Pesticides and biocides are widely used in agriculture, building materials, and urban gardening to control pests and protect crops and public health. While much attention has been paid to pesticide residues in food, water, and outdoor environments, far less is known about their presence inside homes, where people spend the majority of their time. A new RECETOX study published in Indoor Environments addresses this gap by examining pesticides detected in house dust and their relevance for human exposure.&nbsp;The study reveals that Czech household dust commonly contains multiple pesticide residues, highlighting the persistence of both historic and current chemical use indoors. Modern pesticides were detected in 93% of homes, with two fungicides (carbendazim and propiconazole) most frequently found, while compounds related to the long‑banned pesticide DDT were present in dust from all homes, and were at higher levels in homes over 40 years old. Homes located closer to agricultural areas showed higher levels of current‑use pesticides in spring, indicating an influence of nearby farming activities. &nbsp;House dust acts as a sink for chemicals transported indoors from outdoor sources as well as from indoor use. Many pesticides can persist in dust for long periods, leading to continuous exposure in indoor spaces. This is particularly important for young children, who have higher exposure to dust from playing on the floor and mouthing toys and objects. The research underscores that indoor environments are not isolated from their surroundings. Understanding what ends up in house dust is a crucial step toward protecting public health and developing more comprehensive approaches to managing chemical risks in everyday life.&nbsp;<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/RECETOX_Vyzkum_pesticidu_v_domacim_prachu_opomijena_cesta_lidske_expozice_a9a089fd2f.jpg" alt="RECETOX: Pesticides in House Dust: An Overlooked Pathway of Human Exposure" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_RECETOX_Vyzkum_pesticidu_v_domacim_prachu_opomijena_cesta_lidske_expozice_a9a089fd2f.jpg 195w," sizes="100vw" width="738" height="591"><blockquote><h4>Original Article</h4><h4><a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S2950362026000214?via%3Dihub">Legacy and current-use pesticides in indoor settled dust and association with building age and seasonality</a></h4>Paula Marcinekova, Ondřej Mikeš, Simona Rozárka Jílková, Petr Šenk, Jakub Martiník, Jan Böhm, Petra Borilova Linhartova, Lenka Andrýsková, Jana Klánová, Lisa MelymukIndoor Environ., 2026, 3, 100169<a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1016/j.indenv.2026.100169">https://doi.org/10.1016/j.indenv.2026.100169</a>&nbsp;<h6>licensed under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/">CC-BY 4.0</a></h6></blockquote><h4>Abstract</h4>Indoor pesticide exposure is increasingly recognized as a significant contributor to pollutant exposure in residential spaces. This study investigates concentrations of legacy organochlorine pesticides (OCPs) and current-use pesticides (CUPs) in settled dust from 116 homes in the Czech Republic, in the context of their seasonal variability, relationships with building characteristics, geospatial factors, and indoor dust bacteriome diversity and composition. CUPs were detected in dust in 93% of homes, with carbendazim (84.5%), propiconazole (49.1%), atrazine (24.1%), and tebuconazole (11.2%) detected most frequently. OCPs were found in all homes. Propiconazole concentrations were significantly higher in homes with adjacent gardens, potentially reflecting its use as a biocide in outdoor building materials. CUP concentrations had clear seasonal trends, with peak levels in spring and summer, corresponding to pesticide application periods, particularly in rural environments. OCP concentrations were substantially higher in houses over 40 years old, indicating the persistence of residues from past indoor uses. While pesticide presence was ubiquitous, exposure estimates for children, under both average and high-exposure scenarios, were well below U.S. EPA reference doses (RfDs) for individual compounds; however, most homes had 3–11 pesticides in dust, raising the possibility of mixture effects. No significant associations, using a Spearman rank correlation matrix, were observed between pesticide concentrations and indoor dust bacteriome diversity and composition. These findings highlight the presence of pesticides in homes, including those in urban areas, driven by both current and historical sources, and reinforce the importance of monitoring to better understand potential exposure pathways.<h4>Instrumentation</h4><h5>1. LC–MS/MS analysis of CUPs</h5><ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?instrumentationItems=27&amp;mainauthorItems=10&amp;search=1290+Series+Gradient">Agilent 1290 Series Gradient HPLC</a></li><li>Columns:<ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1701">Phenomenex Luna C18</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?instrumentationItems=34&amp;mainauthorItems=50&amp;search=SecurityGuard+C18">Phenomenex SecurityGuard C18</a></li></ul></li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=55&amp;search=QTrap+5500%2B">SCIEX QTrap 5500+</a> (triple quadrupole MS, ESI+)</li></ul><h5>2. GC–MS/MS analysis of OCPs</h5><ul><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?instrumentationItems=1&amp;mainauthorItems=10&amp;search=8890A">Agilent 8890A GC</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?instrumentationItems=19&amp;mainauthorItems=7&amp;search=Rxi-5Sil-MS">Restek Rxi-5Sil-MS capillary column</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=10&amp;search=7000D">Agilent 7000D triple quadrupole MS</a></li></ul>

Pesticides in House Dust: An Overlooked Pathway of Human Exposure

This technical note presents a practical troubleshooting strategy for one of the most common issues in liquid chromatography (LC): shifting retention times. The approach is based on a systematic distinction between system-related (physical) and chromatographic (chemical) causes.A key diagnostic parameter used throughout the process is the T₀ (dead time), representing an unretained peak that passes through the column without interaction.<h3>Key Concept: T₀ (Dead Time / Unretained Peak)</h3>T₀ is defined as the retention time of a compound that does not interact with the stationary phase and therefore elutes directly with the mobile phase.<h4>How to Determine T₀</h4>T₀ can be determined experimentally by adding a marker compound to the system:<ul><li>Uracil</li><li>Potassium nitrate</li></ul>These compounds are added to a blank or method and produce a measurable unretained peak used for troubleshooting.<h3>Step 1: Evaluate T₀ Behavior</h3>The first and most important step is to determine whether T₀ is constant or variable.<ul><li>Case A: T₀ is Variable (Shifting) → Indicates a system-related (physical) problem &nbsp;</li><li>Case B: T₀ is Constant → Indicates a chromatographic or chemical problem</li></ul><h3>System-Related Issues (T₀ is Variable)</h3>If T₀ is shifting, the problem is likely related to the LC system hardware or physical parameters. This is especially true when all peaks shift together in the chromatogram.<h3>Possible Causes</h3><ul><li>Incorrect Flow Rate</li><li>Pump Malfunction<ul><li>Inconsistent or unstable flow delivery can cause retention time variability.</li></ul></li><li>Incorrect Column Length<ul><li>Using a column with different dimensions than expected.</li></ul></li><li>Solvent Delivery Issues<ul><li>Empty solvent reservoir (system running dry)</li><li>Blockages or restrictions (e.g., frits, solvent lines)</li></ul></li><li>Tubing or System Volume Changes<ul><li>Changes in tubing configuration</li><li>Differences in system dwell (swell) volume</li></ul></li></ul><h3>Chromatographic / Chemical Issues (T₀ is Constant)</h3>If T₀ remains stable but only specific peaks shift, the issue is likely related to chemistry or column conditions.<h4>Possible Causes</h4><ul><li>Incorrect Stationary Phase<ul><li>Column with same dimensions but different chemistry (e.g., different silica or bonded phase)</li></ul></li><li>Ionizable Analytes Ionizable compounds exist in:<ul><li>Neutral form - More hydrophobic, retained longer on a reversed-phase column</li><li>Ionized form</li></ul>Impact of pH Small pH changes in the mobile phase can significantly affect:<ul><li>Ionization state</li><li>Retention time of specific analytes</li></ul></li><li>Mobile Phase Issues<ul><li>Old solvents</li><li>Evaporation of volatile components</li><li>Changes in composition</li></ul></li><li>4. Temperature Variations<ul><li>Temperature affects analyte–stationary phase interactions</li><li>Even small fluctuations can shift retention times</li></ul></li></ul><h3>Step-by-Step Troubleshooting Workflow</h3><ol><li>Add T₀ Marker<ol><li>Use uracil or potassium nitrate</li></ol></li><li>Monitor T₀<ol><li>Determine whether it is constant or shifting</li></ol></li><li>If T₀ is Variable → Check System<ol><li>Flow rate settings</li><li>Pump performance</li><li>Solvent levels and lines</li><li>Column dimensions</li><li>Tubing and system volume</li></ol></li><li>If T₀ is Constant → Check Chemistry<ol><li>Column phase</li><li>Mobile phase composition and pH</li><li>Solvent quality</li><li>Temperature stability</li><li>Nature of analytes (ionizable vs. non-ionizable)</li></ol></li></ol><h3>Discussion and Practical Insight</h3>This troubleshooting approach simplifies a complex problem by dividing it into two main categories:<ul><li>Physical/system-related</li><li>Chemical/chromatographic</li></ul>The use of T₀ as a diagnostic tool allows rapid identification of the problem origin, reducing unnecessary trial-and-error steps.Particular attention should be paid to ionizable compounds, as they are highly sensitive to pH variations, which can lead to significant and selective retention time shifts.<h3>Conclusion</h3>Retention time shifts in LC can be efficiently diagnosed by evaluating the behavior of the T₀ (unretained peak):<ul><li>Variable T₀ → System issue</li><li>Constant T₀ → Chromatographic/chemical issue</li></ul>By following this structured approach, analysts can quickly narrow down the root cause and implement targeted corrective actions.

