This workflow confirms and quantifies 31 drugs of abuse in oral fluid (including THC) in a 4.5‑minute LC run on the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1149">Thermo Scientific Stellar mass spectrometer</a> using full scan + targeted MS2 (tMS2) with both HCD and CID fragmentation. With 1 µL injection and 0.1% formic acid in water/methanol mobile phases, the method supports ~13 samples/hour (up to ~320/day continuous operation) while maintaining confirmation performance via ion ratios.<blockquote><h5>Method at a glance</h5><ul><li>What matrix is tested? Oral fluid</li><li>How many drugs? 31 drugs of abuse (panel includes THC)</li><li>Run time? 4.5 minutes</li><li>Throughput? ~13 samples/hour → up to ~320 samples/day (24‑hour operation)</li><li>Injection volume? 1 µL</li><li>Mobile phases? 0.1% formic acid in water (A) and 0.1% formic acid in methanol (B)</li><li>MS acquisition? Full scan + targeted MS2 (tMS2)</li><li>Fragmentation? Compound‑optimized HCD and CID in the same targeted list</li><li>Confirmation strategy? Ion ratios with ±20% tolerance (typical confirmatory approach)</li></ul></blockquote><h3>Why oral fluid—and why speed matters</h3>Oral fluid is attractive for clinical and forensic toxicology because collection is simple and the matrix aligns well with high‑volume workflows (workplace/occupational, roadside, and other settings). The challenge is building a method that’s simultaneously:<ul><li>Broad enough for today’s drug panels</li><li>Sensitive enough to reach required cutoffs</li><li>Fast enough to keep sample queues under control</li><li>Confirmation‑ready (consistent product ions and ion ratios)</li></ul>A 4.5‑minute method is a practical lever here: compress runtime, raise throughput, and still keep confirmation quality by optimizing MS/MS conditions per compound.<h3>The LC method</h3>A short, efficient separation is the foundation of the workflow:<ul><li>UHPLC system: <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/744">Thermo Scientific Vanquish Horizon UHPLC</a></li><li>Column: <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/424">Thermo Scientific Accucore Biphenyl</a>, 50 × 2.1 mm, 2.6 µm</li><li>Mobile phase A: 0.1% formic acid in water</li><li>Mobile phase B: 0.1% formic acid in methanol</li><li>Injection volume: 1 µL</li><li>Gradient runtime: 4.5 minutes</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Fisher_Scientific_4_5_Minute_Oral_Fluid_LC_MS_Method_to_Detect_31_Drugs_of_Abuse_Using_Stellar_MS_fd3f3e8ea4.jpg" alt="Thermo Fisher Scientific: 4.5-Minute Oral Fluid LC MS Method to Detect 31 Drugs of Abuse Using Stellar MS: Figure 1: Thermo Scientific Vanquish Horizon UHPLC system." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Fisher_Scientific_4_5_Minute_Oral_Fluid_LC_MS_Method_to_Detect_31_Drugs_of_Abuse_Using_Stellar_MS_fd3f3e8ea4.jpg 120w," sizes="100vw" width="747" height="969"><h3>The MS method (Full scan + targeted MS2 with HCD + CID)</h3><h5>Acquisition approach</h5>This method uses a “two‑layer” strategy for quantitation + confirmation:<ol><li>Full scan (broad coverage, context, quantitative support)</li><li>Targeted MS2 (tMS2) (confirmation‑focused product ions, ion ratios)</li></ol><h5>The key differentiator: HCD and CID in one targeted list</h5>Instead of forcing every analyte into a single fragmentation style, the method uses both:<ul><li>HCD (beam‑type fragmentation)</li><li>CID (resonance‑type fragmentation)</li></ul><h5>Why that improves method development:</h5>Drugs of abuse span multiple chemistries. A single collision approach often works “okay” for most compounds—but one or two analytes can become persistent problems (weak qualifiers, unstable ion ratios, excess noise). Having both HCD and CID available in one method lets you optimize per compound and move faster.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Fisher_Scientific_4_5_Minute_Oral_Fluid_LC_MS_Method_to_Detect_31_Drugs_of_Abuse_Using_Stellar_MS_3_e4a95651a2.jpg" alt="Thermo Fisher Scientific: 4.5-Minute Oral Fluid LC MS Method to Detect 31 Drugs of Abuse Using Stellar MS: Figure 2: Thermo Scientific Stellar mass spectrometer." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Fisher_Scientific_4_5_Minute_Oral_Fluid_LC_MS_Method_to_Detect_31_Drugs_of_Abuse_Using_Stellar_MS_3_e4a95651a2.jpg 245w," sizes="100vw" width="645" height="377"><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Fisher_Scientific_4_5_Minute_Oral_Fluid_LC_MS_Method_to_Detect_31_Drugs_of_Abuse_Using_Stellar_MS_5_88276eec6a.jpg" alt="Thermo Fisher Scientific: 4.5-Minute Oral Fluid LC MS Method to Detect 31 Drugs of Abuse Using Stellar MS: Figure 3: Full scan &amp; targeted MS2 methods, HCD and collision energies used." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Fisher_Scientific_4_5_Minute_Oral_Fluid_LC_MS_Method_to_Detect_31_Drugs_of_Abuse_Using_Stellar_MS_5_88276eec6a.jpg 245w," sizes="100vw" width="768" height="279"><h3>Why CID + HCD flexibility improves confirmation</h3>In this workflow, HCD performed well for most compounds. But for buprenorphine, HCD produced one dominant product ion with additional low m/z noise and noticeable residual precursor. Using CID generated two high‑intensity product ions and delivered consistent ion ratios across the calibration range.When your confirmation hinges on stable ion ratios, the ability to switch fragmentation mode (not just collision energy) is a method‑development advantage—especially for “problem analytes.”