<p><strong>This workflow confirms and quantifies 31 drugs of abuse in oral fluid (including THC) in a 4.5‑minute LC run on the </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1149"><strong>Thermo Scientific Stellar mass spectrometer</strong></a><strong> using full scan + targeted MS2 (tMS2) with both HCD and CID fragmentation. With 1 µL injection and 0.1% formic acid in water/methanol mobile phases, the method supports ~13 samples/hour (up to ~320/day continuous operation) while maintaining confirmation performance via ion ratios.</strong></p><blockquote><h5><strong>Method at a glance</strong></h5><ul><li><strong>What matrix is tested?</strong> Oral fluid</li><li><strong>How many drugs?</strong> 31 drugs of abuse (panel includes THC)</li><li><strong>Run time?</strong> 4.5 minutes</li><li><strong>Throughput?</strong> ~13 samples/hour → up to ~320 samples/day (24‑hour operation)</li><li><strong>Injection volume?</strong> 1 µL</li><li><strong>Mobile phases?</strong> 0.1% formic acid in water (A) and 0.1% formic acid in methanol (B)</li><li><strong>MS acquisition?</strong> Full scan + targeted MS2 (tMS2)</li><li><strong>Fragmentation?</strong> Compound‑optimized <strong>HCD</strong> and <strong>CID</strong> in the same targeted list</li><li><strong>Confirmation strategy?</strong> Ion ratios with ±20% tolerance (typical confirmatory approach)</li></ul></blockquote><h3><strong>Why oral fluid—and why speed matters</strong></h3><p>Oral fluid is attractive for clinical and forensic toxicology because collection is simple and the matrix aligns well with high‑volume workflows (workplace/occupational, roadside, and other settings). The challenge is building a method that’s simultaneously:</p><ul><li><strong>Broad enough</strong> for today’s drug panels</li><li><strong>Sensitive enough</strong> to reach required cutoffs</li><li><strong>Fast enough</strong> to keep sample queues under control</li><li><strong>Confirmation‑ready</strong> (consistent product ions and ion ratios)</li></ul><p>A <strong>4.5‑minute</strong> method is a practical lever here: compress runtime, raise throughput, and still keep confirmation quality by optimizing MS/MS conditions per compound.</p><h3><strong>The LC method</strong></h3><p>A short, efficient separation is the foundation of the workflow:</p><ul><li><strong>UHPLC system:</strong> <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/744"><strong>Thermo Scientific Vanquish Horizon UHPLC</strong></a></li><li><strong>Column:</strong> <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/424"><strong>Thermo Scientific Accucore Biphenyl</strong></a>, 50 × 2.1 mm, 2.6 µm</li><li><strong>Mobile phase A:</strong> 0.1% formic acid in water</li><li><strong>Mobile phase B:</strong> 0.1% formic acid in methanol</li><li><strong>Injection volume:</strong> <strong>1 µL</strong></li><li><strong>Gradient runtime:</strong> <strong>4.5 minutes</strong></li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Fisher_Scientific_4_5_Minute_Oral_Fluid_LC_MS_Method_to_Detect_31_Drugs_of_Abuse_Using_Stellar_MS_fd3f3e8ea4.jpg" alt="Thermo Fisher Scientific: 4.5-Minute Oral Fluid LC MS Method to Detect 31 Drugs of Abuse Using Stellar MS: Figure 1: Thermo Scientific Vanquish Horizon UHPLC system." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Fisher_Scientific_4_5_Minute_Oral_Fluid_LC_MS_Method_to_Detect_31_Drugs_of_Abuse_Using_Stellar_MS_fd3f3e8ea4.jpg 120w," sizes="100vw" width="747" height="969"></p><h3><strong>The MS method (Full scan + targeted MS<sup>2</sup> with HCD + CID)</strong></h3><h5><strong>Acquisition approach</strong></h5><p>This method uses a “two‑layer” strategy for quantitation + confirmation:</p><ol><li><strong>Full scan</strong> (broad coverage, context, quantitative support)</li><li><strong>Targeted MS<sup>2</sup> (tMS2)</strong> (confirmation‑focused product ions, ion ratios)</li></ol><h5><strong>The key differentiator: HCD and CID in one targeted list</strong></h5><p>Instead of forcing every analyte into a single fragmentation style, the method uses both:</p><ul><li><strong>HCD</strong> (beam‑type fragmentation)</li><li><strong>CID</strong> (resonance‑type fragmentation)</li></ul><h5><strong>Why that improves method development:</strong></h5><p>Drugs of abuse span multiple chemistries. A single collision approach often works “okay” for most compounds—but one or two analytes can become persistent problems (weak qualifiers, unstable ion ratios, excess noise). Having both <strong>HCD and CID</strong> available in one method lets you optimize per compound and move faster.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Fisher_Scientific_4_5_Minute_Oral_Fluid_LC_MS_Method_to_Detect_31_Drugs_of_Abuse_Using_Stellar_MS_3_e4a95651a2.jpg" alt="Thermo Fisher Scientific: 4.5-Minute Oral Fluid LC MS Method to Detect 31 Drugs of Abuse Using Stellar MS: Figure 2: Thermo Scientific Stellar mass spectrometer." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Fisher_Scientific_4_5_Minute_Oral_Fluid_LC_MS_Method_to_Detect_31_Drugs_of_Abuse_Using_Stellar_MS_3_e4a95651a2.jpg 245w," sizes="100vw" width="645" height="377"></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Fisher_Scientific_4_5_Minute_Oral_Fluid_LC_MS_Method_to_Detect_31_Drugs_of_Abuse_Using_Stellar_MS_5_88276eec6a.jpg" alt="Thermo Fisher Scientific: 4.5-Minute Oral Fluid LC MS Method to Detect 31 Drugs of Abuse Using Stellar MS: Figure 3: Full scan &amp; targeted MS2 methods, HCD and collision energies used." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Fisher_Scientific_4_5_Minute_Oral_Fluid_LC_MS_Method_to_Detect_31_Drugs_of_Abuse_Using_Stellar_MS_5_88276eec6a.jpg 245w," sizes="100vw" width="768" height="279"></p><h3><strong>Why CID + HCD flexibility improves confirmation</strong></h3><p>In this workflow, <strong>HCD</strong> performed well for most compounds. But for <strong>buprenorphine</strong>, HCD produced one dominant product ion with additional low m/z noise and noticeable residual precursor. Using <strong>CID</strong> generated two high‑intensity product ions and delivered <strong>consistent ion ratios</strong> across the calibration range.</p><p>When your confirmation hinges on stable ion ratios, the ability to switch fragmentation mode (not just collision energy) is a method‑development advantage—especially for “problem analytes.”</p><h3><strong>Controllable ionization</strong></h3><p>Oral fluid methods often deal with limited sample volume and matrix effects. This workflow pairs low injection volume with ionization control using the Thermo Scientific OptaMax Plus HESI source.</p><ul><li>The OptaMax Plus HESI source supports high probe temperature capability (up to 650 °C).</li><li>In this study, a vaporizer temperature of 500 °C was used to help achieve sensitivity and improve relative peak areas across drugs of abuse.</li></ul><p><strong>Why this matters:</strong> If you’re injecting only 1 µL, ionization stability and efficiency can be the difference between “meets cutoff” and “misses at LOQ.”</p><h3><strong>Sample preparation</strong></h3><p>Oral fluid panels become more challenging when THC is included because most drugs of abuse are basic, while THC is largely neutral, and that can stress extraction chemistry.</p><p>In this workflow, oral fluid calibrators and samples were extracted using a mixed‑mode approach designed to recover THC alongside other drugs:</p><ul><li>Calibrators prepared across eight levels (broad dynamic range)</li><li>Extraction performed using mixed‑mode chemistry tips (SCX/WAX) in a dispersive SPE‑style workflow</li><li>Steps automated on a liquid handling platform to support high‑throughput consistency</li><li>Samples dried and reconstituted prior to LC‑MS analysis</li><li>Only 1 µL injected per run</li></ul><p>Even if your lab uses different automation or consumables, the method structure (fast LC + full scan + targeted MS2 with dual fragmentation) transfers well.</p><blockquote><h5><strong>Throughput math</strong></h5><ul><li><strong>4.5 minutes per injection</strong> → 60 / 4.5 = <strong>13.3 injections/hour</strong></li><li>That’s <strong>~13 samples/hour</strong> in typical phrasing</li><li>Over 24 hours: 13.3 × 24 = <strong>~320 samples/day</strong> (continuous operation)</li></ul><p>If you run a single shift, just scale accordingly (e.g., ~106/day for an 8‑hour shift, excluding QC and overhead).</p></blockquote><h3>Performance summary</h3><h5><strong>Sensitivity and linearity</strong></h5><ul><li><strong>Linearity</strong> from LOQs as low as <strong>0.25 ng/mL</strong> up to <strong>1,000 ng/mL</strong> (panel-dependent)</li><li>For THC specifically: <strong>LOQ at 1 ng/mL</strong>, with a dynamic range extending to <strong>1,000 ng/mL</strong> in this evaluation</li><li>Across the panel, LOQs were reported as <strong>lower than recommended confirmation cutoffs</strong> referenced in SAMHSA guidance and NSC Tier 1 cutoffs (study-specific outcome)</li></ul><h5><strong>Confirmation via ion ratios</strong></h5><ul><li>Ion ratios evaluated using <strong>±20% tolerance</strong> (typical confirmatory acceptance framework)</li><li>The workflow produced <strong>consistent ion ratios across calibrator levels</strong> for the full panel in this evaluation</li></ul><h5><strong>Case sample comparison (real-world relevance)</strong></h5><p>When compared against a validated triple quadrupole method for case study samples, the Stellar MS workflow:</p><ul><li>Confirmed the positive hits observed by the reference method</li><li>Reported a few additional positives for select analytes, attributed to lower LOQs</li><li>Highlighted an operational efficiency point: <strong>1 µL injection</strong> in this method versus <strong>20 µL injection</strong> in the compared method</li></ul><h3><strong>FAQ</strong></h3><div><div><ol><li><strong>How long does the LC‑MS run take for the 31‑drug oral fluid panel?</strong><br><strong>4.5 minutes per injection</strong> using a short UHPLC gradient.<br>&nbsp;</li><li><strong>How many drugs of abuse can Stellar MS detect in this workflow?</strong><br><strong>31 drugs of abuse</strong>, including <strong>THC</strong>, using full scan + targeted MS2.<br>&nbsp;</li><li><strong>What MS/MS approach is used?</strong><br>A combined strategy: <strong>full scan</strong> plus <strong>targeted MS2 (tMS2)</strong> for confirmation.<br>&nbsp;</li><li><strong>Why use both HCD and CID?</strong><br>Because some analytes fragment better—and produce more stable confirmation ions/ion ratios—under one mode versus the other. Using both increases flexibility and speeds method optimization.<br>&nbsp;</li><li><strong>What injection volume is used?</strong><br><strong>1 µL</strong> of extracted sample.<br>&nbsp;</li><li><strong>What mobile phases are used?</strong><br><strong>0.1% formic acid in water (A)</strong> and <strong>0.1% formic acid in methanol (B)</strong>.<br>&nbsp;</li><li><strong>How many samples can you run per day?</strong><br>At 4.5 minutes/injection, throughput is <strong>~13 samples/hour</strong> or <strong>up to ~320/day</strong> with continuous operation (actual throughput depends on QC and scheduling).</li></ol></div></div><h3><strong>What makes this workflow “easy” to develop on Stellar MS</strong></h3><p>Here’s the short list of features that directly reduce method‑development friction:</p><ul><li><strong>HCD or CID</strong> in one method → optimize per compound, not compromise</li><li><strong>Fast MS2 acquisition speeds</strong> (up to 140 Hz for MS2) → more data points across narrow peaks</li><li><strong>Fast polarity switching</strong> (true 5 ms) → supports mixed panels efficiently</li><li><strong>Adaptive RT</strong> (real‑time retention time window adjustment) → helps reduce reinjections when retention times drift (e.g., column aging) and supports method transfer from longer to shorter gradients</li><li><strong>OptaMax Plus HESI</strong> source control → supports sensitivity at low injection volumes</li></ul><p><i>If you’re building a fast oral fluid confirmation workflow—or updating an existing DOA panel—this 4.5‑minute method shows how Stellar MS can combine <strong>speed, confirmation-ready MS2, and fragmentation flexibility (HCD + CID)</strong> in a single targeted workflow. Reach out to learn how to adapt the targeted list, collision settings, and scheduling strategy to your lab’s cutoffs and throughput goals.</i></p><blockquote><p><strong>Visit us on&nbsp;</strong><a target="_blank" rel="noopener noreferrer" href="https://www.linkedin.com/showcase/72003132/admin/dashboard/"><strong><u>LinkedIn:</u></strong></a><strong>&nbsp;</strong>#MassSpectrometry #OralFluid #DrugsOfAbuse #MethodDevelopment #HighThroughput</p></blockquote>

