Derivatizing amino acids doesn’t have to take hours to do. A more hands-off solution can save your lab hours of prep work. And help you trust your data even more.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Fisher_Scientific_How_to_Cut_HPLC_Sample_Preparation_Time_for_Derivatizing_Amino_Acids_f41f58db04.jpeg" alt="Thermo Fisher Scientific: How to Cut HPLC Sample Preparation Time for Derivatizing Amino Acids." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Fisher_Scientific_How_to_Cut_HPLC_Sample_Preparation_Time_for_Derivatizing_Amino_Acids_f41f58db04.jpeg 245w," sizes="100vw" width="1024" height="512">Ever wonder what makes a simple molecule like valine so complicated to measure?Amino acids—the building blocks of proteins—are everywhere. In your food. Body. And even the fertilizers that help grow our food. But measuring these compounds precisely? That’s a classic analytical headache, even for an experienced chromatographer.Ask any lab scientist who’s done amino acid analysis, and they’ll tell you the chromatographic separation isn’t the hard part. The challenge is sample preparation, or everything before the chromatography. Handling toxic reagents. The repeated pipetting. And then timing the derivatization reactions just right.All these manual steps can contribute to lower method precision and data reproducibility.So, what’s the solution? Using a more hands-off approach. You get the same trusted chemical reaction, but your method is now faster, cleaner, and more reliable.Let’s walk through a real-life example of how your lab can derivatize amino acids directly inside the HPLC autosampler needle.<h3>Key takeaways</h3><div><ul><li>Manual derivatization of amino acids is laborious, error-prone, and handling toxic chemicals can pose health hazards to lab staff.</li><li>Automated in-needle OPA/FMOC derivatization of amino acids is a time- and labor-saving approach for HPLC-FLD analysis.</li><li>Reliable method performance, column stability over several hundred injections, and using inexpensive reagents facilitates high sample throughput at low costs per sample for routine laboratories.</li><li>Sample matrices of medium and high complexity (beverages, food, fertilizers) using in-needle derivatization is robust and reproducible.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Fisher_Scientific_How_to_Cut_HPLC_Sample_Preparation_Time_for_Derivatizing_Amino_Acids_2_a906250f79.jpeg" alt="Thermo Fisher Scientific: How to Cut HPLC Sample Preparation Time for Derivatizing Amino Acids: Illustration showing manual derivatization versus in-needle derivatization." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Fisher_Scientific_How_to_Cut_HPLC_Sample_Preparation_Time_for_Derivatizing_Amino_Acids_2_a906250f79.jpeg 245w," sizes="100vw" width="700" height="410"><h3>Why does the derivatisation of amino acids still matter when aerosol detectors are an option? The unmatched sensitivity of fluorescence detection compared to evaporative technology.</h3>Most amino acids don’t have double bonds that naturally absorb UV light, meaning your HPLC detector can’t “see” the compounds directly.To solve these visibility issues, chemists use derivatization. The conjugation reaction is brilliant chemistry, facilitating the formation of <a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/content/lifetech/global/en/home/industrial/chromatography/chromatography-learning-center/liquid-chromatography-information/hplc-system-components/how-hplc-detectors-work.html">fluorescent derivatives</a> suitable for sensitive and precise analysis.This technique involves reacting amino acids in the solution for analysis with reagents that make the amino acids fluorescent. The most common pair are OPA (ortho-phthaldialdehyde) for primary amino acids and FMOC-Cl (9-fluorenylmethyloxycarbonyl chloride) for secondary ones.Now here’s what can go wrong. You measure reagents, mix samples by hand, wait for the reaction, then inject onto your HPLC instrument. Small inconsistencies, such as a few seconds too long or a reagent variation, can mean BIG differences in peak response, method accuracy, and data reproducibility. Removing these inconsistencies is where automated in-needle derivatization comes in.<h3>Let your HPLC autosampler needle handle the not-so-friendly laborious tasks</h3>Switching from manual to automated in-needle derivatization can help make this labor-intensive process easier for everyone in your lab, while improving data consistency and overall lab safety. &nbsp;Here’s how:<div><div><ul><li>Instead of manually preparing reaction mixtures, you can use a compatible instrument, like<a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products?category=37&amp;manufacturerItems=3&amp;search=vanquish"> Thermo Scientific Vanquish LC Systems</a>, to perform in-needle derivatization.</li><li>And, with the helpful guidance of supporting software, you can automatically mix samples and reagents in the needle, time the reaction more precisely, and inject the derivatized sample onto the column.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Fisher_Scientific_How_to_Cut_HPLC_Sample_Preparation_Time_for_Derivatizing_Amino_Acids_3_5c636b1584.jpeg" alt="Thermo Fisher Scientific: How to Cut HPLC Sample Preparation Time for Derivatizing Amino Acids: In-needle derivatization of primary and secondary AAs with OPA/MPA and FMOC-Cl reagents for subsequent LC analysis of the fluorescent derivatives. *Borate buffer pH 10, **acetic acid for quenching." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Fisher_Scientific_How_to_Cut_HPLC_Sample_Preparation_Time_for_Derivatizing_Amino_Acids_3_5c636b1584.jpeg 245w," sizes="100vw" width="768" height="384"><h3>A real-life example showcasing better efficiency, robustness, and throughput capabilities.</h3>What makes this automated workflow stand out isn’t a new reaction—but rather a faster way of working with your HPLC instrument.The reactions between OPA/MPA and FMOC-Cl still happen as before, but now the reaction is controlled digitally through <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/cn_003698_hplc_vanquish_workflow_amino_acid_analysis_derivatization_cn003698_na_en_e76e3abe44.pdf">Thermo Scientific Chromeleon Chromatography Data System</a> (CDS).As demonstrated in our whitepaper, each reagent draw, mix, and injection step is defined in a Custom Injection Program (CIP), eliminating timing errors and variability. <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/76">Chromeleon CDS</a> visualizes every step in its Instrument Method Editor, tracks parameters in real time, and logs events in the Audit Trail for compliance.And since the workflow design has flexibility in mind, you can use Chromeleon CDS or a <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/ab_004093_hplc_vanquish_core_amino_acids_needle_derivatization_ab004093_na_en_edb37df857.pdf">third-party software</a>, with identical parameters, which gives your labs the freedom to work within your preferred environment without retraining staff or rewriting SOPs.<h3>Trusting your data and a faster derivatization technique. That’s the science behind putting your sample preparation inside the needle.</h3>The most beneficial part of this workflow is the hours of time your lab and broader QC team will save.<ul><li>Consistent fluorescence response and accurate quantitation for all amino acids</li><li>Excellent injection-to-injection reproducibility, even across reagent batches</li><li>Improved safety through reduced manual solvent handling</li><li>Less hands-on time, freeing analysts for higher-value work</li><li>Seamless CDS integration for full audit traceability</li></ul>So next time you’re pipetting derivatization reagents by hand, secretly wishing there was a better way, why not consider an automated method approach?You get the same chemistry, performed automatically inside the autosampler, hands-free, ready to inject in minutes with reproducible data that you can trust.Learn more about this new automated amino acid analytical workflow in our <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/cn_003698_hplc_vanquish_workflow_amino_acid_analysis_derivatization_cn003698_na_en_e76e3abe44.pdf">customer application note today</a>.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Fisher_Scientific_How_to_Cut_HPLC_Sample_Preparation_Time_for_Derivatizing_Amino_Acids_4_341aed0b3a.jpeg" alt="Thermo Fisher Scientific: How to Cut HPLC Sample Preparation Time for Derivatizing Amino Acids: Chromatographic results of calibration standard (50 µM) measured with the Vanquish Core HPLC system, comparing method performance on 1st and 14th day of measurements." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Fisher_Scientific_How_to_Cut_HPLC_Sample_Preparation_Time_for_Derivatizing_Amino_Acids_4_341aed0b3a.jpeg 245w," sizes="100vw" width="768" height="384"><h3>Helpful tips to improve method robustness with Vanquish LC Systems+ Chromeleon CDS</h3><ol><li>Use a 100 µL sample loop for thorough and reproducible mixing of the sample and reagents during the derivatization step.</li><li>Install a passive pre-heater to facilitate proper dilution of the reagents before the column.</li><li>Use guard cartridges for your columns and replace the cartridges when column performance diminishes. Apply smart tools like intelligent run control in Chromeleon CDS for automated checks.</li><li>Replace derivatization reagents in your autosampler daily.</li><li>Periodically flush your column with 100% acetonitrile for 30 minutes to remove persistent reaction products and matrices.</li></ol><blockquote>Visit us on&nbsp;<a target="_blank" rel="noopener noreferrer" href="https://www.linkedin.com/showcase/72003132/admin/dashboard/">LinkedIn:</a>&nbsp;#AutomatedSamplePreparation #HPLC</blockquote></div></div></div>