Troubleshooting Retention Time Shifts in Liquid Chromatography 

News from LabRulezLCMS Library - Week 18, 2026

Article

Application

Academy

Health

Science and research

Video

RECETOX (Research Centre for Toxic Compounds in the Environment) is an independent department of the Faculty of Science of Masaryk University in Brno, which has been established in 1983. RECETOX is focused on the research and education in cross-cutting area of Environment and Health. It addresses interactions among chemicals, environment, and biological systems, including consequences at local, regional, and global levels.

RECETOX - Centrum pro výzkum toxických látek v prostředí

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Phenomenex is a global technology leader committed to developing novel analytical chemistry solutions that solve the separation and purification challenges of researchers in industrial, government and academic laboratories.

Phenomenex

Waters/Wyatt DAWN™ Multi Angle Light Scattering (MALS) Detector

The world's most advanced light scattering instrument for absolute characterization of proteins, conjugates, macromolecules, and nanoparticles.

<h5>Premier MALS</h5>The DAWN instrument is the premier Multi-Angle static Light Scattering (MALS) detector for absolute characterization of the molar mass and size of macromolecules and nanoparticles in solution. It offers the highest sensitivity, the widest range of molecular weight, size, and concentration, and the largest selection of configurations and optional modules for enhanced capabilities.<h5>Separation First</h5>MALS is most often used in conjunction with a separation system such as Gel Permeation Chromatography (GPC-MALS), Size Exclusion Chromatography (SEC-MALS), or Field-Flow Fractionation (FFF-MALS) to determine distributions of mass, size, and composition, independent of column calibration by reference standards.<h5>Supported by ASTRA ™ &nbsp;Software</h5>ASTRA Software and its built-in analysis modules support the DAWN MALS instrument, providing the most versatile analysis available for online multi-angle and dynamic light scattering measurements.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_DAWN_MALS_HPLC_detektor_konfigurace_d5b83e46b2.jpg" alt="Waters DAWN™ Multi Angle Light Scattering (MALS) Instrument: ASTRA Software" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_DAWN_MALS_HPLC_detektor_konfigurace_d5b83e46b2.jpg 245w," sizes="100vw" width="1500" height="807"><h4>Product description</h4>The DAWN and its companion Optilab ™ &nbsp;dRI detector are the established benchmarks for MALS analysis, cited in thousands of peer-reviewed publications. Multi-angle light scattering detection is indispensable for use with GPC and HPLC-SEC in order to obtain reliable molecular mass distributions and information on molecular conformation, branching ratio, fragments and aggregates.SEC-MALS with a DAWN and Optilab characterizes conformation and branching of synthetic and natural polymers larger than 10 nm in rms radius R g . The addition of a ViscoStar ™&nbsp; differential viscometer creates a GPC triple-detection system that can analyze molecular conformation and size below the R g &nbsp;limit of 10 nm and determine Mark-Houwink Sakurada coefficients.The combination of a UV/Vis absorbance detector with a DAWN instrument and Optilab refractive index detector creates a UV-MALS-RI triple-detection system, for analysis of copolymers and protein conjugates (glycoproteins, PEGylated proteins, surfactant-bound membrane proteins, etc.). With the addition of a WyattQELS ™ &nbsp;DLS module for size determination, protein conformation may be analyzed.<ul><li>Mw &nbsp;from 200 Da to 1000 MDa</li><li>Sensitivity: 10 ng/mL 100 kDa polystyrene in THF, 0.4 µg/mL BSA (66.4 kDa) in PBS</li><li>Rg &nbsp;from 10 to 500 nm, up to 1000 nm with shape-specific models</li><li>Ultra-stable, high-power laser</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_DAWN_MALS_HPLC_detektor_konfigurace_1_98811a1e87.jpg" alt="Waters DAWN™ Multi Angle Light Scattering (MALS) Instrument: Accessories" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_DAWN_MALS_HPLC_detektor_konfigurace_1_98811a1e87.jpg 213w," sizes="100vw" width="1000" height="733">The DAWN may also be used in batch (off-line) mode to characterize the weight-average molar mass, z-average size and second virial coefficient of unfractionated samples.In conjunction with a Calypso ™ &nbsp;CG-MALS system, the DAWN characterizes macromolecular interactions, label-free and immobilization-free: affinity and absolute stoichiometry of self- and hetero-association of simple or complex molecular systems. The Calypso system also automates the determination of second virial coefficients, cross virial coefficients, average molar masses and sizes.<h5>Ultrasonic Cleaning Included</h5>Each DAWN instrument includes an embedded COMET ™ &nbsp;ultrasonic transducer that cleans the flow cell automatically by agitating the fluid and loosening particles from the glass surfaces.<h5>Temperature-Controlled Models</h5><ul><li>Ambient model</li><li>Ultra-High-Temperature (UHT) model, from ambient up to +210 °C</li><li>Standard Peltier heated/cooled (H/C) model, temperature control from -15 °C to +150 °C</li></ul><h4>Specifications</h4><h5>Measurement Capabilities</h5><ul><li>Molar Mass Range: From 200 Da to 1 GDa, depending on dn/dc, sample concentration, and chromatography conditions.</li><li>Molecular Size (Radius of Gyration, Rg): Approximately 10 nm to 500 nm, extendable to 1000 nm with shape-specific models.</li><li>Hydrodynamic Radius (Rh):<ul><li>Flow mode: 0.5 nm to 300 nm (depending on configuration and flow rate).</li><li>Batch mode: 0.5 nm to 1 µm (requires WyattQELS™ DLS module or DynaPro™ NanoStar™ with fiber optic connection).</li></ul></li><li>Sensitivity: Detects as little as 10 ng of 100 kDa polystyrene in THF or 200 ng of BSA in PBS, using a standard 7.8 mm x 300 mm SEC column and no post-column filter.</li></ul><h5>Fluidics and Compatibility</h5><ul><li>Mobile Phase: Compatible with both aqueous and organic solvents.</li><li>Wetted Materials: 316 stainless steel, fused silica or F2 glass, and Kalrez.</li></ul><h5>Optical System and Detectors</h5><ul><li>MALS Detectors: 18 photodiodes with high gain and wide dynamic range for multi-angle light scattering.</li><li>Auxiliary Detectors:<ul><li>Laser monitor for stabilization</li><li>Forward transmission monitor to improve data quality and correct for sample absorption</li></ul></li><li>Dynamic Range: 3,300,000:1</li><li>Optional DLS Detection:<ul><li>Integrated WyattQELS™ module inside the DAWN</li><li>External fiber optic connection with DynaPro NanoStar or Mobius DLS-ELS instruments</li></ul></li></ul><h5>Laser Specifications</h5><ul><li>Wavelength: Standard 658 nm ± 4 nm; optional 785 nm for fluorescent samples</li><li>Power Control: Programmable from 10% to 100%</li></ul><h5>Flow Cell Options</h5><ul><li>Fused Silica: Ideal for solvents with refractive index &lt; 1.50</li><li>F2 Glass: Recommended for solvents with refractive index &gt; 1.50</li></ul><h5>Temperature Control Options</h5><ul><li>Ambient operation</li><li>Heated/Cooled (HC): -15 °C to +150 °C</li><li>Ultra-High Temperature (UHT): Ambient to +210 °C</li></ul><h5>Electronics and Connectivity</h5><ul><li>Analog Inputs: 4 differential inputs, 24-bit resolution, range -10 V to +10 V</li><li>Analog Outputs: 2 outputs from selectable measurement channels, -10 V to +10 V</li><li>I/O Options: Alarm in/out, auto-inject control, and Orbit™ valve integration</li><li>Computer Interface: Ethernet</li><li>Display: 10.1” high-resolution capacitive touchscreen with multi-touch controls</li></ul><h5>Instrument Dimensions</h5><ul><li>Size: 58 cm (L) x 36 cm (W) x 26 cm (H)</li></ul><h4>Other MALS Instruments</h4><ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1115">miniDAWN™</a> &nbsp;- Second only to the DAWN in sensitivity. Incorporates detectors at 3 angles to determine molar masses from 200 Da to 10 MDa and radii from 10 – 50 nm. Ambient only.</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1116">microDAWN™</a>&nbsp; - The first MALS detector for UHPLC, with interdetector dispersion as low as 1.5 µL. Incorporates detectors at 3 angles to determine molar masses from 200 Da to 20 MDa and radii from 10 – 50 nm. Ambient only.</li><li>ultraDAWN™ &nbsp;- Measures multi-angle light scattering and reports the results – weight-average molecular weight Mw &nbsp;and rms radius Rg &nbsp;– in real time.</li></ul>

