<div><div><div>Scientists at IOCB Prague have developed a breakthrough technology that streamlines aptamer development. The new method integrates several biochemical and bioinformatics steps and paves the way for new diagnostic and therapeutic applications. Ongoing applications include wearable sensors that monitor selected biomarkers in real time and provide early warnings of impending health complications. The findings were published in Nature Communications.</div></div><div>Aptamers are short DNA or RNA strands that can recognize and bind to a specific target molecule with high precision. Similar to antibodies, they can be used to detect these molecules or modulate their activity. Unlike antibodies, they are much more stable, can be produced synthetically, and can be chemically modified to achieve the desired properties. As a result, they can offer capabilities that cannot be achieved with antibodies.</div><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/UOCHB_Nova_technologie_inovuje_vyvoj_aptameru_syntetickych_alternativ_protilatek_2_81e99b9900.jpg" alt="IOCHB Prague: New technology streamlines the development of aptamers, synthetic alternatives to antibodies: Chemically modified DNA aptamer bound to the target protein." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_UOCHB_Nova_technologie_inovuje_vyvoj_aptameru_syntetickych_alternativ_protilatek_2_81e99b9900.jpg 228w," sizes="100vw" width="1343" height="916">As demand grows for accurate and rapid diagnostic tools, aptamers are often better suited to these applications than antibodies. However, developing aptamers is both experimentally demanding and time-consuming. A team of scientists from IOCB Prague, led by Dr. Marek Ondruš and <a target="_blank" rel="noopener noreferrer" href="https://hocek.group.uochb.cz/en">Prof. Michal Hocek</a>, has now developed a technology that significantly shortens the development process.“Developing an aptamer is often like looking for a needle in a haystack. Among trillions of different DNA sequences, we search for the one that binds strongly and specifically to a target molecule. Our new approach first screen for ‘aptamer families’ – hundreds of related sequences – and then identify the best-performing member of the family. This approach can reduce development time from several months to only a few days,” says Marek Ondruš.<blockquote>Video:<a target="_blank" rel="noopener noreferrer" href="https://www.youtube.com/watch?v=_3zXUeVMugU"> New technology streamlines the development of aptamers, synthetic alternatives to antibodies&nbsp;</a></blockquote>The team has also expanded the potential applications of aptamers by chemically modifying their building blocks. For example, introducing functional groups similar to those found naturally in amino acids allows the resulting molecules to combine the advantages of both DNA and antibodies: Their sequence is encoded by the order of nucleotides in DNA, while the attached chemical modifications greatly expand their ability to recognize biologically relevant targets and mimic interactions between proteins that are underlying many biological processes.The researchers demonstrated the potential of this new method using the human insulin receptor, a key protein that regulates blood sugar levels. They developed an aptamer that specifically binds to the receptor and elucidated the molecular basis of this interaction using cryo-electron microscopy. “We have shown that chemically introduced functional groups play a crucial role not only in target recognition and formation of the aptamer–protein complex, but also in stabilizing the DNA aptamer’s structure. Our findings provide new insights into how chemically modified nucleic acids can mimic key properties of proteins,” says Marek Ondruš.In the future, the technology could complement – or, in some applications, even replace – antibody-based diagnostic tools. Researchers are collaborating with <a target="_blank" rel="noopener noreferrer" href="http://iocbtech.cz/">IOCB Tech</a> on its further development, as the company helps to bring discoveries from IOCB Prague into practical applications.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/UOCHB_Nova_technologie_inovuje_vyvoj_aptameru_syntetickych_alternativ_protilatek_9694c21671.jpg" alt="IOCHB Prague/Tomáš Belloň: New technology streamlines the development of aptamers, synthetic alternatives to antibodies: Dr. Marek Ondruš, first author of the study, and Prof. Michal Hocek, head of the Bioorganic and Medicinal Chemistry of Nucleic Acids research group at IOCB Prague." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_UOCHB_Nova_technologie_inovuje_vyvoj_aptameru_syntetickych_alternativ_protilatek_9694c21671.jpg 234w," sizes="100vw" width="2000" height="1335"><blockquote><h4>Original article</h4><h4><a target="_blank" rel="noopener noreferrer" href="https://www.nature.com/articles/s41467-026-73676-y#citeas">Expedient single-round selection of hyper-modified aptamer targeting insulin receptor from over-represented dually nucleobase-modified DNA libraries</a></h4>ablo Alberto Franco-Urquijo, Marek Ondruš, Jaroslav Kurfürst, Jana Škerlová, Irena Selicharová, Lucie Mužíková Čechová, Hana Šváchová, Alena Semerádtová, Anatolij Filimoněnko, Adéla Fejfarová, Jiří Homola, Tomáš Kouba &amp; Michal HocekNat. Commun., 2026<a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1038/s41467-026-73676-y">https://doi.org/10.1038/s41467-026-73676-y</a>&nbsp;<h6>licenced under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/">CC-BY 4.0</a></h6></blockquote><h4>Abstract</h4>Discovery of functional nucleic acids from randomized libraries typically relies on multiple, time-consuming iterative rounds of in vitro selection with low success rate. Here, we present a single-round selection strategy for rapid screening of multiple over-represented nucleobase-modified DNA libraries and various selection conditions, capable of identifying high-affinity modified aptamers. Double partition followed by amplification of eluted sequences, NGS analysis and clustering provides fast identification of aptamer candidates. Screening of modified DNA libraries containing modified adenine and uracil nucleotides bearing hydrophobic aromatic phenyl and indole moieties results in development of an aptamer binding human insulin receptor with sub-nanomolar affinity and exquisite specificity. Cryo-EM structure reveals the importance of each aromatic modification, either in stabilizing the secondary structure or facilitating interactions with the protein surface. This approach addresses the main drawbacks of aptamer selection and has potential for high-throughput screening and accelerating the development of next-generation aptamers for diagnostics or therapeutics.</div>

New technology streamlines the development of aptamers, synthetic alternatives to antibodies