How to Cut HPLC Sample Preparation Time for Derivatizing Amino Acids

<h3>How long does it actually take to install all the capillaries and fittings on a conventional HPLC system?</h3><h4>The Small Components That Matter Most</h4>When people think about HPLC systems, they often focus on pumps, detectors, columns, or software. Capillaries and fittings are usually seen as minor components because they are relatively inexpensive and physically small. However, every chromatographer eventually discovers that these tiny parts can have a major influence on system performance.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Connecting_a_U_HPLC_system_can_be_difficult_at_some_poorly_accessible_locations_3b837b441b.webp" alt="KNAUER: Connecting a (U)HPLC system can be difficult at some poorly accessible locations" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Connecting_a_U_HPLC_system_can_be_difficult_at_some_poorly_accessible_locations_3b837b441b.webp 208w," sizes="100vw" width="720" height="540">Even decades ago, chromatographers recognized the importance of proper connections. In the 1980s, long before UHPLC became common, John Dolan wrote about minimizing dead volume through correct fitting installation. Today, with UHPLC systems operating at extremely high pressures and using columns with very small particle sizes, dead volume is even less tolerable than before. The topic remains just as relevant today as it was back then.Interestingly, despite what many users assume, the chromatographic column itself is often not the primary source of HPLC or UHPLC problems. In my experience, poor connections are far more commonly responsible for issues such as peak broadening, leaks, or loss of efficiency.<h4>The Early Days of HPLC Capillaries</h4>Anyone who has been working with HPLC for many years will probably remember the era of rigid 1/16" stainless steel tubing. Whenever PEEK tubing was unsuitable, stainless steel capillaries were the standard choice.Setting up a system back then was far from convenient. You first had to locate an appropriate length of tubing somewhere in a drawer full of capillaries. Usually, this meant finding a several-meter-long piece and cutting it yourself using a dedicated capillary cutter. After cutting, you needed to ensure the tubing end was smooth and undamaged, hoping that the previous person using the cutter had not accidentally crushed the inner diameter.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Standard_1_16_Capillary_and_needed_tools_and_the_drawer_we_all_know_pretty_well_943d7ed0b2.jpg" alt="KNAUER: Standard 1/16” Capillary and needed tools and the drawer we all know pretty well" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Standard_1_16_Capillary_and_needed_tools_and_the_drawer_we_all_know_pretty_well_943d7ed0b2.jpg 245w," sizes="100vw" width="1277" height="456">Once cut, the tubing often required additional preparation. You might need to deburr the capillary using a grater, shape it carefully with bending tools, and then finally install it using separate fittings and ferrules. And of course, everyone remembers the frustration of dropping a ferrule onto the laboratory floor, where it effectively disappeared forever.At the same time, laboratories often accumulated drawers filled with pre-assembled capillaries that had fixed fittings attached. Reusing these assemblies was risky. If the fitting geometry did not perfectly match the receiving port, users could unintentionally introduce dead volume into the system. The result was often degraded chromatographic performance, broad peaks, and frustrating troubleshooting sessions involving the entire laboratory team. In worse cases, excessive force could damage threads or receiving ports while attempting to stop leaks.During that period, assembling and connecting a complete HPLC system could easily consume half a day of work.<h4>The Improvement: Flexible and Pre-Cut Capillaries</h4>Later, laboratories gradually adopted pre-cut tubing and flexible capillaries, which represented a significant improvement over manually preparing stainless steel tubing.With these newer capillaries, users simply selected the correct length and installed the tubing directly. Flexible capillaries adapted naturally to the required shape, eliminating much of the manual bending and shaping work. Installation became faster, easier, and far less stressful.Still, these systems had limitations. Although the capillary itself improved, the fitting technology remained largely unchanged. Many of these capillaries were still effectively single-use components. If a connection was installed incorrectly because the tubing was not fully inserted into the receiving port before tightening, the result was often another unusable capillary destined for the growing “capillary drawer.” Sustainability was certainly not a strong point of these systems.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_A_typical_capillary_drawer_It_was_tricky_to_open_and_close_it_sometimes_530dd2087c.webp" alt="KNAUER: A typical capillary drawer. It was tricky to open and close it sometimes" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_A_typical_capillary_drawer_It_was_tricky_to_open_and_close_it_sometimes_530dd2087c.webp 208w," sizes="100vw" width="1024" height="768">Even with these advancements, system setup still required considerable time and effort.<h4>The Real Breakthrough: Modern Tool-Free Connection Systems</h4>A major breakthrough finally arrived when manufacturers introduced a completely redesigned fitting and capillary concept aimed specifically at simplifying UHPLC connections.These newer systems came with fittings pre-installed directly on the capillary. Unlike traditional ferrule-based systems, the fittings automatically adjusted to different port depths and sealed directly at the bottom of the port. This dramatically reduced the amount of torque required and eliminated the need for complicated installation techniques.Perhaps the biggest advantage was convenience. These capillaries could be connected and disconnected more than 100 times without tools, while remaining entirely finger-tight. And best of all, ferrules no longer disappeared onto the laboratory floor.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_The_little_things_that_do_the_click_3a0469d516.jpg" alt="KNAUER: The little things that do the “click”" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_The_little_things_that_do_the_click_3a0469d516.jpg 245w," sizes="100vw" width="1866" height="1022">The system I currently use includes an especially useful feature: a patented torque-limiting mechanism that prevents both under-tightening and over-tightening. Once the correct torque is reached, the fitting produces a tactile “click,” providing immediate feedback that the connection is secure and properly installed every time.<h4>From Half a Day to Fifteen Minutes</h4>Thanks to these modern connection systems and pre-configured startup kits, installing an HPLC or UHPLC system today is dramatically faster than it used to be.What once consumed hours of work can now be completed in less than 15 minutes. The improvements in usability, reproducibility, and sustainability over recent years have been remarkable.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Trouble_free_connection_systom_for_HPLC_and_UHPLC_e62b80154b.webp" alt="KNAUER: Trouble-free connection systom for HPLC and UHPLC" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Trouble_free_connection_systom_for_HPLC_and_UHPLC_e62b80154b.webp 221w," sizes="100vw" width="690" height="487"><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Trouble_free_connection_systom_for_HPLC_and_UHPLC_2_71c24acdf5.webp" alt="KNAUER: Trouble-free connection systom for HPLC and UHPLC" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Trouble_free_connection_systom_for_HPLC_and_UHPLC_2_71c24acdf5.webp 224w," sizes="100vw" width="1920" height="1339">And while today’s solutions already represent a huge leap forward, the evolution of HPLC connection technology is certainly not over yet. Looking ahead, it will be exciting to see how future innovations continue to simplify chromatography workflows even further.<blockquote>If you want to learn more about KNAUER´s capillaries, fittings and (U)HPLC system start-up kits and are interested in details and numbers, I highly recommend our brand <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/r75ev6rjivdbid246k60zrs3gjpvwdi5b8em_fad0f92fd9.pdf">new tech note "Benefits of KNAUER´s trouble-free analytical capillaries in terms of HPLC and UHPLC system performance</a>" and a visit to our <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/2402">products online</a>.</blockquote>