4.5-Minute Oral Fluid LC MS Method to Detect 31 Drugs of Abuse Using Stellar MS

<p><strong>In our </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/article/7741"><strong>previous article, we introduced the main types of detectors used in HPLC</strong></a><strong>. This time, we take a closer look at the performance characteristics of LC detectors and the specifications that should be considered when assessing whether a detector is suitable for a particular chromatographic separation. We will also compare the most common detector technologies and provide some practical guidance for choosing the right option for a specific application.</strong></p><h3><strong>What Defines an Ideal HPLC Detector?</strong></h3><p>With such a wide variety of HPLC detectors available, an obvious question arises: why is there no single detector that works for every application? The simple answer is that no detector can satisfy every analytical requirement at the same time. Nevertheless, most detector designs aim to achieve a similar set of desirable properties.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Figure_1_Detector_requirements_334605c913.webp" alt="KNAUER: Figure 1 - Detector requirements" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Figure_1_Detector_requirements_334605c913.webp 245w," sizes="100vw" width="1024" height="384"></p><h4><strong>1. High Sensitivity – Detecting Very Small Amounts</strong></h4><p>An ideal detector should be capable of measuring very low quantities of analyte, often in the nanogram or even picogram range. High sensitivity leads to lower limits of detection (LOD), can reduce sample preparation requirements, and is particularly valuable for applications such as impurity analysis or pharmacokinetic studies.</p><p>Some detector technologies, including fluorescence detection (FLD), electrochemical detection (ECD), and mass spectrometry (MS), can achieve extremely high sensitivity. However, this level of performance is often limited to specific classes of compounds.</p><h4><strong>2. Good Selectivity or Broad Applicability – Knowing What Is Being Detected</strong></h4><p>Selectivity describes how effectively a detector responds to the target analyte while minimizing interference from the sample matrix or mobile phase.</p><p>Depending on the analytical task, a detector may need to be highly selective, responding only to compounds with specific characteristics such as fluorescence or electrochemical activity. In other cases, broader applicability may be more important, allowing a wide range of compounds to be detected regardless of their molecular structure.</p><h4><strong>3. Linear Response and Broad Dynamic Range – Reliable Quantification</strong></h4><p>A good detector should provide a linear response across a sufficiently wide concentration range. This makes it possible to accurately quantify both major components and trace impurities within the same analytical method.</p><p>A broad linear range simplifies calibration and improves confidence in quantitative results. Detector response should also remain highly reproducible from one injection to another.</p><h4><strong>4. Compatibility with HPLC Conditions – Fitting the Chromatographic Method</strong></h4><p>An ideal detector should be compatible with both gradient and isocratic elution, commonly used mobile phases and additives, typical flow rates, and standard HPLC operating temperatures.</p><p>Poor compatibility may restrict method flexibility or force compromises in chromatographic performance. Some detectors provide excellent analytical performance but only under specific operating conditions, making them less suitable for certain methods.</p><h4><strong>5. Stability and Low Noise – Distinguishing Signal from Background</strong></h4><p>A stable baseline with minimal noise and drift improves the signal-to-noise ratio and overall data quality. This becomes especially important in long chromatographic runs, gradient methods, and trace-level analysis.</p><p>Lower baseline noise makes weak analyte signals easier to distinguish and directly contributes to improved detection limits.</p><h4><strong>6. Robustness, Ease of Use, and Maintenance – Supporting Routine Laboratory Work</strong></h4><p>For day-to-day use, a detector should be reliable over long sequences, straightforward to operate, and require as little maintenance as possible.</p><p>In routine laboratories, robustness and ease of operation can be just as important as analytical performance. Simple troubleshooting, low maintenance requirements, and limited consumable costs are major advantages, particularly in high-throughput environments.</p><h3><strong>The Reality: No Detector Offers Everything</strong></h3><p>Since no detector fulfils all these requirements perfectly, detector selection is inevitably a compromise between sensitivity, selectivity, universality, robustness, operating flexibility, and cost.</p><p>For this reason, multi-detector configurations are increasingly common in modern HPLC systems. Combinations such as UV + CAD or UV + MS make it possible to benefit from complementary detection principles within a single analytical workflow.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Table_1_Comparison_of_commonly_used_HPLC_detector_classes_d74817b0f0.jpg" alt="KNAUER: Table 1 - Comparison of commonly used HPLC detector classes." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Table_1_Comparison_of_commonly_used_HPLC_detector_classes_d74817b0f0.jpg 113w," sizes="100vw" width="806" height="1115"></p><h3><strong>Critical Performance Parameters of HPLC Detectors</strong></h3><h4><strong>Data Sampling Rate</strong></h4><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Figure_2_Example_for_too_less_and_too_high_data_sampling_rate_741a53edc6.webp" alt="KNAUER: Figure 2 - Example for too less and too high data sampling rate." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Figure_2_Example_for_too_less_and_too_high_data_sampling_rate_741a53edc6.webp 245w," sizes="100vw" width="1024" height="410"></p><p>The data acquisition rate, also known as the sampling rate, is one of the most important detector settings in HPLC. It describes how many data points are recorded per second and directly influences peak representation, peak shape, area precision, and baseline noise.</p><p>The higher the sampling rate, the more data points are collected. The detector processes the measurements collected over a defined time interval and averages them, and these averaged points are then used to construct the chromatogram.</p><p>At a data rate of 5 Hz, for example, five data points are acquired every second. If too few points are collected across a chromatographic peak, the resulting peak can appear jagged, poorly defined, and analytically unreliable, as illustrated on the left side of Figure 2.</p><p>At the other extreme, a setting such as 100 Hz records 100 points each second, which is often unnecessarily high for conventional HPLC. The optimum sampling rate mainly depends on chromatographic peak width.</p><p>For most standard HPLC applications, a data rate of approximately <strong>10 to 20 Hz</strong> is sufficient to generate a smooth and symmetrical Gaussian peak.</p><p>One consequence of using an excessively high acquisition rate is increased baseline noise. Statistically, the noise of the system depends on the number of data points used for averaging and decreases with the square root of the number of averaged measurements.</p><p>Selecting an appropriate sampling rate is therefore a balance between collecting enough points to describe the chromatographic peak accurately and avoiding unnecessary noise.</p><h4><strong>Noise and Drift</strong></h4><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Figure_3_Baseline_noise_and_drift_685652e641.webp" alt="KNAUER: Figure 3 - Baseline noise and drift" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Figure_3_Baseline_noise_and_drift_685652e641.webp 245w," sizes="100vw" width="1024" height="400"></p><p>What exactly is baseline noise? In simple terms, it represents the short-term fluctuations of the detector baseline over a defined period and is expressed in the units appropriate for the particular detector.</p><p>Baseline noise is typically determined from the peak-to-peak variation of the detector signal while the mobile phase passes through the system.</p><p>All HPLC detectors exhibit a certain level of noise. Potential sources include:</p><ul><li>electronic noise,</li><li>detector cell noise,</li><li>detector instability,</li><li>temperature fluctuations,</li><li>mobile-phase effects,</li><li>and other environmental or instrumental influences.</li></ul><p>Noise directly affects detector sensitivity because it determines the <strong>signal-to-noise ratio (S/N)</strong>.</p><p>A chromatographic peak is generally considered reliably detectable when its height is at least three times greater than the calculated baseline noise. This relationship is commonly used to define the <strong>limit of detection (LOD)</strong>.</p><p>The <strong>limit of quantification (LOQ)</strong> requires a stronger signal and is typically defined as approximately ten times the baseline noise.</p><p>Another important parameter affecting sensitivity is baseline drift. Drift reflects the gradual change in detector response over time and therefore provides useful information about long-term detector stability.</p><p>It is helpful to distinguish between short-term peak-to-peak noise and longer-term baseline drift over a defined time interval. Drift can be described as the average slope or change of the baseline within a specific period.</p><p>Excessive drift may reduce sensitivity and complicate chromatographic peak integration.</p><p>Short-term baseline instability can be influenced by contamination or deterioration of detector components, while long-term drift is often related to temperature stability, detector equilibration, or changes occurring within the analytical system.</p><h3><strong>How to Select the Right HPLC Detector</strong></h3><p>There is no universally “best” HPLC detector. The correct detector is simply the one that best matches the analytical task.</p><p>When selecting a detector, several practical questions can help narrow the choice.</p><h4><strong>1. Does the analyte absorb UV light or fluoresce?</strong></h4><p>If the answer is yes, optical detectors such as <strong>UV/VIS</strong> or <strong>FLD</strong> are often the simplest and most effective options.</p><p>UV/VIS detection is widely applicable to compounds containing suitable chromophores, while fluorescence detection provides particularly high sensitivity and selectivity for naturally fluorescent or derivatized analytes.</p><h4><strong>2. Does the analyte lack a chromophore?</strong></h4><p>If UV absorption is weak or absent, detectors such as <strong>RID, ELSD, or CAD</strong> may provide a more appropriate solution.</p><p>These detector types are useful for compounds such as sugars, lipids, polymers, and other analytes that are difficult to monitor by conventional UV detection.</p><h4><strong>3. Is structural information required?</strong></h4><p>If structural information is important, <strong>mass spectrometry</strong> is usually the strongest choice.</p><p>MS provides mass-to-charge information and, when tandem mass spectrometry is used, fragmentation data that can support compound identification and structural characterization.</p><h4><strong>4. Is extremely high sensitivity necessary?</strong></h4><p>For applications requiring very low detection limits, <strong>electrochemical detection</strong> or <strong>mass spectrometry</strong> may be the most suitable options.</p><p>The exact choice depends on the chemical properties of the analyte and the required degree of selectivity.</p><h4><strong>5. Are macromolecules such as proteins or polymers being investigated?</strong></h4><p>For characterization of macromolecules, <strong>MALS</strong> and <strong>viscometry</strong> can provide valuable information about molecular weight, molecular size, branching, and aggregation.</p><p>These techniques are especially powerful when combined with size-exclusion chromatography and can provide information that is not based solely on column elution behavior.</p><p>For a more detailed discussion of detector selection, see the KNAUER blog article <i>“The way you look at it – A comprehensive guide for selecting the appropriate HPLC detector.”</i></p><p>Choosing the detection technology based on analyte properties, required sensitivity, chromatographic conditions, and the type of information needed is essential for obtaining reliable and meaningful HPLC results.</p><h3><strong>Final Thoughts</strong></h3><p>Understanding the desired characteristics and key performance parameters of HPLC detectors helps explain why different detector technologies are suited to different applications.</p><p>No single detector can provide maximum sensitivity, selectivity, universality, robustness, flexibility, and low operating cost simultaneously. Recognizing these trade-offs provides a practical framework for selecting the most appropriate detector for a given chromatographic method.</p><p>Parameters such as data sampling rate, baseline noise, drift, dynamic range, and compatibility with chromatographic conditions are just as important as the underlying detection principle itself.</p><p>In the next articles of this series, we will take a closer look at the individual HPLC detection technologies, beginning with the most widely used optical detection method: <strong>UV/VIS detection</strong>.</p>