<h3>Controllable ionization</h3>Oral fluid methods often deal with limited sample volume and matrix effects. This workflow pairs low injection volume with ionization control using the Thermo Scientific OptaMax Plus HESI source.<ul><li>The OptaMax Plus HESI source supports high probe temperature capability (up to 650 °C).</li><li>In this study, a vaporizer temperature of 500 °C was used to help achieve sensitivity and improve relative peak areas across drugs of abuse.</li></ul>Why this matters: If you’re injecting only 1 µL, ionization stability and efficiency can be the difference between “meets cutoff” and “misses at LOQ.”<h3>Sample preparation</h3>Oral fluid panels become more challenging when THC is included because most drugs of abuse are basic, while THC is largely neutral, and that can stress extraction chemistry.In this workflow, oral fluid calibrators and samples were extracted using a mixed‑mode approach designed to recover THC alongside other drugs:<ul><li>Calibrators prepared across eight levels (broad dynamic range)</li><li>Extraction performed using mixed‑mode chemistry tips (SCX/WAX) in a dispersive SPE‑style workflow</li><li>Steps automated on a liquid handling platform to support high‑throughput consistency</li><li>Samples dried and reconstituted prior to LC‑MS analysis</li><li>Only 1 µL injected per run</li></ul>Even if your lab uses different automation or consumables, the method structure (fast LC + full scan + targeted MS2 with dual fragmentation) transfers well.<blockquote><h5>Throughput math</h5><ul><li>4.5 minutes per injection → 60 / 4.5 = 13.3 injections/hour</li><li>That’s ~13 samples/hour in typical phrasing</li><li>Over 24 hours: 13.3 × 24 = ~320 samples/day (continuous operation)</li></ul>If you run a single shift, just scale accordingly (e.g., ~106/day for an 8‑hour shift, excluding QC and overhead).</blockquote><h3>Performance summary</h3><h5>Sensitivity and linearity</h5><ul><li>Linearity from LOQs as low as 0.25 ng/mL up to 1,000 ng/mL (panel-dependent)</li><li>For THC specifically: LOQ at 1 ng/mL, with a dynamic range extending to 1,000 ng/mL in this evaluation</li><li>Across the panel, LOQs were reported as lower than recommended confirmation cutoffs referenced in SAMHSA guidance and NSC Tier 1 cutoffs (study-specific outcome)</li></ul><h5>Confirmation via ion ratios</h5><ul><li>Ion ratios evaluated using ±20% tolerance (typical confirmatory acceptance framework)</li><li>The workflow produced consistent ion ratios across calibrator levels for the full panel in this evaluation</li></ul><h5>Case sample comparison (real-world relevance)</h5>When compared against a validated triple quadrupole method for case study samples, the Stellar MS workflow:<ul><li>Confirmed the positive hits observed by the reference method</li><li>Reported a few additional positives for select analytes, attributed to lower LOQs</li><li>Highlighted an operational efficiency point: 1 µL injection in this method versus 20 µL injection in the compared method</li></ul><h3>FAQ</h3><div><div><ol><li>How long does the LC‑MS run take for the 31‑drug oral fluid panel? 4.5 minutes per injection using a short UHPLC gradient. &nbsp;</li><li>How many drugs of abuse can Stellar MS detect in this workflow? 31 drugs of abuse, including THC, using full scan + targeted MS2. &nbsp;</li><li>What MS/MS approach is used? A combined strategy: full scan plus targeted MS2 (tMS2) for confirmation. &nbsp;</li><li>Why use both HCD and CID? Because some analytes fragment better—and produce more stable confirmation ions/ion ratios—under one mode versus the other. Using both increases flexibility and speeds method optimization. &nbsp;</li><li>What injection volume is used? 1 µL of extracted sample. &nbsp;</li><li>What mobile phases are used? 0.1% formic acid in water (A) and 0.1% formic acid in methanol (B). &nbsp;</li><li>How many samples can you run per day? At 4.5 minutes/injection, throughput is ~13 samples/hour or up to ~320/day with continuous operation (actual throughput depends on QC and scheduling).</li></ol></div></div><h3>What makes this workflow “easy” to develop on Stellar MS</h3>Here’s the short list of features that directly reduce method‑development friction:<ul><li>HCD or CID in one method → optimize per compound, not compromise</li><li>Fast MS2 acquisition speeds (up to 140 Hz for MS2) → more data points across narrow peaks</li><li>Fast polarity switching (true 5 ms) → supports mixed panels efficiently</li><li>Adaptive RT (real‑time retention time window adjustment) → helps reduce reinjections when retention times drift (e.g., column aging) and supports method transfer from longer to shorter gradients</li><li>OptaMax Plus HESI source control → supports sensitivity at low injection volumes</li></ul>If you’re building a fast oral fluid confirmation workflow—or updating an existing DOA panel—this 4.5‑minute method shows how Stellar MS can combine speed, confirmation-ready MS2, and fragmentation flexibility (HCD + CID) in a single targeted workflow. Reach out to learn how to adapt the targeted list, collision settings, and scheduling strategy to your lab’s cutoffs and throughput goals.<blockquote>Visit us on&nbsp;<a target="_blank" rel="noopener noreferrer" href="https://www.linkedin.com/showcase/72003132/admin/dashboard/">LinkedIn:</a>&nbsp;#MassSpectrometry #OralFluid #DrugsOfAbuse #MethodDevelopment #HighThroughput</blockquote>

