Scientists at IOCB Prague are uncovering new details of gene transcription. They have identified a previously unknown molecular mechanism by which the transcription of genetic information from deoxyribonucleic acid (DNA) into ribonucleic acid (RNA) can be initiated. The researchers focused on a specific class of molecules known as alarmones, which are found in cells across a wide range of organisms and whose levels often increase under conditions of cellular stress. The results were published in the prestigious scientific journal Nature Chemical Biology.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/UOCHB_Vyzkum_z_UOCHB_odhaluje_dosud_nepoznany_zpusob_prepisu_geneticke_informace_bc2bfffa6c.jpg" alt="IOCB Prague/Tomáš Belloň: Research from IOCB Prague reveals a previously unknown mechanism of genetic transcription: Dr. Hana Cahová, head of the Chemical Biology of Nucleic Acids research group." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_UOCHB_Vyzkum_z_UOCHB_odhaluje_dosud_nepoznany_zpusob_prepisu_geneticke_informace_bc2bfffa6c.jpg 234w," sizes="100vw" width="2000" height="1335"><div>Molecules of ribonucleic acid can carry a variety of chemical modifications at one end, known as caps. In eukaryotic organisms, including human cells, the best-known cap plays an important role in RNA stability and in regulating its subsequent fate. In recent years, however, it has become clear that alternative, non-canonical RNA caps also exist, although their formation and the mechanisms by which they are attached to RNA remain only partially understood. These include alarmone caps, formed by dinucleoside polyphosphate molecules, that protect cellular RNA at moments when the cell is under threat.In their study, <a target="_blank" rel="noopener noreferrer" href="https://cahova.group.uochb.cz/en">Dr. Hana Cahová</a> and colleagues examined bacterial RNA polymerase and investigated how this enzyme can initiate transcription using dinucleoside polyphosphates (NpNs) instead of the standard RNA building blocks. For the first time, the scientists described, at the atomic level, how RNA bearing an alarmone cap can be generated directly at the initiation of gene transcription. They also observed that NpNs bind through a different type of base pairing than is typically observed.The work was significantly shaped by Valentina Serianni from Hana Cahová’s team, who demonstrated the ability of dinucleoside polyphosphates to initiate gene transcription, and by Jana Škerlová, who focused on the structural analysis of RNA polymerase. Using cryogenic electron microscopy data, she showed how dinucleoside polyphosphate molecules bind within the active site of RNA polymerase – that is, the core of the enzyme where genetic information is transcribed. Together, their findings help to elucidate the processes that accompany the transcription of genetic information from DNA to RNA.Hana Cahová adds: “We’re describing something that truly occurs in cells and that we’re now able to observe directly at the level of individual molecules. This allows us to answer fundamental questions about cellular processes, such as how cells adapt to stress. RNA plays a central role in this, as it carries the cascade of information underlying any cellular response – for example, to threatening conditions caused by nutrient deprivation or temperature shock.”<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/UOCHB_Vyzkum_z_UOCHB_odhaluje_dosud_nepoznany_zpusob_prepisu_geneticke_informace_2_0fe88ff9e9.jpg" alt="IOCB Prague/Tomáš Belloň: Research from IOCB Prague reveals a previously unknown mechanism of genetic transcription: Dr. Tomáš Kouba, head of the Cryogenic Electron Microscopy core facility." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_UOCHB_Vyzkum_z_UOCHB_odhaluje_dosud_nepoznany_zpusob_prepisu_geneticke_informace_2_0fe88ff9e9.jpg 234w," sizes="100vw" width="2000" height="1335"><div>Cryogenic electron microscopy (cryo-EM) was central to the project. This part of the work was led by Dr. Tomáš Kouba, one of the authors of the study. “Cryogenic electron microscopy allows us to freeze biological molecules in a state very close to their natural form and then determine their three-dimensional structure. This makes it possible to look directly into the active centers of enzymes and observe their function down to the atomic level,” he explains.Last year, IOCB Prague opened a new <a target="_blank" rel="noopener noreferrer" href="https://cryoem.group.uochb.cz/en">cryo-EM center</a> that is unique within the Czech research environment. State-of-the-art cryogenic electron microscopes are housed in a specially designed building and enable the study of biological processes with exceptional structural precision.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/UOCHB_Vyzkum_z_UOCHB_odhaluje_dosud_nepoznany_zpusob_prepisu_geneticke_informace_3_4d881e7a58.jpg" alt="IOCB Prague: Research from IOCB Prague reveals a previously unknown mechanism of genetic transcription: This work shows how NpnNs initiate bacterial transcription. Cryo-EM reveals how nucleobases pair with the template: one in canonical and one in reverse Watson–Crick mode, providing a structural basis for their function as non-canonical RNA caps." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_UOCHB_Vyzkum_z_UOCHB_odhaluje_dosud_nepoznany_zpusob_prepisu_geneticke_informace_3_4d881e7a58.jpg 245w," sizes="100vw" width="2000" height="1077"><blockquote><h4>The Original article</h4><h4><a target="_blank" rel="noopener noreferrer" href="https://www.nature.com/articles/s41589-025-02134-5">Molecular insight into 5′ RNA capping with NpnNs by bacterial RNA polymerase</a></h4>Valentina M. Serianni, Jana Škerlová, Anna Knopp Dubánková, Anton Škríba, Hana Šváchová, Tereza Vučková, Anatolij Filimoněnko, Milan Fábry, Pavlína Řezáčová, Tomáš Kouba &amp; Hana Cahova&nbsp;Nat. Chem. Biol. 21 (2026)<a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1038/s41589-025-02134-5">https://doi.org/10.1038/s41589-025-02134-5</a><h6>licensed under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/">CC-BY 4.0</a></h6></blockquote><h4>Abstract</h4>RNA capped with dinucleoside polyphosphates has been discovered in bacteria and eukaryotes only recently. The likely mechanism of this specific capping involves direct incorporation of dinucleoside polyphosphates by RNA polymerase as noncanonical initiating nucleotides. However, how these compounds bind into the active site of RNA polymerase during transcription initiation is unknown. Here, we explored transcription initiation in vitro, using a series of DNA templates in combination with dinucleoside polyphosphates and model RNA polymerase from Thermus thermophilus. We observed that the transcription start site can vary on the basis of the compatibility of the specific template and dinucleoside polyphosphate. Cryo-electron microscopy structures of transcription initiation complexes with dinucleoside polyphosphates revealed that both nucleobase moieties can pair with the DNA template. The first encoded nucleotide pairs in a canonical Watson–Crick manner, whereas the second nucleobase pairs noncanonically in a reverse Watson–Crick manner. Our work provides a structural explanation of how dinucleoside polyphosphates initiate RNA transcription.</div></div>

Research from IOCB Prague reveals a previously unknown mechanism of genetic transcription

Food adulteration is a phenomenon with a long history that has gained increasing importance in recent years due to the globalization of food supply chains and strong economic pressures. Whether it involves diluting olive oil with cheaper oils, adding sugar to honey, or the hidden use of substitutes in protein supplements, the result is a loss of consumer trust and, in some cases, a potential risk to health. Analytical chemistry plays a key role in this area by providing methods and technologies capable of identifying and quantifying target compounds as well as unwanted impurities in a wide range of food matrices.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Praha_Falsovani_potravin_a_jak_ho_odhali_analyticka_chemie_6912db5492.jpg" alt="Watrex: Food Adulteration and How It Is Revealed by Analytical Chemistry" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Watrex_Praha_Falsovani_potravin_a_jak_ho_odhali_analyticka_chemie_6912db5492.jpg 245w," sizes="100vw" width="1600" height="900"><h4>The Role of Chromatography in Forensic Food Analysis</h4>Chromatography, particularly liquid chromatography (HPLC), is one of the most effective analytical tools for separating complex mixtures of molecules. It enables:<ul><li>qualitative identification of individual components in a sample,</li><li>quantitative determination of their concentrations,</li><li>detection of impurities and unexpected components that may indicate adulteration.</li></ul>In practice, HPLC is often combined with various types of detectors (UV/VIS, DAD, refractive index detectors) or with other techniques (e.g., mass spectrometry) to increase selectivity and sensitivity.<h4>Isocratic vs. Gradient Elution</h4>In the analysis of food samples, chromatographic methods are selected according to the analytical goal:<ul><li>Isocratic HPLC uses a constant mobile phase composition throughout the analysis. It is simple, robust, and ideal for routine determinations of well-defined target analytes (e.g., sugars or vitamins).</li><li>Gradient HPLC changes the mobile phase composition during separation, enabling better resolution of complex mixtures with a wide range of polarities (e.g., peptides or phenolic compounds).</li></ul>Gradient methods are particularly useful when analytes have very different properties and high separation efficiency is required.<h4>Watrex Praha and the Contribution of Modern Systems to Food Analysis</h4><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_clanky_HPLCsystemy">Watrex Praha, s.r.o.</a> is one of the leading Czech manufacturers and distributors of liquid chromatography systems and instruments, with a long tradition dating back to 1990. The company has successfully transformed from a distributor into a manufacturer of its own HPLC and related technologies, focusing on modular, robust systems suitable even for demanding analytical tasks.Their <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products?manufacturerItems=93&amp;search=streamline">Streamline™ product line</a> includes several HPLC system concepts suitable for food analysis:<ul><li>Isocratic HPLC system – a simple yet precise configuration with a single pump, column thermostat, and UV/VIS detector; suitable for routine determination of known analytes (e.g., basic carbohydrates, food additives).</li><li>Binary gradient HPLC system – equipped with two pumps enabling mobile phase gradient formation, which enhances separation performance for complex mixtures (e.g., phenolic profiles of wine, components of aromatic extracts).</li><li>GPC/SEC system (Gel Permeation / Size Exclusion Chromatography) – a specialized solution for the determination of macromolecules and polymers, also relevant for the analysis of high-molecular-weight components in foods (e.g., polysaccharides).</li></ul><blockquote>👉<a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/Watrex_catalog_2024_ba97395f92.pdf">Product catalogue HERE</a></blockquote>Thanks to the modular nature of these systems, analysts can easily adapt the configuration to a specific analytical problem, from simple routine analyses to complex characterization of food samples.<h4>Practical Examples of Adulteration Revealed by HPLC</h4><ul><li>Detection of olive oil dilution: HPLC can separate and quantify characteristic triacylglycerols and fatty acids; unusual patterns indicate the presence of cheaper oils.</li><li>Estimation of sugar addition in honey: Isocratic HPLC with a refractive index detector can determine sugar profiles (glucose, fructose, sucrose), revealing dilution or the addition of sugar syrups.</li><li>Identification of aromatic adulterants in wine: Gradient HPLC with a PDA detector can reveal phenolic and aromatic profiles that are altered by the addition of synthetic compounds.</li></ul><h4>Conclusion</h4>Food adulteration remains a current issue that requires reliable and sensitive analytical methods. Liquid chromatography, and in particular modern HPLC systems, represent one of the most powerful tools for detecting unwanted additives, impurities, and unexpected components in complex food samples. Manufacturers such as <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_clanky_HPLCsystemy">Watrex Praha</a> provide flexible chromatographic platforms covering a wide range of analytical tasks from simple isocratic to advanced gradient and GPC/SEC applications thereby supporting analysts in ensuring food quality and consumer protection.<blockquote>Did you find this article interesting? Follow <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_clanky_HPLCsystemy">Watrex Praha</a> on their social media (<a target="_blank" rel="noopener noreferrer" href="https://www.linkedin.com/company/watrex/?viewAsMember=true">LinkedIn</a> and <a target="_blank" rel="noopener noreferrer" href="https://www.facebook.com/WatrexPrague">Facebook</a>) for more engaging topics.</blockquote>