Waters/Wyatt miniDAWN™ Multi Angle Light Scattering (MALS) Detector

The Best in Basic Multi-Angle Light Scattering for Absolute Macromolecular Analysis.

<h4>Overview</h4><h5>Molar Mass</h5>The miniDAWN determines absolute molar mass and size to characterize proteins, peptides, small polymers and nanoparticles in solution. Coupled to size exclusion chromatography (SEC or GPC), it eliminates the uncertainty and hassle of column calibration, for true confidence in macromolecular characterization.<h5>Superb Sensitivity</h5>The miniDAWN not only offers superb sensitivity—it further enhances productivity thanks to greatly enhanced field serviceability and easy data analysis with One-Click Mw™ .<h5>Compatible with ASTRA™&nbsp;</h5>The miniDAWN is accompanied by ASTRA, the most versatile software package available for analysis of online multi-angle and dynamic light scattering. ASTRA and the miniDAWN incorporate advanced ease-of-use features that help guarantee excellent measurements with a single click.<h4>Product Description</h4><h5>Molar mass, absolutely</h5>Wyatt's miniDAWN is most often used in conjunction with size exclusion chromatography (SEC-MALS) or field-flow fractionation (FFF-MALS) to determine distributions of molecular weight, size and composition. No need to make assumptions about molecular conformation or ideal column interactions.<h5>Characterize:</h5><ul><li>Proteins, small peptides and oligonucleotides</li><li>Synthetic and natural polymers</li><li>Nanoparticles, virus-like particles and vesicles</li></ul><h5>Measurement Range:</h5><ul><li>MW from 200 Da to 10 MDa</li><li>rg &nbsp;from 10 to 50 nm, up to 150 nm with shape-specific models</li><li>sensitivity down to 25 ng of 100 kDa polystyrene in THF, injected on a standard GPC column</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_Mini_DAWN_urcuje_molekulovou_hmotnost_nezavisle_na_kalibraci_kolony_Zde_MALS_ukazuje_ze_nejdrive_eluujici_molekula_nema_nejvyssi_molarni_hmotnost_509e5530ea.jpg" alt="Waters: The miniDAWN determines molecular weight independently of column calibration. Here MALS shows that the earliest-eluting molecule does not have the highest molar mass." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_Mini_DAWN_urcuje_molekulovou_hmotnost_nezavisle_na_kalibraci_kolony_Zde_MALS_ukazuje_ze_nejdrive_eluujici_molekula_nema_nejvyssi_molarni_hmotnost_509e5530ea.jpg 245w," sizes="100vw" width="820" height="438">The miniDAWN's performance is exceeded only by the DAWN™ which covers a wider range of size and molecular weight, with even better sensitivity and additional optional modules.<h5>Ultrasonic Cleaning Included</h5>Each miniDAWN includes an embedded COMET™ ultrasonic transducer that cleans the flow cell automatically by agitating the fluid and loosening particles from the glass surfaces.<h5>Modularity = Productivity</h5>The miniDAWN incorporates a fully modular design. Each module can be tested independently by the software to verify that it is functioning correctly. This imparts nearly complete field serviceability, since malfunctioning modules can be replaced and validated on-site by service engineers with no further calibration or alignment.The miniDAWN is also field-upgradeable: the embedded WyattQELS™ DLS Module for measuring hydrodynamic radii from 0.5 to 50 nm can be installed on-site as well as in new units shipped from the factory.<h5>Not just SEC-MALS...</h5>Wyatt's miniDAWN may be used in batch (off-line) mode or in conjunction with a Calypso™ CG-MALS system for characterization of average solution properties as well as macromolecular interaction properties including protein-protein binding affinity and complex stoichiometry.<h5>Simplicity personified</h5>With miniDAWN and ASTRA™, SEC-MALS became a whole lot easier. Sample-specific methods are set up in three short steps with ASTRA's Method Wizard, and new capabilities for automatic data processing mean that it takes just one click from your sample to a full report of the molecular weight and size results.The miniDAWN's System Ready monitor will even let you know when the system is fully equilibrated with low baseline noise, ready to run.<h4>Specifications</h4><h5>Measurement Capabilities</h5><ul><li>Molar Mass Range: 200 Da to 10 MDa for proteins; up to 1 MDa for linear polymers (depending on dn/dc, sample concentration, and chromatography conditions).</li><li>Molecular Size (Radius of Gyration, Rg): Approximately 10 nm to 50 nm, extendable up to 150 nm with shape-specific modeling.</li><li>Hydrodynamic Radius (Rh):<ul><li>Flow mode: 0.5 nm to 50 nm (optimal at flow rates ≤ 0.3 mL/min)</li><li>Batch mode: 0.5 nm to 1 µm (requires WyattQELS™ module or DynaPro™ NanoStar™ with fiber optic connection)</li></ul></li><li>Sensitivity: Detects as little as 25 ng of 100 kDa polystyrene in THF or 500 ng of BSA in PBS using a standard 7.8 mm x 300 mm SEC column with no post-column filter.</li></ul><h5>Fluidics and Compatibility</h5><ul><li>Mobile Phase Compatibility: Compatible with both aqueous and organic solvents.</li><li>Wetted Materials: 316 stainless steel, fused silica, and Kalrez.</li></ul><h5>Optical System and Detectors</h5><ul><li>MALS Detectors: Three high-gain, high dynamic range photodiodes at fixed angles.</li><li>Auxiliary Detectors:<ul><li>Laser monitor for stability control</li><li>Forward transmission monitor for absorbing samples and data quality evaluation</li></ul></li><li>Dynamic Range: 3,300,000:1</li><li>Optional DLS Detection:<ul><li>Integrated WyattQELS™ module within the miniDAWN chassis</li><li>External fiber optic connection from DynaPro™ NanoStar or Mobius™ DLS-ELS instruments</li></ul></li></ul><h5>Laser Specifications</h5><ul><li>Wavelength: 658 nm ± 4 nm</li><li>Power Control: Programmable from 10% to 100%</li></ul><h5>Temperature Control</h5><ul><li>Sample Temperature: Ambient</li></ul><h5>Electronics and Connectivity</h5><ul><li>Analog Inputs: 2 differential inputs, 24-bit resolution, ±10 V range</li><li>Analog Outputs: 1 output from a selectable measurement channel, ±10 V range</li><li>I/O Ports: Alarm in/out, auto-inject control, Orbit™ recycle valve support</li><li>Computer Interface: Ethernet</li><li>Data Rate: Up to 36.6 Hz</li></ul><h5>User Interface and Display</h5><ul><li>Front Panel: 7” (178 mm) high-resolution multi-touch display for real-time signal viewing, diagnostics, and settings</li></ul><h5>Instrument Dimensions</h5><ul><li>Size: 58 cm (L) x 36 cm (W) x 18 cm (H)</li></ul><h4>Other MALS Instruments</h4><ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1114">DAWN™</a> - The most sensitive MALS detector available, anywhere. Incorporates detectors at 18 angles to determine molar masses from 200 Da to 1 GDa and radii from 10 – 500 nm.<ul><li>Standard option: ambient temperature</li><li>Heated/cooled option: -15 °C to +150 °C</li><li>High-temperature option: ambient to +210 °C</li><li>The DAWN offers special options to handle fluorescent samples: fluorescence-blocking filters and an infrared, 785 nm laser.</li></ul></li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1116">microDAWN™</a> - The first MALS detector for UHPLC, with interdetector dispersion as low as 1.5 µL. Incorporates detectors at 3 angles to determine molar masses from 200 Da to 20 MDa and radii from 10 – 50 nm. Ambient only.</li><li>ultraDAWN™ - Measures multi-angle light scattering and reports the results – weight-average molecular weight Mw &nbsp;and rms radius Rg &nbsp;– in real time.</li></ul>

Waters/Wyatt microDAWN™ Multi Angle Light Scattering (MALS) Detector

The microDAWN can be coupled to any UHPLC-SEC system to determine absolute molecular weights and sizes of polymers, peptides, or proteins directly, without resorting to column calibration or reference standards.