4.5-Minute Oral Fluid LC MS Method to Detect 31 Drugs of Abuse Using Stellar MS

<h2><a target="_blank" rel="noopener noreferrer" href="https://www.isc2026.org/">ISC 2026</a></h2>The <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/companies/314">International Symposium on Chromatography (ISC)</a> represents the oldest conference series on separation science. ISC symposia have been organised since 1956 in each even year. ISC is one of the premier meetings series for discussion of all modes of chromatography and separation science with a broad coverage of techniques and applications.<h4><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/events/644">35th International Symposium on Chromatography</a></h4>📆6. - 10. September 2026📍Prague, Czech Republic<h3>REGISTRATION</h3><blockquote>👉<a target="_blank" rel="noopener noreferrer" href="https://www.czech-in.org/cmPortalV15/Account/Login?ReturnUrl=%2FcmPortalV15%2FPortal%2FISC26%2Fnormal">Register HERE for the ISC 2026</a>Late Registration until 25 August 2026</blockquote><h3>INDUSTRY ACTIVITIES</h3><h4>Activity 1: Discussion Session: Industry &amp; Education</h4><ul><li>Monday, 7 September 2026 | 16:30-17:50</li><li>Place: Club A</li><li>Moderators: Tony Edge and Deirdre Cabooter&nbsp;</li></ul><h5>Concept:</h5>This discussion session will explore the relationship between education in separation science in academia and the expectations of industry, focusing on how universities and companies can better collaborate to prepare graduates for successful careers in analytical laboratories and R&amp;D environments. The goal of the session is to provide perspectives from both academia and industry on how education in chromatography and related separation techniques can evolve to better reflect current technological, methodological, and regulatory challenges.<h5>Discussion Topics:</h5><ul><li>Bridging academia and industry: how both sectors perceive current cooperation and where improvements are possible&nbsp;</li><li>Graduate preparedness: which skills and competencies are often missing when entering industrial roles, and in which areas graduates typically excel&nbsp;</li><li>Approaches to teaching separation science: how chromatography and related analytical techniques are taught across different universities and regions&nbsp;</li><li>Industry support for education: examples of collaboration such as internships, industrial placements, joint teaching activities, or access to instrumentation&nbsp;</li><li>Experiences with academia–industry partnerships: what models of cooperation have proven effective in practice&nbsp;</li><li>Future perspectives: how education in separation science should adapt to emerging trends such as automation, digitalization, sustainability, and regulatory requirements&nbsp;</li></ul><h5>Format:</h5>Moderated panel discussion with short introductory remarks from invited speakers representing both academia and industry, followed by an interactive discussion with the audience.<h5>Panelists:</h5><ul><li>Shimadzu&nbsp;</li><li>Novartis&nbsp;</li><li>Jelle De Vos, RIC Group&nbsp;</li><li>Davy Guillarme, University of Geneva&nbsp;</li><li>Caterina Temporini, University of Pavia&nbsp;</li></ul><h4>Activity 2: Career Presentation&nbsp;</h4><ul><li>Monday, 7 September 2026 | 18:00-19:00</li><li>Place: Club A</li><li>Moderators: Adrian Clarke and Martina Catani</li></ul><h5>Concept:</h5>This session will provide an overview of career opportunities in separation science across industry, highlighting the wide range of professional pathways available to graduates and experienced scientists working in chromatography and related analytical disciplines.Participating companies will introduce their organizations, present typical roles involving separation techniques, and share insights into the skills and competencies they seek in candidates. The session is intended to support students, early-career researchers, and experienced professionals interested in exploring career options in industry sectors.<h5>Discussion Topics:&nbsp;</h5><ul><li>Overview of career paths involving chromatography and separation science&nbsp;</li><li>Entry-level opportunities for graduates and PhD holders&nbsp;</li><li>Positions for experienced scientists and technical specialists&nbsp;</li><li>Roles in R&amp;D, analytical development, quality control, regulatory science, application support, and instrument development&nbsp;</li><li>Skills and competencies valued by employers in separation science&nbsp;</li><li>Internships, graduate programs, and early-career development opportunities&nbsp;</li><li>Mobility between academia and industry&nbsp;</li></ul><h5>Format:</h5>Short presentation providing:<ul><li>overview of different carrier paths&nbsp;</li><li>introduction to the company and its activities related to separation science&nbsp;</li><li>examples of typical roles and career progression paths&nbsp;</li><li>information about current or expected hiring needs&nbsp;</li><li>advice for candidates interested in pursuing careers in industry&nbsp;</li><li>the session should include time for informal discussion, allowing participants to interact with company representatives and learn more about specific opportunities.&nbsp;</li></ul><h4>Activity 3: Job Fair</h4><ul><li>Monday, 7 September and Tuesday, 8 September 2026 | 12:30-14:00</li><li>Place: Club A</li><li>Main organizer: Adrian Clarke</li></ul><h5>Concept:</h5>The ISC 2026 Job Fair provides a structured opportunity for direct interaction between companies active in separation science and conference participants seeking career opportunities. The session is designed to facilitate efficient, focused conversations between employers and candidates interested in positions related to chromatography and analytical science.Participating candidates will submit their CV in advance allowing companies to review profiles prior to the event and identify potential matches based on expertise, experience, and career interests.