<h3><strong>How are PFAS regulations changing, and what role will ion chromatography play in the future of environmental testing?</strong></h3><p>In this episode, &nbsp;David interviews <strong>Jay Gandhi, PhD, </strong>Vertical Markets Manager at <strong>Metrohm USA</strong>, for an in-depth discussion on PFAS analysis, the rise of AOF (Adsorbable Organic Fluorine) testing, and the development of EPA 1621 and ISO 18127 standards.</p><p>With more than 30 years of experience in ion chromatography, Jay shares valuable perspective on how the field has evolved—from early applications and NASA water recovery projects to today’s challenges involving PFAS, TFA, and emerging contaminants.</p><h4><strong>Topics covered in this episode include:</strong></h4><ul><li>What PFAS are and why they matter</li><li>The difference between targeted PFAS methods and AOF analysis</li><li>How combustion ion chromatography works</li><li>Behind the scenes of EPA 1621 and ISO 18127 method development</li><li>Regulatory trends in water, textiles, and food packaging</li><li>TFA analysis using IC-MS and IC-MS/MS</li><li>The future of ion chromatography in environmental labs</li></ul><h3><strong>Video Transcription</strong></h3><p>For more than three decades, Jay Gandhi has worked with ion chromatography (IC), watching the technique expand from a specialized tool for water analysis into an analytical platform used across environmental testing, food and beverage analysis, semiconductor manufacturing, battery applications, and, increasingly, PFAS analysis.</p><p>In an interview for <i>Concentrating on Chromatography</i>, Gandhi discusses his introduction to IC during his work on a NASA Mars exploration project, the emergence of PFAS as a major analytical challenge, and why techniques such as adsorbable organic fluorine (AOF) determination and combustion ion chromatography (CIC) can provide information that targeted LC-MS analysis alone cannot deliver. He also examines the development of standardized methods, sample preparation challenges, and the future role of IC-MS and total fluorine approaches in PFAS monitoring.</p><h4><strong>From NASA to ion chromatography</strong></h4><p>Gandhi's introduction to ion chromatography came through his work as a principal scientist on a NASA Mars exploration project focused on water recovery under zero-gravity conditions. IC played an important role because it enabled researchers to establish the ionic balance of anions and cations in water.</p><p>The technology was used both to investigate micronutrients relevant to agricultural applications and to evaluate water purity for potential astronaut consumption. During approximately three years of this work, Gandhi gained extensive experience with ion chromatography. This ultimately led him deeper into IC instrumentation and, 24 years ago, to joining Metrohm.</p><p>At the beginning of his career, IC was strongly associated with relatively straightforward anion and cation analysis in water. The technique itself had been used for water analysis since the 1970s, but Gandhi has seen its application range expand dramatically.</p><p>Food and beverage testing and environmental analysis became important fields, supported by both direct and indirect detection strategies. More recently, IC has also found applications in areas such as the semiconductor industry and battery recycling.</p><p>In Gandhi's words, ion chromatography has effectively "bloomed" into numerous application areas.</p><h4><strong>PFAS changes the analytical challenge</strong></h4><p>PFAS represent a particularly important chapter in this development. These chemicals have been used for decades in numerous consumer and industrial products, including non-stick materials, firefighting foams, water-resistant textiles and other applications.</p><p>Gandhi recalls work on PFOA and PFOS using ion chromatography with conductivity detection as early as 2008. However, the achievable detection limits were insufficient for the extremely low concentrations that later became important in PFAS analysis.</p><p>A major turning point for him came in 2015, when he encountered research from Sweden using <strong>combustion ion chromatography to investigate total fluorine</strong>. Subsequent collaboration with researchers at Clarkson University and Harvard University, particularly on aqueous film-forming foam (AFFF), further demonstrated the importance of looking beyond individual targeted PFAS compounds.</p><h4><strong>Why targeted LC-MS does not tell the whole story</strong></h4><p>Targeted LC-MS is highly sensitive and selective and can provide detailed information about individual PFAS compounds. However, according to Gandhi, the number of possible PFAS structures in the environment is vastly greater than the number routinely included in targeted methods.</p><p>A targeted method may monitor dozens or perhaps around one hundred compounds, while the overall PFAS universe can include thousands of chemical structures. Consequently, targeted analysis may characterize only a small fraction of the total PFAS burden.</p><p>There are other practical considerations. LC-MS measurements can be affected by matrix-dependent ion suppression, while accurate quantification frequently relies on isotope-labelled internal standards. Such standards are available for only a limited number of compounds and can be expensive.</p><p>This is where measurements of total or adsorbable organic fluorine can provide complementary information. Rather than asking <i>which specific PFAS compounds are present?</i>, these approaches can help answer a broader question: <i>how much fluorine associated with this chemical space is present in the sample?</i></p><h4><strong>AOF as a complementary approach</strong></h4><p>Adsorbable organic fluorine analysis provides a different perspective from targeted LC-MS. In the workflow discussed by Gandhi, organic fluorine compounds are captured during sample preparation and subsequently measured using combustion ion chromatography.</p><p>The principle of CIC builds upon older total organic halogen analysis. The sample is combusted at temperatures above approximately 1,000 °C, breaking carbon-halogen bonds. In PFAS-related analysis, carbon-fluorine bonds are broken and the resulting fluoride is collected in an absorption solution.</p><p>Ion chromatography is then used to separate and quantify the fluoride.</p><p>Replacing older detection approaches with IC provides both sensitivity and selectivity for the halogens being measured. Effective combustion is critical: oxygen supports the combustion process, while a carrier gas transports the products into the absorption solution for subsequent IC analysis.</p><h4><strong>The challenge of inorganic fluoride</strong></h4><p>The broad response of CIC is simultaneously one of its strengths and one of its analytical challenges. Combustion does not distinguish fluorine originating from PFAS from fluorine present in inorganic compounds such as fluoride salts.</p><p>This becomes particularly important when analyzing water containing relatively high concentrations of inorganic fluoride while attempting to quantify organic fluorine at very low levels.</p><p>Sample preparation therefore has a critical role. Inorganic fluoride must be effectively separated from the fraction of interest, while materials used during sample preparation must themselves have sufficiently low fluoride backgrounds.</p><p>Contamination can come from unexpected sources. Gandhi points out that background fluoride may originate not only from reagents and sample preparation materials but potentially from the laboratory environment. Careful blank control, appropriate materials and rigorous evaluation of interferences are therefore essential when moving toward increasingly low detection limits.</p><h4><strong>From research method to international standardization</strong></h4><p>The development of standardized AOF methods illustrates the importance of collaboration between academia, industry, regulatory organizations and analytical laboratories.</p><p>Gandhi describes work that began in Europe around 2015 and subsequently progressed through German standardization activities, ISO development, ASTM-related collaboration and the U.S. EPA. The process eventually contributed to methods such as <strong>EPA Method 1621</strong>.</p><p>He emphasizes that this was not the work of a single scientist or organization. Developing a robust method required years of experiments, discussions and sometimes difficult technical debates among numerous stakeholders.</p><p>For Gandhi, the essential principle was that experimental evidence ultimately had to determine the outcome. Collaboration becomes possible when scientists focus on the data rather than the organizations they represent.</p><h4><strong>PFAS monitoring is moving beyond drinking water</strong></h4><p>Regulatory attention to PFAS is also expanding beyond drinking water. Gandhi describes a broader strategy that begins with reducing the manufacture and use of PFAS-containing materials and continues with removing existing contamination from the environment.</p><p>Wastewater represents an important part of this picture because PFAS can enter it from numerous sources. Historical contamination from landfills and contaminated sites can also migrate into groundwater and ultimately affect drinking-water supplies.</p><p>Consumer products are another area of increasing attention. Food packaging, disposable containers, automotive fabrics, outdoor clothing and water-repellent textiles have historically used fluorinated substances to provide properties such as grease, water or stain resistance.</p><p>Reducing PFAS use in such products could therefore gradually decrease the amount entering waste streams and the wider environment.</p><h4><strong>Screening first, regulation later?</strong></h4><p>Gandhi expects AOF to be particularly valuable as a <strong>screening tool</strong>, providing an estimate of broader fluorine contamination before laboratories proceed to more specific analyses.</p><p>Its importance becomes clear when AOF results are compared with targeted PFAS measurements. Gandhi reports that laboratories working with EPA Method 1621 have observed differences between targeted PFAS results and broader AOF measurements ranging from approximately <strong>300- to 4,000-fold in the total fluorine mass balance</strong>.</p><p>Such discrepancies suggest that targeted methods can leave a substantial portion of fluorine unexplained.</p><p>Rather than competing with LC-MS, AOF and CIC therefore provide complementary information. A broad screening method can reveal the magnitude of total contamination, while targeted mass spectrometry identifies and quantifies specific compounds of interest.</p><h4><strong>Where IC-MS fits into the PFAS toolbox</strong></h4><p>No single technique can cover the entire PFAS problem. Gandhi highlights very short-chain, highly polar fluorinated compounds as another analytical challenge.</p><p>Compounds such as trifluoroacetic acid (TFA) are highly water-soluble and may not be quantitatively retained by the carbon materials used for AOF sample preparation. Direct ion chromatography can provide an alternative route for separating such compounds from common inorganic anions.</p><p>Coupling IC with mass spectrometry adds another level of sensitivity and selectivity. Gandhi therefore sees <strong>IC-MS and IC-MS/MS</strong> as increasingly important tools for highly polar fluorinated compounds. Similar approaches can also be useful beyond PFAS, including the determination of polar pesticides such as glyphosate and glufosinate.</p><h4><strong>Toward lower detection limits and more complete PFAS analysis</strong></h4><p>For Gandhi, current standardized methods represent a beginning rather than an endpoint. Improvements in instrumentation and particularly sample preparation could push total fluorine analysis to substantially lower concentrations.</p><p>He notes that current combustion IC configurations can reach approximately <strong>0.5 ppb</strong>, or 500 parts per trillion, and believes that improvements in sample volume, preparation procedures and mitigation of inorganic fluoride backgrounds could eventually move detection below 100 ppt and potentially toward 50 ppt.</p><p>Extractable organic fluorine workflows could provide another bridge between broad fluorine screening and targeted LC-MS methods. Combining improved extraction with CIC could allow samples to be screened for organic fluorine before more detailed compound-specific characterization.</p><p>The broader message from Gandhi's career is that PFAS analysis is unlikely to be solved by a single analytical technique. <strong>Targeted LC-MS provides compound-specific sensitivity and selectivity; AOF and combustion IC reveal a broader fluorine picture; and IC-MS can address highly polar compounds that are difficult to capture using conventional workflows.</strong> Used together, these techniques can provide laboratories with a much more complete understanding of PFAS contamination than any one approach alone.</p><blockquote><p><strong>This text has been automatically transcribed from a video presentation using AI technology. It may contain inaccuracies and is not guaranteed to be 100% correct.</strong></p></blockquote><blockquote><h4><strong>Concentrating on Chromatography Podcast</strong></h4><p>Dive into the frontiers of chromatography, mass spectrometry, and sample preparation with host David Oliva. Each episode features candid conversations with leading researchers, industry innovators, and passionate scientists who are shaping the future of analytical chemistry. From decoding PFAS detection challenges to exploring the latest in AI-assisted liquid chromatography, this show uncovers practical workflows, sustainability breakthroughs, and the real-world impact of separation science. Whether you’re a chromatographer, lab professional, or researcher you'll discover inspiring content!</p><p>You can find <strong>Concentrating on Chromatography Podcast </strong>in podcast apps:</p><ul><li><a target="_blank" rel="noopener noreferrer" href="https://open.spotify.com/show/1wZg67rCjoGju4yhqxI3tL"><strong>Spotify</strong></a></li><li><a target="_blank" rel="noopener noreferrer" href="https://podcasts.apple.com/tz/podcast/concentrating-on-chromatography/id1788429185"><strong>Apple podcast</strong></a></li><li><a target="_blank" rel="noopener noreferrer" href="https://podscan.fm/podcasts/concentrating-on-chromatography"><strong>podscan</strong></a></li></ul><p>and on <a target="_blank" rel="noopener noreferrer" href="https://www.youtube.com/@ChromatographyTalk/videos"><strong>YouTube channel</strong></a></p></blockquote>