Food Adulteration and How It Is Revealed by Analytical Chemistry

Join us for a fascinating conversation with Dr. Subhoja Chakraborty from the University of Central Florida, whose cutting-edge research targets the global challenge of malaria drug resistance. Dr. Chakraborty shares her journey from structure-based drug design during her PhD to her recent collaborative work repurposing human kinase inhibitors as rapid, selective antimalarials against drug-resistant Plasmodium falciparum strains.<h4>In this episode, you'll learn:</h4><ul><li>How structure-guided approaches reveal potential drug targets, including cysteine proteases like falcipain-2, and kinases implicated in malaria's complex life cycle.</li><li>The power of repurposing kinase inhibitors originally developed for cancer and other diseases, focusing on compound 12, which blocks hemozoin formation and protein kinase 6—key steps in parasite survival.</li><li>Lab techniques such as affinity, gel filtration, and size exclusion chromatography for recombinant protein purification—and how troubleshooting is crucial for high-yield, stable complexes.</li><li>Advances in mass spectrometry for characterizing protein interactions, validating drug targets, and mapping molecular pathways pivotal to malaria therapeutics.</li><li>Tips and lessons for new researchers facing the challenges of sample preparation, complex protocols, and working as part of a collaborative team.</li></ul>Dr. Chakraborty’s insights bridge the gap between basic science and translational drug discovery, offering hope for more effective, targeted malaria treatments in a world where resistance to frontline therapies threatens millions.<h4>Referenced Papers:</h4><ul><li>"Plasmodium falciparum protein kinase 6 and hemozoin formation are inhibited by a type II human kinase inhibitor exhibiting antimalarial activity" (Cell Chemical Biology, 2025)</li><li>"New insights of falcipain 2 structure from Plasmodium falciparum 3D7 strain" (BBRC, 2022)</li><li>"Structure-Based Optimization of Protease−Inhibitor Interactions to Enhance Specificity of Human Stefin‑A against Falcipain‑2 from the Plasmodium falciparum 3D7 Strain" (Biochemistry, 2023)</li></ul>If you’re a student, scientist, or simply passionate about advances in infectious disease research, this episode offers actionable insights, inspiring advice, and a front-row seat to innovation in combating malaria.<h3>Video Transcription</h3><h4>From Structural Biology to Drug Discovery: Chromatography and Mass Spectrometry in Malaria Research</h4><h5>Introduction</h5>In this discussion, Subhoja shares insights into her research journey, focusing on malaria drug discovery and the role of modern analytical techniques in biological and biomedical research. The conversation is aimed primarily at undergraduate students and early-career researchers interested in chemistry, biotechnology, and life sciences.<h5>Research Focus: Malaria Drug Discovery and Kinase Targets</h5>Subhoja is currently involved in malaria drug discovery research at the University of Central Florida, where she has been working since beginning her postdoctoral position two years ago. Her earlier PhD research focused on structure-based drug design in malaria, using a combination of in silico approaches, recombinant protein expression, and X-ray crystallography to determine precise three-dimensional structures of target proteins and their inhibitors.This structural perspective provided a foundation for her current work, which centers on drug discovery through compound screening and repurposing. A recent publication from her laboratory explores the use of repurposed mammalian CDK-like kinase inhibitors as potential antimalarial agents. While such kinase inhibitors are well known in cancer and cardiovascular research, their application to malaria targets represents a novel and promising approach.Kinases are attractive drug targets because of their central role in cell signaling and growth pathways. By targeting specific kinases involved in different stages of the malaria parasite life cycle—whether asexual growth, gametocytogenesis, or differentiation—it may be possible to significantly inhibit parasite growth and progression.<h5>Chromatography in Protein Expression and Purification Workflows</h5>Chromatography plays a critical role throughout Subhoja’s research. Her experience spans from basic chromatography techniques during her early training to advanced protein purification workflows using affinity chromatography, gel filtration (size exclusion chromatography), and ion exchange chromatography.Recombinant proteins are routinely purified using affinity resins such as nickel or cobalt, followed by further purification to remove contaminants. Fast Protein Liquid Chromatography (FPLC) enables compact, stepwise purification workflows suitable for producing proteins for in vitro assays.A recurring challenge in this process is the expression of high-molecular-weight proteins, which often accumulate in insoluble fractions or inclusion bodies. Careful selection of expression vectors, host systems, and induction conditions is therefore essential to maximize yield and solubility.<h5>Integrating Size Exclusion Chromatography into the Workflow</h5>Size exclusion chromatography (SEC) is typically used after affinity purification to further improve protein purity. Following elution with imidazole or glutathione, desalting is required to prevent buffer components from interfering with downstream assays. This is often achieved using desalting columns such as G-25 or PD-10.To remove lower-molecular-weight contaminants, finer SEC media—such as Superdex or Sephacryl columns—are employed. Concentration steps using molecular-weight cut-off filters are then applied to obtain the desired protein concentration for functional studies.These iterative purification and troubleshooting steps are a routine part of protein biochemistry and reflect the importance of methodical optimization and careful validation.<h5>The Role of Mass Spectrometry in Biomolecular Characterization</h5>Mass spectrometry is a key analytical tool in Subhoja’s research pipeline, particularly for target identification and validation. In both malaria and cancer research, MS is used alongside chromatography, immunoprecipitation, and pull-down assays to study protein interactions and molecular recognition events.Affinity-based mass spectrometry enables the identification of binding partners and interactors, whether studying proteins, long non-coding RNAs, or protein complexes. Techniques such as native MS, tandem affinity purification, and proximity labeling (e.g., TurboID-based workflows) provide deeper insights into molecular networks and signaling pathways.These approaches are essential for understanding how candidate drug targets function within complex biological systems.<h5>Sample Preparation Challenges in Biological Research</h5>Sample preparation remains one of the most challenging aspects of biological experimentation. Whole-cell lysates contain proteases, nucleases, and other components that can rapidly degrade target molecules. Preventing degradation requires minimizing preparation time, maintaining low temperatures, and using appropriate inhibitor cocktails.Reproducibility is also critical: biological experiments require multiple replicates, and variability is often unavoidable. Careful handling, protocol optimization, and continuous troubleshooting are essential to ensure reliable results, whether preparing samples for chromatography, mass spectrometry, sequencing, or immunoprecipitation.<h5>Advances in Chromatography and MS for Malaria Research</h5>Modern advances in chromatography and mass spectrometry significantly enhance malaria research by enabling precise target identification, quantification, and functional characterization. Drug discovery workflows begin with construct design and recombinant expression, followed by purification and interaction studies.In malaria research, stage-specific parasite biology requires careful extraction and analysis of proteins from different life cycle stages. Tandem affinity MS, immunoprecipitation, and in vivo validation studies help confirm target relevance and therapeutic potential.Recent work on repurposed kinase inhibitors has shown promising results, including inhibition of hemozoin formation—a key detoxification pathway for the malaria parasite—highlighting the potential of such compounds for further development.<h5>Malaria, Drug Resistance, and Global Impact</h5>Malaria remains a major global health burden, with over 600,000 deaths annually and widespread drug resistance complicating treatment. Artemisinin resistance, particularly associated with mutations in the K13 propeller domain, has driven the search for new targets and therapies.During her PhD, Subhoja focused on falcipain-2, a cysteine protease involved in hemoglobin degradation within the parasite. This pathway is critical for parasite survival and has emerged as a promising drug target. Her work revealed that falcipain-2 operates within a larger protein complex responsible for hemoglobin processing and amino acid release.Understanding these molecular mechanisms is essential for developing robust, stage-specific antimalarial strategies.<h5>Advice for Early-Career Researchers</h5>For researchers just starting out, Subhoja emphasizes the importance of hands-on experience. Working directly with cells, lysates, and analytical tools is essential for truly understanding experimental systems. Failure is an inherent part of research, and perseverance is key.Motivation, teamwork, careful sample handling, and thorough preparation all contribute to long-term success. Reading extensively, critically evaluating one’s own work, and appreciating incremental progress are vital aspects of a sustainable research career.Every successful experiment—no matter how small—represents meaningful progress and contributes to the broader goals of science and medicine.<h5>Closing Remarks</h5>The discussion highlights how interdisciplinary approaches combining chromatography, mass spectrometry, structural biology, and biochemistry are driving advances in malaria drug discovery. Through careful experimental design, analytical rigor, and collaborative teamwork, researchers can address complex biological challenges and contribute to global health solutions.<blockquote>This text has been automatically transcribed from a video presentation using AI technology. It may contain inaccuracies and is not guaranteed to be 100% correct.</blockquote><blockquote><h4>Concentrating on Chromatography Podcast</h4>Dive into the frontiers of chromatography, mass spectrometry, and sample preparation with host David Oliva. Each episode features candid conversations with leading researchers, industry innovators, and passionate scientists who are shaping the future of analytical chemistry. From decoding PFAS detection challenges to exploring the latest in AI-assisted liquid chromatography, this show uncovers practical workflows, sustainability breakthroughs, and the real-world impact of separation science. Whether you’re a chromatographer, lab professional, or researcher you'll discover inspiring content!You can find Concentrating on Chromatography Podcast in podcast apps:<ul><li><a target="_blank" rel="noopener noreferrer" href="https://open.spotify.com/show/1wZg67rCjoGju4yhqxI3tL">Spotify</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://podcasts.apple.com/tz/podcast/concentrating-on-chromatography/id1788429185">Apple podcast</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://podscan.fm/podcasts/concentrating-on-chromatography">podscan</a></li></ul>and on <a target="_blank" rel="noopener noreferrer" href="https://www.youtube.com/@ChromatographyTalk/videos">YouTube channel</a></blockquote>