Clarity 10.2 expands instrument control capabilities with new control modules and updates the MS extension to help you work more efficiently.<h4><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/999">Clarity</a> 10.2 highlights</h4><ul><li>New and updated control modules</li><li>Improved MS data import and export</li><li>Obsolete hardware support ended</li></ul><h4>Instrument control modules</h4>Clarity 10.2 introduces new instrument control modules from Annuo (AS-3117, FAS-3823) and updated instrument controls form Sykam and Ecom.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Data_Apex_Instrument_control_modules_5de26782b0.jpg" alt="DataApex: Instrument control modules" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Data_Apex_Instrument_control_modules_5de26782b0.jpg 228w," sizes="100vw" width="380" height="260"><h4>MS data import/export improvements</h4>Clarity improves MS data exchange, especially for *.cdf files. MS instruments now support export and import of multiple spectral data and non-spectral signal data in the same CDF file. Import also better handles uniform sampling information, m/z Step values, scale factors, and file names with non-ASCII characters. Exporting individual chromatogram signals from MS instruments is now available through a separate Export Chromatogram dialog.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Data_Apex_MS_data_import_export_improvements_a7967a4020.jpg" alt="DataApex: MS data import-export improvements" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Data_Apex_MS_data_import_export_improvements_a7967a4020.jpg 228w," sizes="100vw" width="378" height="259"><h4>Obsolete hardware support terminated</h4>Due to changes in Windows driver security requirements, this update discontinues support for obsolete hardware, including INT7, INT9, U-PAD, U-PAD2, and CB20.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Data_Apex_Obsolete_hardware_support_terminated_24d9329419.jpg" alt="DataApex: Obsolete hardware support terminated" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Data_Apex_Obsolete_hardware_support_terminated_24d9329419.jpg 228w," sizes="100vw" width="378" height="259"><blockquote>Explore the complete list of all changes, fixes, and additions in version 10.2.👉<a target="_blank" rel="noopener noreferrer" href="https://www.dataapex.com/version_history?product=1">See the complete changelog&nbsp;</a></blockquote>

Clarity Chromatography Software 10.2 released!