The Future of Ion Chromatography | PFAS Testing, EPA 1621 & AOF Explained

<p><strong>In late February 2025, a train carrying benzene derailed in Hustopeče nad Bečvou, and within hours, a race was on to save the groundwater and surface water. One of the most toxic industrial substances began seeping into the gravel-sand subsoil. While fieldwork was underway to prevent the spread of contamination, decisions were already being made in the CXI TUL laboratories regarding how to subsequently clean up the contaminated rock environment.</strong></p><p>The accident ranks among the <strong>most serious environmental incidents in the Czech Republic in recent years</strong>. After a tanker train derailed, hundreds of<strong> metric tons of benzene leaked</strong>; due to the highly permeable geological subsoil, it quickly seeped into deeper soil layers and into the groundwater. The combination of the substance’s high toxicity and local conditions complicated both the emergency response and the subsequent remediation. The key was to stop further spread, determine the extent of the contamination, and establish a remediation strategy for the entire site.</p><p>It was at this stage that CXI TUL became involved in the solution. At the request of the renowned remediation company DEKONTA, a.s., a team led by <strong>RNDr. Jan Němeček, Ph.D.</strong>, began testing the feasibility of the<strong> in situ chemical oxidation (ISCO) method</strong>. This technology is designed to<strong> break down benzene directly within the rock matrix</strong>, without the need for extensive excavation of contaminated soil or the pumping out of large volumes of groundwater. The goal was simple: to find a method that would work quickly, safely, and under the actual conditions of the affected site.</p><h4><strong>Benzene Remediation: Technically Simple, Complicated in Practice</strong></h4><p>Benzene is a highly toxic and carcinogenic substance that rapidly penetrates into groundwater in permeable subsoil, where it dissolves and spreads further as the water flows toward surface water bodies. Benzene also binds to rock particles and migrates in the form of vapors into overlying unconsolidated layers.</p><p>Scientists in Liberec therefore tested <i>in situ </i>chemical oxidation (ISCO) technology under laboratory conditions. The goal was to find an oxidant capable of breaking down benzene directly underground into less hazardous substances.</p><p>The tests evaluated two main options:<strong> activated hydrogen peroxide and sodium peroxodisulfate</strong>. Both substances removed up to<strong> 99.99% of the benzene</strong>, but there was a difference in their kinetics and impacts on the natural environment. Activated hydrogen peroxide achieved nearly complete degradation of the contaminant within a single day. Activated sodium peroxodisulfate was slower and also significantly altered the chemistry of the water; it acidified the environment and increased the sulfate content in the water, which poses an additional environmental burden.</p><p>For field applications, the researchers therefore unequivocally recommended <strong>activated hydrogen peroxide</strong>.</p><h4><strong>Dosage Matters</strong></h4><p>It was not just the oxidant’s effectiveness that was key. It was equally important to determine how the chemical reaction would behave in a real geological environment. The team of scientists therefore also analyzed what is known as <strong>soil oxidant consumption (SOD)</strong>. It turned out that a significant portion of the oxidizing agent does not react solely with benzene but is also consumed to a significant extent by the rock environment itself, particularly by natural organic substances present in the fine-grained fraction of the soil.</p><p>An oxidant consumption value was determined specifically for the local composition of the aquifers, which is essential for the correct dosing of chemicals in the field so that the remediation is not only effective but also economically viable and safe for surrounding ecosystems.</p><h4><strong>One Year After the Accident: Research Turns into Real-World Assistance</strong></h4><p>While the public often perceives university science as a distant world of laboratories and grant projects, it is precisely situations like this that demonstrate its practical impact. The results of the work by researchers at CXI TUL did not remain confined to academic studies but directly influenced decisions regarding the technology used to clean up one of the largest environmental accidents in recent years.</p>

