EU Regulation 396/2005: Pesticide Residue Testing and the Critical Role of QuEChERS Evaporation in Food Safety

<div><div><p><strong>Researchers led by </strong><a target="_blank" rel="noopener noreferrer" href="https://kudova.group.uochb.cz/en"><strong>Eva Kudová</strong></a><strong> from IOCB Prague and Jitka Viktorová from UCT Prague have identified new androstane-based steroid derivatives that can significantly improve the effectiveness of existing antibiotics against multidrug-resistant </strong><i><strong>Staphylococcus aureus</strong></i><strong>.</strong></p></div></div><div><p>The team screened dozens of natural steroidal hormones and synthetic derivatives to see whether they could block bacterial efflux pumps – mechanisms that bacteria use to eject antibiotics and survive treatment. Two compounds emerged as particularly promising: they inhibited efflux pumps and lowered the effective doses of antibiotics such as ciprofloxacin and erythromycin.</p><p>Further analysis showed that one of the compounds also suppressed genes linked to bacterial virulence. Another key finding is that the most active molecules are non-toxic to human immune cells and showed no detectable endocrine activity, suggesting a favorable safety profile.</p><p>These findings support the idea that rationally designed steroid-based molecules could act as antibiotic adjuvants, helping existing drugs overcome bacterial resistance.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/IOCB_Prague_Steroidal_hormones_and_neurosteroids_novel_therapeutic_strategies_in_bacterial_infections_8e5d2a7b48.jpg" alt="IOCB Prague: Steroidal hormones and neurosteroids – novel therapeutic strategies in bacterial infections" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_IOCB_Prague_Steroidal_hormones_and_neurosteroids_novel_therapeutic_strategies_in_bacterial_infections_8e5d2a7b48.jpg 222w," sizes="100vw" width="1258" height="886"></p><blockquote><h4><strong>Original Article</strong></h4><h4><a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0223523426001613?via%3Dihub"><strong>Steroidal hormones and neurosteroids - novel therapeutic strategies in bacterial infections: Design, synthesis, and biological evaluation</strong></a></h4><p>Daniela Brdová, Bára Křížkovská, Jan Špaček, Zdeněk Míchal, Eva Jablonská, Ondřej Strnad, Hana Chodounská, Eszter Szánti-Pintér, Marina Morozovová, Václav Hanžl, Jan Tkadlec, Martijn Riool, Jan Lipov, Jitka Viktorová, Eva Kudová&nbsp;</p><p><i><strong>Eur. J. Med. Chem., 2026, 308, 118716</strong></i></p><p><a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1016/j.ejmech.2026.118716">https://doi.org/10.1016/j.ejmech.2026.118716</a></p><h6>licensed under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/"><strong>CC-BY 4.0</strong></a></h6></blockquote><h4><strong>Abstract</strong></h4><p>The global rise of antibiotic resistance necessitates novel therapeutic strategies for infectious diseases. Inhibition of bacterial efflux pumps, which contribute to multidrug resistance, represents a promising approach to restore or even increase the efficacy of existing antibiotics. Using fluorescence-based ethidium bromide accumulation, broth microdilution, and checkerboard assays, we evaluated 26 endogenous steroidal hormones and neurosteroids, along with 30 synthetic derivatives, for their ability to enhance antibiotic susceptibility in multidrug-resistant <i>Staphylococcus aureus</i>. Structure-activity relationship analysis identified compounds <strong>13</strong> and <strong>16</strong> as lead candidates, exhibiting strong efflux pump inhibition and marked reductions in the minimum inhibitory concentrations of ciprofloxacin and erythromycin. Both compounds showed additive effects in checkerboard assays. Modifications at C-3 (polar substitution) and C-17 (3α,5β-stereochemistry and nonpolar substitution) were essential for potent efflux inhibition and sensitization, although these modifications were not additive when combined. Transcriptome analysis further revealed that compound <strong>13</strong> significantly downregulated <i>S. aureus</i> virulence-associated genes when administered alone or in combination with antibiotics. Cytotoxicity assessment in human peripheral blood mononuclear cells and receptor transactivation assays for estrogen, androgen, and progesterone receptors indicated that the most active derivatives were non-toxic and lacked detectable endocrine activity, suggesting a favorable safety profile. Overall, these findings support the concept that rationally designed andostane-based steroidal scaffolds can function as competitive bacterial efflux pump inhibitors and serve as potential antibiotic adjuvants to mitigate efflux-mediated resistance.</p><h4><strong>Instrumentation</strong></h4><h5><strong>Structural characterization</strong></h5><ul><li><strong>AVANCE III 400 MHz NMR spectrometer</strong> (Bruker)</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=3&amp;search=LTQ+Orbitrap+XL"><strong>LTQ Orbitrap XL HRMS</strong></a> (Thermo Fisher Scientific, ESI)</li></ul></div>

Steroidal hormones and neurosteroids – novel therapeutic strategies in bacterial infections

