<h3><strong>How long does it actually take to install all the capillaries and fittings on a conventional HPLC system?</strong></h3><h4><strong>The Small Components That Matter Most</strong></h4><p>When people think about HPLC systems, they often focus on pumps, detectors, columns, or software. Capillaries and fittings are usually seen as minor components because they are relatively inexpensive and physically small. However, every chromatographer eventually discovers that these tiny parts can have a major influence on system performance.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Connecting_a_U_HPLC_system_can_be_difficult_at_some_poorly_accessible_locations_3b837b441b.webp" alt="KNAUER: Connecting a (U)HPLC system can be difficult at some poorly accessible locations" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Connecting_a_U_HPLC_system_can_be_difficult_at_some_poorly_accessible_locations_3b837b441b.webp 208w," sizes="100vw" width="720" height="540"></p><p>Even decades ago, chromatographers recognized the importance of proper connections. In the 1980s, long before UHPLC became common, John Dolan wrote about minimizing dead volume through correct fitting installation. Today, with UHPLC systems operating at extremely high pressures and using columns with very small particle sizes, dead volume is even less tolerable than before. The topic remains just as relevant today as it was back then.</p><p>Interestingly, despite what many users assume, the chromatographic column itself is often not the primary source of HPLC or UHPLC problems. In my experience, poor connections are far more commonly responsible for issues such as peak broadening, leaks, or loss of efficiency.</p><h4><strong>The Early Days of HPLC Capillaries</strong></h4><p>Anyone who has been working with HPLC for many years will probably remember the era of rigid <strong>1/16" stainless steel tubing</strong>. Whenever PEEK tubing was unsuitable, stainless steel capillaries were the standard choice.</p><p>Setting up a system back then was far from convenient. You first had to locate an appropriate length of tubing somewhere in a drawer full of capillaries. Usually, this meant finding a several-meter-long piece and cutting it yourself using a dedicated capillary cutter. After cutting, you needed to ensure the tubing end was smooth and undamaged, hoping that the previous person using the cutter had not accidentally crushed the inner diameter.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Standard_1_16_Capillary_and_needed_tools_and_the_drawer_we_all_know_pretty_well_943d7ed0b2.jpg" alt="KNAUER: Standard 1/16” Capillary and needed tools and the drawer we all know pretty well" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Standard_1_16_Capillary_and_needed_tools_and_the_drawer_we_all_know_pretty_well_943d7ed0b2.jpg 245w," sizes="100vw" width="1277" height="456"></p><p>Once cut, the tubing often required additional preparation. You might need to deburr the capillary using a grater, shape it carefully with bending tools, and then finally install it using separate fittings and ferrules. And of course, everyone remembers the frustration of dropping a ferrule onto the laboratory floor, where it effectively disappeared forever.</p><p>At the same time, laboratories often accumulated drawers filled with pre-assembled capillaries that had fixed fittings attached. Reusing these assemblies was risky. If the fitting geometry did not perfectly match the receiving port, users could unintentionally introduce dead volume into the system. The result was often degraded chromatographic performance, broad peaks, and frustrating troubleshooting sessions involving the entire laboratory team. In worse cases, excessive force could damage threads or receiving ports while attempting to stop leaks.</p><p>During that period, assembling and connecting a complete HPLC system could easily consume half a day of work.</p><h4><strong>The Improvement: Flexible and Pre-Cut Capillaries</strong></h4><p>Later, laboratories gradually adopted pre-cut tubing and flexible capillaries, which represented a significant improvement over manually preparing stainless steel tubing.</p><p>With these newer capillaries, users simply selected the correct length and installed the tubing directly. Flexible capillaries adapted naturally to the required shape, eliminating much of the manual bending and shaping work. Installation became faster, easier, and far less stressful.</p><p>Still, these systems had limitations. Although the capillary itself improved, the fitting technology remained largely unchanged. Many of these capillaries were still effectively single-use components. If a connection was installed incorrectly because the tubing was not fully inserted into the receiving port before tightening, the result was often another unusable capillary destined for the growing “capillary drawer.” Sustainability was certainly not a strong point of these systems.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_A_typical_capillary_drawer_It_was_tricky_to_open_and_close_it_sometimes_530dd2087c.webp" alt="KNAUER: A typical capillary drawer. It was tricky to open and close it sometimes" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_A_typical_capillary_drawer_It_was_tricky_to_open_and_close_it_sometimes_530dd2087c.webp 208w," sizes="100vw" width="1024" height="768"></p><p>Even with these advancements, system setup still required considerable time and effort.</p><h4><strong>The Real Breakthrough: Modern Tool-Free Connection Systems</strong></h4><p>A major breakthrough finally arrived when manufacturers introduced a completely redesigned fitting and capillary concept aimed specifically at simplifying UHPLC connections.</p><p>These newer systems came with fittings pre-installed directly on the capillary. Unlike traditional ferrule-based systems, the fittings automatically adjusted to different port depths and sealed directly at the bottom of the port. This dramatically reduced the amount of torque required and eliminated the need for complicated installation techniques.</p><p>Perhaps the biggest advantage was convenience. These capillaries could be connected and disconnected more than 100 times without tools, while remaining entirely finger-tight. And best of all, ferrules no longer disappeared onto the laboratory floor.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_The_little_things_that_do_the_click_3a0469d516.jpg" alt="KNAUER: The little things that do the “click”" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_The_little_things_that_do_the_click_3a0469d516.jpg 245w," sizes="100vw" width="1866" height="1022"></p><p>The system I currently use includes an especially useful feature: a patented torque-limiting mechanism that prevents both under-tightening and over-tightening. Once the correct torque is reached, the fitting produces a tactile “<strong>click</strong>,” providing immediate feedback that the connection is secure and properly installed every time.</p><h4><strong>From Half a Day to Fifteen Minutes</strong></h4><p>Thanks to these modern connection systems and pre-configured startup kits, installing an HPLC or UHPLC system today is dramatically faster than it used to be.</p><p>What once consumed hours of work can now be completed in less than 15 minutes. The improvements in usability, reproducibility, and sustainability over recent years have been remarkable.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Trouble_free_connection_systom_for_HPLC_and_UHPLC_e62b80154b.webp" alt="KNAUER: Trouble-free connection systom for HPLC and UHPLC" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Trouble_free_connection_systom_for_HPLC_and_UHPLC_e62b80154b.webp 221w," sizes="100vw" width="690" height="487"></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Trouble_free_connection_systom_for_HPLC_and_UHPLC_2_71c24acdf5.webp" alt="KNAUER: Trouble-free connection systom for HPLC and UHPLC" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Trouble_free_connection_systom_for_HPLC_and_UHPLC_2_71c24acdf5.webp 224w," sizes="100vw" width="1920" height="1339"></p><p>And while today’s solutions already represent a huge leap forward, the evolution of HPLC connection technology is certainly not over yet. Looking ahead, it will be exciting to see how future innovations continue to simplify chromatography workflows even further.</p><blockquote><p>If you want to learn more about KNAUER´s capillaries, fittings and (U)HPLC system start-up kits and are interested in details and numbers, I highly recommend our brand <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/r75ev6rjivdbid246k60zrs3gjpvwdi5b8em_fad0f92fd9.pdf"><strong>new tech note "Benefits of KNAUER´s trouble-free analytical capillaries in terms of HPLC and UHPLC system performance</strong></a><strong>"</strong> and a visit to our <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/2402"><strong>products online</strong></a>.</p></blockquote>