Science on the Front Lines: Cleanup of a Benzene Spill

<p><strong>This study uses ultra-high-performance liquid chromatography–tandem mass spectrometry (UHPLC-MS/MS) lipidomics to characterize plasma lipid alterations associated with long-term aromatase inhibitor therapy in postmenopausal breast cancer patients. A total of 649 lipid species across 23 classes and subclasses were relatively quantified, revealing significant differences in phosphatidylcholines, sphingomyelins, ceramides, hexosylceramides, and other lipid groups.</strong></p><p>Multivariate analysis showed clear group separation, while a Naive Bayes model based on lipid-class profiles achieved an AUC of 0.79. The results indicate that aromatase inhibitor therapy is associated with systematic lipidomic changes linked to estrogen deprivation and sphingolipid metabolism, providing potential mechanistic insight into long-term metabolic effects of treatment.</p><blockquote><h4><strong>The original article</strong></h4><h4><a target="_blank" rel="noopener noreferrer" href="https://www.mdpi.com/1422-0067/27/4/1926"><strong>Aromatase Inhibitor Therapy Is Associated with Distinct Plasma Lipidomic Profiles in Postmenopausal Breast Cancer Patients&nbsp;</strong></a></h4><div><span>Aleksandra Arsic, Ales Kvasnicka</span><a target="_blank" rel="noopener noreferrer" href="https://orcid.org/0000-0001-5973-316X"><span><img></span></a><span>, David Friedecky</span><a target="_blank" rel="noopener noreferrer" href="https://orcid.org/0000-0002-3448-9073"><span><img></span></a><span>, Nebojsa Ivanovic, Maja Milosevic</span><a target="_blank" rel="noopener noreferrer" href="https://orcid.org/0000-0002-0985-0728"><span><img></span></a><span> and Vesna Vucic</span></div><p>Int. J. Mol. Sci. <strong>2026</strong>, 27(4), 1926</p><p><a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.3390/ijms27041926">https://doi.org/10.3390/ijms27041926</a></p><h6>licensed under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/"><strong>CC-BY 4.0</strong></a></h6></blockquote><p><strong>Selected sections from the article follow. Formats and hyperlinks were adapted from the original.</strong></p><div><div><p>Breast cancer (BRC) is the most common malignancy among women, with over 2.2 million new cases diagnosed globally in 2022 [<a target="_blank" rel="noopener noreferrer" href="https://www.mdpi.com/1422-0067/27/4/1926#B1-ijms-27-01926">1</a>]. A substantial proportion of breast cancers are estrogen receptor-positive (ER+) and/or progesterone receptor-positive (PR+) [<a target="_blank" rel="noopener noreferrer" href="https://www.mdpi.com/1422-0067/27/4/1926#B2-ijms-27-01926">2</a>], necessitating multimodal treatment approaches, including surgery, chemotherapy, radiotherapy, and endocrine therapy. Aromatase inhibitors (AIs) represent the gold-standard adjuvant endocrine treatment for postmenopausal women, as they improve disease control and reduce the risk of distant metastasis by inhibiting peripheral aromatase activity [<a target="_blank" rel="noopener noreferrer" href="https://www.mdpi.com/1422-0067/27/4/1926#B3-ijms-27-01926">3</a>]. This inhibition prevents the conversion of androgenic precursors into estrogens in peripheral tissues, resulting in a marked reduction in systemic estrogen levels. For postmenopausal women with ER+ and PR+ breast tumors, a five-year course of AI therapy, often extended beyond this duration, is recommended to reduce the risk of disease recurrence [<a target="_blank" rel="noopener noreferrer" href="https://www.mdpi.com/1422-0067/27/4/1926#B4-ijms-27-01926">4</a>].</p><p>AIs decrease plasma and tissue concentrations of endogenous estrogens by inhibiting aromatase (cytochrome P450), the rate-limiting enzyme responsible for estrogen biosynthesis from testosterone and adrenal androgens [<a target="_blank" rel="noopener noreferrer" href="https://www.mdpi.com/1422-0067/27/4/1926#B5-ijms-27-01926">5</a>]. Because estrogen plays a protective role in lipid metabolism, AI therapy is frequently associated with dyslipidemia. Increased levels of triglycerides (TG), total cholesterol (TC), and low-density lipoprotein cholesterol (LDL) have been reported in patients receiving AIs [<a target="_blank" rel="noopener noreferrer" href="https://www.mdpi.com/1422-0067/27/4/1926#B6-ijms-27-01926">6</a>], thereby increasing the risk of cardiovascular disease (CVD) in postmenopausal women with BRC [<a target="_blank" rel="noopener noreferrer" href="https://www.mdpi.com/1422-0067/27/4/1926#B7-ijms-27-01926">7</a>].</p><p>Disturbances in lipid metabolism are recognized as a hallmark of cancer, leading to increasing interest in lipidomic profiling as a tool for characterizing tumor-associated metabolic alterations [<a target="_blank" rel="noopener noreferrer" href="https://www.mdpi.com/1422-0067/27/4/1926#B8-ijms-27-01926">8</a>]. In recent years, clinical lipidomics studies have been conducted across multiple malignancies, including lung [<a target="_blank" rel="noopener noreferrer" href="https://www.mdpi.com/1422-0067/27/4/1926#B9-ijms-27-01926">9</a>], pancreatic [<a target="_blank" rel="noopener noreferrer" href="https://www.mdpi.com/1422-0067/27/4/1926#B10-ijms-27-01926">10</a>], renal cell carcinoma [<a target="_blank" rel="noopener noreferrer" href="https://www.mdpi.com/1422-0067/27/4/1926#B11-ijms-27-01926">11</a>], colorectal [<a target="_blank" rel="noopener noreferrer" href="https://www.mdpi.com/1422-0067/27/4/1926#B12-ijms-27-01926">12</a>], and BRC [<a target="_blank" rel="noopener noreferrer" href="https://www.mdpi.com/1422-0067/27/4/1926#B13-ijms-27-01926">13</a>], highlighting cancer-specific lipidomic signatures and the growing relevance of lipid metabolism in oncology. Lipidomic reprogramming is now recognized as a defining feature of BRC. To date, elevated levels of phosphatidylcholine (PC 32:1), stearic acid, and ceramide (Cer 43:1), along with reduced levels of diacylglycerol (DG 34:2), have been reported in BRC patients compared with healthy women [<a target="_blank" rel="noopener noreferrer" href="https://www.mdpi.com/1422-0067/27/4/1926#B14-ijms-27-01926">14</a>]. These lipid species, together with phosphatidylinositol (PI 16:0/16:1) and PI (18:0/20:4), have been proposed as potential biomarkers for BRC [<a target="_blank" rel="noopener noreferrer" href="https://www.mdpi.com/1422-0067/27/4/1926#B14-ijms-27-01926">14</a>].</p><p>Despite these advances, there remains a paucity of studies investigating the lipidomic profiles in BRC patients in relation to endocrine therapy. The present cross-sectional study aims to address this gap by conducting mass spectrometry-based profiling of lipid classes and comparing profiles between postmenopausal BRC patients receiving AI therapy and another cohort assessed before this treatment. This approach aims to characterize associations between AI therapy status and plasma lipidomic patterns.</p><h4><strong>2. Results</strong></h4><h5><strong>2.3. Lipidomic Analysis</strong></h5><p>Plasma lipid profiling identified 649 lipids across 23 lipid classes and subclasses, covering the major structural families of the circulating lipidome, including neutral lipids (triacylglycerols, diacylglycerols, cholesteryl esters, and cholesterol), glycerophospholipids (phosphatidylcholines, phosphatidylethanolamines, phosphatidylinositols, phosphatidylglycerols, phosphatidylserines, and their lysophospholipid counterparts), sphingolipids (sphingomyelins, ceramides, monohexosylceramides, and dihexosylceramides), and free fatty acids. In addition to diacyl phospholipids, the dataset included ether-linked and plasmalogen species (denoted as O- and P-), most prominently within PC, PE, and LPC and LPE classes. An overview of the plasma lipidome is shown as a global lipid network (<a target="_blank" rel="noopener noreferrer" href="https://www.mdpi.com/1422-0067/27/4/1926#fig_body_display_ijms-27-01926-f001">Figure 1</a>). To assess whether the observed lipid changes reflect coordinated remodeling rather than isolated signals, we performed Fisher’s combined probability test at the lipid-class level. This analysis revealed significant cumulative differences in several lipid classes, including Cer, LPC, ether/plasmalogen LPC, LPE, and SM (<a target="_blank" rel="noopener noreferrer" href="https://www.mdpi.com/1422-0067/27/4/1926#fig_body_display_ijms-27-01926-f001">Figure 1</a>), supporting systematic class-level alterations despite limited power at the single-species level.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Int_J_Mol_Sci_2026_27_4_1926_Figure_1_Global_lipid_network_analysis_of_plasma_lipidomic_differences_between_breast_cancer_patients_BRC_prior_to_initiation_of_the_aromatase_inhibitor_6f82827773.jpg" alt="Int. J. Mol. Sci. 2026, 27(4), 1926: Figure 1. Global lipid network analysis of plasma lipidomic differences between breast cancer patients (BRC) prior to initiation of the aromatase inhibitor (AI) therapy and patients receiving AI. Cytoscape-based network visualization illustrates lipid species grouped according to structural similarity and lipid class. Each node represents an individual lipid species, while edges indicate class-based relationships. Node size corresponds to the −log10 p-value from the Mann–Whitney U test, reflecting the statistical significance (−log p-Value &gt; 1.3) of differences between groups. Node color indicates the direction and magnitude of change, based on log2 fold change, with red representing higher abundance in AI-treated patients and blue representing higher abundance in patients before AI therapy. Major lipid classes, including glycerophospholipids (GPL), sphingolipids (SP), glycerolipids (GL), fatty acids (FA), and cholesteryl esters (CE), are shown to highlight coordinated class- and species-level lipidomic alterations. Fisher’s combined p-value for individual lipid classes is shown at the bottom (significant p-Value &lt; 0.05). " srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Int_J_Mol_Sci_2026_27_4_1926_Figure_1_Global_lipid_network_analysis_of_plasma_lipidomic_differences_between_breast_cancer_patients_BRC_prior_to_initiation_of_the_aromatase_inhibitor_6f82827773.jpg 245w," sizes="100vw" width="1600" height="847"></p><h5><strong>2.4. Multivariate Analysis of Plasma Lipidomic Profiles</strong></h5><p>Principal component analysis (PCA) and partial least squares discriminant analysis (OPLS-DA) were applied to the lipidomic dataset to assess global variation and group separation between the BRC and AI groups (<a target="_blank" rel="noopener noreferrer" href="https://www.mdpi.com/1422-0067/27/4/1926#fig_body_display_ijms-27-01926-f002">Figure 2</a>). PCA was performed as an unsupervised analysis, including all samples and quality control (QC) samples. The first two principal components explained 37.9% (PC1) and 15.6% (PC2) of the total variance, accounting for 53.5% of the cumulative variance. QC samples clustered tightly near the center of the PCA score plot, indicating analytical stability and reproducibility of the LC–MS measurements. In the PCA score plot, samples from the BRC and AI groups showed partial overlap, with no complete separation observed along the first two principal components. To further evaluate group discrimination, a supervised OPLS-DA model was constructed using the same dataset. The OPLS-DA score plot demonstrated improved separation between the BRC and AI groups along the first latent variable, with group-specific clustering highlighted by confidence ellipses. Permutation testing confirmed that the supervised OPLS-DA model was not overfitted, with a negative Q<sup>2</sup> intercept (Q<sup>2</sup> = −0.55), indicating that permuted models lacked predictive ability compared with the original model (<a target="_blank" rel="noopener noreferrer" href="https://www.mdpi.com/1422-0067/27/4/1926#app1-ijms-27-01926">Supplementary Figure S1</a>). Together, these multivariate analyses indicate differences in lipidomic profiles between the BRC and AI groups, while also demonstrating acceptable analytical performance as evidenced by the clustering of QC samples.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Int_J_Mol_Sci_2026_27_4_1926_Figure_2_Multivariate_analysis_of_plasma_lipidomic_profiles_in_breast_cancer_patients_BRC_56f65f265b.jpg" alt="Int. J. Mol. Sci. 2026, 27(4), 1926: Figure 2. Multivariate analysis of plasma lipidomic profiles in breast cancer patients (BRC) prior to initiation of the aromatase inhibitor (AI) therapy and patients receiving AI. Principal component analysis (PCA) score plot (a) shows the distribution of plasma lipidomic profiles from patients before AI therapy (BRC, blue), patients receiving AI therapy (AI, red), and quality control samples (QC, gray). Orthogonal partial least squares–discriminant analysis (OPLS-DA) score plot (b) demonstrates improved separation between BRC and AI groups. The ellipse represents the 95% Hotelling’s T2 confidence interval. " srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Int_J_Mol_Sci_2026_27_4_1926_Figure_2_Multivariate_analysis_of_plasma_lipidomic_profiles_in_breast_cancer_patients_BRC_56f65f265b.jpg 245w," sizes="100vw" width="1600" height="652"></p><h4><strong>4. Materials and Methods</strong></h4><h5><strong>4.5. Lipidomic Analysis</strong></h5><p>Chromatographic separation was performed using an ultra-high-performance liquid chromatography (UHPLC) <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=55&amp;search=ExionLC"><strong>ExionLC system</strong></a> (SCIEX, Framingham, MA, USA) coupled to a <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=55&amp;search=6500"><strong>QTRAP<sup>®</sup> 6500+ mass spectrometer </strong></a>(SCIEX, Framingham, MA, USA). Lipids were separated on an <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1953"><strong>ACQUITY Premier BEH C8 column</strong></a> (100 × 2.1 mm, 1.7 μm; Waters Corporation, Wilmslow, UK). The column temperature was kept at 55 °C, and the autosampler was set to 10 °C. The mobile phases consisted of solvent A (acetonitrile/water, 6:4, <span>v</span>/<span>v</span>, containing 10 mM ammonium acetate) and solvent B (isopropanol/acetonitrile, 9:1, <span>v</span>/<span>v</span>, containing 10 mM ammonium acetate), delivered at a flow rate of 0.4 mL/min. The total analytical run time was 20 min per sample. Data acquisition was carried out using Analyst software (version 1.6.2), and data processing and semiautomatic peak integration were performed with MultiQuant software (version 3.0; SCIEX, Framingham, MA, USA). Samples were analyzed in a randomized sequence with continuous monitoring of quality control samples. Raw peak areas were QC-normalized by LOESS [<a target="_blank" rel="noopener noreferrer" href="https://www.mdpi.com/1422-0067/27/4/1926#B48-ijms-27-01926">48</a>] and IS-normalized by the corresponding IS class for each lipid.</p><h5><strong>4.6. Statistical Analysis</strong></h5><p>The data were processed using the Metabol package [<a target="_blank" rel="noopener noreferrer" href="https://www.mdpi.com/1422-0067/27/4/1926#B48-ijms-27-01926">48</a>] in R program (v 3.6.3). Preprocessing of the data included locally estimated scatterplot smoothing (LOESS), Pareto scaling, filtering of analytes (coefficients of variation in the QC above 30%), mean centering, and the lnPQN normalization (<a target="_blank" rel="noopener noreferrer" href="https://www.mdpi.com/1422-0067/27/4/1926#app1-ijms-27-01926">Supplementary Table S1</a>) [<a target="_blank" rel="noopener noreferrer" href="https://www.mdpi.com/1422-0067/27/4/1926#B49-ijms-27-01926">49</a>]. Univariate statistical analysis (based on the non-parametric non-paired Mann–Whitney U test (<span>p</span>-values shown as −log) together with the log2 fold-change in medians) was performed and visualized using GraphPad Prism (version 9.0, GraphPad Software, LLC, Boston, MA, USA). Data were also evaluated using multivariate statistical analysis, namely the principal component analysis (PCA) and orthogonal discriminant analysis by partial least squares (OPLS-DA) and validated by permutation using SIMCA software (version 18.0, Sartorius Umetrics, Umeå, Sweden). Benjamini–Hochberg correction was used for false discovery rate correction. Detected lipid species were mapped to standardized lipid classes and subclasses according to accepted lipidomics nomenclature, enabling consistent grouping of lipid species for downstream statistical, class-level, and network analyses. LipidOne 2.4 was further used to support lipid-centric data integration and visualization prior to multivariate and pathway-based analyses (such as heatmaps, ROC analyses using a Naive-Bayesian model and Logistic Regression model, and protein–protein interaction network based on lipidomics data) [<a target="_blank" rel="noopener noreferrer" href="https://www.mdpi.com/1422-0067/27/4/1926#B50-ijms-27-01926">50</a>]. Lipid network visualization was performed using Cytoscape software (v 3.8.2) [<a target="_blank" rel="noopener noreferrer" href="https://www.mdpi.com/1422-0067/27/4/1926#B51-ijms-27-01926">51</a>]. Differentially abundant lipid species were organized according to lipid class and structural similarity. Node size reflected the −log10 <span>p</span>-value from univariate analysis, while node color represented log2 fold change between groups. Calculation of Fisher’s combined probability test for assessing systematic lipid class-level differences was performed (<a target="_blank" rel="noopener noreferrer" href="https://www.mdpi.com/1422-0067/27/4/1926#app1-ijms-27-01926">Supplementary Table S2</a>) and calculated following procedures described previously [<a target="_blank" rel="noopener noreferrer" href="https://www.mdpi.com/1422-0067/27/4/1926#B52-ijms-27-01926">52</a>].</p><h4><strong>5. Conclusions</strong></h4><p>In conclusion, our findings demonstrate significant alterations in lipid metabolism in BRC patients undergoing AI therapy, with pronounced changes in Cer, SM, DG, TG, PC, PI, and PE lipids and lipid classes. However, the precise mechanisms underlying the differences in lipid metabolism between patients before and during AI treatment remain to be fully elucidated. Future longitudinal studies with paired pre- and post-treatment samples from the same individuals leveraging comprehensive lipidomic profiling are needed to deepen our understanding of AI-induced metabolic alterations and to inform the development of targeted interventions aimed at mitigating adverse effects, ultimately improving long-term outcomes and quality of life for these patients.</p></div></div>

Aromatase Inhibitor Therapy Is Associated with Distinct Plasma Lipidomic Profiles in Postmenopausal Breast Cancer Patients

Article

Video

Scientists

Environment

Health

Scientific article

Interview

Science and research

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

The Institute for Nanomaterials, Advanced Technologies and Innovations of the Technical University of Liberec, also known as CXI TUL, was founded in 2009. Our mission is to support TUL's long-term vision of collaboration with industry and innovation.

CXI TUL

Organomation, founded in 1959, designs and manufactures high-quality nitrogen evaporators and extraction systems. Known for innovation and durability, their lab instruments are used globally for efficient sample preparation with strong customer support.

Organomation

Waters/Wyatt DAWN™ Multi Angle Light Scattering (MALS) Detector

The world's most advanced light scattering instrument for absolute characterization of proteins, conjugates, macromolecules, and nanoparticles.