<h5>Format:</h5>The Job Fair will follow a structured rotation format:<ul><li>Each participating company will be assigned a dedicated table&nbsp;</li><li>One company representative will meet candidates individually&nbsp;</li><li>Each candidate will have 5 minutes per meeting to introduce their background and interests&nbsp;</li><li>Participants will rotate between companies at timed intervals&nbsp;</li><li>Session timing will be managed by the organizer, with a signal indicating when to move to the next meeting&nbsp;</li></ul><h5>Candidates:</h5>Participants interested in joining the Job Fair are asked to:<ul><li>submit their CV before August 23rd &nbsp;</li><li>indicate areas of expertise and career interests&nbsp;</li><li>specify whether they are seeking internships, entry-level roles, or experienced positions&nbsp;</li><li>specify if you cannot be available on a certain day e.g. owing to poster presentation&nbsp;</li><li>send these materials to: <a href="mailto:careers@isc2026.org">careers@isc2026.org</a>&nbsp;</li></ul><h5>Companies:</h5>Confirmed participating companies to date include:<ul><li>Novartis&nbsp;</li><li>RIC Group&nbsp;</li><li>Shimadzu&nbsp;</li><li>further companies to be added&nbsp;</li></ul>Potential employers please register your interest to <a href="mailto:careers@isc2026.org">careers@isc2026.org</a> to participate in the speed-dating (first come first served basis).“Jobs position” board will be available in the Careers fair in the foyer in the symposium venue and attendees can visit the company booths in the exhibition hall or discuss with recruiting companies during the conference.<blockquote>Recruiters please send an email with your open positions to <a href="careers@isc2026.org">careers@isc2026.org</a> by the 23rd August and bring the job adverts to post on the jobs board (there will also be the possibility to upload the open positions to the Symposium app).</blockquote><h4>Activity 4: Discussion Session: Artificial Intelligence in Separation Science: From Concept to Practice</h4><ul><li>Tuesday, 8 September 2026 | 16:30-18:00</li><li>Place: Club A</li><li>Moderators: Bob Pirok</li></ul><h5>Concept:</h5>Artificial intelligence (AI) and data-driven approaches are increasingly influencing analytical chemistry, offering new possibilities for method development, data interpretation, process optimization, and decision support. This discussion session will explore how AI is currently being applied in separation science, with a particular focus on practical implementation in industry environments.The session aims to provide a realistic overview of the current state of AI adoption, highlighting both successful applications and remaining challenges. Contributions from industry and academia will help clarify where AI already delivers value, where expectations may exceed current capabilities, and what developments are needed to enable broader implementation.<h5>Discussion Topics:&nbsp;</h5><ul><li>Current applications of AI and machine learning in separation science&nbsp;</li><li>Use of AI in chromatographic method development and optimization&nbsp;</li><li>Data analysis, peak detection, and automated interpretation of complex datasets&nbsp;</li><li>AI-supported troubleshooting and predictive maintenance of analytical instruments&nbsp;</li><li>Integration of AI into regulated environments (e.g., pharmaceutical industry)&nbsp;</li><li>Data requirements, data quality, and standardization challenges&nbsp;</li><li>Comparison between academic developments and real-world industrial implementation&nbsp;</li><li>Barriers to adoption, including regulatory considerations, validation requirements, and transparency of models&nbsp;</li><li>Future outlook: digital laboratories, autonomous method development, and AI-assisted decision-making in analytical workflows&nbsp;</li></ul><h5>Format:</h5>Moderated panel discussion with short introductory remarks from invited speakers representing both academia and industry, followed by an interactive discussion with the audience.<h4>Activity 5: Discussion Session: Sustainability in Separation Science</h4><ul><li>Wednesday, 9 September 2026 | 16:30-18:00</li><li>Place: Club A</li><li>Moderators: Gertrud Morlock</li></ul><h5>Concept:</h5>Sustainability has become an increasingly important priority in analytical science, driving the development of greener methods, reduced solvent consumption, improved energy efficiency, and more responsible laboratory practices. While academic research frequently proposes innovative sustainable approaches, their implementation in industry is often influenced by additional considerations such as robustness, regulatory compliance, cost efficiency, scalability, and long-term reliability.This discussion session aims to explore how sustainability principles are applied in real industrial environments and how collaboration between academia and industry can help translate promising research concepts into practical, validated solutions.By bringing together perspectives from both sectors, the session will highlight opportunities to better align research priorities with industrial needs and identify realistic pathways toward more sustainable separation workflows.<h5>Discussion Topics:&nbsp;</h5><ul><li>Reduction of solvent consumption and the transition to more environmentally friendly mobile phases&nbsp;</li><li>Miniaturized and more efficient separation and extraction techniques&nbsp;</li><li>Energy consumption and efficiency of laboratory processes and analytical instrumentation&nbsp;</li><li>Lifecycle considerations for columns, consumables, and laboratory waste&nbsp;</li><li>Metrics and approaches for measuring and evaluating the “greenness” of analytical methods&nbsp;</li><li>Regulatory constraints and requirements that may limit the implementation of greener analytical workflows&nbsp;</li></ul><h5>Format:</h5>Moderated panel discussion with short introductory contributions from invited speakers representing industry, academia, and technology providers, followed by interactive discussion with the audience.<h5>Panelists:</h5><ul><li>Sébastien Rolle, Shimadzu&nbsp;</li><li>Ken Cook, Thermo Fisher Scientific&nbsp;</li><li>Andreas Otto, Agilent&nbsp;</li><li>Janusz Pawliszyn, University of Waterloo&nbsp;</li><li>Giorgia Purcaro, University of Liège&nbsp;</li></ul>