Let´s Connect a whole (U)HPLC system without tools and trouble

News from LabRulezLCMS Library - Week 21, 2026

<p><strong>If you’ve reviewed your laboratory’s operational budget recently, you have likely noticed a troubling trend: the cost of keeping your instruments running is climbing, and nitrogen gas is a major culprit.</strong></p><p>According to Organomation’s newly released <a target="_blank" rel="noopener noreferrer" href="https://explore.organomation.com/nitrogen-usage-survey-2025-download"><strong>Nitrogen Usage 2025 Survey Report</strong></a>, you are not alone in this frustration. In fact, <strong>35% </strong>of laboratories ranked high costs as their number one frustration with their current nitrogen supply — overshadowing safety, logistics, and maintenance concerns.</p><p>With<strong> 96%</strong> of labs expecting their nitrogen demand to increase or remain steady over the next three years, waiting for prices to drop isn’t a viable strategy. To protect your budget, you need to understand why prices are surging and, more importantly, how to insulate your lab from the volatility.</p><h3><strong>The "Perfect Storm" Driving Prices Up</strong></h3><p>As a chemist, you know that nitrogen is abundant in the atmosphere. However, the industrial process of separating, purifying, compressing, and transporting it is energy-intensive and tied heavily to global markets. Three key factors are driving the 2025 price surge:</p><h4><strong>1. Rising Energy Costs</strong></h4><p>While nitrogen itself is free, the energy required to produce high-purity nitrogen gas (via fractional distillation) is not. Industrial gas manufacturing is heavily reliant on energy prices. In 2025, U.S. natural gas prices for industrial sectors have seen significant volatility, with some forecasts showing double-digit percentage increases for power plants due to export demands and tightening domestic supply. When the cost of energy rises,<a target="_blank" rel="noopener noreferrer" href="https://www.reuters.com/markets/commodities/energy/high-rising-natural-gas-costs-may-spur-fresh-climb-us-coal-use-2025-12-03/"><strong> gas suppliers pass those costs directly to the consumer</strong></a>.</p><h4><strong>2. The Logistics Premium</strong></h4><p>If you rely on high-pressure cylinders or liquid dewars, you aren't just paying for gas; you are paying for diesel, driver wages, and truck maintenance. Logistics frustrations were a top complaint in our 2025 survey, particularly for labs using liquid dewars.</p><ul><li><strong>Delivery Fees &amp; Surcharges: </strong>Fuel surcharges are now a standard line item on many invoices, fluctuating weekly with the oil market.</li><li><strong>Cylinder Rental: </strong>The "rent" for holding steel cylinders often creeps up annually, regardless of how much gas you actually consume.</li></ul><h4><strong>3. Hidden Waste (The "Boil-Off" Tax)</strong></h4><p>For labs using liquid nitrogen dewars, the "price per liter" is deceptive. Liquid nitrogen constantly boils off to maintain its temperature. If your lab uses dewars for gaseous applications (like evaporation), you are paying for gas that vanishes into the room before it ever reaches your instrument. Our survey found that while dewars nominally cost <strong>$2.06/liter</strong>, the <i>effective </i>cost is often higher due to this inevitable waste.</p><h3><strong>The Data: Cylinders vs. Generators</strong></h3><p>The most striking finding from our 2025 Survey Report was the massive price disparity between supply methods. When we analyzed the average cost per liter across <strong>78 laboratories</strong>, the data was clear:</p><h5><strong>Nitrogen Source</strong>: <strong>Average Cost Per Liter</strong></h5><ul><li><strong>Gas Cylinders</strong>: $2.79</li><li><strong>Liquid Dewars</strong>: $2.06</li><li><strong>Lab-Scale Generator</strong>: $0.70</li></ul><p>Laboratories relying on cylinders are paying nearly<strong> 400% more</strong> per liter than those generating their own gas. Over the course of a year, this difference can amount to thousands of dollars in operational waste.</p><h3><strong>How to Reduce the Price Tag: A Two-Step Strategy</strong></h3><p>You cannot control the global energy market or supply chain logistics. However, you can control how you source and use your nitrogen.</p><h4><strong>Step 1: Cut the Cord (Switch to Generation)</strong></h4><p>The single most effective way to lower your nitrogen spend is to stop buying it in tanks. While the upfront cost of equipment can sometimes be a hurdle for capital budgets, new financial models are making this transition accessible for labs of all sizes.</p><h5><strong>Why Generation Wins on Cost</strong></h5><p>A nitrogen generator, like the Organomation NITRO-GEN, separates nitrogen from your lab's existing compressed air supply using a hollow-fiber membrane. Once installed, your "cost per liter" drops to essentially zero—you are only paying for the electricity to run the compressor.</p><ul><li><strong>Rapid ROI: </strong>Most labs see a return on investment in 12 to 18 months by<a target="_blank" rel="noopener noreferrer" href="https://www.organomation.com/how-much-could-i-save-switching-to-a-nitrogen-generator"><strong> generating nitrogen</strong></a>. After this break-even point, your nitrogen supply becomes a fixed asset rather than a monthly liability.</li><li><strong>Operational Freedom: </strong>Weighing under 20 lbs and wall-mountable, the NITRO-GEN <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/1902"><strong>N2 generator</strong></a><strong> </strong>produces up to 20 L/min of gas, sufficient to support blowdown evaporators with up to 48 sample positions.</li></ul><h5><strong>Overcoming the "Sticker Shock" with Lease-to-Own</strong></h5><p>Historically, the barrier to entry for nitrogen generators has been the initial purchase price. To solve this, Organomation has introduced a Lease-to-Own program designed to align equipment costs with your operating budget rather than your capital reserves.</p><p>This program transforms a large capital expenditure into a manageable monthly operating expense. Unlike standard rental agreements where payments are lost forever, this program allows you to build equity.</p><ul><li><strong>Immediate Savings: </strong>You can install the unit and stop paying cylinder rental fees immediately, often letting the operational savings offset the lease payments.</li><li><strong>Path to Ownership: </strong>At the end of the lease term, you own the equipment outright—often for a nominal final payment (as low as $1).</li><li><strong>Preserve Capital:</strong> By spreading the cost over time, you keep your cash reserves available for other critical research needs or staffing.</li></ul><p>By leveraging a lease-to-own model, you can "cut the cord" on gas contracts today without waiting for next year’s capital budget approval.</p><h4><strong>Step 2: Optimize Your Usage (Stop Wasting Gas)</strong></h4><p>Even with a cheap supply, wasting gas is bad science and bad business. especially if you use nitrogen for sample concentration (blowdown evaporation).</p><ul><li><strong>Use Individual Flow Control:</strong> Many basic evaporators blow gas into every position, regardless of whether a sample is present. High-quality units (like the<a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products?category=3&amp;manufacturerItems=540&amp;search=N-EVAP"><strong> N-EVAP</strong></a>) feature individual needle valves for each sample position. Rule of thumb: If you are running 10 samples in a 24-position unit, ensure the other 14 needles are closed.</li><li><strong>Check for Leaks:</strong> It sounds basic, but a loose fitting on a regulator can waste cylinders of gas over a weekend. A simple "snoop test" (soapy water) on your connections every quarter is a zero-cost maintenance habit that saves money.</li><li><strong>Optimize Bath Temperature: </strong>In nitrogen blowdown evaporation, gas flow and temperature work together. If your water bath is too cool, you have to blow gas for longer to <a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/optimum-temperature-for-nitrogen-evaporation-instruments"><strong>achieve dryness</strong></a>. Ensuring your bath is at the optimal temperature for your solvent (e.g., 35-40°C for DCM) reduces the total time the gas needs to run.</li></ul><h3><strong>Conclusion</strong></h3><p>The era of "cheap" delivered gas is likely behind us. As the 2025 survey data shows, labs sticking to the status quo of cylinders and dewars are facing rising costs and logistical headaches. By transitioning to on-demand generation and optimizing your evaporation workflows, you can insulate your lab from market volatility and keep your budget focused on research, not utility bills.</p><blockquote><p><strong>Want to see the full data?</strong><br>Download the<a target="_blank" rel="noopener noreferrer" href="https://explore.organomation.com/nitrogen-usage-survey-2025-download"><strong> Laboratory Nitrogen Usage Report </strong></a>to benchmark your lab’s spending against industry peers.</p><p><strong>Curious about your potential savings?</strong><br>Try our <a target="_blank" rel="noopener noreferrer" href="https://www.organomation.com/how-much-could-i-save-switching-to-a-nitrogen-generator"><strong>Nitrogen Generator Savings Calculator </strong></a>to see exactly how much you could save by making the switch.</p></blockquote>

Why Nitrogen Is Costing Labs More Than Ever — And How to Reduce the High Price Tag

Article

Product

Application

Laboratories

Poster

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Organomation, founded in 1959, designs and manufactures high-quality nitrogen evaporators and extraction systems. Known for innovation and durability, their lab instruments are used globally for efficient sample preparation with strong customer support.