Affinity, Gel Filtration, Size Exclusion Chromatography: Repurposing Kinase Inhibitors for Malaria

Article

Product

Video

Scientists

Food

Interview

Science and research

The Institute of Organic Chemistry and Biochemistry of the Czech Academy of Sciences (IOCB Prague) is a leading scientific institution in the Czech Republic, recognized internationally. Its primary mission is basic research in the fields of chemical biology and medicinal chemistry, organic and material oriented chemistry, chemistry of natural compounds, biochemistry and molecular biology, physical chemistry, theoretical chemistry, and analytical chemistry. 

Institute of Organic Chemistry and Biochemistry of the Czech Academy of Sciences

Organomation, founded in 1959, designs and manufactures high-quality nitrogen evaporators and extraction systems. Known for innovation and durability, their lab instruments are used globally for efficient sample preparation with strong customer support.

Organomation

WATREX Prague is the distributor and producer of HPLC techniques in the Czech Republic and Slovakia. Main Chromatografic and Related Techniques Supported: LC, GPC, IC, IEC, Automated SPE, LC Columns and special column packings, LC method development, Software development, Laboratory Robots.

Watrex Praha

Organomation 34 Position N-EVAP Nitrogen Evaporator

Our 34-position nitrogen evaporator (cat# 11634) offers a large number of sample positions, without compromising any of the classic N-EVAP features. 

Our 34-position nitrogen evaporator (cat# 11634) offers a large number of sample positions, without compromising any of the classic N-EVAP features. This time-tested, durable system provides one of the least expensive prices per position of all our N-EVAPs. The evaporative system, along with the standard flow control and pressure reducing regulator, enables the operator to achieve the desired level of concentration with efficient nitrogen usage. Our unique dual band spring hoist assembly ensures easy and effective operator use.Additionally, the 34 position N-EVAP includes a side control box, which provides timed and digitally controlled water bath temperatures to produce even evaporation rates. The pressure regulator and timer combine to allow timed automatic gas flow cut off which slows evaporation to a minimum once the timed cycle has been completed. In order to prevent damage to delicate samples, the timer also provides the option for the heat to shut off once the cycle is complete.<ul><li>Gentle: N-EVAP nitrogen evaporators combine nitrogen blow down with a heated bath to gently concentrate delicate samples</li><li>Flexible: An adjustable sample holder design fits a wide variety of sample tubes and vials at once</li><li>Precise: Digital controls allow exact temperature regulation</li><li>Individualized Control: Optimize evaporation of diverse samples with individual gas flow control at each vial</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Organomation_34_Position_N_EVAP_Nitrogen_Evaporator_3_04176ee4e2.jpg" alt="Organomation 34 Position N-EVAP Nitrogen Evaporator." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Organomation_34_Position_N_EVAP_Nitrogen_Evaporator_3_04176ee4e2.jpg 156w," sizes="100vw" width="1400" height="1400"><h3>STANDARD FEATURES</h3><ul><li>Nitrogen filter</li><li>Adjustable flow meter, 0-30 LPM</li><li>Built-in pressure reducing regulator</li><li>Side control box</li><li>Digital temperature controller</li><li>Electronic timer</li><li>Safety control cover plate</li><li>High pressure phthalate free tubing&nbsp;</li><li>High temperature limit switch for safety</li><li>Dual band spring hoist assembly&nbsp;</li><li>Precision needle valve tube assembly</li><li>Needles, 4 inch x 19 gauge with chrome plated brass hub and stainless steel shaft</li></ul><h3>OPTIONS&nbsp;</h3><ul><li>220v wiring harness (Option Code# -2), Cat# 111634-2</li><li>Z-Purge/positive pressure purge case (Option Code# -Z), Cat# 11634-Z</li><li>Acid resistant coating on instrument and needles (Option Code# -RT), Cat# 11634-RT</li></ul><h3>SPECS</h3><h4>34 Position N-EVAP (Water Bath)</h4><ul><li>Bath Type: Water</li><li>Instrumental Catalog Number: 11634</li><li>Number of Sample Positions: 34</li><li>Overall Dimension (w × d × h): 24 × 19 × 34 in / 61 × 48 × 86 cm</li><li>Sample Holder Layout: Circular</li><li>Gas Manifold Layout: Single Ring</li><li>Test Tube Range (Standard Sample Holder): 10–30 mm OD</li><li>Gas Flow Meter: 0–30 L/min</li><li>Stainless Steel Needles (Length × Gauge): 4.0 in × 19 ga / 102 mm × 19 ga</li><li>Built-in Nitrogen Gauge Input: 30–110 psig</li><li>Sample Tray Lift Mechanism: Dual Band Spring Hoist Assembly</li><li>Rotating, Leak Tight Gas Fitting: Standard</li><li>Acid Resistant Coating: Optional</li></ul><h5>Heating Device Specs</h5><ul><li>Model Number: 13165</li><li>Heating Medium: Water</li><li>Inside Dimensions (Diameter × Depth): 16.0 × 4.5 in / 40.6 × 11.4 cm</li><li>Outside Dimensions (w × d × h): 24 × 19 × 6 in / 61 × 48 × 15 cm</li><li>Total Wattage: 1300 W</li><li>Bath Temperature Range: 30–90 °C</li><li>Temperature Controller Type: Digital Electronic with LED Display</li><li>Controller Accuracy: ±2 °C</li><li>Side Mounted Control Box with Timer for Nitrogen &amp; Heat: Standard</li></ul><h4>34 Position N-EVAP (No Bath)</h4><ul><li>Bath Type: None</li><li>Instrumental Catalog Number: 11634-O</li><li>Number of Sample Positions: 34</li><li>Overall Dimension (w × d × h): 19 × 17 × 32 in / 48 × 43 × 81 cm</li><li>Sample Holder Layout: Circular</li><li>Gas Manifold Layout: Single Ring</li><li>Test Tube Range (Standard Sample Holder): 10–30 mm OD</li><li>Gas Flow Meter: 0–30 L/min</li><li>Stainless Steel Needles (Length × Gauge): 4.0 in × 19 ga / 102 mm × 19 ga</li><li>Built-in Nitrogen Gauge Input: 30–110 psig</li><li>Sample Tray Lift Mechanism: Dual Band Spring Hoist Assembly</li><li>Rotating, Leak Tight Gas Fitting: Standard</li><li>Acid Resistant Coating: Optional</li></ul><h3>MODELS</h3><h5>Catalog Number &nbsp;/&nbsp;&nbsp;&nbsp;Bath Type</h5><ul><li>11634: Water</li><li>11634-O: No Bath*</li></ul>*All “-O” models come with a base and stand assembly instead of a heated bath. These instruments are designed for evaporation procedures performed at ambient temperature.<h3>ACCESSORIES</h3><ul><li>Nitrogen generator (cat# NA1955)</li><li>Pasteur pipette adapters (cat# NA0636)</li><li>High temperature silicone fluid (cat# NA1240)</li><li>Various needle sizes and gauges</li></ul><h3>REPLACEMENT PARTS</h3><ul><li>P0627: Valve Tube Assembly – Post 1997</li><li>P0607: Luer &amp; washer for N-EVAP valve tube</li><li>P0634: Tube Fitting nylon 3 part for N-EVAP valve tube</li></ul>

Organomation 45 Position N-EVAP Nitrogen Evaporator

Our 45-position nitrogen evaporator offers the largest number of sample positions in our N-EVAP line. 