Industry program at ISC 2026

We are delighted to invite food scientists from academia and industry, representatives of (inter)national agencies, control authorities, governmental and commercial laboratories to attend <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/events/928">RAFA 2026</a> (12th Symposium on Recent Advances in Food Analysis), that takes place 3–6 November 2026 in Prague..<blockquote>👉<a target="_blank" rel="noopener noreferrer" href="https://rafa.easyevent.eu/tickets/">SUBMIT ABSTRACT</a> FOR POSTER PRESENTATION by August 31, 2026Do not miss the opportunity to present your latest results at RAFA 2026.</blockquote><h5>Next deadlines:</h5><ul><li>August 31, 2026: 2nd window – &nbsp;<a target="_blank" rel="noopener noreferrer" href="https://www.rafa2026.eu/sponsors_exhibitors_media_partners_info.html">Application for participation as a Sponsor or Exhibitor</a></li><li>September 30, 2026:&nbsp;<ul><li><a target="_blank" rel="noopener noreferrer" href="https://www.rafa2026.eu/registration.html">Registration at the regular rate</a></li><li>Abstract submission – Last minute posters (May not appear in the RAFA 2026 program)</li></ul></li></ul>Since its first edition in 2003, RAFA has grown into a prestigious international event, typically welcoming up to 850 participants from more than 60 countries worldwide, with the support of more than 50 sponsors, exhibitors, media and supporting partners.RAFA 2026 will provide an overview of contemporary trends in the ANALYTICAL &amp; BIOANALYTICAL STRATEGIES IN FOOD QUALITY AND SAFETY CONTROL and discuss the CHALLENGES AND NOVEL APPROACHES IN FOOD AND NATURAL PRODUCTS ANALYSIS.View the <a target="_blank" rel="noopener noreferrer" href="https://www.rafa2026.eu/invited_speakers.html">list of distinguished speakers</a> who have accepted our invitation to RAFA 2026 and will present current hot topics and future perspectives in food analysis!<blockquote>👉More details on the <a target="_blank" rel="noopener noreferrer" href="https://www.rafa2026.eu/scientific_programme.html">RAFA 2026 preliminary program</a> can be found HERE.👉OUR <a target="_blank" rel="noopener noreferrer" href="https://www.rafa2026.eu/about_sponsors_exhibitors_partners.html">SPONSORS, EXHIBITORS, MEDIA and SUPPORTING PARTNERS</a></blockquote>You are kindly invited to join and contribute to our exciting scientific program and unforgettable social events!We look forward to meeting you again in Prague!<ul><li>Prof. Jana Pulkrabova &amp; Dr. Stefan van Leeuwen, Symposium Chairs</li><li>Prof. Michele Suman, Symposium Co-chair</li><li>Prof. Jana Hajslova &amp; Prof. Michel Nielen, Symposium Honorary Chairs</li></ul>

RAFA 2026 - Deadline for Abstract Submission for poster presentation is coming

Article

Product

Events

Application

Food

Video

RAFA provides an overview of contemporary trends in ANALYTICAL & BIOANALYTICAL STRATEGIES IN FOOD QUALITY AND SAFETY CONTROL and discusses CHALLENGES / NOVEL APPROACHES IN FOOD AND NATURAL PRODUCTS ANALYSIS.

Recent Advances in Food Analysis (RAFA)

A unique company dedicated to serving science helping our customers drive productivity and accelerate results. Through our premier brands – Thermo Scientific, Applied Biosystems, Invitrogen, Fisher Scientific and Unity Lab Services.

Thermo Fisher Scientific

The International Symposium on Chromatography (ISC) represents the oldest conference series focussing on separation science. ISC symposia have been organised since 1956 in each even year. ISC is internationally recognised as one of the premier meeting series for discussion of all modes of chromatography and separation science with a broad coverage of techniques and applications.

International Symposium on Chromatography - (ISC)

Tosoh Bioscience

Separation Science

Agilent Technologies

Technology Networks

MAC-MOD ANALYTICAL

Phenomenex

Waters Corporation

<h4>European Free Educational Webinar Series</h4>
Let&#39;s go back to the basics of Chromatography, Mass Spectrometry, Data Analysis and Trouble-shooting: understanding the importance of the basics will enable you to be more effective in your daily laboratory life.
<h4>EPISODE 5</h4>
Analytical Method Development
What will you learn?
<ul>
<li>How to choose the right Analytical Column Kit</li>
<li>Select the critical Parameters for your Analytical Methods</li>
</ul>
<blockquote>
Prezenter: Andrea Gheduzzi (Principal LC Market Dev. Manager, EMEA, Waters Corporation)
</blockquote>
<blockquote>
Andrea has spent more than 30 years in the chromatography field. Across his career he had various roles, service engineer, chromatography lab position, and technical application support manager. He has mainly been dealing with pharma accounts, also supporting LC method development activities using DoE/QbD approaches. In his role as Pharma Business Development Manager at Waters he has further expanded his expertise in AQbD and related applications.
</blockquote>
<blockquote>
Prezenter: Tobias Langrock (Senior Application Specialist Chemistry Europe, Waters)
</blockquote>
<blockquote>
During his time as a PhD student Tobias discovered his passion for LC and LC-MS/MS and has not lost it since. Joining Waters in 2008 was the perfect opportunity to expand his understanding and expertise in chromatography and mass spectrometry. Since then, he has been involved with a very wide range of instruments and applications, whether small or large molecules, reversed phase LC, IEX or SEC, SFC or GPC. His focus is always on the customers and their daily chromatographic challenges.
</blockquote>
<h4>What&#39;s next?</h4>
Full Webinar Series Episodes List is available <a href="https://event.on24.com/wcc/r/4551012/F69479929A905500D8B21508527807E5/5385652">here</a>
Back to Basics - Sample Preparation: Theory and Overview
<ul>
<li>Tuesday, May 07, 2024, 11:00 AM CEST</li>
</ul>
Back to Basics - Sample Preparation: Tips &amp; Tricks to make it simple
<ul>
<li>Wednesday, June 05, 2024, 11:00 AM CEST</li>
</ul>
Back to Basics - Theory of Liquid Chromatography
<ul>
<li>Wednesday, July 03, 2024, 11:00 AM CEST</li>
</ul>
Back to Basics - Basics of Liquid Chromatography
<ul>
<li>Tuesday, September 10, 2024, 11:00 AM CEST</li>
</ul>
Back to Basics - Analytical Method Development
<ul>
<li>Wednesday, October 02, 2024, 11:00 AM CEST</li>
</ul>
Back to Basics - The importance of Compliance
<ul>
<li>Tuesday, October 22, 2024, 11:00 AM CEST</li>
</ul>
Back to Basics - Introduction to Mass Spectrometry
<ul>
<li>Wednesday, November 13, 2024, 11:00 AM CET</li>
</ul>
Back to Basics - Troubleshooting your LC and MS Systems
<ul>
<li>Tuesday, December 10, 2024, 11:00 AM CET</li>
</ul>
Not sure to be able to attend live sessions?
Register today and watch the webinars on-demand

Waters Corporation: Back to Bacisc Free Educational Webinar Serries

Analytical Method Development

How to select analytical column kit and the critical parameters for your method.

