EU Regulation 396/2005: Pesticide Residue Testing and the Critical Role of QuEChERS Evaporation in Food Safety

<div><div>Researchers led by <a target="_blank" rel="noopener noreferrer" href="https://kudova.group.uochb.cz/en">Eva Kudová</a> from IOCB Prague and Jitka Viktorová from UCT Prague have identified new androstane-based steroid derivatives that can significantly improve the effectiveness of existing antibiotics against multidrug-resistant Staphylococcus aureus.</div></div><div>The team screened dozens of natural steroidal hormones and synthetic derivatives to see whether they could block bacterial efflux pumps – mechanisms that bacteria use to eject antibiotics and survive treatment. Two compounds emerged as particularly promising: they inhibited efflux pumps and lowered the effective doses of antibiotics such as ciprofloxacin and erythromycin.Further analysis showed that one of the compounds also suppressed genes linked to bacterial virulence. Another key finding is that the most active molecules are non-toxic to human immune cells and showed no detectable endocrine activity, suggesting a favorable safety profile.These findings support the idea that rationally designed steroid-based molecules could act as antibiotic adjuvants, helping existing drugs overcome bacterial resistance.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/IOCB_Prague_Steroidal_hormones_and_neurosteroids_novel_therapeutic_strategies_in_bacterial_infections_8e5d2a7b48.jpg" alt="IOCB Prague: Steroidal hormones and neurosteroids – novel therapeutic strategies in bacterial infections" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_IOCB_Prague_Steroidal_hormones_and_neurosteroids_novel_therapeutic_strategies_in_bacterial_infections_8e5d2a7b48.jpg 222w," sizes="100vw" width="1258" height="886"><blockquote><h4>Original Article</h4><h4><a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0223523426001613?via%3Dihub">Steroidal hormones and neurosteroids - novel therapeutic strategies in bacterial infections: Design, synthesis, and biological evaluation</a></h4>Daniela Brdová, Bára Křížkovská, Jan Špaček, Zdeněk Míchal, Eva Jablonská, Ondřej Strnad, Hana Chodounská, Eszter Szánti-Pintér, Marina Morozovová, Václav Hanžl, Jan Tkadlec, Martijn Riool, Jan Lipov, Jitka Viktorová, Eva Kudová&nbsp;Eur. J. Med. Chem., 2026, 308, 118716<a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1016/j.ejmech.2026.118716">https://doi.org/10.1016/j.ejmech.2026.118716</a><h6>licensed under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/">CC-BY 4.0</a></h6></blockquote><h4>Abstract</h4>The global rise of antibiotic resistance necessitates novel therapeutic strategies for infectious diseases. Inhibition of bacterial efflux pumps, which contribute to multidrug resistance, represents a promising approach to restore or even increase the efficacy of existing antibiotics. Using fluorescence-based ethidium bromide accumulation, broth microdilution, and checkerboard assays, we evaluated 26 endogenous steroidal hormones and neurosteroids, along with 30 synthetic derivatives, for their ability to enhance antibiotic susceptibility in multidrug-resistant Staphylococcus aureus. Structure-activity relationship analysis identified compounds 13 and 16 as lead candidates, exhibiting strong efflux pump inhibition and marked reductions in the minimum inhibitory concentrations of ciprofloxacin and erythromycin. Both compounds showed additive effects in checkerboard assays. Modifications at C-3 (polar substitution) and C-17 (3α,5β-stereochemistry and nonpolar substitution) were essential for potent efflux inhibition and sensitization, although these modifications were not additive when combined. Transcriptome analysis further revealed that compound 13 significantly downregulated S. aureus virulence-associated genes when administered alone or in combination with antibiotics. Cytotoxicity assessment in human peripheral blood mononuclear cells and receptor transactivation assays for estrogen, androgen, and progesterone receptors indicated that the most active derivatives were non-toxic and lacked detectable endocrine activity, suggesting a favorable safety profile. Overall, these findings support the concept that rationally designed andostane-based steroidal scaffolds can function as competitive bacterial efflux pump inhibitors and serve as potential antibiotic adjuvants to mitigate efflux-mediated resistance.<h4>Instrumentation</h4><h5>Structural characterization</h5><ul><li>AVANCE III 400 MHz NMR spectrometer (Bruker)</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=3&amp;search=LTQ+Orbitrap+XL">LTQ Orbitrap XL HRMS</a> (Thermo Fisher Scientific, ESI)</li></ul></div>

Steroidal hormones and neurosteroids – novel therapeutic strategies in bacterial infections