<p><strong>Metformin is currently the first-line oral drug of choice for the treatment of type 2 diabetes. It reduces glucose production in the liver, improves tissue sensitivity to insulin, and does not cause weight gain or hypoglycemia, which sets it apart from some other antidiabetic drugs. Moreover, its long-term beneficial effects on the risk of cardiovascular complications and mortality in people with type 2 diabetes have been well established. Researchers from the Institute of Physiology CAS (IPHYS) have identified a new group of blood metabolites that could help physicians objectively monitor whether patients with type 2 diabetes are taking their metformin as prescribed.</strong></p><h4><strong>New biomarkers for metformin use</strong></h4><p>A team led by Tomáš Čajka from the Laboratory of Translational Metabolism at IPHYS analyzed plasma samples from <strong>637 patients with type 2 diabetes treated with metformin</strong> and <strong>143 non-diabetic controls</strong> using advanced metabolomics and lipidomics. Among 614 detected metabolites, they identified five from the group of <strong>N-lactoyl-amino acids </strong>(e.g. N‑lactoyl-phenylalanine), which had previously been seen as unknown signals due to missing reference spectra in databases. The levels of these metabolites in the blood closely reflected the plasma concentrations of metformin. In patients with the highest metformin exposure, the concentrations of these metabolites were up to 7.2 times higher than in controls.</p><h4><strong>A sensitive “fingerprint” of the drug’s effect</strong></h4><p>N-Lactoyl-amino acids are formed in cells by combining lactate and amino acids, thus reflecting the metformin-induced changes in cellular energy metabolism. “<i>Importantly, even though they occur in plasma only at nanomolar concentrations, they reliably distinguish patients who take metformin regularly from those who take it irregularly or not at all</i>,” emphasizes T. Čajka.</p><h4><strong>Metabolomics in practice and international collaboration</strong></h4><p>The study also provides a detailed description of broader metabolic changes in type 2 diabetes, including increases in lactate, organic acids, and branched-chain amino acids, as well as extensive remodelling of the lipid profile. In addition to T. Čajka’s team, collaborators from the Institute for <strong>Clinical and Experimental Medicine in Prague</strong> and the <strong>West Coast Metabolomics Center</strong> (University of California, Davis) also participated in the study.</p><p>The results demonstrate that advanced metabolomics approaches developed at IPHYS within the <strong>CarDia project</strong> can find highly practical applications both in clinical studies and in personalized monitoring of treatment in patients with diabetes.</p><blockquote><h4><strong>The original article</strong></h4><h4><a target="_blank" rel="noopener noreferrer" href="https://ascpt.onlinelibrary.wiley.com/doi/10.1002/cpt.70205"><strong>Untargeted Metabolomics Identifies N-Lactoyl-Amino Acids as Dose-Responsive Plasma Biomarkers of Metformin Adherence in Type 2 Diabetes</strong></a></h4><p>Tomas Cajka, Jiri Hricko, Lucie Rudl Kulhava, Michaela Paucova, Michaela Novakova, Veronika Hola, Stanislava Rakusanova, Oliver Fiehn, Vojtech Skop, Ivana Lankova, Iva Miskova, Terezie Pelikanova, Martin Haluzik</p><p>Clin Pharmacol Ther, 119: 1057-1069</p><p><a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1002/cpt.70205">https://doi.org/10.1002/cpt.70205</a></p><h6>licensed under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/"><strong>CC-BY 4.0</strong></a></h6></blockquote><h4><strong>Abstract</strong></h4><p>Metformin is the most widely prescribed antidiabetic drug, yet adherence remains difficult to objectively assess. Using untargeted metabolomics and lipidomics, we analyzed plasma from 637 patients with type 2 diabetes (T2D) with confirmed metformin use and 143 nondiabetic controls, annotating 614 metabolites. Patients were stratified by plasma metformin into sub-therapeutic, therapeutic, and supra-therapeutic groups, and associations were evaluated by multiple linear regression and composite metabolite ranking. Five previously unannotated features were structurally identified as N-lactoyl-amino acids, whose levels correlated strongly with plasma metformin (ρ = 0.42–0.55, P &lt; 0.0001) and increased up to 7.2-fold in the supra-therapeutic group (&gt; 2000 ng/mL). While N-lactoyl-amino acids were consistently detected in the nanomolar range, they still displayed robust and dose-dependent associations with metformin. Broader metabolic changes in T2D included elevated lactate, organic acids, and branched-chain amino acids, together with reduced urea cycle metabolites. Lipidomics showed increases in saturated triacylglycerols and diacylglycerols and decreases in cholesteryl esters, sphingomyelins, and phospholipids. These findings establish N-lactoyl-amino acids as robust, dose-responsive plasma biomarkers of metformin exposure. Despite being up to four orders of magnitude less abundant than their amino acid precursors, they sensitively reflect mitochondrial lactate overflow and pharmacodynamic adaptation, offering objective assessment of adherence.</p>

New blood biomarkers reveal how faithfully diabetes patients take metformin

Article

Product

Environment

Food

Health

Scientific article

Science and research

Laboratories

The Czech Academy of Sciences (CAS) was established by Act No. 283/1992 Coll. as the Czech successor of the former Czechoslovak Academy of Sciences. It is set up as a complex of 54 public research institutions.

Czech Academy of Sciences

The Institute of Organic Chemistry and Biochemistry of the Czech Academy of Sciences (IOCB Prague) is a leading scientific institution in the Czech Republic, recognized internationally. Its primary mission is basic research in the fields of chemical biology and medicinal chemistry, organic and material oriented chemistry, chemistry of natural compounds, biochemistry and molecular biology, physical chemistry, theoretical chemistry, and analytical chemistry. 

Institute of Organic Chemistry and Biochemistry of the Czech Academy of Sciences

Organomation, founded in 1959, designs and manufactures high-quality nitrogen evaporators and extraction systems. Known for innovation and durability, their lab instruments are used globally for efficient sample preparation with strong customer support.

Organomation

Phenomenex Biozen SEC-3 LC columns

High inertness and particle consistency of both Biozen™ SEC columns drives greater reproducibility from injection-to-injection. 

<p><strong>High inertness and particle consistency </strong>of both Biozen™ SEC columns drives greater reproducibility from injection-to-injection. Combine this with the bioinert <strong>BioTi hardware</strong> and good aggregate recovery is no longer something that you’re missing out on.</p><p><strong>Biozen SEC columns provide:</strong></p><ul><li>High efficiency on both HPLC and UHPLC</li><li>Extreme inertness and robustness</li><li>Finely tuned high and low MS separation windows</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Biozen_SEC_3_3a6e232271.webp" alt="Phenomenex: Biozen SEC-3" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Biozen_SEC_3_3a6e232271.webp 245w," sizes="100vw" width="500" height="150"></p><ul><li><strong>Separation Mode:</strong> Gel Filtration Chromatography (GFC)</li><li><strong>Particle Size:</strong> 1.8</li><li><strong>Recommended Use:</strong> High molecular weight (HMW) separation range of 10 k – 700 kDa</li></ul><h3><strong>Phenomenex Biozen Biologics LC Columns</strong></h3><p>With a new titanium <strong>BioTi™</strong> biocompatible <strong>hardware</strong> to minimize priming, <strong>four particle platforms</strong> for optimal versatility and <strong>nine particle chemistries</strong> to maximize selectivity and sensitivity, Biozen UHPLC/HPLC columns for <strong>protein analysis</strong> are seamlessly designed to bring peace of mind to your analysis of biologics through:</p><ul><li>Charge Variant Analysis</li><li>Aggregate Analysis</li><li>Peptide Mapping</li><li>Intact Mass Analysis</li><li>Intact and Subunit Analysis</li><li>Glycan Analysis</li><li>Peptide Quantitation</li><li>Drug Antibody Ratio (DAR)</li><li>Oligonucleotide Characterization</li></ul><h3><strong>Biocompatible Flow Path with BioTi™ Hardware</strong></h3><p>Keep your mind at ease knowing that we’ve minimized the need for priming with a new titanium infused biocompatible hardware and frit that doesn’t interfere with protein or peptide integrity!</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Bio_Ti_Hardware_991fb53395.jpg" alt="Phenomenex: BioTi Hardware" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Bio_Ti_Hardware_991fb53395.jpg 245w," sizes="100vw" width="1378" height="426"></p><h3><strong>4 Advanced Particle Platforms</strong></h3><p>All four of the Biozen particle platforms were individually designed and built by Phenomenex to take advantage of integral levels of performance, ruggedness, and reproducibility for protein characterization applications. Individually, each platform differs in the proprietary processing techniques used to control particle size and morphology.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Advanced_Particle_Platforms_a0959aca03.jpg" alt="Phenomenex: Advanced Particle Platforms" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Advanced_Particle_Platforms_a0959aca03.jpg 245w," sizes="100vw" width="1439" height="868"></p>

Phenomenex Biozen SEC-2 LC columns

Biozen SEC columns are extremely inert, high density fully porous particle with high efficiency and low molecular weight separation range.