Let´s Connect a whole (U)HPLC system without tools and trouble

News from LabRulezLCMS Library - Week 21, 2026

Article

Product

Application

Science and research

Video

Poster

A unique company dedicated to serving science helping our customers drive productivity and accelerate results. Through our premier brands – Thermo Scientific, Applied Biosystems, Invitrogen, Fisher Scientific and Unity Lab Services.

Thermo Fisher Scientific

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Based in Berlin, KNAUER is a medium-sized, owner-managed company that has been serving the sciences since 1962. We develop and manufacture scientific instruments of superior quality for liquid chromatography, including: Analytical HPLC/UHPLC, Preparative HPLC, Fast protein liquid chromatography (FPLC), Multi-column chromatography/Simulated moving bed (SMB) chromatography. High pressure dosing, in-line detection systems, and osmometry are additional business areas.

KNAUER

KNAUER Eurospher II 100 C8 & C8A (U)HPLC Columns (USP L7)

C8 is a silica gel based stationary phase in reversed phase mode with alternative selectivity compared to C18 phases. 

Classical and hydrophilic/aqueous C8 columns for HPLC and UHPLC (USP L7)C8 is a silica gel based stationary phase in reversed phase mode with alternative selectivity compared to C18 phases. Compared to C18 phases, these columns show less retention due to the lower hydrophobicity.<ul><li>Ultra pure, spherical high performance HPLC phase based on silica gel</li><li>Monomeric C8 (Octyl) modification, standard endcapping, with 10 % carbon content (~ 50 % endcapping)</li></ul><h5>Properties</h5><ul><li>Separation mechanism: Hydrophobic interaction(lower compared to C18 phases)</li></ul><h5>Key features</h5><ul><li>Classical C8 phase, standard 50 % endcapping and 10 % carbon load, outstanding mechanical and chemical stability, suited for analytical as well as semi preparative and preparative applications.</li></ul><h5>Recommended application areas</h5><ul><li>Similar selectivity to C18 phase but less retention due to the lower hydrophobicity; useful for determination of:<ul><li>Water soluble vitamins</li><li>Steroids</li><li>Catecholamines</li><li>Sedatives</li></ul></li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_C8_rp_non_endcapped_3f7727d3fd.webp" alt="KNAUER: C8 RP Non-endcapped" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_C8_rp_non_endcapped_3f7727d3fd.webp 148w," sizes="100vw" width="304" height="321">Hydrophilic C8A phase offers an alternative, more polar selectivity. It is suited for highly polar reversed phase applications with up to 100 % aqueous mobile phases.&nbsp;<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_C8_A_e1f371165e.webp" alt="KNAUER: C8A" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_C8_A_e1f371165e.webp 198w," sizes="100vw" width="473" height="373"><blockquote>Tip: Caution! Even for short term storage all buffer solutions have to be rinsed from the column to prevent crystallization effects.</blockquote>Stationary phases Eurospher II 100 C8 and C8A are provided in these column types: analytical, semi-preparative and preparative.Eurospher II 100 C8 and C8A Analytical Columns are available with these parameters:<ul><li>Column length (mm): 50, 100, 150, 250</li><li>Column ID (mm): 2, 3, 4, 4.6</li><li>Particle size (µm): 2, 3, 5</li></ul>Eurospher II 100 C8 and C8A Semi-Preparative Standard Columns are available with these parameters:<ul><li>Column length (mm): 30, 50, 125, 150, 250</li><li>Column ID (mm): 8, 16</li><li>Particle size (µm): 5, 10</li></ul><h3>KNAUER (U)HPLC Columns</h3>Widest range of HPLC and UHPLC columns for all separation modes and applications.<ul><li>Safe Investment: Robust and reliable columns for attractive price&nbsp;</li><li>Separation Mode: Reversed Phase, HILIC, Normale</li><li>Simplicity: Easy purchase via our online store with fast delivery</li><li>Application: All-rounder for research or highly specialised for high-throughput analysis? We have the best column for your requirements.</li><li>Flexibility: Wide selection of column and particle sizes, for (U)HPLC applications up to 1000 bar</li></ul>KNAUER offers the perfect column for any small molecule separation. No matter which separation mode, molecule and the mobile phase, we offer a suitable (U)HPLC stationary phase. Choose from a wide range of modifications, particle sizes and column dimensions to suit your application. To elongate the lifetime of your column, you can choose to use a suitable precolumn.<figure class="image"><img style="aspect-ratio:787/674;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_KNAUER_U_HPLC_C8_and_C8_A_Columns_083c60f401.webp" alt="KNAUER: KNAUER (U)HPLC Columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_KNAUER_U_HPLC_C8_and_C8_A_Columns_083c60f401.webp 182w," sizes="100vw" width="787" height="674"></figure>