Metformin is currently the first-line oral drug of choice for the treatment of type 2 diabetes. It reduces glucose production in the liver, improves tissue sensitivity to insulin, and does not cause weight gain or hypoglycemia, which sets it apart from some other antidiabetic drugs. Moreover, its long-term beneficial effects on the risk of cardiovascular complications and mortality in people with type 2 diabetes have been well established. Researchers from the Institute of Physiology CAS (IPHYS) have identified a new group of blood metabolites that could help physicians objectively monitor whether patients with type 2 diabetes are taking their metformin as prescribed.<h4>New biomarkers for metformin use</h4>A team led by Tomáš Čajka from the Laboratory of Translational Metabolism at IPHYS analyzed plasma samples from 637 patients with type 2 diabetes treated with metformin and 143 non-diabetic controls using advanced metabolomics and lipidomics. Among 614 detected metabolites, they identified five from the group of N-lactoyl-amino acids (e.g. N‑lactoyl-phenylalanine), which had previously been seen as unknown signals due to missing reference spectra in databases. The levels of these metabolites in the blood closely reflected the plasma concentrations of metformin. In patients with the highest metformin exposure, the concentrations of these metabolites were up to 7.2 times higher than in controls.<h4>A sensitive “fingerprint” of the drug’s effect</h4>N-Lactoyl-amino acids are formed in cells by combining lactate and amino acids, thus reflecting the metformin-induced changes in cellular energy metabolism. “Importantly, even though they occur in plasma only at nanomolar concentrations, they reliably distinguish patients who take metformin regularly from those who take it irregularly or not at all,” emphasizes T. Čajka.<h4>Metabolomics in practice and international collaboration</h4>The study also provides a detailed description of broader metabolic changes in type 2 diabetes, including increases in lactate, organic acids, and branched-chain amino acids, as well as extensive remodelling of the lipid profile. In addition to T. Čajka’s team, collaborators from the Institute for Clinical and Experimental Medicine in Prague and the West Coast Metabolomics Center (University of California, Davis) also participated in the study.The results demonstrate that advanced metabolomics approaches developed at IPHYS within the CarDia project can find highly practical applications both in clinical studies and in personalized monitoring of treatment in patients with diabetes.<blockquote><h4>The original article</h4><h4><a target="_blank" rel="noopener noreferrer" href="https://ascpt.onlinelibrary.wiley.com/doi/10.1002/cpt.70205">Untargeted Metabolomics Identifies N-Lactoyl-Amino Acids as Dose-Responsive Plasma Biomarkers of Metformin Adherence in Type 2 Diabetes</a></h4>Tomas Cajka, Jiri Hricko, Lucie Rudl Kulhava, Michaela Paucova, Michaela Novakova, Veronika Hola, Stanislava Rakusanova, Oliver Fiehn, Vojtech Skop, Ivana Lankova, Iva Miskova, Terezie Pelikanova, Martin HaluzikClin Pharmacol Ther, 119: 1057-1069<a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1002/cpt.70205">https://doi.org/10.1002/cpt.70205</a><h6>licensed under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/">CC-BY 4.0</a></h6></blockquote><h4>Abstract</h4>Metformin is the most widely prescribed antidiabetic drug, yet adherence remains difficult to objectively assess. Using untargeted metabolomics and lipidomics, we analyzed plasma from 637 patients with type 2 diabetes (T2D) with confirmed metformin use and 143 nondiabetic controls, annotating 614 metabolites. Patients were stratified by plasma metformin into sub-therapeutic, therapeutic, and supra-therapeutic groups, and associations were evaluated by multiple linear regression and composite metabolite ranking. Five previously unannotated features were structurally identified as N-lactoyl-amino acids, whose levels correlated strongly with plasma metformin (ρ = 0.42–0.55, P &lt; 0.0001) and increased up to 7.2-fold in the supra-therapeutic group (&gt; 2000 ng/mL). While N-lactoyl-amino acids were consistently detected in the nanomolar range, they still displayed robust and dose-dependent associations with metformin. Broader metabolic changes in T2D included elevated lactate, organic acids, and branched-chain amino acids, together with reduced urea cycle metabolites. Lipidomics showed increases in saturated triacylglycerols and diacylglycerols and decreases in cholesteryl esters, sphingomyelins, and phospholipids. These findings establish N-lactoyl-amino acids as robust, dose-responsive plasma biomarkers of metformin exposure. Despite being up to four orders of magnitude less abundant than their amino acid precursors, they sensitively reflect mitochondrial lactate overflow and pharmacodynamic adaptation, offering objective assessment of adherence.

New blood biomarkers reveal how faithfully diabetes patients take metformin

Article

Product

Environment

Food

Health

Scientific article

Science and research

Laboratories

The Czech Academy of Sciences (CAS) was established by Act No. 283/1992 Coll. as the Czech successor of the former Czechoslovak Academy of Sciences. It is set up as a complex of 54 public research institutions.

Czech Academy of Sciences

The Institute of Organic Chemistry and Biochemistry of the Czech Academy of Sciences (IOCB Prague) is a leading scientific institution in the Czech Republic, recognized internationally. Its primary mission is basic research in the fields of chemical biology and medicinal chemistry, organic and material oriented chemistry, chemistry of natural compounds, biochemistry and molecular biology, physical chemistry, theoretical chemistry, and analytical chemistry. 

Institute of Organic Chemistry and Biochemistry of the Czech Academy of Sciences

Organomation, founded in 1959, designs and manufactures high-quality nitrogen evaporators and extraction systems. Known for innovation and durability, their lab instruments are used globally for efficient sample preparation with strong customer support.

Organomation

KNAUER Eurospher II 100 C8 & C8A (U)HPLC Columns (USP L7)

C8 is a silica gel based stationary phase in reversed phase mode with alternative selectivity compared to C18 phases. 

Classical and hydrophilic/aqueous C8 columns for HPLC and UHPLC (USP L7)C8 is a silica gel based stationary phase in reversed phase mode with alternative selectivity compared to C18 phases. Compared to C18 phases, these columns show less retention due to the lower hydrophobicity.<ul><li>Ultra pure, spherical high performance HPLC phase based on silica gel</li><li>Monomeric C8 (Octyl) modification, standard endcapping, with 10 % carbon content (~ 50 % endcapping)</li></ul><h5>Properties</h5><ul><li>Separation mechanism: Hydrophobic interaction(lower compared to C18 phases)</li></ul><h5>Key features</h5><ul><li>Classical C8 phase, standard 50 % endcapping and 10 % carbon load, outstanding mechanical and chemical stability, suited for analytical as well as semi preparative and preparative applications.</li></ul><h5>Recommended application areas</h5><ul><li>Similar selectivity to C18 phase but less retention due to the lower hydrophobicity; useful for determination of:<ul><li>Water soluble vitamins</li><li>Steroids</li><li>Catecholamines</li><li>Sedatives</li></ul></li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_C8_rp_non_endcapped_3f7727d3fd.webp" alt="KNAUER: C8 RP Non-endcapped" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_C8_rp_non_endcapped_3f7727d3fd.webp 148w," sizes="100vw" width="304" height="321">Hydrophilic C8A phase offers an alternative, more polar selectivity. It is suited for highly polar reversed phase applications with up to 100 % aqueous mobile phases.&nbsp;<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_C8_A_e1f371165e.webp" alt="KNAUER: C8A" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_C8_A_e1f371165e.webp 198w," sizes="100vw" width="473" height="373"><blockquote>Tip: Caution! Even for short term storage all buffer solutions have to be rinsed from the column to prevent crystallization effects.</blockquote>Stationary phases Eurospher II 100 C8 and C8A are provided in these column types: analytical, semi-preparative and preparative.Eurospher II 100 C8 and C8A Analytical Columns are available with these parameters:<ul><li>Column length (mm): 50, 100, 150, 250</li><li>Column ID (mm): 2, 3, 4, 4.6</li><li>Particle size (µm): 2, 3, 5</li></ul>Eurospher II 100 C8 and C8A Semi-Preparative Standard Columns are available with these parameters:<ul><li>Column length (mm): 30, 50, 125, 150, 250</li><li>Column ID (mm): 8, 16</li><li>Particle size (µm): 5, 10</li></ul><h3>KNAUER (U)HPLC Columns</h3>Widest range of HPLC and UHPLC columns for all separation modes and applications.<ul><li>Safe Investment: Robust and reliable columns for attractive price&nbsp;</li><li>Separation Mode: Reversed Phase, HILIC, Normale</li><li>Simplicity: Easy purchase via our online store with fast delivery</li><li>Application: All-rounder for research or highly specialised for high-throughput analysis? We have the best column for your requirements.</li><li>Flexibility: Wide selection of column and particle sizes, for (U)HPLC applications up to 1000 bar</li></ul>KNAUER offers the perfect column for any small molecule separation. No matter which separation mode, molecule and the mobile phase, we offer a suitable (U)HPLC stationary phase. Choose from a wide range of modifications, particle sizes and column dimensions to suit your application. To elongate the lifetime of your column, you can choose to use a suitable precolumn.<figure class="image"><img style="aspect-ratio:787/674;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_KNAUER_U_HPLC_C8_and_C8_A_Columns_083c60f401.webp" alt="KNAUER: KNAUER (U)HPLC Columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_KNAUER_U_HPLC_C8_and_C8_A_Columns_083c60f401.webp 182w," sizes="100vw" width="787" height="674"></figure>