Our 45-position nitrogen evaporator (Catalog # 11645) offers the largest number of sample positions in our N-EVAP line. The sample holder has dual circular rings. The outer ring has 30 positions and can accommodate samples with an outside diameter of 10-19 mm The inner ring has 15 positions and can accommodate samples with an outside diameter of 16-30 mm and a minimum height of 70 mm.This time-tested, durable system provides the least expensive price per position of all our N-EVAPs. The evaporative system, along with the standard flow control and pressure reducing regulator, enables the operator to achieve the desired level of concentration with efficient nitrogen usage. Our unique dual band spring hoist assembly ensures easy and effective operator use. Additionally, the 45 position N-EVAP includes a side control box. Timed, digitally controlled water bath temperatures provide even evaporation rates. The pressure regulator and timer combine to allow timed automatic gas flow cut off which slows evaporation to a minimum once the timed cycle has been completed. The heat can also be shut off with the gas after a timed cycle.<ul><li>Gentle: N-EVAP nitrogen evaporators combine nitrogen blow down with a heated bath to gently concentrate delicate samples</li><li>Flexible: An adjustable sample holder design fits a wide variety of sample tubes and vials at once</li><li>Precise: Digital controls allow exact temperature regulation</li><li>Individualized Control: Optimize evaporation of diverse samples with individual gas flow control at each vial</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Organomation_45_Position_N_EVAP_Nitrogen_Evaporator_5_20078e3969.jpg" alt="Organomation: 45 Position N-EVAP Nitrogen Evaporator." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Organomation_45_Position_N_EVAP_Nitrogen_Evaporator_5_20078e3969.jpg 156w," sizes="100vw" width="1400" height="1400"><h3>STANDARD FEATURES</h3><ul><li>Nitrogen filter</li><li>Adjustable flow meter, 0-30 LPM</li><li>Built-in pressure reducing regulator</li><li>Side control box</li><li>Digital temperature controller</li><li>Electronic timer</li><li>Safety control cover plate</li><li>High pressure phthalate free tubing&nbsp;</li><li>High temperature limit switch for safety</li><li>Dual band spring hoist assembly&nbsp;</li><li>Precision needle valve tube assembly</li><li>Needles, 4 inch x 19 gauge with chrome plated brass hub and stainless steel shaft</li></ul><h3>OPTIONS&nbsp;</h3><ul><li>220v wiring harness (Option Code# -2), Cat# 11645-2</li><li>Z-Purge/positive pressure purge case (Option Code# -Z), Cat# 11645-Z</li><li>Acid resistant coating on instrument and needles (Option Code# -RT), Cat# 11645-RT</li></ul><h3>SPECS</h3><h4>45 Position N-EVAP (Water Bath)</h4><ul><li>Bath Type: Water</li><li>Instrumental Catalog Number: 11645</li><li>Number of Sample Positions: 45</li><li>Overall Dimension (w × d × h): 24 × 19 × 34 in / 61 × 48 × 86 cm</li><li>Sample Holder Layout: Circular</li><li>Gas Manifold Layout: Dual Rings</li><li>Outer Circle Sample Holder Test Tube Range: 10–19 mm OD</li><li>Inner Circle Sample Holder Test Tube Range: 16–30 mm OD; &gt;70 mm height</li><li>Gas Flow Meter: 0–30 L/min</li><li>Stainless Steel Needles (Length × Gauge): 4.0 in × 19 ga / 102 mm × 19 ga</li><li>Sample Tray Lift Mechanism: Dual Band Spring Hoist Assembly</li><li>Rotating, Leak Tight Gas Fitting: Standard</li><li>Built-in Nitrogen Gauge Input: 30–110 psig</li><li>Acid Resistant Coating: Optional</li></ul><h5>Heating Device Specs</h5><ul><li>Model Number: 13165</li><li>Heating Medium: Water</li><li>Inside Dimensions (Diameter × Depth): 16.0 × 4.5 in / 40.6 × 11.4 cm</li><li>Outside Dimensions (w × d × h): 24 × 19 × 6 in / 61 × 48 × 15 cm</li><li>Total Wattage: 1300 W</li><li>Bath Temperature Range: 30–90 °C</li><li>Temperature Controller Type: Digital Electronic with LED Display</li><li>Controller Accuracy: ±2 °C</li><li>Side Mount Control Box with Timer for Nitrogen &amp; Heat: Standard</li></ul><h4>45 Position N-EVAP (No Bath)</h4><ul><li>Bath Type: None</li><li>Instrumental Catalog Number: 11645-O</li><li>Number of Sample Positions: 45</li><li>Overall Dimension (w × d × h): 24 × 19 × 32 in / 61 × 48 × 81 cm</li><li>Sample Holder Layout: Circular</li><li>Gas Manifold Layout: Dual Rings</li><li>Outer Circle Sample Holder Test Tube Range: 10–19 mm OD</li><li>Inner Circle Sample Holder Test Tube Range: 16–30 mm OD; 70 mm height</li><li>Gas Flow Meter: 0–30 L/min</li><li>Stainless Steel Needles (Length × Gauge): 4.0 in × 19 ga / 102 mm × 19 ga</li><li>Sample Tray Lift Mechanism: Dual Band Spring Hoist Assembly</li><li>Rotating, Leak Tight Gas Fitting: Standard</li><li>Built-in Nitrogen Gauge Input: 30–110 psig</li><li>Acid Resistant Coating: Optional</li></ul><h3>MODELS</h3><h5>Catalog Number &nbsp;/&nbsp;&nbsp;&nbsp;Bath Type</h5><ul><li>11645: Water Bath</li><li>11634-O: No Bath*</li></ul>*All “-O” models come with a base and stand assembly instead of a heated bath. These instruments are designed for evaporation procedures performed at ambient temperature.<h3>ACCESSORIES</h3><ul><li>Nitrogen generator (cat# NA1955)</li><li>Pasteur pipette adapters (cat# NA0636)</li><li>High temperature silicone fluid (cat# NA1240)</li><li>Various needle sizes and gauges</li></ul><h3>REPLACEMENT PARTS</h3><ul><li>P0627: Valve Tube Assembly – Post 1997</li><li>P0607: Luer &amp; washer for N-EVAP valve tube</li><li>P0634: Tube Fitting nylon 3 part for N-EVAP valve tube</li></ul>

Organomation 48 Position MULTIVAP Nitrogen Evaporator

The 48 position MULTIVAP nitrogen evaporator is a high temperature dry block model. This instrument contains a rectangular gas distribution system mounted on a frame and dual post assembly.

The 48 position MULTIVAP nitrogen evaporator is a high temperature dry block model. This instrument contains a rectangular gas distribution system mounted on a frame and dual post assembly. The manifold delivers nitrogen gas to the needles or glass pipettes, which direct the gas onto the sample’s surface. This method results in rapid solvent evaporation and sample concentration. In order to conserve nitrogen gas, the manifold has a toggle switch for every row of 6 samples, which allows individual rows to be shut off when evaporating batches of less than 48 samples. Nitrogen gas flow is also controlled by an adjustable flow meter and a built-in pressure regulator.The 48 position MULTIVAP parallel evaporator uses a heated aluminum dry block to reach evaporative temperatures ranging from 30°C to 120°C. An unheated version is available for evaporations that will be performed at ambient temperatures. Sample blocks are customized for the user’s sample size for maximum and even heat transfer. &nbsp;Inserts can be customized for sample vial outside diameters of 10-22 mm.One set of inserts is included with the instrument. Since these inserts and heat blocks are made-to-order, we will request that you deliver us three sample vials for each unique vial size upon placing an order for a 30, 48 or 80 Position MULTIVAP. In situations where shipping sample vials to Organomation is not possible, we need precise measurements of your sample vials to be taken.All models can withstand contact with organic solvents; however acid resistant models are also available for use with corrosive solutions.&nbsp;<ul><li>Capacity: Evaporate batches of up to 48 samples, with outside diameters of up to 22 mm</li><li>Precise: Digital controls allow exact temperature regulation</li><li>Cost-Effective: Conserve gas by using ON/OFF valve for rows not in use</li><li>Consistent: Uniform evaporation across all samples with no adjustment needed between runs</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Organomation_48_Position_MULTIVAP_Nitrogen_Evaporator_2_b46408a225.jpg" alt="Organomation 48 Position MULTIVAP Nitrogen Evaporator." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Organomation_48_Position_MULTIVAP_Nitrogen_Evaporator_2_b46408a225.jpg 156w," sizes="100vw" width="1400" height="1400"><h3>STANDARD FEATURES</h3><ul><li>Adjustable flow meter, 0-25 L/min</li><li>Dual band hoist spring assembly</li><li>High temperature limit switch for safety</li><li>Digital temperature controller</li><li>Electronic timer</li><li>Nitrogen filter</li><li>Gas distribution manifold</li><li>Built-in pressure reducing regulator</li><li>Needle guide</li></ul><h3>OPTIONS&nbsp;</h3><ul><li>220v wiring harness (Option Code# -2), Cat# 11848-2</li><li>Z-Purge/positive pressure purge case (Option Code# -Z), Cat# 11848-Z</li><li>Acid resistant coating on instrument and needles (Option Code# -RT), Cat# 11848-RT</li><li>Pasteur pipette adapters in place of needles (Option Code -P), Cat# 11848-P</li><li>Manifold and stand only: no heating platform (Option Code -O), Cat# 11848-O</li></ul><h3>SPECS</h3><h4>48 Position MULTIVAP (Dry Block)</h4><ul><li>Heater Type: Dry Block</li><li>Instrumental Catalog Number: 11848</li><li>Number of Sample Positions: 48</li><li>Overall Dimension (w × d × h): 16 × 14 × 30 in / 41 × 36 × 76 cm</li><li>Sample Holder Layout: Rectangular</li><li>Gas Manifold Layout: 6 × 8 Array</li><li>Center to Center Spacing Between Positions: 1.0 in / 2.54 cm</li><li>Test Tube Diameter: 10–22 mm OD</li><li>Gas Flow Control On/Off Valve: Every row of 6</li><li>Stainless Steel Needles (Length × Gauge): 4.0 in × 19 ga / 102 mm × 19 ga</li><li>Needle Guide: Standard</li><li>Hoist Assembly: Dual Pulley &amp; Band Springs</li><li>Integrated Control Box with Timer for Nitrogen &amp; Heat: Standard</li><li>Built-in Gas Regulator Input: 30–110 psig</li><li>Acid Resistant Coating (Option Code -RT): Optional</li></ul><h5>OA-SYS Heating Device Specifications</h5><ul><li>Model Number: 9156</li><li>Outside Dimensions: 16 × 14 × 6.5 in / 41 × 36 × 15 cm</li><li>Total Wattage: 900 W</li><li>Temperature Range: 30–120 °C</li><li>Temperature Controller Type: Digital Electronic with LED Display</li><li>Controller Accuracy: ±2 °C</li></ul><h4>48 Position MULTIVAP (No Heater)</h4><ul><li>Heater Type: None</li><li>Instrumental Catalog Number: 11848-O</li><li>Number of Sample Positions: 48</li><li>Overall Dimension (w × d × h): 13 × 15 × 26 in / 33 × 38 × 66 cm</li><li>Sample Holder Layout: Rectangular</li><li>Gas Manifold Layout: 6 × 8 Array</li><li>Center to Center Spacing Between Positions: 1.0 in / 2.54 cm</li><li>Test Tube Diameter: 10–22 mm OD</li><li>Gas Flow Control On/Off Valve: Every row of 6</li><li>Stainless Steel Needles (Length × Gauge): 4.0 in × 19 ga / 102 mm × 19 ga</li><li>Needle Guide: Standard</li><li>Hoist Assembly: Dual Pulley &amp; Band Springs</li><li>Integrated Control Box with Timer for Nitrogen &amp; Heat: N/A</li><li>Built-in Gas Regulator Input: 30–110 psig</li><li>Acid Resistant Coating (Option Code -RT): Optional</li></ul><h3>ACCESSORIES</h3><ul><li>Nitrogen generator (cat# NA1955)</li><li>Custom sized inserts (cat# NA1801, cat# NA1803)</li><li>Pasteur pipette adapters (cat# NA0636, cannot be used with needle guide)</li><li>Luer plugs (cat# NA1307)</li><li>Pressure reducing regulator 0-160 psi (cat# NA0630)</li><li>Various needle sizes and gauges</li></ul>

Organomation 64 Position MULTIVAP Nitrogen Evaporator

Organomation MULTIVAP 64-position nitrogen concentrator for 64 samples, water bath 30–100 °C, digital control, switchable rows of 8 positions, power 1100 W, accuracy ±2 °C.