KNAUER AppliChrom® ABOA Cat-Phil SEC Columns

Interaction-free pure GPC & SEC base material with focus on polycationic, polyelectrolytic or funktional amine analytes

AppliChrom® SEC columns for neutral, anionic and additional cationic polymers<h4>Properties:</h4><ul><li>Interaction-free pure GPC &amp; SEC base material with focus on polycationic, polyelectrolytic or funktional amine analytes</li><li>No salt addition is needed to surpress surface adsorption</li><li>No ion exclusion phenomena</li><li>Possible to be used in universal calibration &amp; accurate molecular weight determination even for small polycationic molecules</li><li>Temperature stability between: 10–90 °C</li><li>Stable with: pH 2–10</li><li>Simple, reliable and robust GPC &amp; SEC calibration from dextrans, pullulans et al.</li><li>Low column bleed for low detector gain for improved refractive index, light scattering or viscosity detection</li><li>Large volume and optimized mass transfer for polymers with optimized resolution</li><li>Low cost due to long column lifetime - result of the combination of optimized particle and packing technology</li><li>Recommended eluents: H₂O, buffers</li></ul><h4>Applications</h4>Water soluble analytes like:<ul><li>polycations, polyamines (chitosanes), polyethylenoxides, polysaccharides, polyanions (heparins, pectins), polyethylene oxide (PEO), polyethylene glycol (PEG), Ppolyethyleneimins (PEI), polyvinylimidazole</li></ul><h3>GPC &amp; SEC Columns</h3>GPC &amp; SEC systems offer solutions for various applications and laboratoriesGel permeation chromatography (GPC) and size exclusion chromatography (SEC) separate analytes by size using special columns with a porous matrix. The basic separation principle is based on the fact that smaller molecules penetrate these pores more strongly and therefore move more slowly through the matrix than larger molecules. GPC/SEC is often used as gentle and powerful purification technique or for quality control in research and development. Typical target molecules are polymers, dissolved in organic solvents for GPC, and macro biomolecules like proteins, antibodies or polysaccharides, dissolved in aqueous eluents for SEC.Separation is facilitated by selecting optimal particle and pore sizes. Therefore we offer a wide range of pore sizes (35, 100, 150, 250, 350, 500, 1000, 1500, 10E5, 10E6, 10E7 Å) and several particle sizes (5, 7, 10, 12, 20 µm) as a choice to customize for every application task.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Size_Exclusion_principle_2a432edcc1.webp" alt="KNAUER: Size Exclusion - principle" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Size_Exclusion_principle_2a432edcc1.webp 228w," sizes="100vw" width="1024" height="700"><h3>KNAUER AppliChrom® ABOA columns for aqueous SEC, organic GPC, and special applications</h3><ul><li>AppliChrom® ABOA StyDiViBe Series GPC-columns for GPC analysis of organic molecules using THF, toluene, chloroform.</li><li>AppliChrom ABOA SuperOH-P Series for aqueous GPC/SEC-analysis of mainly neutral and anionic polymers like heparins, polysaccharides, PEO, PEG,....</li><li>AppliChrom® ABOA DMSO-Phil-P Series for DMSO GPC/SEC analysis (humic substances, UF/MUF-glue, p-NIPA, many polycondensates, protein from pea or leguminosae,...)</li><li>AppliChrom® ABOA DMAc-Phil-P Series for GPC/ SEC analysis in DMAc, DMF, NMP. Good for many medium polar substances, polyoxazolines, lignin,...</li><li>AppliChrom® ABOA Cat-Phil-P Series for aqueous GPC/SEC-analysis of special aminic and polycationic polymers like p-DADMAc, PEI/ polyethylenimin, chitosan, copolymers with polyaminofunctions, but also useful for polyanions or neutral polymers like heparin or PEO/PEG, dextran or pullulan.</li><li>Seperation Ranges: 100–50 000 000 Da</li></ul><h4>You decide between classical GPC/SEC columns with conventional mixed pore technology or AppliChrom® BPT technology:</h4>Separate oligomers and polymers with the new GPC media line from AppliChrom® BPT synthesis technology for large range, high resolution separations with increased accuracy in calibration (patent pending).<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg" alt="KNAUER: AppliChrom® ABOA columns." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg 245w," sizes="100vw" width="1379" height="718">

KNAUER AppliChrom® ABOA StyDiViBe GPC Columns

Organic polystyrene-divinylbenzene copolymer base material with high porosity for high resolution

AppliChrom® GPC columns for GPC analysis of organic molecules with THF, toluene, chloroform<h4>Properties:</h4><ul><li>Organic polystyrene-divinylbenzene copolymer base material with high porosity for high resolution</li><li>High pressure stability: up to 150 bar</li><li>Temperature stable: between 10-145 °C</li><li>GPC range: from 0.1 up to 50 000 kDa</li><li>Low column bleed for low detector noise</li><li>High purity to eliminate adsorptive effects and combine pure GPC with long lifetime</li><li>Large calibration ranges for several decades due to the unique process of BPT technology</li><li>Range of individual porosities that can be used individually or in combination</li><li>Optimized for: 1 ml/min flow rate for 8 mm ID columns</li><li>High level of reproducibility and peak precision due to the advanced packing procedure</li><li>Recommended eluents: THF, Toluene, CHCl₃, dichlorbenzene, hexane/EtOAc (10:90, V:V)</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Appli_Chrom_ABOA_Sty_Di_Vi_Be_P_Molecular_sizes_range_ca9a682d2e.jpg" alt="KNAUER: AppliChrom® ABOA StyDiViBe-P - Molecular sizes range" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Appli_Chrom_ABOA_Sty_Di_Vi_Be_P_Molecular_sizes_range_ca9a682d2e.jpg 235w," sizes="100vw" width="1072" height="712"><h4>Applications</h4>Hydrophobic oligomers or polymers like:<ul><li>PVC, PMMA, polystyrene, epoxy resins, polyesters, bisphenol A resins</li></ul><h3>GPC &amp; SEC Columns</h3>GPC &amp; SEC systems offer solutions for various applications and laboratoriesGel permeation chromatography (GPC) and size exclusion chromatography (SEC) separate analytes by size using special columns with a porous matrix. The basic separation principle is based on the fact that smaller molecules penetrate these pores more strongly and therefore move more slowly through the matrix than larger molecules. GPC/SEC is often used as gentle and powerful purification technique or for quality control in research and development. Typical target molecules are polymers, dissolved in organic solvents for GPC, and macro biomolecules like proteins, antibodies or polysaccharides, dissolved in aqueous eluents for SEC.Separation is facilitated by selecting optimal particle and pore sizes. Therefore we offer a wide range of pore sizes (35, 100, 150, 250, 350, 500, 1000, 1500, 10E5, 10E6, 10E7 Å) and several particle sizes (5, 7, 10, 12, 20 µm) as a choice to customize for every application task.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Size_Exclusion_principle_2a432edcc1.webp" alt="KNAUER: Size Exclusion - principle" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Size_Exclusion_principle_2a432edcc1.webp 228w," sizes="100vw" width="1024" height="700"><h3>KNAUER AppliChrom® ABOA columns for aqueous SEC, organic GPC, and special applications</h3><ul><li>AppliChrom® ABOA StyDiViBe Series GPC-columns for GPC analysis of organic molecules using THF, toluene, chloroform.</li><li>AppliChrom ABOA SuperOH-P Series for aqueous GPC/SEC-analysis of mainly neutral and anionic polymers like heparins, polysaccharides, PEO, PEG,....</li><li>AppliChrom® ABOA DMSO-Phil-P Series for DMSO GPC/SEC analysis (humic substances, UF/MUF-glue, p-NIPA, many polycondensates, protein from pea or leguminosae,...)</li><li>AppliChrom® ABOA DMAc-Phil-P Series for GPC/ SEC analysis in DMAc, DMF, NMP. Good for many medium polar substances, polyoxazolines, lignin,...</li><li>AppliChrom® ABOA Cat-Phil-P Series for aqueous GPC/SEC-analysis of special aminic and polycationic polymers like p-DADMAc, PEI/ polyethylenimin, chitosan, copolymers with polyaminofunctions, but also useful for polyanions or neutral polymers like heparin or PEO/PEG, dextran or pullulan.</li><li>Seperation Ranges: 100–50 000 000 Da</li></ul><h4>You decide between classical GPC/SEC columns with conventional mixed pore technology or AppliChrom® BPT technology:</h4>Separate oligomers and polymers with the new GPC media line from AppliChrom® BPT synthesis technology for large range, high resolution separations with increased accuracy in calibration (patent pending).<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg" alt="KNAUER: AppliChrom® ABOA columns." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg 245w," sizes="100vw" width="1379" height="718">