Seeing is Believing – Detection Made Easy Part 2: Detector Characteristics

<p><strong>Our Library never stops expanding. What are the most recent contributions to LabRulezLCMS Library in the week of 17th August 2026? Check out new documents from the field of liquid phase, especially HPLC and LC/MS techniques!</strong></p><blockquote><p><span style="font-size:20px;">👉 </span><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library"><span style="font-size:20px;"><strong>SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT LCMS AND RELATED TECHNIQUES</strong></span></a></p></blockquote><blockquote><p><strong>👉 Need info about different analytical techniques?</strong> Peek into <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library"><strong>LabRulezGCMS</strong></a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library"><strong>LabRulezICPMS</strong></a> libraries.</p></blockquote><p>This week we bring you posters by <strong>Agilent Technologies / ASMS, Thermo Fisher Scientific / ASMS </strong>and<strong> Shimadzu / ASMS </strong>and application note by<strong> Waters Corporation!</strong></p><h3><strong>1. Agilent Technologies / ASMS: Quantitation of N-Nitroso Duloxetine N-Nitrosamine Drug Substance Related Impurities (NDSRI) in API and Formulation by 6475 LC/TQ</strong></h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/po_drug_impurities_lc_tq_tp_402_asms_2026_en_agilent_b933b9bddf.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Nitrosamine impurities are nitroso derivatives where the nitroso group is attached to an amine. The active pharmaceutical ingredient (API) derived from a class of nitrosamines are known as N-nitrosamine drugsubstance-related impurities (NDSRI). Nitrosamine impurities in APIs and drug products pose safety concerns, even in small quantities, and thus are a major concern for drug makers [1].&nbsp;</p><p>Analytical methods must be sufficiently sensitive to quantify the nitrosamine of interest at levels as low as 10% of the specification limit and, where feasible, down to ≤5% of the specification limit, for the determination of the limit of detection. LC/MS/MS is an inherently selective and highly sensitive analytical technique that is well suited for the identification and quantification of trace-level impurities at extremely low concentrations. Consequently, LC/MS/MS has been widely adopted within the pharmaceutical industry, particularly for nitrosamine analysis [2-3].&nbsp;</p><p>Therefore, manufacturers must develop and qualify a dedicated analytical method that is appropriate for the specific sample matrix and targeted NDSRIs. An LC/MS/MS method based on multiple reaction monitoring (MRM) was developed for the detection and quantification of the N-nitroso duloxetine NDSRI impurity over a concentration range of 0.5 to 40 ppb (absolute standard concentration), using an atmospheric pressure chemical ionization (APCI) source on an Agilent 6475A LC/TQ instrument.</p><h4><strong>Experimental</strong></h4><ul><li><strong>MS:</strong> <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=6475"><strong>6475 Triple Quadrupole LC/MS System</strong></a></li><li><strong>Column:</strong> <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=Poroshell+HPH+C18"><strong>Poroshell HPH C18</strong></a> (4.6*150mm, 2.7µm)</li></ul><h4><strong>Conclusions</strong></h4><ul><li>A highly sensitive and robust MRM LC/MS/MS method was developed for the quantitation of N-nitroso duloxetine in duloxetine hydrochloride API and finished formulation using the Agilent 6475A LC/TQ.&nbsp;</li><li>The optimized chromatographic conditions provided effective separation of the analyte from the API, placebo, and formulation matrices, ensuring reliable quantitation.&nbsp;</li><li>The calibration curve was linear over the concentration range of 0.5-40 ng/mL, with 1/x weighting. R and R2 values were observed for both to be greater than 0.99.&nbsp;</li><li>Recovery studies demonstrated efficient sample extraction, with recoveries ranging from 92-99% in API samples and 109-116% in pellet formulations at the LOQ, specification, and 200% specification levels.&nbsp;</li><li>The method also showed excellent reproducibility across all evaluated concentration levels, confirming its suitability for routine analysis.</li></ul><h3><strong>2. Shimadzu / ASMS: Non-Targeted Analysis of Per- and Polyfluoroalkyl Substances in Environmental Extracts by Microflow LC-QToF Coupled with Multi-spray ESI</strong></h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/TP_562_Non_Targeted_Analysis_of_Per_and_Polyfluoroalkyl_Substances_in_Environmental_Extracts_by_Microflow_LC_Q_To_F_Coupled_with_Multi_spray_ESI_c2a7e1d5bf.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Targeted screening methods are well established for monitoring Perand polyfluoroalkyl substances (PFAS) in environmental samples. However, PFAS comprise a large and evolving class of compounds, creating a need to screen existing, emerging, and transformation products across diverse matrices. Non-targeted Analysis (NTA) allows for the confirmation of suspected PFAS in the environment, but the sample characterization is often limited by analytical sensitivity. Microflow (0.5 – 40 µL/min) coupled with a multi-nozzle emitter enhances sensitivity by improving desolvation. When this is coupled to a high mass accuracy and resolution Quadrupole Time-ofFlight Mass Spectrometer (QToF), capable of data-dependent and independent MS/MS, PFAS characterization of unknown analytes is possible. In this study, various environmental extracts were processed and screened using NTA for PFAS compounds.</p><h4><strong>Methods</strong></h4><p>A <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=1&amp;search=Nexera+Mikros"><strong>Shimadzu Nexera Mikros LC</strong> </a>was used to introduce the sample to a Newomics DuoESI source with an M3 emitter on a <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=1&amp;search=9050"><strong>LCMS-9050 QToF MS</strong></a> (Fig. 1). A direct injection on an octadecyl column without delay column was performed. Direct injection was chosen over trapand-elute configuration to minimize selectivity bias caused by the trap column.&nbsp;</p><h4><strong>Conclusion</strong></h4><p>With the increased sensitivity of microflow LC-QToF coupled with multi-spray ESI with DIA acquisition, Insight Explore aided in NTA PFAS analysis. When paired with Insight Discovery and Profiler, a streamlined batch data processing workflow with statistical analysis was shown to effectively handle complex environmental matrices and their analyses.</p><h3><strong>3. Thermo Fisher Scientific / ASMS: Robust and sensitive quantitation of 18 steroids in human serum using Thermo Scientific TSQ Certis Triple Quadrupole mass spectrometer</strong></h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/po_004707_lsms_18_steroids_tsq_certis_clinical_po004707_asms2026_na_en_244c52437b.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Accurate quantification of endogenous steroids in human serum is essential for biomonitoring physiological functions such as hormone regulation, reproduction, and immune response in clinical research laboratories. Liquid chromatography–tandem mass spectrometry (LC–MS/MS) is the gold standard for steroid analysis due to its superior sensitivity, selectivity, and multiplexing capability compared to immunoassays. However, steroid measurements remain challenging because of low endogenous concentrations and complex serum matrices. Here, we describe a robust and sensitive LC–MS/MS method for the simultaneous quantification of 18 steroids in human serum using the Thermo Scientific TSQ Certis triple quadrupole mass spectrometer (Figure 1). The method leverages advanced ion source design and fast acquisition to deliver enhanced sensitivity, stability and throughput suitable for high-volume laboratory workflows.