The 64 position MULTIVAP nitrogen blowdown evaporator is a water bath model. This instrument contains a rectangular gas distribution system mounted on a frame and dual post assembly. The manifold delivers nitrogen gas to the needles or glass pipettes, which direct the gas onto the sample’s surface. This method results in rapid solvent evaporation and sample concentration. In order to conserve nitrogen gas, the manifold has a toggle switch for every row of 8 samples, which allows individual rows to be shut off when evaporating batches of less than 64 samples. Nitrogen gas flow is also controlled by an adjustable flow meter and a built-in pressure regulator.The 64 position MULTIVAP parallel evaporator uses a heated water bath to reach evaporative temperatures ranging from 30°C to 100°C. An unheated version is available for evaporations that will be performed at ambient temperatures. Sample racks are customized within a range of 11-30 mm for the user’s sample size. Please specify sample size (outside diameter and length to nearest 0.1 mm) when placing an order. All models can withstand contact with organic solvents; however acid resistant models are also available for use with corrosive solutions.<ul><li>Capacity: Evaporate batches of up to 64 samples, with outside diameters of up to 30 mm</li><li>Precise: Digital controls allow exact temperature regulation</li><li>Optimum Heat Transfer: The water bath provides even heating and optimum heat transfer up to 100°C</li><li>Consistent: Uniform evaporation across all samples with no adjustment needed between runs</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Organomation_64_Position_MULTIVAP_Nitrogen_Evaporator_2_76daf66198.jpg" alt="Organomation 64 Position MULTIVAP Nitrogen Evaporator." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Organomation_64_Position_MULTIVAP_Nitrogen_Evaporator_2_76daf66198.jpg 105w," sizes="100vw" width="800" height="1193"><h3>STANDARD FEATURES</h3><ul><li>Adjustable flow meter, 0-25 lpm</li><li>Dual band hoist spring assembly</li><li>High temperature limit switch for safety</li><li>Safety control cover plate</li><li>Digital temperature controller</li><li>Electronic timer</li><li>Nitrogen filter</li><li>Gas distribution manifold</li><li>Built-in pressure reducing regulator</li><li>Needle guide</li></ul><h3>OPTIONS&nbsp;</h3><ul><li>220v wiring harness (Option Code# -2), Cat# 11364-2</li><li>Z-Purge/positive pressure purge case (Option Code# -Z), Cat# 11364-Z</li><li>Acid resistant coating on instrument and needles (Option Code# -RT), Cat# 11364-RT</li><li>Manifold and stand only: no heating platform (Option Code -O), Cat# 11364-O</li></ul><h3>SPECS</h3><h4>64 Position MULTIVAP (Water Bath)</h4><ul><li>Heater Type: Water Bath</li><li>Instrumental Catalog Number: 11364</li><li>Number of Sample Positions: 64</li><li>Overall Dimension (w × d × h): 19 × 17 × 34 in / 48 × 43 × 86 cm</li><li>Sample Holder Layout: Square</li><li>Gas Manifold Layout: 8 × 8 Array</li><li>Center to Center Spacing Between Positions: 1.3125 in / 3.33 cm</li><li>Test Tube Diameter: 11–30 mm OD</li><li>Gas Flow Control On/Off Valve: Every row of 8</li><li>Gas Flow Meter Range: 0–30 L/min</li><li>Stainless Steel Needles (Length × Gauge): 4.0 in × 19 ga / 102 mm × 19 ga</li><li>Needle Guide: Standard</li><li>Hoist Assembly: Dual Pulley &amp; Band Springs</li><li>Built-in Gas Regulator Input: 30–110 psig</li><li>Acid Resistant Coating (Option Code -RT): Optional</li></ul><h5>OA-SYS Heating Device Specifications</h5><ul><li>Model Number: 11196</li><li>Inside Dimensions (Diameter × Depth): 11 × 11 × 5.5 in / 28 × 28 × 14 cm</li><li>Outside Dimensions (w × d × h): 19 × 17 × 7 in / 48 × 43 × 18 cm</li><li>Total Wattage: 1100 W</li><li>Temperature Range: 30–110 °C</li><li>Temperature Controller Type: Digital Electronic with LED Display</li><li>Controller Accuracy: ±2 °C</li></ul><h4>64 Position MULTIVAP (No Heater)</h4><ul><li>Heater Type: None</li><li>Instrumental Catalog Number: 11364-O</li><li>Number of Sample Positions: 64</li><li>Overall Dimension (w × d × h): 14 × 14 × 26 in / 35.5 × 35.5 × 66 cm</li><li>Sample Holder Layout: Square</li><li>Gas Manifold Layout: 8 × 8 Array</li><li>Center to Center Spacing Between Positions: 1.3125 in / 3.33 cm</li><li>Test Tube Diameter: 11–30 mm OD</li><li>Gas Flow Control On/Off Valve: Every row of 8</li><li>Gas Flow Meter Range: 0–30 L/min</li><li>Stainless Steel Needles (Length × Gauge): 4.0 in × 19 ga / 102 mm × 19 ga</li><li>Needle Guide: Standard</li><li>Hoist Assembly: Dual Pulley &amp; Band Springs</li><li>Built-in Gas Regulator Input: 30–110 psig</li><li>Acid Resistant Coating (Option Code -RT): Optional</li></ul><h3>ACCESSORIES</h3><ul><li>Custom sized racks (cat# NA1360)</li><li>Pasteur pipette adapters (cat# NA0636, cannot be used with needle guide)</li><li>Luer plugs (cat# NA1307)</li><li>Various needle sizes and gauges</li></ul>

Organomation 80 Position MULTIVAP Nitrogen Evaporator

The 80 position MULTIVAP parallel evaporator is a high temperature dry block model. This instrument contains a rectangular gas distribution system mounted on a frame and dual post assembly. 

The 80 position MULTIVAP parallel evaporator is a high temperature dry block model. This instrument contains a rectangular gas distribution system mounted on a frame and dual post assembly. The manifold delivers nitrogen gas to the needles or glass pipettes, which direct the gas onto the sample’s surface. This method results in rapid solvent evaporation and sample concentration. In order to conserve nitrogen gas, the manifold has a toggle switch for every row of 8 samples, which allows individual rows to be shut off when evaporating batches of less than 80 samples. Nitrogen gas flow is also controlled by an adjustable flow meter and a built-in pressure regulator.The 80 position MULTIVAP small vial evaporator uses a heated aluminum dry block to reach evaporative temperatures ranging from 30°C to 120°C. An unheated version is available for evaporations that will be performed at ambient temperatures. Sample blocks are customized, within a range of 10-17 mm, for the user’s sample size for maximum and even heat transfer.Since the heat block is made-to-order, we will request that you deliver us three sample vials for each unique vial size upon placing an order for a 30, 48 or 80 Position MULTIVAP. In situations where shipping sample vials to Organomation is not possible, we need precise measurements of your sample vials to be taken.All models can withstand contact with organic solvents; however acid resistant models are also available for use with corrosive solutions.<ul><li>Capacity: Evaporate batches of up to 80 samples at once, with outside diameters of up to 17 mm</li><li>Precise: Digital controls allow exact temperature regulation</li><li>Cost-Effective: Conserve gas by using ON/OFF valve for rows not in use</li><li>Consistent: Uniform evaporation across all samples with no adjustment needed between runs</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Organomation_80_Position_MULTIVAP_Nitrogen_Evaporator_2_8d7053713b.jpg" alt="Organomation 80 Position MULTIVAP Nitrogen Evaporator." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Organomation_80_Position_MULTIVAP_Nitrogen_Evaporator_2_8d7053713b.jpg 156w," sizes="100vw" width="1400" height="1400"><h3>STANDARD FEATURES</h3><ul><li>Adjustable flow meter, 0-25 lpm</li><li>Dual band hoist spring assembly</li><li>High temperature limit switch for safety</li><li>Safety control cover plate</li><li>Digital temperature controller</li><li>Electronic timer</li><li>Nitrogen filter</li><li>Gas distribution manifold</li><li>Built-in pressure reducing regulator</li><li>Needle guide</li></ul><h3>OPTIONS&nbsp;</h3><ul><li>220v wiring harness (Option Code# -2), Cat# 11880-2</li><li>Z-Purge/positive pressure purge case (Option Code# -Z), Cat# 11880-Z</li><li>Acid resistant coating on instrument and needles (Option Code# -RT), Cat# 11880-RT</li><li>Pasteur pipette adapters in place of needles (Option Code -P), Cat# 11880-P</li><li>Manifold and stand only: no heating platform (Option Code -O), Cat# 11880-O</li></ul><h3>SPECS</h3><h4>80 Position MULTIVAP (Dry Block)</h4><ul><li>Heater Type: Dry Block</li><li>Instrumental Catalog Number: 11880</li><li>Number of Sample Positions: 80</li><li>Overall Dimension (w × d × h): 16 × 14 × 30 in / 41 × 36 × 76 cm</li><li>Sample Holder Layout: Rectangular</li><li>Gas Manifold Layout: 8 × 10 Array</li><li>Center to Center Spacing Between Positions: 0.8 in / 2.03 cm</li><li>Test Tube Diameter: 10–17 mm OD</li><li>Gas Flow Control On/Off Valve: Every row of 8</li><li>Stainless Steel Needles (Length × Gauge): 4.0 in × 19 ga / 102 mm × 19 ga</li><li>Needle Guide: Standard</li><li>Hoist Assembly: Dual Pulley &amp; Band Springs</li><li>Integrated Control Box with Timer for Nitrogen &amp; Heat: Standard</li><li>Built-in Gas Regulator Input: 30–110 psig</li><li>Acid Resistant Coating (Option Code -RT): Optional</li></ul><h5>OA-SYS Heating Device Specifications</h5><ul><li>Model Number: 9156</li><li>Outside Dimensions: 16 × 14 × 6.5 in / 41 × 36 × 15 cm</li><li>Total Wattage: 900 W</li><li>Temperature Range: 30–120 °C</li><li>Temperature Controller Type: Digital Electronic with LED Display</li><li>Controller Accuracy: ±2 °C</li></ul><h4>80 Position MULTIVAP (No Heater)</h4><ul><li>Heater Type: None</li><li>Instrumental Catalog Number: 11880-O</li><li>Number of Sample Positions: 80</li><li>Overall Dimension (w × d × h): 13 × 15 × 26 in / 33 × 38 × 66 cm</li><li>Sample Holder Layout: Rectangular</li><li>Gas Manifold Layout: 8 × 10 Array</li><li>Center to Center Spacing Between Positions: 0.8 in / 2.03 cm</li><li>Test Tube Diameter: 10–17 mm OD</li><li>Gas Flow Control On/Off Valve: Every row of 8</li><li>Stainless Steel Needles (Length × Gauge): 4.0 in × 19 ga / 102 mm × 19 ga</li><li>Needle Guide: Standard</li><li>Hoist Assembly: Dual Pulley &amp; Band Springs</li><li>Integrated Control Box with Timer for Nitrogen &amp; Heat: N/A</li><li>Built-in Gas Regulator Input: 30–110 psig</li><li>Acid Resistant Coating (Option Code -RT): Optional</li></ul><h3>ACCESSORIES</h3><ul><li>Custom sized inserts (cat# NA1881, cat# NA1882)</li><li>Pasteur pipette adapters (cat# NA0636, cannot be used with needle guide)</li><li>Luer plugs (cat# NA1307)</li><li>Pressure reducing regulator 0-160 psi (cat# NA0630)</li><li>Various needle sizes and gauges</li></ul>