Organomation

Based in Berlin, KNAUER is a medium-sized, owner-managed company that has been serving the sciences since 1962. We develop and manufacture scientific instruments of superior quality for liquid chromatography, including: Analytical HPLC/UHPLC, Preparative HPLC, Fast protein liquid chromatography (FPLC), Multi-column chromatography/Simulated moving bed (SMB) chromatography. High pressure dosing, in-line detection systems, and osmometry are additional business areas.

KNAUER

Identification of the proteins (Bioanalytic)

We perform proteomic analyses on a state-of-the-art high-resolution ZenoTOF 7600 (SCIEX), in which the Zeno ion trap and EAD (Electron-Activated Dissociation) technology together make a powerful combination.

<p><strong>Protein identification is based on experimental measurement of peptide molecular weights and matching the amino acid sequence of the protein under study with protein sequences deposited in libraries (databases). Two approaches are most commonly used in proteomic studies: top-down and bottom-up. The top-down method involves analyzing full protein sequences. Bottom-up analyses, on the other hand, use digestion of proteins with proteolytic enzymes. The peptides obtained by digestion are analyzed using a mass spectrometer. Each analysis leads to a comparison of experimental data with data obtained by theoretical digestion of proteins described in the database.</strong></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Bioanalytic_Identification_of_the_proteins_Bioanalytic_2_6231b73f0d.jpg" alt="Bioanalytic: Identification of the proteins." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Bioanalytic_Identification_of_the_proteins_Bioanalytic_2_6231b73f0d.jpg 245w," sizes="100vw" width="1536" height="766"></p><h4><strong>LC-MS/MS</strong></h4><p>Tandem mass spectrometers are commonly used to determine protein sequences. They allow ion selection of pseudomolecular peptides and then fragmentation and measurement of the masses of the resulting fragments. Fragmentation using <i>collision induced dissociation</i>(CID ) is an invaluable tool in targeted and untargeted MS/MS analysis of small molecules. It is important to note that in proteomic analysis, data obtained using the aforementioned fragmentation method may leave gaps. For example, spectra obtained by CID fragmentation do not allow unambiguous differentiation of some amino acids: leucine from isoleucine (identical molar masses and CID fragmentation) and lysine from glutamine (very similar masses). For this reason, we perform proteomic analyses on a state-of-the-art high-resolution <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?manufacturerItems=52&amp;search=+ZenoTOF+7600"><strong>ZenoTOF 7600</strong></a> (SCIEX), in which the Zeno ion trap and EAD (<i>Electron-Activated Dissociation</i>) technology together make a powerful combination. It enables the creation of unique fragments to differentiate problematic amino acids and increase the sensitivity and specificity of the analysis.</p><blockquote><p><span style="font-size:22px;"><strong>We perform analyses of:</strong></span></p><ul><li>samples from solution;</li><li>samples from a gel;</li><li>samples from a complex matrix (by prior arrangement);</li><li>samples from lyophilizer;</li><li>samples previously prepared by the client.</li></ul><p>Qualitative analysis of proteins includes:</p><ul><li>To confirm the presence of a protein, the sample is subjected to digestion and the result obtained from experimental data is compared with theoretical data;</li><li>Comparison of experimental data on the masses of peptides included in the analyzed protein with the protein sequences described in the database;</li><li>Analysis and identification of the protein mixture;</li><li>Identification of post translational modifications (PTMs) (we use the tools: Skyline, Spectronaut).</li><li>Reporting of the result including, but not limited to, confirmation of the coverage of the protein sequence obtained in the test sample with the theoretical protein and the list of modified peptides, location and % of modifications.</li></ul><p><span style="font-size:22px;"><strong>Comparative analyses include:</strong></span></p><ul><li>Determining the composition of mixtures;</li><li>Comparison and profiling of sample series - protein identification and trend analysis.</li></ul><p><span style="font-size:22px;"><strong>Our offer also includes</strong>:</span></p><ul><li>Support in the planning and execution of studies (the scope is determined individually);</li><li>Assistance in the development of extraction methods from complex matrices - biological fluids, plant tissue, animal tissues (the scope is determined individually);</li><li>Statistical analysis using tools: MarkerView (PCA), GraphPad Prism, Trends, Sciex OS;</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1294"><strong>Quantitative analysis of proteins</strong></a>;</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1296"><strong>Analysis and characterization of monoclonal antibodies</strong></a>.</li></ul></blockquote><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Bioanalytic_Identification_of_the_proteins_Bioanalytic_1_97cf8c94b3.jpg" alt="Bioanalytic: Identification of the proteins." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Bioanalytic_Identification_of_the_proteins_Bioanalytic_1_97cf8c94b3.jpg 117w," sizes="100vw" width="1500" height="2000"></p>

Bioanalytic Development of LC-MS/MS method

We take an individual and factual approach to developing a new method and performing analyses.

<h4><strong>An experienced partner in the LC-MS/MS analysis industry</strong></h4><p>If you are interested in performing quantitative, qualitative or mixed analysis using LC-MS/MS analytical methods but lack such capabilities due to lack of equipment, “know-how” or are looking for a team to perform analysis for a project - you have come to the right place. We work on <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/companies/315"><strong>equipment</strong></a> with high sensitivity, speed and specificity. Our team is a group of specialists with comprehensive experience in the industry. The LabExperts <a target="_blank" rel="noopener noreferrer" href="https://labexperts.com.pl/zespol/">team</a> has participated in many scientific projects, R&amp;D and commercial implementations. We take an individual and factual approach to developing a new method and performing analyses:</p><ul><li>In the first stage, we get to know your requirements - to align expectations with capabilities;</li><li>Next, we will form and approve the framework for cooperation, ensuring the observance of confidentiality by signing a non-disclosure agreement (NDA);</li><li>We will plan together and, for our part, meet the deadlines for the completion of the set tasks;</li><li>We will perform preliminary studies, after which we will decide together whether and to what extent we continue to develop the methods;</li><li>We will handle the development of the sample preparation procedure;</li><li>We will select the best parameters for the LC-MS/MS analytical method;</li><li>The analytical method along with the sample preparation procedure will be validated according to generally accepted guidelines and standards, or we will establish the required acceptance criteria and ranges for your needs;</li><li>We will perform LC-MS/MS analyses of a series of samples;</li><li>We will provide results in the form of easy-to-read reports at each required stage;</li><li>We will evaluate the feasibility and assist in the transfer of the method to your laboratory.</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Bioanalytic_Bioanalytic_Development_of_LC_MS_MS_method_2594c9fd54.jpg" alt="Bioanalytic: Bioanalytic Development of LC-MS-MS method." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Bioanalytic_Bioanalytic_Development_of_LC_MS_MS_method_2594c9fd54.jpg 234w," sizes="100vw" width="1536" height="1024"></p><p>Pricing and the framework for cooperation are always determined individually depending on the scope of the study. This is influenced by the amount of work and the complexity of the development of the sample preparation procedure and analytical method and routine analytics. As a rule, the final price consists of three separately priced elements: the cost of preliminary studies, method validation, and the cost of analysis of one sample within a series of analyses.</p><p>Don't beat your head against the wall - we will help you achieve your goal!</p><p>We look forward to working with you!</p>

Bioanalytic Individual LC-MS/MS training

We are ready to prepare customized LC-MS/MS training for the needs of participants.