</p><h4><strong>Materials and methods</strong></h4><h5><strong>Liquid chromatograph – mass spectrometry&nbsp;</strong></h5><p>Samples were analyzed on a <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/744"><strong>Thermo Scientific Vanquish Horizon UHPLC system</strong></a> coupled to the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/2207"><strong>TSQ Certis MS</strong></a><strong> </strong>operated in selected reaction monitoring (SRM) mode. The mobile phase composition, analytical column details, LC gradient, and overlaid extracted ion chromatograms (EICs) are shown in Figure 3.&nbsp;</p><h5><strong>Data analysis&nbsp;</strong></h5><p>Data were acquired and processed using <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/77"><strong>Thermo Scientific TraceFinder software</strong></a> (v 5.2).</p><h4><strong>Conclusions&nbsp;</strong></h4><p>A sensitive and robust LC–MS/MS method was developed for simultaneous quantification of 18 steroids in human serum using the Vanquish Horizon UHPLC and TSQ Certis MS with OptaMax Plus ion source. The method demonstrated excellent linearity, accuracy, and reproducibility across a wide dynamic range. Optimization of MS conditions, particularly vaporizer temperature, significantly improved sensitivity. Overall, the workflow delivers high sensitivity, selectivity, and long-term stability, providing a reliable solution for high-throughput steroid analysis in clinical and research settings.</p><h3><strong>4. Waters Corporation: Alkaline-hydrolysis Method for PFAS in Textiles and Textiles Products by Xevo™ TQ-S micro with ACQUITY™ UPLC™ H-Class Plus System</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/720009443_en_0ab4914d72.pdf"><strong>Full PDF for download</strong></a></li></ul><div><div><section><div><div><div><div><div><div><h5><strong>Benefits&nbsp;</strong></h5><ul><li>Alkaline hydrolysis method (EN 17681-1:2025) used for preparing textiles, coated textiles and textile products for PFAS analysis allowed the inclusion of side-chain fluorinated polymers&nbsp;</li><li>Extraction method provided significant advantages in handling complex textile matrices by creating clear extracts free from dispersions, settleable solids and particulates&nbsp;</li><li>Protected the high-value LC-MS/MS components from potential damage&nbsp;</li><li>The method improved analytical sensitivity, reproducibility and accuracy, enabled cost-effective and timeefficient PFAS analysis maintained high analytical quality even for challenging high-matrix samples</li></ul><p>Many PFAS are linked to health concerns because of their ability to interfere with the body’s hormone systems, acting as endocrine disruptors also, linked to other toxic effects. Since textiles come into direct and prolonged contact with the skin, there is an increased risk of human exposure—especially for babies and children.4 In addition, PFAS pose significant environmental concerns. These “forever chemicals” do not readily break down and can be released during manufacturing, washing and disposal, allowing them to enter water pathways and persist in the environment. As a result, testing for PFAS has become increasingly important in the textile industry to demonstrate supply chain transparency, build consumer trust and protect brand reputation.</p><p>Synthetic fluorinated chemicals are categorized into two main groups - non-polymeric PFAS and polymeric PFAS, known for their use as water and grease repellent, heat resistant finishes in textiles, upholstery, leather, apparel, carpet and other industrial applications such as packaging, firefighting foams, non-stick cookware, etc. (Figure 1). PFAS are fluorinated substances contain at least one fully fluorinated methyl or methylene carbon atom (without any H/Cl/Br/I atom attached to it), i.e. with a few noted exceptions, any chemical with at least a perfluorinated methyl group or a perfluorinated methylene group.2 PFAS are classified as long chain and short chain based on their perfluorinated carbon chain length. Short chain fluorinated polymers encompasses a diverse range of chemistries, categorized according to their generic chemical and repeating units structures. Few examples are: derivatives of fluorotelomers, perfluoropolyethers with varying carbon chain lengths and acrylates, epoxylates, urethane, silicones of repeated units based structures.3 Polyfluoroalkyl substances such as fluorotelomer alcohols (FTOHs) contain C–H bonds, rendering them more susceptible to degradation. The ethoxylates in fluorotelomers-methacrylate break down to FTOH whereas polymeric fluorinated urethanes, acrylates break down to PFCAs (non-polymeric and polymeric side chain fluorinated polymers). In contrast, perfluoroalkyl substances such as PFOS and PFOA are extremely persistent due to their fully fluorinated carbon chains.&nbsp;</p><p>In alkaline hydrolysis methods, methanolic aqueous sodium hydroxide is used to break down precursor PFAS such as FTOHs, branched side chain PFAS. This process releases terminal perfluorinated carboxylic acids (PFCAs), which can then be measured. However, the efficiency of hydrolysis varies among different PFAS compounds and the presence of interfering substances such as organic matter or other chemicals in the sample matrix can inhibit the cleavage and detection of these analytes.</p><h4><strong>Experimental</strong></h4><ul><li><strong>LC system:</strong> <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/198"><strong>ACQUITY UPLC H-Class Plus System</strong></a> and SMFTN fitted with PFAS kit</li><li><strong>Column(s):</strong> <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1823"><strong>XBridge™ BEH™ C18 5 µm Column</strong></a>, 4.6 x 100 mm&nbsp;</li><li><strong>MS system: </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/209"><strong>Xevo TQ-S micro Mass Spectrometer</strong></a></li></ul><h4><strong>Conclusion&nbsp;</strong></h4><p>By strictly following the critical steps of the alkaline hydrolysis method using methanolic aqueous sodium hydroxide (NaOH) both freely extractable PFAS and those previously bound within side-chain fluorinated polymers such as esters linked to fluorotelomer alcohols (n:2 FTOHs, where n = 4, 6, 8, 10, 12), can be effectively extracted. This approach also safeguards the LC-MS/MS instrumentation from blockages, damage, or contamination by preventing polymer accumulation and matrix interferences.&nbsp;</p><p>The analytical method using the ACQUITY UPLC H-Class Plus System and Xevo TQ-S micro LC-MS/MS System was found to be sensitive, reproducible and accurate, enabling cost-effective and time-efficient PFAS analysis in chemically processed textiles, coated textiles and textile products whilst maintaining high analytical quality even for challenging high-matrix samples.</p></div></div></div></div></div></div></section></div></div>

News from LabRulezLCMS Library - Week 34, 2026

Article

Product

Application

Academy

Video

Poster

A unique company dedicated to serving science helping our customers drive productivity and accelerate results. Through our premier brands – Thermo Scientific, Applied Biosystems, Invitrogen, Fisher Scientific and Unity Lab Services.

Thermo Fisher Scientific

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Based in Berlin, KNAUER is a medium-sized, owner-managed company that has been serving the sciences since 1962. We develop and manufacture scientific instruments of superior quality for liquid chromatography, including: Analytical HPLC/UHPLC, Preparative HPLC, Fast protein liquid chromatography (FPLC), Multi-column chromatography/Simulated moving bed (SMB) chromatography. High pressure dosing, in-line detection systems, and osmometry are additional business areas.