<p><strong>Biozen SEC columns</strong> are extremely inert, high density fully porous particle with high efficiency and low molecular weight (LMW) <strong>separation range</strong> of <strong>1 k – 450 kDa</strong>.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Biozen_SEC_3_3a6e232271.webp" alt="Phenomenex: Biozen SEC-2" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Biozen_SEC_3_3a6e232271.webp 245w," sizes="100vw" width="500" height="150"></p><ul><li><strong>Separation Mode:</strong> Gel Filtration Chromatography (GFC)</li><li><strong>Particle Size:</strong> 1.8</li><li><strong>Recommended Use:</strong> Low molecular weight (LMW) separation range of 1 k – 450 kDa</li></ul><h3><strong>Phenomenex Biozen Biologics LC Columns</strong></h3><p>With a new titanium <strong>BioTi™</strong> biocompatible <strong>hardware</strong> to minimize priming, <strong>four particle platforms</strong> for optimal versatility and <strong>nine particle chemistries</strong> to maximize selectivity and sensitivity, Biozen UHPLC/HPLC columns for <strong>protein analysis</strong> are seamlessly designed to bring peace of mind to your analysis of biologics through:</p><ul><li>Charge Variant Analysis</li><li>Aggregate Analysis</li><li>Peptide Mapping</li><li>Intact Mass Analysis</li><li>Intact and Subunit Analysis</li><li>Glycan Analysis</li><li>Peptide Quantitation</li><li>Drug Antibody Ratio (DAR)</li><li>Oligonucleotide Characterization</li></ul><h3><strong>Biocompatible Flow Path with BioTi™ Hardware</strong></h3><p>Keep your mind at ease knowing that we’ve minimized the need for priming with a new titanium infused biocompatible hardware and frit that doesn’t interfere with protein or peptide integrity!</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Bio_Ti_Hardware_991fb53395.jpg" alt="Phenomenex: BioTi Hardware" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Bio_Ti_Hardware_991fb53395.jpg 245w," sizes="100vw" width="1378" height="426"></p><h3><strong>4 Advanced Particle Platforms</strong></h3><p>All four of the Biozen particle platforms were individually designed and built by Phenomenex to take advantage of integral levels of performance, ruggedness, and reproducibility for protein characterization applications. Individually, each platform differs in the proprietary processing techniques used to control particle size and morphology.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Advanced_Particle_Platforms_a0959aca03.jpg" alt="Phenomenex: Advanced Particle Platforms" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Advanced_Particle_Platforms_a0959aca03.jpg 245w," sizes="100vw" width="1439" height="868"></p>

Phenomenex Biozen dSEC-2 LC columns

Biozen dSEC columns use low-pore silica with a proprietary hydrophilic diol bond to prevent silica-protein interactions.

<p><strong>Advanced SEC Silica Particle Technology and Surface Chemistry for Characterizing Biomolecules</strong></p><p>The <strong>Biozen dSEC columns</strong> are packed with low pore volume silica coupled with a proprietary hydrophilic diol-type bonded surface chemistry that prevents the silica surface from interacting with <strong>protein samples</strong>.</p><ul><li>Exceptionally Robust, Pore Controlled SEC Particle</li><li>Extreme Stability and Exceptional Lifetime</li><li>Reproducible Separations</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Biozen_dsec_63af9af237.webp" alt="Phenomenex: Biozen-dSEC-2" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Biozen_dsec_63af9af237.webp 245w," sizes="100vw" width="500" height="150"></p><ul><li><strong>Separation Mode:</strong> Gel Filtration Chromatography (GFC)</li><li><strong>Pore size</strong>: 200</li><li><strong>Particle Size:</strong> 1.8, 3</li><li><strong>Recommended Use:</strong> Analysis of monoclonal antibodies, biosimilars and other biomolecules by using specific molecular weights with improved column lifetimes and recovery</li></ul><h4><strong>Biozen SEC Proprietary Silica Particle Technology</strong></h4><p>The Biozen dSEC columns are packed with low pore volume silica coupled with a proprietary hydrophilic diol-type bonded surface chemistry that prevents the silica surface from interacting with protein samples.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Biozen_SEC_Proprietary_Silica_Particle_Technology_502218b910.jpg" alt="Phenomenex: Biozen SEC Proprietary Silica Particle Technology" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Biozen_SEC_Proprietary_Silica_Particle_Technology_502218b910.jpg 245w," sizes="100vw" width="1448" height="469"></p><h4><strong>Improved Column Lifetime and Performance Stability</strong></h4><p>Phenomenex’s optimized SEC column loading technology has significantly improved the overall packing density and silica distribution of the columns leading to improved chromatographic lifetime and stability.</p><h4><strong>New Standard for Platform SEC Methods</strong></h4><p>Whether IgG2 or IgG4 isotypes, bispecifics, or Fc-Fusions, dSEC-2 provides excellent separation and sample recovery for many different classes of antibodies and related recombinant proteins.</p><h3><strong>Phenomenex Biozen Biologics LC Columns</strong></h3><p>With a new titanium <strong>BioTi™</strong> biocompatible <strong>hardware</strong> to minimize priming, <strong>four particle platforms</strong> for optimal versatility and <strong>nine particle chemistries</strong> to maximize selectivity and sensitivity, Biozen UHPLC/HPLC columns for <strong>protein analysis</strong> are seamlessly designed to bring peace of mind to your analysis of biologics through:</p><ul><li>Charge Variant Analysis</li><li>Aggregate Analysis</li><li>Peptide Mapping</li><li>Intact Mass Analysis</li><li>Intact and Subunit Analysis</li><li>Glycan Analysis</li><li>Peptide Quantitation</li><li>Drug Antibody Ratio (DAR)</li><li>Oligonucleotide Characterization</li></ul><h3><strong>Biocompatible Flow Path with BioTi™ Hardware</strong></h3><p>Keep your mind at ease knowing that we’ve minimized the need for priming with a new titanium infused biocompatible hardware and frit that doesn’t interfere with protein or peptide integrity!</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Bio_Ti_Hardware_991fb53395.jpg" alt="Phenomenex: BioTi Hardware" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Bio_Ti_Hardware_991fb53395.jpg 245w," sizes="100vw" width="1378" height="426"></p><h3><strong>4 Advanced Particle Platforms</strong></h3><p>All four of the Biozen particle platforms were individually designed and built by Phenomenex to take advantage of integral levels of performance, ruggedness, and reproducibility for protein characterization applications. Individually, each platform differs in the proprietary processing techniques used to control particle size and morphology.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Advanced_Particle_Platforms_a0959aca03.jpg" alt="Phenomenex: Advanced Particle Platforms" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Advanced_Particle_Platforms_a0959aca03.jpg 245w," sizes="100vw" width="1439" height="868"></p>

Phenomenex Biozen dSEC-7 LC columns

dSEC-7 optimizes dimensions to save sample, speed up runs, and enhance resolution for AAVs and large biomolecule separations.