Analytical Method Development (HPLC, LC/MS, columns)

Join us for an exclusive two-day event where Agilent will showcase cutting-edge biopharma solutions.
The first day of the event we will explore Agilent’s comprehensive portfolio for the spectrum of applications from drug discovery to quality control. Learn more about our cell analysis and genomics expertise and the tools we provide to drive IVT mRNA development, protein therapeutics and cell and gene therapies
The second day will focus on advanced analytical solutions, including HRMS for tRNA sequencing and LC/MS for DNA/RNA analysis. Learn how to scale up oligonucleotide purification with Agilent biocolumns, which enhance the efficiency and accuracy of your processes.
By attending this event you will:
<ul>
<li>Gain insights from Agilent to optimize biotherapeutic workflows, including rigorous quality testing in cGMP environments and handling nucleic acid, vaccines, mAB and protein samples.
</li>
<li>Understand how metabolic analyses can impact CAR cell function and behavior, using cytolytic cell killing assays on the xCELLigence system to develop cell therapy processes and confirm product potency.
</li>
<li>Learn about new techniques in high-resolution LC/MS for analyzing tRNA modifications.
</li>
<li>Discover software tools available for high-resolution MS systems in both research and QA/QC labs.
</li>
<li>Compare analytical and semipreparative LC purification methods for synthetic oligonucleotides, gaining competitive insights into purification strategies.
</li>
</ul>
<h5>Talk 1: Advanced Analytical Solutions for Nucleic Acid Analysis and Purification</h5>
<ul>
<li>Presented by Dr. Charlotte Lekieffre, Biopharma Application Specialist, Agilent Technologies</li>
</ul>
The emphasis during the second day of the Summit will be on advanced analytical solutions, such as HRMS for tRNA sequencing and LC/MS for DNA/RNA analysis. Additionally, you’ll discover techniques to enhance the efficiency and accuracy of your processes by scaling up oligonucleotide purification using Agilent biocolumns. 
<h5>Talk 2: Extracted Yeast tRNA Sequencing by LC-MS/MS</h5>
<ul>
<li>Presented by Aurore Attina, Engineer of Mass Spectrometry, University of Montpellier</li>
</ul>
RNA modifications are essential for RNA stability, maturation, and functionality; directly influencing protein translation and gene regulation. They play a central role in various biological processes and are associated with many diseases, including cancers and neurological disorders. tRNA (transfer RNA), which plays a key role in protein synthesis, is the most modified molecule in the organism known to date. tRNA modifications are essential to ensure their correct function in protein translation, maintain the accuracy and fidelity of the genetic code, and enable flexible adaptation to changing cellular conditions and are therefore a crucial attribute to monitor. To monitor and map these modifications of tRNA, we have developed a LC-HRMS analytical workflow, first using synthetic oligonucleotide for the method optimization. In this webinar, we will first go through the various steps involved in LC-MS/MS method optimization using synthetic oligonucleotides. In a second part, we will present the protocol development of an enzymatic digestion applied to tRNA extracted from yeast. This digestion generates oligonucleotide fragments that can be analyzed by LC-MS/MS for sequence confirmation.
<h5>Talk 3: Discover Agilent’s Software Tools to Confirm Oligonucleotide Sequence Integrity</h5>
<ul>
<li>Presented by Dr. Holger Stalz, LC/MS Product Specialist Austria &amp; Switzerland, Agilent Technologies</li>
</ul>
Mass spectrometry (MS) is increasingly important for the development of therapeutic modalities such as oligonucleotides. A common analytical method for large molecules is intact mass by LC/MS. This can be used for the characterization and identification of a product or process-related impurities, or simply as a confirmation of molecular weight. The newly introduced Agilent OpenLab CDS 2.8 SW version comes with a set of features to enable the automatization of biopharma workflows. If you want to know how LC/MSD Spectral Deconvolution of your biopharma samples can be automated, we will provide answers during our presentation. Even more details on Oligonucleotide sequence confirmation and impurities characterization can be acquired using the power of a high-resolution accurate mass system (HRAM) on the Agilent 6545XT AdvanceBio LC/Q-TOF. Analyzing the sample data with the software workflows in Agilent BioConfirm version 12 will support the user to get the trusted answers to their most relevant questions.
<h5>Talk 4 Maximize Your Resources and Simplify Scale-up with AdvanceBio Oligonucleotide Columns</h5>
<ul>
<li>Presented by Dr. Andrea Tripodi, Application Development Engineer, Agilent Technologies</li>
</ul>
Several classes of nucleic acids, such as antisense oligonucleotides, small interfering RNAs (siRNAs), and aptamers are being investigated for potential therapeutic applications. Synthetic oligonucleotides inevitably contain many impurities due to limitations in the efficiency of each chemical reaction used during manufacture. They include deletion sequences (missing one or more nucleotides) and reaction by-products often arising during the final deprotection or cleavage steps. Ion pair reversed-phase (IP-RP) chromatography stands out as the prevalent method for analyzing and purifying oligonucleotides. For increased resolution and separation of your full-length synthetic oligonucleotide from closely related impurities, AdvanceBio Oligonucleotide is the ideal choice. The latest developments include semi-preparative, and lab-scale preparative columns packed with superficially porous particles that provide excellent performance and resolution without compromising column loading. A fast and easy scale-up method from analytical to semi-preparative scale was successfully achieved using a 10 mm ID column enabling higher sample loading using the same analytical LC instrument.

Technology Networks: Biopharma Innovations Summit

Biopharma Innovations Summit Day 2

Learn more about our cell analysis and genomics expertise and the tools we provide to drive IVT mRNA development.