KNAUER

Thermo Scientific Dionex IonPac CS19 IC Columns

Separate common inorganic cations, small polar amines and polyvalent amines using Thermo Scientific Dionex IonPac CS19 IC Columns

<p><strong>Separate polar amines with the Thermo Scientific™ Dionex™ IonPac™ CS19 Cation-Exchange Column. This high-capacity, carboxylate-functionalized column is specifically optimized for the separation of common cations, small polar amines, and moderately hydrophobic and polyvalent cations using simple aqueous eluents and elevated temperatures. The column is ideal for analysis of power plant waters treated with ammonium, morpholine, or ethanolamine and can also be used to analyze chemical additives, chemical process solutions, scrubber solutions, personal care products, and food samples.</strong></p><h5><strong>Analyze Common Cations and Small Polar Amines in Diverse Matrices</strong></h5><ul><li>Simple gradient separation of small polar amines (including alkanolamines and methylamines), and moderately hydrophobic and polyvalent amines (including biogenic amines and alkyl diamines)</li><li>Optimized for simple acidic gradient separations with minimal baseline shift</li><li>High capacity facilitates the analysis of widely disparate peak pairs and high ionic strength matrices with less overloading of the column</li><li>Compatible with moderate amounts of organic solvents, excluding alcohols, to enhance analyte solubility, modify column selectivity, and facilitate effective column clean-up</li></ul><h5><strong>Multiple Formats Available for Application Flexibility</strong></h5><ul><li>4x250mm, 2x250mm analytical columns</li><li>4x50mm, 2x50mm guard columns</li><li>Longer 250mm columns facilitate higher resolution separations of more complex sample matrices</li><li>Smaller i.d. columns provide higher mass sensitivity, eluent and reagent conservation and lower operating costs</li></ul><h4><strong>Specifications</strong></h4><ul><li><strong>Crosslinking: </strong>55% DVB</li><li><strong>Column Capacity:</strong> 2410 μeq</li><li><strong>For Use With (Application):</strong> Cation Exchange</li><li><strong>Max. Pressure:</strong> 3000 psi (207 bar)</li><li><strong>Solvent Compatibility:</strong> Acidic Eluents (pH 0 to 7), 0 to 10% HPLC Solvents, Alcohols Should be Avoided</li><li><strong>Stationary phase:</strong> Super Macroporous Resin</li><li><strong>Format:</strong> Standard Bore</li><li><strong>Packing Material: </strong>Ethylvinylbenzene/Divinylbenzene</li></ul>

Thermo Scientific Dionex IonPac CS19-4μm IC Columns

High-capacity ion-exchange column with 4 μm resin for highest resolution of cations and polar amines in complex samples. Enables fast, reliable separations and cost-effective operation with HPIC systems.

<p><strong>Attain the optimal combination of chromatographic speed and high resolution using the new Thermo Scientific™ Dionex™ IonPac™ CS19-4μm Capillary, Analytical, &amp; Guard Column. This high-capacity, high-resolution carboxylate-functionalized column provides excellent resolution of common cations, small polar amines, and polyvalent amines in complex sample matrices such as power plant waters treated with ammonium, morpholine, or ethanolamine, chemical additives, chemical process solutions, scrubber solutions, personal care products, and food samples.</strong><br><strong>Compared to the Thermo Scientific™ Dionex™ IonPac™ CS19 column, this column uses smaller resin particles for more efficient separations resulting in more accurate peak integration and more reliable results.</strong></p><h5><strong>Highest Resolution Separation of Common Cations and Small Polar Amines in Diverse Matrices</strong></h5><ul><li>Highest resolution, through the use of smaller resin particles, of common cations and small polar amines in complex sample matrices</li><li>Higher peak efficiency and increased peak resolution for more consistent integration and more reliable results</li><li>Easily transfer applications from the Dionex IonPac CS19 column to the 4 μm column due to the similar selectivity</li><li>Simple gradient separation of small polar amines (including alkanolamines and methylamines), and moderately hydrophobic and polyvalent amines (including biogenic amines and alkyl diamines)</li><li>High capacity facilitates injection of more concentrated samples without column overloading or peak broadening</li><li>Compatible with moderate amounts of organic solvents, excluding alcohols, to enhance analyte solubility, modify column selectivity, and facilitate effective column clean-up</li></ul><h5><strong>Use With a High-Pressure IC System</strong></h5><p>Higher resolution is achieved through the use of smaller resin particles, which produce a column backpressure over 3000 psi at the standard flow rates. A high-pressure IC system, such as the Thermo Scientific™ Dionex™ ICS-5000+ HPIC™ or the Dionex ICS-4000 Capillary HPIC system is required to operate this column under standard conditions and take advantage of elevated flow rates and faster run times.</p><h5><strong>Reduce Operating Costs With Lower Eluent Requirements</strong></h5><p>The Dionex IonPac CS19-4μm capillary column provides the same performance as the standard bore and microbore Dionex IonPac CS19-4μm columns because it is packed with the same material. Operating costs are reduced because the capillary system operates at only 1% of the eluent flow rate of the standard bore system, requiring less eluent and producing less waste.</p><h5><strong>Multiple Formats Available for Application Flexibility</strong></h5><ul><li>4x250mm, 2x250mm analytical columns</li><li>4x50mm, 2x50mm guard columns</li><li>0.4x250mm capillary column, 0.4x50mm capillary guard column</li><li>Longer 250mm columns facilitate higher resolution separations of more complex sample matrices</li><li>Smaller i.d. columns provide higher mass sensitivity, eluent and reagent conservation and lower operating costs</li></ul><h4><strong>Specifications</strong></h4><ul><li><strong>Crosslinking: </strong>55% DVB</li><li><strong>Column Capacity:</strong> 2410 μeq</li><li><strong>For Use With (Application):</strong> Cation Exchange</li><li><strong>Max. Pressure:</strong> 5000 psi (345 bar)</li><li><strong>Solvent Compatibility:</strong> Acidic Eluents (pH 0 to 7), 10% HPLC Solvents, Alcohols Should be Avoided</li><li><strong>Stationary phase:</strong> IonPac CS19-4μm</li><li><strong>Format:</strong> Standard Bore</li></ul>

Thermo Scientific Dionex IonPac CS20 IC Columns

Analyze inorganic cations and amines using the Thermo Scientific™ Dionex™ IonPac™ CS20 ion chromatography (IC) columns.

<p><strong>Analyze inorganic cations and amines using the Thermo Scientific™ Dionex™ IonPac™ CS20 ion chromatography (IC) columns. Designed to complement Dionex IonPac CS18 and Dionex IonPac CS19 columns, the Dionex IonPac CS20 columns provide a large separation window between monovalent and divalent cations. This allows most amines to elute after the alkali metals but before the alkaline earth metals, moving the amines away from matrix ions that would normally make quantitation difficult. Its selectivity makes the Dionex IonPac CS20 particularly useful for determining a variety of alkyl and alkanol amines.</strong></p><h5><strong>Superior performance in the separation of common inorganic cations and amines</strong></h5><ul><li>Use the high capacity Dionex IonPac CS20 to determine inorganic cations and amines including methylamines, ethylamines, ethanolamines, and alkanolamines in diverse sample matrices</li><li>Unique stationary phase functionalized with a combination of sulfonic, phosphonic, and carboxylic acid groups can tolerate acidic samples containing up to 100mM hydronium ion (pH 1) with minimum loss of performance</li><li>Operable over a wide temperature range (15-70°C) to facilitate method development and improve critical pair separations</li><li>Compatible with 100% organic solvents (acetonitrile and acetone) to enhance analyte solubility, modify column selectivity, and facilitate effective column clean-up</li></ul><h5><strong>Use with a high-pressure IC system</strong></h5><p>A high-pressure IC system, such as the Thermo Scientific™ Dionex™ ICS-5000+ HPIC™, Dionex Integrion™ HPIC system, or the Dionex ICS-4000 Capillary HPIC system is required to operate this column under standard conditions.</p><h5><strong>Reduce operating costs with lower eluent requirements</strong></h5><p>The Dionex IonPac CS20 capillary columns provide the same performance as the standard bore and microbore Dionex IonPac CS20 columns because they are packed with the same material. Operating costs are reduced because the capillary system operates at only 1% of the eluent flow rate of the standard bore system, requiring less eluent and producing less waste.</p><h5><strong>Multiple Formats Available</strong></h5><ul><li>4x250mm and 2x250mm analytical columns</li><li>4x50mm and 2x50mm analytical guard columns</li><li>0.4x250mm capillary columns</li><li>0.4x50mm capillary guard columns</li><li>Smaller i.d. columns provide higher mass sensitivity, conserve eluent and reagents, and reduce operating costs</li></ul><h4><strong>Specifications</strong></h4><ul><li><strong>Crosslinking: </strong>55% DVB</li><li><strong>Column Capacity:</strong> 3000 μeq</li><li><strong>For Use With (Application):</strong> Cation Exchange</li><li><strong>Max. Pressure:</strong> 5000 psi (345 bar)</li><li><strong>Solvent Compatibility:</strong> pH 0 to 7, 0 to 100% Organic HPLC Solvents, Alcohols Should be Avoided</li><li><strong>Stationary phase:</strong> Macroporous Resin</li><li><strong>Format:</strong> Standard Bore</li><li><strong>Packing Material: </strong>Ethylvinylbenzene/Divinylbenzene</li></ul>

Thermo Scientific Dionex IonPac CS21-Fast-4μm IC Columns

Resolve quaternary amine cationic polar pesticides including chlormequat, mepiquat, paraquat, and diquat with the Thermo Scientific™ Dionex™ IonPac™ CS21-Fast-4μm column. 