<h4><strong>BASIC INFORMATION</strong></h4><ul><li>TITLE: <strong>Customized LC-MS/MS Training</strong></li><li>CATEGORY: <strong>LC-MS/MS training</strong></li><li>LOCATION: <strong>Lodz, PL</strong> or other</li><li>TRAINING TIME: <strong>1-5 days</strong> or more</li><li>NUMBER OF PARTICIPANTS: <strong>4-8 people</strong></li><li>EQUIPMENT:<strong> SCIEX QTRAP/QTOF LC-MS/MS</strong></li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Bioanalytic_Bioanalytic_Individual_LC_MS_MS_training_8a73408c56.jpg" alt="Bioanalytic: Bioanalytic Individual LC-MS-MS training." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Bioanalytic_Bioanalytic_Individual_LC_MS_MS_training_8a73408c56.jpg 245w," sizes="100vw" width="1536" height="930"></p><h4><strong>TRAINING DESCRIPTION</strong></h4><p>Customized LC-MS/MS training we are ready to prepare for the needs of participants, discussing:</p><ul><li>theoretical basics of chromatography, mass spectrometry,</li><li>practical operation of the LC-MS/MS system,</li><li>qualitative and quantitative analysis,</li><li>DDA &amp; DIA screening methods,</li><li>“omics” analyses,</li><li>validation of analytical methods,</li><li>solving basic methodological and technical problems,</li><li>software,</li><li>calibration,</li><li>“tips&amp;tricks”,</li><li>etc...</li></ul><p>We offer training for both novices starting the fascinating adventure of LC-MS/MS analytics, as well as for those who are LC-MS/MS users and are interested in expanding and consolidating their knowledge.</p><h4><strong>Framework training program</strong></h4><ul><li>individual LC-MS/MS training is developed according to the customer's demand</li><li>conducting theoretical and/or practical training at the customer's workplace</li><li>carrying out theoretical and/or practical training in a laboratory in Lodz</li></ul>

Bioanalytic Basic LC-MS/MS training

Basic LC-MS/MS training covers the theoretical basics of mass spectrometry and familiarization with the basic operation of the instrument.

<h4><strong>BASIC INFORMATION</strong></h4><ul><li>TITLE: <strong>Basic LC-MS/MS training</strong></li><li>CATEGORY: <strong>LC-MS/MS training</strong></li><li>LOCATION: <strong>Lodz, PL</strong></li><li>TRAINING TIME: <strong>3 days</strong></li><li>NUMBER OF PARTICIPANTS: <strong>up to 5 people</strong></li><li>EQUIPMENT:<strong> SCIEX QTRAP </strong><span class="ts-pf-details-content"><strong>&amp; </strong></span><strong>QTOF LC-MS/MS</strong></li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Bioanalytic_Bioanalytic_Basic_LC_MS_MS_training_fb1382a55b.jpg" alt="Bioanalytic: Bioanalytic Basic LC-MS-MS training." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Bioanalytic_Bioanalytic_Basic_LC_MS_MS_training_fb1382a55b.jpg 205w," sizes="100vw" width="1293" height="987"></p><h4><strong>TRAINING DESCRIPTION</strong></h4><p>Basic LC-MS/MS training covers the theoretical basics of mass spectrometry and familiarization with the basic operation of the instrument. Basic LC-MS/MS training is primarily aimed at those who are new to LC-MS/MS equipment or who wish to become familiar with this analytical technique. During the training, the following will be presented:</p><ul><li>principles of developing and optimizing quantitative and qualitative methods on low (triple quadrupole, QTRAP) and high resolution (QTOF) instruments,</li><li>basic functionality of the software,</li><li>procedures and objectives of instrument calibration,</li><li>principles of maintaining the cleanliness of mass spectrometer operation.</li></ul><h5><strong>Basic LC-MS/MS training - the program</strong></h5><p><span style="font-size:20px;"><strong>Day I</strong></span></p><p><strong>Theoretical classes:</strong></p><ul><li>Introduction to LC</li><li>Introduction to mass spectrometry (basics)</li><li>Quantitative analysis.</li></ul><p><strong>Practical part:</strong></p><p>QTRAP:</p><ul><li>QTRAP scanning modes on the instrument - Q1, , MS2, MRM, demonstration and discussion on the example of a selected pesticide of the fragmentation spectrum and its fragmentation pathway.</li><li>MRM pair formation (manual, semi-automatic, automatic).</li><li>optimization of ion source parameters -T-conector</li><li>explanation of the main parameters related to LC (column selection, gradient vs isocrat, autosampler)</li><li>LC-MS/MS method setup and optimization</li></ul><p>QTOF:</p><ul><li>manual and automatic optimization of MRM<sup>HR</sup></li><li>ion source and LC parameters (transfer from method developed above)</li></ul><p>Sequence of quantitative analysis on both instruments.</p><p><span style="font-size:20px;"><strong>Day II</strong></span></p><p><strong>Quantitative analysis:</strong></p><ul><li>data processing and analysis,</li><li>reporting - Sciex OS (QTRAP, QTOF).</li><li>Discussion of types of integration algorithms (MQ4, autopeak) and integration parameters.</li><li>independent selection of integration parameters and plotting of master curves.</li><li>independent data analysis and generation of analysis report.</li></ul><p><strong>Qualitative analysis:</strong></p><ul><li>Theoretical introduction - introduction to qualitative analysis:</li><li>qwadrupole modes (Prec/NL),</li><li>trap modes (EMS, EPI, MS3),</li><li>QTOF modes (TOF MS, TOF MS/MS).</li><li>mixed methods,</li><li>targeted vs. untargeted analysis,</li><li>DDA (IDA) - discussion of method development,</li></ul><p><strong>Practical part:</strong></p><ul><li>creation of qualitative methods on QTRAP (Prec-IDA, MRM-IDA), other parameters (LC, ion source) as the previous day,</li><li>LightSight - discussion of operation, creation of MRM-IDA multimethod for selected pesticide and analysis of samples (night).</li><li>QTOF - creation of IDA method, other parameters (LC, ion source) as the previous day.</li></ul><p>Sequence of qualitative analysis overnight.</p><p><span style="font-size:20px;"><strong>Day III</strong></span></p><p><strong>Qualitative data analysis:</strong></p><p>QTRAP:</p><ul><li>Discussion of Prec-IDA, MRM-IDA results - what we see in different types of MS and MS/MS scans. Manual review of data and via IDA Explorer (SciexOS).</li><li>Analysis of results in LightSight, comparison with Prec-IDA, for example - advantages/disadvantages</li></ul><p>QTOF:</p><ul><li>search for potentially present compounds in the sample,</li><li>manual comparison of blank vs. test sample,</li><li>manual by XIC extraction (by sum formula),</li><li>Formula finder - derivation of sum formula on TOF MS data and verification of fragmentation on TOF MS/MS data</li><li>search in IDA Explorer mode - application of filters: similarity, isotopic distribution, mass defect,</li><li>database searching,</li><li>Molecule Profiler - demonstration of software capabilities on selected pesticide example,</li></ul><p><strong>Instrument calibration:</strong></p><ul><li>resolution, mass-to-charge ratio, intensity,</li><li>Q1 and Q3, LIT (MS and MS/MS), TOF MS and TOF-MS/MS</li><li>Automation vs. manual calibration,</li></ul><p><strong>LC-MS/MS application examples</strong></p><p><strong>Summary</strong></p><p><strong>Discussion</strong></p>

Bioanalytic Quantitative LC-MS/MS analysis training

The goal of the training is to introduce users to the procedures and capabilities of the LC-MS/MS system and software to achieve sensitivity, selectivity, precision and reproducibility in quantitative analysis.

