvenyl pyridin, PNIPA, polyvinyl alcohol (PVA), melamin-urea-formaldehyd resin (MUF) or urea-formaldehyd resin (UF)</li></ul><h3>GPC &amp; SEC Columns</h3>GPC &amp; SEC systems offer solutions for various applications and laboratoriesGel permeation chromatography (GPC) and size exclusion chromatography (SEC) separate analytes by size using special columns with a porous matrix. The basic separation principle is based on the fact that smaller molecules penetrate these pores more strongly and therefore move more slowly through the matrix than larger molecules. GPC/SEC is often used as gentle and powerful purification technique or for quality control in research and development. Typical target molecules are polymers, dissolved in organic solvents for GPC, and macro biomolecules like proteins, antibodies or polysaccharides, dissolved in aqueous eluents for SEC.Separation is facilitated by selecting optimal particle and pore sizes. Therefore we offer a wide range of pore sizes (35, 100, 150, 250, 350, 500, 1000, 1500, 10E5, 10E6, 10E7 Å) and several particle sizes (5, 7, 10, 12, 20 µm) as a choice to customize for every application task.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Size_Exclusion_principle_2a432edcc1.webp" alt="KNAUER: Size Exclusion - principle" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Size_Exclusion_principle_2a432edcc1.webp 228w," sizes="100vw" width="1024" height="700"><h3>KNAUER AppliChrom® ABOA columns for aqueous SEC, organic GPC, and special applications</h3><ul><li>AppliChrom® ABOA StyDiViBe Series GPC-columns for GPC analysis of organic molecules using THF, toluene, chloroform.</li><li>AppliChrom ABOA SuperOH-P Series for aqueous GPC/SEC-analysis of mainly neutral and anionic polymers like heparins, polysaccharides, PEO, PEG,....</li><li>AppliChrom® ABOA DMSO-Phil-P Series for DMSO GPC/SEC analysis (humic substances, UF/MUF-glue, p-NIPA, many polycondensates, protein from pea or leguminosae,...)</li><li>AppliChrom® ABOA DMAc-Phil-P Series for GPC/ SEC analysis in DMAc, DMF, NMP. Good for many medium polar substances, polyoxazolines, lignin,...</li><li>AppliChrom® ABOA Cat-Phil-P Series for aqueous GPC/SEC-analysis of special aminic and polycationic polymers like p-DADMAc, PEI/ polyethylenimin, chitosan, copolymers with polyaminofunctions, but also useful for polyanions or neutral polymers like heparin or PEO/PEG, dextran or pullulan.</li><li>Seperation Ranges: 100–50 000 000 Da</li></ul><h4>You decide between classical GPC/SEC columns with conventional mixed pore technology or AppliChrom® BPT technology:</h4>Separate oligomers and polymers with the new GPC media line from AppliChrom® BPT synthesis technology for large range, high resolution separations with increased accuracy in calibration (patent pending).<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg" alt="KNAUER: AppliChrom® ABOA columns." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg 245w," sizes="100vw" width="1379" height="718">

KNAUER AppliChrom® ABOA HFIP-Phil GPC Columns

AppliChrom® GPC columns for separations in HFIP with broad pore technology for GPC for analytes with challenging solution behavior

AppliChrom® GPC columns for separations in HFIP<h4>Properties:</h4><ul><li>Broad pore technology for GPC for analytes with challenging solution behavior</li><li>Separation range beween: 0.1–50 000 kDa</li><li>Range of individual porosities that can be used individually or in combination</li><li>Temperature stable between: 35–145 °C</li><li>Long column lifetime - result of the combination of optimized particle and packing technology</li><li>Low column bleed for low detector noise</li><li>Excellent reproducibility and resolution due to the advanced packing procedure</li><li>Calibration standard: PMMA or PEO &nbsp;</li><li>Recommended eluents: Hexafluoroisopropanol (HFIP), 0.1 % KTFa as modifier</li></ul><h4>Applications</h4>Crystalline highperformance polymers like:&nbsp;<ul><li>polyamides (PA), polyethylen terepthalate (PET), polybutylen terepthalate (PBT), polylactic acid (PLA), polyamid 6 (PA6), polycaprolactam, paraformaldehyde, polyoxymethylene (POM), polyacetal, several polyoxazolines</li></ul><h3>GPC &amp; SEC Columns</h3>GPC &amp; SEC systems offer solutions for various applications and laboratoriesGel permeation chromatography (GPC) and size exclusion chromatography (SEC) separate analytes by size using special columns with a porous matrix. The basic separation principle is based on the fact that smaller molecules penetrate these pores more strongly and therefore move more slowly through the matrix than larger molecules. GPC/SEC is often used as gentle and powerful purification technique or for quality control in research and development. Typical target molecules are polymers, dissolved in organic solvents for GPC, and macro biomolecules like proteins, antibodies or polysaccharides, dissolved in aqueous eluents for SEC.Separation is facilitated by selecting optimal particle and pore sizes. Therefore we offer a wide range of pore sizes (35, 100, 150, 250, 350, 500, 1000, 1500, 10E5, 10E6, 10E7 Å) and several particle sizes (5, 7, 10, 12, 20 µm) as a choice to customize for every application task.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Size_Exclusion_principle_2a432edcc1.webp" alt="KNAUER: Size Exclusion - principle" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Size_Exclusion_principle_2a432edcc1.webp 228w," sizes="100vw" width="1024" height="700"><h3>KNAUER AppliChrom® ABOA columns for aqueous SEC, organic GPC, and special applications</h3><ul><li>AppliChrom® ABOA StyDiViBe Series GPC-columns for GPC analysis of organic molecules using THF, toluene, chloroform.</li><li>AppliChrom ABOA SuperOH-P Series for aqueous GPC/SEC-analysis of mainly neutral and anionic polymers like heparins, polysaccharides, PEO, PEG,....</li><li>AppliChrom® ABOA DMSO-Phil-P Series for DMSO GPC/SEC analysis (humic substances, UF/MUF-glue, p-NIPA, many polycondensates, protein from pea or leguminosae,...)</li><li>AppliChrom® ABOA DMAc-Phil-P Series for GPC/ SEC analysis in DMAc, DMF, NMP. Good for many medium polar substances, polyoxazolines, lignin,...</li><li>AppliChrom® ABOA Cat-Phil-P Series for aqueous GPC/SEC-analysis of special aminic and polycationic polymers like p-DADMAc, PEI/ polyethylenimin, chitosan, copolymers with polyaminofunctions, but also useful for polyanions or neutral polymers like heparin or PEO/PEG, dextran or pullulan.</li><li>Seperation Ranges: 100–50 000 000 Da</li></ul><h4>You decide between classical GPC/SEC columns with conventional mixed pore technology or AppliChrom® BPT technology:</h4>Separate oligomers and polymers with the new GPC media line from AppliChrom® BPT synthesis technology for large range, high resolution separations with increased accuracy in calibration (patent pending).<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg" alt="KNAUER: AppliChrom® ABOA columns." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg 245w," sizes="100vw" width="1379" height="718">

Products from category HPLC columns focused on GPC/SEC from KNAUER - page 1

Related content

Unlocking Phytoplankton Metallomes with Comparative Analysis of Metal Quotas, Quantitative Proteomics, and Inferred Metalloproteomes

Imaging of Protein Assemblies up to 231 kDa in Tissues with Nano-DESI Mass Spectrometry

Webinars LabRulezLCMS Week 08/2026