<p><strong>Resolve quaternary amine cationic polar pesticides including chlormequat, mepiquat, paraquat, and diquat with the Thermo Scientific™ Dionex™ IonPac™ CS21-Fast-4μm column. The unique selectivity of the Dionex IonPac CS21-Fast-4μm column allows it to resolve trace amounts of cationic polar pesticides in high ionic strength matrices within approximately fifteen minutes using an electrolytically generated MSA gradient. Quaternary amines are eluted away from matrix cations, making the Dionex IonPac CS21-Fast-4μm column ideal for IC-MS/MS applications where matrix ions are diverted to waste.</strong></p><h5><strong>Superior Chromatographic Performance</strong></h5><ul><li>High capacity allows injection of complex matrices without overloading the column while maintaining excellent peak shapes for lower concentration analytes.</li><li>Quickly separate trace levels of the four major quaternary amine cationic polar pesticides chlormequat, mepiquat, paraquat, and diquat in high ionic strength matrices using an MSA gradient.</li><li>Separate other cationic pesticides of interest including diethanolamine, triethanolamine, N-N-dimethylhydrazine, trimethylsulfonium, morpholine, melamine, streptomycin, and nereistoxin.</li></ul><h5><strong>Specifically designed for IC-MS/MS applications</strong></h5><ul><li>Completely resolves paraquat and diquat, species with similar masses.</li><li>Available in microbore format that is compatible with MS flow rates.</li><li>Selectivity allows matrix ions to be diverted to waste which keeps the MS source cleaner.</li><li>Solvent compatible (up to 100% acetonitrile and 20% isopropyl alcohol).</li><li>Fast analysis of cationic polar pesticides in food, beverages, and environmental waters.</li></ul><h5><strong>Use with a High-Pressure IC system</strong></h5><p>A high-pressure IC system, such as the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/410"><strong>Thermo Scientific™ Dionex™ ICS-6000 HPIC system</strong></a> or <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/408"><strong>Thermo Scientific™ Dionex™ Integrion™ HPIC system</strong></a> is required to operate this column under standard conditions.</p><h4><strong>Specifications</strong></h4><ul><li><strong>Crosslinking: </strong>80% DVB</li><li><strong>Column Capacity:</strong> 110 μeq</li><li><strong>For Use With (Application):</strong> Cation Exchange</li><li><strong>Max. Pressure:</strong> 5000 psi (345 bar)</li><li><strong>Solvent Compatibility:</strong> pH 0-7, HPLC solvents (100% acetonitrile and up to 20% isopropyl alcohol), primary and secondary alcohols should be avoided)</li><li><strong>Format:</strong> Microbore</li><li><strong>Packing Material:</strong> Ethylvinylbenzene/Divinylbenzene</li></ul>

Thermo Scientific SurePac Bio 550 SEC MDi HPLC Columns

SurePac™ Bio 550 SEC MDi™ column delivers high-resolution, reproducible AAV size-based separations with 3 μm silica, 550 Å pores, and bioinert hardware for optimal recovery and QC reliability.

<p><strong>Experience the future of Size-Exclusion Chromatography (SEC) with SurePac™ Bio 550 SEC MDi™ analytical columns and guards exclusively designed to deliver robust and reproducible performance at high resolution and throughput to accelerate your therapeutics analysis process. The column's groundbreaking MDi™ technology integrates our advanced 3 μm monodisperse silica particle platform with bioinert hardware to ensure superior reliability for best sample recovery. SurePac™ Bio 550 SEC MDi™ column is ideal for AAV gene therapeutics analysis and offers excellent selectivity due to the dedicated smaller particle (3 μm) size combined with wide-pore (550Å) for separating monomeric AAVs from aggregates based on their size differences.</strong></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Sure_Pac_Bio_550_SEC_M_Di_HPLC_Columns_3_8391a584e0.jpg" alt="Thermo Scientific: SEM image of 3μm monodisperse silica particles (left) vs. 3 μm polydisperse particles (right)" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Sure_Pac_Bio_550_SEC_M_Di_HPLC_Columns_3_8391a584e0.jpg 245w," sizes="100vw" width="1023" height="508"></p><p>SurePac Bio 550 SEC MDi columns and guards are based on high-purity, spherical, porous (550 Å), 3 μm monodispersed silica particles that are covalently modified with a proprietary diol hydrophilic layer. This unique design yields shorter diffusion distances and enhanced reproducible mass transfer and narrower peaks. The consistent size of these particles facilitates precise control over media synthesis and column packing, significantly improving column-to-column and lot-to-lot reproducibility. The columns are housed in a hydrophilic bioinert-coated stainless-steel hardware to eliminate secondary interactions, ensuring optimal performance during the initial injection process.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Sure_Pac_Bio_550_SEC_M_Di_HPLC_Columns_043f131056.jpg" alt="Thermo Scientific: SurePac Bio 550 SEC MDi HPLC Columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Sure_Pac_Bio_550_SEC_M_Di_HPLC_Columns_043f131056.jpg 156w," sizes="100vw" width="650" height="650"></p><ul><li>Ideal for AAV gene therapy characterization and quality control assessment due to selectivity of the dedicated smaller particle (3 μm) combined with wide-pore (550Å) size</li><li>Superior column-to-column and lot-to-lot reproducibility eliminates column variability as a concern in stability and QA/QC testing</li><li>High-efficiency peaks with excellent recovery</li><li>Higher resolution and throughput for fast turnaround time without sacrificing performance</li><li>Bioinert hardware to eliminate analyte adsorption</li></ul><h4><strong>Specifications</strong></h4><ul><li><strong>Max. Pressure: </strong>3500 psi (241 bar)</li><li><strong>Packing Material:</strong> Monodisperse Silica Resin</li><li><strong>Flow Rate: </strong>0.6 mL/min</li><li><strong>Temperature:</strong> 20°C to 60°C</li><li><strong>Phase:</strong> Size Exclusion</li><li><strong>Particle Size: </strong>3 μm</li><li><strong>pH: </strong>2 to 8</li></ul>

Thermo Scientific SureSTART Vials and Well Plates Collection

Start your analysis with confidence using SureSTART vials, caps, well plates, and kits—offering full compatibility, quality materials, and performance across three levels.

<h4><strong>Streamlined choice. Trusted quality.</strong></h4><p><strong>Start your analysis with confidence using Thermo Scientific™ SureSTART™ vials, caps, inserts, well plates, mats, and certified kits designed to meet your analytical, regulatory, and performance requirements. With full instrument compatibility, high material quality, and consistent performance across three defined levels, the SureSTART collection offers a smarter way to choose the right sample containment solution for your workflow.</strong></p><h3><strong>Why choose SureSTART?</strong></h3><ul><li><strong>Proven reliability</strong>: Every product is manufactured and certified to meet physical specifications—no weak links in your workflow.</li><li><strong>Clear selection</strong>: Three performance levels help you balance sensitivity, robustness, and cost, now visually marked with one, two, or three waves on the vial.</li><li><strong>Universal compatibility</strong>: Designed for seamless integration with all major GC, HPLC/UHPLC, and MS autosamplers across all vendors.</li><li><strong>Certified cleanliness</strong>: Products are manufactured using the purest glass and plastics with low extractables and leachables, including GOLD-grade and silanized glass.</li><li><strong>Maximum sample integrity</strong>: Minimize analyte loss and background peaks with precision-engineered sealing, surface chemistry, and material composition.</li><li><strong>Bulk savings &amp; simplified inventory</strong>: Available in multiple pack sizes, performance levels, and formats to support your lab’s needs and budget.</li></ul><h3><strong>The Three Performance Levels</strong></h3><ul><li><strong>Level 1 – Everyday analysis</strong>: For general-purpose GC/HPLC detection (e.g. UV/Vis, FID, RI). These chromatography-approved products are ideal for routine analyses with cost-efficiency in mind.</li><li><strong>Level 2 – High-throughput analysis</strong>: Designed for regulated labs requiring robust and reproducible data, especially when using MS detectors for routine quantification.</li><li><strong>Level 3 – High performance</strong>: For the most sensitive and selective analyses near the method detection limit. Packed in cleanroom environments and made with ultra-pure materials for maximum sample security and MS compatibility.</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Sure_START_Vials_and_Well_Plates_Collection_5a8b0da936.jpg" alt="Thermo Scientific SureSTART Vials and Well Plates Collection: Three performance levels help you balance sensitivity, robustness, and cost, now visually marked with one, two, or three waves on the vial." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Sure_START_Vials_and_Well_Plates_Collection_5a8b0da936.jpg 245w," sizes="100vw" width="1182" height="270"></p><h3><strong>SureSTART Certified Vial and Cap Kits</strong></h3><ul><li><strong>Specification Certified</strong>: Routine analyses – Certified for physical specifications; no individual certificate.</li><li><strong>LC/GC Certified</strong>: Chromatography-grade – Tested for 15 physical parameters with LC-UV &amp; GC-FID; certificate included.</li><li><strong>MSCERT</strong>: For LC-MS/GC-MS – Certified low-adsorption kits tested with MS; includes SureStop™ vials with AVCS™ caps.</li><li><strong>MSCERT+</strong>: For trace-level MS or DIA – Pre-cleaned, tested with LC-MS/GC-MS, and sold only as kits to ensure purity.</li><li><strong>Application Certified</strong>: Pre-matched kits for specific instruments or validated applications.</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Sure_START_Vials_and_Well_Plates_Collection_2_fef6049d71.jpg" alt="Thermo Scientific SureSTART Vials and Well Plates Collection: There are several factors to consider when choosing a vial or well plate for your application. The table below will help guide you through this process to determine what type of product/performance level is most suitable for your application requirements." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Sure_START_Vials_and_Well_Plates_Collection_2_fef6049d71.jpg 204w," sizes="100vw" width="1515" height="1159"></p><h3><strong>SureSTART Well Plates and Mats</strong></h3><p>Thermo Scientific™ WebSeal™ well plates are ideal for laboratories seeking to increase autosampler capacity, reduce solvent usage, and streamline high-throughput workflows. Available in <strong>96- and 384-well formats</strong>, they offer a certified alternative to traditional vials and are fully compatible with automated SPE/SLE platforms.</p><ul><li><strong>Space-saving efficiency</strong>: Replace vials with well plates to increase sample capacity up to 8× and reduce storage footprint.</li><li><strong>Flexible performance levels</strong>:<ul><li><strong>Level 1: Standard plates for routine</strong>, non-regulated use (GC-tested).</li><li><strong>Level 2: Low-bleed plates and high-performance mats</strong>, validated for LC-MS/GC-MS.</li><li><strong>Level 3: Premium WebSeal Plate+</strong> with glass-coated plastic wells—ideal for trace analytes and protein adsorption control.</li></ul></li><li><strong>Solvent stability and clean sample contact</strong>: WebSeal Plate+ uses nanolayered silicon dioxide for minimal extractables and ultra-low adsorption.</li><li><strong>Compatible sealing options</strong>:<ul><li><strong>Silicone mats: </strong>For long-term storage and consistent results.</li><li><strong>Pre-slit mats: </strong>For autosampler injection without evaporation or contamination.</li><li><strong>Adhesive seals: </strong>For single-use workflows and re-sealing options with cavity protection.</li></ul></li></ul><p>Whether you work with polar solvents, proteins, or trace-level analyses, SureSTART well plates and sealing accessories help you optimize throughput, precision, and data confidence across all chromatography workflows.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Sure_START_Vials_and_Well_Plates_Collection_3_abce3dd960.jpg" alt="Thermo Scientific SureSTART Vials and Well Plates Collection: Selecting the perfect Thermo Scientific WebSeal well plates and mats for your chromatography requirements is easy using our selector tools and resources." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Sure_START_Vials_and_Well_Plates_Collection_3_abce3dd960.jpg 245w," sizes="100vw" width="1516" height="902"></p>

Thermo Scientific LCQUAN Quantitative Software

LCQUAN is a robust, 21 CFR Part 11-compliant software for LC-MS/MS bioanalysis, providing complete tools for data acquisition, review, and secure management in drug development workflows.