<h4><strong>BASIC INFORMATION</strong></h4><ul><li>TITLE: <strong>Quantitative LC-MS/MS analysis training</strong></li><li>CATEGORY: <strong>LC-MS/MS training</strong></li><li>LOCATION: <strong>Lodz, PL</strong></li><li>TRAINING TIME: <strong>3 days</strong></li><li>NUMBER OF PARTICIPANTS: <strong>up to 5 people</strong></li><li>EQUIPMENT:<strong> SCIEX QTRAP LC-MS/MS</strong></li></ul><figure class="image"><img style="aspect-ratio:1200/675;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Bioanalytic_Bioanalytic_Quantitative_LC_MS_MS_analysis_training_d13b5d8127.jpg" alt="Bioanalytic: Bioanalytic Quantitative LC-MS-MS analysis training." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Bioanalytic_Bioanalytic_Quantitative_LC_MS_MS_analysis_training_d13b5d8127.jpg 245w," sizes="100vw" width="1200" height="675"></figure><h4><strong>TRAINING DESCRIPTION</strong></h4><p>Quantitative LC-MS/MS analysis - the training is designed for laboratory personnel using LC-MS/MS systems for quantitative analysis. The following topics are covered during the training:</p><ul><li>Triple quadrupole spectrometer calibration</li><li>MRM pair formation and optimization</li><li>Optimization of ion source parameters</li><li>Optimization of chromatographic parameters</li><li>Sample preparation using the example of blood drawn on <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1283"><strong>Mitra®</strong></a> samplers (VAMS)</li><li>Matrix effect, internal standards (ISTD), matrix curves</li><li>Validation of the quantitative method</li><li>Reporting of results</li></ul><p>The goal of the training is to introduce users to the procedures and capabilities of the LC-MS/MS system and software to achieve sensitivity, selectivity, precision and reproducibility in quantitative analysis while covering the widest possible linear range of concentrations.</p><h3><strong>Training program</strong></h3><h4><span style="font-size:20px;"><strong>Day I</strong></span></h4><h5><strong>Theoretical part:</strong></h5><p>Triple quadrupole structure, ionization, MRM and sMRM scanning, chromatography, multimethods</p><h5><strong>Practical part:</strong></h5><ul><li>Q1/Q3 calibration (10 Da/s), MS/MS - resolution, m/z, intensity.</li><li>MRM pair formation and optimization (manual, semi-automatic, automatic).</li><li>Ion source optimization - T-concector and FIA</li><li>Gradient vs isocrat, dosing, column selection, temperature selection, other important parameters</li><li>Establishment and optimization of LC-MS/MS method.</li><li>How to take care of MS cleanliness - ionization time programming, multi-way valve, cleaning of ion source and instrument front end</li></ul><p>Sample preparation in pure solvent (standard curve, QC, solvent, solvent+ISTD, test samples), overnight analysis sequence.</p><h4><span style="font-size:20px;"><strong>Day II</strong></span></h4><h5><strong>Practical part - preparation of whole blood samples (Mitra®):</strong></h5><ul><li>Preparation of matrix standard curves</li><li>Preparation of quality control (QC) samples in three concentrations</li><li>Preparation of blank samples (without ISTD and with ISTD).</li><li>Preparation of samples for recovery determination (“pre-spiked” and “post-spiked”)</li><li>Preparation of test samples</li></ul><h5><strong>Theoretical part:</strong></h5><ul><li>Samples in the matrix - discussion of the matrix effect and ways to level it.</li><li>Optimization of sample preparation method and LC-MS/MS method</li></ul><h5><strong>Practical part:</strong></h5><ul><li>Sample extraction from Mitra® samplers for LC-MS/MS analysis.</li><li>Sequence of analysis of prepared samples overnight</li></ul><h4><span style="font-size:20px;"><strong>Day III</strong></span></h4><h5><strong>Theoretical part:</strong></h5><ul><li>Validation of the quantitative LC-MS/MS method</li></ul><h5><strong>Practical part:</strong></h5><ul><li>Software - data integration algorithms, signal smoothing, weighing.</li><li>Matrix curves vs curves in solvent, influence of ISTD (Sciex OS).</li><li>Method validation - validation criteria, determination of LOD, LLOQ, ULOQ, linearity, working range of the method, repeatability, recovery.</li><li>Preparation of summary validation reports</li><li>Reporting of results from test samples - report vs export of data to Excel.</li><li>Summary and discussion.</li></ul>

Bioanalytic QTRAP vs QTOF Quality analysis training

The training includes a presentation of the basic differences in application and a comparison of the capabilities of QTRAP and QTOF instruments in qualitative analysis.

<h4><strong>BASIC INFORMATION</strong></h4><ul><li>TITLE: <strong>QTRAP vs QTOF Quality analysis training</strong></li><li>CATEGORY: <strong>LC-MS/MS training</strong></li><li>LOCATION: <strong>Lodz, PL</strong></li><li>TRAINING TIME: <strong>3 days</strong></li><li>NUMBER OF PARTICIPANTS: <strong>up to 5 people</strong></li><li>EQUIPMENT:<strong> SCIEX QTRAP </strong><span class="ts-pf-details-content"><strong>&amp; </strong></span><strong>QTOF LC-MS/MS</strong></li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Bioanalytic_Bioanalytic_QTRAP_vs_QTOF_Quality_analysis_training_18ca66163f.jpg" alt="Bioanalytic: Bioanalytic QTRAP vs QTOF Quality analysis training." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Bioanalytic_Bioanalytic_QTRAP_vs_QTOF_Quality_analysis_training_18ca66163f.jpg 221w," sizes="100vw" width="1000" height="707"></p><h4><strong>TRAINING COURSE DESCRIPTION</strong></h4><p><strong>QTRAP vs QTOF qualitative analysis</strong> - the training is aimed at people who perform analyses related to substance identification or metabolite search in their research work. The training includes a presentation of the basic differences in application and a comparison of the capabilities of QTRAP and QTOF instruments in qualitative analysis. In addition to the theoretical session, participants will undergo a course in the development and optimization of <strong>DDA (IDA)</strong> (QTRAP &amp; QTOF) and <strong>DIA (SWATH) </strong>(QTOF) methods. Analysis and comparison of results will be conducted using <a target="_blank" rel="noopener noreferrer" href="https://sciex.com/products/software/sciex-os-software">SciexOS</a>, <a target="_blank" rel="noopener noreferrer" href="https://sciex.com/products/software/markerview-software">MarkerView</a>, <a target="_blank" rel="noopener noreferrer" href="https://sciex.com/products/software/lightsight-software">LightSight</a> and <a target="_blank" rel="noopener noreferrer" href="https://sciex.com/products/software/molecule-profiler-software">MoleculeProfiler</a> software.</p><h5><strong>Training program</strong></h5><h4><span style="font-size:20px;"><strong>Day I</strong></span></h4><h5><strong>Theoretical part</strong></h5><ul><li>Principle of operation of MS/MS systems</li><li>Differences and capabilities of QTRAP and QTOF</li><li>Comparison of typical analytical procedures and their application</li><li>DDA (IDA) vs DIA (SWATH) methodology.</li><li>Supporting software - LightSight, Molecule Profiler, ACD Labs, MarkerView</li><li>General principles of compound fragmentation</li></ul><h4><span style="font-size:20px;"><strong>Day II</strong></span></h4><p><strong>Objective - to develop methods to search for metabolites of a known substance.</strong></p><h5><strong>QTRAP</strong></h5><ul><li>Development of IDA screening methods (pMRM, Prec/NL, EMS)</li><li>Optimization of LC-MS/MS IDA method</li><li>Data acquisition</li></ul><h5><strong>QTOF</strong></h5><ul><li>Development and optimization of LC-MS/MS IDA and SWATH methods</li><li>Data acquisition</li></ul><h4><span style="font-size:20px;"><strong>Day III</strong></span></h4><p><strong>Objective - identification and profiling of metabolites of a known substance</strong></p><h5><strong>QTRAP data analysis</strong></h5><ul><li>Manual search and identification</li><li>LightSight, MarkerView</li></ul><h5><strong>QTOF data analysis</strong></h5><ul><li>Search and data analysis methods</li><li>Manual search and identification</li><li>IDA vs SWATH</li><li>Automated search and identification - SciexOS, databases</li><li>Molecule Profiler, MarkerView</li></ul><p>Summary and discussion<br>&nbsp;</p>