Organomation 100 Position MULTIVAP Nitrogen Evaporator

The 100 position MULTIVAP parallel evaporator is a water bath model. This instrument contains a rectangular gas distribution system mounted on a frame and dual post assembly. 

The 100 position MULTIVAP parallel evaporator is a water bath model. This instrument contains a rectangular gas distribution system mounted on a frame and dual post assembly. The manifold delivers nitrogen gas to the needles or glass pipettes, which direct the gas onto the sample’s surface. This method results in rapid solvent evaporation and sample concentration. In order to conserve nitrogen gas, the manifold has a toggle switch for every row of 10 samples, which allows individual rows to be shut off when evaporating batches of less than 100 samples. Nitrogen gas flow is also controlled by an adjustable flow meter and a built-in pressure regulator.The 100 position MULTIVAP small vial evaporator uses a heated water bath to reach evaporative temperatures ranging from 30°C to 100°C. An unheated version is available for evaporations that will be performed at ambient temperatures. Sample racks are customized within a range of 11-22 mm for the user’s sample size. Please specify sample size (outside diameter and length to nearest 0.1 mm) when placing an order. All models can withstand contact with organic solvents; however acid resistant models are also available for use with corrosive solutions.<ul><li>Capacity: Evaporate batches of up to 100 samples, with outside diameters of up to 22 mm</li><li>Precise: Digital controls allow exact temperature regulation</li><li>Optimum Heat Transfer: The water bath provides even heating and optimum heat transfer up to 100°C</li><li>Consistent: Uniform evaporation across all samples with no adjustment needed between runs</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Organomation_100_Position_MULTIVAP_Nitrogen_Evaporator_2_e617ff2a8f.jpg" alt="Organomation 100 Position MULTIVAP Nitrogen Evaporator." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Organomation_100_Position_MULTIVAP_Nitrogen_Evaporator_2_e617ff2a8f.jpg 114w," sizes="100vw" width="1054" height="1440"><h3>STANDARD FEATURES</h3><ul><li>Adjustable flow meter, 0-50 lpm</li><li>Dual band hoist spring assembly</li><li>High temperature limit switch for safety</li><li>Safety control cover plate</li><li>Digital temperature controller</li><li>Electronic timer</li><li>Nitrogen filter</li><li>Gas distribution manifold</li><li>Built-in pressure reducing regulator</li><li>Needle guide</li></ul><h3>OPTIONS&nbsp;</h3><ul><li>220v wiring harness (Option Code# -2), Cat# 11300-2</li><li>Z-Purge/positive pressure purge case (Option Code# -Z), Cat# 11300-Z</li><li>Acid resistant coating on instrument and needles (Option Code# -RT), Cat# 11300-RT</li><li>Manifold and stand only: no heating platform (Option Code -O), Cat# 11300-O</li></ul><h3>SPECS</h3><h4>100 Position MULTIVAP (Water Bath)</h4><ul><li>Heater Type: Water Bath</li><li>Instrumental Catalog Number: 11300</li><li>Number of Sample Positions: 100</li><li>Overall Dimension (w × d × h): 19 × 17 × 34 in / 48 × 43 × 86 cm</li><li>Sample Holder Layout: Square</li><li>Gas Manifold Layout: 10 × 10 Array</li><li>Center to Center Spacing Between Positions: 1.0 in / 2.54 cm</li><li>Test Tube Diameter: 11–22 mm OD</li><li>Gas Flow Control On/Off Valve: Every row of 10</li><li>Gas Flow Meter Range: 0–50 L/min</li><li>Stainless Steel Needles (Length × Gauge): 4.0 in × 19 ga / 102 mm × 19 ga</li><li>Needle Guide: Standard</li><li>Hoist Assembly: Dual Pulley &amp; Band Springs</li><li>Built-in Gas Regulator Input: 30–110 psig</li><li>Acid Resistant Coating (Option Code -RT): Optional</li></ul><h5>OA-SYS Heating Device Specifications</h5><ul><li>Model Number: 11196</li><li>Inside Dimensions (Diameter × Depth): 11 × 11 × 5.5 in / 28 × 28 × 14 cm</li><li>Outside Dimensions (w × d × h): 19 × 17 × 7 in / 48 × 43 × 18 cm</li><li>Total Wattage: 1100 W</li><li>Temperature Range: 30–100 °C</li><li>Temperature Controller Type: Digital Electronic with LED Display</li><li>Controller Accuracy: ±2 °C</li></ul><h4>100 Position MULTIVAP (No Heater)</h4><ul><li>Heater Type: None</li><li>Instrumental Catalog Number: 11300-O</li><li>Number of Sample Positions: 100</li><li>Overall Dimension (w × d × h): 14 × 14 × 26 in / 35.5 × 35.5 × 66 cm</li><li>Sample Holder Layout: Square</li><li>Gas Manifold Layout: 10 × 10 Array</li><li>Center to Center Spacing Between Positions: 1.0 in / 2.54 cm</li><li>Test Tube Diameter: 11–22 mm OD</li><li>Gas Flow Control On/Off Valve: Every row of 10</li><li>Gas Flow Meter Range: 0–50 L/min</li><li>Stainless Steel Needles (Length × Gauge): 4.0 in × 19 ga / 102 mm × 19 ga</li><li>Needle Guide: Standard</li><li>Hoist Assembly: Dual Pulley &amp; Band Springs</li><li>Built-in Gas Regulator Input: 30–110 psig</li><li>Acid Resistant Coating (Option Code -RT): Optional</li></ul><h3>ACCESSORIES</h3><ul><li>Custom sized racks (cat# NA1361)</li><li>Pasteur pipette adapters (cat# NA0636, cannot be used with needle guide)</li><li>Luer plugs (cat# NA1307)</li><li>Pressure reducing regulator 0-160 psi (cat# NA0630)</li><li>Various needle sizes and gauges</li></ul>

Organomation 15 Position MICROVAP Nitrogen Evaporator

The 15 position MICROVAP benchtop evaporator is intended for small batch solvent evaporations, such as concentrations of sample groups in microcentrifuge tubes.