<h4>Overview</h4><h5>UHPLC-SEC System</h5>The microDAWN can be coupled to any UHPLC-SEC system to determine absolute molecular weights and sizes of polymers, peptides, or proteins directly, without resorting to column calibration or reference standards. The microDAWN produces minimal band broadening in order to maintain the narrow peaks typical of UHPLC, while meeting or exceeding the sensitivity of the miniDAWN™.<h4>Product Description</h4>The microDAWN MALS detector performs absolute characterization of macromolecules eluting from UHPLC, determining molar mass and size independently of retention time and molecular reference standards. This instrument offers superb sensitivity over a wide range of molar mass, size and concentrations. In most respects the microDAWN is similar to the well-established miniDAWN™, a workhorse MALS instrument used in hundreds of labs around the world for characterizing proteins and other molecules smaller than 50 nm in radius.Distinctly from the miniDAWN, the microDAWN is uniquely suitable for use in conjunction with UHPLC Size Exclusion Chromatography (SEC-MALS) thanks to its small interdetector dispersion. In some cases it may be used with ion-exchange or other types of chromatography. Regardless of the specifics, the microDAWN produces minimal band broadening in order to maintain the narrow peaks typical of UHPLC.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_micro_DAWN_MALS_HPLC_detektor_konfigurace_1_4e888650cf.jpg" alt="Waters microDAWN™ Multi Angle Light Scattering (MALS) Instrument: Experimental setup" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_micro_DAWN_MALS_HPLC_detektor_konfigurace_1_4e888650cf.jpg 229w," sizes="100vw" width="894" height="609"><ul><li>Mw&nbsp; from 200 Da to 10 MDa</li><li>Sensitivity: 1.0 µg/mL BSA (66.4 kDa) in PBS; 50 ng/mL 100 kDa polystyrene in THF.</li><li>Rg &nbsp;from 10 to 50 nm</li><li>Ultra-stable laser</li></ul>The microDAWN and its companion microOptilab™ Refractive Index Detector interface to most standard UHPLC systems. As these detectors are based on the advanced technology of Wyatt's miniDAWN and Optilab™, respectively, users may be confident in the underlying capabilities cited in thousands of peer-reviewed publications.<h5>Ultrasonic Cleaning Included</h5>Each microDAWN includes a COMET™ ultrasonic transducer that cleans MALS flow cells automatically by agitating the fluid and loosening particles from the glass surfaces.<h4>Specifications</h4><h5>Measurement Capabilities</h5><ul><li>Molar Mass Range: From 200 Da to 10 MDa for proteins; up to 1 MDa for linear polymers (Typical, depending on dn/dc, sample concentration, and chromatography conditions)</li><li>Molecular or Particle Size (Radius of Gyration, Rg): 10 nm to 50 nm, extendable up to 150 nm with shape-specific modeling</li><li>Hydrodynamic Radius (Rh):<ul><li>Flow mode: 0.5 nm to 30 nm</li><li>Batch mode: 0.5 nm to 1 µm (Requires WyattQELS™ DLS module or DynaPro™ NanoStar™ with fiber optic connection)</li></ul></li><li>Sensitivity: Detects as little as 3.5 ng of 100 kDa polystyrene in THF or 70 ng of BSA in PBS, assuming use of a 15 cm UHPLC-SEC column with no post-column filter</li></ul><h5>Optical System and Detectors</h5><ul><li>MALS Detectors: Three high-gain photodiodes with broad dynamic range for multi-angle light scattering</li><li>Dynamic Range: 3,300,000:1</li><li>Auxiliary Detectors:<ul><li>Laser monitor for stabilization feedback</li><li>Forward transmission monitor for absorbing samples and data quality assessment</li></ul></li><li>Optional DLS Detection:<ul><li>Integrated WyattQELS™ module within the microDAWN chassis</li><li>External DLS connection via fiber optic from DynaPro™ NanoStar or Mobius™ DLS-ELS instruments</li></ul></li></ul><h5>Laser Specifications</h5><ul><li>Wavelength: 658 nm ± 4 nm</li><li>Power Control: Programmable from 10% to 100%</li></ul><h5>Sample Temperature and Flow Characteristics</h5><ul><li>Sample Temperature: Ambient</li><li>Interdetector Band Broadening:<ul><li>Upstream detector to microDAWN: &lt; 1.5 µL</li><li>Upstream to downstream detector: &lt; 1.6 µL</li></ul></li></ul><h5>Material Compatibility</h5><ul><li>Wetted Materials: 316 stainless steel, fused silica, PEEK, PTFE, and MP35N (iron-free alloy)</li></ul><h5>Electronics and Connectivity</h5><ul><li>Analog Inputs: 2 differential inputs, 24-bit resolution, ±10 V input range</li><li>Analog Outputs: 1 output from a user-selectable measurement channel, ±10 V range</li><li>I/O Ports: Alarm in/out, auto-inject control, Orbit™ valve integration</li><li>Computer Interface: Ethernet</li><li>Data Transmission Rate: Up to 73 Hz</li></ul><h5>User Interface</h5><ul><li>Display: 7” (178 mm) high-resolution multi-touch screen for signal monitoring, instrument settings, and diagnostics</li></ul><h5>Instrument Dimensions</h5><ul><li>Size: 58 cm (L) x 36 cm (W) x 18 cm (H)</li></ul><h4>Other MALS Instruments</h4><ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1114">DAWN™</a> - The most sensitive MALS detector available, anywhere. Incorporates detectors at 18 angles to determine molar masses from 200 Da to 1 GDa and radii from 10 – 500 nm.<ul><li>Standard option: ambient temperature</li><li>Heated/cooled option: -15 °C to +150 °C</li><li>High-temperature option: ambient to +210 °C</li><li>The DAWN offers special options to handle fluorescent samples: fluorescence-blocking filters and an infrared, 785 nm laser.</li></ul></li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1115">miniDAWN™</a> - Second only to the DAWN in sensitivity. Incorporates detectors at 3 angles to determine molar masses from 200 Da to 10 MDa and radii from 10 – 50 nm. Ambient only.</li><li>ultraDAWN™ - Measures multi-angle light scattering and reports the results – weight-average molecular weight Mw &nbsp;and rms radius Rg &nbsp;– in real time.</li></ul>

Waters/Wyatt ViscoStar HPLC viscometer

Waters ViscoStar is a highly sensitive, on-line differential viscometer used in conjunction with SEC-MALS-IV to determine the size and conformation of all types of biopolymers, synthetic polymers and even proteins and peptides.