KNAUER Eurospher II 100 C18 (U)HPLC Columns (USP L1)

Stationary phase Eurospher II 100 C18 (U)HPLC is the most often used stationary phase in reversed phase mode

Classical Reversed Phase columns for HPLC and UHPLC (USP L1)Most often used stationary phase in reversed phase mode. Silica gel based columns with C18 modification are available with or without endcapping. Classically endcapped phases are slightly more hydrophobic and unpolar than the not endcapped phases.<h5>Properties</h5><ul><li>Separation mechanism: Hydrophobic interaction</li><li>Ultra pure, spherical high performance HPLC phase based on silica gel</li><li>Unpolar, monomeric C18 (Octadecyl) modification, endcapped, with 16 % carbon content (~ 50 % endcapping).</li></ul><h5>Key features</h5><ul><li>High-class HPLC phase perfectly suited to take on routine analyses as well as the most ambitious chromatography tasks, classical C18 phase with ca. 50 % endcapping and resulting 16 % carbon content, outstanding mechanical and chemical stability.</li></ul><h5>Recommended application areas</h5><ul><li>acidic, basic and neutral analytes in reversed phase mode, for example sulphonamides</li><li>anabolic steroids</li><li>anti-psychotics</li><li>beta blocker</li><li>sudan dyes</li><li>phenols and preservatives</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_C18_non_endcapped_6e4fce9989.webp" alt="KNAUER: C18 Non-endcapped" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_C18_non_endcapped_6e4fce9989.webp 245w," sizes="100vw" width="682" height="420"><blockquote>Tip: Caution! Never use classical C18 phases with 100 % aqueous mobile phase. The hydrophobic C18 chains will collapse</blockquote>Stationary phase Eurospher II 100 C18 is provided in these column types: analytical, semi-preparative and preparative.Eurospher II 100 C18 Analytical Columns are available with these parameters:<ul><li>Column length (mm): 50, 100, 150, 250</li><li>Column ID (mm): 2, 3, 4, 4.6</li><li>Particle size (µm): 2, 3, 5</li></ul>Eurospher II 100 C18 Semi-Preparative Standard Columns are available with these parameters:<ul><li>Column length (mm): 30, 50, 125, 150, 250</li><li>Column ID (mm): 8, 16</li><li>Particle size (µm): 5, 10</li></ul><h3>KNAUER (U)HPLC Columns</h3>Widest range of HPLC and UHPLC columns for all separation modes and applications.<ul><li>Safe Investment: Robust and reliable columns for attractive price&nbsp;</li><li>Separation Mode: Reversed Phase, HILIC, Normale</li><li>Simplicity: Easy purchase via our online store with fast delivery</li><li>Application: All-rounder for research or highly specialised for high-throughput analysis? We have the best column for your requirements.</li><li>Flexibility: Wide selection of column and particle sizes, for (U)HPLC applications up to 1000 bar</li></ul>KNAUER offers the perfect column for any small molecule separation. No matter which separation mode, molecule and the mobile phase, we offer a suitable (U)HPLC stationary phase. Choose from a wide range of modifications, particle sizes and column dimensions to suit your application. To elongate the lifetime of your column, you can choose to use a suitable precolumn.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_KNAUER_U_HPLC_C8_and_C8_A_Columns_083c60f401.webp" alt="KNAUER: KNAUER (U)HPLC Columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_KNAUER_U_HPLC_C8_and_C8_A_Columns_083c60f401.webp 182w," sizes="100vw" width="787" height="674">

KNAUER Eurospher II 100 C18A (U)HPLC Columns (USP L1)

C18A phases can be operated under 100 % aqueous conditions without destroying the stationary phase, what is not recommended for classical C18 phases