The 15 position MICROVAP benchtop evaporator is intended for small batch solvent evaporations, such as concentrations of sample groups in microcentrifuge tubes. It offers an effective and compact evaporation solution for samples in life science and pharmaceutical laboratories.Each MICROVAP uses minimal hood space while providing optimal temperature control for high and low boiling point solvents. The 15 position MICROVAP comes standard with stainless steel luer lock hubs and 4-inch x 19-gauge stainless steel needles for easy removal.Up to 15 samples can be accommodated at once, and the instrument comes customized for one sample size with an outside diameter of 10-22mm. If multiple sample sizes will be used with the instrument, inserts can be purchased for each additional sample size. &nbsp;Each of the sample blocks and inserts are customized to your samples for a precise fit and optimum heat transfer.Since these inserts and heat blocks are made-to-order, we will request that you deliver us three sample vials for each unique vial size upon placing an order for a 15 Position MICROVAP parallel evaporator. In situations where shipping sample vials to Organomation is not possible, we need precise measurements of your sample vials to be taken <a target="_blank" rel="noopener noreferrer" href="https://www.youtube.com/watch?v=BwDBasjstbE">as illustrated in this guide</a>.The digital temperature controls and solid aluminum heating unit provide uniform heat from room temperature up to 130°C with temperature accuracy of +/- 2°C. The newly redesigned heating unit allows excellent heat stability for low temperature applications. A version without heat is available for evaporations that will be performed at ambient temperature.<blockquote><a target="_blank" rel="noopener noreferrer" href="https://www.organomation.com/products/nitrogen-evaporators/microvap-classic/15-position-classic?hsLang=en">Discover our discontinued 15 Position MICROVAP model here for a discount. </a>Available while supplies last.</blockquote><ul><li>Compact Design: The MICROVAP has the smallest footprint of all of Organomation’s nitrogen evaporators</li><li>Ease of Use: Temperature and gas levels are easily set using the digital temperature controller and gas flow meter</li><li>Optimal Heat Transfer: Expertly machined heat block provides efficient heat transfer to sample tubes</li><li>Versatility: Easily concentrate 96 well microplates using a conversion kit</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Organomation_15_Position_MICROVAP_Nitrogen_Evaporator_2_af9f41666c.jpg" alt="Organomation 15 Position MICROVAP Nitrogen Evaporator." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Organomation_15_Position_MICROVAP_Nitrogen_Evaporator_2_af9f41666c.jpg 158w," sizes="100vw" width="2984" height="2953"><h3>STANDARD FEATURES</h3><ul><li>Adjustable flow meter</li><li>Digital temperature control</li><li>High temperature limit switch</li><li>4-inch x 19-gauge needles &nbsp;</li><li>Nitrogen filter</li><li>Anodized aluminum heat block&nbsp;</li></ul><h3>OPTIONS&nbsp;</h3><ul><li>230V wiring harness (Option Code -2), Cat# 11815-2</li><li>Z-Purge/positive pressure purge case (Option Code -Z), Cat# 11815-Z</li><li>Manifold and stand only; no heating platform (Option Code -O), Cat# 11815-O</li><li>Acid resistant coating on instrument and needles (Option Code -RT), Cat# 11815-RT</li></ul><h3>SPECS</h3><h4>15 Position MICROVAP (Dry Block)</h4><ul><li>Heater Type: Dry Block</li><li>Instrument Catalog Number: 11815</li><li>Number of Sample Positions: 15</li><li>Overall Dimensions (w × d × h): 10.0 × 13.0 × 18.0 in / 25.4 × 33.0 × 45.7 cm</li><li>Sample Holder Layout: Rectangular</li><li>Gas Manifold Layout: 3 × 5 Array</li><li>Center to Center Spacing Between Positions: 1.0 in / 2.54 cm</li><li>Heat Block Dimensions (w × d): 3.5 × 5.125 in / 8.9 × 13 cm</li><li>Test Tube Diameter: 10–22 mm OD</li><li>Gas Flow Control: Single toggle valve</li><li>Gas Flow Meter Range: 0–25 L/min</li><li>Stainless Steel Needles (Length × Gauge): 4.0 in × 19 ga / 102 mm × 19 ga</li><li>Hoist Assembly: Manual</li><li>Standard Gas Input Range: 20–30 psig</li><li>Gas Input Range with Optional Pressure Reducing Regulator: 30–160 psig</li></ul><h5>Heating Device Specs</h5><ul><li>Model Number: 1813A</li><li>Outside Dimensions (w × d × h): 10.0 × 9.75 × 3.5 in / 25.4 × 24.765 × 7.6 cm</li><li>Total Wattage: 180 W</li><li>Temperature Range: Room temp – 130 °C</li><li>Temperature Controller Type: Digital Electronic with LED Display</li><li>Controller Accuracy: ±2 °C</li></ul><h4>15 Position MICROVAP (No Heater)</h4><ul><li>Heater Type: None</li><li>Instrument Catalog Number: 11815-O</li><li>Number of Sample Positions: 15</li><li>Overall Dimensions (w × d × h): 10.5 × 12.5 × 15 in / 26.7 × 31.8 × 38.1 cm</li><li>Sample Holder Layout: Rectangular</li><li>Gas Manifold Layout: 3 × 5 Array</li><li>Center to Center Spacing Between Positions: 1.0 in / 2.54 cm</li><li>Heat Block Dimensions (w × d): 3.5 × 5.125 in / 8.9 × 13 cm</li><li>Test Tube Diameter: 10–22 mm OD</li><li>Gas Flow Control: Single toggle valve</li><li>Gas Flow Meter Range: 0–25 L/min</li><li>Stainless Steel Needles (Length × Gauge): 4.0 in × 19 ga / 102 mm × 19 ga</li><li>Hoist Assembly: Manual</li><li>Standard Gas Input Range: 20–30 psig</li><li>Gas Input Range with Optional Pressure Reducing Regulator: 30–160 psig</li></ul><h3>ACCESSORIES</h3><ul><li>Nitrogen generator (cat# NA1955)</li><li>Pressure reducing regulator, 30-160 psi in, 0-30 psi out</li><li>Pasteur pipette adapters (cat# NA0636)</li><li>15 position conversion kit</li><li>96 well plate conversion kit</li><li>Various needles sizes and gauges</li></ul>

Organomation 24 Position MICROVAP Nitrogen Evaporator

The 24 position MICROVAP small vial evaporator is intended for concentrating small volume, small batch samples, such as concentrations of groups of samples in microcentrifuge tubes and GC vials.

The 24 position MICROVAP small vial evaporator is intended for concentrating small volume, small batch samples, such as concentrations of groups of samples in microcentrifuge tubes and GC vials. It offers an effective and compact solution to evaporation of samples for life sciences and pharmaceutical laboratories.&nbsp;Each MICROVAP uses minimal hood space while providing optimal temperature control for high and low boiling point solvents. The 24 position MICROVAP comes standard with stainless steel luer lock hubs and 4-inch x 19-gauge stainless steel needles for easy removal.&nbsp;Up to 24 samples can be accommodated at once, and the instrument comes customized for one sample size with an outside diameter of 10 -17 mm. If multiple sample sizes will be used with the instrument, additional sample blocks can be purchased for each additional sample size. . &nbsp;Each of the sample blocks and inserts are customized to your samples for a precise fit and optimum heat transfer. Since these inserts and heat blocks are made-to-order, we will request that you deliver us three sample vials for each unique vial size upon placing an order for a 24 Position MICROVAP parallel evaporator. In situations where shipping sample vials to Organomation is not possible, we need precise measurements of your sample vials to be taken <a target="_blank" rel="noopener noreferrer" href="https://www.youtube.com/watch?v=BwDBasjstbE">as illustrated in this guide</a>.The digital temperature controls and solid aluminum heating unit provide uniform heat from room temperature up to 130°C with temperature accuracy of +/- 2°C. The newly redesigned heating unit allows excellent heat stability for low temperature applications. A version without heat is available for evaporations that will be performed at ambient temperature.<blockquote><a target="_blank" rel="noopener noreferrer" href="https://www.organomation.com/products/nitrogen-evaporators/microvap-classic/24-position-classic?hsLang=en">Discover our discontinued 24 Position MICROVAP model here for a discount.</a><a target="_blank" rel="noopener noreferrer" href="https://www.organomation.com/products/nitrogen-evaporators/microvap-classic/15-position-classic?hsLang=en"> </a>Available while supplies last.</blockquote><ul><li>Compact Design: The MICROVAP has the smallest footprint of all of Organomation’s nitrogen evaporators</li><li>Ease of Use: Temperature and gas levels are easily set using the digital temperature controller and gas flow meter</li><li>Optimal Heat Transfer: Expertly machined heat block provides efficient heat transfer to sample tubes</li><li>Versatility: Easily concentrate 96 well microplates using a conversion kit</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Organomation_24_Position_MICROVAP_Nitrogen_Evaporator_2_1601383cd9.jpg" alt="Organomation 24 Position MICROVAP Nitrogen Evaporator." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Organomation_24_Position_MICROVAP_Nitrogen_Evaporator_2_1601383cd9.jpg 152w," sizes="100vw" width="3024" height="3102"><h3>STANDARD FEATURES</h3><ul><li>Adjustable flow meter</li><li>Digital temperature control</li><li>High temperature limit switch</li><li>4-inch x 19 gauge needles</li><li>Nitrogen filter</li><li>Anodized aluminum dry block</li></ul><h3>OPTIONS&nbsp;</h3><ul><li>230V wiring harness (Option Code -2), Cat# 11824-2</li><li>Z-Purge/positive pressure purge case (Option Code -Z), Cat# 11824-Z</li><li>Manifold and stand only: no heating platform (Option Code -O), Cat# 11824-O</li><li>Acid resistant coating on instrument and needles (Option Code -RT), Cat# 11824-RT &nbsp;</li></ul><h3>SPECS</h3><h4>24 Position MICROVAP (Dry Block)</h4><ul><li>Heater Type: Dry Block</li><li>Instrument Catalog Number: 11824</li><li>Number of Sample Positions: 24</li><li>Overall Dimension (w × d × h): 10.0 × 13.0 × 18.0 in / 25.4 × 33.0 × 45.7 cm</li><li>Sample Holder Layout: Rectangular</li><li>Gas Manifold Layout: 4 × 6 Array</li><li>Center to Center Spacing Between Positions: 0.78 in / 1.98 cm</li><li>Test Tube Diameter: 10–17 mm OD</li><li>Gas Flow Control: Single toggle valve</li><li>Gas Flow Meter Range: 0–25 L/min</li><li>Stainless Steel Needles (Length × Gauge): 4.0 in × 19 ga / 102 mm × 19 ga</li><li>Hoist Assembly: Manual</li><li>Standard Gas Input Range: 20–30 psig</li><li>Gas Input Range with Optional Pressure Reducing Regulator: 30–160 psig</li></ul><h5>Heating Device Specs</h5><ul><li>Model Number: 1813A</li><li>Outside Dimensions (w × d × h): 10.0 × 9.75 × 3.5 in / 25.4 × 24.765 × 7.6 cm</li><li>Total Wattage: 180 W</li><li>Temperature Range: Room temp – 130 °C</li><li>Temperature Controller Type: Digital Electronic with LED Display</li><li>Controller Accuracy: ±2 °C</li></ul><h4>24 Position MICROVAP (No Heater)</h4><ul><li>Heater Type: None</li><li>Instrument Catalog Number: 11824-O</li><li>Number of Sample Positions: 24</li><li>Overall Dimension (w × d × h): 10.5 × 12.5 × 15.0 in / 21.6 × 33.0 × 35.6 cm</li><li>Sample Holder Layout: Rectangular</li><li>Gas Manifold Layout: 4 × 6 Array</li><li>Center to Center Spacing Between Positions: 0.78 in / 1.98 cm</li><li>Test Tube Diameter: 10–17 mm OD</li><li>Gas Flow Control: Single toggle valve</li><li>Gas Flow Meter Range: 0–25 L/min</li><li>Stainless Steel Needles (Length × Gauge): 4.0 in × 19 ga / 102 mm × 19 ga</li><li>Hoist Assembly: Manual</li><li>Standard Gas Input Range: 20–30 psig</li><li>Gas Input Range with Optional Pressure Reducing Regulator: 30–160 psig</li></ul><h3>ACCESSORIES</h3><ul><li>Nitrogen generator (cat# NA1955)</li><li>Pressure reducing regulator, 30-160 psi in, 0-30 psi out</li><li>Pasteur pipette adapters (cat# NA0636)</li><li>15 position conversion kit</li><li>96 well plate conversion kit</li><li>Various needles sizes and gauges</li></ul>

Organomation MICROVAP Microplate Evaporator

The single plate MICROVAP microplate evaporator is one of the most compact sample concentrators available, and it continues to meet the needs of the life science and pharmaceutical industries.