<p><strong>AAV and Large Biomolecule Aggregate Analysis​</strong></p><p><strong>Biozen dSEC-7 columns</strong> are packed with <strong>700 Å large pore silica</strong> coupled with a proprietary hydrophilic diol-type bonded surface chemistry that ensures silica surface interactions are mitigated. Designed with optimized column dimensions, dSEC-7 conserves valuable sample consumption, facilitates faster run times, and maximizes resolution for AAVs and large biomolecule separations.</p><p><strong>Robust and reliable aggregate analysis:</strong></p><ul><li>Baseline resolution of monomer/aggregate species through 700 Å pore size</li><li>Reduction in sample consumption by up to 90 % compared to traditional SEC columns</li><li>Reduction in method times by up to 50 % when compared to traditional SEC columns</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Biozen_dsec_63af9af237.webp" alt="Phenomenex: Biozen-dSEC-7" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Biozen_dsec_63af9af237.webp 245w," sizes="100vw" width="500" height="150"></p><ul><li><strong>Separation Mode:</strong> Gel Filtration Chromatography (GFC)</li><li><strong>Pore size</strong>: 700</li><li><strong>Recommended Use:</strong> Aggregate analysis of AAVs and other large biomolecules using specific molecular weights that conserves sample consumption, facilitates faster run times, and maximizes resolution.</li></ul><h4><strong>An SEC Column for AAV Aggregate Analysis</strong></h4><figure class="image"><img style="aspect-ratio:668/575;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Biozen_d_SEC_7_Column_b307c4217d.jpg" alt="Phenomenex: Biozen dSEC-7 Column" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Biozen_d_SEC_7_Column_b307c4217d.jpg 182w," sizes="100vw" width="668" height="575"></figure><h4><strong>Biozen dSEC-7 Features</strong></h4><h5><strong>Improved Loading</strong></h5><ul><li>dSEC-7 addresses the challenge of aggregate analysis by offering accurate detection and separation with injections as low as 0.5 µL. Unlike traditional methods that demand large sample volumes, dSEC-7 conserves valuable samples, allowing for replicate analyses and ensuring availability for other CQA tests.</li></ul><h5><strong>Mobile Phase Flexibility</strong></h5><ul><li>dSEC-7’s particle properties facilitate robust separation of monomer from aggregate species, regardless of which mobile phase best suits your sample. This ensures reproducible results while accommodating unique sample demands, easing the burden of method condition optimization during development.</li></ul><h5><strong>Serotype Versatility</strong></h5><ul><li>With its robust performance and 700 Å pore size, dSEC-7 effectively resolves monomer from aggregate peaks across various AAV serotypes. This capability is crucial for evaluating appropriate serotype candidates, each varying in its unique tissue and cell tropisms, to ensure desired therapeutic outcomes are achieved.</li></ul><h5><strong>Instrument Agnostic Performance</strong></h5><ul><li>Despite differences in dwell volume and dispersion across various sites and departments, dSEC-7 consistently delivers robust and reproducible performance across commercially available LC instrumentation. This ensures reliable results regardless of variations in equipment, setup, or location.</li></ul><h5><strong>Outperforms Trending Solutions</strong></h5><ul><li>dSEC-7 excels in providing superior resolution over market alternatives, particularly when characterizing higher-level aggregates in AAV analysis. Unlike current market solutions with insufficient particle pore size, dSEC-7 ensures accurate and reproducible separation of AAV monomer from aggregates.</li></ul><h5><strong>Enhanced Detector Flexibility</strong></h5><ul><li>Conquer sample limitations using SEC-FLR for heightened sensitivity, SEC-MALS for precise molecular weight determination, or SEC-UV for routine analysis. Achieving comprehensive AAV characterization insights by transferring methods across detector technologies with unique benefits is now seamless.</li></ul><h3><strong>Phenomenex Biozen Biologics LC Columns</strong></h3><p>With a new titanium <strong>BioTi™</strong> biocompatible <strong>hardware</strong> to minimize priming, <strong>four particle platforms</strong> for optimal versatility and <strong>nine particle chemistries</strong> to maximize selectivity and sensitivity, Biozen UHPLC/HPLC columns for <strong>protein analysis</strong> are seamlessly designed to bring peace of mind to your analysis of biologics through:</p><ul><li>Charge Variant Analysis</li><li>Aggregate Analysis</li><li>Peptide Mapping</li><li>Intact Mass Analysis</li><li>Intact and Subunit Analysis</li><li>Glycan Analysis</li><li>Peptide Quantitation</li><li>Drug Antibody Ratio (DAR)</li><li>Oligonucleotide Characterization</li></ul><h3><strong>Biocompatible Flow Path with BioTi™ Hardware</strong></h3><p>Keep your mind at ease knowing that we’ve minimized the need for priming with a new titanium infused biocompatible hardware and frit that doesn’t interfere with protein or peptide integrity!</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Bio_Ti_Hardware_991fb53395.jpg" alt="Phenomenex: BioTi Hardware" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Bio_Ti_Hardware_991fb53395.jpg 245w," sizes="100vw" width="1378" height="426"></p><h3><strong>4 Advanced Particle Platforms</strong></h3><p>All four of the Biozen particle platforms were individually designed and built by Phenomenex to take advantage of integral levels of performance, ruggedness, and reproducibility for protein characterization applications. Individually, each platform differs in the proprietary processing techniques used to control particle size and morphology.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Advanced_Particle_Platforms_a0959aca03.jpg" alt="Phenomenex: Advanced Particle Platforms" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Advanced_Particle_Platforms_a0959aca03.jpg 245w," sizes="100vw" width="1439" height="868"></p>

KNAUER AppliChrom® ABOA DMAc-Phil GPC Columns

Organic polymer base material with high porosity for high resolution

<p class="cke-user_style-important"><strong>AppliChrom® GPC columns for organic GPC analyses in DMAc or DMF</strong></p><h4><strong>Properties:</strong></h4><ul><li>Organic polymer base material with high porosity for high resolution</li><li>Wide range of porosities and particle sizes</li><li><strong>Pressure stability:</strong> up to 150 bar</li><li><strong>Stable between: </strong>35-145 °C</li><li><strong>Excellent reproducibility</strong> and resolution due to the advanced packing procedure</li><li><strong>High purity</strong> to eliminate adsorptive effects and combine pure GPC with long lifetime</li><li><strong>GPC range from:</strong> 100-1 000 000 Da</li><li><strong>Optimal for: </strong>0.5 ml/min flow rates with 8 mm ID colums</li><li><strong>Recommended eluents: </strong>DMAc, DMF, NMP, LiBr additive</li></ul><h4><strong>Applications</strong></h4><p><strong>Slightly polar analytes like:</strong></p><ul><li>PMMA, polyacryl nitril (PAN), acrylnitrile butadiene styrene (ABS), cellulose, and all DMF and DMAc soluble polymers</li></ul><h3><strong>GPC &amp; SEC Columns</strong></h3><p><strong>GPC &amp; SEC systems offer solutions for various applications and laboratories</strong></p><p>Gel permeation chromatography (GPC) and size exclusion chromatography (SEC) separate analytes by size using special columns with a porous matrix. The basic separation principle is based on the fact that smaller molecules penetrate these pores more strongly and therefore move more slowly through the matrix than larger molecules. GPC/SEC is often used as gentle and powerful purification technique or for quality control in research and development. Typical target molecules are polymers, dissolved in organic solvents for GPC, and macro biomolecules like proteins, antibodies or polysaccharides, dissolved in aqueous eluents for SEC.</p><p>Separation is facilitated by selecting optimal particle and pore sizes. Therefore we offer a <strong>wide range of pore sizes</strong> (35, 100, 150, 250, 350, 500, 1000, 1500, 10E5, 10E6, 10E7 Å) and <strong>several particle sizes</strong> (5, 7, 10, 12, 20 µm) as a choice to customize for every application task.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Size_Exclusion_principle_2a432edcc1.webp" alt="KNAUER: Size Exclusion - principle" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Size_Exclusion_principle_2a432edcc1.webp 228w," sizes="100vw" width="1024" height="700"></p><h3><strong>KNAUER AppliChrom® ABOA columns for aqueous SEC, organic GPC, and special applications</strong></h3><ul><li>AppliChrom® ABOA StyDiViBe Series GPC-columns for GPC analysis of organic molecules using THF, toluene, chloroform.</li><li>AppliChrom ABOA SuperOH-P Series for aqueous GPC/SEC-analysis of mainly neutral and anionic polymers like heparins, polysaccharides, PEO,<br>PEG,....</li><li>AppliChrom® ABOA DMSO-Phil-P Series for DMSO GPC/SEC analysis (humic substances, UF/MUF-glue, p-NIPA, many polycondensates, protein from pea or leguminosae,...)</li><li>AppliChrom® ABOA DMAc-Phil-P Series for GPC/ SEC analysis in DMAc, DMF, NMP. Good for many medium polar substances, polyoxazolines, lignin,...</li><li>AppliChrom® ABOA Cat-Phil-P Series for aqueous GPC/SEC-analysis of special aminic and polycationic polymers like p-DADMAc, PEI/ polyethylenimin, chitosan, copolymers with polyaminofunctions, but also useful for polyanions or neutral polymers like heparin or PEO/PEG, dextran or pullulan.</li><li><strong>Seperation Ranges: </strong>100–50 000 000 Da</li></ul><h4><strong>You decide between classical GPC/SEC columns with conventional mixed pore technology or AppliChrom® BPT technology:</strong></h4><p>Separate oligomers and polymers with the new GPC media line from AppliChrom® BPT synthesis technology for large range, high resolution separations with increased accuracy in calibration (patent pending).</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg" alt="KNAUER: AppliChrom® ABOA columns." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg 245w," sizes="100vw" width="1379" height="718"></p>