<h4>Highly Sensitive</h4>A highly sensitive, on-line differential viscometer used in conjunction with SEC-MALS-IV to determine the size and conformation of all types of biopolymers, synthetic polymers and even proteins and peptides.<h4>Multiple Novel Technologies</h4>The ViscoStar incorporates multiple novel technologies to provide the highest sensitivity, stability and solvent compatibility of any available viscometer for GPC. Its ease-of-use and serviceability make it the perfect companion for Wyatt's DAWN™ light scattering and Optilab™ refractive index detectors.<h4>Another path to polymer and protein characterization: SEC-MALS-IV</h4>When coupled with size-exclusion chromatography and a concentration detector such as the Optilab™ , the ViscoStar derives the intrinsic viscosity (IV) of polymers. An inherently valuable physico-chemical property in itself, IV is best utilized together with molar mass information from multi-angle light scattering (SEC-MALS-IV) to derive the hydrodynamic radius, conformation, and branching ratio of a macromolecule in solution.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_Visco_Star_pump_pulse_suppression_with_inset_e8c2fbfc18.jpg" alt="Waters ViscoStar: Patented pulse compensation technology in the ViscoStar eliminates pump fluctuations. At the hardware level, the bridge is impedance matched for dynamic balance, greatly reducing the effect of pump pulses. An additional layer of software filtering eliminates residual pump pulses." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_Visco_Star_pump_pulse_suppression_with_inset_e8c2fbfc18.jpg 233w," sizes="100vw" width="348" height="233"><h5>Key benefits of the ViscoStar</h5><ul><li>High sensitivity, equivalent to 100 ng of 100 kDa polystyrene in THF at 1.0 mL/min injected onto a standard GPC column</li><li>High dynamic range of over 135,000:1. The full measurement range corresponds to over 13 mg/mL of 100 kDa polystyrene in THF</li><li>Extended solvent compatibility with all-316 stainless steel transducers</li><li>Temperature range from 4 °C to 70 °C for polymers or proteins that require a range of temperatures</li><li>Minimal band broadening thanks to fast pressure transducers</li><li>Pump pulse suppression to below 4 Pa (hardware alone) or 1 Pa (hardware + software) without loss of chromatographic resolution</li><li>Automated capillary bridge tuning with no moving parts, to guarantee a perfectly balanced bridge, every run</li><li>Enhanced thermal stability with drift of &lt;2.5 Pa/hour</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_Visco_Star_cmc_plga_intrinsic_viscosity_graphs_be99c5d115.jpg" alt="Waters ViscoStar: The ViscoStar provides the highest available dynamic range and sensitivity in online viscometry. This graph shows the intrinsic viscosities of 1) poly(lactic co-glycolic acid), or PLGA, in THF and 2) carboxymethyl cellulose, or CMC, in aqueous mobile phase, both measured with a ViscoStar and Optilab, spanning a range from tens to thousands of mL/g. The same instruments readily measure intrinsic viscosity values in the low single digits with excellent signal-to-noise, even at very low concentrations." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_Visco_Star_cmc_plga_intrinsic_viscosity_graphs_be99c5d115.jpg 236w," sizes="100vw" width="406" height="268"><h5>SEC-IV without MALS?</h5>Yes, as much as we love MALS for optimal polymer analysis, it's true that there are occasions when it just won't fit the bill.Universal calibration is a parallel technique to SEC-MALS for determining molecular weight, commonly used to characterize linear polymers. While universal calibration overcomes some of the problematic issues associated with column calibration by reference molecules, it does not account for non-ideal column behavior caused by chemical solute-column interactions or hyperbranching.Universal calibration is particularly-well suited to replace MALS for:<ul><li>Strongly fluorescent polymers, in particular those not adequately addressed by a DAWN™ with long-wavelength (785 nm) laser or a standard DAWN (685 nm) with fluorescence-blocking filters.</li><li>Weakly-scattering polymer/solvent systems with very low dn/dc values</li></ul>The Mark-Houwink-Sakurada relationship makes use of empirical relationships between intrinsic viscosity and molar mass, specific to each polymer and solvent, to estimate molar mass from SEC-IV measurements. Of course, the best way to determine MHS coefficients is to measure them using SEC-MALS-IV and ASTRA™!<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_Visco_Star_v3_protein_rh_measurements_0951d3769a.jpg" alt="Waters ViscoStar: Three IgG proteins with similar MWs eluted at different elution volumes. To understand their different elution properties, online DLS is typically used to measure the hydrodynamic radius, R h , of a protein. However, online DLS did not provide reliable insights, in this case due to the relatively high experimental uncertainty of the DLS. The precise Rh values obtained with a MALS detector and the ViscoStar III, on the other hand, clearly revealed the causes. IgG B eluted later than IgG A due to its more compact structure; IgG C had a slight interaction with the SEC column." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_Visco_Star_v3_protein_rh_measurements_0951d3769a.jpg 237w," sizes="100vw" width="401" height="264"><h4>Specifications</h4><h5>Measurement Capabilities – Differential Viscosity</h5><ul><li>Sensitivity: Detects as little as 0.1 µg of 100 kDa polystyrene in THF at 1 mL/min under typical GPC conditions.</li><li>Differential Pressure Performance:<ul><li>Noise: &lt; 0.05 Pa</li><li>Range: 6.9 kPa, with built-in overpressure protection</li><li>Drift: &lt; 2.5 Pa/hr</li><li>Linearity: Within 0.5% of full scale</li><li>Dynamic Range: 135,000:1</li></ul></li><li>Capillary Bridge Autobalance: Thermally regulated, leak-free mechanism ensures stable baseline and precision.</li><li>Sample Shear Rate: Up to 5000 Hz with water at 1 mL/min</li></ul><h5>Fluidics and Flow Compatibility</h5><ul><li>Maximum Flow Rate:<ul><li>Aqueous: 1.5 mL/min</li><li>THF: 3 mL/min</li></ul></li><li>Delay Volume Options: Configurable at 16.2, 10.8, or 5.4 mL; optional factory-installed upgrade to 32.4 mL (Note: actual column fluid volume is approx. half the listed value)</li><li>Maximum Inlet-to-Outlet Pressure: 690 kPa</li><li>Wetted Materials: 316 stainless steel, PTFE, zirconium silicate, Kalrez, Inconel, and 26-1 stainless steel – all selected for chemical resistance and long-term durability</li></ul><h5>Temperature Control</h5><ul><li>Operating Range: 4 °C to 70 °C</li><li>Stability: Maintains temperature within &lt; 0.005 °C for precise measurements</li><li>Ambient Conditions: 0 °C to 40 °C; relative humidity 20% to 70%</li></ul><h5>Electronics and Connectivity</h5><ul><li>Digital Output: 20-bit resolution at 10 Hz for high-fidelity data</li><li>Auxiliary I/O:<ul><li>Inputs: Autoinject contact closure, Alarm In, and 2 analog inputs (18-bit, ±10 V)</li><li>Outputs: Autoinject retransmit, Alarm Out, Recycle Out</li></ul></li><li>Communication Interface: Ethernet for seamless integration into lab networks and data systems</li></ul><h5>User Interface</h5><ul><li>Front Panel Display: 7” (178 mm) high-resolution capacitive touchscreen for monitoring signals, diagnostics, and adjusting settings with ease</li></ul><h5>Instrument Dimensions</h5><ul><li>Size: 58 cm (L) × 36 cm (W) × 18 cm (H)</li></ul><h4>Other Viscometers</h4><ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1267">microViscoStar™ </a>- Similar to the ViscoStar but designed specifically for use with UHPLC/APC.</li></ul>