<h4><strong>21 CFR Part 11-compliant software for quantitative LC-MS/MS data acquisition and management</strong></h4><p><strong>Thermo Scientific™ LCQUAN™ quantitative software is a robust, regulatory-compliant data system tailored for bioanalytical laboratories conducting LC-MS/MS assays. Developed in close collaboration with pharmaceutical industry experts, LCQUAN provides all the tools needed to acquire, process, review, and securely manage quantitative data across global drug development workflows.</strong></p><h3><strong>Key Features</strong></h3><h4><strong>Regulatory Compliance</strong></h4><ul><li>Fully compliant with FDA 21 CFR Part 11 requirements for electronic records and signatures</li><li>Enables secure submission of electronic documents to regulatory agencies, including the FDA</li></ul><h4><strong>Comprehensive Workflow</strong></h4><ul><li>Guides users step-by-step through acquisition, method development, data review, processing, reporting, and export</li><li>Supports import of sequence information from external systems</li><li>Streamlines interaction with Thermo Scientific™ Watson LIMS™ for GLP-compliant bioanalytical studies</li></ul><h4><strong>Secure Data Management</strong></h4><ul><li>Enables data processing on networked systems, including secure remote disks</li><li>Centralized, workbook-style data storage for easy archiving and retrieval</li><li>Multi-level user privileges—from full system access to read-only modes</li></ul><h4><strong>Seamless LIMS Integration</strong></h4><ul><li>Bi-directional communication with Watson LIMS facilitates study tracking, chromatogram review, auditing, and compliance</li><li>Optimized for regulated pharmaceutical workflows from discovery through clinical trials</li></ul><h4><strong>Proven Platform</strong></h4><ul><li>Part of an integrated Thermo Scientific LC-MS/MS solution suite, including TSQ Series mass spectrometers and FAIMS interface technology</li><li>Ensures high sensitivity, robustness, and reproducibility for regulated bioanalytical assays</li></ul>

Thermo Scientific Cindion Combustion Ion Chromatography System

Fully integrated C-IC system for automated screening of halogens, sulfur compounds, and PFAS in solid, liquid, and gas samples.

<h4><strong>Automated halogen, sulfur, and PFAS screening in solid, liquid, and gas samples.</strong></h4><p>The <strong>Thermo Scientific™ Cindion™ Combustion Ion Chromatography (C-IC) System</strong> is a fully integrated platform designed for screening corrosive and toxic halogens, sulfur compounds, and PFAS in a wide range of sample matrices. Whether analyzing solids, liquids, or gases, the system delivers low background levels, high sensitivity, and robust automated workflows—all in a compact footprint.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Cindion_Combustion_Ion_Chromatography_System_6_e1eda9de2f.jpg" alt="Thermo Scientific™ Cindion™ Combustion Ion Chromatography System" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Cindion_Combustion_Ion_Chromatography_System_6_e1eda9de2f.jpg 207w," sizes="100vw" width="650" height="490"></p><h3><strong>Key Features</strong></h3><ul><li><strong>Compact system footprint:</strong> A novel combustion tube design ensures complete combustion over a shorter path, saving bench space and enhancing efficiency.</li><li><strong>Fully automated workflow:</strong> From sample introduction to combustion, absorption, ion chromatographic separation, and data reporting—automation minimizes user intervention.</li><li><strong>PFAS-free sample path:</strong> Components in the sample flow path are PFAS-free to eliminate contamination and enable ultra-sensitive PFAS detection (EPA Method 1621).</li><li><strong>Reagent-Free Ion Chromatography (RFIC™):</strong> Automated eluent generation—just add water. Electrolytic suppression ensures consistent results with no external pump.</li><li><strong>Versatile sample compatibility:</strong> Supports AOX and AOF determinations, as well as total and inorganic fluorine (TF/TIF) analysis in environmental, food, industrial, and petrochemical applications.</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/76"><strong>Chromeleon CDS integration</strong></a><strong>:</strong> A single software platform for full control of C-IC operations including sequence setup, system control, and reporting.</li><li><strong>High throughput:</strong> Accommodates up to 45 solid or 120 liquid samples; includes smart hydration and reduced carryover for faster cycle times.</li><li><strong>Application-ready:</strong> Backed by extensive application notes and 50+ years of Thermo Scientific expertise in ion chromatography.</li></ul><h3><strong>Typical Applications</strong></h3><ul><li><strong>Environmental testing:</strong> AOX/AOF screening in water and wastewater; PFAS monitoring.</li><li><strong>Food and packaging:</strong> Determination of organic fluorine content in food contact materials.</li><li><strong>Petrochemicals:</strong> Halogen and sulfur analysis in fuels and oils to prevent equipment corrosion and meet emission standards.</li><li><strong>Electronics and polymers:</strong> Detection of restricted brominated and fluorinated substances in plastics and E&amp;E components.</li><li><strong>Mining and metallurgy:</strong> Screening for corrosive species in ores and geological samples.</li></ul><h3><strong>System Components</strong></h3><ul><li><strong>Sample delivery module:</strong> Liquid/solid autosampler or gas injector.</li><li><strong>Combustion/absorption unit:</strong> Integrated with autosampler and absorption tube.</li><li><strong>Ion chromatography system:</strong> <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1078"><strong>Thermo Scientific™ Dionex™ IC with RFIC™</strong></a> technology.</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Cindion_Combustion_Ion_Chromatography_System_3_79a361351d.jpg" alt="Thermo Scientific™ Cindion™ Combustion Ion Chromatography System" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Cindion_Combustion_Ion_Chromatography_System_3_79a361351d.jpg 243w," sizes="100vw" width="1509" height="971"></p><ol><li><strong>Versatile autosampler.</strong> Load up to 45 (solid) or 120 (liquid) samples and easily switch between sample types without the need for tools.</li><li><strong>Peltier cooled sample introduction.</strong> Reduce cycle time by accelerating the cooling of the boat between samples.</li><li><strong>Compact combustion tube.</strong> Enhanced oxygen flow reduces time needed for complete combustion by increasing efficiency.</li><li><strong>Smart hydration.</strong> Peristaltic pump delivers water only during sample combustion to minimize usage and preserve tube integrity.</li><li><strong>Variable absorption volume.</strong> Optimize the absorption volume based on analytical need.</li><li><strong>Reduced sample pathway.</strong> Lower baseline contamination and low sample carryover to decrease wash time between samples.</li><li><strong>Advanced high-performance pump technology and electronics.</strong> Take advantage of a wider range of columns and chemistries improving speed and quality of results.</li><li><strong>Function driven design.</strong> Quickly and safely access everything on the instrument.</li><li><strong>Fast, flexible, convenient electrolytic suppression.</strong> Just connect the suppressor; no external pump or offline conditioning needed for regeneration.</li><li><strong>Thermo Scientific™ Dionex™ Reagent-Free™ Ion Chromatography (RFIC™).</strong> Makes eluent preparation as simple as “just add water,” while ensuring more consistent results and enabling optimized gradient separations.</li></ol><h3><strong>Results you can count on</strong></h3><p>Getting analytes into solution is only part of the process. Being able to resolve them so that each peak can be accurately quantified is equally integral to reliable, accurate results.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Cindion_Combustion_Ion_Chromatography_System_4_96814c59fb.jpg" alt="Thermo Scientific™ Cindion™ Combustion Ion Chromatography System: Figure 1. PFAS as adsorbable organic fluorine (AOF) in municipal wastewater. C-IC can be used as a screening tool for presence of PFAS compounds by adsorption onto granular activated carbon, subsequent combustion and IC analysis." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Cindion_Combustion_Ion_Chromatography_System_4_96814c59fb.jpg 245w," sizes="100vw" width="1032" height="541"></p><p>Our IC systems are paired with an unmatched portfolio of columns that are optimized to deliver the capacity, selectivity and resolution you need to get the answers you seek.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Cindion_Combustion_Ion_Chromatography_System_5_b47f92752f.jpg" alt="Thermo Scientific™ Cindion™ Combustion Ion Chromatography System: Figure 2. PFAS in food contact material. PFAS, as organic fluorine, can be determined by subtracting values for total inorganic fluorine (TIF) from total fluorine (TF) by IC and C-IC, respectively." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Cindion_Combustion_Ion_Chromatography_System_5_b47f92752f.jpg 245w," sizes="100vw" width="1184" height="588"></p>

Thermo Scientific Vanquish Charged Aerosol Detectors

Thermo Scientific Vanquish CAD detectors deliver near-universal detection with high sensitivity, wide dynamic range, gradient compatibility, and compliance-ready design.