C18A columns for polar reversed phase applications with 100 % aqueous mobile phase (USP L1)C18 stationary phase for the analysis of more polar and hydrophilic compounds in reversed phase mode (USP L1). Silica gel based columns with C18 modification with hydrophilic endcapping. Because of their modification, C18A phases can be operated under 100 % aqueous conditions without destroying the stationary phase, what is not recommended for classical C18 phases caused by their hydrophobicity.<h5>Properties</h5><ul><li>Separation mechanism: Hydrophobic and polar interaction</li><li>Ultra pure, spherical high performance HPLC phase based on silica gel</li><li>Polar, monomeric C18 (Octadecyl) modification, polar endcapping, with 10 % carbon content (~ 50 % endcapping).</li></ul><h5>Key features</h5><ul><li>C18 A phase with alternative, more polar selectivity, suited for the use with pure aqueous mobile phases, 50 % endcapping and resulting 10 % carbon content, outstanding mechanical and chemical stability, suited for analytical as well as semi preparative and preparative applications</li></ul><h5>Recommended application areas</h5><ul><li>Polar endcapped C18 phase for water soluble and polar analytes, 100 % aqueous eluents for analysis of very polar compounds:<ul><li>basic pharmaceutical ingredients</li><li>water soluble vitamins</li><li>catecholamines</li><li>as well as organic acids.</li></ul></li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_C18_A_6f4b0c3063.webp" alt="KNAUER: C18A" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_C18_A_6f4b0c3063.webp 245w," sizes="100vw" width="690" height="428"><blockquote>Tip: With an endcapping the influence of nonderivatized silanol groups can be minimized. The endcapping reagent is generally a smaller silane than used for derivatisation. This treatment reduces the unwanted interaction of polar or charged analytes (acids, bases ect.) because the amount of available silanol groups is reduced.</blockquote>Stationary phase Eurospher II 100 C18A is provided in these column types: analytical, semi-preparative and preparative.Eurospher II 100 C18A Analytical Columns are available with these parameters:<ul><li>Column length (mm): 50, 100, 150, 250</li><li>Column ID (mm): 2, 3, 4, 4.6</li><li>Particle size (µm): 2, 3, 5</li></ul>Eurospher II 100 C18A Semi-Preparative Standard Columns are available with these parameters:<ul><li>Column length (mm): 30, 50, 125, 150, 250</li><li>Column ID (mm): 8, 16</li><li>Particle size (µm): 5, 10</li></ul><h3>KNAUER (U)HPLC Columns</h3>Widest range of HPLC and UHPLC columns for all separation modes and applications.<ul><li>Safe Investment: Robust and reliable columns for attractive price&nbsp;</li><li>Separation Mode: Reversed Phase, HILIC, Normale</li><li>Simplicity: Easy purchase via our online store with fast delivery</li><li>Application: All-rounder for research or highly specialised for high-throughput analysis? We have the best column for your requirements.</li><li>Flexibility: Wide selection of column and particle sizes, for (U)HPLC applications up to 1000 bar</li></ul>KNAUER offers the perfect column for any small molecule separation. No matter which separation mode, molecule and the mobile phase, we offer a suitable (U)HPLC stationary phase. Choose from a wide range of modifications, particle sizes and column dimensions to suit your application. To elongate the lifetime of your column, you can choose to use a suitable precolumn.<figure class="image"><img style="aspect-ratio:787/674;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_KNAUER_U_HPLC_C8_and_C8_A_Columns_083c60f401.webp" alt="KNAUER: KNAUER (U)HPLC Columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_KNAUER_U_HPLC_C8_and_C8_A_Columns_083c60f401.webp 182w," sizes="100vw" width="787" height="674"></figure>

KNAUER Eurokat H Ion Exclusion/Ligand Exchange Columns (USP L17)

The Eurokat H ionic form is especially designed for the analysis of organic acids and even complex mixtures of acids, sugars and alcohols as well as sugar alcohols.

Organic acids and alcoholsThe Eurokat H ionic form is especially designed for the analysis of organic acids and even complex mixtures of acids, sugars and alcohols as well as sugar alcohols. It is a cation exchange material with 8 % cross linkage of the styrenedivinylbenzene copolymer. Best results are acieved with aqueous eluents and small amounts of anorganic acids, recommended eluent 0.005 M sulfuric acid. The usage of up to 10 % organic content in the mobile phase is possible.<h5>Properties</h5><ul><li>Sulfonated cross-linked styrenedivinylbenzene copolymer phase for the determination of organic acids, carbohydrates and alcohols</li><li>H-form, 8 % cross linkage</li><li>Cation exchanger, extremly long lasting lifetime when correctly handled, best results with aqueous eluents and small amounts of anorganic acids, recommended eluent 0,01 N sulfuric acid, usage of up to 10 % organic content in the mobile phase is possible</li></ul><h5>Technical Data</h5><ul><li>Sulfonated cross-linked styrenedivinylbenzene copolymer with 8 % cross linkage in the ionic form H, available in 10 μm particle size, pressure stable up to maximum 100 bar</li></ul><h5>Recommended application areas</h5><ul><li>Eurokat H is especially designed for the analysis of organic acids and even complex mixtures of acids, sugars and alcohols as well as sugar alcohols. Due to a differing separation process we recommend the use of these type of columns only in 8 mm ID or 4 mm ID.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Eurokat_H_Chromatogram_e2c6665a1f.webp" alt="KNAUER: Eurokat H Chromatogram" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Eurokat_H_Chromatogram_e2c6665a1f.webp 245w," sizes="100vw" width="690" height="281"><blockquote>Tip: Eurokat columns are characterized by an extremely long lifetime if handled properly. Especially pressure shocks and organic solvent contents of more than 10 % in the mobile phase should be avoided absolutely.</blockquote><h3>KNAUER Ion Exclusion and Ligand Exchange Columns</h3>Separation of organic acids, carbohydrates, alcohols on sulfonated cross-linked styrenedivinylbenzene copolymer<ul><li>Modifications<ul><li>Eurokat H</li><li>Eurokat Ca</li><li>Eurokat Pb</li><li>Eurokat Na</li></ul></li><li>High Temperature Methods: Up to 90 °C</li><li>Method Development: Optional up to 10 % organic solvent</li><li>Chemically stable: pH 1–12</li><li>Sustainability: Aqueous eluents protect the environment and are cost-effectiv</li><li>User Friendly: Simple and robust methods for daily analysis. Versatile in its use.</li><li>Simplicity: Easy purchase via our online store with fast delivery.&nbsp;</li></ul><h4>Characteristics&nbsp;</h4>Eurokat high performance polymer phases were especially developed for the separation of organic acids, carbohydrates, alcohols and even complex mixtures of these compounds. Eurokat is a sulfonated cross-linked styrenedivinylbenzene copolymer available in several ionic forms (H, Ca and Pb). This particular cation exchanger is characterized by an outstanding density of functional groups, making it the ideal choice for your ion exclusion, size exclusion and ligand exchange chromatography.<h4>Choice of chromatographic conditions&nbsp;</h4>The Eurokat stationary phase is designed to be applicable to a wide range of diverse chromatographic conditions. All Eurokat columns can be used at temperatures up to 90 °C with no organic solvents. The best separation of sugars can be achieved using between 60 to 90 °C. To extend separation performance, it is possible to connect up to three columns of Eurokat in series. Eurokat columns require no organic solvents and thus are environmentally friendly.&nbsp;<h4>Stability&nbsp;</h4>Eurokat polymer columns are extremely stable over the whole pH range. This is one striking advantage compared with silica-based phases which have a limited lifetime at pH extremes, especially in the higher pH range. Most importantly, Eurokat phases show extraordinary column lifetime stability and are not affected by aqueous solvents.&nbsp;<h4>Application areas&nbsp;</h4><ul><li>Carbohydrates and organic acids in softdrinks and fruit juices&nbsp;</li><li>Sugar substitutes</li><li>Food preservatives</li><li>Dairy products</li><li>Urine analytic (Uric acid, Hippuric acid)</li><li>Monitoring of fermentation processes</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Principle_of_ligand_exchange_mechanism_a5b7c21c43.jpg" alt="KNAUER: Eurokat - Principle of ligand exchange mechanism" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Principle_of_ligand_exchange_mechanism_a5b7c21c43.jpg 245w," sizes="100vw" width="1382" height="570">