KNAUER AppliChrom® ABOA DMAc-Phil GPC Columns

Organic polymer base material with high porosity for high resolution

AppliChrom® GPC columns for organic GPC analyses in DMAc or DMF<h4>Properties:</h4><ul><li>Organic polymer base material with high porosity for high resolution</li><li>Wide range of porosities and particle sizes</li><li>Pressure stability: up to 150 bar</li><li>Stable between: 35-145 °C</li><li>Excellent reproducibility and resolution due to the advanced packing procedure</li><li>High purity to eliminate adsorptive effects and combine pure GPC with long lifetime</li><li>GPC range from: 100-1 000 000 Da</li><li>Optimal for: 0.5 ml/min flow rates with 8 mm ID colums</li><li>Recommended eluents: DMAc, DMF, NMP, LiBr additive</li></ul><h4>Applications</h4>Slightly polar analytes like:<ul><li>PMMA, polyacryl nitril (PAN), acrylnitrile butadiene styrene (ABS), cellulose, and all DMF and DMAc soluble polymers</li></ul><h3>GPC &amp; SEC Columns</h3>GPC &amp; SEC systems offer solutions for various applications and laboratoriesGel permeation chromatography (GPC) and size exclusion chromatography (SEC) separate analytes by size using special columns with a porous matrix. The basic separation principle is based on the fact that smaller molecules penetrate these pores more strongly and therefore move more slowly through the matrix than larger molecules. GPC/SEC is often used as gentle and powerful purification technique or for quality control in research and development. Typical target molecules are polymers, dissolved in organic solvents for GPC, and macro biomolecules like proteins, antibodies or polysaccharides, dissolved in aqueous eluents for SEC.Separation is facilitated by selecting optimal particle and pore sizes. Therefore we offer a wide range of pore sizes (35, 100, 150, 250, 350, 500, 1000, 1500, 10E5, 10E6, 10E7 Å) and several particle sizes (5, 7, 10, 12, 20 µm) as a choice to customize for every application task.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Size_Exclusion_principle_2a432edcc1.webp" alt="KNAUER: Size Exclusion - principle" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Size_Exclusion_principle_2a432edcc1.webp 228w," sizes="100vw" width="1024" height="700"><h3>KNAUER AppliChrom® ABOA columns for aqueous SEC, organic GPC, and special applications</h3><ul><li>AppliChrom® ABOA StyDiViBe Series GPC-columns for GPC analysis of organic molecules using THF, toluene, chloroform.</li><li>AppliChrom ABOA SuperOH-P Series for aqueous GPC/SEC-analysis of mainly neutral and anionic polymers like heparins, polysaccharides, PEO, PEG,....</li><li>AppliChrom® ABOA DMSO-Phil-P Series for DMSO GPC/SEC analysis (humic substances, UF/MUF-glue, p-NIPA, many polycondensates, protein from pea or leguminosae,...)</li><li>AppliChrom® ABOA DMAc-Phil-P Series for GPC/ SEC analysis in DMAc, DMF, NMP. Good for many medium polar substances, polyoxazolines, lignin,...</li><li>AppliChrom® ABOA Cat-Phil-P Series for aqueous GPC/SEC-analysis of special aminic and polycationic polymers like p-DADMAc, PEI/ polyethylenimin, chitosan, copolymers with polyaminofunctions, but also useful for polyanions or neutral polymers like heparin or PEO/PEG, dextran or pullulan.</li><li>Seperation Ranges: 100–50 000 000 Da</li></ul><h4>You decide between classical GPC/SEC columns with conventional mixed pore technology or AppliChrom® BPT technology:</h4>Separate oligomers and polymers with the new GPC media line from AppliChrom® BPT synthesis technology for large range, high resolution separations with increased accuracy in calibration (patent pending).<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg" alt="KNAUER: AppliChrom® ABOA columns." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg 245w," sizes="100vw" width="1379" height="718">

KNAUER AppliChrom® ABOA DMSO-Phil GPC Columns

AppliChrom® DMSO-PHIL optimized for DMSO-GPC applications from an interaction-free pure GPC base material