<h5><strong>Premier MALS</strong></h5><p>The DAWN instrument is the premier Multi-Angle static Light Scattering (MALS) detector for absolute characterization of the molar mass and size of macromolecules and nanoparticles in solution. It offers the highest sensitivity, the widest range of molecular weight, size, and concentration, and the largest selection of configurations and optional modules for enhanced capabilities.</p><h5><strong>Separation First</strong></h5><p>MALS is most often used in conjunction with a separation system such as Gel Permeation Chromatography (GPC-MALS), Size Exclusion Chromatography (SEC-MALS), or Field-Flow Fractionation (FFF-MALS) to determine distributions of mass, size, and composition, independent of column calibration by reference standards.</p><h5><strong>Supported by ASTRA ™ &nbsp;Software</strong></h5><p>ASTRA Software and its built-in analysis modules support the DAWN MALS instrument, providing the most versatile analysis available for online multi-angle and dynamic light scattering measurements.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_DAWN_MALS_HPLC_detektor_konfigurace_d5b83e46b2.jpg" alt="Waters DAWN™ Multi Angle Light Scattering (MALS) Instrument: ASTRA Software" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_DAWN_MALS_HPLC_detektor_konfigurace_d5b83e46b2.jpg 245w," sizes="100vw" width="1500" height="807"></p><h4><strong>Product description</strong></h4><p>The DAWN and its companion <strong>Optilab ™ &nbsp;dRI detector</strong> are the established benchmarks for MALS analysis, cited in thousands of peer-reviewed publications. Multi-angle light scattering detection is indispensable for use with <strong>GPC</strong> and <strong>HPLC-SEC </strong>in order to obtain reliable molecular mass distributions and information on molecular conformation, branching ratio, fragments and aggregates.</p><p><strong>SEC-MALS</strong> with a <strong>DAWN</strong> and <strong>Optilab</strong> characterizes conformation and branching of synthetic and natural <strong>polymers larger than 10 nm</strong> in rms radius R g . The addition of a <strong>ViscoStar ™&nbsp;</strong> differential viscometer creates a GPC triple-detection system that can analyze molecular conformation and size below the R g &nbsp;limit of 10 nm and determine Mark-Houwink Sakurada coefficients.</p><p>The combination of a UV/Vis absorbance detector with a DAWN instrument and Optilab refractive index detector creates a UV-MALS-RI triple-detection system, for analysis of copolymers and protein conjugates (glycoproteins, PEGylated proteins, surfactant-bound membrane proteins, etc.). With the addition of a <strong>WyattQELS ™ &nbsp;DLS module</strong> for size determination, protein conformation may be analyzed.</p><ul><li><i>M<sub>w</sub></i> &nbsp;from 200 Da to 1000 MDa</li><li><strong>Sensitivity:</strong> 10 ng/mL 100 kDa polystyrene in THF, 0.4 µg/mL BSA (66.4 kDa) in PBS</li><li><i>R<sub>g</sub></i> &nbsp;from 10 to 500 nm, up to 1000 nm with shape-specific models</li><li>Ultra-stable, high-power laser</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_DAWN_MALS_HPLC_detektor_konfigurace_1_98811a1e87.jpg" alt="Waters DAWN™ Multi Angle Light Scattering (MALS) Instrument: Accessories" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_DAWN_MALS_HPLC_detektor_konfigurace_1_98811a1e87.jpg 213w," sizes="100vw" width="1000" height="733"></p><p>The DAWN may also be used in batch (off-line) mode to characterize the weight-average molar mass, z-average size and second virial coefficient of unfractionated samples.</p><p>In conjunction with a <strong>Calypso ™ &nbsp;CG-MALS system</strong>, the DAWN characterizes macromolecular interactions, label-free and immobilization-free: affinity and absolute stoichiometry of self- and hetero-association of simple or complex molecular systems. The Calypso system also automates the determination of second virial coefficients, cross virial coefficients, average molar masses and sizes.</p><h5><strong>Ultrasonic Cleaning Included</strong></h5><p>Each DAWN instrument includes an embedded <strong>COMET ™ &nbsp;ultrasonic transducer</strong> that cleans the flow cell automatically by agitating the fluid and loosening particles from the glass surfaces.</p><h5><strong>Temperature-Controlled Models</strong></h5><ul><li>Ambient model</li><li>Ultra-High-Temperature (UHT) model, from ambient up to +210 °C</li><li>Standard Peltier heated/cooled (H/C) model, temperature control from -15 °C to +150 °C</li></ul><h4><strong>Specifications</strong></h4><h5><strong>Measurement Capabilities</strong></h5><ul><li><strong>Molar Mass Range:</strong> From 200 Da to 1 GDa, depending on dn/dc, sample concentration, and chromatography conditions.</li><li><strong>Molecular Size (Radius of Gyration, Rg):</strong> Approximately 10 nm to 500 nm, extendable to 1000 nm with shape-specific models.</li><li><strong>Hydrodynamic Radius (Rh):</strong><ul><li><strong>Flow mode:</strong> 0.5 nm to 300 nm (depending on configuration and flow rate).</li><li><strong>Batch mode:</strong> 0.5 nm to 1 µm (requires WyattQELS™ DLS module or DynaPro™ NanoStar™ with fiber optic connection).</li></ul></li><li><strong>Sensitivity:</strong> Detects as little as 10 ng of 100 kDa polystyrene in THF or 200 ng of BSA in PBS, using a standard 7.8 mm x 300 mm SEC column and no post-column filter.</li></ul><h5><strong>Fluidics and Compatibility</strong></h5><ul><li><strong>Mobile Phase:</strong> Compatible with both aqueous and organic solvents.</li><li><strong>Wetted Materials:</strong> 316 stainless steel, fused silica or F2 glass, and Kalrez.</li></ul><h5><strong>Optical System and Detectors</strong></h5><ul><li><strong>MALS Detectors:</strong> 18 photodiodes with high gain and wide dynamic range for multi-angle light scattering.</li><li><strong>Auxiliary Detectors:</strong><ul><li>Laser monitor for stabilization</li><li>Forward transmission monitor to improve data quality and correct for sample absorption</li></ul></li><li><strong>Dynamic Range:</strong> 3,300,000:1</li><li><strong>Optional DLS Detection:</strong><ul><li>Integrated WyattQELS™ module inside the DAWN</li><li>External fiber optic connection with DynaPro NanoStar or Mobius DLS-ELS instruments</li></ul></li></ul><h5><strong>Laser Specifications</strong></h5><ul><li><strong>Wavelength:</strong> Standard 658 nm ± 4 nm; optional 785 nm for fluorescent samples</li><li><strong>Power Control:</strong> Programmable from 10% to 100%</li></ul><h5><strong>Flow Cell Options</strong></h5><ul><li><strong>Fused Silica:</strong> Ideal for solvents with refractive index &lt; 1.50</li><li><strong>F2 Glass:</strong> Recommended for solvents with refractive index &gt; 1.50</li></ul><h5><strong>Temperature Control Options</strong></h5><ul><li><strong>Ambient operation</strong></li><li><strong>Heated/Cooled (HC):</strong> -15 °C to +150 °C</li><li><strong>Ultra-High Temperature (UHT):</strong> Ambient to +210 °C</li></ul><h5><strong>Electronics and Connectivity</strong></h5><ul><li><strong>Analog Inputs:</strong> 4 differential inputs, 24-bit resolution, range -10 V to +10 V</li><li><strong>Analog Outputs:</strong> 2 outputs from selectable measurement channels, -10 V to +10 V</li><li><strong>I/O Options:</strong> Alarm in/out, auto-inject control, and Orbit™ valve integration</li><li><strong>Computer Interface:</strong> Ethernet</li><li><strong>Display:</strong> 10.1” high-resolution capacitive touchscreen with multi-touch controls</li></ul><h5><strong>Instrument Dimensions</strong></h5><ul><li><strong>Size:</strong> 58 cm (L) x 36 cm (W) x 26 cm (H)</li></ul><h4><strong>Other MALS Instruments</strong></h4><ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1115"><strong>miniDAWN™</strong></a> &nbsp;- Second only to the DAWN in sensitivity. Incorporates detectors at 3 angles to determine molar masses from 200 Da to 10 MDa and radii from 10 – 50 nm. Ambient only.</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1116"><strong>microDAWN™</strong></a><strong>&nbsp;</strong> - The first MALS detector for UHPLC, with interdetector dispersion as low as 1.5 µL. Incorporates detectors at 3 angles to determine molar masses from 200 Da to 20 MDa and radii from 10 – 50 nm. Ambient only.</li><li><strong>ultraDAWN™</strong> &nbsp;- Measures multi-angle light scattering and reports the results – weight-average molecular weight <i>M<sub>w</sub></i> &nbsp;and rms radius <i>R<sub>g</sub></i> &nbsp;– in real time.</li></ul>

Waters/Wyatt miniDAWN™ Multi Angle Light Scattering (MALS) Detector

The Best in Basic Multi-Angle Light Scattering for Absolute Macromolecular Analysis.

<h4><strong>Overview</strong></h4><h5><strong>Molar Mass</strong></h5><p>The miniDAWN determines absolute molar mass and size to characterize proteins, peptides, small polymers and nanoparticles in solution. Coupled to size exclusion chromatography (SEC or GPC), it eliminates the uncertainty and hassle of column calibration, for true confidence in macromolecular characterization.</p><h5><strong>Superb Sensitivity</strong></h5><p>The miniDAWN not only offers superb sensitivity—it further enhances productivity thanks to greatly enhanced field serviceability and easy data analysis with <strong>One-Click </strong><i><strong>M<sub>w</sub></strong></i><strong>™</strong> .</p><h5><strong>Compatible with ASTRA™&nbsp;</strong></h5><p>The miniDAWN is accompanied by <strong>ASTRA,</strong> the most versatile software package available for analysis of online multi-angle and dynamic light scattering. ASTRA and the miniDAWN incorporate advanced ease-of-use features that help guarantee excellent measurements with a single click.</p><h4><strong>Product Description</strong></h4><h5><strong>Molar mass, absolutely</strong></h5><p>Wyatt's miniDAWN is most often used in conjunction with size exclusion chromatography (SEC-MALS) or field-flow fractionation (FFF-MALS) to determine distributions of molecular weight, size and composition. No need to make assumptions about molecular conformation or ideal column interactions.</p><h5><strong>Characterize:</strong></h5><ul><li>Proteins, small peptides and oligonucleotides</li><li>Synthetic and natural polymers</li><li>Nanoparticles, virus-like particles and vesicles</li></ul><h5><strong>Measurement Range:</strong></h5><ul><li>MW from 200 Da to 10 MDa</li><li><i>r<sub>g</sub></i> &nbsp;from 10 to 50 nm, up to 150 nm with shape-specific models</li><li>sensitivity down to 25 ng of 100 kDa polystyrene in THF, injected on a standard GPC column</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_Mini_DAWN_urcuje_molekulovou_hmotnost_nezavisle_na_kalibraci_kolony_Zde_MALS_ukazuje_ze_nejdrive_eluujici_molekula_nema_nejvyssi_molarni_hmotnost_509e5530ea.jpg" alt="Waters: The miniDAWN determines molecular weight independently of column calibration. Here MALS shows that the earliest-eluting molecule does not have the highest molar mass." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_Mini_DAWN_urcuje_molekulovou_hmotnost_nezavisle_na_kalibraci_kolony_Zde_MALS_ukazuje_ze_nejdrive_eluujici_molekula_nema_nejvyssi_molarni_hmotnost_509e5530ea.jpg 245w," sizes="100vw" width="820" height="438"></p><p>The miniDAWN's performance is exceeded only by the <strong>DAWN™</strong> which covers a wider range of size and molecular weight, with even better sensitivity and additional optional modules.</p><h5><strong>Ultrasonic Cleaning Included</strong></h5><p>Each miniDAWN includes an embedded <strong>COMET™ ultrasonic transducer</strong> that cleans the flow cell automatically by agitating the fluid and loosening particles from the glass surfaces.</p><h5><strong>Modularity = Productivity</strong></h5><p>The miniDAWN incorporates a fully modular design. Each module can be tested independently by the software to verify that it is functioning correctly. This imparts nearly complete field serviceability, since malfunctioning modules can be replaced and validated on-site by service engineers with no further calibration or alignment.</p><p>The miniDAWN is also field-upgradeable: the embedded <strong>WyattQELS™ DLS Module </strong>for measuring hydrodynamic radii from 0.5 to 50 nm can be installed on-site as well as in new units shipped from the factory.</p><h5><strong>Not just SEC-MALS...</strong></h5><p>Wyatt's miniDAWN may be used in batch (off-line) mode or in conjunction with a <strong>Calypso™ CG-MALS system</strong> for characterization of average solution properties as well as macromolecular interaction properties including protein-protein binding affinity and complex stoichiometry.</p><h5><strong>Simplicity personified</strong></h5><p>With miniDAWN and <strong>ASTRA™</strong>, SEC-MALS became a whole lot easier. Sample-specific methods are set up in three short steps with ASTRA's Method Wizard, and new capabilities for automatic data processing mean that it takes just one click from your sample to a full report of the molecular weight and size results.</p><p>The miniDAWN's System Ready monitor will even let you know when the system is fully equilibrated with low baseline noise, ready to run.</p><h4><strong>Specifications</strong></h4><h5><strong>Measurement Capabilities</strong></h5><ul><li><strong>Molar Mass Range:</strong><br>200 Da to 10 MDa for proteins; up to 1 MDa for linear polymers (depending on dn/dc, sample concentration, and chromatography conditions).</li><li><strong>Molecular Size (Radius of Gyration, Rg):</strong><br>Approximately 10 nm to 50 nm, extendable up to 150 nm with shape-specific modeling.</li><li><strong>Hydrodynamic Radius (Rh):</strong><ul><li><strong>Flow mode:</strong> 0.5 nm to 50 nm (optimal at flow rates ≤ 0.3 mL/min)</li><li><strong>Batch mode:</strong> 0.5 nm to 1 µm (requires WyattQELS™ module or DynaPro™ NanoStar™ with fiber optic connection)</li></ul></li><li><strong>Sensitivity:</strong><br>Detects as little as 25 ng of 100 kDa polystyrene in THF or 500 ng of BSA in PBS using a standard 7.8 mm x 300 mm SEC column with no post-column filter.</li></ul><h5><strong>Fluidics and Compatibility</strong></h5><ul><li><strong>Mobile Phase Compatibility:</strong><br>Compatible with both aqueous and organic solvents.</li><li><strong>Wetted Materials:</strong><br>316 stainless steel, fused silica, and Kalrez.</li></ul><h5><strong>Optical System and Detectors</strong></h5><ul><li><strong>MALS Detectors:</strong><br>Three high-gain, high dynamic range photodiodes at fixed angles.</li><li><strong>Auxiliary Detectors:</strong><ul><li>Laser monitor for stability control</li><li>Forward transmission monitor for absorbing samples and data quality evaluation</li></ul></li><li><strong>Dynamic Range:</strong><br>3,300,000:1</li><li><strong>Optional DLS Detection:</strong><ul><li>Integrated WyattQELS™ module within the miniDAWN chassis</li><li>External fiber optic connection from DynaPro™ NanoStar or Mobius™ DLS-ELS instruments</li></ul></li></ul><h5><strong>Laser Specifications</strong></h5><ul><li><strong>Wavelength:</strong><br>658 nm ± 4 nm</li><li><strong>Power Control:</strong><br>Programmable from 10% to 100%</li></ul><h5><strong>Temperature Control</strong></h5><ul><li><strong>Sample Temperature:</strong> Ambient</li></ul><h5><strong>Electronics and Connectivity</strong></h5><ul><li><strong>Analog Inputs:</strong><br>2 differential inputs, 24-bit resolution, ±10 V range</li><li><strong>Analog Outputs:</strong><br>1 output from a selectable measurement channel, ±10 V range</li><li><strong>I/O Ports:</strong><br>Alarm in/out, auto-inject control, Orbit™ recycle valve support</li><li><strong>Computer Interface:</strong><br>Ethernet</li><li><strong>Data Rate:</strong><br>Up to 36.6 Hz</li></ul><h5><strong>User Interface and Display</strong></h5><ul><li><strong>Front Panel:</strong><br>7” (178 mm) high-resolution multi-touch display for real-time signal viewing, diagnostics, and settings</li></ul><h5><strong>Instrument Dimensions</strong></h5><ul><li><strong>Size:</strong> 58 cm (L) x 36 cm (W) x 18 cm (H)</li></ul><h4><strong>Other MALS Instruments</strong></h4><ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1114"><strong>DAWN™</strong></a> - The most sensitive MALS detector available, anywhere. Incorporates detectors at 18 angles to determine molar masses from 200 Da to 1 GDa and radii from 10 – 500 nm.<ul><li>Standard option: ambient temperature</li><li>Heated/cooled option: -15 °C to +150 °C</li><li>High-temperature option: ambient to +210 °C</li><li>The DAWN offers special options to handle fluorescent samples: fluorescence-blocking filters and an infrared, 785 nm laser.</li></ul></li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1116"><strong>microDAWN™</strong></a><strong> </strong>- The first MALS detector for UHPLC, with interdetector dispersion as low as 1.5 µL. Incorporates detectors at 3 angles to determine molar masses from 200 Da to 20 MDa and radii from 10 – 50 nm. Ambient only.</li><li><strong>ultraDAWN™</strong> - Measures multi-angle light scattering and reports the results – weight-average molecular weight <i>M<sub>w</sub></i> &nbsp;and rms radius <i>R<sub>g</sub></i> &nbsp;– in real time.</li></ul>