KNAUER Eurokat Pb & Ca Ion Exclusion/Ligand Exchange Columns (USP L34 / USP L19)

The ionic forms Ca and Pb are best suited for the analysis of smaller carbohydrates like mono- and disaccharides and sugars up to a degree of polymerization (DP) of 4. 

Analysis of mono- and disaccharidesThe ionic forms Ca and Pb are best suited for the analysis of smaller carbohydrates like mono- and disaccharides and sugars up to a degree of polymerization (DP) of 4. It is a cation exchange material with 6 % cross linkage of the styrenedivinylbenzene copolymer. Best results are achieved with aqueous eluents, recommended eluent is pure deionized water. The usage of up to 10 % organic content in the mobile phase is possible.<h5>Properties</h5><ul><li>Polymer phase for the determination of mono- and disaccharides</li><li>Pb (USP L34) form, 6 % cross linkage</li><li>Cation exchanger, extremely long lasting lifetime when correctly handled, best results with aqueous eluents, recommended eluent is pure deionized water, usage of up to 10 % organic content in the mobile phase is possible</li></ul><h5>Technical Data</h5><ul><li>Sulfonated cross-linked styrenedivinylbenzene copolymer with 6 % cross linkage in the ionic form Pb, available in 10μm particle size, pressure stable up to maximum 100 bar</li></ul><h5>Recommended application areas</h5><ul><li>Especially designed for the analysis of small carbohydrates up to DP 4</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Eurokat_Pb_Ca_Chromatogram_2054f70e49.webp" alt="KNAUER: Eurokat Pb &amp; Ca Chromatogram" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Eurokat_Pb_Ca_Chromatogram_2054f70e49.webp 245w," sizes="100vw" width="690" height="271"><blockquote>Tip: Eurokat columns are used at high temperatures. During equilibration it is very important to have an eye on the backpressure and to start with very low flow rates and increase them only slowly and stepwise after the column has adapted to the temperature.</blockquote><h3>KNAUER Ion Exclusion and Ligand Exchange Columns</h3>Separation of organic acids, carbohydrates, alcohols on sulfonated cross-linked styrenedivinylbenzene copolymer<ul><li>Modifications<ul><li>Eurokat H</li><li>Eurokat Ca</li><li>Eurokat Pb</li><li>Eurokat Na</li></ul></li><li>High Temperature Methods: Up to 90 °C</li><li>Method Development: Optional up to 10 % organic solvent</li><li>Chemically stable: pH 1–12</li><li>Sustainability: Aqueous eluents protect the environment and are cost-effectiv</li><li>User Friendly: Simple and robust methods for daily analysis. Versatile in its use.</li><li>Simplicity: Easy purchase via our online store with fast delivery.&nbsp;</li></ul><h4>Characteristics&nbsp;</h4>Eurokat high performance polymer phases were especially developed for the separation of organic acids, carbohydrates, alcohols and even complex mixtures of these compounds. Eurokat is a sulfonated cross-linked styrenedivinylbenzene copolymer available in several ionic forms (H, Ca and Pb). This particular cation exchanger is characterized by an outstanding density of functional groups, making it the ideal choice for your ion exclusion, size exclusion and ligand exchange chromatography.<h4>Choice of chromatographic conditions&nbsp;</h4>The Eurokat stationary phase is designed to be applicable to a wide range of diverse chromatographic conditions. All Eurokat columns can be used at temperatures up to 90 °C with no organic solvents. The best separation of sugars can be achieved using between 60 to 90 °C. To extend separation performance, it is possible to connect up to three columns of Eurokat in series. Eurokat columns require no organic solvents and thus are environmentally friendly.&nbsp;<h4>Stability&nbsp;</h4>Eurokat polymer columns are extremely stable over the whole pH range. This is one striking advantage compared with silica-based phases which have a limited lifetime at pH extremes, especially in the higher pH range. Most importantly, Eurokat phases show extraordinary column lifetime stability and are not affected by aqueous solvents.&nbsp;<h4>Application areas&nbsp;</h4><ul><li>Carbohydrates and organic acids in softdrinks and fruit juices&nbsp;</li><li>Sugar substitutes</li><li>Food preservatives</li><li>Dairy products</li><li>Urine analytic (Uric acid, Hippuric acid)</li><li>Monitoring of fermentation processes</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Principle_of_ligand_exchange_mechanism_a5b7c21c43.jpg" alt="KNAUER: Eurokat - Principle of ligand exchange mechanism" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Principle_of_ligand_exchange_mechanism_a5b7c21c43.jpg 245w," sizes="100vw" width="1382" height="570">

KNAUER Eurokat Na Ion Exclusion/Ligand Exchange Columns

The ionic form Na is best suited for the analysis of sugars oligomers up to a degree of polymerization (DP) of 8. 