🎤Dr. Leigh Terry (University of Alabama)In this episode of Concentrating on Chromatography, we sit down with Dr. Leigh Terry from the University of Alabama to explore one of the biggest challenges in environmental analysis today: understanding—and accurately measuring—PFAS in water systems.While most regulatory methods focus on a small number of compounds like PFOA and PFOS, there may be thousands of PFAS compounds in the environment—and much of that burden goes undetected.<h4>In this episode, we cover:</h4><ul><li>Why PFAS are called “forever chemicals” (and why that label is evolving)</li><li>The limitations of targeted LC-MS/MS methods</li><li>What the fluorine mass balance problem reveals about PFAS destruction</li><li>How combustion ion chromatography (CIC) helps measure total organofluorine</li><li>Why “99.99% removal” doesn’t always mean what you think</li><li>Where PFAS actually end up in wastewater treatment systems</li><li>The most effective technologies for PFAS removal today</li><li>Why drinking water may only account for ~20% of total PFAS exposure</li></ul><h4>Key Insight:</h4>Even when analyzing dozens of PFAS compounds, researchers may only be capturing a small fraction of total organic fluorine—raising major questions about how we monitor and regulate these contaminants.<h3>Video Transcription</h3>In this episode of Concentrating on Chromatography, Dr. Leigh Terry discusses PFAS contamination in drinking water, the analytical challenges associated with measuring these compounds, current treatment technologies, and future directions for monitoring and regulation. The conversation highlights how analytical chemistry, environmental engineering, and public health intersect in addressing one of today's most discussed classes of emerging contaminants.<h4>Understanding PFAS and Their Significance</h4><h5>The University of Alabama Water Quality Research Center</h5>Dr. Leigh Terry is part of the University of Alabama's Center for Water Quality Research. The center operates an analytical laboratory focused on drinking water quality and the detection of contaminants at extremely low concentrations.The laboratory specializes in:<ul><li>Drinking water analysis</li><li>Organic contaminants</li><li>Emerging contaminants</li><li>PFAS monitoring</li><li>Water quality research</li></ul>Their work supports both research initiatives and practical solutions for water utilities and environmental agencies.<h4>Why Focus on PFAS?</h4>Although PFAS compounds have existed since the 1940s, public awareness has increased dramatically only in recent years.According to Dr. Terry, several factors contributed to the rapid growth of PFAS research:<ul><li>Increased media attention</li><li>New regulatory initiatives</li><li>Growing evidence of human exposure</li><li>Expanding research opportunities</li><li>Greater understanding of potential health risks</li></ul>PFAS are not new contaminants. Rather, society is only beginning to understand their prevalence in the environment and their potential impacts on human health.<h4>The Development of Standardized PFAS Methods</h4>One major advancement in PFAS analysis has been the development of standardized EPA methods.These methods allow:<ul><li>Consistent testing procedures</li><li>Comparable results between laboratories</li><li>Regulatory monitoring</li><li>Reliable data interpretation</li></ul>Dr. Terry notes that many of these standardized approaches began appearing around 2018–2019, providing a common framework for analytical laboratories and researchers.<h4>How Large Is the PFAS Universe?</h4>Many people are familiar with PFOA and PFOS, two of the most heavily studied PFAS compounds. However, these represent only a small fraction of the broader PFAS family.PFOA and PFOS are often referred to as:<ul><li>Legacy PFAS compounds</li><li>Original PFAS contaminants</li><li>Early commercial PFAS chemicals</li></ul>The challenge is that even minor modifications to molecular structure create entirely new PFAS compounds.Researchers estimate:<ul><li>Thousands of PFAS compounds exist</li><li>Some estimates exceed 10,000 compounds</li><li>Exact numbers depend on how PFAS are defined</li></ul>Scientific debate continues regarding classification and definition, making precise counting difficult.<h4>Why PFAS Are Called "Forever Chemicals"</h4>Dr. Terry notes that the phrase "forever chemicals" has become widely used, although she suggests the terminology could benefit from rebranding.PFAS persistence results from two key chemical properties.<h5>1. Amphiphilic Structure</h5>PFAS molecules contain:<ul><li>A water-loving (hydrophilic) head group</li><li>A water-repelling (hydrophobic) fluorinated tail</li></ul>This unusual combination allows PFAS to partition between:<ul><li>Water</li><li>Solids</li><li>Air-water interfaces</li><li>Foam</li></ul>Unlike many organic compounds, PFAS can interact effectively with multiple environmental phases.<h5>2. Extremely Strong Carbon–Fluorine Bonds</h5>The carbon–fluorine bond is among the strongest bonds in organic chemistry.As Dr. Terry explains:<ul><li>Large amounts of energy are required to break these bonds</li><li>Natural degradation processes are often ineffective</li><li>Destruction can require highly aggressive treatment conditions</li></ul>These properties make PFAS extremely persistent in both environmental systems and biological organisms.<h4>Toxicity, Regulations, and Environmental Behavior</h4><h5>Understanding PFAS Toxicity</h5>One of the biggest challenges in PFAS regulation is the incomplete understanding of toxicity.Dr. Terry explains that EPA regulations generally consider three factors:<ul><li>Presence in drinking water sources</li><li>Toxicity to humans</li><li>Availability of practical treatment options</li></ul>While some PFAS compounds are known to be harmful, many others remain insufficiently studied. Furthermore, PFAS often occur as mixtures rather than individual compounds.This creates important scientific questions:<ul><li>What is the toxicity of individual PFAS?</li><li>What is the toxicity of PFAS mixtures?</li><li>How should cumulative exposure be evaluated?</li></ul>These uncertainties continue to drive active research.<h4>What Happens to PFAS in Wastewater Treatment Plants?</h4>PFAS do not behave like many conventional contaminants.Rather than remaining fully dissolved in water, they often accumulate at interfaces such as:<ul><li>Water-solid interfaces</li><li>Water-air interfaces</li><li>Foam layers</li><li>Biological solids</li></ul>As a result:<ul><li>Some PFAS accumulate in biosolids</li><li>Some partition into foam</li><li>Some remain in treated effluent</li></ul>Their distribution depends on wastewater composition and treatment processes.<h4>Regulatory Monitoring and Targeted LC-MS Analysis</h4>Current EPA regulations focus on targeted analysis of specific PFAS compounds.Examples include:<ul><li>PFOA</li><li>PFOS</li></ul>Drinking water regulations currently establish maximum contaminant levels (MCLs) for these compounds at extremely low concentrations.Advantages of targeted LC-MS analysis include:<ul><li>Clearly defined analytes</li><li>Established regulatory limits</li><li>High analytical sensitivity</li><li>Reliable quantitation</li></ul>However, limitations remain:<ul><li>Only a small subset of PFAS is measured</li><li>Many PFAS compounds remain undetected</li><li>Total PFAS burden may be underestimated</li></ul>As Dr. Terry notes, targeted analysis provides only part of the overall picture.