Waters/Wyatt microViscoStar viscometer

The Waters microViscoStar incorporates multiple novel technologies to provide the highest sensitivity, stability and solvent compatibility of any available viscometer for UHPLC. 

<h4>Highly Sensitive</h4>A highly sensitive, on-line differential viscometer used with SEC-MALS-IV to determine the size and conformation of polymers, proteins and peptides separated by UHPLC.<h4>Multiple Novel Technologies</h4>The microViscoStar™ incorporates multiple novel technologies to provide the highest sensitivity, stability and solvent compatibility of any available viscometer for UHPLC. Its ease-of-use and serviceability make it the perfect companion for Wyatt's microDAWN™ light scattering and microOptilab™ refractive index detectors for UHPLC.<h4>Another path to polymer and protein characterization: SEC-MALS-IV</h4>When coupled with size-exclusion chromatography and a concentration detector such as the Optilab™ , the microViscoStar derives the intrinsic viscosity (IV) of polymers. An inherently valuable physico-chemical property in itself, IV is best utilized together with molar mass information from multi-angle light scattering (SEC-MALS-IV) to derive the hydrodynamic radius, conformation, and branching ratio of a macromolecule in solution.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_Visco_Star_pump_pulse_suppression_with_inset_e8c2fbfc18.jpg" alt="Waters microViscoStar: Patented pulse compensation technology in the microViscoStar eliminates pump fluctuations. At the hardware level, the bridge is impedance-matched for dynamic balance, greatly reducing the effect of pump pulses. An additional layer of software filtering eliminates residual pump pulses." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_Visco_Star_pump_pulse_suppression_with_inset_e8c2fbfc18.jpg 233w," sizes="100vw" width="348" height="233"><h5>Key benefits of the ViscoStar</h5><ul><li>High sensitivity, equivalent to 5 ng of 100 kDa polystyrene in THF at 1.0 mL/min injected onto a standard GPC column</li><li>High dynamic range of over 135,000:1. The full measurement range corresponds to over 13 mg/mL of 100 kDa polystyrene in THF</li><li>Extended solvent compatibility with all-316 stainless steel transducers</li><li>Temperature range from 4 °C to 70 °C for polymers or proteins that require a range of temperatures</li><li>Minimal band broadening thanks to fast pressure transducers</li><li>Pump pulse suppression to below 4 Pa (hardware alone) or 1 Pa (hardware + software) without loss of chromatographic resolution</li><li>Automated capillary bridge tuning with no moving parts, to guarantee a perfectly balanced bridge, every run</li><li>Enhanced thermal stability with drift of &lt;1.25 Pa/hour</li></ul><h4>SEC-IV without MALS?</h4>Yes, as much as we love MALS for optimal polymer analysis, it's true that there are occasions when it just won't fit the bill.Universal calibration is a parallel technique to SEC-MALS for determining molecular weight, commonly used to characterize linear polymers. While universal calibration overcomes some of the problematic issues associated with column calibration by reference molecules, it does not account for non-ideal column behavior caused by chemical solute-column interactions or hyperbranching.Universal calibration is particularly-well suited to replace MALS for:<ul><li>Strongly fluorescent polymers</li><li>Weakly-scattering polymer/solvent systems with very low dn/dc values</li></ul>The Mark-Houwink-Sakurada relationship makes use of empirical relationships between intrinsic viscosity and molar mass, specific to each polymer and solvent, to estimate molar mass from SEC-IV measurements. Of course, the best way to determine MHS coefficients is to measure them using SEC-MALS-IV and ASTRA™<h4>Specifications</h4><h5>Measurement Capabilities – Differential Viscosity</h5><ul><li>Sensitivity: Detects as little as 5 ng of 100 kDa polystyrene in THF at 1 mL/min under typical UHPLC-SEC conditions.</li><li>Differential Pressure Performance:<ul><li>Noise: &lt; 0.05 Pa</li><li>Range: Up to 6.9 kPa, with overpressure protection</li><li>Drift: &lt; 1.25 Pa/hr</li><li>Linearity: Within 0.5% of full scale</li><li>Dynamic Range: 135,000:1</li></ul></li><li>Capillary Bridge Autobalance: Thermal, leak-free mechanism ensures stable baseline performance.</li><li>Sample Shear Rate: Up to 15,000 Hz with water at 1 mL/min for high-resolution viscosity profiling.</li></ul><h5>Fluidics and Compatibility</h5><ul><li>Maximum Flow Rate: Aqueous and THF: up to 1 mL/min (Note: Using an inline UV detector may reduce allowable flow rate.)</li><li>Delay Volume: 5.4 mL</li><li>Maximum Inlet-to-Outlet Pressure: 3000 kPa (435 psi)</li><li>Wetted Materials: 316 stainless steel, PTFE, zirconium silicate, Kalrez®, Inconel, 26-1 stainless steel, and nickel</li></ul><blockquote>Note: Due to the location of wetted components, this instrument is primarily recommended for use with organic solvents. High-ionic-strength buffers may cause corrosion.</blockquote><h5>Temperature Control</h5><ul><li>Operating Range: 4 °C to 70 °C</li><li>Stability: Maintains temperature within &lt; 0.005 °C</li><li>Ambient Conditions: 0 °C to 40 °C; 20% to 70% relative humidity</li></ul><h5>Electronics and Connectivity</h5><ul><li>Digital Output: 20-bit resolution at 10 Hz</li><li>Auxiliary I/O:<ul><li>Inputs: Autoinject contact closure, Alarm In, and 2 analog inputs (16-bit, ±10 V)</li><li>Outputs: Autoinject retransmit, Alarm Out, Recycle Out</li></ul></li><li>Communication Interface: Ethernet</li></ul><h5>User Interface</h5><ul><li>Front Panel Display: 7” (178 mm) high-resolution, capacitive multi-touch screen for real-time monitoring, configuration, and diagnostics</li></ul><h5>Instrument Dimensions</h5><ul><li>Size: 60 cm (L) × 36 cm (W) × 17 cm (H)</li></ul><h4>Other Viscometers</h4><ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1117">ViscoStar™</a> - A highly sensitive, on-line differential viscometer used in conjunction with SEC-MALS to determine the size and conformation of all types of biopolymers, synthetic polymers and even proteins and peptides.</li><li>The ViscoStar incorporates multiple novel technologies to provide the highest sensitivity, stability and solvent compatibility of any available viscometer for GPC. Its ease-of-use and serviceability make it the perfect companion for Wyatt's DAWN® light scattering and Optilab® refractive index detectors. Temperature-controlled from 4 °C to 70 °C .</li></ul>