KNAUER AppliChrom® ABOA DMSO-Phil GPC Columns

AppliChrom® DMSO-PHIL optimized for DMSO-GPC applications from an interaction-free pure GPC base material

<p class="cke-user_style-important"><strong>AppliChrom® DMSO-PHIL optimized for DMSO-GPC applications</strong></p><h4><strong>Properties:</strong></h4><ul><li>Interaction-free pure GPC base material</li><li><strong>Temperature stabel between:</strong> 40-90 °C (145 °C) depending on application</li><li><strong>Simple, reliable and robust </strong>GPC &amp; SEC calibration from dextrans, pullulans et al.</li><li><strong>Low column bleed</strong> for low detector gain for improved refractive index, light scattering or viscosity detection</li><li><strong>12 µm particle technology</strong> for low back pressure</li><li>Tolerates traces of water and NaNO₃ additve</li><li><strong>Large volume and optimized mass transfer</strong> for polymers with optimized resolution</li><li><strong>Low cost due to long column lifetime</strong> - result of the combination of optimized particle and packing technology</li><li><strong>Recommended eluents:</strong> DMSO, 0.075 M NaNO₃</li></ul><h4><strong>Applications</strong></h4><p><strong>Polar, not water soluble oligomers or polymers like:</strong></p><ul><li>polysaccharides, lignin, amylose, starch, humic acids, polyvenyl pyridin, PNIPA, polyvinyl alcohol (PVA), melamin-urea-formaldehyd resin (MUF) or urea-formaldehyd resin (UF)</li></ul><h3><strong>GPC &amp; SEC Columns</strong></h3><p><strong>GPC &amp; SEC systems offer solutions for various applications and laboratories</strong></p><p>Gel permeation chromatography (GPC) and size exclusion chromatography (SEC) separate analytes by size using special columns with a porous matrix. The basic separation principle is based on the fact that smaller molecules penetrate these pores more strongly and therefore move more slowly through the matrix than larger molecules. GPC/SEC is often used as gentle and powerful purification technique or for quality control in research and development. Typical target molecules are polymers, dissolved in organic solvents for GPC, and macro biomolecules like proteins, antibodies or polysaccharides, dissolved in aqueous eluents for SEC.</p><p>Separation is facilitated by selecting optimal particle and pore sizes. Therefore we offer a <strong>wide range of pore sizes</strong> (35, 100, 150, 250, 350, 500, 1000, 1500, 10E5, 10E6, 10E7 Å) and <strong>several particle sizes</strong> (5, 7, 10, 12, 20 µm) as a choice to customize for every application task.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Size_Exclusion_principle_2a432edcc1.webp" alt="KNAUER: Size Exclusion - principle" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Size_Exclusion_principle_2a432edcc1.webp 228w," sizes="100vw" width="1024" height="700"></p><h3><strong>KNAUER AppliChrom® ABOA columns for aqueous SEC, organic GPC, and special applications</strong></h3><ul><li>AppliChrom® ABOA StyDiViBe Series GPC-columns for GPC analysis of organic molecules using THF, toluene, chloroform.</li><li>AppliChrom ABOA SuperOH-P Series for aqueous GPC/SEC-analysis of mainly neutral and anionic polymers like heparins, polysaccharides, PEO,<br>PEG,....</li><li>AppliChrom® ABOA DMSO-Phil-P Series for DMSO GPC/SEC analysis (humic substances, UF/MUF-glue, p-NIPA, many polycondensates, protein from pea or leguminosae,...)</li><li>AppliChrom® ABOA DMAc-Phil-P Series for GPC/ SEC analysis in DMAc, DMF, NMP. Good for many medium polar substances, polyoxazolines, lignin,...</li><li>AppliChrom® ABOA Cat-Phil-P Series for aqueous GPC/SEC-analysis of special aminic and polycationic polymers like p-DADMAc, PEI/ polyethylenimin, chitosan, copolymers with polyaminofunctions, but also useful for polyanions or neutral polymers like heparin or PEO/PEG, dextran or pullulan.</li><li><strong>Seperation Ranges: </strong>100–50 000 000 Da</li></ul><h4><strong>You decide between classical GPC/SEC columns with conventional mixed pore technology or AppliChrom® BPT technology:</strong></h4><p>Separate oligomers and polymers with the new GPC media line from AppliChrom® BPT synthesis technology for large range, high resolution separations with increased accuracy in calibration (patent pending).</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg" alt="KNAUER: AppliChrom® ABOA columns." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg 245w," sizes="100vw" width="1379" height="718"></p>

KNAUER AppliChrom® ABOA HFIP-Phil GPC Columns

AppliChrom® GPC columns for separations in HFIP with broad pore technology for GPC for analytes with challenging solution behavior