<p><strong>Expand your detection range and achieve accurate quantitation in High-Performance Liquid Chromatography (HPLC) with the near-universal Charged Aerosol Detector (CAD). Featuring a wide linear and dynamic range along with a uniform response independent of chemical structure, Thermo Scientific™ Vanquish™ CAD systems allow you to measure virtually all non-volatile and many semi-volatile analytes at low-nanogram to sub-nanogram concentrations. Confidently quantify both trace impurities and highly concentrated active compounds in a single analysis.</strong></p><h3><strong>Key Benefits</strong></h3><ul><li><strong>Standard-free quantitation of unknowns</strong> – uniform response enables reliable single-calibrant quantitation</li><li><strong>Superior sensitivity</strong> – 10× lower LODs compared to ELSD, LOQs as low as 1–20 ng on-column</li><li><strong>Wide dynamic range</strong> – linear up to 2 orders of magnitude, dynamic up to 4 orders</li><li><strong>Compatible with gradient elution</strong> – maintain uniform response using inverse gradient, unlike RID</li><li><strong>Integrated diverter valve</strong> – prevents contamination, directs unwanted matrix to waste, and improves quantitation of early-eluting compounds</li><li><strong>Compliance and data integrity</strong> – full qualification of method parameters, audited flow path control, and seamless integration with <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/76"><strong>Thermo Scientific Chromeleon™ CDS</strong></a></li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Vanquish_Charged_Aerosol_Detectors_1_e135b2d6fe.jpg" alt="Thermo Scientific Vanquish Charged Aerosol Detectors" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Vanquish_Charged_Aerosol_Detectors_1_e135b2d6fe.jpg 209w," sizes="100vw" width="650" height="486"></p><h3><strong>Technical Features</strong></h3><ul><li><strong>Detection mode:</strong> Records up to 4 unique power values for optimal linear response</li><li><strong>Gas requirements:</strong> Nitrogen (recommended) or compressed air</li><li><strong>Dynamic range:</strong> Up to 4 orders of magnitude</li><li><strong>Data collection rate:</strong> Up to 200 Hz</li><li><strong>Compatibility:</strong> Designed for <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products?category=37&amp;manufacturerItems=3&amp;search=Vanquish"><strong>Thermo Scientific™ Vanquish™ HPLC and UHPLC systems</strong></a>; integration with other systems possible</li><li><strong>Outputs:</strong> Digital and analog output options available</li><li><strong>Safety features:</strong> Overpressure relief, leak sensing, high-temperature shutoff, flood prevention, and diagnostic monitoring</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Vanquish_Charged_Aerosol_Detectors_3_335506f860.jpg" alt="Thermo Scientific Vanquish Charged Aerosol Detectors" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Vanquish_Charged_Aerosol_Detectors_3_335506f860.jpg 245w," sizes="100vw" width="650" height="378"></p><h3><strong>Product Portfolio</strong></h3><ul><li><strong>Vanquish CAD HP</strong> – broad temperature range (ambient, 10–100 °C), versatile high-performance configuration</li><li><strong>Vanquish CAD FP</strong> – fixed-point operation at defined set temperatures (ambient, 35 °C, 50 °C, 70 °C)</li><li><strong>Vanquish CAD H</strong> – heating-enabled design (ambient +5 to +100 °C)</li><li><strong>Vanquish CAD F</strong> – fixed-temperature options (35 °C, 50 °C, 70 °C)</li><li><strong>Vanquish CAD HP, Analog Output</strong> – full performance with analog signal output</li><li><strong>Vanquish CAD HP, Digital Output</strong> – full performance with digital data output</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Vanquish_Charged_Aerosol_Detectors_2_795050403c.jpg" alt="Thermo Scientific Vanquish Charged Aerosol Detectors" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Vanquish_Charged_Aerosol_Detectors_2_795050403c.jpg 245w," sizes="100vw" width="650" height="397"></p>

Thermo Scientific TSQ Certis Triple Quadrupole Mass Spectrometer

Triple quadrupole Thermo Scientific TSQ Certis built for long-term robustness, up to 900 SRMs/s, and stable performance across tens of thousands of injections using OptaMax Plus ion source and advanced Stellar ion optics.

<p><strong>The Thermo Scientific TSQ Certis is a high-performance triple quadrupole LC-MS/MS system designed for targeted quantitative analysis in demanding routine and regulated environments. Built on the proven </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/404"><strong>TSQ Altis Plus </strong></a><strong>platform, it integrates advanced front-end hardware, innovative ion optics, and compliance-ready software to deliver superior performance and uptime.</strong></p><p>Powered by the <strong>OptaMax Plus ion source</strong> and <strong>Stellar ion vector optics</strong>, TSQ Certis provides exceptional sensitivity, long-term robustness, and reproducible performance even for complex sample matrices. With an acquisition speed of up to <strong>900 SRMs per second</strong>, the system is ideally suited for <strong>pharmaceutical, clinical, forensic toxicology, environmental, and food safety laboratories</strong>.</p><p>Its rugged design supports <strong>tens of thousands of injections between cleanings</strong>, while an integrated <strong>early-warning maintenance system</strong> helps prevent unplanned downtime. Full compatibility with <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/76"><strong>Chromeleon CDS</strong></a><strong>, </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/77"><strong>TraceFinder</strong></a><strong>, </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1758"><strong>Xcalibur</strong></a><strong>, FreeStyle, and </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1764"><strong>mzCloud</strong> </a>ensures seamless integration into both routine and advanced analytical workflows.</p><h4><strong>Key features</strong></h4><ul><li>Triple quadrupole LC-MS/MS for targeted quantitation</li><li>Up to <strong>900 SRMs/s</strong> for high-throughput workflows</li><li>OptaMax Plus ion source with enhanced vaporizer temperatures</li><li>Excellent sensitivity and signal stability</li><li>Fast polarity switching <strong>&lt; 5 ms</strong></li><li>Rugged design with extended maintenance intervals</li><li>Compliance-ready software ecosystem</li><li><strong>3-year standard factory warranty</strong></li></ul><h4><strong>Selected specifications</strong></h4><ul><li><strong>Type:</strong> Triple Quadrupole LC-MS</li><li><strong>Mass range:</strong> 2–2010 m/z</li><li><strong>Resolution:</strong> 0.2 FWHM</li><li><strong>Acquisition speed:</strong> 900 SRMs/s</li><li><strong>Weight:</strong> 112 kg</li><li><strong>Dimensions (W × D × H):</strong> 833 × 660 × 703 mm</li><li><strong>LC compatibility:</strong> <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products?category=37&amp;search=vanquish">Vanquish LC</a>, Transcend LC</li><li><strong>Ion sources:</strong> OptaMax Plus, OptiSpray, EASY-Spray NG, FAIMS Pro Duo, VeriSpray</li></ul><div><div><div><div><div><h3><strong>Clinical research application: long-term instrument stability even with contaminant-heavy matrices</strong></h3></div></div><div><div><p>Analyzing human whole blood by LC-MS presents persistent challenges: matrix contaminants can accumulate within the ion source and API stack, compromising signal integrity and reproducibility. Restoring data quality demands time-consuming maintenance. The TSQ Certis Mass Spectrometer proves its durability by maintaining stable, precise performance through tens of thousands of injections—minimizing downtime and maximizing throughput.</p></div></div></div></div></div><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_TSQ_Certis_Triple_Quadrupole_Mass_Spectrometer_0ec820459f.jpg" alt="Thermo Scientific TSQ Certis Triple Quadrupole Mass Spectrometer: Raw peak area of 15pg Ascomycin on column was determined in whole blood for 10,209 injections. The experiment was run over a 5-week period, and the system delivered an RSD of 13.8% with no cleaning of the ion transfer tube or the sweep cone." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_TSQ_Certis_Triple_Quadrupole_Mass_Spectrometer_0ec820459f.jpg 245w," sizes="100vw" width="2048" height="1152"></p><div><div><div><div><div><h3><strong>Endocrinology application: superior performance for steroid quantitation</strong></h3></div></div><div><div><p>Liquid chromatography coupled with triple quadrupole (LC–QqQ) mass spectrometry has become the industry standard for the quantitative determination of steroids in biological matrices. Compared to immunoassays, LC–QqQ MS offers superior analytical specificity, lower detection limits, and improved reproducibility, making it ideal for regulated pharmacokinetic, endocrinological, and clinical research applications. The TSQ Certis Mass Spectrometer provides the speed, specificity, and ultra-high sensitivity necessary for reliable steroid quantitation.&nbsp;</p></div></div></div></div></div><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_TSQ_Certis_Triple_Quadrupole_Mass_Spectrometer_2_3a48cc4deb.jpg" alt="Thermo Scientific TSQ Certis Triple Quadrupole Mass Spectrometer: LC SRM chromatogram of 18 steroids in BSA run using the Thermo Scientific Vanquish Flex UHPLC System and TSQ Certis Mass Spectrometer. This is an 8-minute chromatography run utilizing the Thermo Scientific Hypersil Gold C18 Column for separation. The samples were protein crashed from 0.05% BSA in PBS, and injecting 5µL." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_TSQ_Certis_Triple_Quadrupole_Mass_Spectrometer_2_3a48cc4deb.jpg 245w," sizes="100vw" width="2048" height="1152"></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_TSQ_Certis_Triple_Quadrupole_Mass_Spectrometer_3_62ede15e59.jpg" alt="Thermo Scientific TSQ Certis Triple Quadrupole Mass Spectrometer: Highly sensitive triple quadrupole instrumentation, often with advanced ion optics, is needed for Dihydrotestosterone (DHT) quantitation. The DHT quantitation peak and calibration curve of DHT run at 0.4pg on column with an RSD of 8.2%." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_TSQ_Certis_Triple_Quadrupole_Mass_Spectrometer_3_62ede15e59.jpg 245w," sizes="100vw" width="2048" height="1152"></p>

Products from Thermo Fisher Scientific distributed by Thermo Fisher Scientific (EMEA) - page 2

Related content

News from LabRulezLCMS Library - Week 34, 2026

Seeing is Believing – Detection Made Easy Part 2: Detector Characteristics

4.5-Minute Oral Fluid LC MS Method to Detect 31 Drugs of Abuse Using Stellar MS