<h4>The Fluorine Mass Balance Problem</h4>One of the most important concepts discussed in the interview is fluorine mass balance.When PFAS degrade, fluorinated fragments may remain in the environment.This creates a critical question:Are treatment technologies truly destroying PFAS, or merely transforming them into shorter-chain PFAS compounds?To answer this, researchers perform fluorine mass balance calculations using:<ul><li>Targeted PFAS analysis</li><li>Fluoride measurements</li><li>Total organic fluorine measurements</li></ul>A successful destruction process should ultimately convert PFAS into fluoride ions rather than simply producing smaller PFAS molecules.<h4>Advanced Analysis, Treatment Technologies, and Future Directions</h4><h5>Combining Targeted and Bulk Fluorine Measurements</h5>Dr. Terry's group complements targeted LC-MS analysis with measurements of total organic fluorine.Approaches include:<ul><li>Absorbable Organic Fluorine (AOF)</li><li>Extractable Organic Fluorine (EOF)</li><li>Combustion Ion Chromatography (CIC)</li></ul>In these methods:<ul><li>Organic fluorine is captured</li><li>Samples are combusted</li><li>Released fluoride is quantified</li></ul>This provides insight into total fluorinated content, although contributions may originate from sources beyond PFAS, including pharmaceuticals and consumer products.<h4>Surprising Findings from Combined Analysis</h4>One important finding from wastewater studies was that targeted PFAS measurements accounted for only a small fraction of total organic fluorine.Dr. Terry reports that:<ul><li>Approximately 4% of measured AOF could be explained by targeted PFAS compounds</li><li>The majority of organic fluorine remained unidentified</li></ul>This suggests that environmental fluorine chemistry is considerably more complex than currently represented by routine monitoring programs.<h4>Preventing PFAS Contamination in the Laboratory</h4>PFAS analysis requires exceptionally strict quality control.Dr. Terry's laboratory routinely:<ul><li>Tests every new batch of SPE cartridges</li><li>Tests carbon tubes before use</li><li>Uses DI water blanks</li><li>Verifies consumables labeled as PFAS-free</li><li>Collects field blanks</li><li>Monitors analytical blanks throughout workflows</li></ul>These practices help prevent contamination from laboratory materials and consumables, a common challenge in ultra-trace PFAS analysis.<h4>Current PFAS Treatment Technologies</h4>Three technologies currently dominate PFAS removal in drinking water treatment:<ul><li>Granular Activated Carbon (GAC)</li><li>Ion Exchange Resins</li><li>Reverse Osmosis (RO)</li></ul>Selection depends on:<ul><li>PFAS concentration</li><li>Water quality</li><li>Local operating conditions</li><li>Utility infrastructure</li></ul>Although many emerging technologies are being investigated, these remain the most widely implemented solutions.<h4>Membrane Filtration and Pretreatment</h4>Dr. Terry collaborates with colleagues studying membrane-based PFAS treatment.Her own work focuses on pretreatment through biological filtration.The strategy involves:<ul><li>Removing natural organic matter</li><li>Reducing membrane fouling</li><li>Improving membrane performance</li><li>Extending operational efficiency</li></ul>This integrated approach demonstrates how multiple treatment technologies can work together to improve PFAS removal.<h4>Regional Monitoring Projects</h4>The University of Alabama team participates in EPA-supported monitoring efforts along the Gulf Coast.Their observations indicate:<ul><li>PFAS rarely occur alone</li><li>Multiple PFAS compounds frequently co-occur</li><li>Contamination often originates from identifiable point sources</li></ul>Examples include:<ul><li>Industrial facilities</li><li>Manufacturing operations</li><li>Military installations</li><li>Carpet manufacturing facilities</li></ul>Source identification remains a critical component of environmental monitoring programs.<h4>Future Directions for PFAS Monitoring</h4>Looking ahead, Dr. Terry sees several opportunities for improvement.Desired advances include:<ul><li>In situ monitoring technologies</li><li>Portable detection systems</li><li>Reduced analytical complexity</li><li>Lower instrument costs</li><li>Less expensive consumables</li><li>Faster analysis workflows</li></ul>Current PFAS testing requires substantial expertise, specialized instrumentation, and rigorous quality control, making widespread implementation challenging.<h4>Dr. Terry's Perspective on Long-Term Solutions</h4>When asked what major PFAS challenge she would most like to solve, Dr. Terry offered a broader perspective.Rather than focusing solely on remediation, she emphasized prevention.Her view is that society should:<ul><li>Better evaluate chemical toxicity before commercialization</li><li>Assess risks before large-scale deployment</li><li>Reduce introduction of harmful compounds into the environment</li><li>Support utilities tasked with contaminant removal</li></ul>She notes that water utilities often bear the responsibility of removing contaminants they did not create, highlighting the need for broader societal and regulatory support.<h4>Final Thoughts</h4>Dr. Terry encourages consumers to:<ul><li>Learn where their drinking water originates</li><li>Read annual water quality reports</li><li>Stay informed about local water quality</li><li>Consider appropriate home filtration where needed</li></ul>At the same time, she emphasizes confidence in municipal water systems and the importance of continued investment in water quality research, monitoring, and treatment technologies.<h4>Conclusion</h4>PFAS remain one of the most complex challenges in environmental chemistry and water treatment. Through advanced analytical methods such as LC-MS/MS, combustion ion chromatography, fluorine mass balance approaches, and large-scale monitoring programs, researchers like Dr. Leigh Terry are helping improve our understanding of these persistent contaminants.The interview highlights that solving the PFAS challenge will require a combination of better analytical tools, improved treatment technologies, stronger regulatory frameworks, and a greater emphasis on prevention before contaminants enter the environment.<blockquote>This text has been automatically transcribed from a video presentation using AI technology. It may contain inaccuracies and is not guaranteed to be 100% correct.</blockquote><blockquote><h4>Concentrating on Chromatography Podcast</h4>Dive into the frontiers of chromatography, mass spectrometry, and sample preparation with host David Oliva. Each episode features candid conversations with leading researchers, industry innovators, and passionate scientists who are shaping the future of analytical chemistry. From decoding PFAS detection challenges to exploring the latest in AI-assisted liquid chromatography, this show uncovers practical workflows, sustainability breakthroughs, and the real-world impact of separation science. Whether you’re a chromatographer, lab professional, or researcher you'll discover inspiring content!You can find Concentrating on Chromatography Podcast in podcast apps:<ul><li><a target="_blank" rel="noopener noreferrer" href="https://open.spotify.com/show/1wZg67rCjoGju4yhqxI3tL">Spotify</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://podcasts.apple.com/tz/podcast/concentrating-on-chromatography/id1788429185">Apple podcast</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://podscan.fm/podcasts/concentrating-on-chromatography">podscan</a></li></ul>and on <a target="_blank" rel="noopener noreferrer" href="https://www.youtube.com/@ChromatographyTalk/videos">YouTube channel</a></blockquote>