<p class="cke-user_style-important"><strong>AppliChrom® GPC columns for separations in HFIP</strong></p><h4><strong>Properties:</strong></h4><ul><li>Broad pore technology for GPC for analytes with challenging solution behavior</li><li><strong>Separation range beween:</strong> 0.1–50 000 kDa</li><li>Range of individual porosities that can be used individually or in combination</li><li><strong>Temperature stable between:</strong> 35–145 °C</li><li><strong>Long column lifetime</strong> - result of the combination of optimized particle and packing technology</li><li><strong>Low column bleed</strong> for low detector noise</li><li><strong>Excellent reproducibility and resolution</strong> due to the advanced packing procedure</li><li><strong>Calibration standard:</strong> PMMA or PEO &nbsp;</li><li><strong>Recommended eluents</strong>: Hexafluoroisopropanol (HFIP), 0.1 % KTFa as modifier</li></ul><h4><strong>Applications</strong></h4><p><strong>Crystalline highperformance polymers like:&nbsp;</strong></p><ul><li>polyamides (PA), polyethylen terepthalate (PET), polybutylen terepthalate (PBT), polylactic acid (PLA), polyamid 6 (PA6), polycaprolactam, paraformaldehyde, polyoxymethylene (POM), polyacetal, several polyoxazolines</li></ul><h3><strong>GPC &amp; SEC Columns</strong></h3><p><strong>GPC &amp; SEC systems offer solutions for various applications and laboratories</strong></p><p>Gel permeation chromatography (GPC) and size exclusion chromatography (SEC) separate analytes by size using special columns with a porous matrix. The basic separation principle is based on the fact that smaller molecules penetrate these pores more strongly and therefore move more slowly through the matrix than larger molecules. GPC/SEC is often used as gentle and powerful purification technique or for quality control in research and development. Typical target molecules are polymers, dissolved in organic solvents for GPC, and macro biomolecules like proteins, antibodies or polysaccharides, dissolved in aqueous eluents for SEC.</p><p>Separation is facilitated by selecting optimal particle and pore sizes. Therefore we offer a <strong>wide range of pore sizes</strong> (35, 100, 150, 250, 350, 500, 1000, 1500, 10E5, 10E6, 10E7 Å) and <strong>several particle sizes</strong> (5, 7, 10, 12, 20 µm) as a choice to customize for every application task.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Size_Exclusion_principle_2a432edcc1.webp" alt="KNAUER: Size Exclusion - principle" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Size_Exclusion_principle_2a432edcc1.webp 228w," sizes="100vw" width="1024" height="700"></p><h3><strong>KNAUER AppliChrom® ABOA columns for aqueous SEC, organic GPC, and special applications</strong></h3><ul><li>AppliChrom® ABOA StyDiViBe Series GPC-columns for GPC analysis of organic molecules using THF, toluene, chloroform.</li><li>AppliChrom ABOA SuperOH-P Series for aqueous GPC/SEC-analysis of mainly neutral and anionic polymers like heparins, polysaccharides, PEO,<br>PEG,....</li><li>AppliChrom® ABOA DMSO-Phil-P Series for DMSO GPC/SEC analysis (humic substances, UF/MUF-glue, p-NIPA, many polycondensates, protein from pea or leguminosae,...)</li><li>AppliChrom® ABOA DMAc-Phil-P Series for GPC/ SEC analysis in DMAc, DMF, NMP. Good for many medium polar substances, polyoxazolines, lignin,...</li><li>AppliChrom® ABOA Cat-Phil-P Series for aqueous GPC/SEC-analysis of special aminic and polycationic polymers like p-DADMAc, PEI/ polyethylenimin, chitosan, copolymers with polyaminofunctions, but also useful for polyanions or neutral polymers like heparin or PEO/PEG, dextran or pullulan.</li><li><strong>Seperation Ranges: </strong>100–50 000 000 Da</li></ul><h4><strong>You decide between classical GPC/SEC columns with conventional mixed pore technology or AppliChrom® BPT technology:</strong></h4><p>Separate oligomers and polymers with the new GPC media line from AppliChrom® BPT synthesis technology for large range, high resolution separations with increased accuracy in calibration (patent pending).</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg" alt="KNAUER: AppliChrom® ABOA columns." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg 245w," sizes="100vw" width="1379" height="718"></p>

Watrex DeltaGel GPC/SEC columns

Do you need a GPC column for SEC chromatography in organic solvents at an affordable price? Our Watrex Deltagel™ are just what you are looking for!

<p><strong>Watrex DeltaGel™</strong> are special mixed-bed GPC columns for <strong>SEC chromatography</strong> in organic solvents.</p><p>The columns are based on <strong>polystyrene</strong> and are intended especially for <strong>separation of synthetic polymers</strong> in organic solvents.</p><p>We offer <strong>4 variants of columns</strong> that differ in their separation range.</p><p>Columns are available in various sizes for both <strong>analytical</strong> and <strong>preparative</strong> applications.</p><h3><strong>Linear range:</strong></h3><ul><li><strong>DeltaGel Mixed-E</strong> (0 - 33 000 Da)</li><li><strong>DeltaGel Mixed-D</strong> (1 000 - 200 000 Da)</li><li><strong>DeltaGel Mixed-C</strong> (5 000 - 500 000 Da)</li><li><strong>DeltaGel Mixed-B</strong> (20 000 - 7 000 000)</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Delta_Gel_GPC_SEC_kolony_7dfd459a06/Watrex-DeltaGel-GPC-SEC-kolony.jpg" alt="Watrex: DeltaGel GPC SEC columns for the separation of synthetic polymers"></p><h3><strong>Ordering information:</strong></h3><h5><strong>PN/Component:</strong></h5><ul><li><strong>DGB.25020</strong> Watrex 250x20 mm DeltaGel™ Mixed-B, 5 um</li><li><strong>DGC.25020</strong> Watrex 250x20 mm DeltaGel™ Mixed-C, 5 um</li><li><strong>DGD.25020</strong> Watrex 250x20 mm DeltaGel™ Mixed-D, 5 um</li><li><strong>DGE.25020</strong> Watrex 250x20 mm DeltaGel™ Mixed-E, 5 um</li><li><strong>DGB.3008</strong> Watrex 300x8 mm DeltaGel™ Mixed-B, 5 um (<strong>Price 1 269 € ex VAT</strong>)</li><li><strong>DGC.3008</strong> Watrex 300x8 mm DeltaGel™ Mixed-C, 5 um (<strong>Price 1 269 € ex VAT</strong>)</li><li><strong>DGD.3008</strong> Watrex 300x8 mm DeltaGel™ Mixed-D, 5 um (<strong>Price 1 269 € ex VAT</strong>)</li><li><strong>DGE.3008</strong> Watrex 300x8 mm DeltaGel™ Mixed-E, 5 um (<strong>Price 1 269 € ex VAT</strong>)</li><li><strong>DGB.25020G</strong> WATREX 30x20 mm DeltaGel™ Mixed-B, 5um, Guard Column</li><li><strong>D2K4101927</strong> Derivatizating agents AQC 5x3 mg</li><li><strong>DGB.0508 </strong>WATREX 50×8mm DeltaGel 5 um, Guard column (<strong>Price 390 € ex VAT</strong>)</li></ul>

Waters SEC Columns

Get unmatched batch-to-batch reproducibility with the wide range of Waters Size-Exclusion Chromatography (SEC) Columns and standards for protein and peptide characterization.