The single plate MICROVAP microplate evaporator is one of the most compact sample concentrators available, and it continues to meet the needs of the life science and pharmaceutical industries. This microplate concentrator is ideal for laboratories needing efficient solutions for the gentle evaporation of high capacity, low volume samples in 96-well microplates and 96-well deep plates. The gas delivery manifold offers continuous evaporation via 2-inch x 19-gauge stainless steel needles.In order to evaporate solvents with a wide range of boiling points effectively, the digital temperature controls and solid aluminum heating unit provide uniform heat from room temperature up to 130°C with temperature accuracy of +/- 2°C. The newly redesigned heating unit allows excellent heat stability for low temperature applications. A version without heat is available for evaporations that will be performed at ambient temperatures.&nbsp;<blockquote><a target="_blank" rel="noopener noreferrer" href="https://www.organomation.com/products/nitrogen-evaporators/microvap-classic/microplate-evaporator-classic?hsLang=en">Discover our discontinued Single Plate MICROVAP model here for a discount.</a> Available while supplies last.</blockquote><ul><li>Compact Design: The MICROVAP has the smallest footprint of all of Organomation’s nitrogen evaporators</li><li>Ease of Use: Temperature and gas levels are easily set using the digital temperature controller and gas flow meter</li><li>Precise: Digital controls allow exact temperature regulation</li><li>Versatility: Easily concentrate 15 or 24 tube samples using a conversion kit</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Organomation_MICROVAP_Microplate_Evaporator_2_6fec84ea62.jpg" alt="Organomation MICROVAP Microplate Evaporator." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Organomation_MICROVAP_Microplate_Evaporator_2_6fec84ea62.jpg 144w," sizes="100vw" width="3024" height="3286"><h3>STANDARD FEATURES</h3><ul><li>Adjustable flow meter</li><li>Digital temperature control</li><li>High temperature limit switch</li><li>2-inch x 19-gauge needles</li><li>Nitrogen filter</li><li>Anodized aluminum dry block</li></ul><h3>OPTIONS&nbsp;</h3><ul><li>230v wiring harness (Option Code -2), Cat# 11801-2</li><li>Z-Purge/positive pressure purge case (Option Code -Z), Cat# 11801-Z</li><li>Manifold and stand only; no heating platform (Option Code -O), Cat# 11801-O</li><li>Acid resistant coating on instrument and needles (Option Code -RT), Cat# 11801-RT</li></ul><h3>SPECS</h3><h4>Single Plate MICROVAP (Dry Block)</h4><ul><li>Heater Type: Dry Block</li><li>Instrumental Catalog Number: 11801</li><li>Number of Sample Positions: 1</li><li>Overall Dimension (w × d × h): 10.0 × 13.0 × 18.0 in / 25.4 × 33.0 × 45.7 cm</li><li>Gas Manifold Layout: 8 × 12 Array</li><li>Center to Center Spacing Between Positions: 0.354 in / 9.0 mm</li><li>Microplate Dimensions (w × d): 3.375 × 5.0 in / 8.5 × 13 cm</li><li>Gas Flow Control: Single toggle valve</li><li>Gas Flow Meter Range: 0–25 L/min</li><li>Stainless Steel Needles (Length × Gauge): 2.0 in × 19 ga / 51 mm × 19 ga</li><li>Hoist Assembly: Manual</li><li>Standard Gas Input Range: 20–30 psig</li><li>Gas Input Range with Optional Pressure Reducing Regulator: 30–160 psig</li></ul><h5>Heating Device Specs</h5><ul><li>Model Number: 1813A</li><li>Outside Dimensions (w × d × h): 10.0 × 8.375 × 3.5 in / 25.4 × 21.3 × 7.6 cm</li><li>Total Wattage: 180 W</li><li>Temperature Range: Room temp – 130 °C</li><li>Temperature Controller Type: Digital Electronic with LED Display</li><li>Controller Accuracy: ±2 °C</li></ul><h4>Single Plate MICROVAP (No Heater)</h4><ul><li>Heater Type: None</li><li>Instrumental Catalog Number: 11801-O</li><li>Number of Sample Positions: 1</li><li>Overall Dimension (w × d × h): 10.5 × 12.5 × 15.0 in / 26.7 × 31.8 × 38.1 cm</li><li>Gas Manifold Layout: 8 × 12 Array</li><li>Center to Center Spacing Between Positions: 0.354 in / 9.0 mm</li><li>Microplate Dimensions (w × d): 3.375 × 5.0 in / 8.5 × 13 cm</li><li>Gas Flow Control: Single toggle valve</li><li>Gas Flow Meter Range: 0–25 L/min</li><li>Stainless Steel Needles (Length × Gauge): 2.0 in × 19 ga / 51 mm × 19 ga</li><li>Hoist Assembly: Manual</li><li>Standard Gas Input Range: 20–30 psig</li><li>Gas Input Range with Optional Pressure Reducing Regulator: 30–160 psig</li></ul><h3>ACCESSORIES</h3><ul><li>Pressure reducing regulator, 30-160 psi in, 0-30 psi out</li><li>Pasteur pipette adapters (cat# NA0636)</li><li>15 position conversion kit</li><li>96 well plate conversion kit</li><li>Various needles sizes and gauges</li></ul>

Organomation MICROVAP Triple Microplate Evaporator

The triple plate MICROVAP microplate evaporator combines three 96 needle manifolds and three heat blocks into a single platform.

The triple plate MICROVAP microplate evaporator combines three 96 needle manifolds and three heat blocks into a single platform. This allows for simultaneous evaporation of up to three 96 well plates. The triple plate MICROVAP’s solid aluminum heating units provide consistent temperature for uniform evaporation rates throughout all three plates.Each 96-needle manifold is equipped with its own toggle switch to shut down gas flow when all three microplates are not in use to conserve nitrogen gas, saving laboratories money. A convenient dual band spring hoist assembly ensures ease of use for the operator when lowering and raising the needle manifolds. The digital temperature controller is easy to read and allows temperature to be controlled with an accuracy of +/- 2 °C up to the maximum temperature of 130°C. &nbsp;An adjustable 0-100 LPM flow meter is for precise control over the nitrogen gas delivery system.&nbsp;<ul><li>High Throughput: Evaporate up to three 96 well plates at once</li><li>Ease of Use: Temperature and gas levels are easily set using the digital temperature controller and gas flow meter</li><li>Precise: Digital controls allow exact temperature regulation</li><li>Cost-Effective: Conserve nitrogen by turning gas flow on and off at each plate</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Organomation_MICROVAP_Triple_Microplate_Evaporator_2_d67a3e5ffd.jpg" alt="Organomation MICROVAP Triple Microplate Evaporator." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Organomation_MICROVAP_Triple_Microplate_Evaporator_2_d67a3e5ffd.jpg 156w," sizes="100vw" width="1400" height="1400"><h3>STANDARD FEATURES</h3><ul><li>Adjustable flow meter</li><li>Digital temperature control</li><li>High temperature limit switch</li><li>High pressure tubing</li><li>2-inch x 19-gauge needles</li><li>Nitrogen filter</li><li>Anodized aluminum dry block&nbsp;</li></ul><h3>OPTIONS&nbsp;</h3><ul><li>220v wiring harness (Option Code -2), Cat# 11803-2</li><li>Z-Purge/positive pressure purge case (Option Code -Z), Cat# 11803-Z</li><li>Acid resistant coating on instrument and needles (Option Code -RT), Cat# 11803-RT</li></ul><h3>SPECS</h3><h4>12p N-EVAP (Dry Block)</h4><ul><li>Heater Type: Dry Block</li><li>Instrument Catalog Number: 11803</li><li>Number of Sample Plates: 3</li><li>Overall Dimension (w × d × h): 21.0 × 13.0 × 13.0 in / 53.3 × 33.02 × 33.02 cm</li><li>Gas Manifold Layout: Triple 8 × 12 Array</li><li>Center to Center Spacing Between Positions: 0.354 in / 9.0 mm</li><li>Microplate Dimensions (w × d): 3.375 × 5.0 in / 8.5 × 13 cm</li><li>Gas Flow Control: Single toggle valve</li><li>Gas Flow Meter Range: 0–100 L/min</li><li>Stainless Steel Needles (Length × Gauge): 2.0 in × 19 ga / 51 mm × 19 ga</li><li>Hoist Assembly: Dual Band Spring Hoist Assembly</li><li>Standard Gas Input Range: 30 psig</li><li>Gas Input Range with Optional Pressure Reducing Regulator: 30–160 psig</li></ul><h5>Heating Device Specs</h5><ul><li>Model Number: 54243</li><li>Outside Dimensions (w × d × h): 24.0 × 9.5 × 3.0 in / 61.0 × 22.9 × 7.6 cm</li><li>Total Wattage: 540 W</li><li>Temperature Range: 40–130 °C</li><li>Temperature Controller Type: Digital Electronic with LED Display</li><li>Controller Accuracy: ±2 °C</li></ul><h3>ACCESSORIES</h3><ul><li>Pressure reducing regulator, 30-150 psi in, 0-30 psi out</li></ul>

Products from category Sample preparation automation from Organomation - page 1

Related content

Affinity, Gel Filtration, Size Exclusion Chromatography: Repurposing Kinase Inhibitors for Malaria

Research from IOCB Prague reveals a previously unknown mechanism of genetic transcription

Food Adulteration and How It Is Revealed by Analytical Chemistry