Bioanalytic QTOF quantitative and qualitative analysis training

The purpose of the training is to introduce users to the capabilities of the LC-HR-MS/MS (QTOF) system in quantitative and qualitative analysis.

<h4><strong>BASIC INFORMATION</strong></h4><ul><li>TITLE:&nbsp;<strong> QTOF quantitative and qualitative analysis training</strong></li><li>CATEGORY: <strong>LC-MS/MS training</strong></li><li>LOCATION: <strong>Lodz, PL</strong></li><li>TRAINING TIME: <strong>3 days</strong></li><li>NUMBER OF PARTICIPANTS: <strong>up to 5 people</strong></li><li>EQUIPMENT:<strong> SCIEX</strong><span class="ts-pf-details-content"><strong> </strong></span><strong>QTOF LC-MS/MS</strong></li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Bioanalytic_Bioanalytic_QTOF_quantitative_and_qualitative_analysis_training_af1620ae8c.jpg" alt="Bioanalytic: Bioanalytic QTOF quantitative and qualitative analysis training." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Bioanalytic_Bioanalytic_QTOF_quantitative_and_qualitative_analysis_training_af1620ae8c.jpg 221w," sizes="100vw" width="1000" height="707"></p><h4><strong>TRAINING COURSE DESCRIPTION</strong></h4><p><strong>Qualitative and quantitative analysis of QTOF</strong> - the training is designed for laboratory personnel using <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?instrumentationItems=30&amp;mainauthorItems=55"><strong>high-resolution (HR) LC-MS/MS</strong></a> systems for qualitative and quantitative analysis. The following topics are covered during the training:</p><ul><li><strong>QTOF spectrometer calibration</strong></li><li><strong>Targeted and untargeted methods</strong></li><li><strong>Quantitative analysis (TOF MS, MRMhr)</strong></li><li><strong>Qualitative and quantitative analysis - DDA (IDA) vs DIA (SWATH) methodology</strong></li><li><strong>Software and its use in high-resolution data analysis</strong></li><li><strong>Reporting of results</strong></li></ul><p>The purpose of the training is to introduce users to the capabilities of the LC-HR-MS/MS (QTOF) system in quantitative and qualitative analysis. To point out the advantages of high resolution in identifying or confirming the presence of substances in a sample and also the strengths of modern QTOF systems in parallel quantitative analysis.</p><h3><strong>Training program</strong></h3><h4><span style="font-size:20px;"><strong>Day I</strong></span></h4><h5><strong>Theoretical part</strong></h5><ul><li>The principle of operation and capabilities of the QTOF system</li><li>Comparison of typical analytical procedures and their application</li><li>Targeted and quantitative analysis (TOF MS vs MRMhr)</li><li>DDA (IDA) vs DIA (SWATH) methodology.</li><li>Supporting software - Molecule Profiler, ACD Labs, MarkerView</li><li>General principles of compound fragmentation</li></ul><h4><span style="font-size:20px;"><strong>Day II</strong></span></h4><p><strong>Objective</strong> - to develop methods for quantitative analysis, confirmation or search for metabolites of a known substance, general characterization of the sample.</p><h5><strong>Practical part:</strong></h5><ul><li>Creation and optimization of the MRMhr targeted method</li><li>Creation and optimization of a non-targeted method IDA</li><li>Creation and optimization of the non-targeted method SWATH</li><li>Data acquisition (overnight)</li></ul><h4><span style="font-size:20px;"><strong>Day III</strong></span></h4><p><strong>Objective</strong> - quantitative analysis, confirmation of the presence or identification of metabolites of a known substance, general characterization of the sample (identification of compounds present in the sample), profiling.</p><h5><strong>Practical part:</strong></h5><ul><li>Quantitative analysis - TOF MS vs MRMhr</li><li>Methods for searching and analyzing data</li><li>IDA vs SWATH data</li><li>Manual search and identification</li><li>Automated search and identification - SciexOS, databases</li><li>Molecule Profiler, MarkerView</li><li>Summary and discussion</li></ul>

Thermo Scientific Orbitrap Exploris MX Mass Detector

Accelerate biopharmaceutical late-stage development, commercialization, manufacturing, and quality control (QC) by easily and reliably obtaining compliance-ready, high-quality mass information. 