Waters/Wyatt Optilab On-line Differential Refractometer

The Waters Optilab is a unique dRI detector for standard HPLC/GPC with 256 times the detection power and 50 times the dynamic range of every other RI detector for chromatography in existence today, making it a valuable addition to any MALS setup.

<h4>Independent of Chromaphores</h4>Independent of chromaphores or fluorophores, differential Refractive Index (dRI) detectors serve as accurate and versatile concentration detectors in all types of solvents. dRI is part of standard instrumentation for a variety of macromolecular characterization techniques including standard chromatography, SEC-MALS, FFF-MALS and CG-MALS.<h4>Unique dRI Detector</h4>The Optilab is a unique dRI detector for standard HPLC/GPC with 256 times the detection power and 50 times the dynamic range of every other RI detector for chromatography in existence today, making it a valuable addition to any MALS setup.<h4>Product Description</h4>Using a combination of cutting-edge semiconductor photodiode technology and proprietary computer algorithms, the Optilab achieves an unprecedented combination of sensitivity and range. These features mean that it addresses both standard chromatographic applications and some challenges unique to light scattering measurements such as high concentrations, determination of sample refractive increments (dn/dc) and solvent refractive index.<h5>Key Benefits</h5><ul><li>Extraordinary dRI measurement range, -0.0047 to +0.0047 RIU (comparable to 25 mg/mL protein in PBS)</li><li>Highly sensitive, ±7.5 x 10 -10 &nbsp;RIU across the entire measurement range</li><li>Measures solvent absolute refractive index, required for MALS calculations</li><li>Measures at the same wavelength as the MALS detector, for maximum accuracy in MALS calculations</li><li>Band broadening &lt; 20 µL preserves SEC resolution</li><li>Temperature range 4 °C to 65 °C for proteins and polymers that require a range of temperatures</li><li>High-resolution, touch-screen front panel displays data graphs and diagnostics, even with the host computer turned off</li></ul><h5>Unparalleled Features</h5>Even though the Optilab offers a dRI measurement range orders of magnitude beyond that of other dRI detectors, unlike other detectors there are no range or gain settings in the Optilab. The full range of instrument detection is always present, and the full sensitivity exists over the entire range.The Optilab can also do something no other on-line refractive index detector can: it can measure the absolute refractive index of a solution. In addition, it can measure the dn/dc of a solvent at the same wavelength of light as the light scattering instrument. And just to make sure it can't be matched, you can replace the light source in the Optilab for other wavelengths (e.g., 690, 633, 488, etc.) in just minutes!The Optilab can go below ambient temperatures as easily as above ambient. No hassle temperature control can be programmed from 4 °C to 65 °C. Compatible with all HPLC systems.<h4>Specifications</h4><h5>Measurement Capabilities – Differential Refractive Index</h5>Standard Optilab Configuration<ul><li>Measurement Range: –0.0047 to +0.0047 RIU</li><li>Peak-to-Peak Noise: ±7.5 × 10⁻¹⁰ RIU (Measured per ASTM-E1303-95 at 25 °C)</li></ul>High Concentration (HC) Option<ul><li>Measurement Range: –0.0026 to +0.034 RIU</li><li>Peak-to-Peak Noise: ±1.5 × 10⁻⁹ RIU (Optimized for higher concentration samples)</li><li>Response Time: User-selectable from 0.1 to 5 seconds</li><li>Absolute Refractive Index Measurement Range: 1.2 to 1.8 RIU</li><li>Absolute RI Sensitivity: ±0.002 RIU</li></ul>Fluidics and Flow Properties<ul><li>Band Broadening: &lt;12 µL</li><li>Fill Volume (Inlet Tubing + Flow Cell): 51.4 µL</li><li>Outlet Tubing Volume (0.030" ID): 370 µL</li></ul>Pressure Ratings<ul><li>Inlet Back Pressure (0.5 mL/min H₂O @ 20 °C): &lt;22 psi (1.5 bar)</li><li>Max Outlet Back Pressure: 30 psi (2 bar)</li></ul>Temperature Control<ul><li>Sample Temperature Control Range: 4 °C to 65 °C</li><li>Regulation Stability: ±0.005 °C</li></ul>Light Source Options<ul><li>Standard: 660 nm</li><li>HC Model (Optional): 488 nm, 785 nm, or 940 nm</li></ul>Safety Features<ul><li>Built-in vapor and liquid leak sensors for enhanced lab safety</li></ul>Electronics and Connectivity<ul><li>Digital Output: 22+ bit resolution @ 10 Hz</li><li>Analog Output: ±10 V or ±1 V, 18-bit resolution</li><li>Computer Interface: Ethernet</li></ul>Auxiliary I/O Ports<ul><li>Inputs:<ul><li>Analog In (16-bit, ±10 V A/D)</li><li>Zero dRI</li><li>Purge</li><li>Recycle In</li><li>Autoinject In</li><li>Alarm In</li></ul></li><li>Outputs:<ul><li>Autoinject Retransmit</li><li>Alarm Out</li><li>Recycle Out (controls Orbit™ valve switching)</li></ul></li></ul>User Interface<ul><li>Front Panel Display: 7” (178 mm) high-resolution multi-touch screen for viewing signals, diagnostics, and adjusting instrument settings</li></ul>Instrument Dimensions<ul><li>Size: 58 cm (L) × 36 cm (W) × 18 cm (H)</li></ul><h4>Other Refractive Index Detectors</h4><ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1269">microOptilab™</a> - The first RI detector specifically designed for use with all UHPLC systems.</li></ul>