PFAS in Water: Why We’re Missing 96% of the Problem

Article

Product

Video

Scientists

Environment

Water

Interview

Science and research

Software

Since 1991 DataApex develops and manufactures chromatography data stations. DataApex is constantly striving to provide users with efficient and up-to-date tools for chromatography data processing.

DataApex

The Institute of Organic Chemistry and Biochemistry of the Czech Academy of Sciences (IOCB Prague) is a leading scientific institution in the Czech Republic, recognized internationally. Its primary mission is basic research in the fields of chemical biology and medicinal chemistry, organic and material oriented chemistry, chemistry of natural compounds, biochemistry and molecular biology, physical chemistry, theoretical chemistry, and analytical chemistry. 

Institute of Organic Chemistry and Biochemistry of the Czech Academy of Sciences

Organomation, founded in 1959, designs and manufactures high-quality nitrogen evaporators and extraction systems. Known for innovation and durability, their lab instruments are used globally for efficient sample preparation with strong customer support.

Organomation

Watrex SYRINGE FILTERS

Syringe filters (filters for syringes) are a universal tool that ensures sample purity and prevents contamination of analytical instruments.

Syringe filters (filters for syringes) are a universal tool that ensures sample purity and prevents contamination of analytical instruments. They are single-use filters used for precise filtration of liquids before their application or analysis.Pore Size: Filters come in various pore sizes, ranging from 0.2 μm to 5 μm, depending on the required level of filtration. Smaller pores (e.g., 0.22 μm) are often used for sterilizing solutions, as they capture bacteria and other microorganisms.We offer syringe filters in the following sizes: 4 mm, 13 mm, 25 mm, and 30 mm, all available with pore sizes of 0.22 μm and 0.45 μm.Filter Material: Syringe filters are made from different materials that are compatible with various sample types. It is important to select the correct filter material based on the chemical composition of the sample. We offer syringe filters made from the following materials:<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Watrex_SYRINGE_FILTRY_b6ffda00e2.jpg" alt="Watrex: Watrex SYRINGE FILTERS" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Watrex_Watrex_SYRINGE_FILTRY_b6ffda00e2.jpg 245w," sizes="100vw" width="1808" height="1017"><h4>Nylon</h4><ul><li>Suitable for aqueous solutions and most organic solvents.</li><li>It has strong mechanical stability and excellent chemical compatibility with esters, bases, phenols, and alcohols.</li></ul><h4>PTFE (Polytetrafluoroethylene)</h4><ul><li>Chemically resistant to most organic solvents.</li><li>It has very broad chemical and thermal compatibility.</li><li>PTFE filters are recommended for strong acids and bases and are excellent for filtration and degassing chromatography.</li></ul><h4>PVDF (Polyvinylidene fluoride)</h4><ul><li>Suitable for biological samples.</li><li>It has good chemical resistance and low UV absorption.</li><li>Commonly used for filtering all water-based samples and most solvents.</li></ul><h4>PES (Polyester)</h4><ul><li>Ideal for water-based samples, especially biological ones, with a fast and high flow rate.</li></ul><h4>MCE (Mixed Cellulose Esters)</h4><ul><li>Ideal for aqueous samples, tissue cultures, and sensitive biological samples.</li><li>It has lower chemical resistance, excellent water flow, and a better cutoff effect.</li></ul><h4>PP (Polypropylene)</h4><ul><li>Ideal for filtering all water-based samples and most solvents.</li><li>Used for general filtration of biological samples, solvents, deionized water, and reducing biological load.</li><li>It has good thermal compatibility.</li></ul><h5>Examples of Use:</h5><ol><li>Sterilization of solutions: Filtration can remove bacteria and other microorganisms from solutions.</li><li>Sample purification: Samples are filtered before analysis to remove solid particles that could contaminate analytical instruments or affect analysis results.</li><li>Preparation for chromatography: Filtration before entering devices like HPLC (High-Performance Liquid Chromatography) to ensure sample purity.</li></ol>You can also visit the full range of syringe filters on the <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/?s=syringe+filters&amp;post_type=product&amp;dgwt_wcas=1?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex website</a>.

Watrex Deltasil 100 C18 Preparative HPLC columns

Need a high quality column at an affordable price? Deltasil™ columns are filled with standard reversed phase for a wide range of applications.

<a target="_blank" rel="noopener noreferrer" href="https://watrex.com/?s=watrex+deltasil+100+C18&amp;post_type=product&amp;dgwt_wcas=1?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex DeltaSil™ 100 C18</a> column is a standard reversed phase for wide field of applications in analysis of drugs, organic compounds, peptides and others.Stationary phase is based on synthetic 5 μm silica-gel with 100 Å pores and 15% carbon content. The column has a good peak symmetry and efficiency.Theoretical plate count value for non-polar compounds, such as naphthalene, reaches up to 90.000 theoretical plates per meter.A wide range of column sizes is available, with additional dimensions available on request.We are committed to the sustainability of our columns and therefore also offer backfill.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Watrex_Deltasil_HPLC_column_Mobile_phase_85_ACN_Flowrate_0_65_mlmin_Pressure_54_bar_Detection_254_nm_Injection_2_ml_de7068538f.jpg" alt="Watrex: Watrex Deltasil HPLC column (Mobile phase 85% ACN; Flowrate 0.65 mlmin; Pressure 54 bar; Detection 254 nm; Injection 2 μl)"><h3>Ordering information:</h3><h5>PN/Component:</h5><ul><li>WI02241 Watrex Deltasil™ 100 C18, 10 μm, 250x20 mm column</li><li>WI02242 Watrex Deltasil™ 100 C18, 10 μm, 300x20 mm column</li><li>WI02243 Watrex Deltasil™ 100 C18, 5 μm, 250x20 mm column &nbsp;(Price 1 294 € ex VAT)</li><li>WI02244 Watrex Deltasil™ 100 C18, 5 μm, 300x20 mm column</li><li>WI02245 Watrex Deltasil™ 100 C18, 5 μm, 250x30 mm column</li><li>WI02246 Watrex Deltasil™ 100 C18, 10 μm, 250x30 mm column</li><li>WI02247 Watrex Deltasil™ 300 C18, 5 μm, 250x20 mm column</li><li>WI02248 Watrex Deltasil™ 300 C18, 10 μm, 250x20 mm column</li><li>WI02249 Watrex Deltasil™ 300 C18, 10 μm, 250x30 mm column</li><li>WI02153 Guard column insert 10x4.0 mm, Deltasil C18, 5 um, 10 pcs</li></ul>

Watrex BioWorks WorkBeads resins and GoBio Mini columns

Watrex Praha is the official distributor of Bio-Works, a leading global manufacturer of chromatographic resins designed for the purification of biopharmaceuticals.