Analysis of sugar oligomersThe ionic form Na is best suited for the analysis of sugars oligomers up to a degree of polymerization (DP) of 8. It is a cation exchange material with 6 % cross linkage of the styrenedivinylbenzene copolymer. Best results are achieved with aqueous eluents, recommended eluent is pure deionized water. The usage of up to 10 % organic content in the mobile phase is possible.&nbsp;<h5>Properties</h5><ul><li>Polymer phase for the determination of sugar oligomers</li><li>Na form, 6 % cross linkage</li><li>Cation exchanger, extremly long lasting lifetime when correctly handled, best results with aqueous eluents, recommended eluent is pure deionized water, usage of up to 10 % organic content in the mobile phase is possible</li></ul><h5>Technical Data</h5><ul><li>Sulfonated cross-linked styrenedivinylbenzene copolymer with 6 % cross linkage in the ionic form Na, available in 10 μm particle size, pressure stable up to maximum 100 bar</li></ul><h5>Recommended application areas</h5><ul><li>Especially designed for the analysis of sugar oligomers, separates carbohydrates up to DP 8</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Eurokat_Na_Chromatogram_7d3d81fa52.webp" alt="KNAUER: Eurokat Na Chromatogram" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Eurokat_Na_Chromatogram_7d3d81fa52.webp 188w," sizes="100vw" width="686" height="568"><blockquote>Tip: Eurokat columns are typically used with 100 % aqueous eluents. For storage, please avoid microbial growth by flushing the Eurokat column with 0.45 µm filtered ultrapure water and storing it at 4 °C.</blockquote><h3>KNAUER Ion Exclusion and Ligand Exchange Columns</h3>Separation of organic acids, carbohydrates, alcohols on sulfonated cross-linked styrenedivinylbenzene copolymer<ul><li>Modifications<ul><li>Eurokat H</li><li>Eurokat Ca</li><li>Eurokat Pb</li><li>Eurokat Na</li></ul></li><li>High Temperature Methods: Up to 90 °C</li><li>Method Development: Optional up to 10 % organic solvent</li><li>Chemically stable: pH 1–12</li><li>Sustainability: Aqueous eluents protect the environment and are cost-effectiv</li><li>User Friendly: Simple and robust methods for daily analysis. Versatile in its use.</li><li>Simplicity: Easy purchase via our online store with fast delivery.&nbsp;</li></ul><h4>Characteristics&nbsp;</h4>Eurokat high performance polymer phases were especially developed for the separation of organic acids, carbohydrates, alcohols and even complex mixtures of these compounds. Eurokat is a sulfonated cross-linked styrenedivinylbenzene copolymer available in several ionic forms (H, Ca and Pb). This particular cation exchanger is characterized by an outstanding density of functional groups, making it the ideal choice for your ion exclusion, size exclusion and ligand exchange chromatography.<h4>Choice of chromatographic conditions&nbsp;</h4>The Eurokat stationary phase is designed to be applicable to a wide range of diverse chromatographic conditions. All Eurokat columns can be used at temperatures up to 90 °C with no organic solvents. The best separation of sugars can be achieved using between 60 to 90 °C. To extend separation performance, it is possible to connect up to three columns of Eurokat in series. Eurokat columns require no organic solvents and thus are environmentally friendly.&nbsp;<h4>Stability&nbsp;</h4>Eurokat polymer columns are extremely stable over the whole pH range. This is one striking advantage compared with silica-based phases which have a limited lifetime at pH extremes, especially in the higher pH range. Most importantly, Eurokat phases show extraordinary column lifetime stability and are not affected by aqueous solvents.&nbsp;<h4>Application areas&nbsp;</h4><ul><li>Carbohydrates and organic acids in softdrinks and fruit juices&nbsp;</li><li>Sugar substitutes</li><li>Food preservatives</li><li>Dairy products</li><li>Urine analytic (Uric acid, Hippuric acid)</li><li>Monitoring of fermentation processes</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Principle_of_ligand_exchange_mechanism_a5b7c21c43.jpg" alt="KNAUER: Eurokat - Principle of ligand exchange mechanism" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Principle_of_ligand_exchange_mechanism_a5b7c21c43.jpg 245w," sizes="100vw" width="1382" height="570">

KNAUER Eurosil Bioselect 300 C4 HPLC Columns (USP L26)

Eurosil Bioselect C4 has been specifically developed for the determination and purification of peptides, proteins, and oligonucleotides up to a molecular weight of approximately 100 kDa. 

Analytical wide pore phase for the determination of biomolecules bigger than 20 kDaEurosil Bioselect C4 has been specifically developed for the determination and purification of peptides, proteins, and oligonucleotides up to a molecular weight of approximately 100 kDa. The optimized manufacturing process guarantees excellent batch–to-batch reproducibility. The Eurosil Bioselect sorbent is the first choice for Biochromatography with silica material.<h5>Properties</h5><ul><li>Ultra pure, spherical wide pore HPLC phase based on wide pore silica gel</li><li>Unpolar, monomeric C4 modification, endcapped</li><li>2 % carbon content (conventional endcapping)</li><li>Separation mechanism: hydrophobic and hydrophilic interaction</li></ul><figure class="image"><img style="aspect-ratio:200/400;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_C4_3f3adfbdb4.webp" alt="KNAUER: C4" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_C4_3f3adfbdb4.webp 78w," sizes="100vw" width="200" height="400"></figure><h5>Recommended application areas</h5><ul><li>Hydrophilic biomolecules and especially peptides larger than 10 000- 20 000 Da</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Eurosil_Bioselect_Phases_98acc32d0e.jpg" alt="KNAUER: Eurosil Bioselect - Phases and recommended sizes of molecules" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Eurosil_Bioselect_Phases_98acc32d0e.jpg 245w," sizes="100vw" width="1385" height="778"><h3>KNAUER Wide pore HPLC columns</h3>For enhanced resolution, capacity and recovery of proteins and other biomolecules<ul><li>Material: Silica or polymer particles</li><li>Separation Ranges: 2–100 kDa</li><li>Column Brands: Eurosil Bioselect or AppliChrom®</li><li>Particle sizes: 3–10 µm</li><li>Pore Sizes: 300 or 100–1000 Å</li><li>Specific surface: 90 ± 5 m2/g</li><li>Pore volume: 0.8 ml/g</li><li>Density: 450 g/l</li><li>Applications: Peptides exceeding approximately 50 amino acids and oligonucleotides greater than 25 residues</li><li>Customize: Bioanalysis requires a lot of flexibility in the pore size, the pH range, the temperatures and the solvents used. To achieve this, we cross phase limits.</li></ul><h4>Characteristics&nbsp;</h4><ul><li>Eurosil Bioselect columns are available in 4 modifications, useful for a wide range of separation tasks involving large molecules up to 100 000 Da.</li><li>Strict manufacturing procedures ensure a very narrow pore size distribution.</li><li>Interfering anions or heavy metal ions on the silica surface are not present in Eurosil Bioselect columns because only ultra pure silica gel and high quality chemical modifications are employed.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Eurosil_Bioselect_85cfc2d201.jpg" alt="KNAUER: Eurosil Bioselect" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Eurosil_Bioselect_85cfc2d201.jpg 222w," sizes="100vw" width="1114" height="782"><h4>Separation mechanism of Eurosil Bioselect</h4>To separate larger molecules, they need to freely access the interior of the pores of the packing material. Therefore, the analytes’ diameter must be smaller than the average pore diameter.&nbsp;For higher molecular weight solutes, the use of lower pore size materials (60-120 Å) as typically used for the analysis of small molecules may result restricted diffusion in the material´s pores and therewith reduced column efficiency.&nbsp;<h4>Modifications</h4>The recommended modification of Eurosil Bioselect depends on the molecular weight of the analytes.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Eurosil_Bioselect_chemical_modifications_1fd5d87f7b.jpg" alt="KNAUER: Eurosil Bioselect - chemical modifications" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Eurosil_Bioselect_chemical_modifications_1fd5d87f7b.jpg 245w," sizes="100vw" width="955" height="505"> &nbsp;