<h4><strong>Size-based separations of peptides, proteins, nucleic acids, LNPs, and viral vectors</strong></h4><p>Get unmatched batch-to-batch reproducibility with the wide range of <strong>Waters Size-Exclusion Chromatography (SEC) Columns</strong> and standards for protein and peptide characterization.</p><p><strong>SEC</strong> is a powerful technique for aggregate and fragment analysis in the <strong>research, development</strong>, and <strong>manufacturing of biotherapeutic proteins</strong>, such as <strong>insulin</strong> and <strong>monoclonal antibodies</strong> (mAb). With SEC, also known as gel filtration, you can separate proteins based on their size (hydrodynamic radii versus absolute molecular weight) in solution, with larger sized species eluting before smaller proteins.</p><p>The <strong>pore size and volume</strong> of the SEC particles used in the packed column drives this <strong>isocratic based technique</strong>, so the column you choose matters. As the molecular weight of the proteins of interest increases, SEC columns with comparatively larger pore size particles are selected.</p><h4><strong>Overview</strong></h4><ul><li>Gain efficiency with this “platform based” method for <strong>proteins ranging from 10,000 to 650,000 Daltons</strong>, leveraging <strong>MaxPeak Premier Technology</strong> coupled with <strong>BEH-PEO Particle Technology&nbsp;</strong> &nbsp;&nbsp;</li><li><strong>Minimize non-desired secondary interactions </strong>for improved separation reproducibility and results with Ethylene Bridged Hybrid (BEH) SEC particles</li><li>Ensure reliable <strong>column-to-column and batch-to-batch performance</strong> with columns quality control tested with relevant peptide, protein, and mAb samples &nbsp;</li><li>Achieve reliable <strong>high throughput analysis on UPLC</strong> systems with our <strong>1.7 µm particle size</strong> offering and reproducible separations on any <strong>HPLC, UHPLC, or UPLC system</strong> to address different application needs with <strong>2.5 µm&nbsp;</strong></li><li><strong>Extend analytical column life</strong> and<strong> lower cost per analyses </strong>with SEC Guards&nbsp;</li><li>Confirm on-site SEC column and LC system performance with available BEH125, BEH200, BEH450, and mAb Size Variant Standards &nbsp;&nbsp;</li><li><strong>Manufactured in a cGMP, ISO 9001</strong> certified plant using stringent manufacturing protocols and ultra-pure reagents</li></ul><p><strong>Recommended Use: </strong>For size-based peptide, protein, and viral vector analyses.</p><h4><strong>System Dispersion Specifications for Column Recommendations</strong></h4><h5><strong>LC System Dispersions &lt;20 µL (UPLC)</strong></h5><ul><li>ACQUITY Premier Protein SEC 250 Å Guards and Columns</li><li>ACQUITY UPLC Protein BEH SEC 125 Å, 200 Å, and 450 Å Guards and Columns</li><li>1.7 µm guards and columns for low dispersion UPLC systems</li></ul><h5><strong>LC System Dispersions &gt;20 µL – ≤35 µL (UHPLC)</strong></h5><ul><li>XBridge Premier Protein SEC 250 Å Guards and Columns</li><li>XBridge Protein BEH SEC 125 Å, 200 Å, and 450 Å Guards and Columns</li><li>BioResolve mAb SEC Guards and Columns</li><li>2.5 µm guards and columns for UHPLC systems</li></ul><h5><strong>LC System Dispersions &gt;35 µL (HPLC)</strong></h5><ul><li>XBridge Protein BEH SEC 125 Å, 200 Å, and 450 Å Guards and Columns</li><li>XBridge Premier Protein SEC 250 Å Guards and Columns</li><li>BioResolve mAb SEC Guards and Columns</li><li>BioSuite SEC Guards and Columns</li><li>3.5 µm guards and columns for HPLC systems</li></ul><h4><strong>GTxResolve SEC Columns</strong></h4><h5><strong>GTxResolve Premier BEH SEC 450 Å Columns</strong></h5><ul><li>2.5 µm particle size columns for UHPLC and UPLC separations</li><li>Lower secondary interactions and lower noise suitable for platform methods</li><li>Low adsorption hardware necessary for analysis of biologics samples</li><li>450 Å pore size with up to 50% higher resolving power reducing need for sample consumption, resulting in faster analyses<ul><li><a target="_blank" rel="noopener noreferrer" href="https://www.waters.com/nextgen/us/en/products/columns/GTxResolve-sec-columns.html"><strong>Explore GTxResolve SEC Columns</strong></a></li></ul></li></ul><h5><strong>GTxResolve Premier SEC 1000 Å Columns</strong></h5><ul><li>3 µm columns for UHPLC and UPLC separations</li><li>1000 Å columns with high efficiency for aggregate analysis of GTx drugs with diameter of 80-200 nm</li><li>Low secondary interaction &amp; improved compatibility with universally applied detector, such as MALS</li><li>Low adsorption hardware necessary for analysis of biologics samples<ul><li><a target="_blank" rel="noopener noreferrer" href="https://www.waters.com/nextgen/us/en/products/columns/GTxResolve-sec-columns.html"><strong>Explore GTxResolve SEC Columns</strong></a></li></ul></li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_G_Tx_Resolve_SEC_Columns_1b8741a62b.jpg" alt="Waters: GTxResolve SEC Columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_G_Tx_Resolve_SEC_Columns_1b8741a62b.jpg 234w," sizes="100vw" width="1024" height="682"></p><h4><strong>Protein SEC Columns</strong></h4><h5><strong>ACQUITY Premier Protein SEC 250 Å Guards and Columns</strong></h5><ul><li>Sub-2-μm particle columns for UPLC separations</li><li>250 Å pore size</li><li>High throughput &amp; resolution SEC separations of biomolecules ranging from 10,000 to 650,000 Daltons on low dispersion UPLC Systems</li><li>Available SEC Guard Columns to extend analytical SEC Column life</li><li>Significantly reduce non-desired ionic and hydrophobic secondary interaction for desired SEC platform methods with MaxPeak Premier Technology and BEH-PEO SEC particle technology<ul><li><a target="_blank" rel="noopener noreferrer" href="https://www.waters.com/nextgen/us/en/products/columns/acquity-premier-columns.html"><strong>Explore ACQUITY Premier Protein BEH SEC Guards and Columns</strong></a></li></ul></li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_ACQUITY_Premier_Columns_featuring_Max_Peak_HPS_Technology_11a541350e.jpg" alt="Waters: ACQUITY Premier Columns featuring MaxPeak HPS Technology" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_ACQUITY_Premier_Columns_featuring_Max_Peak_HPS_Technology_11a541350e.jpg 234w," sizes="100vw" width="1024" height="682"></p><h5><strong>XBridge Premier Protein SEC 250 Å Guards and Columns</strong></h5><ul><li>2.5 μm particle columns for HPLC and UHPLC separations</li><li>250 Å pore size</li><li>High resolution SEC separations of biomolecules ranging from 10,000 to 650,000 Daltons on any LC system</li><li>Available SEC Guard Columns to extend analytical SEC Column life</li><li>Significantly reduce non-desired ionic and hydrophobic secondary interaction for desired SEC platform methods with MaxPeak Premier Technology and BEH-PEO SEC particle technology</li><li>Specifically designed and QC tested with NIST-based, mAb Size Variant Standard to help ensure batch-to-batch consistency<ul><li><a target="_blank" rel="noopener noreferrer" href="https://www.waters.com/waters/global/Waters-XBridge-Premier-Columns/nav.htm"><strong>Explore XBridge Premier Protein BEH SEC