<a target="_blank" rel="noopener noreferrer" href="https://watrex.com/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex Praha</a> is the official distributor of Bio-Works, a leading global manufacturer of chromatographic resins designed for the purification of biopharmaceuticals. This partnership brings high-quality products to the Czech market, widely used in biotechnology and the pharmaceutical industry.The main product of Bio-Works is <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">WorkBeads </a>resins, manufactured using a patented agarosebased method. These resins are characterized by excellent mechanical stability, uniform bead size distribution, and high separation efficiency. They are available both as loose resins and in prepacked columns, making them easy to use in various applications.For efficient small-scale purification and process development screening, <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">GoBio Mini</a> columns are the ideal solution. These prepacked columns are available in 1 ml and 5 ml sizes, facilitating quick and effective biomolecule separations.Bio-Works products are used in bioprocess solutions focused on the purification and analysis of biomolecules, including monoclonal antibodies, proteins, peptides, oligonucleotides, viruses, and vaccines. These technologies offer top-tier quality and precision, ensuring optimal capacity and product purity.<h3>Types of sorbents:</h3><h4><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/affinity-chromatography/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Affinity chromatography resins</a></h4><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/affinity-chromatography/affinity-sorbents/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">WorkBeads™ affimAb</a> is an optimized alkali-stable protein A resin designed for purification of monoclonal- and polyclonal antibodies in laboratory to process scale. This resin has a superior base matrix combined with a patented, alkali-stable protein A ligand, which results in high dynamic binding capacity at short residence times. This resin binds over 40 mg IgG/mL resin also at as short residence time as 2.5 min. Available also in prepacked 1 mL and 5 mL <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/affinity-chromatography/affinity-columns/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">GoBio™ Mini </a>columns.<h4><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/ion-exchange-chromatography/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Ion exchange chromatography (IEX) resins</a></h4><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/ion-exchange-chromatography/iex-sorbents/">WorkBeads™ resins for ion exchange chromatography</a> are designed for research and industrial scale purification of proteins, peptides and oligonucleotides by utilizing the difference in their surface charge. These resins demonstrate high-resolution separation while giving low backpressure to facilitate both capture and polishing purification applications in standard bioprocess columns.<ul><li>WorkBeads 100S is a strong cation exchanger and will bind positively charged substances.</li><li>WorkBeads 100Q is a strong anion exchanger and will bind negatively charged substances.</li><li>WorkBeads 40S is a strong cation exchanger with sulfonate ligands and will bind positively charged substances.&nbsp;</li><li>WorkBeads 40Q is a strong anion exchanger with quaternary amine and will bind negatively charged substances.&nbsp;</li><li>WorkBeads 40 DEAE is a weak anion exchanger with tertiary amine ligands (diethylaminoethyl) and is an alternative to WorkBeads 40Q when looking for alternative selectivities.</li></ul>Also available in pre-filled <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/ion-exchange-chromatography/iex-columns/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">GoBio™ Mini.</a><h4><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/gel-filtration-sec/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Size exclusion chromatography (SEC) resins</a></h4><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/gel-filtration-sec/sec-sorbents/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">WorkBeads™ 40/100 SEC, WorkBeads 40/1000 SEC, WorkBeads 40/10 000 SEC, and</a> <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/gel-filtration-sec/sec-sorbents/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">WorkBeads Macro SEC resins</a> are used for preparative size exclusion chromatography (SEC) in laboratory and process scale purification of proteins, viruses, and other biomolecules by utilizing the differences in their size. These resins are based on agarose, which is a biopolymer suitable for separation of biomolecules. WorkBeads resins are cross-linked using a proprietary method that results in a very rigid structure. Although the general recommendation for SEC is to use a low flow rate for best purification, the rigidity and tight particle size distribution allow for the purification of viruses and other large substances at a high flow rate for fast processing and high yields.Produced using a proprietary cross-linking method that results in highly porous and physically stable matrices.We have recently added two new Size Exclusion Chromatography (SEC) products that expand the range for more choice and flexibility in separating large particles. WorkBeads 200 SEC, with 180 μm beads, is suitable for viscous samples like serum and whole blood. WorkBeads Macro SEC resins extend the range of several resins with a bead size of 45 μm but different porosities, making it easy to change between them when different fractionation ranges are desired.<a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/gel-filtration-sec/sec-sorbents/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">WorkBeads Dsalt resin</a> is designed to enable quick and easy separations of high- and lowmolecular-weight substances. This resin is pre-swollen and enables efficient desalting and buffer exchange of proteins, large peptides, and nucleic acids.Also available in pre-filled <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/gel-filtration-sec/sec-columns/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">GoBio™ Mini</a>.<h4><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/hic-chromatography/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Hydrophobic interaction chromatography (HIC) resins</a></h4><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/hic-chromatography/hic-sorbents/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">WorkBeads™ 40 Butyl SH</a> is a resin for hydrophobic interaction chromatography (HIC) designed for research and industrial scale purification of proteins, peptides, plasmids, and oligonucleotides by utilizing the difference in their surface hydrophobicity. It’s often used to complement other techniques that separate according to either charge or size.The functional ligand of WorkBeads 40 Butyl SH is n-butyl thioether. Since butyl is a very hydrophobic linear chain, minimal mixed-mode interactions are expected. The resin is optimized to offer reliable binding performance. The property of high-resolution separation, in combination with low backpressure, allows both capture and polishing purification applications in standard bioprocess columns. The resin is also available in several different ready-to-use prepacked column sizes, such as <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/hic-chromatography/hic-columns/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">GoBio™ Mini</a> 1 mL and 5 mL, GoBio Screen 7 x 100 (3.8 mL), GoBio Prep 16 x 100 (20 mL) and 26 x 100 (53 mL) as well as GoBio Prod columns starting at 1 L. 5.&nbsp;<h4><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/imac-chromatography/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Immobilized metal-ion affinity chromatography (IMAC) resins&nbsp;</a></h4>There are three different chelating ligands that <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/imac-chromatography/imac-sorbents/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">WorkBeads IMAC resins</a> are based on. First are WorkBeads IDA (iminodiacetic acid) and WorkBeads NTA (nitrilotriacetic acid), which can be charged or are pre-charged with four different metals (Ni2+, Co2+, Cu2+, and Zn2+). Different combinations of ligands and metals give unique selectivities. Pre-charged IDA and NTA-based IMAC resins can be stripped, cleaned, and recharged with fresh metal ions.&nbsp;The third resin is WorkBeads NiMAC, a nickel pre-charged resin with very low nickel leakage and tolerant against chelating agents (EDTA) and reducing substances (DTT). This resin is optimal for the purification of, e.g. eukarytic cell feeds, which often containing these substances.For optimization, an initial screening is recommended with the different WorkBeads IMAC resins to identify the optimal combination of ligand and metal ion.Also available in pre-filled <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/imac-chromatography/imac-columns/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">GoBio™ Mini.</a><h4><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/activated-resins/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Activated resins</a></h4>Pre-activated resin enables successful, convenient immobilization of ligands without the need for complex syntheses or special equipment. We have developed two different pre-activated resins where the bromohydrin active group reacts with thiol, amino and hydroxyl groups of the substance to be coupled. Two different resin porosities are available to facilitate optimized coupling of ligands of different sizes, or to optimize the prepared affinity resin for target molecules of different sizes.Resin for coupling your own ligands:<ul><li>Made from agarose, well established and well-known in the Biotechnology industry</li><li>Simple coupling procedures at ambient temperature</li><li>Stable at ambient temperature in aqueous solution and at neutral pH</li><li>Suitable for coupling of ligands containing sulphydryl, amino- or hydroxy group</li></ul>Available as <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/activated-resins/activated-sorbents/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">WorkBeadsTM sorbents</a> or in pre-filled <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/activated-resins/activated-columns/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">GoBio™ Mini</a>.For more information or a non-binding quote regarding BioWorks products, please contact us at watrex@watrex.com or visit our website <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">www.watrex.com</a>