In this part of the course we will deal with sample preparation: why, how and which sample preparation is the most suitable for the target analyte?SPE, LLSE, or syringe filter?&nbsp;<blockquote>Presenter: Shaun Pritchard (Product Specialist Liquid Phase Separations, Agilent Technologies)Shaun Pritchard is a Product Specialist for separation products at Agilent Technologies covering the UK and Ireland. He started his career in 1989 working at a large Pharmaceutical company holding a number of roles, this is where he became passionate about HPLC finally in 1998 he took the leap to leave the lab and move to the commercial side of things and has had a number of roles within the industry until 2017 he joined Agilent.</blockquote>

Agilent Technologies: HPLC Beginner Webinar Series

Sample Preparation in HPLC

Why, how and which sample preparation is the most suitable for the target analyte?

This comprehensive webinar will equip you with the knowledge and skills needed to excel in N-glycan analysis, from sample preparation to data interpretation.Enhance your understanding of the latest tools Agilent offers to address your biotherapeutic characterization needs.<h4>By attending this webinar, you will:</h4><ul><li>Understand the significance of N-glycans &nbsp;</li><li>Learn about the latest N-glycan sample preparation techniques &nbsp;</li><li>Understand how to select the right columns and perform HILIC separations &nbsp;</li><li>Analyze data with the new Glycan Peak Assignment Tool</li></ul><blockquote>Presenter: Tom Rice (Bioconsumables Product Manager, Agilent Technologies)Tom Rice is the Bioconsumables Product Manager at Agilent Technologies, coming to Agilent through the acquisition of ProZyme in 2018. Prior to joining Agilent, he held various sales and marketing roles within ProZyme beginning in 2014. Much of Tom’s work, both at ProZyme and Agilent, has been focused on bringing innovative glycobiology solutions to biopharma customers. Tom is based in California and holds a B.S. from Sonoma State University.Presenter:&nbsp;Randall Robinson (Research and Development Scientist, Chemistries and Supplies Division at Agilent Technologies)Randall Robinson is a Research and Development Scientist in the Chemistries and Supplies Division at Agilent. Prior to joining Agilent in 2021, Randall completed his PhD in food chemistry with a focus on developing analytical techniques to characterize bioactive oligosaccharides in milk and dairy streams. Since joining Agilent, he has contributed to the design of numerous products utilized for N-glycan analysis, including the HILIC column described in this presentation.</blockquote>

Separation Science: Streamlining N-Glycan Analysis: A Complete Workflow from Agilent

Streamlining N-Glycan Analysis: A Complete Workflow from Agilent

Learn about the latest N-Glycan sample preparation techniques.

Streamlining N-Glycan Analysis: A Complete Workflow

PFAS testing has become one of the most important topics facing food and environmental laboratories over the last two years.&nbsp;Phenomenex and SCIEX have worked with collaborators to overcome the significant challenges of such analyses, and now offer extremely sensitive and robust LC-MS/MS and sample preparation solutions, with methods and software which are ready to implement.<h4>Key Learning Points</h4><ul><li>Background to PFAS and their regulations</li><li>System Settings and requirements</li><li>Correct HPLC column choice</li><li>Sample Preparation strategies from various matrices</li><li>PFAS as ubiquitous contaminants - Inerting the system</li><li>A sensitive and robust method applicable to water and food sample</li><li>Some insight about designed for PFAS products</li></ul><h4>Who should attend</h4><ul><li>LC/MS or Sample Prep Users, working with several matrices that want to get tips on PFAS method development or on improving their method.</li></ul><blockquote>Presenter: Jianru Stahl-Zeng, Dr.&nbsp; (Senior Technical Marketing Manager EMEAI, SCIEX)Jianru has been part of SCIEX since 2001. She initially was part of our application Support team and covered not only proteomics but also small molecules applications. Jianru moved to technical marketing and focused on Food and Environmental applications.Since 2018, she is managing the EMEAI technical marketing team and projects. Jianru is also the Global Technical Leader for Food and &nbsp;Environmental application.Presenter:&nbsp;Duilio Romanello (Senior Technical Specialist, Phenomenex)Duilio has been working with Phenomenex since 2008. Since 2010 he has been Product Specialist for the GC and SPE lines and then Account Manager for the South of Italy. Since November 2023 he is covering the role of Senior Technical Specialist.He has acquired experience in the Food and Environmental sectors by collaborating with important companies in the industry and providing technical support for the development of method optimization, guidance on applications and troubleshooting, assistance in choosing columns for HPLC, Gas Chromatography (GC), SFC and SPE.</blockquote>

Phenomenex: Advanced strategies in LC/MS/MS for the clean-up and the analysis of per- and polyfluoroalkyl substances (PFAS) in various matrices

Advanced strategies in LC/MS/MS for the clean-up and the analysis of per- and polyfluoroalkyl substances (PFAS) in various matrices

Extremely sensitive and robust LC-MS/MS and sample preparation solutions, with methods and software which are ready to implement.

Advanced strategies in LC/MS/MS for the clean-up

With an understanding of selectivity, and using a variety of chromatographic data, we discuss phase design principles and how it is possible to introduce functionality to enhance selectivity through different mechanisms such as hydrophobicity, π-π, dipole-dipole and shape selectivity interactions.This webinar is the second part in a three-part series by Gemma Lo, called "A Systematic UHPLC / HPLC Method Development Strategy with Complementary Stationary Phases to Maximize Selectivity and Resolution."Each part is about 20min long.Presenter: Gemma Lo

MAC MOD Analytical: Utilizing Stationary Phase Design in Method Development

Utilizing Stationary Phase Design in Method Development

We discuss phase design principles and how it is possible to introduce functionality to enhance selectivity through different mechanisms.