Columns</strong></a></li></ul></li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_X_Bridge_Premier_Columns_0230c90278.jpg" alt="Waters: XBridge Premier Columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_X_Bridge_Premier_Columns_0230c90278.jpg 193w," sizes="100vw" width="950" height="768"></p><h5><strong>BioResolve mAb SEC Guards and Columns</strong></h5><ul><li>2.5 μm particle columns for UPLC, UHPLC, and HPLC separations</li><li>200 Å pore size</li><li>Obtain reproducible, accurate quantitation of monoclonal antibodies (mAbs), associated high molecular weight aggregates (&gt;300,000 Da), and lower molecular weight fragments (e.g., &lt;100,000 Da)</li><li>Each packed column is tested with NIST-based, mAb size variant standard to help ensure batch-to-batch and column-to-column performance consistency<ul><li><a target="_blank" rel="noopener noreferrer" href="https://www.waters.com/waters/global/BioResolve-SEC-mAb-Consumables-%7C-SEC-Guards/nav.htm"><strong>Explore BioResolve mAb SEC Guards and Columns</strong></a></li></ul></li></ul><h5><strong>ACQUITY UPLC Protein BEH SEC Guards and Columns</strong></h5><ul><li>Sub-2-μm particle columns for UPLC separations (2.5 μm for 450 Å)</li><li>Pore size options include: 125 Å, 200 Å, and 450 Å</li><li>Available SEC Guard Columns to extend analytical SEC Column life</li><li>Specifically designed and QC tested with BEH125, BEH200, or BEH450 protein standards to help ensure batch-to-batch consistency</li><li>10x faster than traditional HPLC-based SEC<ul><li><a target="_blank" rel="noopener noreferrer" href="https://www.waters.com/nextgen/us/en/products/columns/acquity-uplc-columns.html"><strong>Explore ACQUITY UPLC Protein BEH SEC Guards and Columns</strong></a></li></ul></li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_Acquity_UPLC_kolony_1dc5c25d3e/Waters-Acquity-UPLC-kolony.jpg" alt="Waters: Acquity UPLC columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_Acquity_UPLC_kolony_1dc5c25d3e/thumbnail_Waters-Acquity-UPLC-kolony.jpg 245w," sizes="100vw" width="807" height="407"></p><h5><strong>XBridge Protein BEH SEC Columns</strong></h5><ul><li>2.5 μm particle columns for use on any UPLC, UHPLC, or HPLC system</li><li>Pore size options include: 125 Å, 200 Å, and 450 Å</li><li>Available SEC Guard Columns to extend analytical SEC Column life</li><li>Specifically designed and QC tested with BEH125, BEH200, or BEH450 protein standards to help ensure batch-to-batch consistency<ul><li><a target="_blank" rel="noopener noreferrer" href="https://www.waters.com/waters/global/XBridge-BEH-Columns-for-High-pH-Chromatography/nav.htm"><strong>Explore XBridge Protein BEH SEC Columns</strong></a></li></ul></li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_X_Bridge_Columns_b0b55de501/Waters-XBridge-Columns.jpg" alt="Waters: XBridge Columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_X_Bridge_Columns_b0b55de501/thumbnail_Waters-XBridge-Columns.jpg 203w," sizes="100vw" width="900" height="691"></p><h4><strong>Peptide SEC Columns</strong></h4><h5><strong>BioSuite SEC Columns</strong></h5><ul><li>Silica-based diol SEC columns</li><li>Molecular weight exclusion limits are determined primarily by the selected pore size</li><li>Available in analytical and semi-preparative column sizes<ul><li><a target="_blank" rel="noopener noreferrer" href="https://www.waters.com/waters/global/BioSuite-Columns/nav.htm"><strong>Explore BioSuite SEC Columns</strong></a></li></ul></li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_Bio_Suite_Columns_bf2bb8249f.jpg" alt="Waters: BioSuite Columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_Bio_Suite_Columns_bf2bb8249f.jpg 184w," sizes="100vw" width="307" height="260"></p><h5><strong>Protein-Pak SEC Columns</strong></h5><ul><li>Based on a 10 μm diol-bonded silica</li><li>Resolve proteins that differ in molecular weight by a factor of two</li><li>Distinguish proteins differing by as little as 15% in molecular weight<ul><li><a target="_blank" rel="noopener noreferrer" href="https://www.waters.com/waters/global/Protein-Pak-HPLC-and-UPLC-Columns/nav.htm"><strong>Explore Protein-Pak SEC Columns</strong></a></li></ul></li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_Protein_Pak_Columns_be6a669326.jpg" alt="Waters: Protein-Pak Columns" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_Protein_Pak_Columns_be6a669326.jpg 245w," sizes="100vw" width="500" height="315"></p><h4><strong>Choose the right SEC Column for your lab</strong></h4><p>SEC is ideal for aggregate and fragment analysis in the research, development, and manufacturing of biotherapeutic peptides, proteins, and viral vectors, but choosing the right column for your analysis is important. Use the following criteria to choose a column that provides reliable, high quality SEC analyses of various biomolecules, including insulin, monoclonal antibodies, and adeno associated viruses (AAVs).</p><h5><strong>What to consider when choosing an SEC Column:</strong></h5><ul><li>What is the molecular weight of your sample?</li><li>What is the dispersion of your LC system?</li><li>Are you separating components &lt;2 fold difference in molecular weight (MW)?</li><li>Are you separating components &gt;2 fold difference in MW?</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_Choose_the_right_Size_exclusion_chromatography_SEC_column_for_your_analysis_with_Waters_SEC_columns_selection_guide_b81f674f65.jpg" alt="Waters: Choose the right Size-exclusion chromatography (SEC) column for your analysis with Waters SEC columns selection guide." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_Choose_the_right_Size_exclusion_chromatography_SEC_column_for_your_analysis_with_Waters_SEC_columns_selection_guide_b81f674f65.jpg 158w," sizes="100vw" width="1024" height="1013"></p><h4><strong>Addressing the complexity of SEC Separations</strong></h4><p>Experience the advancements in SEC-based technologies to address non-desired specific ionic and hydrophobic interactions for more reliable results with ACQUITY Premier Protein SEC and XBridge Premier Protein SEC Columns and Guards.</p><h5><strong>With MaxPeak Premier SEC Columns, you can:</strong></h5><ul><li>Reproducibly resolve injected sample components that are less than 2x different in size for challenging applications</li><li>Use a ‘platform SEC method’ to reduce method development time and cost</li><li>Ensure batch-to-batch and column-to-column performance</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_Classes_of_therapeutic_proteins_separated_on_an_ACQUITY_Premier_Protein_SEC_Column_d3f74a8ea4.jpg" alt="Waters: Classes of therapeutic proteins separated on an ACQUITY Premier Protein SEC Column." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_Classes_of_therapeutic_proteins_separated_on_an_ACQUITY_Premier_Protein_SEC_Column_d3f74a8ea4.jpg 234w," sizes="100vw" width="1024" height="682"></p>

Products from category GPC/SEC HPLC columns - page 2

Related content

New blood biomarkers reveal how faithfully diabetes patients take metformin

Steroidal hormones and neurosteroids – novel therapeutic strategies in bacterial infections

EU Regulation 396/2005: Pesticide Residue Testing and the Critical Role of QuEChERS Evaporation in Food Safety