Waters/Wyatt microDAWN™ Multi Angle Light Scattering (MALS) Detector

The microDAWN can be coupled to any UHPLC-SEC system to determine absolute molecular weights and sizes of polymers, peptides, or proteins directly, without resorting to column calibration or reference standards.

<h4><strong>Overview</strong></h4><h5><strong>UHPLC-SEC System</strong></h5><p>The microDAWN can be coupled to any UHPLC-SEC system to determine absolute molecular weights and sizes of polymers, peptides, or proteins directly, without resorting to column calibration or reference standards. The microDAWN produces minimal band broadening in order to maintain the narrow peaks typical of UHPLC, while meeting or exceeding the sensitivity of the <strong>miniDAWN™</strong>.</p><h4><strong>Product Description</strong></h4><p>The <strong>microDAWN MALS detector</strong> performs absolute characterization of macromolecules eluting from UHPLC, determining molar mass and size <i>independently </i>of retention time and molecular reference standards. This instrument offers superb sensitivity over a wide range of molar mass, size and concentrations. In most respects the microDAWN is similar to the well-established <strong>miniDAWN™</strong>, a workhorse MALS instrument used in hundreds of labs around the world for characterizing proteins and other molecules smaller than 50 nm in radius.</p><p>Distinctly from the miniDAWN, the <strong>microDAWN</strong> is uniquely <strong>suitable for use in conjunction with UHPLC Size Exclusion Chromatography (SEC-MALS)</strong> thanks to its small interdetector dispersion. In some cases it may be used with ion-exchange or other types of chromatography. Regardless of the specifics, the microDAWN produces minimal band broadening in order to maintain the narrow peaks typical of UHPLC.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_micro_DAWN_MALS_HPLC_detektor_konfigurace_1_4e888650cf.jpg" alt="Waters microDAWN™ Multi Angle Light Scattering (MALS) Instrument: Experimental setup" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_micro_DAWN_MALS_HPLC_detektor_konfigurace_1_4e888650cf.jpg 229w," sizes="100vw" width="894" height="609"></p><ul><li><i>M<sub>w</sub>&nbsp;</i> from 200 Da to 10 MDa</li><li><strong>Sensitivity:</strong> 1.0 µg/mL BSA (66.4 kDa) in PBS; 50 ng/mL 100 kDa polystyrene in THF.</li><li><i>R<sub>g</sub></i> &nbsp;from 10 to 50 nm</li><li>Ultra-stable laser</li></ul><p>The microDAWN and its companion<strong> microOptilab™ Refractive Index Detector</strong> interface to most standard UHPLC systems. As these detectors are based on the advanced technology of Wyatt's miniDAWN and <strong>Optilab™</strong>, respectively, users may be confident in the underlying capabilities cited in <strong>thousands of peer-reviewed publications</strong>.</p><h5><strong>Ultrasonic Cleaning Included</strong></h5><p>Each microDAWN includes a <strong>COMET™ ultrasonic transducer</strong> that cleans MALS flow cells automatically by agitating the fluid and loosening particles from the glass surfaces.</p><h4><strong>Specifications</strong></h4><h5><strong>Measurement Capabilities</strong></h5><ul><li><strong>Molar Mass Range:</strong><br>From 200 Da to 10 MDa for proteins; up to 1 MDa for linear polymers<br><i>(Typical, depending on dn/dc, sample concentration, and chromatography conditions)</i></li><li><strong>Molecular or Particle Size (Radius of Gyration, Rg):</strong><br>10 nm to 50 nm, extendable up to 150 nm with shape-specific modeling</li><li><strong>Hydrodynamic Radius (Rh):</strong><ul><li><strong>Flow mode:</strong> 0.5 nm to 30 nm</li><li><strong>Batch mode:</strong> 0.5 nm to 1 µm<br><i>(Requires WyattQELS™ DLS module or DynaPro™ NanoStar™ with fiber optic connection)</i></li></ul></li><li><strong>Sensitivity:</strong><br>Detects as little as 3.5 ng of 100 kDa polystyrene in THF or 70 ng of BSA in PBS, assuming use of a 15 cm UHPLC-SEC column with no post-column filter</li></ul><h5><strong>Optical System and Detectors</strong></h5><ul><li><strong>MALS Detectors:</strong><br>Three high-gain photodiodes with broad dynamic range for multi-angle light scattering</li><li><strong>Dynamic Range:</strong><br>3,300,000:1</li><li><strong>Auxiliary Detectors:</strong><ul><li>Laser monitor for stabilization feedback</li><li>Forward transmission monitor for absorbing samples and data quality assessment</li></ul></li><li><strong>Optional DLS Detection:</strong><ul><li>Integrated WyattQELS™ module within the microDAWN chassis</li><li>External DLS connection via fiber optic from DynaPro™ NanoStar or Mobius™ DLS-ELS instruments</li></ul></li></ul><h5><strong>Laser Specifications</strong></h5><ul><li><strong>Wavelength:</strong><br>658 nm ± 4 nm</li><li><strong>Power Control:</strong><br>Programmable from 10% to 100%</li></ul><h5><strong>Sample Temperature and Flow Characteristics</strong></h5><ul><li><strong>Sample Temperature:</strong> Ambient</li><li><strong>Interdetector Band Broadening:</strong><ul><li>Upstream detector to microDAWN: &lt; 1.5 µL</li><li>Upstream to downstream detector: &lt; 1.6 µL</li></ul></li></ul><h5><strong>Material Compatibility</strong></h5><ul><li><strong>Wetted Materials:</strong><br>316 stainless steel, fused silica, PEEK, PTFE, and MP35N (iron-free alloy)</li></ul><h5><strong>Electronics and Connectivity</strong></h5><ul><li><strong>Analog Inputs:</strong><br>2 differential inputs, 24-bit resolution, ±10 V input range</li><li><strong>Analog Outputs:</strong><br>1 output from a user-selectable measurement channel, ±10 V range</li><li><strong>I/O Ports:</strong><br>Alarm in/out, auto-inject control, Orbit™ valve integration</li><li><strong>Computer Interface:</strong><br>Ethernet</li><li><strong>Data Transmission Rate:</strong><br>Up to 73 Hz</li></ul><h5><strong>User Interface</strong></h5><ul><li><strong>Display:</strong><br>7” (178 mm) high-resolution multi-touch screen for signal monitoring, instrument settings, and diagnostics</li></ul><h5><strong>Instrument Dimensions</strong></h5><ul><li><strong>Size:</strong> 58 cm (L) x 36 cm (W) x 18 cm (H)</li></ul><h4><strong>Other MALS Instruments</strong></h4><ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1114"><strong>DAWN™</strong></a> - The most sensitive MALS detector available, anywhere. Incorporates detectors at 18 angles to determine molar masses from 200 Da to 1 GDa and radii from 10 – 500 nm.<ul><li>Standard option: ambient temperature</li><li>Heated/cooled option: -15 °C to +150 °C</li><li>High-temperature option: ambient to +210 °C</li><li>The DAWN offers special options to handle fluorescent samples: fluorescence-blocking filters and an infrared, 785 nm laser.</li></ul></li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1115"><strong>miniDAWN™</strong></a><strong> -</strong> Second only to the DAWN in sensitivity. Incorporates detectors at 3 angles to determine molar masses from 200 Da to 10 MDa and radii from 10 – 50 nm. Ambient only.</li><li><strong>ultraDAWN™</strong> - Measures multi-angle light scattering and reports the results – weight-average molecular weight <i>M<sub>w</sub></i> &nbsp;and rms radius <i>R<sub>g</sub></i> &nbsp;– in real time.</li></ul>

Waters/Wyatt ViscoStar HPLC viscometer

Waters ViscoStar is a highly sensitive, on-line differential viscometer used in conjunction with SEC-MALS-IV to determine the size and conformation of all types of biopolymers, synthetic polymers and even proteins and peptides.