Watrex Deltasil 100 C18 HPLC columns

<a target="_blank" rel="noopener noreferrer" href="https://watrex.com/?s=watrex+deltasil+100+C18&amp;post_type=product&amp;dgwt_wcas=1?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex DeltaSil™ 100 C18</a> column is a standard reversed phase for wide field of applications in analysis of drugs, organic compounds, peptides and others.Stationary phase is based on synthetic 5 μm silica-gel with 100 Å pores and 15% carbon content. The column has a good peak symmetry and efficiency.Theoretical plate count value for non-polar compounds, such as naphthalene, reaches up to 90.000 theoretical plates per meter.A wide range of column sizes is available, with additional dimensions available on request.We are committed to the sustainability of our columns and therefore also offer backfill.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Watrex_Deltasil_HPLC_column_Mobile_phase_85_ACN_Flowrate_0_65_mlmin_Pressure_54_bar_Detection_254_nm_Injection_2_ml_de7068538f.jpg" alt="Watrex: Watrex Deltasil HPLC column (Mobile phase 85% ACN; Flowrate 0.65 mlmin; Pressure 54 bar; Detection 254 nm; Injection 2 μl)"><h3>Ordering information:</h3><h5>PN/Component:</h5><ul><li>WI02DC181254 Watrex Deltasil™ 100 C18, 5 μm, 125x4 mm column (Price 234 € ex VAT)</li><li>WI02DC181504 Watrex Deltasil™ 100 C18, 5 μm, 150x4 mm column (Price 234 € ex VAT)</li><li>WI02DC1815046 Watrex Deltasil™ 100 C18, 5 μm, 150x4,6 mm column</li><li>WI02DC182504 Watrex Deltasil™ 100 C18, 5 μm, 250x4 mm column (Price 296 € ex VAT)</li><li>WI02DC1825046 Watrex Deltasil™ 100 C18, 5 μm, 250x4,6 mm column</li><li>WI02DC182508 Watrex Deltasil™ 100 C18, 5 μm, Semi-prep 250x8 mm column (Price 482 € ex VAT)</li></ul>

Watrex Polymer IEX HPLC columns

Do you need HPLC columns for the determination of organic acids, alcohols and sugars? Columns filled with a monodisperse sorbent based on sulfonated styrenedivinylbenzene.

<a target="_blank" rel="noopener noreferrer" href="https://watrex.com/?s=watrex+polymer+iex&amp;post_type=product&amp;dgwt_wcas=1?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex Polymer IEX™</a> is the Europe’s leading sorbent for ion exclusion analysis of alcohols, carboxylic acids, sugars, and polysacharides<ul><li>H⁺, Ca²⁺, Pb²⁺ and Na⁺ forms</li><li>Unique monodispersed sorbent based on sulfonated polystyrene</li><li>Bulk packing materials available</li></ul><h3>H form</h3>The hydrogen form is suitable for organic acids, alcohols and some sugars in natural materials. The column is particularly suitable for the analysis of fruit drinks, wine, etc. Its great advantage is the high stability of retention times and the wide concentration range of analytes.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Column_250x8mm_IEX_H_4da682fa13.jpg" alt="Watrex: Column 250x8mm IEX H"><h3>Ca form</h3>The calcium form is characterized by good selectivity for the separation of mono- and disaccharides in natural materials. The column must be protected from anions forming insoluble calcium salts (phosphates, sulphates, etc.) and cations with a higher affinity for the sorbent than calcium ions.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Column_250x8mm_IEX_Ca_b840dddcce.jpg" alt="Watrex: Column 250x8mm IEX Ca"><h3>Pb form</h3>The lead form is suitable for the separation of mono- and disaccharides in natural materials. The column must be protected from anions forming insoluble lead salts (phosphates, sulphates, etc.) and cations with a higherUse the appropriate pre-column to extend the life of the analytical column.<h3>Ordering information:</h3><h5>PN/Component:</h5><ul><li>WI020223 Watrex 300x8 mm Polymer IEX H form, 8 um</li><li>WI020213 Watrex 300x8 mm Polymer IEX Ca form, 8 um</li><li>WI020253 Watrex 300x8 mm Polymer IEX Pb form, 8 um</li><li>WI02022 Watrex 250x8 mm Polymer IEX H form, 8 um (Price 926 € ex VAT)</li><li>WI02021 Watrex 250x8 mm Polymer IEX Ca form, 8 um (Price 926 € ex VAT)</li><li>WI02025 Watrex 250x8 mm Polymer IEX Pb form, 8 um (Price 926 € ex VAT)</li><li>WI02122 Guard column insert 10x4.0 mm PEEK Polymer IEX H 8 um, 10 pcs</li><li>WI02121 Guard column insert 10x4.0 mm PEEK Polymer IEX Ca 8 um, 10 pcs</li><li>WI029012 Guard column holder (for 10x4.0 mm PEEK insert)</li></ul>

Watrex IonPlus HPLC columns

Do you perform cation or anion analysis and need the right column at an affordable price? Our Watrex IonPlus™ columns are just what you are looking for!