Waters/Wyatt microOptilab On-line Differential Refractometer

The Waters microOptilab brings the universal detection capabilities, unsurpassed concentration range, and superb sensitivity and linearity

<h4>Independent of Chromaphores</h4>Independent of chromaphores or fluorophores, differential Refractive Index (dRI) detectors measure concentrations of all types of samples in almost all solvents. The microOptilab brings the universal detection capabilities, unsurpassed concentration range, and superb sensitivity and linearity – familiar from the Optilab™ – to the domain of UHPLC.<h4>SEC-MALS with UHPLC</h4>Like standard SEC, UHPLC-SEC analysis relying on column calibration with molecular standards is unreliable when the standards do not accurately reflect your samples in terms of conformation, non-ideal (e.g., hydrophobic) column interactions or reversible association. SEC-MALS employs a microDAWN™ MALS detector downstream of the SEC column and UV detector, to determine molar mass / molecular weight distributions of macromolecules independently of column calibration.Refractive index detection is an important component of any SEC-MALS system, and necessary for analyzing conjugated proteins or polymers devoid of chromaphores. The microOptilab connects with the microDAWN MALS detector for a complete UHP-SEC-MALS setup that transfers the many benefits of SEC-MALS analysis to the realm of UHPLC.<h5>Key benefits</h5><ul><li>Very low band broadening, &lt; 4 µL, to maintain the resolution of very narrow UHPLC peaks</li><li>Extraordinary dRI measurement range, -4.7 x 10 -3 &nbsp;to +4.7 x 10 -3 &nbsp;RIU (comparable to 25 mg/mL protein in PBS)</li><li>Highly sensitive, ± 1.5 x 10 -9 &nbsp;RIU across the entire measurement range</li><li>Measures solvent refractive index, require for MALS calculations</li><li>Measures at the same wavelength as the MALS detector, for maximum accuracy in MALS calculations</li><li>Temperature range 4 °C to 65 °C for proteins and polymers that require a range of temperatures</li><li>High-resolution, touch-screen front panel displays data graphs and instrument diagnostics, even with the host computer turned off</li></ul><h5>Unparalleled features</h5><ul><li>Considering the extremely small peak volumes of UHPLC, band broadening in the microOptilab is kept to the absolute minimum, at less than 4 µL, as compared to 20 - 40 µL or more for standard RI detectors. As a result, the superior resolution from UHPLC columns and instruments will not be compromised with the microOptilab RI detector.</li><li>Even though the microOptilab offers a dRI measurement range orders of magnitude beyond that of other UHPLC dRI detectors, unlike other detectors there are no range or gain settings in the microOptilab. The full range of instrument detection is always present, and the full sensitivity exists over the entire range. The small flow cell and proprietary temperature regulation enable stable RI baselines and signals which further enhance the detector's sensitivity.</li><li>Unlike all other dRI detectors, the microOptilab also measures absolute refractive index in order to determine solvent RI, necessary in light scattering calculations and useful in assessing the accuracy of mixing of solvent gradients.</li><li>The microOptilab can be operated below ambient temperatures as easily as above ambient. No hassle temperature control can be programmed down to 4 °C or as high as 65 °C.</li><li>The microOptilab is compatible with all UHPLC systems.</li></ul><h4>Specifications</h4><h5>Measurement Capabilities – Differential Refractive Index</h5><ul><li>Differential RI Measurement Range: –0.0047 to +0.0047 RIU</li><li>Peak-to-Peak Noise: ±1.5 × 10⁻⁹ RIU (Measured per ASTM-E1303-95 at 25 °C with a 0.5 sec collection interval)</li><li>Response Time: User-selectable from 0.04 to 5 seconds</li><li>Absolute Refractive Index Range: 1.2 to 1.8 RIU</li><li>Absolute RI Sensitivity: ±0.002 RIU</li></ul>Fluidics and Flow Properties<ul><li>Band Broadening: &lt;4 µL (at 0.3 mL/min)</li><li>Fill Volume (Inlet Tubing + Flow Cell): 13.7 µL</li><li>Outlet Tubing Volume (0.030” ID): 228 µL</li></ul>Pressure Ratings<ul><li>Inlet Back Pressure (0.5 mL/min H₂O @ 20 °C): &lt;320 psi (22 bar)</li><li>Maximum Permissible Outlet Pressure: 30 psi (2 bar)</li></ul>Temperature Control<ul><li>Control Range: 4 °C to 65 °C</li><li>Stability: ±0.005 °C for precise thermal regulation</li></ul>Optical Source and Safety<ul><li>Light Source: 660 nm wavelength</li><li>Safety Sensors: Integrated vapor and liquid leak detection</li></ul>Electronics and Connectivity<ul><li>Digital Output Rate: 25 Hz</li><li>Analog Output: ±10 V or ±1 V, 18-bit resolution</li><li>Computer Interface: Ethernet for seamless data connectivity</li></ul>Auxiliary I/O Ports<ul><li>Inputs:<ul><li>Analog In (16-bit, ±10 V A/D)</li><li>Zero dRI</li><li>Purge</li><li>Recycle In</li><li>Autoinject In</li><li>Alarm In</li></ul></li><li>Outputs:<ul><li>Autoinject Retransmit</li><li>Alarm Out</li><li>Recycle Out (Orbit™ valve switching)</li></ul></li></ul>User Interface<ul><li>Display: 7” (178 mm) high-resolution multi-touch screen for viewing live signals, diagnostics, and configuring instrument settings</li></ul>Instrument Dimensions<ul><li>Size: 58 cm (L) × 36 cm (W) × 18 cm (H)</li></ul><h4>Other Refractive Index Detectors</h4><ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1268">Optilab™</a> - A unique on-line differential refractometer for measuring concentration of any macromolecule, regardless of chromophores. Temperature controlled from 4 °C to 65 °C. The high-concentration option accommodates protein concentration up to 180 mg/mL.</li></ul>

Products from category HPLC components focused on GPC/SEC from Waters - page 1

Related content

Troubleshooting Retention Time Shifts in Liquid Chromatography

Pesticides in House Dust: An Overlooked Pathway of Human Exposure

News from LabRulezLCMS Library - Week 18, 2026