<h4><strong>Highly Sensitive</strong></h4><p>A highly sensitive, on-line differential viscometer used in conjunction with <strong>SEC-MALS-IV</strong> to determine the size and conformation of all types of biopolymers, synthetic polymers and even proteins and peptides.</p><h4><strong>Multiple Novel Technologies</strong></h4><p>The ViscoStar incorporates multiple novel technologies to provide the highest sensitivity, stability and solvent compatibility of any available viscometer for GPC. Its ease-of-use and serviceability make it the perfect companion for Wyatt's <strong>DAWN™ light scattering</strong> and <strong>Optilab™ refractive index detectors</strong>.</p><h4><strong>Another path to polymer and protein characterization: SEC-MALS-IV</strong></h4><p>When coupled with size-exclusion chromatography and a concentration detector such as the Optilab™ , the ViscoStar derives the intrinsic viscosity (IV) of polymers. An inherently valuable physico-chemical property in itself, IV is best utilized together with molar mass information from multi-angle light scattering (SEC-MALS-IV) to derive the <i>hydrodynamic radius</i>, <i>conformation</i>, and <i>branching ratio</i> of a macromolecule in solution.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_Visco_Star_pump_pulse_suppression_with_inset_e8c2fbfc18.jpg" alt="Waters ViscoStar: Patented pulse compensation technology in the ViscoStar eliminates pump fluctuations. At the hardware level, the bridge is impedance matched for dynamic balance, greatly reducing the effect of pump pulses. An additional layer of software filtering eliminates residual pump pulses." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_Visco_Star_pump_pulse_suppression_with_inset_e8c2fbfc18.jpg 233w," sizes="100vw" width="348" height="233"></p><h5><strong>Key benefits of the ViscoStar</strong></h5><ul><li><strong>High sensitivity</strong>, equivalent to 100 ng of 100 kDa polystyrene in THF at 1.0 mL/min injected onto a standard GPC column</li><li><strong>High dynamic range</strong> of over 135,000:1. The full measurement range corresponds to over 13 mg/mL of 100 kDa polystyrene in THF</li><li><strong>Extended solvent compatibility</strong> with all-316 stainless steel transducers</li><li><strong>Temperature range </strong>from 4 °C to 70 °C for polymers or proteins that require a range of temperatures</li><li><strong>Minimal band broadening</strong> thanks to fast pressure transducers</li><li><strong>Pump pulse suppression</strong> to below 4 Pa (hardware alone) or 1 Pa (hardware + software) without loss of chromatographic resolution</li><li><strong>Automated capillary bridge tuning</strong> with no moving parts, to guarantee a perfectly balanced bridge, every run</li><li><strong>Enhanced thermal stability</strong> with drift of &lt;2.5 Pa/hour</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_Visco_Star_cmc_plga_intrinsic_viscosity_graphs_be99c5d115.jpg" alt="Waters ViscoStar: The ViscoStar provides the highest available dynamic range and sensitivity in online viscometry. This graph shows the intrinsic viscosities of 1) poly(lactic co-glycolic acid), or PLGA, in THF and 2) carboxymethyl cellulose, or CMC, in aqueous mobile phase, both measured with a ViscoStar and Optilab, spanning a range from tens to thousands of mL/g. The same instruments readily measure intrinsic viscosity values in the low single digits with excellent signal-to-noise, even at very low concentrations." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_Visco_Star_cmc_plga_intrinsic_viscosity_graphs_be99c5d115.jpg 236w," sizes="100vw" width="406" height="268"></p><h5><strong>SEC-IV without MALS?</strong></h5><p>Yes, as much as we love MALS for optimal polymer analysis, it's true that there are occasions when it just won't fit the bill.</p><p><i><strong>Universal calibration</strong></i> is a parallel technique to SEC-MALS for determining molecular weight, commonly used to characterize linear polymers. While universal calibration overcomes some of the problematic issues associated with column calibration by reference molecules, it does not account for non-ideal column behavior caused by chemical solute-column interactions or hyperbranching.</p><p><strong>Universal calibration is particularly-well suited to replace MALS for:</strong></p><ul><li><strong>Strongly fluorescent polymers</strong>, in particular those not adequately addressed by a <strong>DAWN™</strong> with long-wavelength (785 nm) laser or a standard DAWN (685 nm) with fluorescence-blocking filters.</li><li><strong>Weakly-scattering</strong> polymer/solvent systems with very low <i>dn</i>/<i>dc</i> values</li></ul><p><i><strong>The Mark-Houwink-Sakurada relationship</strong></i> makes use of empirical relationships between intrinsic viscosity and molar mass, specific to each polymer and solvent, to estimate molar mass from SEC-IV measurements. Of course, the best way to determine MHS coefficients is to measure them using <strong>SEC-MALS-IV and ASTRA™</strong>!</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_Visco_Star_v3_protein_rh_measurements_0951d3769a.jpg" alt="Waters ViscoStar: Three IgG proteins with similar MWs eluted at different elution volumes. To understand their different elution properties, online DLS is typically used to measure the hydrodynamic radius, R h , of a protein. However, online DLS did not provide reliable insights, in this case due to the relatively high experimental uncertainty of the DLS. The precise Rh values obtained with a MALS detector and the ViscoStar III, on the other hand, clearly revealed the causes. IgG B eluted later than IgG A due to its more compact structure; IgG C had a slight interaction with the SEC column." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_Visco_Star_v3_protein_rh_measurements_0951d3769a.jpg 237w," sizes="100vw" width="401" height="264"></p><h4><strong>Specifications</strong></h4><h5><strong>Measurement Capabilities – Differential Viscosity</strong></h5><ul><li><strong>Sensitivity:</strong><br>Detects as little as 0.1 µg of 100 kDa polystyrene in THF at 1 mL/min under typical GPC conditions.</li><li><strong>Differential Pressure Performance:</strong><ul><li><strong>Noise:</strong> &lt; 0.05 Pa</li><li><strong>Range:</strong> 6.9 kPa, with built-in overpressure protection</li><li><strong>Drift:</strong> &lt; 2.5 Pa/hr</li><li><strong>Linearity:</strong> Within 0.5% of full scale</li><li><strong>Dynamic Range:</strong> 135,000:1</li></ul></li><li><strong>Capillary Bridge Autobalance:</strong><br>Thermally regulated, leak-free mechanism ensures stable baseline and precision.</li><li><strong>Sample Shear Rate:</strong><br>Up to 5000 Hz with water at 1 mL/min</li></ul><h5><strong>Fluidics and Flow Compatibility</strong></h5><ul><li><strong>Maximum Flow Rate:</strong><ul><li>Aqueous: 1.5 mL/min</li><li>THF: 3 mL/min</li></ul></li><li><strong>Delay Volume Options:</strong><br>Configurable at 16.2, 10.8, or 5.4 mL; optional factory-installed upgrade to 32.4 mL<br><i>(Note: actual column fluid volume is approx. half the listed value)</i></li><li><strong>Maximum Inlet-to-Outlet Pressure:</strong><br>690 kPa</li><li><strong>Wetted Materials:</strong><br>316 stainless steel, PTFE, zirconium silicate, Kalrez, Inconel, and 26-1 stainless steel – all selected for chemical resistance and long-term durability</li></ul><h5><strong>Temperature Control</strong></h5><ul><li><strong>Operating Range:</strong><br>4 °C to 70 °C</li><li><strong>Stability:</strong><br>Maintains temperature within &lt; 0.005 °C for precise measurements</li><li><strong>Ambient Conditions:</strong><br>0 °C to 40 °C; relative humidity 20% to 70%</li></ul><h5><strong>Electronics and Connectivity</strong></h5><ul><li><strong>Digital Output:</strong><br>20-bit resolution at 10 Hz for high-fidelity data</li><li><strong>Auxiliary I/O:</strong><ul><li><strong>Inputs:</strong> Autoinject contact closure, Alarm In, and 2 analog inputs (18-bit, ±10 V)</li><li><strong>Outputs:</strong> Autoinject retransmit, Alarm Out, Recycle Out</li></ul></li><li><strong>Communication Interface:</strong><br>Ethernet for seamless integration into lab networks and data systems</li></ul><h5><strong>User Interface</strong></h5><ul><li><strong>Front Panel Display:</strong><br>7” (178 mm) high-resolution capacitive touchscreen for monitoring signals, diagnostics, and adjusting settings with ease</li></ul><h5><strong>Instrument Dimensions</strong></h5><ul><li><strong>Size:</strong> 58 cm (L) × 36 cm (W) × 18 cm (H)</li></ul><h4><strong>Other Viscometers</strong></h4><ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1267"><strong>microViscoStar™</strong> </a>- Similar to the ViscoStar but designed specifically for use with UHPLC/APC.</li></ul>

Watrex Streamline GPC system

GPC system is an isocratic HPLC system consisting of one P1 pump, CT1i column thermostat with manual injector and RI1 refractive index detector.

<p><strong>GPC system is an isocratic HPLC system consisting of one P1 pump, CT1i column thermostat with manual injector and RI1 refractive index detector.</strong></p><h3><strong>FEATURES</strong></h3><ul><li>Optimized pump mechanics of P1 pump with parallel piston design offers excellent flow rate accuracy and low RI signal pulsation.</li><li>The thermal isolated optic with a counter-current heat exchanger and programmable temperature control, results in an extremly stable baseline and an optimal Signal/Noise ratio od RI1.</li><li>The system can be upgraded with autosampler and fraction collector, or VD 400 Viscometer Detector.</li><li>Data acquisition, processing and instrument control is done by Clarity Chromatography Station with GPC option or Agilent TriSEC software.</li></ul><h3><strong>TECHNICAL SPECIFICATION</strong></h3><ul><li><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/?s=streamline+p1+pump&amp;post_type=product&amp;dgwt_wcas=1?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>P1 HPLC pump: Flow Rates</strong></a></li><li><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/chromatography/detectors/other-hplc-detectors/streamline-ri1-detector/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>RI1 refractive index detector</strong></a></li><li><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/chromatography/column-thermostats/streamline-ct1-columm-thermostat/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>CT1 Column thermostat</strong></a></li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/999"><strong>Clarity™ Chromatography Station</strong></a></li></ul><h5><strong>COMPONENT SPECIFICATION - P1 HPLC pump: Flow Rates</strong></h5><ul><li><strong>Flow Rates:</strong> 0.001 to 10.000 mL/min</li><li><strong>Pressure:</strong> 0 to 6,000 psi (42 MPa)</li><li><strong>Flow precision:</strong> &gt; 0.2% RSD</li><li><strong>Flow accuracy:</strong> ± 1 % @ 1mL/min and 7 MPa,</li><li><strong>Pressure accuracy:</strong> ± 2% of full-scale, with 80:20 H2O/IPA @ 7 MPa</li><li><strong>Pulsation:</strong> ± 0.5 % @ 1mL/min and 7 MPa</li><li><strong>Remote inputs:</strong> USB</li></ul><h5><strong>COMPONENT SPECIFICATION - RI1 refractive index detector</strong></h5><ul><li><strong>Light Source:</strong> Long-life LED</li><li><strong>Refractive index Range:</strong> 1.00 - 1.75 RIU</li><li><strong>Baseline Noise:</strong> ± 2.5 nRIU</li><li><strong>Baseline Drift:</strong> 200 nRIU/h</li><li><strong>Linearity:</strong> &gt; 1000 μRIU</li><li><strong>Flow cell pressure resistance:</strong> 5 bar</li><li><strong>Flow cell volume:</strong> 15 μl</li><li><strong>Time constant:</strong> 0.00/0.01/0.02/0.05/0.1/0.2/0.5/1.0/2.0/5.0/10.0 s</li><li><strong>Analog Output:</strong> 1x 0-2.5V</li><li><strong>Outputs:</strong> Event 1, Start (OUT), Error (OUT), + 5 V, 24 V Valve</li></ul><h5><strong>COMPONENT SPECIFICATIONS - CT1 Column thermostat</strong></h5><ul><li><strong>Temperature range:</strong> 10 °C above ambient temperature to 100 °C</li><li><strong>Temperature accuracy:</strong> max. 0,5 % of actual temperature</li><li><strong>Temperature stability:</strong> RSD &lt; 0,4 %</li><li><strong>Settability:</strong> 0,1 °C</li><li><strong>Internal dimensions:</strong> 320 x 50 x 30 mm (L x W x H)</li><li><strong>Compartment material:</strong> PTFE coated metal</li><li><strong>Compartment connection:</strong> USB</li><li><strong>Control:</strong> build-in color touch panel, datasystem</li></ul><h5><strong>COMPONENT SPECIFICATIONS - </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/999"><strong>Clarity™ Chromatography Station:</strong></a></h5><p>Advanced chromatographic datastation for data acquisition and evaluation supported with <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1004"><strong>GPC module for MWD, Mw, Mn, Mz calculation</strong></a>. Enables rutine separations with pre-set methods, containing all experimental and conditions and data evaluation settings. PC Win 10 Professional with LCD monitor included.</p><h3><strong>Ordering information:</strong></h3><h5><strong>PN/Component:</strong></h5><ul><li><strong>SGPC01-001</strong> Streamline™ manual GPC system with Refractive index detector (Includes P1 pump, RI1 detector, CT1i column thermostat with manual injector, solvent rack, Clarity PC station)</li></ul><p><strong>Optional configurations:</strong></p><ul><li><strong>ST99-002</strong> Remove CT1i column thermostat with manual injector from system</li><li><strong>SAS90-001</strong> Add AS1 Autosampler to system</li><li><strong>SFC90-001</strong> Add FC1 Fraction collector to system</li></ul>

Waters ACQUITY Advanced Polymer Chromatography (APC) System

The ACQUITY APC System Increase sample throughput and laboratory operations by obtaining accurate and repeatable sample separation up to 20 time faster than before.