Watrex IonPlus™ are special columns for ion chromatography. The matrix used is styrene-divinylbenzene based and can withstand higher organic modifier content in the mobile phase.<h3><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/chromatography/hplc-columns/watrex-columns/ion-exchange/watrex-ionplus-cs19-ic-column-250x46mm/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex IonPlus™ CS19</a></h3><ul><li>Styrene-divinylbenzene, 55% cross-linking (7 μm particle i.d.)</li></ul>The Watrex IonPlus™ CS19 is an optimized column designed for the separation of common cations, small polar amines and moderately hydrophobic and polyvalent cations using simple aqueous eluents and elevated temperatures. They provide excellent separation of alkali metals, alkaline earth metals, alkylamines, alkanolamines and biogenic amines.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/HPLC_kolona_Watrex_Ion_Plus_CS_19_738c29ff57/HPLC-kolona-Watrex-IonPlus-CS19.png" alt="Watrex: Separation of anions in a Watrex IonPlus CS19 HPLC column"><h3><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/chromatography/hplc-columns/watrex-columns/ion-exchange/watrex-ionplus-as19-ic-column-250x46mm/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex IonPlus™ AS19</a></h3><ul><li>Styrene-divinylbenzene, 55% cross-linking (12 μm particle i.d.).</li></ul>Watrex IonPlus™ AS19 is a column analyzing common inorganic anions including fluorides, chlorites, bromates, chlorides, nitrates, phosphates and sulphates in drinking, underground and waste water or other matrices.<h3><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/chromatography/hplc-columns/watrex-columns/ion-exchange/watrex-150x4mm-ic-anion-i-7um/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex IC Anion I</a></h3><ul><li>Styrene-divinylbenzene (7 μm particle i.d.)</li></ul><h3>Ordering information:</h3><h5>PN/Component:</h5><ul><li>WCS19250046 Watrex IonPlus™ CS19 IC Column 250x4,6mm, 7 um (Price 1 169 € ex VAT)</li><li>WCS19150030 Watrex IonPlus™ CS19 IC Column 150x3mm, 7 um</li><li>WCS19150040 Watrex IonPlus™ CS19 IC Column 150x4mm, 7 um</li><li>WCS19250030 Watrex IonPlus™ CS19 IC Column 250x3mm, 7 um</li><li>WAS19250046 Watrex IonPlus™ AS19 IC Column 250x4,6mm, 7 um (Price 1 090 € ex VAT)</li><li>WAS19150030 Watrex IonPlus™ AS19 IC Column 150x3mm, 7 um</li><li>WAS19150040 Watrex IonPlus™ AS19 IC Column 150x4mm, 7 um</li><li>WAS19250030 Watrex IonPlus™ AS19 IC Column 250x3mm, 7 um</li><li>WAS1925046 Watrex IonPlus™ AS19 IC Column 250x4.6mm, 12 μm</li><li>WI021540 Watrex IC Anion I 150x4mm, 7 μm (Price 731 € ex VAT)</li><li>CAT12546 WATREX 125×4.6mm Universal Cat II, 7um (Price 584 € ex VAT)</li></ul>

Watrex DeltaGel GPC/SEC columns

Do you need a GPC column for SEC chromatography in organic solvents at an affordable price? Our Watrex Deltagel™ are just what you are looking for!

Watrex DeltaGel™ are special mixed-bed GPC columns for SEC chromatography in organic solvents.The columns are based on polystyrene and are intended especially for separation of synthetic polymers in organic solvents.We offer 4 variants of columns that differ in their separation range.Columns are available in various sizes for both analytical and preparative applications.<h3>Linear range:</h3><ul><li>DeltaGel Mixed-E (0 - 33 000 Da)</li><li>DeltaGel Mixed-D (1 000 - 200 000 Da)</li><li>DeltaGel Mixed-C (5 000 - 500 000 Da)</li><li>DeltaGel Mixed-B (20 000 - 7 000 000)</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Delta_Gel_GPC_SEC_kolony_7dfd459a06/Watrex-DeltaGel-GPC-SEC-kolony.jpg" alt="Watrex: DeltaGel GPC SEC columns for the separation of synthetic polymers"><h3>Ordering information:</h3><h5>PN/Component:</h5><ul><li>DGB.25020 Watrex 250x20 mm DeltaGel™ Mixed-B, 5 um</li><li>DGC.25020 Watrex 250x20 mm DeltaGel™ Mixed-C, 5 um</li><li>DGD.25020 Watrex 250x20 mm DeltaGel™ Mixed-D, 5 um</li><li>DGE.25020 Watrex 250x20 mm DeltaGel™ Mixed-E, 5 um</li><li>DGB.3008 Watrex 300x8 mm DeltaGel™ Mixed-B, 5 um (Price 1 269 € ex VAT)</li><li>DGC.3008 Watrex 300x8 mm DeltaGel™ Mixed-C, 5 um (Price 1 269 € ex VAT)</li><li>DGD.3008 Watrex 300x8 mm DeltaGel™ Mixed-D, 5 um (Price 1 269 € ex VAT)</li><li>DGE.3008 Watrex 300x8 mm DeltaGel™ Mixed-E, 5 um (Price 1 269 € ex VAT)</li><li>DGB.25020G WATREX 30x20 mm DeltaGel™ Mixed-B, 5um, Guard Column</li><li>D2K4101927 Derivatizating agents AQC 5x3 mg</li><li>DGB.0508 WATREX 50×8mm DeltaGel 5 um, Guard column (Price 390 € ex VAT)</li></ul>

Products focused on Consumables from Watrex Prague - page 1

Related content

PFAS in Water: Why We’re Missing 96% of the Problem

New technology streamlines the development of aptamers, synthetic alternatives to antibodies

Clarity Chromatography Software 10.2 released!