AppliChrom® DMSO-PHIL optimized for DMSO-GPC applications<h4>Properties:</h4><ul><li>Interaction-free pure GPC base material</li><li>Temperature stabel between: 40-90 °C (145 °C) depending on application</li><li>Simple, reliable and robust GPC &amp; SEC calibration from dextrans, pullulans et al.</li><li>Low column bleed for low detector gain for improved refractive index, light scattering or viscosity detection</li><li>12 µm particle technology for low back pressure</li><li>Tolerates traces of water and NaNO₃ additve</li><li>Large volume and optimized mass transfer for polymers with optimized resolution</li><li>Low cost due to long column lifetime - result of the combination of optimized particle and packing technology</li><li>Recommended eluents: DMSO, 0.075 M NaNO₃</li></ul><h4>Applications</h4>Polar, not water soluble oligomers or polymers like:<ul><li>polysaccharides, lignin, amylose, starch, humic acids, polyvenyl pyridin, PNIPA, polyvinyl alcohol (PVA), melamin-urea-formaldehyd resin (MUF) or urea-formaldehyd resin (UF)</li></ul><h3>GPC &amp; SEC Columns</h3>GPC &amp; SEC systems offer solutions for various applications and laboratoriesGel permeation chromatography (GPC) and size exclusion chromatography (SEC) separate analytes by size using special columns with a porous matrix. The basic separation principle is based on the fact that smaller molecules penetrate these pores more strongly and therefore move more slowly through the matrix than larger molecules. GPC/SEC is often used as gentle and powerful purification technique or for quality control in research and development. Typical target molecules are polymers, dissolved in organic solvents for GPC, and macro biomolecules like proteins, antibodies or polysaccharides, dissolved in aqueous eluents for SEC.Separation is facilitated by selecting optimal particle and pore sizes. Therefore we offer a wide range of pore sizes (35, 100, 150, 250, 350, 500, 1000, 1500, 10E5, 10E6, 10E7 Å) and several particle sizes (5, 7, 10, 12, 20 µm) as a choice to customize for every application task.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Size_Exclusion_principle_2a432edcc1.webp" alt="KNAUER: Size Exclusion - principle" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Size_Exclusion_principle_2a432edcc1.webp 228w," sizes="100vw" width="1024" height="700"><h3>KNAUER AppliChrom® ABOA columns for aqueous SEC, organic GPC, and special applications</h3><ul><li>AppliChrom® ABOA StyDiViBe Series GPC-columns for GPC analysis of organic molecules using THF, toluene, chloroform.</li><li>AppliChrom ABOA SuperOH-P Series for aqueous GPC/SEC-analysis of mainly neutral and anionic polymers like heparins, polysaccharides, PEO, PEG,....</li><li>AppliChrom® ABOA DMSO-Phil-P Series for DMSO GPC/SEC analysis (humic substances, UF/MUF-glue, p-NIPA, many polycondensates, protein from pea or leguminosae,...)</li><li>AppliChrom® ABOA DMAc-Phil-P Series for GPC/ SEC analysis in DMAc, DMF, NMP. Good for many medium polar substances, polyoxazolines, lignin,...</li><li>AppliChrom® ABOA Cat-Phil-P Series for aqueous GPC/SEC-analysis of special aminic and polycationic polymers like p-DADMAc, PEI/ polyethylenimin, chitosan, copolymers with polyaminofunctions, but also useful for polyanions or neutral polymers like heparin or PEO/PEG, dextran or pullulan.</li><li>Seperation Ranges: 100–50 000 000 Da</li></ul><h4>You decide between classical GPC/SEC columns with conventional mixed pore technology or AppliChrom® BPT technology:</h4>Separate oligomers and polymers with the new GPC media line from AppliChrom® BPT synthesis technology for large range, high resolution separations with increased accuracy in calibration (patent pending).<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg" alt="KNAUER: AppliChrom® ABOA columns." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg 245w," sizes="100vw" width="1379" height="718">

KNAUER AppliChrom® ABOA HFIP-Phil GPC Columns

AppliChrom® GPC columns for separations in HFIP with broad pore technology for GPC for analytes with challenging solution behavior

AppliChrom® GPC columns for separations in HFIP<h4>Properties:</h4><ul><li>Broad pore technology for GPC for analytes with challenging solution behavior</li><li>Separation range beween: 0.1–50 000 kDa</li><li>Range of individual porosities that can be used individually or in combination</li><li>Temperature stable between: 35–145 °C</li><li>Long column lifetime - result of the combination of optimized particle and packing technology</li><li>Low column bleed for low detector noise</li><li>Excellent reproducibility and resolution due to the advanced packing procedure</li><li>Calibration standard: PMMA or PEO &nbsp;</li><li>Recommended eluents: Hexafluoroisopropanol (HFIP), 0.1 % KTFa as modifier</li></ul><h4>Applications</h4>Crystalline highperformance polymers like:&nbsp;<ul><li>polyamides (PA), polyethylen terepthalate (PET), polybutylen terepthalate (PBT), polylactic acid (PLA), polyamid 6 (PA6), polycaprolactam, paraformaldehyde, polyoxymethylene (POM), polyacetal, several polyoxazolines</li></ul><h3>GPC &amp; SEC Columns</h3>GPC &amp; SEC systems offer solutions for various applications and laboratoriesGel permeation chromatography (GPC) and size exclusion chromatography (SEC) separate analytes by size using special columns with a porous matrix. The basic separation principle is based on the fact that smaller molecules penetrate these pores more strongly and therefore move more slowly through the matrix than larger molecules. GPC/SEC is often used as gentle and powerful purification technique or for quality control in research and development. Typical target molecules are polymers, dissolved in organic solvents for GPC, and macro biomolecules like proteins, antibodies or polysaccharides, dissolved in aqueous eluents for SEC.Separation is facilitated by selecting optimal particle and pore sizes. Therefore we offer a wide range of pore sizes (35, 100, 150, 250, 350, 500, 1000, 1500, 10E5, 10E6, 10E7 Å) and several particle sizes (5, 7, 10, 12, 20 µm) as a choice to customize for every application task.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Size_Exclusion_principle_2a432edcc1.webp" alt="KNAUER: Size Exclusion - principle" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Size_Exclusion_principle_2a432edcc1.webp 228w," sizes="100vw" width="1024" height="700"><h3>KNAUER AppliChrom® ABOA columns for aqueous SEC, organic GPC, and special applications</h3><ul><li>AppliChrom® ABOA StyDiViBe Series GPC-columns for GPC analysis of organic molecules using THF, toluene, chloroform.</li><li>AppliChrom ABOA SuperOH-P Series for aqueous GPC/SEC-analysis of mainly neutral and anionic polymers like heparins, polysaccharides, PEO, PEG,....</li><li>AppliChrom® ABOA DMSO-Phil-P Series for DMSO GPC/SEC analysis (humic substances, UF/MUF-glue, p-NIPA, many polycondensates, protein from pea or leguminosae,...)</li><li>AppliChrom® ABOA DMAc-Phil-P Series for GPC/ SEC analysis in DMAc, DMF, NMP. Good for many medium polar substances, polyoxazolines, lignin,...</li><li>AppliChrom® ABOA Cat-Phil-P Series for aqueous GPC/SEC-analysis of special aminic and polycationic polymers like p-DADMAc, PEI/ polyethylenimin, chitosan, copolymers with polyaminofunctions, but also useful for polyanions or neutral polymers like heparin or PEO/PEG, dextran or pullulan.</li><li>Seperation Ranges: 100–50 000 000 Da</li></ul><h4>You decide between classical GPC/SEC columns with conventional mixed pore technology or AppliChrom® BPT technology:</h4>Separate oligomers and polymers with the new GPC media line from AppliChrom® BPT synthesis technology for large range, high resolution separations with increased accuracy in calibration (patent pending).<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg" alt="KNAUER: AppliChrom® ABOA columns." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg 245w," sizes="100vw" width="1379" height="718">

KNAUER Sepapure® FPLC Columns for Antibody Affinity Chromatography

 The FPLC media is functionalized either with Protein A or Protein G ligands for the binding of antibodies or antibody fragments.