<div><div><h4><strong>The highest performance for polymers and oligomers</strong></h4></div></div><div><div><p><strong>Today’s polymer scientists operate within an increasingly dynamic market space, one with a growing demand for high-performing materials, bio-material innovations, and intense competition. But the long run times of traditional chromatography polymer characterization has made keeping up with this demand a challenge for many labs.</strong></p><p>Not anymore. With the <strong>next era in polymer separation</strong>, the <strong>ACQUITY Advanced Polymer Chromatography (APC) System</strong>, you can achieve the <strong>highest resolution size-based separations</strong> for <strong>chromatographic polymer and oligomer characterization</strong>, all <strong>faster than ever</strong>. With the <strong>ACQUITY APC System</strong>, you can <strong>improve data consistency and quality</strong> with <strong>fast, daily calibration</strong>, and <strong>automate your method development</strong> with <strong>advanced system technologies</strong> – so you can <strong>innovate faster</strong> while <strong>improving lab operations.</strong></p><div><div><div><div><h3><strong>Features and Benefits</strong></h3><ul><li><strong>Accelerate your insights</strong> - Reduce laboratory turnaround times for polymer samples by getting answers to your development labs, your manufacturing operations teams, and your customers 5 to 20 times faster than traditional SEC/GPC with the ultra-low system dispersion of the ACQUITY APC System paired with <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1950"><strong>ACQUITY APC Columns</strong></a>.</li><li><strong>Get the accurate data you need for informed decisions</strong> - Gain more insight into your polymer samples through compatibility with a wide range of specific detection techniques (refractive index, UV/Vis, PDA, ELS) and third-party advanced detectors like multi-angle light scattering and viscometry. Get accurate molecular weight (MW) data every day with the precise flow delivery of the isocratic solvent manager.</li><li><strong>Optimize method development, even in harsh conditions</strong> - Optimize method development via rapid and automated solvent switching and aggressive solvent compatibility, which supports the harsh separation conditions associated with polymer analyses.</li><li><strong>Improve lab efficiency with one system</strong> - Increase analytical scope and laboratory efficiency by leveraging one system to perform multiple applications, including basic liquid chromatography (LC), gradient, isocratic, reverse-phase, and gel permeation chromatography (GPC).</li><li><strong>Simplify your column management</strong> - Simplify and optimize column bank calibration through standards that are matched to column bank MW ranges. Versatile column management allows you to automatically select up to two banks of <strong>ACQUITY APC</strong> columns and up to two banks of traditional GPC columns - all housed in a stable, temperature-controlled environment.</li></ul></div></div><div><div><h4><strong>Recommended Use</strong></h4><p>Highest-resolution, size-based separations for chromatographic polymer and oligomer characterization.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_ACQUITY_APC_System_nakonfigurovany_pro_automaticke_prepinani_jak_APC_tak_GPC_kolon_e198c774f4/Waters-ACQUITY-APC-System-nakonfigurovany-pro-automaticke-prepinani-jak-APC-tak-GPC-kolon.jpg" alt="Waters ACQUITY Advanced Polymer Chromatography (APC) System." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_ACQUITY_APC_System_nakonfigurovany_pro_automaticke_prepinani_jak_APC_tak_GPC_kolon_e198c774f4/thumbnail_Waters-ACQUITY-APC-System-nakonfigurovany-pro-automaticke-prepinani-jak-APC-tak-GPC-kolon.jpg 213w," sizes="100vw" width="969" height="710"></p><div><div><h3><strong>Accelerate innovation with enhanced insight</strong></h3><p>Harnessing the benefits of advanced polymer chromatography with the ACQUITY APC System means obtaining accurate and repeatable polymer and oligomer molecular weight information anywhere between<strong> 5 to 20 times faster than was possible</strong> with traditional<strong> GPC/SEC technology</strong> - so you can innovate faster while improving laboratory operations.</p><p><strong>With the ACQUITY APC System, you can:</strong></p><ul><li><strong>Reduce laboratory turnaround times for polymer samples&nbsp;</strong>by getting answers to your development labs, your manufacturing operations teams, and your customers - faster.</li><li><strong>Drive innovation</strong>&nbsp;with faster results and more information so that your entire operation can respond more rapidly by decreasing development cycle times and accelerating time to market.</li><li><strong>Streamline process monitoring</strong>&nbsp;and achieve better batch control with the agility to make timely decisions “on-the-fly” about process and synthesis optimization<strong>.</strong></li><li><strong>Significantly reduce the analysis cost per sample</strong>&nbsp;by reducing solvent consumption and waste disposal volumes.</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_ACQUITY_Advanced_Polymer_Chromatography_APC_System_ca5154865a.jpg" alt="Waters ACQUITY Advanced Polymer Chromatography (APC) System: Accelerate your innovation with enhanced insight into polymer chemical structure with the ACQUITY APC System." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_ACQUITY_Advanced_Polymer_Chromatography_APC_System_ca5154865a.jpg 245w," sizes="100vw" width="1024" height="600"></p><div><div><h3><strong>Optimize method development with solvent switching and compatibility</strong></h3><p>Using the ACQUITY APC System with <strong>Polymer Quaternary Solvent Manager</strong> (p-QSM) <strong>technology </strong>provides chemists and polymer scientists with the ultimate flexibility to analyze the most complex polymer blends and additives using standard polymer chromatography, gradient polymer elution chromatography (GPEC), and reverse-phase LC with a single system.</p><p>Additional system features allow automated solvent selection of up to six different solvents. Automated column bank switching capabilities can also be paired with the rigid and solvent-resilient particles of the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1950"><strong>ACQUITY APC Columns</strong></a> to achieve the world’s first truly automated solution for method development of size-based polymer separations. This supports separation of polymers in hours, instead of days.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_ACQUITY_Advanced_Polymer_Chromatography_APC_System_2_b95f96f0a2.jpg" alt="Waters ACQUITY Advanced Polymer Chromatography (APC) System: Repeatable analysis of poly (methyl methacrylate co ethylacrylate) using the same two running ACQUITY APC 4.6 x 150 mm Columns (450 Å and 125 Å) in series after automated switching of the solvents from THF to toluene to DMF and back to THF." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_ACQUITY_Advanced_Polymer_Chromatography_APC_System_2_b95f96f0a2.jpg 245w," sizes="100vw" width="1024" height="609"></p></div></div><div><div><h3><strong>Use advanced detection for even more insights</strong></h3><p>Get the valuable decision-making information you need from a single analysis by equipping the ACQUITY APC System with advanced detectors. Combining the ACQUITY APC System with advanced detection solutions significantly increases information attainable from <strong>size-exclusion chromatography</strong> (SEC) analysis through addition of <strong>refractive index</strong> (RI), <strong>ultraviolet </strong>(UV),<strong> photodiode array </strong>(PDA), <strong>light scattering</strong> (LS), and <strong>differential viscometry</strong> (IV). Advanced detection options from <strong>Wyatt Technology</strong> are seamlessly integrated with ACQUITY APC System, enabling you to fully characterize samples to better inform the structure-property relationship of novel complex polymers.</p></div></div><div><div><h3><strong>Keep pace with your research with dedicated consumables</strong></h3><p>The ACQUITY APC System is even more powerful with <a target="_blank" rel="noopener noreferrer" href="https://www.waters.com/nextgen/global/products/columns/acquity-apc-columns.html"><strong>ACQUITY APC Columns</strong></a> and <a target="_blank" rel="noopener noreferrer" href="https://www.waters.com/nextgen/global/products/standards-and-reagents/acquity-advanced-polymer-chromatography-calibration-standards-ki.html"><strong>ACQUITY APC Calibration Standards Kits</strong></a>. The Ethylene Bridged Hybrid (BEH) Technology in ACQUITY APC Columns creates particles that ensure extreme column performance and long column lifetime under harsh operating conditions – ideal for general purpose, reversed-phase chromatography, and for method development due to extreme pH stability and applicability to the broadest range of compound classes.</p><p>With run times of less than 10 minutes, a bank of ACQUITY APC Columns can be <strong>calibrated in less than 30 minutes</strong> using ACQUITY APC Calibration Standards Kits.&nbsp;These standard kits have been matched to the MW range of ACQUITY APC Columns, generating a 10-point calibration for any bank combination in a simple dilute-and-shoot format. With daily column bank calibration, you can greatly improve data consistency to increase confidence in batch-to-batch measurements. Select the best column and calibration standards for a given application with our convenient <a target="_blank" rel="noopener noreferrer" href="https://www.waters.com/waters/promotionDetail.htm?id=134823417">selector tool</a>.&nbsp;</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_ACQUITY_Advanced_Polymer_Chromatography_APC_System_4_056bb6d284.jpg" alt="Waters ACQUITY Advanced Polymer Chromatography (APC) System: Ethylene Bridged Hybrid (BEH) Technology helps you keep up with the pace of your research with state-of-the-art reversed-phase and HILIC HPLC columns." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_ACQUITY_Advanced_Polymer_Chromatography_APC_System_4_056bb6d284.jpg 245w," sizes="100vw" width="1024" height="620"><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_ACQUITY_Advanced_Polymer_Chromatography_APC_System_5_7a814e249b.jpg" alt="Waters ACQUITY Advanced Polymer Chromatography (APC) System: Improve data and consistency with ACQUITY APC Calibration Standards." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_ACQUITY_Advanced_Polymer_Chromatography_APC_System_5_7a814e249b.jpg 245w," sizes="100vw" width="1024" height="591"></p></div></div></div></div></div></div></div></div></div></div>

Waters SEC Columns

Get unmatched batch-to-batch reproducibility with the wide range of Waters Size-Exclusion Chromatography (SEC) Columns and standards for protein and peptide characterization.