KNAUER Eurosil Bioselect 300 C8 HPLC Columns (USP L7)

Eurosil Bioselect C8 has been specifically developed for the determination and purification of peptides, proteins, and oligonucleotides up to a molecular weight of approximately 20 kDa.

Analytical wide pore phase for the determination of biomolecules bigger than 5000 DaEurosil Bioselect C8 has been specifically developed for the determination and purification of peptides, proteins, and oligonucleotides up to a molecular weight of approximately 20 kDa.<h5>Properties</h5><ul><li>Ultra pure, spherical wide pore HPLC phase based on wide pore silica gel</li><li>Unpolar, monomeric C8 modification, endcapped</li><li>4.5 % carbon content (conventional endcapping)</li><li>Separation mechanism: hydrophobic interaction</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_C8_hydrosphob_6986c292b4.webp" alt="KNAUER: C8" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_C8_hydrosphob_6986c292b4.webp 144w," sizes="100vw" width="381" height="413"><h5>Recommended application areas</h5><ul><li>Hydrophilic biomolecules, peptides, peptide mapping after enzymatic digestion</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Eurosil_Bioselect_Phases_98acc32d0e.jpg" alt="KNAUER: Eurosil Bioselect - Phases and recommended sizes of molecules" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Eurosil_Bioselect_Phases_98acc32d0e.jpg 245w," sizes="100vw" width="1385" height="778"><h3>KNAUER Wide pore HPLC columns</h3>For enhanced resolution, capacity and recovery of proteins and other biomolecules<ul><li>Material: Silica or polymer particles</li><li>Separation Ranges: 2–100 kDa</li><li>Column Brands: Eurosil Bioselect or AppliChrom®</li><li>Particle sizes: 3–10 µm</li><li>Pore Sizes: 300 or 100–1000 Å</li><li>Specific surface: 90 ± 5 m2/g</li><li>Pore volume: 0.8 ml/g</li><li>Density: 450 g/l</li><li>Applications: Peptides exceeding approximately 50 amino acids and oligonucleotides greater than 25 residues</li><li>Customize: Bioanalysis requires a lot of flexibility in the pore size, the pH range, the temperatures and the solvents used. To achieve this, we cross phase limits.</li></ul><h4>Characteristics&nbsp;</h4><ul><li>Eurosil Bioselect columns are available in 4 modifications, useful for a wide range of separation tasks involving large molecules up to 100 000 Da.</li><li>Strict manufacturing procedures ensure a very narrow pore size distribution.</li><li>Interfering anions or heavy metal ions on the silica surface are not present in Eurosil Bioselect columns because only ultra pure silica gel and high quality chemical modifications are employed.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Eurosil_Bioselect_85cfc2d201.jpg" alt="KNAUER: Eurosil Bioselect" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Eurosil_Bioselect_85cfc2d201.jpg 222w," sizes="100vw" width="1114" height="782"><h4>Separation mechanism of Eurosil Bioselect</h4>To separate larger molecules, they need to freely access the interior of the pores of the packing material. Therefore, the analytes’ diameter must be smaller than the average pore diameter.&nbsp;For higher molecular weight solutes, the use of lower pore size materials (60-120 Å) as typically used for the analysis of small molecules may result restricted diffusion in the material´s pores and therewith reduced column efficiency.&nbsp;<h4>Modifications</h4>The recommended modification of Eurosil Bioselect depends on the molecular weight of the analytes.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Eurosil_Bioselect_chemical_modifications_1fd5d87f7b.jpg" alt="KNAUER: Eurosil Bioselect - chemical modifications" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Eurosil_Bioselect_chemical_modifications_1fd5d87f7b.jpg 245w," sizes="100vw" width="955" height="505"> &nbsp;

KNAUER Eurosil Bioselect 300 C18 HPLC Columns (USP L1)

Eurosil Bioselect C18 has been specifically developed for the determination and purification of peptides, proteins, and oligonucleotides up to a molecular weigth of approximately 5 kDa.