FPLC media based on cross-linked agarose beads with a mean diameter of 100 µm. &nbsp;The FPLC media is functionalized either with Protein A or Protein G ligands for the binding of antibodies or antibody fragments.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Antibody_Affinity_Protein_A_and_G_08afa2179e.webp" alt="KNAUER: FPLC Column for Antibody Affinity - Protein A and G" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Antibody_Affinity_Protein_A_and_G_08afa2179e.webp 236w," sizes="100vw" width="690" height="456"><h4>Properties:</h4>Sepapure® Affinity media for antibodies or antibody fragments is designed to be used with most aqueous buffer systems. It is long lasting when correctly handled and are compatible with common CIP strategies. All Sepapure® media is stored in 20 % ethanol upon delivery. Available as prepacked 1 ml or 5 ml cartridge or as bulk material.<h4>Technical data:</h4>Agarose beads with typical loading ranges of 1 - 30 mg/l (Protein A column) or 1 - 15 mg/ml (Protein G column). The maximum operating pressure the Sepapure® columns should be used at is 3 bar, while the recommended flowrate is 1 CV/ml.<h4>Recommended application areas:</h4>Typically used in the first step („capture“) of an FPLC purification procedure.<h3>KNAUER Sepapure®&nbsp;</h3>In protein purification, a combination of different methods is needed for a successful separation. The purity of the wanted biomolecule is increased in three steps: Capture - Intermediate - PolishingIn the “capture step” the crude biomolecule is extracted from major side products. In the “intermediate step” further contaminations are removed, and the highly pure biomolecule is gained in the “polishing step”. For each step a different method and therefore different columns are used.&nbsp;FPLC Sepapure® columns are dedicated for purification of biomolecules. Sepapure® media for affinity chromatography (AC) and Ion-Exchange chromatography (IEX) is based on Agarose and depending on the specific purification mode functionalized with ligands e.g. Protein A, Ni-NTA or quaternary ammonium (Q). These FPLC media are available packed in 1 ml and 5 ml cartridges or as bulk media.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_FPLC_Sepapure_columns_ad980345f3.jpg" alt="KNAUER: FPLC Sepapure® columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_FPLC_Sepapure_columns_ad980345f3.jpg 245w," sizes="100vw" width="1372" height="562"><h5>Physical properties FPLC Sepapure® columns</h5><ul><li>Resin 100 µm Agarose particles with 4 % or 6 % crosslinking</li><li>Flowrate Recommended: 1 CV/ml</li><li>pH Stability 3 – 9 long term</li><li>Max. pressure 3 bar</li></ul>Sepapure® Desalting columns are based on Dextran with an exclusion limit of 5 kDa and available in 1 ml and 5 ml cartridges.&nbsp;<h5>Physical properties Sepapure® Desalting columns</h5><ul><li>Resin 20 – 50 µm Dextran particles</li><li>Flowrate Recommended: 1 CV/ml</li><li>Exclusion limit 5 kDa</li><li>Max. pressure 3 bar</li></ul>

KNAUER Sepapure® FPLC Columns for Tag-Affinity Chromatography

FPLC media based on cross-linked agarose beads with a mean diameter of 100 µm.  The FPLC media is functionalized with NTA ligands for His-Tag.

FPLC media based on cross-linked agarose beads with a mean diameter of 100 µm. &nbsp;The FPLC media is functionalized with NTA ligands for His-Tag.&nbsp;<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Antibody_Affinity_Protein_A_and_G_08afa2179e.webp" alt="KNAUER: FPLC Column for Tag-Affinity Chromatography" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Antibody_Affinity_Protein_A_and_G_08afa2179e.webp 236w," sizes="100vw" width="690" height="456"><h4>Properties:</h4>Sepapure® Affinity media for recombinantly tagged proteins is designed to be used with most aqueous buffer systems. It is long lasting when correctly handled and compatible with common CIP strategies. All Sepapure® media is stored in 20 % ethanol upon delivery. Available as prepacked 1 ml or 5 ml cartridge or as bulk material.<h4>Technical data:</h4>Agarose beads with typical loading ranges of 1–40 mg/l (Ni-NTA). The maximum operating pressure the Sepapure® columns should be used at is 3 bar, while the recommended flowrate is 1 CV/ml. &nbsp;Available as prepacked 1 ml or 5 ml cartridge or as bulk material.<h4>Recommended application areas:</h4>Typically used in the first step („capture“) of an FPLC purification procedure.<h3>KNAUER Sepapure®&nbsp;</h3>In protein purification, a combination of different methods is needed for a successful separation. The purity of the wanted biomolecule is increased in three steps: Capture - Intermediate - PolishingIn the “capture step” the crude biomolecule is extracted from major side products. In the “intermediate step” further contaminations are removed, and the highly pure biomolecule is gained in the “polishing step”. For each step a different method and therefore different columns are used.&nbsp;FPLC Sepapure® columns are dedicated for purification of biomolecules. Sepapure® media for affinity chromatography (AC) and Ion-Exchange chromatography (IEX) is based on Agarose and depending on the specific purification mode functionalized with ligands e.g. Protein A, Ni-NTA or quaternary ammonium (Q). These FPLC media are available packed in 1 ml and 5 ml cartridges or as bulk media.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_FPLC_Sepapure_columns_ad980345f3.jpg" alt="KNAUER: FPLC Sepapure® columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_FPLC_Sepapure_columns_ad980345f3.jpg 245w," sizes="100vw" width="1372" height="562"><h5>Physical properties FPLC Sepapure® columns</h5><ul><li>Resin 100 µm Agarose particles with 4 % or 6 % crosslinking</li><li>Flowrate Recommended: 1 CV/ml</li><li>pH Stability 3 – 9 long term</li><li>Max. pressure 3 bar</li></ul>Sepapure® Desalting columns are based on Dextran with an exclusion limit of 5 kDa and available in 1 ml and 5 ml cartridges.&nbsp;<h5>Physical properties Sepapure® Desalting columns</h5><ul><li>Resin 20 – 50 µm Dextran particles</li><li>Flowrate Recommended: 1 CV/ml</li><li>Exclusion limit 5 kDa</li><li>Max. pressure 3 bar</li></ul>

KNAUER Sepapure® FPLC Columns for Ion-Exchange Chromatography

The FPLC media is functionalized with different linkers ranging from strong anion exchange ligands to weak cation exchange ligands. 