<h4><strong>Size-based separations of peptides, proteins, nucleic acids, LNPs, and viral vectors</strong></h4><p>Get unmatched batch-to-batch reproducibility with the wide range of <strong>Waters Size-Exclusion Chromatography (SEC) Columns</strong> and standards for protein and peptide characterization.</p><p><strong>SEC</strong> is a powerful technique for aggregate and fragment analysis in the <strong>research, development</strong>, and <strong>manufacturing of biotherapeutic proteins</strong>, such as <strong>insulin</strong> and <strong>monoclonal antibodies</strong> (mAb). With SEC, also known as gel filtration, you can separate proteins based on their size (hydrodynamic radii versus absolute molecular weight) in solution, with larger sized species eluting before smaller proteins.</p><p>The <strong>pore size and volume</strong> of the SEC particles used in the packed column drives this <strong>isocratic based technique</strong>, so the column you choose matters. As the molecular weight of the proteins of interest increases, SEC columns with comparatively larger pore size particles are selected.</p><h4><strong>Overview</strong></h4><ul><li>Gain efficiency with this “platform based” method for <strong>proteins ranging from 10,000 to 650,000 Daltons</strong>, leveraging <strong>MaxPeak Premier Technology</strong> coupled with <strong>BEH-PEO Particle Technology&nbsp;</strong> &nbsp;&nbsp;</li><li><strong>Minimize non-desired secondary interactions </strong>for improved separation reproducibility and results with Ethylene Bridged Hybrid (BEH) SEC particles</li><li>Ensure reliable <strong>column-to-column and batch-to-batch performance</strong> with columns quality control tested with relevant peptide, protein, and mAb samples &nbsp;</li><li>Achieve reliable <strong>high throughput analysis on UPLC</strong> systems with our <strong>1.7 µm particle size</strong> offering and reproducible separations on any <strong>HPLC, UHPLC, or UPLC system</strong> to address different application needs with <strong>2.5 µm&nbsp;</strong></li><li><strong>Extend analytical column life</strong> and<strong> lower cost per analyses </strong>with SEC Guards&nbsp;</li><li>Confirm on-site SEC column and LC system performance with available BEH125, BEH200, BEH450, and mAb Size Variant Standards &nbsp;&nbsp;</li><li><strong>Manufactured in a cGMP, ISO 9001</strong> certified plant using stringent manufacturing protocols and ultra-pure reagents</li></ul><p><strong>Recommended Use: </strong>For size-based peptide, protein, and viral vector analyses.</p><h4><strong>System Dispersion Specifications for Column Recommendations</strong></h4><h5><strong>LC System Dispersions &lt;20 µL (UPLC)</strong></h5><ul><li>ACQUITY Premier Protein SEC 250 Å Guards and Columns</li><li>ACQUITY UPLC Protein BEH SEC 125 Å, 200 Å, and 450 Å Guards and Columns</li><li>1.7 µm guards and columns for low dispersion UPLC systems</li></ul><h5><strong>LC System Dispersions &gt;20 µL – ≤35 µL (UHPLC)</strong></h5><ul><li>XBridge Premier Protein SEC 250 Å Guards and Columns</li><li>XBridge Protein BEH SEC 125 Å, 200 Å, and 450 Å Guards and Columns</li><li>BioResolve mAb SEC Guards and Columns</li><li>2.5 µm guards and columns for UHPLC systems</li></ul><h5><strong>LC System Dispersions &gt;35 µL (HPLC)</strong></h5><ul><li>XBridge Protein BEH SEC 125 Å, 200 Å, and 450 Å Guards and Columns</li><li>XBridge Premier Protein SEC 250 Å Guards and Columns</li><li>BioResolve mAb SEC Guards and Columns</li><li>BioSuite SEC Guards and Columns</li><li>3.5 µm guards and columns for HPLC systems</li></ul><h4><strong>GTxResolve SEC Columns</strong></h4><h5><strong>GTxResolve Premier BEH SEC 450 Å Columns</strong></h5><ul><li>2.5 µm particle size columns for UHPLC and UPLC separations</li><li>Lower secondary interactions and lower noise suitable for platform methods</li><li>Low adsorption hardware necessary for analysis of biologics samples</li><li>450 Å pore size with up to 50% higher resolving power reducing need for sample consumption, resulting in faster analyses<ul><li><a target="_blank" rel="noopener noreferrer" href="https://www.waters.com/nextgen/us/en/products/columns/GTxResolve-sec-columns.html"><strong>Explore GTxResolve SEC Columns</strong></a></li></ul></li></ul><h5><strong>GTxResolve Premier SEC 1000 Å Columns</strong></h5><ul><li>3 µm columns for UHPLC and UPLC separations</li><li>1000 Å columns with high efficiency for aggregate analysis of GTx drugs with diameter of 80-200 nm</li><li>Low secondary interaction &amp; improved compatibility with universally applied detector, such as MALS</li><li>Low adsorption hardware necessary for analysis of biologics samples<ul><li><a target="_blank" rel="noopener noreferrer" href="https://www.waters.com/nextgen/us/en/products/columns/GTxResolve-sec-columns.html"><strong>Explore GTxResolve SEC Columns</strong></a></li></ul></li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_G_Tx_Resolve_SEC_Columns_1b8741a62b.jpg" alt="Waters: GTxResolve SEC Columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_G_Tx_Resolve_SEC_Columns_1b8741a62b.jpg 234w," sizes="100vw" width="1024" height="682"></p><h4><strong>Protein SEC Columns</strong></h4><h5><strong>ACQUITY Premier Protein SEC 250 Å Guards and Columns</strong></h5><ul><li>Sub-2-μm particle columns for UPLC separations</li><li>250 Å pore size</li><li>High throughput &amp; resolution SEC separations of biomolecules ranging from 10,000 to 650,000 Daltons on low dispersion UPLC Systems</li><li>Available SEC Guard Columns to extend analytical SEC Column life</li><li>Significantly reduce non-desired ionic and hydrophobic secondary interaction for desired SEC platform methods with MaxPeak Premier Technology and BEH-PEO SEC particle technology<ul><li><a target="_blank" rel="noopener noreferrer" href="https://www.waters.com/nextgen/us/en/products/columns/acquity-premier-columns.html"><strong>Explore ACQUITY Premier Protein BEH SEC Guards and Columns</strong></a></li></ul></li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_ACQUITY_Premier_Columns_featuring_Max_Peak_HPS_Technology_11a541350e.jpg" alt="Waters: ACQUITY Premier Columns featuring MaxPeak HPS Technology" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_ACQUITY_Premier_Columns_featuring_Max_Peak_HPS_Technology_11a541350e.jpg 234w," sizes="100vw" width="1024" height="682"></p><h5><strong>XBridge Premier Protein SEC 250 Å Guards and Columns</strong></h5><ul><li>2.5 μm particle columns for HPLC and UHPLC separations</li><li>250 Å pore size</li><li>High resolution SEC separations of biomolecules ranging from 10,000 to 650,000 Daltons on any LC system</li><li>Available SEC Guard Columns to extend analytical SEC Column life</li><li>Significantly reduce non-desired ionic and hydrophobic secondary interaction for desired SEC platform methods with MaxPeak Premier Technology and BEH-PEO SEC particle technology</li><li>Specifically designed and QC tested with NIST-based, mAb Size Variant Standard to help ensure batch-to-batch consistency<ul><li><a target="_blank" rel="noopener noreferrer" href="https://www.waters.com/waters/global/Waters-XBridge-Premier-Columns/nav.htm"><strong>Explore XBridge Premier Protein BEH SEC Columns</strong></a></li></ul></li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_X_Bridge_Premier_Columns_0230c90278.jpg" alt="Waters: XBridge Premier Columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_X_Bridge_Premier_Columns_0230c90278.jpg 193w," sizes="100vw" width="950" height="768"></p><h5><strong>BioResolve mAb SEC Guards and Columns</strong></h5><ul><li>2.5 μm particle columns for UPLC, UHPLC, and HPLC separations</li><li>200 Å pore size</li><li>Obtain reproducible, accurate quantitation of monoclonal antibodies (mAbs), associated high molecular weight aggregates (&gt;300,000 Da), and lower molecular weight fragments (e.g., &lt;100,000 Da)</li><li>Each packed column is tested with NIST-based, mAb size variant standard to help ensure batch-to-batch and column-to-column performance consistency<ul><li><a target="_blank" rel="noopener noreferrer" href="https://www.waters.com/waters/global/BioResolve-SEC-mAb-Consumables-%7C-SEC-Guards/nav.htm"><strong>Explore BioResolve mAb SEC Guards and Columns</strong></a></li></ul></li></ul><h5><strong>ACQUITY UPLC Protein BEH SEC Guards and Columns</strong></h5><ul><li>Sub-2-μm particle columns for UPLC separations (2.5 μm for 450 Å)</li><li>Pore size options include: 125 Å, 200 Å, and 450 Å</li><li>Available SEC Guard Columns to extend analytical SEC Column life</li><li>Specifically designed and QC tested with BEH125, BEH200, or BEH450 protein standards to help ensure batch-to-batch consistency</li><li>10x faster than traditional HPLC-based SEC<ul><li><a target="_blank" rel="noopener noreferrer" href="https://www.waters.com/nextgen/us/en/products/columns/acquity-uplc-columns.html"><strong>Explore ACQUITY UPLC Protein BEH SEC Guards and Columns</strong></a></li></ul></li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_Acquity_UPLC_kolony_1dc5c25d3e/Waters-Acquity-UPLC-kolony.jpg" alt="Waters: Acquity UPLC columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_Acquity_UPLC_kolony_1dc5c25d3e/thumbnail_Waters-Acquity-UPLC-kolony.jpg 245w," sizes="100vw" width="807" height="407"></p><h5><strong>XBridge Protein BEH SEC Columns</strong></h5><ul><li>2.5 μm particle columns for use on any UPLC, UHPLC, or HPLC system</li><li>Pore size options include: 125 Å, 200 Å, and 450 Å</li><li>Available SEC Guard Columns to extend analytical SEC Column life</li><li>Specifically designed and QC tested with BEH125, BEH200, or BEH450 protein standards to help ensure batch-to-batch consistency<ul><li><a target="_blank" rel="noopener noreferrer" href="https://www.waters.com/waters/global/XBridge-BEH-Columns-for-High-pH-Chromatography/nav.htm"><strong>Explore XBridge Protein BEH SEC Columns</strong></a></li></ul></li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_X_Bridge_Columns_b0b55de501/Waters-XBridge-Columns.jpg" alt="Waters: XBridge Columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_X_Bridge_Columns_b0b55de501/thumbnail_Waters-XBridge-Columns.jpg 203w," sizes="100vw" width="900" height="691"></p><h4><strong>Peptide SEC Columns</strong></h4><h5><strong>BioSuite SEC Columns</strong></h5><ul><li>Silica-based diol SEC columns</li><li>Molecular weight exclusion limits are determined primarily by the selected pore size</li><li>Available in analytical and semi-preparative column sizes<ul><li><a target="_blank" rel="noopener noreferrer" href="https://www.waters.com/waters/global/BioSuite-Columns/nav.htm"><strong>Explore BioSuite SEC Columns</strong></a></li></ul></li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_Bio_Suite_Columns_bf2bb8249f.jpg" alt="Waters: BioSuite Columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_Bio_Suite_Columns_bf2bb8249f.jpg 184w," sizes="100vw" width="307" height="260"></p><h5><strong>Protein-Pak SEC Columns</strong></h5><ul><li>Based on a 10 μm diol-bonded silica</li><li>Resolve proteins that differ in molecular weight by a factor of two</li><li>Distinguish proteins differing by as little as 15% in molecular weight<ul><li><a target="_blank" rel="noopener noreferrer" href="https://www.waters.com/waters/global/Protein-Pak-HPLC-and-UPLC-Columns/nav.htm"><strong>Explore Protein-Pak SEC Columns</strong></a></li></ul></li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_Protein_Pak_Columns_be6a669326.jpg" alt="Waters: Protein-Pak Columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_Protein_Pak_Columns_be6a669326.jpg 245w," sizes="100vw" width="500" height="315"></p><h4><strong>Choose the right SEC Column for your lab</strong></h4><p>SEC is ideal for aggregate and fragment analysis in the research, development, and manufacturing of biotherapeutic peptides, proteins, and viral vectors, but choosing the right column for your analysis is important. Use the following criteria to choose a column that provides reliable, high quality SEC analyses of various biomolecules, including insulin, monoclonal antibodies, and adeno associated viruses (AAVs).</p><h5><strong>What to consider when choosing an SEC Column:</strong></h5><ul><li>What is the molecular weight of your sample?</li><li>What is the dispersion of your LC system?</li><li>Are you separating components &lt;2 fold difference in molecular weight (MW)?</li><li>Are you separating components &gt;2 fold difference in MW?</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_Choose_the_right_Size_exclusion_chromatography_SEC_column_for_your_analysis_with_Waters_SEC_columns_selection_guide_b81f674f65.jpg" alt="Waters: Choose the right Size-exclusion chromatography (SEC) column for your analysis with Waters SEC columns selection guide." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_Choose_the_right_Size_exclusion_chromatography_SEC_column_for_your_analysis_with_Waters_SEC_columns_selection_guide_b81f674f65.jpg 158w," sizes="100vw" width="1024" height="1013"></p><h4><strong>Addressing the complexity of SEC Separations</strong></h4><p>Experience the advancements in SEC-based technologies to address non-desired specific ionic and hydrophobic interactions for more reliable results with ACQUITY Premier Protein SEC and XBridge Premier Protein SEC Columns and Guards.</p><h5><strong>With MaxPeak Premier SEC Columns, you can:</strong></h5><ul><li>Reproducibly resolve injected sample components that are less than 2x different in size for challenging applications</li><li>Use a ‘platform SEC method’ to reduce method development time and cost</li><li>Ensure batch-to-batch and column-to-column performance</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_Classes_of_therapeutic_proteins_separated_on_an_ACQUITY_Premier_Protein_SEC_Column_d3f74a8ea4.jpg" alt="Waters: Classes of therapeutic proteins separated on an ACQUITY Premier Protein SEC Column." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_Classes_of_therapeutic_proteins_separated_on_an_ACQUITY_Premier_Protein_SEC_Column_d3f74a8ea4.jpg 234w," sizes="100vw" width="1024" height="682"></p>

Products focused on GPC/SEC - page 3

Related content

Aromatase Inhibitor Therapy Is Associated with Distinct Plasma Lipidomic Profiles in Postmenopausal Breast Cancer Patients

Science on the Front Lines: Cleanup of a Benzene Spill

The Future of Ion Chromatography | PFAS Testing, EPA 1621 & AOF Explained