Analytical wide pore phase for the determination of biomolecules bigger than 2000 Da​Eurosil Bioselect C18 has been specifically developed for the determination and purification of peptides, proteins, and oligonucleotides up to a molecular weigth of approximately 5 kDa.<h5>Properties</h5><ul><li>Ultra pure, spherical wide pore HPLC phase based on silica gel</li><li>Unpolar, monomeric C18 (Octadecyl) modification, endcapped</li><li>7.5 % carbon content (conventional endcapping)</li><li>Separation mechanism: hydrophobic interaction</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_C18_Endcapped_standard_edd2523aca.webp" alt="KNAUER: C18 Endcapped standard" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_C18_Endcapped_standard_edd2523aca.webp 234w," sizes="100vw" width="688" height="458"><h5>Recommended application areas</h5><ul><li>Hydrophilic biomolecules, peptides, peptide mapping after enzymatic digestion</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Eurosil_Bioselect_Phases_98acc32d0e.jpg" alt="KNAUER: Eurosil Bioselect - Phases and recommended sizes of molecules" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Eurosil_Bioselect_Phases_98acc32d0e.jpg 245w," sizes="100vw" width="1385" height="778"><blockquote>Tip: Caused by the larger pore size of 300 Å, Eurosil Bioselect phases are not as mechanical stable as classical silica gel phases with up to 150 Å and should not be used above 200 bar pressure.</blockquote><h3>KNAUER Wide pore HPLC columns</h3>For enhanced resolution, capacity and recovery of proteins and other biomolecules<ul><li>Material: Silica or polymer particles</li><li>Separation Ranges: 2–100 kDa</li><li>Column Brands: Eurosil Bioselect or AppliChrom®</li><li>Particle sizes: 3–10 µm</li><li>Pore Sizes: 300 or 100–1000 Å</li><li>Specific surface: 90 ± 5 m2/g</li><li>Pore volume: 0.8 ml/g</li><li>Density: 450 g/l</li><li>Applications: Peptides exceeding approximately 50 amino acids and oligonucleotides greater than 25 residues</li><li>Customize: Bioanalysis requires a lot of flexibility in the pore size, the pH range, the temperatures and the solvents used. To achieve this, we cross phase limits.</li></ul><h4>Characteristics&nbsp;</h4><ul><li>Eurosil Bioselect columns are available in 4 modifications, useful for a wide range of separation tasks involving large molecules up to 100 000 Da.</li><li>Strict manufacturing procedures ensure a very narrow pore size distribution.</li><li>Interfering anions or heavy metal ions on the silica surface are not present in Eurosil Bioselect columns because only ultra pure silica gel and high quality chemical modifications are employed.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Eurosil_Bioselect_85cfc2d201.jpg" alt="KNAUER: Eurosil Bioselect" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Eurosil_Bioselect_85cfc2d201.jpg 222w," sizes="100vw" width="1114" height="782"><h4>Separation mechanism of Eurosil Bioselect</h4>To separate larger molecules, they need to freely access the interior of the pores of the packing material. Therefore, the analytes’ diameter must be smaller than the average pore diameter.&nbsp;For higher molecular weight solutes, the use of lower pore size materials (60-120 Å) as typically used for the analysis of small molecules may result restricted diffusion in the material´s pores and therewith reduced column efficiency.&nbsp;<h4>Modifications</h4>The recommended modification of Eurosil Bioselect depends on the molecular weight of the analytes.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Eurosil_Bioselect_chemical_modifications_1fd5d87f7b.jpg" alt="KNAUER: Eurosil Bioselect - chemical modifications" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Eurosil_Bioselect_chemical_modifications_1fd5d87f7b.jpg 245w," sizes="100vw" width="955" height="505"> &nbsp;

KNAUER Eurosil Bioselect 300 C18A HPLC Columns (USP L1)

Eurosil Bioselect C18A has been specifically developed for the determination and purification of peptides, proteins, and oligonucleotides up to a molecular weigth of approximately 5 kDa.

Analytical wide pore phase for the determination of biomolecules up to 5000 Da​Eurosil Bioselect C18A has been specifically developed for the determination and purification of peptides, proteins, and oligonucleotides up to a molecular weigth of approximately 5 kDa.<h5>Properties</h5><ul><li>Ultra pure, spherical wide pore HPLC phase based on silica gel</li><li>Unpolar, monomeric C18 (Octadecyl) modification, endcapped</li><li>7 % carbon content (hydrophilic endcapping)</li><li>Separation mechanism: hydrophobic interaction</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_C18_A_6f4b0c3063.webp" alt="KNAUER: C18A" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_C18_A_6f4b0c3063.webp 245w," sizes="100vw" width="690" height="428"><h5>Recommended application areas</h5><ul><li>Hydrophilic and polar biomolecules, peptides, very polar biomolecules separated with 100 % aqueous eluents</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Eurosil_Bioselect_Phases_98acc32d0e.jpg" alt="KNAUER: Eurosil Bioselect - Phases and recommended sizes of molecules" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Eurosil_Bioselect_Phases_98acc32d0e.jpg 245w," sizes="100vw" width="1385" height="778"><h3>KNAUER Wide pore HPLC columns</h3>For enhanced resolution, capacity and recovery of proteins and other biomolecules<ul><li>Material: Silica or polymer particles</li><li>Separation Ranges: 2–100 kDa</li><li>Column Brands: Eurosil Bioselect or AppliChrom®</li><li>Particle sizes: 3–10 µm</li><li>Pore Sizes: 300 or 100–1000 Å</li><li>Specific surface: 90 ± 5 m2/g</li><li>Pore volume: 0.8 ml/g</li><li>Density: 450 g/l</li><li>Applications: Peptides exceeding approximately 50 amino acids and oligonucleotides greater than 25 residues</li><li>Customize: Bioanalysis requires a lot of flexibility in the pore size, the pH range, the temperatures and the solvents used. To achieve this, we cross phase limits.</li></ul><h4>Characteristics&nbsp;</h4><ul><li>Eurosil Bioselect columns are available in 4 modifications, useful for a wide range of separation tasks involving large molecules up to 100 000 Da.</li><li>Strict manufacturing procedures ensure a very narrow pore size distribution.</li><li>Interfering anions or heavy metal ions on the silica surface are not present in Eurosil Bioselect columns because only ultra pure silica gel and high quality chemical modifications are employed.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Eurosil_Bioselect_85cfc2d201.jpg" alt="KNAUER: Eurosil Bioselect" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Eurosil_Bioselect_85cfc2d201.jpg 222w," sizes="100vw" width="1114" height="782"><h4>Separation mechanism of Eurosil Bioselect</h4>To separate larger molecules, they need to freely access the interior of the pores of the packing material. Therefore, the analytes’ diameter must be smaller than the average pore diameter.&nbsp;For higher molecular weight solutes, the use of lower pore size materials (60-120 Å) as typically used for the analysis of small molecules may result restricted diffusion in the material´s pores and therewith reduced column efficiency.&nbsp;<h4>Modifications</h4>The recommended modification of Eurosil Bioselect depends on the molecular weight of the analytes.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Eurosil_Bioselect_chemical_modifications_1fd5d87f7b.jpg" alt="KNAUER: Eurosil Bioselect - chemical modifications" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Eurosil_Bioselect_chemical_modifications_1fd5d87f7b.jpg 245w," sizes="100vw" width="955" height="505"> &nbsp;

Products from category Analytical HPLC columns focused on LC columns - page 11

Related content

New blood biomarkers reveal how faithfully diabetes patients take metformin

Steroidal hormones and neurosteroids – novel therapeutic strategies in bacterial infections

EU Regulation 396/2005: Pesticide Residue Testing and the Critical Role of QuEChERS Evaporation in Food Safety