<p><strong>Accelerate biopharmaceutical late-stage development, commercialization, manufacturing, and quality control (QC) by easily and reliably obtaining compliance-ready, high-quality mass information.&nbsp;</strong></p><p>The <strong>Thermo Scientific Orbitrap Exploris MX mass detector</strong> is the perfect fit for deploying routine mass monitoring.</p><p>In addition to high-resolution mass detection provided by Thermo Scientific Orbitrap mass analyzers, this fit for purpose system is simple to operate and compliance ready with <a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/cz/en/home/industrial/chromatography/chromatography-learning-center/chromeleon-cds-information/cds-mass-spectrometry-software.html">Thermo Scientific Chromeleon chromatography data system (CDS) software</a>. Consistent performance between the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/402">Thermo Scientific Orbitrap Exploris 240 mass spectrometer</a> and Orbitrap Exploris MX detector ensures seamless method transfer from development to QC.</p><h4><strong>High-resolution accurate-mass (HRAM) data provide utmost confidence for:</strong></h4><ul><li>Sequence confirmation</li><li>Peptide monitoring</li><li>Intact protein analysis (from small to large molecules, reduced mAbs, and intact mAbs under native and denaturing conditions)</li><li>Glycan profiling</li><li>Oligonucleotide and oligonucleotide impurity mass confirmation</li></ul><h3><strong>Highlights of Orbitrap Exploris MX mass detector&nbsp;</strong></h3><div colctrl-id="5-1"><div><div container-id="cq-colctrl-lt0" comp-id="A1"><div><h4><strong>Simplicity for scientists and technicians</strong></h4><p>Simplify tasks and reduce errors for more ‘right first time’ analyses with Chromeleon CDS, with built in methods, control, data processing, and management. The suite of smart tools makes your work faster and easier, while ensuring reproducible, high-quality mass monitoring.</p></div></div></div><div><div container-id="cq-colctrl-lt0" comp-id="B1"><div><h4><strong>Accelerate productivity</strong></h4><p>High uptime boosts productivity. Rapid “set and forget” calibration procedures provide consistent mass stability for at least four weeks at prescribed conditions. Instrument status monitoring and optimized pressure control alert users when maintenance is needed, avoiding unnecessary downtime and repeat analyses.</p></div></div></div></div><div colctrl-id="6-1"><div><div container-id="cq-colctrl-lt0" comp-id="A1"><div><h4><strong>Compliance for competitive advantage</strong></h4><p>Designed for data integrity, data security, and compliance, fully scalable Chromeleon CDS provides comprehensive technical controls to give you a competitive edge in meeting global regulatory requirements.</p></div></div></div><div><div container-id="cq-colctrl-lt0" comp-id="B1"><div><h4><strong>Consistent results deliver confidence</strong></h4><p>Robust and reliable performance from system to system and site to site ensure confidence in results used to make critical decisions. Industry-proven Orbitrap technology, now purposely designed for mass monitoring in future-proof lab operations.</p></div></div></div></div><div colctrl-id="7-1"><div><div container-id="cq-colctrl-lt0" comp-id="A1"><div><h4><strong>Seamless method transfer to MAM</strong></h4><p>Easy transfer of sophisticated Multi-Attribute Method (MAM) assays from development to manufacturing bridges the gap between development and QC.</p></div></div></div><div><div container-id="cq-colctrl-lt0" comp-id="B1"><div><h4><strong>Dedicated, global support team</strong></h4><p>The dedicated, global Thermo Scientific MAM team maximizes your productivity and confidence with installation, training, and fast service and support. Standardized system performance evaluation test (SET) and installation qualification/operational qualification (IQ/OA) thoroughly assess system performance with comprehensive installation and post-maintenance acceptance criteria.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Orbitrap_Exploris_MX_Mass_Detector_4_2ad72d9b21.jpg" alt="Orbitrap Exploris MX mass stability: mass deviation relative to first observed mass in parts-per-million for 9 BSA tryptic peptides monitored over a period of 6 weeks using the new internal recalibration option. Each data point is an average of 19 individual injections." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Orbitrap_Exploris_MX_Mass_Detector_4_2ad72d9b21.jpg 184w," sizes="100vw" width="1240" height="1052"></p><h3><strong>Accelerate MAM deployment&nbsp;</strong></h3><h4><strong>Seamless knowledge and method transfer</strong></h4><p>Benefit from the end-to-end Thermo Scientific MAM 2.0 workflow approach to comprehensive characterization and monitoring of biotherapeutics from development to commercialization. <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/402">Orbitrap Exploris 240</a> mass spectrometer methods, established during development, seamlessly transfer to the Orbitrap Exploris MX detector in manufacturing or by contract partners. In addition to full integration into the high-resolution MAM 2.0 workflow, the usability and low cost of the Orbitrap Exploris MX detector make it the perfect fit for high-throughput QC and contract labs.</p><p>Users can identify and evaluate relevant product quality attributes (PQAs) via high-throughput analytics provided by Thermo Scientific BioPharma Finder software. Connected labs can access data from development through QC using MAM 2.0 powered by Thermo Scientific Ardia Platform. And, PQAs can be monitored throughout the entire drug development process using the MAM target peptide workbook built from the list of identified peptides upon incorporation into a Chromeleon processing method. The processing method along with the instrument method, injection sequence, view setting and report template can be stored into a MAM eWorkflow for easy and direct transfer to QC via Chromeleon CDS Enterprise software.</p><div><h5><strong>MAM 2.0 offers:</strong></h5><ul><li>Fast decision making based on high-confidence PQAs obtained using industry-leading HRAM Orbitrap technology</li><li>Seamless knowledge and method transfer across instruments, departments, and sites using compliance-ready, Chromeleon CDS enterprise software, and Ardia Platform</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Orbitrap_Exploris_MX_Mass_Detector_cd7474e7ed.jpg" alt="Thermo Scientific Orbitrap Exploris MX Mass Detector" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Orbitrap_Exploris_MX_Mass_Detector_cd7474e7ed.jpg 245w," sizes="100vw" width="1170" height="504"></p><blockquote><p><strong>Thermo Scientific MAM 2.0</strong></p><p>The end-to-end MAM solution for a fully connected, compliance-ready platform. MAM 2.0 includes everything you need to bring your next biotherapeutic candidate straight through to breakthrough.</p><ul><li><a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/cz/en/home/industrial/pharma-biopharma/biopharmaceutical-analytical-testing/multi-attribute-method.html"><strong>Learn more</strong></a></li></ul></blockquote></div></div></div></div></div>

Thermo Scientific Orbitrap Exploris Mass Spectrometers

Discover which Orbitrap Exploris mass spectrometry system will meet your business needs for more efficient screening, identification, confirmation and quantitation.