<h5>Who Should Attend:</h5><ul><li>Any HPLC scientists beginning with method development&nbsp;or working with small molecules in pharmaceutical labs &nbsp;</li></ul><h5>Key Learning Points:</h5><ul><li>Learn about selectivity benefits of phenyl phases during reversed-phase HPLC</li><li>Review mobile-phase optimization when using a phenyl column</li><li>Examine a thorough comparison of different phenyl phases with a C18 phase</li></ul><blockquote>Presenter: Zachary Woodward (Senior Technical Specialist, Phenomenex)Zachary Woodward is a Senior Technical Specialist with Phenomenex, Inc, assisting laboratories with method development in the bio-pharma, environmental, and food industries. &nbsp;Zachary spent his formative years developing HPLC and GC methods with a pharmaceutical lab in Albany, NY, after which he developed HPLC and SPE methods in the clinical setting here in Southern California. &nbsp;Zachary received his B.Sci. in Chemistry from the College of William and Mary, was awarded his Master’s in Chemistry at San Diego State University, and is happy to speak with you today!</blockquote>

How to Choose a Phenyl Phase

Learn about selectivity benefits of phenyl phases during reversed-phase HPLC. Review mobile-phase optimization when using a phenyl column.

Christian Rohrer, Director Sales and Support at Tosoh Bioscience GmbH, will present the next edition of Tosoh Tuesday, a webinar series held by Chromatography Experts.&nbsp;Analytical scientists are faced with the task of finding the right column from an almost unmanageable range of products. On Tuesday, October 22, Andrea Krumm, Product Manager Analytical Columns at Tosoh Bioscience, will focus on columns that enable protein analysis under native conditions through size exclusion, hydrophobic interaction and ion exchange chromatography. We will highlight the different column characteristics (pore size, particle size, base matrices, column dimensions, ligands) and which questions will help you decide which columns to use.After the webinar, ask your questions during the live Q&amp;A session.<blockquote>Presenter: Andrea Krumm (Product Manager Analytical Columns at Tosoh Bioscience)</blockquote>

Tosoh Bioscience: How to select (U)HPLC columns for protein analysis?

How to select (U)HPLC columns for protein analysis?

Columns that enable protein analysis under native conditions through size exclusion, hydrophobic interaction and ion exchange chromatography

Overview:<ul><li>Automated clean-up using solid-phase extraction for per- and polyfluorinated alkyl substances (PFAS) (presented by Norina Aßhoff/CVUA-MEL).</li><li>PFAS method according to LOD / LOQ limits in Recommendation (EU) 2022/1431 on the monitoring of perfluoroalkyl substances in food.</li><li>In fruit, vegetables &amp; baby food: limits for PFOS: 2 ng/kg, PFOA: 1 ng/kg, PFNA: 1 ng/kg, and PFHxS: 4 ng/kg.</li><li>Validated method for animal-based foods such as eggs, milk, meat and fish.</li><li>Suitability for PFAS analysis of food contact materials made of paper.</li><li>2-SPE cartridge setup (Strata GCB 250mg + Strata-X-AW 100mg) vs. single/stacked cartridge Strata PFAS (250mg / 100mg).</li></ul>Key Learning Points:<ul><li>Automated sample preparation of PFAS in food, food contact materials and consumer goods.</li><li>Additional sample preparation and LC-MS/MS methods for water, soil, and blood/serum.</li><li>Blank value-reduced SPE materials and other specific laboratory accessories for PFAS analysis.</li><li>Optimization of LC-MS/MS analysis through modern columns and strategies for better retention of short-chain PFAS.</li></ul>Who should attend?The webinar is designed for all involved in PFAS analysis in the food, feed, environmental and clinical areas, to learn about automation and new ideas for more robust PFAS methods.<blockquote>Presenter: Norina Aßhoff, CVUA-MELPresenter: Guido Rimmel, Account Manager, PhenomenexPresenter: Georg Pfefferer, Account Manager, Phenomenex</blockquote>Please note: the webinar on PFAS will not be recorded.

Phenomenex: PFAS Analysis in Food, Vegetables and Other Matrices – Automation, Hints & Developments

PFAS Analysis in Food, Vegetables and Other Matrices – Automation, Hints & Developments

Learn about automation and new ideas for more robust PFAS methods. 

PFAS Analysis in Food, Vegetables and Other Matrices

Choosing the appropriate column for your polymer analysis can be a challenge. Gel Permeation Chromatography (GPC) and Size Exclusion Chromatography (SEC) are separation techniques often used for polymers to determine the molecular weight and molecular weight distribution. &nbsp;Whether working with organic or aqueous mobile phase conditions, there are numerous factors and criteria to consider beyond the MW range when selecting the ideal GPC or SEC column.These include:<ul><li>individual pore, MIXED, and multiporous packing features and benefits</li><li>particle and pore size considerations&nbsp;</li><li>column chemistries and polymer sample types</li></ul> Additionally, we will cover best practices for selecting solvents, choosing calibration standards, and for using columns together in series. Application examples will be given. With a diverse range of column options available, we will demonstrate how to maximize performance through your GPC/SEC column selection<blockquote>Presenter: Jean Lane (Application Engineer, Agilent Technologies, Inc.)Jean has been employed with Agilent since Nov 2010 in technical and applications support and has a primary role supporting Agilent’s full line of LC columns and consumables, which also includes support for Agilent’s GPC/SEC product line. She came to Agilent thru acquisition of Varian and the former Polymer Laboratories. Jean has 20 plus years of technical and applications support for both HPLC and GPC consumable products. In addition to practical chromatography experience in the laboratory, she has had many, many years in her technical role involving customer support providing assistance and troubleshooting for customer chromatography issues.</blockquote>

Agilent Technologies: Becoming a Better Chromatographer - Educational Webinar Series

Optimize Your Polymer Analysis by Selecting the Ideal GPC/SEC Column

GPC & SEC are separation techniques often used for polymers to determine the molecular weight and molecular weight distribution.

LCMS webinars focusing on Consumables - page 12