FPLC media based on cross-linked agarose beads with a mean diameter of 100 µm. &nbsp;The FPLC media is functionalized with different linkers ranging from strong anion exchange ligands to weak cation exchange ligands.&nbsp;<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Ion_Exchange_Chromatography_640e6f5ba7.jpg" alt="KNAUER: Sepapure FPLC Columns for Ion Exchange Chromatography" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Ion_Exchange_Chromatography_640e6f5ba7.jpg 236w," sizes="100vw" width="1920" height="1270"><h4>Properties:</h4>Sepapure® Ion-Exchange media is designed to be used with most aqueous buffer systems. It is long lasting when correctly handled and is compatible with common CIP strategies. All Sepapure® media is stored in 20 % ethanol upon delivery. &nbsp;<h4>Technical data:</h4>The agarose beads are functionalized with a quaternary ammonium for the strong anion exchanger (Q) and with diethylaminoethyl for the weak anion exchanger (DEAE). The strong cation exchanger is functionalized with sulphopropyl (SP) and the weak cation exchanger with carboxymethyl (CM).&nbsp;The maximum operating pressure the Sepapure® columns should be used at is 3 bar, while the recommended flowrate is 1 CV/ml.&nbsp;Available as prepacked 1 ml or 5 ml cartridge or as bulk material.&nbsp;<h4>Recommended application areas:</h4>Typically used in the intermediate step of an FPLC purification procedure.<h3>KNAUER Sepapure®&nbsp;</h3>In protein purification, a combination of different methods is needed for a successful separation. The purity of the wanted biomolecule is increased in three steps: Capture - Intermediate - PolishingIn the “capture step” the crude biomolecule is extracted from major side products. In the “intermediate step” further contaminations are removed, and the highly pure biomolecule is gained in the “polishing step”. For each step a different method and therefore different columns are used.&nbsp;FPLC Sepapure® columns are dedicated for purification of biomolecules. Sepapure® media for affinity chromatography (AC) and Ion-Exchange chromatography (IEX) is based on Agarose and depending on the specific purification mode functionalized with ligands e.g. Protein A, Ni-NTA or quaternary ammonium (Q). These FPLC media are available packed in 1 ml and 5 ml cartridges or as bulk media.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_FPLC_Sepapure_columns_ad980345f3.jpg" alt="KNAUER: FPLC Sepapure® columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_FPLC_Sepapure_columns_ad980345f3.jpg 245w," sizes="100vw" width="1372" height="562"><h5>Physical properties FPLC Sepapure® columns</h5><ul><li>Resin 100 µm Agarose particles with 4 % or 6 % crosslinking</li><li>Flowrate Recommended: 1 CV/ml</li><li>pH Stability 3 – 9 long term</li><li>Max. pressure 3 bar</li></ul>Sepapure® Desalting columns are based on Dextran with an exclusion limit of 5 kDa and available in 1 ml and 5 ml cartridges.&nbsp;<h5>Physical properties Sepapure® Desalting columns</h5><ul><li>Resin 20 – 50 µm Dextran particles</li><li>Flowrate Recommended: 1 CV/ml</li><li>Exclusion limit 5 kDa</li><li>Max. pressure 3 bar</li></ul>

KNAUER Sepapure® FPLC Desalting Columns

Desalting columns based on dextran for group separations of large molecular weight biomolecules from small molecular weight compounds and salts.

FPLC media based on dextran beads with a mean diameter of 20–50 µm. Size exclusion chromatography (SEC) separates molecules on the basis of size differences. KNAUER offers desalting columns based on dextran for group separations of large molecular weight biomolecules from small molecular weight compounds and salts.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Size_Exclusion_chromatography_fb9d43e34b.jpg" alt="KNAUER: Sepapure FPLC - Desalting or Buffer Exchange" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Size_Exclusion_chromatography_fb9d43e34b.jpg 156w," sizes="100vw" width="1500" height="1500"><h4>Properties:</h4>Sepapure® Desalting media is designed to be used for removal of small molecules below the exclusion limit and for covenient rebuffering. It is long lasting when correctly handled and compatible with common CIP strategies. All Sepapure® media is stored in 20 % ethanol upon delivery. Available as prepacked 5 ml cartridge or as bulk material.&nbsp;<h4>Technical data:</h4>The Sepapure® dextran beads have an exclusion limit of 5 kDa. The maximum operating pressure of the Sepapure® columns is 3 bar, while the recommended flowrate is 1 CV/ml.<h4>Recommended application areas:</h4>Typically used in the final step of an FPLC purification procedure or inbetween steps for fast buffer exchange.<h3>KNAUER Sepapure®&nbsp;</h3>In protein purification, a combination of different methods is needed for a successful separation. The purity of the wanted biomolecule is increased in three steps: Capture - Intermediate - PolishingIn the “capture step” the crude biomolecule is extracted from major side products. In the “intermediate step” further contaminations are removed, and the highly pure biomolecule is gained in the “polishing step”. For each step a different method and therefore different columns are used.&nbsp;FPLC Sepapure® columns are dedicated for purification of biomolecules. Sepapure® media for affinity chromatography (AC) and Ion-Exchange chromatography (IEX) is based on Agarose and depending on the specific purification mode functionalized with ligands e.g. Protein A, Ni-NTA or quaternary ammonium (Q). These FPLC media are available packed in 1 ml and 5 ml cartridges or as bulk media.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_FPLC_Sepapure_columns_ad980345f3.jpg" alt="KNAUER: FPLC Sepapure® columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_FPLC_Sepapure_columns_ad980345f3.jpg 245w," sizes="100vw" width="1372" height="562"><h5>Physical properties FPLC Sepapure® columns</h5><ul><li>Resin 100 µm Agarose particles with 4 % or 6 % crosslinking</li><li>Flowrate Recommended: 1 CV/ml</li><li>pH Stability 3 – 9 long term</li><li>Max. pressure 3 bar</li></ul>Sepapure® Desalting columns are based on Dextran with an exclusion limit of 5 kDa and available in 1 ml and 5 ml cartridges.&nbsp;<h5>Physical properties Sepapure® Desalting columns</h5><ul><li>Resin 20 – 50 µm Dextran particles</li><li>Flowrate Recommended: 1 CV/ml</li><li>Exclusion limit 5 kDa</li><li>Max. pressure 3 bar</li></ul>

Products from category HPLC columns from KNAUER - page 4

Related content

News from LabRulezLCMS Library - Week 21, 2026

Let´s Connect a whole (U)HPLC system without tools and trouble

How to Cut HPLC Sample Preparation Time for Derivatizing Amino Acids