<p><strong>Benefit from record-setting performance. With built-in intelligence, sensitivity and selectivity; the Thermo Scientific Orbitrap Exploris mass spectrometry is quantitative high-resolution, accurate-mass (HRAM) liquid chromatography mass spectrometry (LC-MS) for analysis depth to the lowest levels with high quantitative accuracy and precision to meet your exact analytical requirements. Scale up your research and translate your results more rapidly and simply than ever before.</strong></p><h3><strong>Why choose an Orbitrap Exploris mass spectrometer for your laboratory?</strong></h3><p>Discover which Orbitrap Exploris mass spectrometry system will meet your business needs for more efficient screening (including targeted, suspected and nontargeted), identification, confirmation and quantitation.</p><h4><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1490"><strong>Orbitrap Exploris MX mass detector</strong></a></h4><p>Accelerate biopharmaceutical commercialization, manufacturing and quality control by easily and reliably obtaining compliance-ready, high-quality mass information with the Thermo Scientific Orbitrap Exploris MX Mass Detector.</p><p><strong>Typical applications: </strong>Biopharmaceutical characterization and QC, intact protein analysis, Multi-Attribute Method (MAM), oligonucleotides, pharmaceuticals</p><p><strong>Analyses: </strong>Targeted / non-targeted screening (MS), Unknown Identification (MS), Absolute and Relative Quantitation (MS)</p><p><strong>Resolution powers: </strong>180,000</p><p><strong>Mass range: </strong>m/z 40–3,000 up to m/z 8,000 with BioPharma option</p><p><strong>Scan speed: </strong>22Hz</p><p><strong>Sources &amp; Flexibility: </strong><a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/cz/en/home/industrial/mass-spectrometry/liquid-chromatography-mass-spectrometry-lc-ms/lc-ms-systems/orbitrap-lc-ms/orbitrap-exploris-mass-spectrometers.html#small">AP-SMALDI<sup>5</sup>&nbsp;AF source for MS Imaging</a></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Orbitrap_Exploris_MX_Mass_Detector_2_a84ed39672.jpg" alt="Thermo Scientific Orbitrap Exploris MX Mass Detector" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Orbitrap_Exploris_MX_Mass_Detector_2_a84ed39672.jpg 169w," sizes="100vw" width="1696" height="1575"></p><h4><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/403"><strong>Orbitrap Exploris 120 Mass Spectrometer&nbsp;</strong></a></h4><p>Benefit from best in class high-resolution accurate mass for confident testing, screening and quantification of small molecules with the Thermo Scientific Orbitrap Exploris 120 Mass Spectrometer.&nbsp;&nbsp;</p><p><strong>Typical applications: </strong>Food and environmental testing, metabolomics, forensic toxicology, clinical research, pharmaceuticals</p><p><strong>Analyses: </strong>Targeted / non-targeted screening (MS), Unknown Identification (MS), Confirmation (MS/MS), Absolute and Relative Quantitation (MS and/or MS<sup>2</sup>)</p><p><strong>Resolution powers: </strong>120,000</p><p><strong>Mass range: </strong><i>m/z</i>&nbsp;40 – 3,000</p><p><strong>Scan speed: </strong>22Hz</p><p><strong>Sources &amp; Flexibility: </strong><a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/order/catalog/product/IQLAAEGABBFAGOMZZZ">APCI/APPI Combination</a>, <a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/cz/en/home/industrial/mass-spectrometry/liquid-chromatography-mass-spectrometry-lc-ms/lc-ms-systems/orbitrap-lc-ms/orbitrap-exploris-mass-spectrometers.html#small">AP-SMALDI<sup>5</sup>&nbsp;AF source for MS Imaging</a></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Orbitrap_Exploris_120_Mass_Spectrometer_3_77e4e07555/Thermo-Orbitrap-Exploris-120-Mass-Spectrometer-3.jpg" alt="Thermo Orbitrap Exploris 120 Mass Spectrometer " srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Orbitrap_Exploris_120_Mass_Spectrometer_3_77e4e07555/thumbnail_Thermo-Orbitrap-Exploris-120-Mass-Spectrometer-3.jpg 171w," sizes="100vw" width="938" height="856"></p><h4><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/402"><strong>Orbitrap Exploris 240 Mass Spectrometer&nbsp;</strong></a></h4><p>Get unmatched confidence for discovery and identification, with application versatility and operational simplicity with the Thermo Scientific Orbitrap Exploris 240 Mass Spectrometer.&nbsp;</p><p><strong>Typical applications: </strong>Biopharmaceutical characterization, proteomics, metabolomics, lipidomics, food and environmental research, clinical research</p><p><strong>Analyses: </strong>Targeted / non-targeted screening (MS), Unknown Identification (MS), Confirmation (MS/MS), Absolute and Relative Quantitation (MS and/or MS<sup>2</sup>)</p><p><strong>Resolution powers: </strong>240,000</p><p><strong>Mass range: </strong><i>m/z</i>&nbsp;40 - 6000, (up to 8000 with BioPharma option)</p><p><strong>Scan speed: </strong>30Hz</p><p><strong>Sources &amp; Flexibility: </strong><a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/us/en/home/industrial/mass-spectrometry/liquid-chromatography-mass-spectrometry-lc-ms/lc-ms-accessories/field-asymmetric-ion-mobility-spectrometry-faims.html">FAIMS Pro Duo interface</a>, <a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/order/catalog/product/IQLAAEGABBFAGOMZZZ">APCI/APPI Combination</a>, <a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/order/catalog/product/ES081">EASY-Spray Source</a>, <a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/order/catalog/product/ES071">Nanospray Flex Ion Sources</a>&nbsp;, <a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/cz/en/home/industrial/mass-spectrometry/liquid-chromatography-mass-spectrometry-lc-ms/lc-ms-systems/orbitrap-lc-ms/orbitrap-exploris-mass-spectrometers.html#small">AP-SMALDI<sup>5</sup>&nbsp;AF source for MS Imaging</a></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Orbitrap_Exploris_240_Mass_Spectrometer_2_a5085c34b0/Thermo-Orbitrap-Exploris-240-Mass-Spectrometer-2.jpg" alt="Thermo Orbitrap Exploris 240 Mass Spectrometer " srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Orbitrap_Exploris_240_Mass_Spectrometer_2_a5085c34b0/thumbnail_Thermo-Orbitrap-Exploris-240-Mass-Spectrometer-2.jpg 175w," sizes="100vw" width="945" height="841"></p><h4><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/401"><strong>Orbitrap Exploris 480 Mass Spectrometer&nbsp;</strong></a></h4><p>Achieve next-level insights, exploratory and targeted quantitation, next-gen power, performance, and ease of use with the Thermo Scientific Orbitrap Exploris 480 Mass Spectrometer.</p><p><strong>Typical applications: </strong>Shotgun proteomics (LFQ DIA, DDA), single cell proteomics, TMT multiplexing, targeted peptide quantification, metabolomics, biopharmaceutical applications (including HCP and protein characterization).</p><p><strong>Analyses: </strong>Targeted / non-targeted screening (MS), Unknown Identification (MS), Confirmation (MS/MS), Absolute and Relative Quantitation (MS and/or MS<sup>2</sup>)</p><p><strong>Resolution powers: </strong>480,000</p><p><strong>Mass range: </strong><i>m/z</i>&nbsp;40 - 6000, (up to 8000 with BioPharma option)</p><p><strong>Scan speed: </strong>40Hz</p><p><strong>Sources &amp; Flexibility: </strong><a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/us/en/home/industrial/mass-spectrometry/liquid-chromatography-mass-spectrometry-lc-ms/lc-ms-accessories/field-asymmetric-ion-mobility-spectrometry-faims.html">FAIMS Pro Duo interface</a>, <a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/order/catalog/product/IQLAAEGABBFAGOMZZZ">APCI/APPI Combination</a>, <a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/order/catalog/product/ES081">EASY-Spray Source</a>, <a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/order/catalog/product/ES071">Nanospray Flex Ion Sources</a>&nbsp;, <a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/cz/en/home/industrial/mass-spectrometry/liquid-chromatography-mass-spectrometry-lc-ms/lc-ms-systems/orbitrap-lc-ms/orbitrap-exploris-mass-spectrometers.html#small">AP-SMALDI<sup>5</sup>&nbsp;AF source for MS Imaging</a></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Orbitrap_Exploris_480_Mass_Spectrometer_2_3d91c9b5b1/Thermo-Orbitrap-Exploris-480-Mass-Spectrometer-2.jpg" alt="Thermo Orbitrap Exploris 480 Mass Spectrometer " srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Orbitrap_Exploris_480_Mass_Spectrometer_2_3d91c9b5b1/thumbnail_Thermo-Orbitrap-Exploris-480-Mass-Spectrometer-2.jpg 235w," sizes="100vw" width="880" height="584"></p>

Wiley LC-MSⁿ Library of Drugs, Poisons and Their Metabolites, 2nd Edition

The Maurer/Wissenbach/Weber LC-MSⁿ Library, 2nd Ed., offers MS² and MS³ spectra for over 2,270 drugs and 3,600+ metabolites. It enables proven metabolite-based LC-MSⁿ screening and is one of the few libraries focused on metabolite spectra.

<h4><strong>Optimize LC-MSⁿ Screening with a Proven Metabolite-Based Library</strong></h4><p>The <strong>Maurer/Wissenbach/Weber LC-MSⁿ Library, 2nd Edition</strong>, offers a powerful screening method using <strong>MS² and MS³ spectra</strong> for over <strong>2,270 parent drugs</strong> and <strong>3,600+ metabolites</strong>. It’s one of the few libraries focused specifically on <strong>metabolite spectra</strong>, improving sensitivity, selectivity, and reducing false negatives in LC-MS analysis.</p><p>Developed for <strong>clinical and forensic applications</strong>, the library helps confirm compound identity and detect metabolites even when parent analytes are suppressed. It also reduces false positives through characteristic metabolite patterns.</p><p>Includes instrument-specific training materials on <strong>sample prep</strong>, <strong>chromatography</strong>, and <strong>MS settings</strong>.</p><h5><strong>Library Specs:</strong></h5><ul><li>Spectra: &gt;13,000</li><li>Structures: 10,787</li><li>Compounds: &gt;2,270</li><li>Metabolites/Artifacts: &gt;3,600</li><li>Endogenous Molecules: 90</li></ul><p>Search compound coverage at <a target="_blank" rel="noopener noreferrer" href="https://spectrabase.com/"><strong>compoundsearch.com</strong></a>.</p>

Products focused on LC/MS/MS - page 2

Related content

Why Nitrogen Is Costing Labs More Than Ever — And How to Reduce the High Price Tag

News from LabRulezLCMS Library - Week 21, 2026

Let´s Connect a whole (U)HPLC system without tools and trouble